View
14
Download
3
Category
Preview:
DESCRIPTION
Amritsar AAI Tender BOQ
Citation preview
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
ELECTRICAL WORKS (A) SUPPLY OF IMPORTED ITEMS (Item No. 10 to 26)10 Supply of inset type bidirectional Runway centreline fitting complete with
bottom box & all aceessories i/c halogen lamp, lense/ filter, reflector etc. asrequired & as specified:
10 a Bi-directional clear/clear 163 Nos. Each Item No 10(a) Supply RW CL fitting-Clear
EA
11 b Bi-directional clear/red 80 Nos. Each Item No 10(b) Supply RW CL fitting-Red
EA
11 Supply of inset type bidirectional taxiway centreline fitting complete withbottom box & all aceessories i/c halogen lamp, lense/ filter, reflector etc. asrequired & as specified:
12 a Bi-directional green/green 220 Nos. Each Item No 11(a) Supply TW CL fitting-Green
EA
13 b Bi-directional green/yellow 25 Nos. Each Item No 11(b) Supply TW CL fitting-Yello
EA
14 12 Supply of inset type Omnidirectional Aircraft Stand Manouvering Guidancelight fixture with halogen lamp with yellow interference, complete withbottom box and all accessories including halogen lamp , lens/filter,reflector, etc as required and as specified.
150 Nos. Each Item No 12 Supply Guidance fitting
EA
15 13 Supply of inset type Unidirectional Aircraft Stand Manouvering GuidanceSTOP light fixture with Red interface & with halogen lamp complete withbottom box and all accessories including halogen lamp , lens/filter, reflector,etc as required and as specified.
8 Nos. Each Item No 13 Supply Guidance Stop fitting
EA
16 14 Supply of inset type uni-directional Intermediate holding position light fittingcomplete with bottom box & all aceessories i/c halogen lamp, lense/ filter,reflector etc. as required & as specified
20 Nos. Each Item No 14 Supply IHP fitting
EA
15 Supply of shallow bases of following inset fixtures as required 17 a 8 inch base with bottom entry 50 Nos. Each Item No 15(a)
Supply shallow base 8 In
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 112
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
18 b 12 inch base with bottom entry 15 Nos. Each Item No 15(b) Supply shallow base
EA
16 Supply of top assembley of following inset fixtures as required for the belowfixutures:
19 a Bidirectional clear/clear inset type runway centreline light fitting i/c allaceessories i/c halogen lamp, lense/ filter, reflector etc. as required & asspecified
10 Nos. Each Item No 16(a) Top Assembly R/W C/L-Clear
EA
20 b Bidirectional Red/clear inset type runway centreline light fitting i/c allaceessories i/c halogen lamp, lense/ filter, reflector etc. as required & asspecified
5 Nos. Each Item No 16(b) Top Assembly R/W C/L-Red
EA
21 c Unidirectional inset type runway Touch Down Zone light fitting i/c allaceessories i/c halogen lamp, lense/ filter, reflector etc. as required & asspecified
10 Nos. Each Item No 16(c) Top Assembly TDZ
EA
22 d Unidirectional inset type Approch Centrelinelight fitting i/c all aceessories i/chalogen lamp, lense/ filter, reflector etc. as required & as specified
2 Nos. Each Item No 16(d) Top Assembly APP C/L
EA
23 e Unidirectional inset type Approch Side Row light fitting i/c all aceessories i/chalogen lamp, lense/ filter, reflector etc. as required & as specified
2 Nos. Each Item No 16(e) Top Assembly APP S/R
EA
24 f Unidirectional inset type Threshold light fitting i/c all aceessories i/chalogen lamp, lense/ filter, reflector etc. as required & as specified
4 Nos. Each Item No 16(f) Top Assembly Threshold
