View
6
Download
0
Category
Preview:
Citation preview
SUPPLY CHAIN MANAGEMENT (SCM) PRACTICE
TOMY ANAK AUGUSTINE PAKA
This project is submitted in partial fulfillment of the requirements for the degree of
Bachelor of Engineering with Honours
(Mechanical Engineering and Manufacturing Systems)
Faculty of Engineering
UNIVERSITI MALAYSIA SARAWAK
2006
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
For my beloved family.
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
ACKNOWLEDGEMENT
Thanks to God as the author had managed to complete his final year project
successfully with the help from several people.
The author would like to express his first gratitude and great appreciation to
his supervisor; Pn. Magdalene Andrew Munot for his excellent guidance, supervision
and full support throughout the completion of this project.
The author also would like to thanks the lecturers and staff of the Faculty of
Engineering of Universiti Malaysia Sarawak for their guidance and advice in
completing this project.
Finally yet importantly, the author would like to thanks his colleagues,
friends and beloved family for their support and encouragement from the beginning
until this project is finished.
i
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
ABSTRACT
Manufacturers are facing intensifying challenges from both local and
international competitors in the marketplace. In order to survive, manufacturers must
be able to manage the dynamic market variables and satisfy their customers better
than their competitors. One of the alternatives that seek to leverage manufacturers'
ability to compete is developing a high standards relationship starting with their
customers and ending with their vendors, which defines the term Supply Chain
Management (SCM). Yet, effective management of supply chain is not easy to
accomplish because of few constraints. The objectives of this study are to investigate
the factors causing poor SCM and effects of poor SCM. In this study, one company
has been selected as a sample selection. A few methods were used in this study to
figure out the problems or factors causing poor SCM and its effects to the company.
The methods are survey questionnaire, observation and personal interview. As a
result, six problems that cause poor supply chain in the company was identified. The
problems are storage problem, fluctuation of raw materials price, late shipment of
raw materials by the suppliers, late delivery of finish products to the customers,
wrong information distribution during the production and manpower shortage. The
company experience effects such as high production cost, severe backlog, poor
customer service, loss sales and customers and delay in production from the
problems face. In this report, few recommendations are listed for the company as a
guideline towards a successful SCM practice.
11
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
ABSTRAK
Dalam era ini para pengilang menghadapi persaingan hebat daripada pesaing
tempatan dan pesaing antarabangsa dalam pasaran. Untuk kekal dalam persaingan,
para pengilang perlu berupaya mengendalikan perubahan yang dinamik dalam
pasaran di samping memenuhi keperluan pelanggan dengan jayanya berbanding
dengan para pesaing. Salah satu alternatif yang berupaya meningkatkan daya saing
pengilang ialah melalui pembentukan hubungan yang kuat dan standad bermula
daripada pelanggan hingga ke pembekal. Hubungan yang standad ini dinamakan
sebagai `Supply Chain Management (SCM)'. Pengurusan yang efektif tidak dapat
dicapai dengan mudah kerana terdapat pelbagai halangan dalam pengurusan rantaian
bekalan. Tujuan kajian ini adalah untuk menyelidik faktor-faktor yang menyebabkan
SCM menjadi lemah dan kesan-kesan yang dihadapi ekoran daripada pengurusan
yang lemah. Untuk kajian ini sebuah kilang pembuatan telah dipilih untuk dijadikan
sebagai sampel kajian. Dalam kajian ini beberapa kaedah telah digunakan untuk
menyelidik faktor-faktor yang menyebabkan SCM yang lemah dan sterusnya
mengkaji kesan-kesan yang dihadapi oleh kilang akibat daripada SCM yang lemah.
Kaedah-kaedah yang digunakan ialah soalan soal selidik, tinjauan dalam kilang dan
temuramah. Kajian ini mendapati enam masalah yang menyebabkan SCM yang
lemah iaitu, masalah gudang, kenaikan harga bahan mentah yang tidak menentu,
penerimaan bahan mentah yang lewat daripada pembekal, penghantaran yang lewat
kepada pembekal, informasi yang salah sepanjang produksi, dan kekurangan tenaga
pekerja. Di dalam kertas laporan ini beberapa cadangan diberikan sebagai panduan
untuk SCM yang efektif clan berjaya.
