View
24
Download
0
Category
Preview:
Citation preview
PLTEMP0319 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains
50% recycled content and 15% post consumer waste.
Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041
knoll.com
Tem
plate Price L
ist March 2019
Price ListMarch 2019
Template
Table of Contents
Introduction Knoll and Sustainable Design 2Knoll Color Program Finishes 3Template Fabrics 7Template Specifications 8
Core Structure End Panel 11Mid Panel 13Bases and Base Kick Plate 15Tops 17Full Height Back Kit 21Lower Back Kit 27Upper Back Kit 31Mid Back Kit 39
Inside Back Inserts Full Height Inside Back Inserts 49Lower Inside Back Inserts 55Upper Inside Back Inserts 59Mid Inside Back Inserts 67
Storage Components Drawer Kits 75Sliding Door Kits 77Hinged Door Kits 80Standard and Slotted Shelves 83Coat Rod Shelf 84Worksurface Shelves 85Upper Shelf Kit, 15�h and 20�h, steel 86Shelf Dividers 89
Electrical Components Base Infeed, Base Power Transfer Block, 94Desk-Height Power Modules ( one circuit) 95Desk-Height Power Modules ( two circuits) 96Worksurface Mount Power Modules 97Worksurface Mount Receptacle Block 99Transition Jumpers 100
Worksurfaces and Supports Rectangular Worksurfaces 101Trapezoid Worksurfaces 104120° Worksurfaces 106Support Brackets and Support Legs 107
Accessories Core Structure Accessories 108Drawer Kit Accessories 109Shelf Kit Accessories 110Task Lights 111
Wall Mounting of Knoll Products 112
Alpha-Numeric Index 114
Selling Policy 121
KnollKey Lock Program 123
General Ordering Information 124
Template
PLTEMP10191
Copyright � 2019 Knoll, Inc.All rights reserved.All prices effective 03/15/2019.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. We have also achieved year-over-year increases in the amount of waste diverted from landfills and havecontributed to greenhouse gas emissions reductions through individual site efforts. These initiatives are part of a long-term strategy tofurther reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
2
Initial Cleaning of Markerboards Before First Use:
• Using a clean, dry cloth and a nonabrasive cleaner, gently clean the entire board to loosen any residue
• Using a dry cloth, wipe the entire surface to remove all dirt and residue from the prior step
• Rinse the entire board with clean water
• Using a dry cloth, wipe dry the entire surface
Daily Use, Care and Maintenance:
• Use the proper markers. All dry erase markers will write legibly on the marker board surface, but not all will erase properly due to their composition. Do not use low odor dry erase markers or permanent (indelible) markers. Use of these markers will lead to staining or ghosting, even with regular cleaning.
• Clean the markerboard regularly. It is recommended that markerboards be erased daily using an eraser designated for use with dry erase markers. If the markerboard is used daily, we recommend that a complete cleaning is performed at least 2-3 times a week using EXPO® whiteboard cleaner.
• Remove ghosting. Using EXPO® whiteboard cleaner and a paper towel, wipe the entire surface and let dry. Mix Joy® dishwashing detergent with warm water and apply to the board using a paper towel, then wipe dry with a clean cloth. Repeat as necessary.
• Remove permanent marker. Using a dry erase marker, write on top of the permanent marker, erase with a dry eraser, and then clean with EXPO® whiteboard cleaner.
Proper use and regular cleaning of your markerboard surface is essential for preventing permanent stains and/or ghosting typically associated with dry erase markers. By following the care and use instructions below, you will minimize the possibility of permanent stains and ghosting.
Note: Do not use other painted tiles as markerboards or product damage will occur and the tile warranty will be voided.
