View
0
Download
0
Category
Preview:
Citation preview
- 1 -
UAV Solutions For Surveying and mapping
- 2 - - 1 -
Driven by a relentless pursuit of innovation, DJI has revo-
lutionized the way people create and is now ushering in
a new generation of work by helping people understand
and adopt drone technology. Thus, came DJI Enterprise
– a global team dedicated to fostering an ecosystem for
businesses to empower individuals, enhance jobs and
digitize operations. DJI’s drone technology and the DJI
platform provide a new way for the surveying and map-
ping industry to optimize project management, streamline
workflows, and minimize risks.
About DJI Enterprise
- 2 - - 3 -
Solutions for Surveying and mapping
Upgrade your next mapping mission with the Phantom 4 RTK – DJI's most compact, accessible and accurate low altitude mapping solution.
TimeSyncGS RTK APP DJI Cloud PPK Service*
1''COMS Sensor D-RTK 2 GNSS Mobile Station
RTK Module
Diagonal Distance 350 mm
Weight 1391 g
Max Flight Time Approx. 30 minutes
Max Speed 31 mph (50 kph) (P-mode)36 mph (58 kph) (A-mode)
Max Service Ceiling Above Sea Level 6000 m
Max Wind Speed Resistance 10 m/s
Sensing System Forward, Backward, Downward
Max Transmission Distance 7 km
Supported Remote Controller
Phantom 4 RTK Standard Remote Controller, SDK Remote Controller
Software Supported
DJI GS RTK (Built into the Standard Remote Controller)DJI TerraDJI GS Pro (SDK Remote Controller)DJI Pilot (SDK Remote Controller)Third Party Software (SDK Remote Controller)
Specs
Drone Platforms
The GS RTK app supports multiple planning modes including Photogrammetry (2D and 3D), Linear Flight Mission, Waypoint Flight, Terrain Awareness, and Block Segmentation. Users can control multiple aircraft in Block Segmentation.
*
- 4 - - 5 -
Gather precise plant-level data using the P4 Multispectral – a high-precision drone with a seamless-ly integrated multispectral imaging system built for agriculture missions, environmental monitoring, and more.
Diagonal Distance (Propellers Excluded)
350mm
Takeoff Weight 1487g
Max Flight Time Approx. 27 minutes
Differential Data Format RTCM 2.X/3.X
Max Ascent Speed
6 m/s (automatic flight); 5 m/s (manual control)
Max Service Ceiling Above Sea Level
19685 ft (6000 m)
Operating Temperature 0° to 40° C (32° to 104° F)
Max Transmission Distance
7 km
Filters
Blue (B): 450 nm ± 16 nm; Green (G): 560 nm ± 16 nm; Red (R): 650 nm ± 16 nm; Red edge (RE): 730 nm ± 16 nm; Near-infrared (NIR): 840 nm ± 26 nm
Sensors
Six 1/2.9” CMOS, including one RGB sensor for visible light imaging and five monochrome sensors for multispectral imaging.Each Sensor: Effective pixels 2.08 MP (2.12 MP in total)
Image Position Compensation
The relative positions of the centers of the six cameras’ CMOS and the phase center of the onboard D-RTK antenna have been calibrated and are recorded in the EXIF data of each image.
Mapping Software Supported
DJI TerraThird-party software
Flight Control Software DJI Ground Station Pro (DJI GS Pro)
Specs
TimeSync5-Band MultispectralImaging System
Live NDVI View RTK Module
The ultimate platform for aerial productivity combines a rugged design and simple configurability to work as a solution for a variety of industrial applications. It is compact and highly expandable, with intelligent control systems, improved flight performance, high precision RTK modules and the TimeSync system.
Diagonal Distance 643 mm
Weight Approx. 4.69 kg (with two TB55 batteries)
Max Payload 1.23 kg
Max Flight Time 38 min
Max Speed 81 kph (50.3 mph)
Max Service Ceiling Above Sea Level 3000 m
Max Wind Speed Resistance 39.4 ft/s (12 m/s)
Sensing Systems Forward, Downward, Upward
Max Transmission Distance 8 km
Compatible Payloads
Zenmuse X7, Zenmuse X5S, Zenmuse Z30, Zenmuse XT2, Third-party Payloads
Specs
Discreet ModeAnti-CollisionBeacon
1-Clidk UpgradeOcuSync 2.0 TimeSyncIP43
- 6 - - 7 -
The Matrice 600 Pro boasts a modular design that enables outstanding flight performance. With a max payload of 6 kg and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.
D-RTK 2 Mobile Station is DJI’s upgraded high-precision GNSS receiver that supports all major global satellite navigation systems, providing real-time differential corrections that generate centi-meter-level positioning data for improved relative accuracy.
Diagonal Distance 1133 mm
Weight 9.5 kg (with six TB47S batteries)10 kg (with six TB48S batteries)
Max Takeoff Weight Recommended 15.5 kg
Max Hovering Time No payload: 38 min (with six TB48S batteries)
Max Speed 65 kph (no wind)
Max Service Ceiling Above Sea Level 2170R propellers: 2500 m;2195 propellers: 4500 m
Max Wind Speed Resistance 8 m/s
Hovering Precision Vertical: ±0.5 m,Horizontal: ±1.5 m
Max Transmission Distance 5 km
Compatible Payloads Ronin-MX, Zenmuse Z30, Zenmuse XT2
GNSS Frequency
Simultaneously receive:GPS: L1 C/A, L2, L5BEIDOU: B1, B2, B3GLONASS: F1, F2Galileo: E1, E5A, E5B
Positioning Accuracy
Single PointHorizontal:1.5 m(RMS)Vertical:3.0 m(RMS)RTKHorizontal:1 cm+ 1 ppm(RMS)Vertical:2 cm+ 1 ppm(RMS)
Positioning Update Rate 1 Hz, 2 Hz, 5 Hz, 10 Hz and 20 Hz
Differential Data Format RTCM 2.X/3.X
IP Rating IP65
Operating Temperature 4° to 131° F (-20° to 55° C)
Other Function Support 5 Phantom4 RTK remote controllers at the same time
Specs
Specs
- 8 - - 9 -
Software
Mission Planning
Create waypoint, area, oblique, and corridor mission plans to fit your workflow needs. You can also plan a mission using an imported model or save the current flight routes for future missions.
