Thickness Gauges

Metal Polishing and CleaningBrushesM. W. Jenkins' Son Inc.Cedar Grove, N.J.

Designed for effective cleaning andpolishing of cold-rolled steel, metallicfoils, and similar sheet materials, thesespecialized rotary brushes are one of theMetlkor series of high-performancebrush products. Also effective for re­moving grit from plastics, rubber, paper

board, and textiles, the brushes are dy­namically balanced for long life andminimum vibration. Applications in­clude a wide range of manufacturing,finishing, and appearance enhancementuses. Metal core materials include steel,stainless steel, bronze, magnesium, andother exotic metals.Availablebristle ma­terials include most all synthetic and nat­ural, nylon, fiber, and wire.

Circle 416 on the reader service card

ize and hard coat on aluminum; and zinc,cadmium, copper, chrome, or Teflon onsteel or aluminum.

Toll Free 1·800·448·3835

Parts WashersLanda Inc.Camas, Wash.

Landa's new line of SJ solvent-freeparts washers, featuring the company's

Circle 417 on the reader service card

Molten Salt BathKolene Corp.Detroit

Kolene's SBN molten salt bath tech­nology is an alternative to conven­tional heat-treat methods that only im­prove surface hardness or loadcapacity. The process improves all ofthe basic engineering properties-sur­face hardness, wear resistance, lubric­ity, fatigue strength, gall resistance,and corrosion resistance. SBN is athermochemical heat-treating systemalso called ferritic nitrocarburizing.Metals that are processed effectivelythrough SBN include low and mediumcarbon steel, powder metals, steel, aus­tinitic steels, tool and die steels, cast,gray and nodular iron, and a broadrange of alloy steels.

Circle 418 on the reader service card

Availablewith Built-Inor Separate

Probe

Thickness GaugesJustech Inc.West Chester, Ohio

Justech's ETG series of micropro­cessor-based, hand-held coating/plat­ing thickness gauges are ruggedly con­structed for the metal-finishingindustry in appliance, automotive, fas­tener, and other industrial applications.They provide a low-cost alternative foraccurate, efficient coating/plating thick­ness inspection including paint and pow­der coating on aluminum or steel; anod-

802 Proctor Ave.·P.O. Box 676 • Ogdensburg, NY13669 U.S.A.Tel (315)393-4450· Fax (315) 393·8471 • Web http://www.defelsko.com

NEW Flip Display and Indicator Light

IDeFe'SkO®1CORPORATION

• Basic, Standard (Statistics) orMemory Models Available

• Simple Two-Button Operation on All Models

• Solvent, Acid, Oil, Water and Dust Resistant

• Ideal for Painters, Powder Coaters, Platers,Galvanizers, Anodizers... and More

Circle015 on reader information card

66 METAL FINISHING • OCTOBER 1998