EA
25 g Unidirectional inset type runway End light light fitting i/c all aceessories i/chalogen lamp, lense/ filter, reflector etc. as required & as specified
3 Nos. Each Item No 16(g) Top Assembly R/W End
EA
26 h Bidirectional inset type runway EDGE light fitting i/c all aceessories i/chalogen lamp, lense/ filter, reflector etc. as required & as specified
5 Nos. Each Item No 16(h) Top Assembly R/W Edge
EA
17 Supply of consumables for Imported fixtures:
27 a Clear lens/prism for Runway centerline fixture 15 Nos. Each Item No 17(a) Lens R/W C/L
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 113
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
28 b Clear lens /prism for TDZ fixture 20 Nos. Each Item No 17(b) Lens TDZ
EA
29 c Clear lens for Approach centerline fixture 5 Nos. Each Item No 17(c) Lens APP C/L
EA
30 d Clear lens for Approach side row fixure 5 Nos. Each Item No 17(d) Lens APP S/R
EA
31 e Clear lens for Threshold fixture 5 Nos. Each Item No 17(e) Lens Threshold
EA
32 f Clear lens for Runway End fixture 5 Nos. Each Item No 17(f) Lens R/W End
EA
33 g Clear lens/prism for taxiway centerline fixture 5 Nos. Each Item No 17(g) Lens T/W C/L
EA
34 h Clear lens/prism for Omnidirectional Aircraft Stand Manouvering Guidancelight fixture
5 Nos. Each Item No 17(h) Lens Guidence Light
EA
35 i Clear lens/prism for Intermediate holding position light fitting 5 Nos. Each Item No 17(i) Lens IHP Lights
EA
36 j Red filter for Runway centerline fixture 20 Nos. Each Item No 17(j) Red Filter R/W C/L
EA
37 k Yellow filter for Runway centerline fixture 10 Nos. Each Item No 17(k) Yellow Filter R/W C/L
EA
38 l Red filter for Approach side Row fixtures 10 Nos. Each Item No 17(l) Red Filter APP S/R
EA
39 m Green filter for taxiway centerline fixture 30 Nos. Each Item No 17(m) Green Filter T/W C/L
EA
40 n Yellow filter for taxiway centerline fixture 10 Nos. Each Item No 17(n) Yellow Filter T/W C/L
EA
41 o Yellow filter for Omnidirectional Aircraft Stand Manouvering Guidance lightfixture
30 Nos. Each Item No 17(o) Yellow Filter Guiden Light
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 114
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
42 p Yellow filter for Intermediate holding position light fitting 5 Nos. Each Item No 17(p) Yellow Filter IHP Light
EA
18 Supply of halogen lamp as specified in particular specification for thefollowing fittings:
43 a Inset type Runway centerline fixture 45 W, 6.6 A 50 Nos. Each Item No 18(a) Lamp R/W C/L
EA
44 b Inset type Approach centerline fixture 105 W, 6.6 A 50 Nos. Each Item No 18(b) Lamp APP C/L
EA
45 c Inset type Taxiway centerline fixture 40W, 6.6 A 50 Nos. Each Item No 18(c) Lamp T/W C/L
EA
46 d Elevated type 150W Runway edge light pin-type along with holders. 50 Nos. Each Item No 18(d) Lamp R/W Edge
EA
47 19 Supply of 1 x 6 sq.mm, 5 KV grade, AFL cable, type-C stranded tinnedcopper conductor, XLPE insulated with copper tape screened and PE outersheath black i/c anti-termite and anti rodent treated, generally conformingto IEC TS 62100 & FAA AC 150/5345-7E (L824) & as specified in particularspecification and as required.
66500 Mtr. Mtr. Item No 19 Supply 1x6 sqmm AFL Cable
M
48 20 Supply of 2X4 sq.mm secondary lead made out of flexible copperconductor, type-B, 600V grade, EPR insulalted with colour Blue/Brown andCPE outer sheath black copper conductor, anti-termite and anti rodenttreated, AFL cable as specified in particular specification and as required.