Knoll Color Program Finishes Template
3
Knoll Color Program Finishes
Core Paint and Laminate Finishes
OrderCode Color Name Paint Grade
Laminate Grade forworksurface shelves
and cabinet tops Paint Finishes Laminate Finishes2mm Edgeband
Finishes Pull Finishes
611 Beige Mist Metallic P2 • •611T Beige Mist Metallic,
textured P2 •118 Bright White P1 L1* • • • •118T Bright White, textured P1 •112 Brown P1 • •112T Brown, textured P1 •123 Brushed Grey L2 •122 Brushed Sand L2 •143 Classic Oak L2* • •113 Dark Grey P1 • • •113T Dark Grey, textured P1 •128 Fog L2* • •114 Folkstone Grey P1 L1* • • • •114T Folkstone Grey, textured P1 •144 Graphite Pear L2* • •142 Grey Ash L2* • •111 Jet Black P1 L2* • • • •111T Jet Black, textured P1 •139 Light Ash L2* • •701 Markerboard White P3 •124 Medium Cherry L2* • •115 Medium Grey P1 • • •115T Medium Grey, textured P1 •612 Medium Metallic Grey P2 •612T Medium Metallic Grey,
textured P2 •121 Micro Grey L2 •129 Micro Sand L2 •126 Natural Cherry L2* • •125 Natural Maple L2* • •119 Pumice L1* • •116 Sandstone P1 • •116T Sandstone, textured P1 •613 Silver P3 • •Note: Markerboard white finish (701) is available on Template backs only.
L1 and L2 laminate finish grades only apply to cabinet tops and worksurfaceshelves. Perpendicular worksurfaces utilize a single price grade.
*melamine worksurface finish
Custom Paint Color PolicyFor all colors outside the standard palettes for Template storage as definedwithin this price list, Knoll will custom match your specification. Pleasesubmit the request using Knoll’s Custom Finish Planner available onDealer Portal.
Custom colors will be processed at a P2 list price for finishes that are notmetallic, clear or white. Metallic, clear and white finishes will beprocessed at a P3 list price.
Extended lead times may apply to custom paint match selections.
End panels, midpanels, bases, tops
and backsTops Tops
Drawer, slidingdoor and hinge doorfronts, sliding door
tracks
Worksurfaceshelves
Worksurfaceshelves
Drawer, slidingdoor and hinge door
handles
Standard shelves,slotted shelves and
shelf dividersWorksurfaces Worksurfaces
Support column andlegs
Slotted shelfpartitions and base
fillers
Template
4
Knoll Color Program Finishes
Core Paint and Laminate Finishes
OrderCode Color Name Paint Grade
Laminate Grade forworksurface shelves
and cabinet tops Paint Finishes Laminate Finishes2mm Edgeband
Finishes Pull Finishes
117 Soft Grey P1 L1* • • • •117T Soft Grey, textured P1 •127 Walnut L2* • •140 Warm Ash L2* • •141 Whitened Ash L2* • •145 Zebra L2 • •AA Aluminum •AN Nickel •Note: Markerboard white finish (701) is available on Template backs only.
L1 and L2 laminate finish grades only apply to cabinet tops and worksurfaceshelves. Perpendicular worksurfaces utilize a single price grade.
*melamine worksurface finish.
Custom Paint Color PolicyFor all colors outside the standard palettes for Template storage as definedwithin this price list, Knoll will custom match your specification. Pleasesubmit the request using Knoll’s Custom Finish Planner available onDealer Portal.
Custom colors will be processed at a P2 list price for finishes that are notmetallic, clear or white. Metallic, clear and white finishes will beprocessed at a P3 list price.
Extended lead times may apply to custom paint match selections.
End panels, midpanels, bases, tops
and backsTops Tops
Drawer, slidingdoor and hinge doorfronts, sliding door
tracks
Worksurfaceshelves
Worksurfaceshelves
Drawer, slidingdoor and hinge door
handles
Standard shelves,slotted shelves and
shelf dividersWorksurfaces Worksurfaces
Support column andlegs
Slotted shelfpartitions and base
fillers
Glass Finishes
OrderCode Color Name Glass Sliding Door Finishes
GL13 Powder Tempered Glass •GL25 Bronze Tempered Glass •GL35 Grey Tempered Glass •
Template
5
Knoll Color Program Finishes
Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.