111
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
TABLE OF CONTENTS
PAGE NUMBER
BORANG PENGESAHAN STATUS TESIS
APPROVAL SHEET
PROJECT TITLE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
ABSTRAK
TABLE OF CONTENTS
LIST OF ABBREVIATION
LIST OF FIGURES
LIST OF TABLES
CHAPTER 1: INTRODUCTION
1.1 Global competition
1.2 Supply chain management
1.3 Problems statement
1.4 Objectives
CHAPTER 2: LITERATURE REVIEW
2.1 Introduction
2.2 Supply chain management (SCM) concept
i
11
111
iv
vii
viii
ix
I
2
4
5
6
6
iv
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
2.3 Objective of Supply Chain Management (SCM) 7
2.4 Factors for Successful Supply Chain Management (SCM) 7
2.5 Problem Associated with SCM 8
2.5.1 Demand amplification (bullwhip effect) 8
2.5.2 Supply Chain Complexity 10
2.5.3 Uncertainty in Supply Chain Management (SCM) 12
CHAPTER 3: METHODOLOGY
3.1 Introduction
3.2 Sample Selection
3.3 Data Collection Procedure
3.4 Data Collection Method
3.5 Data Analysis
CHAPTER 4: RESULTS AND DISCUSSION
4.1 Company Background
4.2 Survey Questionnaire
4.3 Data Obtained Through Personal Interview Session
4.4 Data Obtained Through Observation
CHAPTER 5: CONCLUSIONS AND RECOMMENDATIONS
5.1 Conclusion
5.2 Recommendation
14
14
16
17
19
20
21
22
29
33
34
V
Demo (
Visit h
ttp://
www.pdfsp
litmerg
er.co
m)
REFERENCES
APPENDIX A
APPENDIX B
SUPPORT LETTER
39
vi
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
LIST OF ABBREVIATION
SCM Supply Chain Management
CIM Computer Integrated Manufacturing
vii
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
LIST OF FIGURES
FIGURE PAGE NUMBER
I An outline for the research methodology 15
viii
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
LIST OF TABLES
TABLE PAGE NUMBER
I Observed Problems Related to Supply Chain
Management Practice 30
IX
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
CHAPTER 1
INTRODUCTION
1.1 Global Competition
Today's global competitive business environment changes much faster than it
did twenty years ago, primarily because of advances in the growing global economy
(Hayes and Gary, 1994). Global competition is transforming the way products are
produced and moved around the world (Prasad and Sounderpandian, 2003). As
consequences, every manufacturing and distribution step, from raw materials up to
final products, could in principle be included into a "supply chain" connecting
material suppliers, manufacturers, distributors and also customers (Villa, 2001).
According to Lummus and Vokurka (1999), firms can no longer effectively
compete in isolation of their suppliers and other entities in the supply chain. In order
survive, manufacturers must be able to manage the dynamic market variables and
satisfy their customers better than their competitors (Khaled et. al., 2003). To do this,
a supply chain manager must identify and control the factors that influence the
performance of the three areas, namely, procurement, processing and distribution
(Prasad and Sounderpandian, 2003).
I
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
Rainbird (2004) point out that the notion that organizations have supply
chains that required active management to maximize efficiency is well recognized".
Many companies have identified the logistic or supply chain management process as
an area of opportunity to add value, whereby they can reduce costs and increase
efficiencies (McMullan, 1996). Industry groups are now working together to improve
the integrative process of supply chain management and accelerate the benefits
available through successful implementation (Lummus and Vokurka, 1999).
1.2 Supply Chain Management (SCM)
Lummus and Vokurka (1999), describes supply chain as the processes from
the initial raw materials to the ultimate consumption of the finish product linking
across supplier-user companies and the functions within and outside a company that
enable value chain to make products and provides services to the customer. While
Mark (2004), define supply chain as the integration of business processes from end
user through original suppliers that provides products, services, and information and
add value for customers. Khaled et. al. (2003), state that in manufacturing this supply
chain is the linkage for the physical movement of all materials from suppliers,
through transformation and then as finished goods for the customers.