47700 Mtr. Mtr. Item No 20 Supply 2x4sqmm secondary lead
M
49 21 Supply of 6 Sqmm plug & receptacle of type I, class B connector & suitablefield attachment with 5 KV grade XLPE insulated PE sheathed single corecopper conductor cable as specified in specification & as required.
1000 Sets Set Item No 21 Supply Plug & Receptacle
SET
22 Supply of Microprocessor based natural air cooled thyristor controlledConstant Current Regulator indoor type suitable for remote as well as localoperation with 5 position brightness,6.6 Amp, operate on input voltage230/415 V , 50Hz ac supply:
50 a 10 KVA 3 Nos. Each Item No 22(a) Supply 10KVA CCR
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 115
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
51 b 20KVA 9 Nos. Each Item No 22(b) Supply 20KVA CCR
EA
52 c 30KVA 5 Nos. Each Item No 22(c) Supply 30KVA CCR
EA
23 Supply of 5KV, 50Hz individual lamp series to series type isolatingtransformer encapsulated in polyester resin, finally moulded with neoprenerubber etc. as specified and as required for following inset fittings:
53 a 45 watts, 6.6A/6.6A, 5KV, 50Hz 50 Nos. Each Item No 23(a) Supply Isolating T/F 45 W
EA
54 b 65 watts, 6.6A/6.6A, 5KV, 50Hz 200 Nos. Each Item No 23(b) Supply Isolating T/F 65 W
EA
55 c 100 watts, 6.6A/6.6A, 5KV, 50Hz 560 Nos. Each Item No 23(c) Supply Isolating T/F 100 W
EA
56 d 150 watts, 6.6A/6.6A, 5KV, 50Hz 400 Nos. Each Item No 23(d) Supply Isolating T/F 150 W
EA
57 e 200 watts, 6.6A/6.6A, 5KV, 50Hz 50 Nos. Each Item No 23(e) Supply Isolating T/F 200 W
EA
58 24 Supply of enapsulated microprocessor driven single channel switchingdevice used for individual lamp control & monitoring of one lamp suitablefor operation on 6.6 A AGL series circuit etc complete as per specification &as specified
180 Nos. Each Item No 24 Switch Device Single Chanel
EA
59 25 Supply of enapsulated microprocessor driven dual channel switching deviceused for individual lamp control & monitoring of two lamp suitable foroperation on 6.6 A AGL series circuit etc complete as per specification & asspecified
50 Nos. Each Item No 25 Switch Device Dual Chanel
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 116
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
60 26 Supply of LED Guidance Sign Board of various sizes as per ICAO Annex.14Vol.I (legends as approved by Engineer-in-Charge) made out of anodized2mm thick Aluminium frame with suitable angle support with 1.5MM thick(minimum) Al. backcover, 4 MM thick polycarbonate sheet with glare freeface, the letter & symbol should be screen printed on inside of sign facemade of self adhesive film of 3M applied on the inside face with requiredcolouring, suitable arrangement shall be made for water tightness & lockingarrangement, signboard shall be uniformly internally illuminated with LEDlights with 24 V DC converter to achieve illumination level operated on inputsource 2.5A to 6.6A constant current without flickering including supportingfrangible legs & frame etc. complete as required and as specified.
40 Sq. Mtr.
Sq Mtr. Item No 26 LED Guidence Board
M2
(B) Supply of Indiginous Items (Item No. 27 to 32)
61 27 Supply of lead on StopBar controllar to control the stop bar light i/cprovision of interlocking with taxiway centre lights as per ICAO, complete inall respect
2 Nos. Each Item No 27 Supply of Lead on Stopbar
EA
62 28 Supply of Cubical MS transformer housing box of size 400mm high x330mm x 330mm, all sides made of 6 mm thick all around i/c bottom andtop surface of 10mm thick i/c with opening on top of dia. 210 mm at thecentre i/c 6 no. holes at equal spacewith threading to receive bolts ofsuitable sizes, continuous welded on joints having clear hole in the centeron three sides suitable to receive 50 mm dia GI pipe and having one earth bolt welded i/c 10mm thick cover plate ,as required and as specified.