DJI GS Pro is an iPad app designed to enhance drone operations. Conduct automated flight mis-sions, manage flight data on the cloud, and collaborate across projects to efficiently run your drone program.
2D Maps
Real-time 2D Mapping
Quickly generate a 2D orthomosaic of the se-lected area in real-time. Not only is this ideal for creating detailed flight paths in remote areas but it’s also useful for time-sensitive missions that require quick decision-making on site.
2D Reconstruction
Generate high resolution orthomosaics, en-abling you to get detailed and accurate mea-surement results for all your critical projects.
2D Multispectral Reconstruction1
Process multispectral images to generate veg-etation indices like NDVI and NDRE, gathering actionable insights that improve crop yields and help manage vegetation.
1. Supported aircraft: P4 Multispectral
2. Feature only available when using the Phantom 4 RTK, Phantom 4 Pro V2.0, and Phantom 4 Pro + V2.0
Flight Planning
3D Map Area:
Generate efficient flight missions with custom flight zone and camera parameter settings.
3D Map POI:
Simply choose the subject and set a distance between it and the aircraft. DJI GS Pro will then provide relevant parameters including speed and time required to circuit the structure. Images captured can be exported into 3D re-construction software to create accurate 3D models of the entire structure.
Tap and Go Waypoint Flight:
Users can set waypoints and relevant parame-ters, define waypoint actions, then start flying with a tap.
3D Models
Real-time 3D Point Cloud2
When efficiency is key, a 3D point cloud of the mapped area can be quickly rendered and vi-sualized based on DJI’s advanced algorithm, to display the area and meet the need for ac-curate measurement.
3D Reconstruction
Get sharp and realistic representations of your surroundings throughout various industrial ap-plications, be it accident reconstruction, track-ing progress on major construction projects and more.
Operation Management
Fleet and Pilot Management:
Manage pilots and drones through the cre-ation of teams and optimize workflow by des-ignating roles with different permissions.
Flight Data Management:
Back up flight data securely on the cloud, giv-ing missions higher reliability and accuracy.
Project Management:
Improve the efficiency of your drone oper-ations by tracking individual projects and streamlining the project management process.
*
- 10 - - 11 -
DJI FlightHub is a comprehensive web-based management platform for your drone operations.
DJI Pilot is a robust App developed specifically for enterprise users to unleash the power of their DJI drones. With development made specifically for each Enterprise drone platform, DJI Pilot optimizes your flight capability for peak performance.
Live Operations
Enhance project coordination with real-time in-formation from remote drone operations.
Flight Data
Improve operations management and ensure regulatory compliance with easy flight log re-cording.
Fleets & Pilots
Increase team efficiency and communication by organizing your teams and records around projects.
Mapping Solutions
Two Ways to Deploy FlightHub:
Secure Cloud Access
FlightHub stores your flight logs on a stable, US-based AWS server with operational stan-dards pre-assessed to match SOC2 standards.
Private Cloud Access
Utilize your existing organizational resources by managing all your commercial drone opera-tions within your private network.
Mission Planning
Manage operational tasks within teams more ef-ficiently with easy-to-use mission planning tools.
- 12 - - 13 -
Precise Mapping Solution Without GCPs
Adaptable Mapping Solution
Aircraft Phantom 4 RTK
Payloads Integrated camera
Apps/Software Supported
Flight Control: • GS RTK• DJI Terra• GS Pro• DJI Pilot with third-party mapping and photogrammetry software
Training DJI Flight Simulator
Aircraft M210 RTK V2
Payloads Zenmuse X7 +35mm/24mm Lenses
Apps/Software Supported• DJI Terra• GS Pro• DJI Pilot /Pilot PE
Operation Management Software DJI FlightHub
Training DJI Flight Simulator
High-Resolution Imaging Solution
Specialized Payload Solutions
Aircraft M600 Pro
Payloads Hasselblad A6D, Ronin MX
Apps/Software Supported GS Pro, with third-party mapping software
Operation Management Software DJI FlightHub
Training DJI Flight Simulator
Aircraft M200 Series V2 M600 Pro
Payloads Third-party Payloads (LiDAR sensors, oblique cameras, multispectral sensors, hyperspectral sensors, etc.)
Apps/Software Supported Third-party Software
Operation Management Software DJI FlightHub
Training DJI Flight Simulator
Onsite Data Collection
Data Processing
Identify Mapping Mission
Aerial Images
POS data
GCP Measurement
(optional)
Investigate the site
Checkpoint measurement
(optional)
Aerial triangulation
Verify accuracy
Set up GCPs (optional)
Plan Flight Missions
Execute Flight
Generate DSM
DSM resultsAerial triangulation results
Generate DOM
DOM results
Generate 3D models
Dense point cloud
3D models
Acquire POS data+aerial images
Fails the standard
Meets the standard
Aerial Mapping Workflows
- 14 -
Website
https://enterprise.dji.com
enterprise@dji.com
Follow us @DJIEnterprise
A TRADITION IN PRECISION
Seattle 425-771-7776 I Tacoma 253-922-6087 I Portland 503-641-3388Las Vegas 702-586-1152 I Salt Lake City 801-878-9763 I St. George 801-878-9763
www.krinc.net
Recommended