View
214
Download
0
Category
Preview:
Citation preview
Distributed or Represented by
PRODUCTS
Note■ We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our official sales channel.
■ We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this catalog will be available in the future. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products
■ We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications.This may be accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual non-conforming product, or in other ways deemed necessary. In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any potential compensation.
■The content of this catalog is as of April 2018
ELECTRONIC
COMPONENTS &
DEVICES
Notes on Safety■ Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring.
■ Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications.
■ The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or property. In addition, our products are not intended to be used in specific applications that may cause a major social impact. Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications.
NIPPON CHEMI-CON CORPORATIONhttp://www.chemi-con.co.jp/e/
CAT.No.
Aluminum Electrolytic Capacitors 1001
Multilayer Ceramic Capacitors 1002
Film Capacitors 1003
Metal Oxide Varistors TNRTM 1006
Nanocrystalline / Amorphous / Dust Choke Coils 1008
Electric Double Layer Capacitors 1009
Camera Modules
'18.04
2 0 1 8
CAT.NO.E1002X / E1006A / E1003U / E1008S
CERAMIC CAPACITORS
VARISTORS
FILM CAPACITORS
CHOKE COILS
E nglish
NIPPO
N C
HEM
I-CO
N2
01
8 M
LCC / Varistors / Film
Capacitors / Choke Coils [ English ]
Production Guide
Product Specifications
P102-107
P108-122
Series TablePart Numbering SystemMinimum Packaging QuantityPrecautions and Guidelines
TACE SeriesTACD SeriesTACC SeriesTACB SeriesHACE SeriesHACD SeriesHACB Series
P102P103P104P106
P108P109P112P113P116P117P120
FILM CAPACITORS
101 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FILM CAPACITORS SERIES TABLE, GROUP CHART
High capacitance Downsized
Downsized
Anti-vibration
Anti-vibration
TACC TACB
HACB
HACE
HACD
TACD TACE
◆Metallized polypropylene film capacitorsHigh frequency use
High voltage, High frequency use
Series Major uses
High frequency use, metallized polypropylene film.Permissible large current and anti-vibration
250 to 1000Vdc
0.47 to 22
0.033 to 22
0.033 to 22
0.18 to 1.5
0.0033 to 1.5
0.001 to 1.2 -40 to +105
1.0 to 18
250 to 1000Vdc
450 to 1000Vdc
250 to 800Vdc
630 to 2000Vdc
630 to 4000Vdc
630 to 4000Vdc
High frequency use, metallized polypropylene film.Standard type (Downsizing of TACB series)
High frequency use, metallized polypropylene film.Large capacitance type of TACB series
High frequency use, metallized polypropylene film.
High frequency use, metallized polypropylene film.High voltage type and anti-vibration
High frequency use, metallized polypropylene film.High voltage type of TACD series (Downsizing of HACB series)
High frequency use, metallized polypropylene film.High voltage type of TACB series
Ratedvoltage range
RatedCapacitance range
(μF)
Categorytemperature range
(℃)Page
TACE
TACD
TACC
TACB
HACE
HACD
HACB
-40 to +105
-40 to +105
-40 to +105
-40 to +105
-40 to +105
-40 to +105
120
117
116
113
112
109
108
102 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(Example:TACD series 250V 0.82μF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
*Others (Refer to the standard ratings .)
This is eigenvalue. The details are standard ratings.
(Lead Forming Code)
(Voltage code)
(Series code) (Size code)
(Lead Spacing Code)
(Terminal code)
(Capacitance code)Unit of capacitance with (pF),and a sign of capacitance (Lead Length Code)expresses it in 3 characters.significant digit(two columns) + index(one column) unit : pF(Example :1μF[1,000,000pF]="105")
(Capacitance tolerance code)(Supplement Code)
This is eigenvalue. The details are standard ratings.
Terminal
V Copper Wire
3B2 3150402 4000
152
K
Series nameTACETACDTACCTACBHACE
Voltage(V)250
HJ
±3±5
Z Standard
Code tolerance(%)
M 5.0S Special
20.0
±10
U N
E 22.5
Tin plated copper clad steel wireN 1 21.5
J41.5
W51.5
Code Dimensions(mm)
V H 17.5Tin plated copper wire
54 terminals tab
Code 0 16.5
Code Series Code Type Code
D 15.0
2G 12.5
P631 C 10.0
B 7.5501 500630 162
Code Dimensions(mm) コード Dimensions(mm)401 400 1C23B1 315 102 202 2000
252 2500
251 801Code Code Voltage(V) Code Voltage(V)
182 1800
ECAHBCAT
L Type B
HACBBCAHDCAT
A Straight leadF Type A
HACD
Code Type
DCAHECAT
CCAT
Code Series nameCode
Tol.(%)ContentsCodeFilm
CapacitorsF
250251
Code Forming StyleB epyTL5±DCATDCAT
Z Standard0.82824
Z 0
Cap.(µF) edoCedoC
J D L C
Dimensions(mm)
V 8 2 4D 2 5 1F T A C
Voltage(V)CodeC 10.0
Code Dimensions(mm)
Category Series code Capacitancecode
Terminal codeVoltage code Capacitancetolerance
Size code Lead FormingCode
Lead SpacingCode
Lead LengthCode
SupplementCode
Type A Type B
J
8001000125015001600
F 27.5Q
4
25.026.5
30.037.5
47.5
FILM CAPACITORS
Part Numbering System
PART NUMBERING SYSTEM
103 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FILM CAPACITORS PACKAGING
Minimum Packaging QuantityPlease order by units of minimum packaging quantity.◆Metallized polypropylene film capacitors
FILM CAPACITORS PACKAGING
Series Voltage (Vdc)
Rated Capacitance (μF)
Bagged (pcs/box) Boxed (pcs)
TACE
250 15 to 18 - 20022 - 150
400 6.8 to 8.2 - 20010 to 12 - 150
630 0.47 to 3.3 - 2004.7 - 150
1000 0.47 to 1.0 - 2001.5 - 150
TACD
250
0.82 to 1.2 600 -1.5 to 1.8 500 -
2.2 400 -2.7 300 -
3.3 to 3.9 500 -4.7 400 -
5.6 to 8.2 300 -10 to 12 200 -
15 150 -
315
0.33 to 0.68 800 -0.82 600 -
1.0 to 1.8 500 -2.2 to 2.7 300 -
3.3 500 -3.9 400 -4.7 300 -5.6 200 -
6.8 to 8.2 200 -10 to 12 150 -15 to 22 100 -
400
0.22 to 0.27 800 -0.33 to 0.68 600 -0.82 to 1.0 400 -1.2 to 1.5 300 -1.8 to 2.7 400 -3.3 to 3.9 300 -
4.7 200 -5.6 to 6.8 200 -
8.2 150 -
500
0.22 to 0.27 800 -0.33 to 0.68 500 -
0.82 300 -1.0 400 -1.2 500 -
1.5 to 1.8 400 -2.2 to 2.7 300 -3.3 to 3.9 200 -
4.7 150 -
630
0.1 to 0.15 800 -0.18 600 -
0.22 to 0.33 500 -0.39 400 -0.47 300 -
0.56 to 1.0 400 -1.2 to 1.5 300 -
1.8 200 -2.2 to 2.7 200 -
3.3 150 -3.9 to 5.6 100 -
800
0.056 to 0.082 800 -0.1 to 0.12 600 -0.15 to 0.27 500 -0.33 to 0.68 400 -0.82 to 1.0 300 -1.2 to 1.8 200 -
2.2 150 -2.7 to 3.9 100 -
1000
0.033 to 0.039 800 -0.047 to 0.082 600 -0.1 to 0.12 500 -0.15 to 0.18 400 -0.22 to 0.27 300 -0.33 to 0.39 400 -0.47 to 0.68 300 -0.82 to 1.0 200 -
1.2 150 -
Series Voltage (Vdc)
Rated Capacitance (μF)
Bagged (pcs/box) Boxed (pcs)
TACC
4505.6 to 8.2 200 -10 to 12 150 -
15 100 -18 100 -
6303.3 200 -
3.9 to 6.8 150 -8.2 100 -10 100 -
8002.2 to 2.7 200 -3.3 to 3.9 150 -
4.7 100 -5.6 to 6.8 100 -
1000 1.0 200 -1.2 150 -
1.5 to 1.8 100 -2.2 to 2.7 100 -
TACB
250
0.33 to 0.39 800 -0.47 to 0.68 600 -0.82 to 1.2 500 -1.5 to 1.8 400 -2.2 to 2.7 300 -
3.3 400 -3.9 to 6.8 300 -
8.2 200 -10 200 -12 150 -
15 to 22 100 -
315
0.22 to 0.27 800 -0.33 to 0.47 600 -0.56 to 2.2 400 -2.7 to 3.9 300 -4.7 to 5.6 200 -
6.8 200 -8.2 150 -
400
0.1 700 -0.12 to 0.18 600 -0.22 to 0.33 500 -0.39 to 1.2 400 -1.5 to 1.8 300 -
2.2 200 -2.7 200 -
3.3 to 3.9 150 -4.7 to 5.6 100 -
630
0.056 to 0.082 800 -0.1 to 0.12 600 -
0.15 500 -0.18 to 0.27 400 -0.33 to 0.47 300 -0.56 to 0.68 400 -0.82 to 1.0 300 -1.2 to 1.8 200 -
2.2 150 -2.7 to 3.9 100 -
800
0.033 to 0.039 800 -0.047 to 0.068 600 -0.082 to 0.15 400 -0.18 to 0.22 300 -0.27 to 0.33 400 -0.39 to 0.56 300 -0.68 to 1.0 200 -
1.2 150 -
104 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FILM CAPACITORS PACKAGING
Series Voltage (Vdc)
Rated Capacitance (μF)
Bagged (pcs/box) Boxed (pcs)
HACE
630 0.47 to 1.0 - 2001.5 - 150
1250 0.47 to 0.68 - 1501.0 to 1.5 - 100
1600 0.27 to 0.33 - 1502000 0.18 to 0.22 - 150
HACD
630
0.047 to 0.082 600 -0.1 500 -
0.12 to 0.22 400 -0.27 300 -0.33 500 -
0.39 to 0.68 400 -0.82 300 -
1.0 to 1.2 200 -1.5 200 -
1000
0.033 to 0.056 600 -0.068 500 -
0.082 to 0.1 400 -0.12 to 0.47 300 -0.56 to 0.82 200 -
1.0 200 -1.2 150 -
1250
0.018 to 0.039 600 -0.047 to 0.082 400 -0.1 to 0.12 300 -0.15 to 0.18 400 -0.22 to 0.27 300 -0.33 to 0.47 200 -0.56 to 0.68 150 -0.82 to 1.2 100 -
1600
0.0068 to 0.012 600 -0.015 500 -
0.018 to 0.027 400 -0.033 to 0.068 300 -0.082 to 0.15 400 -0.18 to 0.22 200 -
0.27 200 -0.33 150 -
2000
0.0033 to 0.0056 600 -0.0068 500 -
0.008 to 0.015 400 -0.018 to 0.022 300 -0.027 to 0.068 400 -
0.082 300 -0.1 to 0.15 200 -
0.18 150 -0.220 to 0.330 100 -
2500
0.015 to 0.022 300 -0.027 to 0.033 200 -0.039 to 0.056 300 -0.068 to 0.082 200 -
0.1 150 -
3150