According to Ahmed et. al. (1997), the current accepted European definition
of SCM is the strategic management process, unifying the systematic planning and
control of all technologies, materials and services, from identification of need by the
ultimate customer. Lummus and Vokurka (1999), described SCM as an integrating
philosophy to manage the total flow of a distribution channel from supplier to
ultimate customer. Khaled et. at. (2003) mentioned that SCM is based on the
2
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
integrated planning, control and monitoring of information and production flows
along the whole supply chain, from the first vendor to the end customer and vice
versa.
According to Lourenco(2001), supply chain consists basically on the
following elements: suppliers, manufacturing centers, warehouses, distribution
centers, transportation systems, retail outlets, and customers; raw material, work-in
process inventory, finished good and information that flow between the different
elements.
While Joshi (2000) state that supply chain consists of a number of units
beginning with suppliers, who provide raw materials to factories or manufacturing
plants, which manufacture products and send them to regional distributors or
wholesale dealers, who ship them to retailers. The end of a traditional supply chain is
usually the customer, who buys products from the retailer. In addition Joshi (2000)
simplify that every company performs five basic activities in its supply chain which
is buy, make, move, store and sell.
According to Khaled et. al. (2003), considering material comprises a large
component of the sales dollar, companies can reap large profits with a small
percentage reduction in the cost of materials and this is one reason why SCM is
becoming a key competitive weapon. Indeed across a number of industries, including
retail sector, supply chain efficiency has become dominant corporate paradigm,
driving firm"s business models and at least in the short term delivering improved
profitability (Mark, 2004). In addition, Spekman et. al. (2002) highlight that in an
3
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
integrated supply chain, benefits range from reduces costs, to improved process to
better quality.
1.3 Problem Statements
Demand amplification is a well known phenomenon in the supply chain.
According to Banamyong et. al. (1999) demand amplification or known as bullwhip
effect is created by the misinterpretation of feedback by decision makers in the
supply chain. It causes cycle of excessive inventory and severe backlogs, poor
product forecast, unbalanced capacities, poor customer service, uncertain production
plans and high backlog costs, or sometimes even lost sales.
According to Hoole (2005), complexity simply evolves over time from the
cumulative outcome of many seemingly unrelated functional decisions. Often this
complexity comes through product and brand proliferation, but this it also can come
through the organizational structures and management processes that have grown up
over time (Christopher, 2000). With respect to complexity of external organizational
systems, the number of suppliers is often identified as a factor contributing to the
complexity of the supply chain (Milgate, 2001).
In addition the complexity of the dynamics of the supply chain has led to the
isolation of many different sources for this distortion such as flows of information
between and within companies, material flow between companies (Power et. al.
2001).
4
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
According to Milgate (2001), uncertainty exists at every echelon in the
supply where uncertainty can be manifested through late deliveries by suppliers or
poor quality of the incoming materials and parts. This statement supported by Yu et.
al. (2001), where uncertainties are caused by delayed of deliveries, machine
breakdowns, order fluctuation, etc., which necessitate increased inventories. In
addition, productivity and supply chain performance is decreased by the uncertainty
in the supply chain (Vrijhoef and Koskela, 2000).
1.4 Objectives
This study aims to help manufacturing company to be more competitive in
global market through the implementation of SCM. The objectives of this study are:
1. To investigates factors causing poor SCM practice.
2. To investigates effects of poor SCM practice.
3. To provide guideline for good SCM practice.
5
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
CHAPTER 2
LITERATURE REVIEW
2.1 Introduction
The supply chain encompasses all activities associated with the flow and
transformation of goods from raw material stages through to the end users, as well as
the associated information flows (Lourenco, 2001). According to Khaled et. al.
(2003) supply chain management seeks to synchronize a corporation's operation and
those of its suppliers to match the flow of materials, services and information with
customer demand.
2.2 Supply Chain Management (SCM) Concept
SCM is a set of approaches utilized to efficiently integrated suppliers,
manufacturers, warehouses and stores; so that merchandise is produced and
distributed at the right quantities, to the right location, and at the right time, in order
to minimize system wide costs while satisfying service level requirements
(Lourenco, 2001). According to Disney and Towill (2003), a supply chain is a
system consisting of material suppliers, production facilities, services and customers
who are linked together via the downstream feed-forward flow of materials
(deliveries) and the upstream feedback flow of information (orders).