Code V1 TECHWOOD
638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey
Code V2 PREMIUM TECHWOOD
647 White Pine640 Ebony642 Grigio
V2 NATURAL VENEER020 Natural Oak038 Rustic Walnut *017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch
Code V3 PREMIUM VENEER
039 Pippy Oak *044 Figured Sycamore
Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersComplementary WoodComplementary SyntheticWood Ply Edge *Synthetic Ply Edge *
* Ply Edge available on Birch (037).
Note:-Veneer finishes are for use as: Tops and inside back inserts, Drawer and hinge door fronts.Standard shelves and worksurface shelves and Worksurfaces.-Synthetic Edge option is available on worksurfaces, only.-Finishes with * are available on worksurfaces only.For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com
Template
6
Template Fabrics
Fabric Options — Available for fabric backs, inside back inserts and worksurfaces privacy screens unless noted otherwise.
Grade 10Annex (W1360)Beacon (W1597)Broadcloth II (W1619)Circuit (W1754)Element (W1077)Growth Spurt (W692)Messa (W20611)Skylark (W1718)Symbolic Detail (W693)Tailor made II (W1610)Twister (W1923)Versatility (W432)
Grade 20Circle Line (W1146)Criss Cross (W305)Delite (K2026)Edo (W2111)Logic (W1318)Main Frame (W1783)Nematic II (W1620)Photon II (W1695)Reflect (W884)
Grade 30Micro (W465)Relay (W1020) *
Grade 40Amplify (W1215)Bandwidth (W1219)Hourglass (K1523)Palladium (W1030)Spellbound (W1030)
Grade 50Presto (K1000)
* Available on worksurface privacyscreens only
The following textiles are availablefor use on Template fabric items.Consult with your Knollrepresentative for pricing:Knoll Hopsack (backs and insideback inserts only)PrestoRicochetTransition
COM (Customer’s Own Material)COM can be applied to Templateproduct on a select basis. Pleaseconsult your Knoll customer servicerepresentative for details on theCOM approval process and testingrequirements.
Pricing for COM fabrics is atGrade 10.
Note: Always contact your Knollcustomer service representative priorto sending any COM (includingpre-approved KnollTextiles) to themanufacturing facility.
Note: All fabric components greaterthan 60� wide may need to have thefabric railroaded (turned90-degrees). This must beconsidered when utilizing apatterned textile.
Template
7
Template SpecificationsPlanning Guideline
Template Planning Guidelines
The following Template planning guidelines are provided to ensure stability of Template storage product.
Different scenarios are:
1) Straight runs without attached worksurface2) Straight runs with perpendicular panel attachment3) Straight runs with attached worksurface4) Straight runs with a Template return
1) Straight runs without attached worksurface:• Template product 64� high and shorter without
drawers do not require additional stabilizing• Template product 64� high and shorter with
drawers must have a counterweight kit whichmatches the size of the base installed under thebottom drawer OR be secured to a fixed wallOR be secured back-to-back to anotherTemplate unit.
• Template product 71� high and 78� high (withor without drawers) must be secured to a fixedwall or secured back-to-back back to anotherTemplate unit.
2) Straight runs with perpendicular panelattachment:• Template product 64� high and shorter without
drawers do not require additional stabilizing• Template product 64� high and shorter with
drawers must have a minimum of 39� (15� plus24�) long run of panel(s) attached to theTemplate unit using a Template panelattachment kit. Panels must be on the sameside as the drawers.
• Template product 71� high and 78� high (withor without drawers) must have a minimum of24� long run of panel(s) attached on both sidesof the Template unit.
Template
8
Template SpecificationsPlanning Guideline
3) Straight runs with perpendicular worksurface(s):• Template products 71� high and shorter without drawers
or with one drawer do not require additional stabilizing.• Template product 71� high and shorter with multiple
drawer kits must have either: additional worksurfacesattached or a counter weight kit attached to the rear of theinverted base or secured to a fixed wall or securedback-to-back.
• Template product 78� high or taller must be secured to afixed wall or secured back-to-back.
4) Straight runs with a Template return:• With a 24� or wider return, Template product 78� high
and shorter does not require additional stabilizing, up to a288� (24ft) long run.