0.0068 to 0.01 300 -0.012 to 0.015 200 -0.018 to 0.027 300 -0.033 to 0.039 200 -
0.047 150 -
4000
0.0039 to 0.0056 300 -0.0068 to 0.01 200 -0.012 to 0.015 300 -
0.018 200 -0.022 to 0.027 150 -
Series Voltage (Vdc)
Rated Capacitance (μF)
Bagged (pcs/box) Boxed (pcs)
HACB
630
0.033 to 0.039 800 -0.047 to 0.068 600 -
0.082 500 -0.10 to 0.18 400 -0.22 to 0.27 300 -0.33 to 0.39 400 -0.47 to 0.56 300 -0.68 to 0.82 200 -0.1 to 0.12 150 -
1000
0.018 800 -0.022 to 0.033 600 -0.039 to 0.056 500 -0.068 to 0.1 400 -
0.12 300 -0.15 500 -
0.18 to 0.27 400 -0.33 300 -
0.39 to 0.56 200 -0.68 150 -
0.82 to 1.2 100 -
1250
0.012 to 0.027 600 -0.033 500 -
0.039 to 0.056 400 -0.068 to 0.082 300 -
0.1 to 0.12 400 -0.15 to 0.18 300 -0.22 to 0.33 200 -0.39 to 0.56 150 -0.68 to 0.82 100 -
1.0 100 -
1600
0.0047 to 0.0068 600 -0.0082 to 0.012 500 -
0.015 400 -0.018 to 0.033 300 -
0.039 500 -0.047 to 0.082 400 -
0.1 to 0.12 300 -0.15 to 0.18 200 -0.22 to 0.27 150 -0.33 to 0.47 100 -
2000
0.001 to 0.0039 800 -0.0047 to 0.0056 600 -
0.0068 500 -0.0082 to 0.012 400 -0.015 to 0.022 300 -0.027 to 0.047 400 -
0.056 300 -0.068 to 0.082 200 -
0.1 200 -0.12 to 0.15 150 -0.18 to 0.27 100 -
3150
0.0047 to 0.0068 200 -0.0082 400 -
0.010 to 0.012 300 -0.015 200 -0.018 200 -
0.022 to 0.033 150 -
4000
0.0027 300 -0.0033 to 0.0047 200 -0.0056 to 0.0068 300 -0.0082 to 0.01 200 -0.012 to 0.018 150 -
105 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Product specifications in this catalog are subject to change without notice.Please request and make sure our product specifications before purchase and/or use.
FILM CAPACITORS PRECAUTIONS AND GUIDELINES
In designing device circuits(1)
1 Confirming operating and installation environment,use ca-pacitors within the performance limits prescribed in theircatalog or product specifications.
(2) Do not use capacitors at the environment of which tem-perature drastically changes even though it stays within theprescribed range.
(3) Do not use capacitors at the humid or dewy environment.(4) Select the proper capacitors matching for an application.(5) Do not use the capacitors, which have particularly been
designed for a specific application, into other applications. In particular, do not use the capacitor samples, which are provided for the purpose of appearance or electrical check, for other purpose.
(6) Charge and discharge cycles that are rapidly repeated at more than the prescribed conditions causes capacitors to deteriorate in their characteristics or breakdown.
(7) Unless otherwise prescribed, do not apply the surge or ripple voltage of which peak voltage exceeds the specified full rated voltage.
(8) Where using capacitors at a rated temperature, do not ap-ply voltage more than the derating voltage specified at the temperature.
(9) Where using capacitors into AC or pulsing circuits, do not apply current more than the specified maximum permissible current. For the details, consult us.
(10) A rise in capacitor temperature, which is caused by a ripple current, shall be so set as not to exceed the specified limit at non-circulating air condition. Note that a capacitor chang-es in the temperature rise by the operating temperature as its capacitance changes.
(11) The sum of ambient temperature, including the influence of heat from other components, and the rise of temperature by self-heating must be within the specified upper category.
(12) Do not connect capacitors in series or parallel. Consult us for it.
Installation and assembly board washing(1)
2Do not pull or twist the lead wires of a capacitor by applying the force more than the limits when installing the capaci-tor into the printed circuit board. In particular, the capacitor shall be so installed into the board as not to have a crack in the covering resin of the capacitor. If it cannot be avoided, use capacitors with pre-formed lead wires.
(2) If a large-sized capacitor is installed and/or the device is exposed to a vibration shock, anchor the body of the ca-pacitor to the board by means of a clamp or adhesive that does not effect the capacitor.
(3) Do not touch the exterior cover of a capacitor to the metal part of the device or other components.
(4) For soldering, follow the specified conditions. Because the plastic film of the capacitors is effected by heat, overheating the capacitors during soldering causes tanδto increase.
(5) If the assembly boards are washed for the purposes of re-moving residual flux, follow the specified conditions.①Alcohols, Water soluble solvents.
Catalogs7
Disposal6Burning capacitors may discharge toxic gas. Ask a specialist for the disposal of industrial wastes.
(1) For the capacitors that are stored for more than a year, make sure of their characteristics and lead solder ability before use.
(2) Don't increase an excessive vibration, a shock, pressure, and so on to the capacitors.
(3) Don't add the excessive power to the lead wire.(4) Scratching the dielectric film of a capacitor causes If a ca-
pacitor body is scratched or damaged so deep that the di-electric film is damaged, the dielectric will be destructively damaged.Handle capacitors with care.
Storage and handling5
If a capacitor should fail while under load,follow the below
If smoke, fire or stench should be emitted while the device is operating, turn off or unplug the power supply of the device andthen extinguish a fire.
4
While devices are operating3(1)
(2)
Do not touch a capacitor, while under load, directly with bare hands.Touching the capacitor causes a shock hazard.
(4)
Even under non‒load condition, a capacitor may have charge. Also, the capacitor that has been discharged may be spontaneously recharged by dielectric absorption. Han-dle the capacitor after discharging with a discharge resistor.
(3) Do not short the terminals of a capacitor by applying any conductive object. Do not spillany electric‒conductive liquid such as acid or alkaline solution over the capacitor as Well.Do not use capacitors at the following environment;①Water, chemicals or oil spatters on the capacitors.②Direct sunlight pours down onto the capacitors.③Ozone, ultraviolet rays or radiation is applied to the ca- pacitors.④Corrosive gas is exposed to the capacitors.
② Cleaning Methods Vaporized Cleaning, Dip Cleaning,Ultrasonic Cleaning. When Cleaning, Temperature and Period Shall not Be Exceeded 50℃ and 5 Minutes.
③ After Treatment It is Necessary To Remove Cleaning Sol-vent From P.W.B. By enough Dryness.
106 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FILM CAPACITORS PRECAUTIONS AND GUIDELINES
Response to the Substances of Concern8(1)
According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are "articles without any intended release". Therefore they are not applicable for "Registration" for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society "Study of REACH Regulation in EU about Electrolytic Capacitor" (publicized on 13 March 2008)
(2)
Nippon Chemi-Con aims for developing products that meet laws and regulations concerning substances of concern.(Some products may contain regulated substances for exempted application.)Please contact us for more information about law-compliance status.
107 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
ELECTRONIC EQUIPMENT FILM CAPACITOR
TACESeries●Maximum operating temperature 105℃.●Allowable temperature rise 15K max.●Tab : 4 terminals
◆SPECIFICATIONSItems
Category temperature rangeRated voltage rangeCapacitance toleranceVoltage proof (Terminal - Terminal)Dissipation factor(tanδ)Insulation resistance(Terminal - Terminal)
Endurance
Loading under dampheat
-40 to +105℃250Vdc, 400Vdc, 630Vdc, 1000Vdc
±5% (J)No degradation, at 150% of rated voltage shall be applied for 60 seconds.
Not more than 0.05% : Equal or less than 1μF. Not more than (c×0.015+0.05)% : More than 1μF.
No less than 10000ΩF : More than 0.33μF. Rated voltage (Vdc) 250
100400100
630500
1000500Measurement voltage (Vdc)
No less than 30000MΩ: Equal or less than 0.33μF.
The following specifications shall be satisfied, after 1000hrs with applying rated voltage×125% at 105℃.No serious degradationNo less than 10000MΩ : Equal or less than 0.33μF.No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.Within ±5% of initial value.
AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance changeThe following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃90~95%RH.
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF.
No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.
AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance change Within ±5% of initial value.