6
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
In addition, SCM is an integrative approach for planning and controlling the
material flow from suppliers to end-users (Banamyong and Nair, 1999).
2.3 Objective of Supply Chain Management (SCM)
According to Banamyong and Nair (1999) the goal of SCM is to meet
customer service objectives while simultaneously minimizing inventory and
associated costs. In Joshi (2000) point of view, SCM goal is to meet customer
demand for guaranteed delivery of high quality, low cost, customized products with
minimal lead-time. In addition, SCM is a key strategic factor for increasing
organizational effectiveness and for better realization of organizational goals such as
enhanced competitiveness, better customer care and increased profitability.
2.4 Factors for Successful Supply Chain Management (SCM)
Khaled et. al. (2003) point out that successful SCM requires a high degree of
functional and organizational integration. According to Spekman et. al. (2002),
successful SCM has been linked to communications frequency and quality. Success
in SCM usually derives from understanding and managing the relationship between
inventory cost and the customer service level (Waller et. al. 2001).
A look into the requirement for successful implementation of these software
and requirements of supply chains of today points of real time information visibility
as one of the crucial factors for efficient SCM (Joshi, 2001). Five critical
performance levers have the greatest impact on supply chain performance:
7
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
configuration; management practices; external relationships; organization and system
(Hoole, 2001). In addition, the key success of SCM may lay in the system's
integration, i. e. requires emphasis on integration of activities, cooperation,
coordination and information sharing throughout the entire supply chain.
2.5 Problem Associated with SCM
2.5.1 Demand amplification (bullwhip effect)
Demand amplification is a well known phenomenon in the supply chain.
According to Banamyong et. al. (1999), demand amplification is created by the
misinterpretation of feedback by decision makers in the supply chain. It causes cycle
of excessive inventory and severe backlogs, poor product forecast, unbalanced
capacities, poor customer service, uncertain production plans and high backlogs
costs, or sometimes even lost sales.
The bullwhip effect is referred to the phenomena where orders to the supplier
tend to have larger variance than sales to the buyer, and the distortion amplifies
upstream in the supply chain (Amours ei. al. 1998). The source of such fluctuation
and amplification of order and inventory is mainly due to the lack of sharing of
production information between enterprises in the supply chain (Lau ei. al. 2002).
In other words, the bullwhip effect occurs when the demand order variability
in the supply chain are amplified as they moved up the supply chain (Lee et. al.
1997). These distortions are amplified from one level to another level in a supply
chain and are considered to be one of the biggest causes of inefficiencies in a supply
8
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
chain. Disney and Towill, (2003) state that there are five fundamental causes of
bullwhip; non-zero lead-times, demand signaling processing, price variations,
rationing and gaming and order batching.
Solution to demand amplification
According to Verwijmeren (1996), networked inventory management takes
away the amplification of demand and supply between organizations in the supply
chain, because the integrated decision system exploits the dependence between the
stock points in different organizations. The author stated that networked inventory
management information system is networked information systems which are applied
to networked inventory management. Each networked inventory information system
provides for a part of the information processing that is needed for the decision
system in the networked inventory management.
The role of freight forwarders in the international supply chain has become
more important in recent years as they have expanded and diversified their
operations worldwide (Banamyong et. al. 1999). The advent of containerization and
information technology has led them to increase their responsibility toward SCM. It
is their duty to make the supply chain competitive and to improve the efficiency of
their clients' logistics function. In theory, if a firm is able to provide a fully
integrated logistics service, it will be able to effectively gain competitive advantage.
This is due to the fact that the integrated firm will be able to control the sourcing
process, the manufacturing or assembly process and the distribution process. This
can be done with the help of the freight forwarders. The challenge for the freight
forwarding industry is to have a more cooperative relationship with their customers
9
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
in order to maximize the information flow while trying to manage the material flow.
The result will be, in theory, the avoidance of demand amplification.
According to Spekman et. al. (2002), successful SCM has been linked to
communications frequency and quality (e. g. information flows reflected in the
quality of information shared and the amount of information). From the studies of
bullwhip effect, one of the remedies is to share information along the supply chain
(Lau et. al. 2002). It has been reported that the benefit of information sharing is
significant, especially in reducing the bullwhip effect and supply chain costs. By
using the shared information each supply chain entity can make better decisions on
ordering, capacity allocation and production/material planning so that the supply
chain dynamics can be optimized.