Template
9
Template SpecificationsTemplate Lateral Filing Planning
Template
10
End Panelfor steel top
description w d h pattern no. P1 P2 P3
End Panel, no knockouts 1� 15� 42� BC1EP42NNS $221. $240. $250.1� 15� 50� BC1EP50NNS 233. 258. 270.1� 15� 57� BC1EP57NNS 249. 274. 288.1� 15� 64� BC1EP64NNS 263. 291. 302.1� 15� 71� BC1EP71NNS 281. 308. 321.1� 15� 78� BC1EP78NNS 295. 323. 339.
End Panel, desk ht. knockouts 1� 15� 42� BC1EP42KNS 221. 240. 250.1� 15� 50� BC1EP50KNS 233. 258. 270.1� 15� 57� BC1EP57KNS 249. 275. 288.1� 15� 64� BC1EP64KNS 263. 291. 302.1� 15� 71� BC1EP71KNS 281. 308. 321.1� 15� 78� BC1EP78KNS 295. 323. 338.
End Panel, desk ht.base infeed knockouts
1� 15� 42� BC1EP42KKS 229. 250. 263.1� 15� 50� BC1EP50KKS 245. 270. 281.1� 15� 57� BC1EP57KKS 259. 285. 298.1� 15� 64� BC1EP64KKS 274. 300. 314.1� 15� 71� BC1EP71KKS 292. 320. 336.1� 15� 78� BC1EP78KKS 305. 336. 350.
Order Code
Example:
Specification Information
End panel for steel top may only beutilized with a steel top.
Application Notes
End panels with desk ht. knockoutsinclude two knockouts; one justabove worksurface ht. and one justbelow worksurface ht. Knockoutcovers are available separately tocover unused locations.
End panels with desk ht./baseinfeed knockouts include desk ht.knockouts as well as 3 holes at thebase of the end panel. A center holeprovides access for communicationcables while two outer holes provideaccess for base infeeds.
Grommets and hold plugs areincluded with end panels that havebase infeed knockouts.
Template
11
End Panelfor laminate or veneer top
description w d h pattern no. P1 P2 P3
End Panel, no knockouts 1� 15� 16� BC1EP16NN(L/V) $180. $200. $208.1� 15� 22� BC1EP22NN(L/V) 185. 204. 214.1� 15� 25� BC1EP25NN(L/V) 195. 216. 226.1� 15� 28� BC1EP28NN(L/V) 195. 216. 226.1� 15� 42� BC1EP42NN(L/V) 221. 240. 250.1� 15� 50� BC1EP50NN(L/V) 233. 258. 270.1� 15� 57� BC1EP57NN(L/V) 249. 274. 288.1� 15� 64� BC1EP64NN(L/V) 263. 291. 302.1� 15� 71� BC1EP71NN(L/V) 281. 308. 321.1� 15� 78� BC1EP78NN(L/V) 295. 323. 339.
End Panel, desk ht. knockouts 1� 15� 25� BC1EP25KN(L/V) 195. 216. 224.1� 15� 28� BC1EP28KN(L/V) 195. 216. 224.1� 15� 42� BC1EP42KN(L/V) 221. 240. 250.1� 15� 50� BC1EP50KN(L/V) 233. 258. 270.1� 15� 57� BC1EP57KN(L/V) 249. 275. 288.1� 15� 64� BC1EP64KN(L/V) 263. 291. 302.1� 15� 71� BC1EP71KN(L/V) 281. 308. 321.1� 15� 78� BC1EP78KN(L/V) 295. 323. 338.
End Panel, desk ht./base infeed knockouts
1� 15� 16� BC1EP16NK(L/V) 187. 208. 218.1� 15� 22� BC1EP22NK(L/V) 194. 214. 224.1� 15� 25� BC1EP25KK(L/V) 204. 226. 234.1� 15� 28� BC1EP28KK(L/V) 204. 226. 234.1� 15� 42� BC1EP42KK(L/V) 229. 250. 263.1� 15� 50� BC1EP50KK(L/V) 245. 270. 281.1� 15� 57� BC1EP57KK(L/V) 259. 285. 298.1� 15� 64� BC1EP64KK(L/V) 274. 300. 314.1� 15� 71� BC1EP71KK(L/V) 292. 320. 336.1� 15� 78� BC1EP78KK(L/V) 305. 336. 350.