◆STANDARD RATINGS WV (Vdc)
WV (Vac)
Cap (μF)
Dimensions (mm) Maximumripple current
(Arms)Part Number
W H PT
400
630
1000
250
◆DIMENSIONS
RoHS2Compliant
Characteristics
151822 6.8 8.21012 0.47 0.68 1.0 1.5 2.2 3.3 4.7 0.47 0.68 1.0 1.5
30.032.831.929.031.630.933.616.519.323.025.525.731.032.424.028.528.330.1
28.631.230.427.630.129.432.015.718.422.024.324.529.530.822.927.127.028.7
14.315.614.211.913.111.813.0 5.9 7.1 8.6 9.2 8.610.610.4 6.9 7.3 7.1 7.3
FTACE251N156JEAES0FTACE251N186JEAES0FTACE251N226JFAFS0FTACE401N685JEAES0FTACE401N825JEAES0FTACE401N106JFAFS0FTACE401N126JFAFS0FTACE631N474JDADS0FTACE631N684JDADS0FTACE631N105JDADS0FTACE631N155JHAHS0FTACE631N226JEAES0FTACE631N335JEAES0FTACE631N475JFAFS0FTACE102N474JHAHS0FTACE102N684JHAHS0FTACE102N105JEAES0FTACE102N155JFAFS0
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
4-1.6×3.2(Oval holes)
The recommended conditions for mounting.MARKING
t=0.5
P
7.5
7max
.
P±1.5 2±0.3
4.5±
0.5
7.5±0.2
22.5 100
150
175
250
29.5 27.5
24.529.5 27.5
24.5 22.5
24.5 22.5
17.5 15.0
24.5 22.5
29.5 27.5
29.5 27.5
19.5 17.5
19.5 17.5
(1)The maximum ripple current : +85℃ max., 100kHz, sine wave(2)WV(Vac) : 50Hz or 60Hz, sine wave
108 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
RoHS2Compliant
FTACD251V824JDLCZ0 TACD2E824JTACD2E105JFTACD251V105JDLCZ0
FTACD251V125JDLCZ0 TACD2E125JTACD2E155JTACD2E185JTACD2E225JTACD2E275JTACD2E335JTACD2E395JTACD2E475JTACD2E565J
TACD2E825JTACD2E106JTACD2E126JTACD2E156JTACD2F334JTACD2F394JTACD2F474JTACD2F564JTACD2F684JTACD2F824JTACD2F105JTACD2F125JTACD2F155JTACD2F185JTACD2F225JTACD2F275JTACD2F335JTACD2F395JTACD2F475JTACD2F565JTACD2F685JTACD2F825JTACD2F106JTACD2F126JTACD2F156JTACD2F186JTACD2F226J
TACD2E685J
FTACD251V155JDLCZ0FTACD251V185JDLCZ0FTACD251V225JDLCZ0FTACD251V275JELHZ0FTACD251V335JELHZ0FTACD251V395JELHZ0FTACD251V475JELHZ0FTACD251V565JFLEZ0FTACD251V685JFLEZ0FTACD251V825JFLEZ0FTACD251V106JFLEZ0FTACD251V126JFLEZ0FTACD251V156JFLEZ0FTACD3B1V334JDLCZ0FTACD3B1V394JDLCZ0FTACD3B1V474JDLCZ0FTACD3B1V564JDLCZ0FTACD3B1V684JDLCZ0FTACD3B1V824JDLCZ0FTACD3B1V105JDLCZ0FTACD3B1V125JHLGZ0FTACD3B1V155JHLGZ0FTACD3B1V185JHLGZ0FTACD3B1V225JELHZ0FTACD3B1V275JELHZ0FTACD3B1V335JELHZ0FTACD3B1V395JELHZ0FTACD3B1V475JELHZ0FTACD3B1V565JFLEZ0FTACD3B1V685JFLEZ0FTACD3B1V825JFLEZ0FTACD3B1V106JFLEZ0FTACD3B1V126JFLEZ0FTACD3B1V156JTLJZ0FTACD3B1V186JTLJZ0FTACD3B1V226JTLJZ0
(1)Capacitance tolerance:Standard(J:±5%),Option(K:±10%)
(3)WV(Vac) : 50Hz or 60Hz, sine wave(2)The maximum ripple current : +85℃ max., 100kHz, sine wave
ELECTRONIC EQUIPMENT FILM CAPACITOR
TACDSeries●Maximum operating temperature 105℃.●Allowable temperature rise 15K max.●Downsizing of TACB series.
◆SPECIFICATIONSItems
Category temperature rangeRated voltage range
Endurance
Voltage proof (Terminal - Terminal)
Capacitance tolerance
Insulation resistance(Terminal - Terminal)
Dissipation factor(tanδ)
Loading under dampheat
-40 to +105℃
±5% (J)250 to 1000Vdc
No degradation, at 150% of rated voltage shall be applied for 60 seconds.
Not more than 0.05% : Equal or less than 1μF. Not more than (c×0.015+0.05)% : More than 1μF.
No less than 10000ΩF : More than 0.33μF. No less than 30000MΩ : Equal or less than 0.33μF.
Rated voltage (Vdc)Measurement voltage (Vdc)The following specifications shall be satisfied, after 1000hrs with applying rated voltage×125% at 105℃.
250100
400100100100
630 800 1000500315500 500 500
AppearanceInsulation resistance (Terminal - Terminal)
Insulation resistance (Terminal - Terminal)
Dissipation factor (tanδ)Capacitance changeThe following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃ 90~95%RH.Appearance
Capacitance changeDissipation factor (tanδ)
No serious degradationNo less than 10000MΩ : Equal or less than 0.33μF.No less than 3000ΩF : More than 0.33μF.
Within ±5% of initial value.No more than initial specification at 1kHz.
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF.
No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.Within ±5% of initial value.
◆STANDARD RATINGS
WV (Vdc)
Cap (μF)
Dimensions (mm)
W H T F φd
Maximumripple current
(Arms)0.821.01.21.51.82.22.73.33.94.75.66.88.21012150.330.390.470.560.68 0.821.01.21.51.82.22.73.33.94.75.66.88.21012151822
10.811.612.513.614.715.914.015.216.417.817.118.720.322.224.126.8 8.6 9.1 9.710.311.0 11.912.812.914.115.214.415.617.118.319.919.321.022.925.127.324.226.328.9
10.311.111.913.014.015.213.414.515.616.916.317.819.321.223.025.5 8.2 8.7 9.2 9.810.511.312.212.313.414.513.714.916.317.519.018.420.021.823.926.023.125.127.5
5.456.006.577.348.048.896.667.368.008.787.878.679.52
315
250
16.2 10.0
17.5
0.8
100
22.5 10.0010.0010.00
1.0
10.0
12.50.8
12517.5
22.5
1.0
37.5
23.2
28.2
16.2
18.2
23.2
28.2
43.2
3.78 4.114.514.935.435.876.496.236.967.636.497.197.958.659.348.519.38
10.0010.0010.00
10.009.33
10.00
WV (Vac)
Part Number Previous Part Number (Just for your reference)
Characteristics
109 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
TACDSeries
ELECTRONIC EQUIPMENT FILM CAPACITOR
◆STANDARD RATINGS
WV (Vdc)
Cap (μF)
Dimensions (mm)
W H FT φφd
400
500
630
0.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.20.220.27 0.330.390.470.560.680.821.01.21.51.82.22.73.33.94.70.10.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.6
8.7 9.310.010.611.412.213.113.214.313.414.715.917.419.018.620.021.823.625.828.1 9.610.2 11.111.712.713.614.715.914.916.117.619.120.920.422.324.126.3 9.1 9.610.411.212.013.113.114.015.214.015.216.518.019.519.120.822.725.027.423.925.928.1
8.3 8.9 9.510.110.811.612.512.613.712.814.115.216.518.117.719.120.722.524.526.8 9.2 9.8 10.611.212.113.014.015.214.215.316.818.219.919.421.323.025.1 8.7 9.210.010.711.512.512.513.414.513.414.515.717.118.618.219.821.723.826.122.824.726.8
3.91 4.33 4.27 4.64 5.09 5.56 6.13 5.89 6.50 5.71 6.13 6.71 7.43 8.23 7.47 8.13 8.92 9.7410.0010.00 3.09 3.42 3.78 4.11 4.51 4.93 5.43 5.96 5.08 5.57 6.23 6.82 7.54 6.85 7.57 8.23 9.04 2.99 3.28 3.66 4.02 4.44 4.92 4.76 5.17 5.68 4.79 5.27 5.79 6.39 7.00 6.42 7.04 7.79 8.62 9.54 6.93 7.61 8.31
16.2 10.0
12.5
17.5
22.5
12.5
17.5
22.5
10.0
12.5
17.5
22.5
37.5
1.0
18.2
23.2
28.2
18.2
23.2
28.2
16.2
18.2
23.2
28.2
43.2
0.8
1.0
0.8
1.0
0.8
Maximumripple current
(Arms) WV (Vac)
Part Number
150
150
175
FTACD401V224JDLCZ0FTACD401V274JDLCZ0FTACD401V334JDLCZ0FTACD401V394JDLCZ0
FTACD401V564JDLCZ0FTACD401V684JDLCZ0FTACD401V824JHLGZ0FTACD401V105JHLGZ0FTACD401V125JELHZ0FTACD401V155JELHZ0FTACD401V185JELHZ0FTACD401V225JELHZ0FTACD401V275JELHZ0FTACD401V335JFLEZ0FTACD401V395JFLEZ0FTACD401V475JFLEZ0FTACD401V565JFLEZ0FTACD401V685JFLEZ0
FTACD501V224JHLGZ0FTACD501V274JHLGZ0FTACD501V334JHLGZ0FTACD501V394JHLGZ0FTACD501V474JHLGZ0FTACD501V564JHLGZ0FTACD501V684JHLGZ0FTACD501V824JHLGZ0FTACD501V105JELHZ0FTACD501V125JELHZ0FTACD501V155JELHZ0FTACD501V185JELHZ0FTACD501V225JELHZ0FTACD501V275JFLEZ0FTACD501V335JFLEZ0FTACD501V395JFLEZ0FTACD501V475JFLEZ0FTACD631V104JDLCZ0FTACD631V124JDLCZ0FTACD631V154JDLCZ0FTACD631V184JDLCZ0FTACD631V224JDLCZ0FTACD631V274JDLCZ0FTACD631V334JHLGZ0FTACD631V394JHLGZ0FTACD631V474JHLGZ0FTACD631V564JELHZ0FTACD631V684JELHZ0