550 Nos. Each Item No 28 Supply MS T/F Box Single Pkt.
EA
63 29 Supply of double pocket Cubical MS transformer housing box of size400mm high x 330mm x 750mm, all sides made of 6 mm thick all aroundi/c bottom and top surface of 10mm thick i/c with opening on top of dia.210 mm at the centre i/c 6 no. holes at equal spacewith threading toreceive bolts of suitable sizes, continuous welded on joints having clear holein the center on three sides suitable to receive two nos 50 mm dia GI pipeand having one earth bolt welded i/c 10mm thick cover plate ,as requiredand as specified.
270 Nos. Each Item No 29 Supply MS T/F Box Double Pkt.
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 117
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
64 30 Supply of cubicle MS transformer housing box of size 600X350X450 mmmade of 6mm thick all around except the top surface which is 10mm thickhaving 02 nos equidistance hole of 90 mm , 100mm above the bottom ofone side surface 600X 450 mm also a suitable hole of 50mm from 75mmabove the bottom centre on both side surface 350 X400mm & having 02drain holes at the bottom suitably tapped to receive the 02 no. 15 mm dia Bclass GI pipe . The MS top cover of size 600 X350 mm & 10 mm thick withsuitable rubber gasket & 08 no. M 10 tapped hole & bolts as required as perspecification. The housing box should have detachable stand of500mX125mmX100m made of 06mm MS rod & legs made of 8mm MS rodsuitable for keeping the isolating transformer on the top surface of thisstand etc. as per drawing
220 Nos. Each Item No 30 Supply MS T/F Box 600mm
EA
65 31 Supply of 50 mm dia GI pipe 'B' class as per relevent IS amended uptodate.
31500 Mtr. Mtr. Item No 31 Supply of 50mm dia GI Pipe
M
32 Supplying of 1100V grade multicore stranded Aluminium Conductor XLPEinsulated core laid up, extruded inner sheath of PVC, galvanised steel striparmoured & overall PVC sheathed armoured cables confirming to IS-7098(PT-I) with upto date amendments of followigs sizes:
66 a 3-1/2 X 35 Sq.mm 800 Mtr. Mtr. Item No 32(a) Supply of LT Cable 35sqmm
M
67 b 3-1/2 X 300 Sq.mm 500 Mtr. Mtr. Item No 32(b) Supply of LT Cable 300sqmm
M
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 118
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
(C) ITC etc.
68 33 Fabrication, supply & instalation of MS collar of size 200 mm high x330mm x 330mm on existing transformer housing box, all sides & bottommade of 6 mm thick all around i/c top surface of 10mm thick i/c withopening on top & bottom of dia. 210 mm at the centre i/c 6 no. holes atequal spacewith threading to receive bolts of suitable sizes at both top &bottom, i/c providing of S.S nut bolts, wahers, gasket etc., continuouswelded on joints i/c. excavation, alignment, levelling, finishing with cementplaster of projected surface of housing box of size 1 mt. x 1 mt. approx.and neat cement finish on the top etc. as reqd and as per direction ofEnginner-in charge . as required and as specified.
120 Nos. Each Item No 33 S/I of MS Colar 200mm(H)
EA
69 34 Fabrication, supply & instalation of MS collar of size 300 mm high x330mm x 330mm on existing transformer housing box, all sides & bottommade of 6 mm thick all around i/c top surface of 10mm thick i/c withopening on top & bottom of dia. 210 mm at the centre i/c 6 no. holes atequal spacewith threading to receive bolts of suitable sizes at both top &bottom, i/c providing of S.S nut bolts, wahers, gasket etc., continuouswelded on joints i/c. excavation, alignment, levelling, finishing with cementplaster of projected surface of housing box of size 1 mt. x 1 mt. approx.and neat cement finish on the top etc. as reqd and as per direction ofEnginner-in charge as required and as specified.