Order Code
Example:
Specification Information
End panel for laminate or veneer topmay only be utilized with a laminateor veneer top.
Specify L for use with laminate topor V for use with veneer top.
Application Notes
End panels with desk ht. knockoutsinclude two knockouts; one justabove worksurface ht. and one justbelow worksurface ht. Knockoutcovers are available separately tocover unused locations.
Worksurface height end panel (28�)only includes one knockout belowworksurface height.
Antenna height (25�) andworksurface height (28�) end panelsonly include one knock-out belowtop height.
End panels with desk ht./baseinfeed knockouts include desk ht.knockouts as well as a base cutouton the outer face for a base infeed ortransition jumper.
16�h and 22�h end panels areavailable with no knockout or baseinfeed knockouts only. Desk-heightand below desk-height knockoutsare not available in these heights.
Credenza height end panels (22�h)are not available with knockouts.
Grommets and hold plugs areincluded with end panels that havebase infeed knockouts.
16�h and 22�h end panels areavailable with no knockout or baseinfeed knockouts only. Desk-heightand below desk-height knockoutsare not available in these heights.
Template
12
Mid Panelfor steel top
description w d h pattern no. P1 P2 P3
Mid Panel, no knockouts 1� 15� 42� BC1MP42NS $359. $396. $415.1� 15� 50� BC1MP50NS 380. 415. 435.1� 15� 57� BC1MP57NS 393. 435. 455.1� 15� 64� BC1MP64NS 427. 467. 487.1� 15� 71� BC1MP71NS 442. 488. 510.1� 15� 78� BC1MP78NS 456. 502. 525.
Mid Panel, desk ht. knockouts 1� 15� 42� BC1MP42KS 359. 396. 415.1� 15� 50� BC1MP50KS 380. 415. 435.1� 15� 57� BC1MP57KS 393. 435. 455.1� 15� 64� BC1MP64KS 427. 467. 487.1� 15� 71� BC1MP71KS 442. 488. 510.1� 15� 78� BC1MP78KS 456. 502. 525.
Order Code
Example:
Specification Information
Mid panel for steel top may only beutilized with a steel top.
Application Notes
Mid panels with desk ht. knockoutsinclude four knockouts; one justabove worksurface ht. on both sidesand one just below worksurface ht.on both sides. Knockout covers areavailable separately to cover unusedlocations.
Template
13
Mid Panelfor laminate / veneer top
description w d h pattern no. P1 P2 P3
Mid Panel, no knockouts 1� 15� 16� BC1MP16N(L/V) $307. $338. $353.1� 15� 22� BC1MP22N(L/V) 312. 342. 357.1� 15� 25� BC1MP25N(L/V) 313. 343. 359.1� 15� 28� BC1MP28N(L/V) 313. 343. 359.1� 15� 42� BC1MP42N(L/V) 359. 396. 415.1� 15� 50� BC1MP50N(L/V) 380. 415. 435.1� 15� 57� BC1MP57N(L/V) 393. 435. 455.1� 15� 64� BC1MP64N(L/V) 427. 467. 487.1� 15� 71� BC1MP71N(L/V) 442. 487. 510.1� 15� 78� BC1MP78N(L/V) 456. 502. 525.
Mid Panel, desk ht. knockouts 1� 15� 25� BC1MP25K(L/V) 313. 343. 359.1� 15� 28� BC1MP28K(L/V) 313. 343. 359.1� 15� 42� BC1MP42K(L/V) 359. 396. 415.1� 15� 50� BC1MP50K(L/V) 380. 415. 435.1� 15� 57� BC1MP57K(L/V) 393. 435. 455.1� 15� 64� BC1MP64K(L/V) 427. 467. 487.1� 15� 71� BC1MP71K(L/V) 442. 488. 510.1� 15� 78� BC1MP78K(L/V) 456. 502. 525.
Order Code
Example:
Specification Information
Mid panel for laminate or veneer topmay only be utilized with a laminateor veneer top.