FTACD631V105JELHZ0FTACD631V125JELHZ0FTACD631V155JFLEZ0FTACD631V185JFLEZ0FTACD631V225JFLEZ0FTACD631V275JFLEZ0FTACD631V335JFLEZ0FTACD631V395JTLJZ0FTACD631V475JTLJZ0FTACD631V565JTLJZ0
FTACD631V824JELHZ0
FTACD401V825JFLEZ0
FTACD401V474JDLCZ0
TACD2G224JTACD2G274JTACD2G334JTACD2G394JTACD2G474JTACD2G564JTACD2G684JTACD2G824JTACD2G105JTACD2G125JTACD2G155JTACD2G185JTACD2G225JTACD2G275JTACD2G335JTACD2G395JTACD2G475JTACD2G565JTACD2G685JTACD2G825JTACD2H224JTACD2H274JTACD2H334JTACD2H394JTACD2H474JTACD2H564JTACD2H684J
TACD2H125JTACD2H155JTACD2H185JTACD2H225JTACD2H275JTACD2H335JTACD2H395JTACD2H475JTACD2J104JTACD2J124JTACD2J154JTACD2J184JTACD2J224JTACD2J274JTACD2J334JTACD2J394J
TACD2J564JTACD2J684JTACD2J824JTACD2J105JTACD2J125J
TACD2J185JTACD2J225JTACD2J275JTACD2J335JTACD2J395JTACD2J475JTACD2J565J
TACD2J155J
TACD2J474J
TACD2H105J
(1)Capacitance tolerance:Standard(J:±5%),Option(K:±10%)
(3)WV(Vac) : 50Hz or 60Hz, sine wave(2)The maximum ripple current : +85℃ max., 100kHz, sine wave
Previous Part Number(Just for your reference)
TACD2H824J
110 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
TACDSeries
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV (Vdc)
Cap (μF)
Dimensions (mm)
W H FT
800
(1)Capacitance tolerance:Standard(J:±5%),Option(K:±10%)
(3)WV(Vac) : 50Hz or 60Hz, sine wave(2)The maximum ripple current : +85℃ max., 100kHz, sine wave
1000
0.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.90.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.2
8.5 9.0 9.610.311.012.012.413.414.613.514.415.616.818.319.919.220.823.025.127.523.826.028.0 8.9 9.410.010.711.512.412.313.214.513.314.415.817.218.520.119.220.922.824.927.1
8.1 8.6 9.2 9.810.511.411.812.813.912.913.814.916.017.519.018.319.922.023.926.222.724.826.7 8.5 9.0 9.610.211.011.811.712.613.812.713.815.016.417.619.118.319.921.723.725.8
2.602.863.143.343.664.093.924.334.804.094.464.885.345.876.465.856.417.177.858.686.447.127.732.282.482.722.973.283.603.483.814.263.603.974.404.865.295.815.215.746.306.967.62
16.2
18.2
28.2
43.2
16.2
18.2
23.2
28.2 22.5
17.5
12.5
10.0
37.5
22.5
17.5
12.5
23.2
10.0
0.8
200
1.0
1.0
0.8
Maximumripple current
(Arms) WV (Vac)
Part Number
250
MARKING
F±1.0
15m
in.
6 m
ax.
φφd±0.05
FTACD801V563JDLCZ0FTACD801V683JDLCZ0FTACD801V823JDLCZ0FTACD801V104JDLCZ0FTACD801V124JDLCZ0FTACD801V154JDLCZ0FTACD801V184JHLGZ0FTACD801V224JHLGZ0FTACD801V274JHLGZ0FTACD801V334JELHZ0FTACD801V394JELHZ0FTACD801V474JELHZ0FTACD801V564JELHZ0FTACD801V684JELHZ0FTACD801V824JELHZ0FTACD801V105JFLEZ0FTACD801V125JFLEZ0FTACD801V155JFLEZ0FTACD801V185JFLEZ0FTACD801V225JFLEZ0FTACD801V275JTLJZ0FTACD801V335JTLJZ0FTACD801V395JTLJZ0FTACD102V333JDLCZ0FTACD102V393JDLCZ0FTACD102V473JDLCZ0FTACD102V563JDLCZ0FTACD102V683JDLCZ0FTACD102V823JDLCZ0FTACD102V104JHLGZ0FTACD102V124JHLGZ0FTACD102V154JHLGZ0FTACD102V184JELHZ0FTACD102V224JELHZ0FTACD102V274JELHZ0FTACD102V334JELHZ0FTACD102V394JELHZ0FTACD102V474JELHZ0FTACD102V564JFLEZ0FTACD102V684JFLEZ0FTACD102V824JFLEZ0FTACD102V105JFLEZ0FTACD102V125JFLEZ0
TACD2K563JTACD2K683JTACD2K823JTACD2K104JTACD2K124JTACD2K154JTACD2K184JTACD2K224JTACD2K274JTACD2K334JTACD2K394JTACD2K474JTACD2K564JTACD2K684JTACD2K824JTACD2K105JTACD2K125JTACD2K155JTACD2K185JTACD2K225JTACD2K275JTACD2K335JTACD2K395JTACD3A333JTACD3A393JTACD3A473JTACD3A563JTACD3A683JTACD3A823JTACD3A104JTACD3A124JTACD3A154JTACD3A184JTACD3A224JTACD3A274JTACD3A334JTACD3A394JTACD3A474JTACD3A564JTACD3A684JTACD3A824JTACD3A105JTACD3A125J
◆STANDARD RATINGS
◆DIMENSIONS (mm)
Previous Part Number(Just for your reference)φφd
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
111 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FTACC451V565JRLFZ0FTACC451V685JRLFZ0FTACC451V825JRLFZ0FTACC451V106JRLFZ0FTACC451V126JTLJZ0FTACC451V156JTLJZ0FTACC451V186JULWZ0FTACC631V335JRLFZ0FTACC631V395JRLFZ0FTACC631V475JRLFZ0FTACC631V565JRLFZ0FTACC631V685JTLJZ0FTACC631V825JTLJZ0FTACC631V106JULWZ0FTACC801V225JRLFZ0FTACC801V275JRLFZ0FTACC801V335JRLFZ0FTACC801V395JRLFZ0FTACC801V475JTLJZ0FTACC801V565JULWZ0FTACC801V685JULWZ0FTACC102V105JRLFZ0FTACC102V125JRLFZ0FTACC102V155JRLFZ0FTACC102V185JTLJZ0FTACC102V225JULWZ0FTACC102V275JULWZ0
TACC2W565JTACC2W685JTACC2W825JTACC2W106JTACC2W126JTACC2W156JTACC2W186JTACC2J335JTACC2J395JTACC2J475JTACC2J565JTACC2J685JTACC2J825JTACC2J106JTACC2K225JTACC2K275JTACC2K335JTACC2K395JTACC2K475JTACC2K565JTACC2K685JTACC3A105JTACC3A125JTACC3A155JTACC3A185JTACC3A225JTACC3A275J
(2)The maximum ripple current : +85℃ max., 100kHz, sine wave
RoHS2Compliant
ELECTRONIC EQUIPMENT FILM CAPACITOR
●Maximum operating temperature 105℃.TACCSeries
●Allowable temperature rise 15K max.●Large capacitance of TACB series.
◆SPECIFICATIONSItems Characteristics
Category temperature rangeRated voltage rangeCapacitance toleranceVoltage proof (Terminal - Terminal)Dissipation factor(tanδ)Insulation resistance(Terminal - Terminal)
Endurance
Loading under dampheat
-40 to +105℃
±5% (J)450 to 1000Vdc
No degradation, at 150% of rated voltage shall be applied for 60 seconds.
No more than 0.05% : Equal or less than 1μF.No more than (c×0.015+0.05)% : More than 1μF.
No less than 10000ΩF : More than 0.33μF. No less than 30000MΩ: Equal or less than 0.33μF.
Rated voltage (Vdc)Measurement voltage (Vdc)
450100
630500
800500
1000500
The following specifications shall be satisfied, after 1000hrs with applying rated voltage×125% at 85℃.AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance changeThe following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃ 90~95%RH.
No serious degradationNo less than 10000MΩ: Equal or less than 0.33μF.No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.Within ±5% of initial value.
AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance change
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF.
No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.Within ±5% of initial value.
◆STANDARD RATINGS WV (Vdc)
Cap(μF)
Dimensions (mm)
W H F φdT
Maximumripple current
(Arms) WV (Vac)
Part Number Previous Part Number(Just for your reference)
450
630
800
1000
5.6 6.8 8.2 10 12 1518 3.3 3.94.7 5.6 6.8 8.2 10 2.2 2.7 3.33.94.75.66.81.01.2 1.5 1.8 2.22.7
21.0 22.9 25.0 27.4 25.7 28.5 27.4 21.5 23.2 25.2 27.4 25.8 28.0 27.3 21.9 24.0 26.3 28.5 26.8 25.7 28.0 23.4 25.5 28.2 26.4 25.8 28.2
20.0 21.9 23.8 26.1 24.5 27.1 26.1 20.4 22.1 24.0 26.1 24.6 26.7 26.0 20.8 22.9 25.1 27.1 25.5 24.5 26.7 22.3 24.3 26.9 25.2 24.6 26.9
7.0 7.7 8.5 9.4 7.5 8.4 7.3 5.6 6.1 6.7 7.3 5.9 6.5 5.6 4.5 5.0 5.6 6.0 4.9 4.2 4.6 3.9 4.2 4.7 3.8 3.3 3.7
33.2
43.2
53.2
33.2
43.2
53.2
33.2
43.2 53.2
33.2
43.2
53.2
27.5
37.5
47.5
27.5
37.5 47.5
27.5
37.5 47.5
27.5
37.5
47.5
1.0
1.0
1.0
1.0
115
150
175
200
(1)Capacitance tolerance : Standard (J:±5%) , Option (K:±10%)
(3)WV(Vac) : 50Hz or 60Hz, sine wave
◆DIMENSIONS (mm)
7 m
ax.
F±1.0φ φd±0.05
MARKING
15 m
in.
