The Paint bucket

The Paint bucket Daniel Kanu

Objectives:

To generate raw materials that could be used in other projects To explore ways in which lines and geometric forms can be achieved

Materials:A small bucket or container.A screw driver or a nail to place a hole at the. bottom of the container.A stopper to cover up the hole.Some papers or a canvas. A gallon of latex paint.A sturdy piece of rope. A durable hanging apparatus. And a pair of Latex gloves.

Process:Insert a hole at the bottom of the container. Use the stopper to plug up the hole. Attach one end of the rope to the handle of the container. Hang up the container from the ceiling . Place the canvas or papers about on the floor below the hanging containerPour paint into the bucket. Unplug the the hole from the bottom to allow the paint to drip. Either swing the container a into motion and let it takes its natural course or you can Manually control it’s movement.

Process video