50 Nos. Each Item No 34 S/I of MS Colar 300mm(H)
EA
70 35 Laying of 50 mm dia GI pipe i/c providing the socket, making threads atboth ends, connecting both end to the existing transformer housing boxesusing GI check nut in soft soil upto depth of 0.5 mtr i/c getting out theexcavated the materials, returnig the soil as required in layers notexceeding 20 cm in depth including consolidating each deposit layer byramming watering etc. & disposal of unservicable material etc. as requiredas per the direction of engineer in charge.
14500 Mtr. Mtr. Item No 35 Laying GI Pipe in soft soil
M
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 119
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
71 36 Laying of 50 mm dia GI pipe i/c providing the socket, making threads atboth ends, connecting both end to the existing transformer housing boxesusing GI check nut in hard surface by using jack hammer/ hydrulicexcavator cutter etc. Upto depth of 0.5 mtr i/c getting out the excavatedmaterials, returnig the soil as required in layers not exceeding 20 cm indepth including consolidating each deposit layer by ramming watering etc.& disposal of unservicable material etc. as required as per the direction ofengineer in charge.
17000 Mtr. Mtr. Item No 36 Laying GI Pipe in hard surfce
M
72 37 Installation, testing and commissioning of inset fittings with core drilling,aligning & setting including providing sealing material & installation ofisolating transformers, crimping / joining of plug & receptacles andmoulding the leads, connection of secondary leads alongwith otheraccessories required for commissioning etc. as required.
1200 Nos. Each Item No 37 ITC of Inset Fitting
EA
73 38 Installation, testing and commissioning of lead on Stop Bar controllar i/ccontrol wiring, connections etc to control the stop bar light i/c interlocingwith taxiway centre lights as per ICAO , comple in all respect & as per thedirection of engineer incharge
2 Nos. Each Item No 38 ITC of Lead on Stopbar
EA
74 39 Installation, testing and commissioning of elevated runway edge fittingsaligning , on the existing transformer housing box i/c. installation oftransformer, lens and other accessories, alignment, levelling etc. asreqd.setting including providing coller of 50mm ,sealing material ,installation of isolating transformers, crimping / jointing of plug , receptacles and moulding / crimping the leads, connection of leads alongwith otheraccessories required for commissioning etc. as required.
270 Nos. Each Item No 39 ITC elevated R/W Edge light
EA
75 40 Installation of transformer housing box on runway / taxiway shoulder aftercutting the hard surface/bituuminous surface with the help of hammer ,Jack hammer , chiesel & disposal of debries at a lead of atleast 50 mtrs i/cmaking 150mm thick cement concrete (1:2:4) all around the box andbottom i/c. providing and fixing 10" long 1/2" dia B-class GI pipe at thebottom of the housing box for drainage of water i/c. excavation, alignment,levelling, finishing with cement plaster of projected surface of housing boxof size 1 mt. x 1 mt. approx. and neat cement finish on the top etc. as reqdans as per direction of Enginner-in charge .
270 Nos. Each Item No 40 Inst T/F Housing Box in hard
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 120
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
76 41 Installation of transformer housing box on runway / taxiway shoulder in softsoil & disposal of debries at a lead of atleast 50 mtrs i/c making 150mmthick cement concrete (1:2:4) all around the box and bottom i/c. providingand fixing 10" long 1/2" dia B-class GI pipe at the bottom of the housingbox for drainage of water i/c. excavation, alignment, levelling, finishing withcement plaster of projected surface of housing box of size 1 mt. x 1 mt.approx. and neat cement finish on the top etc. as reqd ans as per directionof Enginner-in charge .