Specify L for use with laminate topor V for use with veneer top.
Application Notes
Mid panels with desk ht. knockoutsinclude four knockouts; one justabove worksurface height on bothsides and one just belowworksurface height on both sides.Knockout covers are availableseparately to cover unusedlocations.
Antenna height (25�) andworksurface height (28�) mid panelsonly include two knockouts belowtop height. One on either side.
Credenza height end panels (22�h)are not available with knockouts.
Template
14
Bases and Base Kick PlateWith cover/ with grommet cover/ no cover
description w d h pattern no. P1 P2 P3 V1
Base, with cover 15� 15� 23/8� BC2BASE15E(K) $244. $269. $280. n/a18� 15� 23/8� BC2BASE18E(K) 247. 272. 284. n/a231/2� 15� 23/8� BC2BASE23E(K) 267. 293. 306. n/a24� 15� 23/8� BC2BASE24E(K) 269. 295. 307. n/a291/2� 15� 23/8� BC2BASE29E(K) 292. 320. 337. n/a30� 15� 23/8� BC2BASE30E(K) 293. 320. 337. n/a36� 15� 23/8� BC2BASE36E(K) 337. 370. 386. n/a42� 15� 23/8� BC2BASE42E(K) 359. 396. 414. n/a48� 15� 23/8� BC2BASE48E(K) 372. 407. 425. n/a
Base, with grommet cover,for use with base duplex power block
15� 15� 23/8� BC2BASE15EG(K) 258. 282. 295. n/a18� 15� 23/8� BC2BASE18EG(K) 261. 285. 298. n/a231/2� 15� 23/8� BC2BASE23EG(K) 281. 307. 320. n/a24� 15� 23/8� BC2BASE24EG(K) 282. 308. 321. n/a291/2� 15� 23/8� BC2BASE29EG(K) 306. 337. 350. n/a30� 15� 23/8� BC2BASE30EG(K) 307. 337. 350. n/a36� 15� 23/8� BC2BASE36EG(K) 350. 385. 399. n/a42� 15� 23/8� BC2BASE42EG(K) 376. 412. 429. n/a48� 15� 23/8� BC2BASE48EG(K) 386. 423. 438. n/a
Base, no coverfor use under drawer kits where top is not visible
18� 15� 23/8� BC2BASE18N(K) 184. 203. 212. n/a231/2� 15� 23/8� BC2BASE23N(K) 194. 214. 223. n/a24� 15� 23/8� BC2BASE24N(K) 194. 214. 224. n/a291/2� 15� 23/8� BC2BASE29N(K) 205. 226. 234. n/a30� 15� 23/8� BC2BASE30N(K) 205. 227. 235. n/a36� 15� 23/8� BC2BASE36N(K) 234. 259. 272. n/a42� 15� 23/8� BC2BASE42N(K) 244. 269. 280. n/a48� 15� 23/8� BC2BASE48N(K) 252. 277. 292. n/a
Base kick plate, single 15� 3/4� 23/8� BC1KP15 99. 106. 114. n/a18� 3/4� 23/8� BC1KP18 100. 112. 118. n/a231/2� 3/4� 23/8� BC1KP23 108. 121. 125. n/a24� 3/4� 23/8� BC1KP24 108. 121. 125. n/a291/2� 3/4� 23/8� BC1KP29 117. 125. 129. n/a30� 3/4� 23/8� BC1KP30 117. 126. 130. n/a36� 3/4� 23/8� BC1KP36 121. 130. 139. n/a42� 3/4� 23/8� BC1KP42 124. 139. 145. n/a48� 3/4� 23/8� BC1KP48 129. 145. 151. n/a
Order Code
Example:
Specification Information
Base is available in painted finishonly.
Specify a ‘‘K’’ at the end of a basepattern number and add $20 to thelist price when configuring aTemplate run in a serpentine orback-to-back layout. A hole will beprovided in the back face of thebase to allow access to powerjumpers.
Application Notes
Base with cover includes removablebase top providing easy access tothe base interior.
Base with grommet cover allowspower cord access when pluggingitems into a base duplex powerblock.