2.5.2 Supply Chain Complexity
According to Hoole (2005), complexity simply evolves over time from the
cumulative outcome of many seemingly unrelated functional decisions. Often this
complexity comes through product and brand proliferation, but this it also can come
through the organizational structures and management processes that have grown up
over time (Christopher, 2000). With respect to complexity of external organizational
systems, the number of suppliers is often identified as a factor contributing to the
complexity of the supply chain (Milgate, 2001). In addition, the complexity of the
dynamics of the supply chain has led to the isolation of many different sources for
this distortion such as flows of information between and within companies, material
flow between companies (Damien et. al. 2001).
10
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
As the customers' demand shift quickly and the business complexity
increases, there is an adverse impact on requirements interpretation, delivery cycle
time, flexibility and cost (Lau and Lee, 2000). Thus, the complexity of the supply
chain arises from the number of echelons in the chain and the number of facilities in
each echelon (Beamon, 1999).
Solution to supply chain complexity
According to Lau and Lee (2000), different enterprises may run various
sectors of business and subsequently the physical supply chains are also dissimilar.
In this respect, various business objects should be built in accordance with the
dissimilar work natures. With the help of object technology, all kinds of supply chain
activities can be represented as objects and incorporated into the supply chain
information system. An innovative supply chain management enables the global
production of a commodity by customizing the value chain and optimizing each step
to meet the customer's needs best.
In supply chain management, the focus is related to the managing of suppliers
as well as the flow of parts. Smart technology provides the optimum coordination
among the partners and monitoring of the parts flow. Smart card contains one or
more electronic chips and looks like a regular credit card but can store information
and perform functions, such as digital signatures for security purposes or storing
value that can be used for purchases. MS Smart Card Operating System (a built-in
feature for Windows 2000) is especially designed to work with the processing power
of smart cards. Users will be able to configure their own smart card operating system
and create applications using the power and familiarity of Visual C++ 6.0 and Visual
11
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
Basic 6.0. The smart card will link with the MS SCOS to ensure that data interchange
between the card and the computer can be achieved in an effective way.
2.5.3 Uncertainty in Supply Chain Management
According to Milgate (2001), uncertainty exists at every echelon in the
supply where uncertainty can be manifested through late deliveries by suppliers or
poor quality of the incoming materials and parts. This statement supported by Yu el.
al. (2001), where uncertainties are caused by delayed of deliveries, machine
breakdowns, order fluctuation, etc., which necessitate increased inventories. In
addition, productivity and supply chain performance is decreased by the uncertainty
in the supply chain (Vrijhoef and Koskela, 2000).
Uncertainty is associated with customer demand, and internal and external
supply deliveries throughout the supply chain (Sabri and Beamon, 2000). Product
demand variability can be identified as one of the key sources of uncertainty in any
supply chain (Gupta and Maranas, 2000). In addition, Yu et. al. (2001) mentioned
that there are three distinct sources of uncertainty that affect a supply chain:
suppliers, manufacturers and customers.
Solution to uncertainty in supply chain management
The reason for uncertainties is that perfect information about the system
cannot be secured. (Yu ei. al. 2001). While every single member has perfect
information about itself, uncertainties arise due to a lack of perfect information about
other members. To reduce uncertainties, the supply chain member should cooperate
and obtain more information about other members. If the members are willing to
12
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
cooperate, each of them will have more information about others. Therefore, the
whole system's performance will be improved. This cooperation among supply chain
management can be called a supply chain partnership.
According to Childerhouse and Towill (2000), the application of the strategic
stock has long been used to buffer against uncertainties. One well known application
of the strategic use of stock in supply chain revolves around the use of a physical de-
coupling point. The de-coupling point is the point of differentiation between order
driven and forecast driven planning. The strategic stock at the de-coupling point is
used to buffer against fluctuating customer orders and/or product variety. The
application of a de-coupling point before the point of product differentiation is called
postponement and reduces the risks of both stock outs and holding excess stocks.
13
Demo (
Visit h
ttp://
www.pdfsp
litm
erge
r.com
)
Recommended