Thick film passivate

Preview:

Citation preview

NEWproaucts

1000°FELECTRIC WALK-IN OVENGrieve Corp. offers No. 946, a1,000°F, electrically heated vertical air­flow walk-in oven currently used forcuring coatings on titanium screens.Workspace dimensions measure 72"

W x 156" 0 x 96" H. The 360-kWinstalled Incoloy-sheathed tubularheating elements provide the power,while a 24,500-CFM, 20-hp recirculat­ing blower provides a vertical down­ward airflow to the workload. ThisGrieve oven features 8" insulated walls,type 304L,2B finish stainless steel inte­rior, stainless steel exterior with #4brushed finish, and 6" insulated floorwith integral truck wheel guide tracksfor easyloading and unloading.

No. 946 has double doors, front andrear, each with inner and outer doorgaskets. The inner gasket seals againstthe door plug, while the outer gasketseals directly against the front of theoven. A removable top-mounted heatchamber (removed in photo) is alsoprovided. Safety equipment isonboard for handling flammable sol­vents, including explosion-ventingdoor hardware. Also featured on thisGrieve walk-in oven are a digital pro­gramming temperature controller,manual reset excess temperature con­troller with separate contactors, recir­culating blower airflow safety switch,and SCR power controller. For moreinformation, call (847) 546-8225 orvisit www.grievecorp.com,

www.metalfinishing.com/advertisers

ONE-WAYTOTE FORLIQUID COMPOUNDSThe MatchlessMetal Polish Co. hasdeveloped the Match-Vat one-waytote for liquid compounds. The

www.metalfinishing.com

unique Match-Vat uses an air blad­der to completely force all com­pound from the 225-gallon card­board bulk tank. Once empty, thistank can be collapsed and complete­ly disposed of in your normal trash.

The compound bladder is filled atthe factory, and no air or contami­nates can get in, as it is tied directlyto the customers pump. The Match­Vat, which is never opened, elimi­nates scraping ofcompound, storingof empties, and shipping costs asso­ciated with returning empty contain­ers to customers. For more informa­tion, call (773) 924-1515 or visitwww.matchlessmetals.com

www.metaLfinishing.com/advertisers

ROTARY SCREW COMPRESSORKaeser is now offering its new SXAirCenter. This unit includes arotary screw compressor, dryer, andtank in one space-saving package.

Available in 3-7.5 hp, the SXAirCenter provides pressures from125-217 and capacities to 28.3 cfm.In addition, these fully operationalcompressed air systems are easy toinstall-just connect the power andair-line and you're up and running.

The unit also includes a sound­proofed enclosure to provide noise lev­els as low as 62 dB(A)-the lowest onthe market, according to the manufac­turer. Maintenance is a breeze with itseasily removable side panel, screw-onseparator filter, and adjustment-freeelastic drive belt. Sigma Control Basiccomes standard to regulate and moni-

tor the compressor. Clean air treat­ment package optional. For moreinformation, call (800) 777-7873 orvisit www.kaeser.ccm/aircenter,

www.metaLfinishing.com/advertisers

THICK FILM PASSIVATECoventya, lnc., is now offeringLanthane 316, a revolutionaryroom-temperature, thick-film passi­vate. Parts processed in Lanthane316 exhibit superior white corrosionresistance while reducing trivalentchromium consumption by 80%.Increased bath life and reduced ener­gy consumption also provide uniqueoperating advantages. For moreinformation, call (216) 351-1500,e-mail m.kellyts'coventya.com, orvisit www.coventya.com.

www.metalfinishing.com/advertisers

Magnaflux-a division of IllinoisTool Works, Inc., and a worldwidesupplier of liquid dye penetrant andmagnetic particle inspection materi­als, accessories, and equipment-hasannounced its new Multi-StationProcess Control Digital Timer forsimultaneous process timing at mul­tiple Zyglo liquid penetrant stations.

Benefits: Set four distinctive audi­ble and visual alarms for your liquidpenetrant inspection stations.• Penetrantdwell• Rinse time• Emulsification time• Developer dwell

Features:• LCD display: The largedigital LCD

screen is easyto read.

February 2010 I metalfinishing 153

Recommended