770 Nos. Each Item No 41 Inst T/F Housing Box in soil
EA
77 42 Installation of guidance signboards of various sizes i/c installation ofisolating transformer and providing secondary leads etc. i/c supply of allmaterials (except isolating transformer), i/c pedestal upto 1m all around thesignage with 1:2:4 (cement, concrete, coarse) of thickness 100mm withneat cement finish plaster, testing and commissioning etc. as required.
10 Nos. Each Item No 42 Inst of Guide. Sign Board
EA
43 Installation, testing & commissioning of microcesser cotrolled CCRs offollowing ratings including providing earth connection with GI strip of size25mmx5mm, all necessary arrangement, supply & laying of control cables,end terminations & earthing with G.I Strip, connection i/c supply/laying of 8core control cable & XLPE insulated, PVC sheathed armoured power cableof suitable size etc. for commissioning of CCR etc. as required & as directed by Engineer-Incharge.
78 a) 10 KVA 3 Nos. Each Item No 43(a) ITC of 10KVA CCR
EA
79 b) 20KVA 9 Nos. Each Item No 43(b) ITC of 20KVA CCR
EA
80 c) 30KVA 5 Nos. Each Item No 43(c) ITC of 30KVA CCR
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 121
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
81 44 Dismentaling / Translocation / Installation, testing and commissioning ofexisting Precision Approach Path Indicator ( PAPI) units ( 4Nos.) includingsetting designs, foundations constuction of checking strip base etc. &connection of isolating transformer, connecting kit, secondary leads etc. asrequired
2 Jobs Each Item No 44 Disment & ITC of PAPI
JOB
82 45 Earthing with GI earth pipe 4.5 m long and 40mm dia, including accessoriesand providing masonary enclosure with cover plate on the top havinglocking arrangement and watering pipe, complete with charcoal and saltetc. as required.
90 Mtr. Mtr. Item No 45 Pipe Earthing
M
83 46 Providing and Laying earth connection from earth electrode with 6 SWG diaGI wire in 15mm dia GI pipe from earth electrode as required.
500 Mtr. Mtr. Item No 46 P/L 6 SWG earth wire in pipe
M
47 Cutting kerf of suitable size i/c chipping, hammering, cleaning & drying etc.& refilling the kerf with sealant material etc. as reqd. & laying followingnumbers of secondary leads:-
84 a 01 No. Secondary lead of size 2x4 sq.mm. 24000 Mtr. Mtr. Item No 47(a) Kerf Cut for 01 no. lead
M
85 b 2 No. Secondary lead of size 2x4 sq.mm. 2400 Mtr. Mtr. Item No 47(b) Kerf Cut for 02 no. lead
M
86 c 3 No. Secondary lead of size 2x4 sq.mm. 4300 Mtr. Mtr. Item No 47(c) Kerf Cut for 03 no. lead
M
87 d 4 Nos. Secondary lead of size 2x4 sq.mm. 1500 Mtr. Mtr. Item No 47(d) Kerf Cut for 04 no. lead
M
48 Supplying and making end termination with brass compression gland andaluminium lugs for following size of PVC insulated and PVC sheathed / XPLEaluminium conductor cable of 1.1 KV grade as required.
88 a 3.5 x 300 sq.mm 4 Sets Set Item No 48(a) End Term 300 sqmm
SET
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 122
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
89 b 3.5 x 35 sq.mm 30 Sets Set Item No 48(b) End Term 35 sqmm
SET
90 49 Providing & laying of 6SWG dia GI wire in the existing pipe etc. as reqd. 66500 Mtr. Mtr. Item No 49 P/L of 6 SWG earth wire
M
92 51 Design, manufacturing, supplying, installing, testing and commissioning ofMV panel for operation on 415Volt, 50 Hz, ac supply made out of 2 mmthick CRCA sheet steel indoor type cubical fully compartmerntlizedextensible on both sides totally enclosed dust tight vermin proof floormounted , complete with painting ,internal wiring connection, bus bar offollowing capacity for all three phase with a saperate bus bar for neutralconnection and comprising of following switchgears and accessories asrequired :-
a TPN Al. Bus Bar of 400 Amps.