+3.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
112 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FTACB251V334JDLCZ0FTACB251V394JDLCZ0FTACB251V474JDLCZ0FTACB251V564JDLCZ0FTACB251V684JDLCZ0FTACB251V824JDLCZ0FTACB251V105JDLCZ0FTACB251V125JHLGZ0FTACB251V155JHLGZ0FTACB251V185JHLGZ0FTACB251V225JELHZ0FTACB251V275JELHZ0FTACB251V335JELHZ0FTACB251V395JELHZ0FTACB251V475JELHZ0FTACB251V565JFLEZ0FTACB251V685JFLEZ0FTACB251V825JFLEZ0FTACB251V106JFLEZ0FTACB251V126JFLEZ0FTACB251V156JTLJZ0FTACB251V186JTLJZ0FTACB251V226JTLJZ0FTACB3B1V224JDLCZ0FTACB3B1V274JDLCZ0FTACB3B1V334JDLCZ0FTACB3B1V394JDLCZ0FTACB3B1V474JDLCZ0FTACB3B1V564JDLCZ0FTACB3B1V684JDLCZ0FTACB3B1V824JHLGZ0FTACB3B1V105JHLGZ0
TACB2E334JTACB2E394JTACB2E474JTACB2E564JTACB2E684JTACB2E824JTACB2E105JTACB2E125JTACB2E155JTACB2E185JTACB2E225JTACB2E275JTACB2E335JTACB2E395JTACB2E475JTACB2E565JTACB2E685JTACB2E825JTACB2E106JTACB2E126JTACB2E156JTACB2E186JTACB2E226JTACB2F224JTACB2F274JTACB2F334JTACB2F394JTACB2F474JTACB2F564JTACB2F684JTACB2F824JTACB2F105J
RoHS2Compliant
ELECTRONIC EQUIPMENT FILM CAPACITOR
●Maximum operating temperature 105℃.TACBSeries
●Allowable temperature rise 15K max.●A little hum is produced when applied AC voltage.
◆SPECIFICATIONSItems Characteristics
Category temperature rangeRated voltage rangeCapacitance toleranceVoltage proof (Terminal - Terminal)Dissipation factor(tanδ)Insulation resistance(Terminal - Terminal)
Endurance
Loading under dampheat
-40 to +105℃
±5% (J)250 to 800Vdc
No degradation, at 150% of rated voltage shall be applied for 60 seconds.
No more than 0.05% : Equal or less than 1μF.No more than (c×0.015+0.05)% : More than 1μF.
No less than 10000ΩF : More than 0.33μF. No less than 30000MΩ: Equal or less than 0.33μF.
Rated voltage (Vdc)Measurement voltage (Vdc)
250100
315100
400100
630500
800500
The following specifications shall be satisfied, after 1000hrs with applying rated voltage×125% at 105℃.AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance change
No serious degradationNo less than 10000MΩ: Equal or less than 0.33μF.No less than 3000ΩF : More than 0.33μF.No more than initial specification at 1kHz.Within ±5% of initial value.
The following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃ 90~95%RH.AppearanceInsulation resistance (Terminal - Terminal)Dissipation factor (tanδ)Capacitance change
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF.
No less than 3000ΩF : More than 0.3μF.No more than initial specification at 1kHz.Within ±5% of initial value.
◆STANDARD RATINGS
WV (Vdc)
Cap(μF)
Dimensions (mm)
W H F φdT
Maximumripple current
(Arms) WV (Vac)
Part Number Previous Part Number(Just for your reference)
0.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.66.88.210121518220.220.270.330.390.470.560.680.821.0
8.69.29.7
10.311.111.912.912.914.115.214.515.717.118.420.019.321.022.125.227.324.226.328.9
8.79.3
10.010.711.412.113.213.214.4
8.38.89.39.8
10.611.412.312.313.514.513.815.016.317.519.018.420.021.924.026.023.125.127.5
8.39.09.6
10.210.911.612.612.613.7
3.083.343.674.014.424.855.355.035.636.175.045.586.176.717.366.387.037.728.529.346.457.077.812.813.113.443.744.104.484.944.655.14
250
315
16.2 10.0
0.8
125
150
1.0
0.8
12.5
17.5
22.5
37.5
10.0
12.5
18.2
23.2
28.2
43.2
16.2
18.2
(2)The maximum ripple current : +85℃ max., 100kHz, sine wave(1)Capacitance tolerance : Standard (J:±5%) , Option (K:±10%)
(3)WV(Vac) : 50Hz or 60Hz, sine wave
113 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
FTACB3B1V125JELHZ0FTACB3B1V155JELHZ0FTACB3B1V185JELHZ0FTACB3B1V225JELHZ0FTACB3B1V275JELHZ0FTACB3B1V335JFLEZ0FTACB3B1V395JFLEZ0FTACB3B1V475JFLEZ0FTACB3B1V565JFLEZ0FTACB3B1V685JFLEZ0FTACB3B1V825JFLEZ0FTACB401V104JDLCZ0FTACB401V124JDLCZ0FTACB401V154JDLCZ0FTACB401V184JDLCZ0FTACB401V224JDLCZ0FTACB401V274JDLCZ0FTACB401V334JHLGZ0FTACB401V394JHLGZ0FTACB401V474JHLGZ0FTACB401V564JELHZ0FTACB401V684JELHZ0FTACB401V824JELHZ0FTACB401V105JELHZ0FTACB401V125JELHZ0FTACB401V155JFLEZ0FTACB401V185JFLEZ0FTACB401V225JFLEZ0FTACB401V275JFLEZ0FTACB401V335JFLEZ0FTACB401V395JTLJZ0FTACB401V475JTLJZ0FTACB401V565JTLJZ0FTACB631V563JDLCZ0FTACB631V683JDLCZ0FTACB631V823JDLCZ0FTACB631V104JDLCZ0FTACB631V124JDLCZ0FTACB631V154JDLCZ0FTACB631V184JHLGZ0FTACB631V224JHLGZ0FTACB631V274JHLGZ0FTACB631V334JELHZ0FTACB631V394JELHZ0FTACB631V474JELHZ0FTACB631V564JELHZ0FTACB631V684JELHZ0FTACB631V824JELHZ0FTACB631V105JFLEZ0FTACB631V125JFLEZ0FTACB631V155JFLEZ0FTACB631V185JFLEZ0FTACB631V225JFLEZ0FTACB631V275JTLJZ0FTACB631V335JTLJZ0FTACB631V395JTLJZ0
TACB2F125JTACB2F155JTACB2F185JTACB2F225JTACB2F275JTACB2F335JTACB2F395JTACB2F475JTACB2F565JTACB2F685JTACB2F825JTACB2G104JTACB2G124JTACB2G154JTACB2G184JTACB2G224JTACB2G274JTACB2G334JTACB2G394JTACB2G474JTACB2G564JTACB2G684JTACB2G824JTACB2G105JTACB2G125JTACB2G155JTACB2G185JTACB2G225JTACB2G275JTACB2G335JTACB2G395JTACB2G475JTACB2G565JTACB2J563JTACB2J683JTACB2J823JTACB2J104JTACB2J124JTACB2J154JTACB2J184JTACB2J224JTACB2J274JTACB2J334JTACB2J394JTACB2J474JTACB2J564JTACB2J684JTACB2J824JTACB2J105JTACB2J125JTACB2J155JTACB2J185JTACB2J225JTACB2J275JTACB2J335JTACB2J395J
ELECTRONIC EQUIPMENT FILM CAPACITOR
TACBSeries
◆STANDARD RATINGS
WV (Vdc)
Cap (μF)
Dimensions (mm)
W H T F φd
Maximumripple current
(Arms) WV (Vac)
Part Number
1.21.51.82.22.73.33.94.75.66.88.20.10.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.94.75.60.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.21.51.82.22.73.33.9
0.817.5
22.5
315
400
630
13.414.815.917.319.018.620.021.823.625.828.1 9.2 9.710.511.212.113.113.214.115.214.115.316.618.119.619.220.822.825.127.523.925.928.1 8.5 9.1 9.610.311.011.912.313.414.613.514.515.616.818.319.919.220.823.025.127.523.826.028.0
12.814.115.216.518.117.719.020.722.524.626.8 8.8 9.310.110.711.612.512.613.514.513.514.615.817.218.618.319.821.823.926.222.824.726.8 8.2 8.7 9.2 9.810.511.411.812.813.912.913.814.916.017.418.918.319.822.023.926.222.724.826.7
4.164.655.095.636.245.475.956.537.137.868.63
10.0
0.812.5
17.5
22.5
37.5
10.0
12.5
17.5
22.5
37.5
23.2
28.2
16.2
18.2
23.2
28.2
43.2
16.2
18.2
23.2
28.2
43.2
1.0
1.0
0.8
1.0
1.962.162.382.622.883.213.103.423.793.043.303.633.964.364.794.164.555.095.586.174.174.615.01
2.402.622.933.213.553.943.714.044.433.543.904.294.735.194.585.025.556.156.794.575.025.48
150
175
200
(1)Capacitance tolerance : Standard (J: ± 5%) , Option (K:± 10%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
Previous Part Number(Just for your reference)
114 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
0.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.2
9.09.5
10.110.811.512.512.313.314.613.414.515.817.218.520.119.220.922.825.027.2
8.69.19.7
10.311.011.911.812.713.912.813.815.116.417.619.118.319.921.823.825.9
1.81 1.97 2.16 2.36 2.60 2.85 2.67 2.92 3.26 2.59 2.87 3.17 3.51 3.82 4.19 3.59 3.96 4.35 4.80 5.26
FTACB801V333JDLCZ0FTACB801V393JDLCZ0FTACB801V473JDLCZ0FTACB801V563JDLCZ0FTACB801V683JDLCZ0FTACB801V823JDLCZ0FTACB801V104JHLGZ0FTACB801V124JHLGZ0FTACB801V154JHLGZ0FTACB801V184JELHZ0FTACB801V224JELHZ0FTACB801V274JELHZ0FTACB801V334JELHZ0FTACB801V394JELHZ0FTACB801V474JELHZ0FTACB801V564JFLEZ0FTACB801V684JFLEZ0FTACB801V824JFLEZ0FTACB801V105JFLEZ0FTACB801V125JFLEZ0
TACB2K333JTACB2K393JTACB2K473JTACB2K563JTACB2K683JTACB2K823JTACB2K104JTACB2K124JTACB2K154JTACB2K184JTACB2K224JTACB2K274JTACB2K334JTACB2K394JTACB2K474JTACB2K564JTACB2K684JTACB2K824JTACB2K105JTACB2K125J
(1)Capacitance tolerance:Standard(J:±5%),Option(K:±10%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
800
φd±0.05
16.2
18.2
23.2
28.2
10.0
12.5
17.5
0.8
250
1.022.5
15m
in.
