View
231
Download
3
Category
Tags:
Preview:
Citation preview
Why Q-Diss?
The validation of dissolution testers often requires different logbooks and a lot of paper. There is a lack of consistency and the test procedures are difficult to regulate
Q-diss provides a single standard procedure, defined by you, for all testers. It eliminates the need for excessive paperwork, and offers an ongoing history and traceability for any bath
Q-Diss
The dissolution qualification system
• Works with all baths• Guides you through each test with simple
SOPs• ASTM or USP • Produces full report• UV or HPLC add on
There are three levels of user offering differing levels of access and control enabling full control over the protocols and how they are performed
...and allows you to create your specific protocol be selecting the SOPs required for your own configuration
To start a protocol select the protocol and system ID. – the same protocol can be run for multiple testers, or each tester can have a separate protocol
Select the test that you want to run – tests may be run in any order, but the protocol will not complete until all tests have been completed satisfactorily
Fill in the data as Q-Diss guides you through the test – it is not possible to perform a test incorrectly
When the validation is completed it is possible to print out the complete validation logbook, including SOPs, Calibration certificates and any deviations, or simply store as a PDF.
Recommended