b Incoming - FP MCCB 400A, 35KA - 02 Nos.
c Bus Coupler - FP MCCB 400A, 35KA - 01 Nos.
d 3 nos LED type phase indicating lamps each backed up with MCB and toggleswitch for incomer.
e CT operated electronic ammeter with in-built selector switch for incomers.
f 0-500 Volts range electronic voltmeter with in-built selector switch forincomers.
g OUTGOINGS:
i 20 Nos. 100 Amps., TPN MCCB 35 KA
ii 03. no. vacant space for mounting 100 amp. MCCB
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 123
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
iii one 'ON & OFF' indication lamps(LED) & CT operated electronic ammeterwith in-built selector switch for each outgoing
1 Job Job Item No 51 SITC of MV Panel
JOB
93 52 Supply & laying of 01 No. 50 mm dia size HDPE pipe through trenchlesstechnology upto a depth of approx. 2 meter as required and as specified..
5000 Mtr. Mtr. Item No 52 S/L 50 mm HDPE pipe
M
94 53 Laying of one no. PVC insulated & PVC sheathed AFL cable of 5 KV gradesize upto 25 sqmm direct in ground i/c excavation, sand cushioning,protective covering and refilling the trench etc. as reqd.
6900 Mtr. Mtr. Item No 53 Laying cable in Ground
M
95 54 Laying of one no. additional PVC insulated & PVC sheathed AFL cable of 5KV grade size upto 25 sqmm direct in ground i/c excavation, sandcushioning, protective covering and refilling the trench etc. as reqd.
14300 Mtr. Mtr. Item No 54 Laying add. cable in Ground
M
96 55 Laying of one no. PVC insulated & PVC sheathed AFL cable of 5 KV gradesize upto 25 sqmm in the existing RCC/ METAL/HDPE pipe as reqd.
43000 Mtr. Mtr. Item No 55 Laying cable in pipe
M
56 Laying of one number PVC insulated and PVC sheathed / XLPEpower/control/AFL cable of upto 5KV grade of following sizes in the existingmasonary open duct as required.:-
97 a upto 35 Sqmm 4000 Mtr. Mtr. Item No 56(a) Lay cable in Duct - 35sqm
M
98 b Exceeding 185 sq.mm but not exceeding 400 sq.mm 500 Mtr. Mtr. ItemNo 56(b) Lay cable in Duct 185-400sq
M
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 124
Short term of Unit for "Item" Section wherein
bidder has to quote his rates
e-Tender S. No.
SOQ Item No.
Description Unit Short Description for "Item"
Section wherein bidder has to
quote his rates
Qty.
99 57 Dismantling of shallow bases ( bottom box) from existing inset type lightfixures & shifting the same to AAI store etc.
600 Nos. Each Item No 57 Disment of Shallow Base
EA
100 58 Dismantling of top assembly of existing inset type light/elevated taxiwaylight/elevated runway edge fixures & shifting the same to AAI store etc.
820 Nos. Each Item No 58 Disment of Top Assembly
EA
101 59 Dismantling of existing elevated runway edge light/taxiway light fixurescomplete in all respect i/c dismenteling of cement concrete padestal of ofsize 0.5 mtr all around CI /MS transformer housing boxes upto maximumheight of 10 cm & removing of CI/MS transformer housig box with the helpof hammer, Jack hammer , chiesel disconectig the cable in side the boxfrom circuit & disposal of debries at a lead of atleast 50 mtrs & making thesurface smooth for recarpeting as required etc. & shifting the same to AAIstore etc.
270 Nos. Each Item No 59 Disment of elevated fitting
EA
Strengthening of Runway at Amritsar Airport. C-Nil, I-Nil, O-Nil 125
Recommended