6 m
ax.
MARKING
F±1.0
◆DIMENSIONS (mm)
◆STANDARD RATINGS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd
TACBSeries
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
115 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
RoHS2Compliant
◆SPECIFICATIONS
ELECTRONIC EQUIPMENT FILM CAPACITOR
●Maximum operating temperature 105℃ . ●A little hum is produced when applied AC voltage.●Tab : 4 terminals
ItemsCategory temperature rangeRated voltage range Capacitance toleranceVoltage proof(Terminal - Terminal) Dissipation factor (tanδ)Insulation resistance (Terminal - Terminal)
Endurance
Loading under dampheat
Characteristics
HACESeries
-40 to +105℃630Vdc, 1250Vdc, 1600Vdc, 2000Vdc
630500
12501000 1000
2000
±5%(J) No degradation, at 150% of rated voltage shall be applied for 60 seconds.
No more than 0.05% : Equal or less than 1μF.No more than (cх0.015+0.05)% : More than 1μF. No less than 30000MΩ : Equal or less than 0.33μF.No less than 10000ΩF : More than 0.33μF.
The following specifications shall be satisfied, after 1000hrs with applying rated voltageх125% at 105℃ .
Rated voltage (Vdc)
Appearance
Dissipation factor (tanδ)Capacitance change
Appearance
Dissipation factor (tanδ)Capacitance change
Insulation resistance(Terminal - Terminal)
The following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃90~95%RH.
No serious degradation
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
Insulation resistance (Terminal - Terminal)
Measurement voltage (Vdc)
0.470.681.01.50.470.681.01.50.270.330.180.22
26.125.329.831.529.134.530.832.530.233.230.833.8
24.924.128.330.027.732.829.331.028.831.629.332.2
10.511.113.513.510.112.012.013.59.6
10.68.89.7
FHACE631N474J0A0S0FHACE631N684J1A1S0FHACE631N105J1A1S0FHACE631N155J2A2S0FHACE1C2N474J2A2S0FHACE1C2N684J2A2S0FHACE1C2N105J4A4S0FHACE1C2N155J5A5S0FHACE162N274J2A2S0FHACE162N334J2A2S0FHACE202N184J2A2S0FHACE202N224J2A2S0
4-1.6×3.2(Oval holes)
The recommended conditions for mounting.MARKING
t=0.5
P
7.5
7max
.
P±1.5 2±0.3
4.5±
0.5
7.5±0.2
18.5
23.528.5
28.5
28.5
28.5
43.553.5
16.5
21.5
26.5
26.5
26.5
26.5
41.551.5
300
400
450
450
1250
1600
2000
◆STANDARD RATINGS
◆DIMENSIONS
WV(Vdc)
630
WV(Vac)
Cap(μF)
Dimensions (mm) Maximumripple current
(Arms)Part Number
W H PT
(1)The maximum ripple current : +85℃ max, 100KHz, sine wave(2)WV(Vac) : 50Hz or 60Hz, sine wave
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
116 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
RoHS2Compliant
◆SPECIFICATIONS
ELECTRONIC EQUIPMENT FILM CAPACITOR
●Maximum operating temperature 105℃ . ●Allowable temperature rise 15K max. ●Downsizing of HACB series.
ItemsCategory temperature rangeRated voltage range Capacitance toleranceVoltage proof(Terminal - Terminal) Dissipation factor (tanδ)Insulation resistance (Terminal - Terminal)
Endurance
Loading under dampheat
Characteristics
HACDSeries
-40 to +105℃630 to 4000Vdc
630500
10001000 1000 1000
1600 20001000 1000 1000
31501000400025001250
±5%(J) No degradation, at 150% of rated voltage shall be applied for 60 seconds.
No more than 0.05% : Equal or less than 1μF.No more than (cх0.015+0.05)% : More than 1μF. No less than 30000MΩ : Equal or less than 0.33μF.No less than 10000ΩF : More than 0.33μF.
The following specifications shall be satisfied, after 1000hrs with applying rated voltage×125% at 105℃ .
Rated voltage (Vdc)
Appearance
Dissipation factor (tanδ)Capacitance change
Appearance
Dissipation factor (tanδ)Capacitance change
Insulation resistance(Terminal - Terminal)
The following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃90~95%RH.
No serious degradation
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
Insulation resistance (Terminal - Terminal)
Measurement voltage (Vdc)
◆STANDARD RATINGS
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd0.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.21.50.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.39
9.810.411.011.612.313.114.115.113.814.916.117.118.519.919.020.522.324.226.710.010.411.011.512.213.013.914.913.714.715.817.118.619.9
9.310.010.511.111.712.513.514.413.214.215.316.317.618.918.119.621.323.025.49.6
10.010.511.011.712.413.314.213.114.015.116.317.719.0
2.65 2.89 3.19 3.50 3.86 4.23 4.73 5.18 4.31 4.78 5.28 5.74 6.30 6.88 6.19 6.79 7.50 8.22 9.19 2.43 2.64 2.90 3.17 3.49 3.83 4.23 4.64 3.90 4.27 4.72 5.23 5.79 6.29
FHACD631V473J0LGZ0 FHACD631V563J0LGZ0 FHACD631V683J0LGZ0 FHACD631V823J0LGZ0 FHACD631V104J0LGZ0 FHACD631V124J0LGZ0 FHACD631V154J0LGZ0 FHACD631V184J0LGZ0 FHACD631V224J1LHZ0 FHACD631V274J1LHZ0 FHACD631V334J1LHZ0 FHACD631V394J1LHZ0 FHACD631V474J1LHZ0 FHACD631V564J1LHZ0 FHACD631V684J2LEZ0 FHACD631V824J2LEZ0 FHACD631V105J2LEZ0 FHACD631V125J2LEZ0 FHACD631V155J2LEZ0 FHACD102V333J0LGZ0 FHACD102V393J0LGZ0 FHACD102V473J0LGZ0 FHACD102V563J0LGZ0 FHACD102V683J0LGZ0 FHACD102V823J0LGZ0 FHACD102V104J0LGZ0 FHACD102V124J0LGZ0 FHACD102V154J1LHZ0 FHACD102V184J1LHZ0 FHACD102V224J1LHZ0 FHACD102V274J1LHZ0 FHACD102V334J1LHZ0 FHACD102V394J1LHZ0
HACD2J473J HACD2J563J HACD2J683J HACD2J823J HACD2J104J HACD2J124J HACD2J154J HACD2J184J HACD2J224J HACD2J274J HACD2J334J HACD2J394J HACD2J474J HACD2J564J HACD2J684J HACD2J824J HACD2J105J HACD2J125J HACD2J155J HACD3A333J HACD3A393J HACD3A473J HACD3A563J HACD3A683J HACD3A823J HACD3A104J HACD3A124J HACD3A154J HACD3A184J HACD3A224J HACD3A274J HACD3A334J HACD3A394J
(1)The maximum ripple current : +85℃max., 100kHz, sine wave(2)WV(Vac) : 50Hz or 60Hz, sine wave
630
1000
22.7
27.7
17.7
17.7
22.7
22.5
0.8
0.8
250
270
1.0
12.5
17.5
12.5
17.5
117 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
◆STANDARD RATINGS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd0.470.560.680.821.01.20.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.20.00680.00820.010.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.00330.00390.00470.00560.00680.00820.010.0120.0150.018
18.920.422.124.026.228.59.7
10.411.011.612.313.013.814.813.314.315.316.717.919.518.520.121.623.425.327.623.225.427.510.010.611.211.812.613.414.415.016.313.013.814.715.817.018.417.218.920.422.224.226.59.39.7
10.210.911.812.613.514.415.616.7
18.019.421.122.925.027.19.39.9
10.511.111.712.413.214.212.713.614.615.917.118.617.719.220.622.324.126.322.124.226.29.5
10.110.611.212.012.813.714.315.512.413.214.015.116.217.616.418.019.421.123.125.38.99.29.7
10.411.212.012.913.714.916.0
5.636.156.787.448.229.002.042.252.502.763.003.293.603.963.243.573.914.384.795.304.775.285.746.306.877.585.556.136.721.491.802.092.292.562.803.103.433.802.602.853.113.433.774.163.684.124.514.995.536.110.730.851.031.231.501.802.202.632.973.26
FHACD102V474J2LEZ0FHACD102V564J2LEZ0FHACD102V684J2LEZ0FHACD102V824J2LEZ0FHACD102V105J2LEZ0FHACD102V125J2LEZ0FHACD1C2V183J0LGZ0FHACD1C2V223J0LGZ0FHACD1C2V273J0LGZ0FHACD1C2V333J0LGZ0FHACD1C2V393J0LGZ0FHACD1C2V473J0LGZ0FHACD1C2V563J0LGZ0FHACD1C2V683J0LGZ0FHACD1C2V823J1LHZ0FHACD1C2V104J1LHZ0FHACD1C2V124J1LHZ0FHACD1C2V154J1LHZ0FHACD1C2V184J1LHZ0FHACD1C2V224J1LHZ0FHACD1C2V274J2LEZ0FHACD1C2V334J2LEZ0FHACD1C2V394J2LEZ0FHACD1C2V474J2LEZ0FHACD1C2V564J2LEZ0FHACD1C2V684J2LEZ0FHACD1C2V824JTLJZ0FHACD1C2V105JTLJZ0FHACD1C2V125JTLJZ0FHACD162V682JKLDZ0FHACD162V822JKLDZ0FHACD162V103JKLDZ0FHACD162V123JKLDZ0FHACD162V153JKLDZ0FHACD162V183JKLDZ0FHACD162V223JKLDZ0FHACD162V273JKLDZ0FHACD162V333JKLDZ0FHACD162V393J1LHZ0FHACD162V473J1LHZ0FHACD162V563J1LHZ0FHACD162V683J1LHZ0FHACD162V823J1LHZ0FHACD162V104J1LHZ0FHACD162V124J2LEZ0FHACD162V154J2LEZ0FHACD162V184J2LEZ0FHACD162V224J2LEZ0FHACD162V274J2LEZ0FHACD162V334J2LEZ0FHACD202V332JKLDZ0FHACD202V392JKLDZ0FHACD202V472JKLDZ0FHACD202V562JKLDZ0FHACD202V682JKLDZ0FHACD202V822JKLDZ0FHACD202V103JKLDZ0FHACD202V123JKLDZ0FHACD202V153JKLDZ0FHACD202V183JKLDZ0
HACD3A474JHACD3A564JHACD3A684JHACD3A824JHACD3A105JHACD3A125JHACD3B183JHACD3B223JHACD3B273JHACD3B333JHACD3B393JHACD3B473JHACD3B563JHACD3B683JHACD3B823JHACD3B104JHACD3B124JHACD3B154JHACD3B184JHACD3B224JHACD3B274JHACD3B334JHACD3B394JHACD3B474JHACD3B564JHACD3B684JHACD3B824JHACD3B105JHACD3B125JHACD3C682JHACD3C822JHACD3C103JHACD3C123JHACD3C153JHACD3C183JHACD3C223JHACD3C273JHACD3C333JHACD3C393JHACD3C473JHACD3C563JHACD3C683JHACD3C823JHACD3C104JHACD3C124JHACD3C154JHACD3C184JHACD3C224JHACD3C274JHACD3C334JHACD3D332JHACD3D392JHACD3D472JHACD3D562JHACD3D682JHACD3D822JHACD3D103JHACD3D123JHACD3D153JHACD3D183J
(1)The maximum ripple current : +85℃max., 100kHz, sine wave(2)WV(Vac) : 50Hz or 60Hz, sine wave
1000
1250
2000
27.7
27.7
17.7
22.7
42.7
19.7
19.7
22.7
27.7
22.5
22.5
12.5
17.5
37.5
15.0
15.0
17.5
22.5
1.0
0.8
1.0
0.8
0.8
270
300
350
350
1.0
HACDSeries
1600
118 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
◆STANDARD RATINGS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd0.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.00680.00820.010.0120.0150.0180.0220.0270.0330.0390.0470.00390.00470.00560.00680.00820.010.0120.0150.0180.0220.027
13.114.015.116.117.318.617.518.820.522.124.426.422.624.727.011.712.613.714.916.217.418.920.422.324.326.611.512.413.414.415.817.118.720.522.424.226.411.212.012.813.915.016.317.719.521.223.225.5
11.011.812.813.715.116.317.819.521.423.125.110.611.412.213.214.315.616.818.620.222.124.2
12.513.414.415.316.517.716.618.019.521.123.225.221.523.525.711.212.013.014.215.416.618.019.521.323.125.4
2.272.512.783.023.323.623.223.543.914.284.795.243.934.354.812.112.312.552.833.133.403.734.074.494.935.441.641.801.992.182.442.672.953.273.623.934.311.631.791.952.152.362.602.853.193.493.864.28
FHACD202V223J1LHZ0FHACD202V273J1LHZ0FHACD202V333J1LHZ0FHACD202V393J1LHZ0FHACD202V473J1LHZ0FHACD202V563J1LHZ0FHACD202V683J2LEZ0FHACD202V823J2LEZ0FHACD202V104J2LEZ0FHACD202V124J2LEZ0FHACD202V154J2LEZ0FHACD202V184J2LEZ0FHACD202V224JTLJZ0FHACD202V274JTLJZ0FHACD202V334JTLJZ0FHACD252V153JRLQZ0FHACD252V183JRLQZ0FHACD252V223JRLQZ0FHACD252V273JRLQZ0FHACD252V333JRLQZ0FHACD252V393JRLQZ0FHACD252V473JRLQZ0FHACD252V563JRLQZ0FHACD252V683JRLQZ0FHACD252V823JRLQZ0FHACD252V104JRLQZ0FHACD3B2V682JRLQZ0FHACD3B2V822JRLQZ0FHACD3B2V103JRLQZ0FHACD3B2V123JRLQZ0FHACD3B2V153JRLQZ0FHACD3B2V183JRLQZ0FHACD3B2V223JRLQZ0FHACD3B2V273JRLQZ0FHACD3B2V333JRLQZ0FHACD3B2V393JRLQZ0FHACD3B2V473JRLQZ0FHACD402V392JRLQZ0FHACD402V472JRLQZ0FHACD402V562JRLQZ0FHACD402V682JRLQZ0FHACD402V822JRLQZ0FHACD402V103JRLQZ0FHACD402V123JRLQZ0FHACD402V153JRLQZ0FHACD402V183JRLQZ0FHACD402V223JRLQZ0FHACD402V273JRLQZ0
HACD3D223JHACD3D273JHACD3D333JHACD3D393JHACD3D473JHACD3D563JHACD3D683JHACD3D823JHACD3D104JHACD3D124JHACD3D154JHACD3D184JHACD3D224JHACD3D274JHACD3D334JHACD3E153JHACD3E183JHACD3E223JHACD3E273JHACD3E333JHACD3E393JHACD3E473JHACD3E563JHACD3E683JHACD3E823JHACD3E104JHACD3F682JHACD3F822JHACD3F103JHACD3F123JHACD3F153JHACD3F183JHACD3F223JHACD3F273JHACD3F333JHACD3F393JHACD3F473JHACD3G392JHACD3G472JHACD3G562JHACD3G682JHACD3G822JHACD3G103JHACD3G123JHACD3G153JHACD3G183JHACD3G223JHACD3G273J
(1)The maximum ripple current : +85℃max., 100kHz, sine wave(2)WV(Vac) : 50Hz or 60Hz, sine wave
2000
2500
3150
4000
22.7
27.7
0.8
1.0
1.0
1.0
1.0
30.0
30.0
34.7
34.7
350
500
630
720
42.7
34.7
17.5
22.5
37.5
30.0
HACDSeries
φd±0.05
15 m
in.
6 m
ax.
MARKING
F±1.0
◆DIMENSIONS (mm)
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
119 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
RoHS2Compliant
◆STANDARD RATINGS
◆SPECIFICATIONS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd0.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.01.20.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.22
8.79.39.8
10.411.312.113.114.012.913.815.116.518.019.318.419.921.723.625.828.18.69.39.8
10.711.312.113.014.012.513.514.616.117.318.9
8.38.89.3
10.010.811.612.513.412.313.214.415.717.118.417.518.920.622.524.626.88.38.89.5
10.210.811.612.413.411.912.913.915.316.518.0
3.503.814.184.565.035.526.106.685.676.216.877.618.419.158.249.009.3410.010.010.03.003.323.684.064.424.855.295.834.785.285.796.477.097.83
FHACB631V333J0LGZ0FHACB631V393J0LGZ0FHACB631V473J0LGZ0FHACB631V563J0LGZ0FHACB631V683J0LGZ0FHACB631V823J0LGZ0FHACB631V104J0LGZ0FHACB631V124J0LGZ0FHACB631V154J1LHZ0FHACB631V184J1LHZ0FHACB631V224J1LHZ0FHACB631V274J1LHZ0FHACB631V334J1LHZ0FHACB631V394J1LHZ0FHACB631V474J2LEZ0FHACB631V564J2LEZ0FHACB631V684J2LEZ0FHACB631V824J2LEZ0FHACB631V105J2LEZ0FHACB631V125J2LEZ0FHACB102V183J0LGZ0FHACB102V223J0LGZ0FHACB102V273J0LGZ0FHACB102V333J0LGZ0FHACB102V393J0LGZ0FHACB102V473J0LGZ0FHACB102V563J0LGZ0FHACB102V683J0LGZ0FHACB102V823J1LHZ0FHACB102V104J1LHZ0FHACB102V124J1LHZ0FHACB102V154J1LHZ0FHACB102V184J1LHZ0FHACB102V224J1LHZ0
HACB2J333JHACB2J393JHACB2J473JHACB2J563JHACB2J683JHACB2J823JHACB2J104JHACB2J124JHACB2J154JHACB2J184JHACB2J224JHACB2J274JHACB2J334JHACB2J394JHACB2J474JHACB2J564JHACB2J684JHACB2J824JHACB2J105JHACB2J125JHACB3A183JHACB3A223JHACB3A273JHACB3A333JHACB3A393JHACB3A473JHACB3A563JHACB3A683JHACB3A823JHACB3A104JHACB3A124JHACB3A154JHACB3A184JHACB3A224J
(1)Capacitance tolerance:Standard (J:±5%),Option (H:±3%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
●Maximum operating temperature 105℃ .●Allowable temperature rise 15K max.●A little hum is produced when applied AC voltage.
Items-40 to +105℃630 to 4000Vdc
630500
10001000 1000 1000
1600 20001000 1000 1000
400031501250
J:±5%
Category temperature rangeRated voltage range Capacitance tolerance
No degradation, at 150% of rated voltage shall be applied for 60 seconds.Voltage proof(Terminal - Terminal)
No more than 0.05% : Equal or less than 1μF.No more than (cх0.015+0.05)% : More than 1μF.
Dissipation factor (tanδ)
No less than 30000MΩ : Equal or less than 0.33μF.No less than 10000ΩF : More than 0.33μF.
The following specifications shall be satisfied, after 1000hrs with applying rated voltageх125% at 105℃ .
Rated voltage (Vdc)
Appearance
Dissipation factor (tanδ)Capacitance change
Appearance
Dissipation factor (tanδ)Capacitance change
Insulation resistance(Terminal - Terminal)
The following specifications shall be satisfied, after 500hrs with applying rated voltage at 40℃90~95%RH.
No serious degradation
No serious degradation.No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
No less than 10000MΩ : Equal or less than 0.33μF. No less than 3000ΩF : More than 0.33μF.Not more than initial specification at 1kHz.Within ±5% of initial value.
Insulation resistance (Terminal - Terminal)
Measurement voltage (Vdc)
Insulation resistance (Terminal - Terminal)
Endurance
Loading under dampheat
Characteristics
630
1000
22.7
27.7
17.7
17.7
22.7
22.5
0.8
0.8
300
350
1.0
12.5
17.5
12.5
17.5
HACBSeries
120 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
◆STANDARD RATINGS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd0.270.330.390.470.560.680.821.01.20.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.390.470.560.680.821.00.00470.00560.00680.00820.010.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.270.330.39
18.019.621.122.925.027.322.825.027.18.59.29.8
10.511.312.213.114.013.314.415.516.918.417.218.620.322.324.426.321.923.725.827.627.08.89.3
10.010.711.512.313.514.615.813.014.015.116.417.619.117.419.020.622.824.727.223.425.927.9
17.118.620.121.923.826.021.823.825.88.28.89.3
10.110.811.712.513.412.713.714.816.117.516.417.719.321.323.325.120.822.624.626.325.78.59.09.6
10.211.011.812.913.915.112.413.414.415.616.818.216.618.119.621.823.625.922.324.726.6
7.077.828.509.3410.010.08.449.3410.02.683.003.293.634.034.454.845.314.615.085.586.166.756.026.607.298.088.939.347.107.758.549.348.571.321.581.932.322.833.394.244.474.943.864.274.645.095.566.125.295.846.407.157.848.666.477.157.77
FHACB102V274 J2LEZ0FHACB102V334 J2LEZ0FHACB102V394 J2LEZ0FHACB102V474 J2LEZ0FHACB102V564 J2LEZ0FHACB102V684 J2LEZ0FHACB102V824 J4LJZ0FHACB102V105 J4LJZ0FHACB102V125 J4LJZ0FHACB1C2V123 J0LGZ0FHACB1C2V153 J0LGZ0FHACB1C2V183 J0LGZ0FHACB1C2V223 J0LGZ0FHACB1C2V273 J0LGZ0FHACB1C2V333 J0LGZ0FHACB1C2V393 J0LGZ0FHACB1C2V473 J0LGZ0FHACB1C2V563 J1LHZ0FHACB1C2V683 J1LHZ0FHACB1C2V823 J1LHZ0FHACB1C2V104 J1LHZ0FHACB1C2V124 J1LHZ0FHACB1C2V154 J2LEZ0FHACB1C2V184 J2LEZ0FHACB1C2V224 J2LEZ0FHACB1C2V274 J2LEZ0FHACB1C2V334 J2LEZ0FHACB1C2V394 J2LEZ0FHACB1C2V474 J4LJZ0FHACB1C2V564 J4LJZ0FHACB1C2V684 J4LJZ0FHACB1C2V824 J4LJZ0FHACB1C2V105 JULWZ0FHACB162V472 JKLDZ0FHACB162V562 JKLDZ0FHACB162V682 JKLDZ0FHACB162V822 JKLDZ0FHACB162V103 JKLDZ0FHACB162V123 JKLDZ0FHACB162V153 JKLDZ0FHACB162V183 JKLDZ0FHACB162V223 JKLDZ0FHACB162V273 J1LHZ0FHACB162V333 J1LHZ0FHACB162V393 J1LHZ0FHACB162V473 J1LHZ0FHACB162V563 J1LHZ0FHACB162V683 J1LHZ0FHACB162V823 J2LEZ0FHACB162V104 J2LEZ0FHACB162V124 J2LEZ0FHACB162V154 J2LEZ0FHACB162V184 J2LEZ0FHACB162V224 J2LEZ0FHACB162V274 J4LJZ0FHACB162V334 J4LJZ0FHACB162V394 J4LJZ0
HACB3A274JHACB3A334JHACB3A394JHACB3A474JHACB3A564JHACB3A684JHACB3A824JHACB3A105JHACB3A125JHACB3B123JHACB3B153JHACB3B183JHACB3B223JHACB3B273JHACB3B333JHACB3B393JHACB3B473JHACB3B563JHACB3B683JHACB3B823JHACB3B104JHACB3B124JHACB3B154JHACB3B184JHACB3B224JHACB3B274JHACB3B334JHACB3B394JHACB3B474JHACB3B564JHACB3B684JHACB3B824JHACB3B105JHACB3C472JHACB3C562JHACB3C682JHACB3C822JHACB3C103JHACB3C123JHACB3C153JHACB3C183JHACB3C223JHACB3C273JHACB3C333JHACB3C393JHACB3C473JHACB3C563JHACB3C683JHACB3C823JHACB3C104JHACB3C124JHACB3C154JHACB3C184JHACB3C224JHACB3C274JHACB3C334JHACB3C394J
(1) Capacitance tolerance:Standard(J:±5%) ,Option(H:±3%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
1000
1250
1600
22.7
27.7
42.7
17.7
27.7
42.7
52.7
19.7
22.7
27.7
42.7
17.5
0.8
0.8
350
400
450
1.0
1.0
1.0
22.5
37.5
12.5
22.5
22.5
37.5
37.5
47.5
15.0
17.5
HACBSeries
121 CAT. No. E1003U
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
◆STANDARD RATINGS
ELECTRONIC EQUIPMENT FILM CAPACITOR
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd
WV(Vdc)
Cap Dimensions (mm) Maximum ripple current
(Arms)WV
(Vac)Part Number Previous Part Number
(Just for your reference)(µF) W H T F φd
0.0010.00120.00150.00180.00220.00270.00330.00390.00470.00560.00680.00820.010.0120.0150.0180.0220.0270.0330.0390.0470.0560.0680.0820.10.120.150.180.220.27
0.00470.00560.00680.00820.010.0120.0150.0180.0220.0270.0330.00270.00330.00390.00470.00560.00680.00820.010.0120.0150.018
12.012.913.915.016.317.519.320.922.925.227.512.713.714.615.717.018.420.021.823.726.228.5
11.512.313.314.315.516.718.419.921.924.026.212.113.113.915.016.217.519.020.722.625.027.1
2.602.843.133.443.804.164.655.095.636.246.901.561.912.252.723.243.714.074.494.925.506.03
8.39.09.69.3
10.08.59.19.6
10.211.011.812.713.714.816.313.214.315.517.018.319.817.919.421.223.225.327.922.124.526.5
8.18.69.29.09.68.28.79.29.8
10.511.312.113.114.115.512.613.614.816.217.418.817.018.520.222.124.126.621.123.425.3
0.280.340.420.510.620.760.931.101.331.531.922.322.833.394.243.523.894.314.775.195.694.895.395.916.537.158.005.676.276.95
FHACB202V102JKLDZ0FHACB202V122JKLDZ0FHACB202V152JKLDZ0FHACB202V182JKLDZ0FHACB202V222JKLDZ0FHACB202V272JKLDZ0FHACB202V332JKLDZ0FHACB202V392JKLDZ0FHACB202V472JKLDZ0FHACB202V562JKLDZ0FHACB202V682JKLDZ0FHACB202V822JKLDZ0FHACB202V103JKLDZ0FHACB202V123JKLDZ0FHACB202V153JKLDZ0FHACB202V183J1LHZ0FHACB202V223J1LHZ0FHACB202V273J1LHZ0FHACB202V333J1LHZ0FHACB202V393J1LHZ0FHACB202V473J1LHZ0FHACB202V563J2LEZ0FHACB202V683J2LEZ0FHACB202V823J2LEZ0FHACB202V104J2LEZ0FHACB202V124J2LEZ0FHACB202V154J2LEZ0FHACB202V184J4LJZ0FHACB202V224J4LJZ0FHACB202V274J4LJZ0
FHACB3B2V472JLLQZ0FHACB3B2V562JLLQZ0FHACB3B2V682JLLQZ0FHACB3B2V822JLLQZ0FHACB3B2V103JLLQZ0FHACB3B2V123JLLQZ0FHACB3B2V153JLLQZ0FHACB3B2V183JLLQZ0FHACB3B2V223JLLQZ0FHACB3B2V273JLLQZ0FHACB3B2V333JLLQZ0FHACB402V272JLLQZ0FHACB402V332JLLQZ0FHACB402V392JLLQZ0FHACB402V472JLLQZ0FHACB402V562JLLQZ0FHACB402V682JLLQZ0FHACB402V822JLLQZ0FHACB402V103JLLQZ0FHACB402V123JLLQZ0FHACB402V153JLLQZ0FHACB402V183JLLQZ0
HACB3D102JHACB3D122JHACB3D152JHACB3D182JHACB3D222JHACB3D272JHACB3D332JHACB3D392JHACB3D472JHACB3D562JHACB3D682JHACB3D822JHACB3D103JHACB3D123JHACB3D153JHACB3D183JHACB3D223JHACB3D273JHACB3D333JHACB3D393JHACB3D473JHACB3D563JHACB3D683JHACB3D823JHACB3D104JHACB3D124JHACB3D154JHACB3D184JHACB3D224JHACB3D274J
HACB3F472JHACB3F562JHACB3F682JHACB3F822JHACB3F103JHACB3F123JHACB3F153JHACB3F183JHACB3F223JHACB3F273JHACB3F333JHACB3G272JHACB3G332JHACB3G392JHACB3G472JHACB3G562JHACB3G682JHACB3G822JHACB3G103JHACB3G123JHACB3G153JHACB3G183J
(1)Capacitance tolerance:Standard (J:±5%),Option (H:±3%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
(1)Capacitance tolerance : Standard (J:±5%) , Option (K:±10%)(2)The maximum ripple current : +85℃max., 100kHz, sine wave(3)WV(Vac) : 50Hz or 60Hz, sine wave
2000
3150
4000
34.7
34.7
30.0
φd±0.05
30.0
1.0
1.0
920
920
22.7
19.7
27.7
42.7
17.5
0.8
450
1.0
15.0
22.5
15 m
in.
6 m
ax.
MARKING
F±1.0
37.5
◆DIMENSIONS (mm)
HACBSeries
+2.5-1.0W +2.0
-1.0T
+2.5
-1.0
H
122 CAT. No. E1003U
Recommended