Base without cover may be utilizedbelow a drawer kit to save cost asthe top is not required and electricalcomponents will not be seen.
231/2�w and 291/2�w bases aredesigned to position worksurfaceheight cases perpendicular tostandard 24�d and 30�d worksurfaceends for support.
Base kick plate is optional anddesigned to provide a flushappearance to base when belowdrawers or doors or adjacent to fullheight sliding doors.
Template
15
Bases and Base Kick PlateWith cover/ with grommet cover/ no cover
description w d h pattern no. P1 P2 P3 V1
Base knockout coverpkg. of 10
41/4� 1/16� 13/4� BC2BASEKC10 $607. $665. $696. n/a
Base kick plate, package of 6 15� 3/4� 23/8� BC1KP156 309. 338. 355. n/a18� 3/4� 23/8� BC1KP186 320. 353. 369. n/a231/2� 3/4� 23/8� BC1KP236 374. 412. 432. n/a24� 3/4� 23/8� BC1KP246 378. 416. 436. n/a291/2� 3/4� 23/8� BC1KP296 406. 450. 470. n/a30� 3/4� 23/8� BC1KP306 408. 453. 471. n/a36� 3/4� 23/8� BC1KP366 444. 486. 509. n/a42� 3/4� 23/8� BC1KP426 475. 521. 545. n/a48� 3/4� 23/8� BC1KP486 509. 560. 584. n/a
Order Code
Example:
Specification Information
Base is available in painted finishonly.
Specify a ‘‘K’’ at the end of a basepattern number and add $20 to thelist price when configuring aTemplate run in a serpentine orback-to-back layout. A hole will beprovided in the back face of thebase to allow access to powerjumpers.
Application Notes
Base with cover includes removablebase top providing easy access tothe base interior.
Base with grommet cover allowspower cord access when pluggingitems into a base duplex powerblock.
Base without cover may be utilizedbelow a drawer kit to save cost asthe top is not required and electricalcomponents will not be seen.
231/2�w and 291/2�w bases aredesigned to position worksurfaceheight cases perpendicular tostandard 24�d and 30�d worksurfaceends for support.
Base kick plate is optional anddesigned to provide a flushappearance to base when belowdrawers or doors or adjacent to fullheight sliding doors.
Template
16
TopsFull Widthcredenza or worksurface height units
description w d h pattern no. L1 L2 V1 V2 V3
Top, full width 24� 15� 11/4� BC1TOPW1524(L/V) $171. $218. $311. $356. $482.29� 15� 11/4� BC1TOPW1529(L/V) 181. 222. 320. 370. 501.30� 15� 11/4� BC1TOPW1530(L/V) 181. 222. 320. 370. 501.35� 15� 11/4� BC1TOPW1535(L/V) 192. 297. 333. 382. 513.36� 15� 11/4� BC1TOPW1536(L/V) 192. 297. 333. 382. 513.41� 15� 11/4� BC1TOPW1541(L/V) 205. 307. 340. 391. 529.42� 15� 11/4� BC1TOPW1542(L/V) 205. 307. 340. 391. 529.47� 15� 11/4� BC1TOPW1547(L/V) 212. 313. 353. 403. 546.48� 15� 11/4� BC1TOPW1548(L/V) 212. 314. 354. 407. 550.53� 15� 11/4� BC1TOPW1553(L/V) 354. 390. 379. 435. 585.59� 15� 11/4� BC1TOPW1559(L/V) 354. 398. 386. 443. 603.65� 15� 11/4� BC1TOPW1565(L/V) 379. 539. 396. 457. 615.70� 15� 11/4� BC1TOPW1570(L/V) 380. 542. 403. 467. 629.71� 15� 11/4� BC1TOPW1571(L/V) 380. 542. 407. 468. 631.76� 15� 11/4� BC1TOPW1576(L/V) 398. 553. 415. 479. 644.77� 15� 11/4� BC1TOPW1577(L/V) 398. 553. 417. 480. 648.82� 15� 11/4� BC1TOPW1582(L/V) 398. 557. 428. 489. 659.83� 15� 11/4� BC1TOPW1583(L/V) 398. 557. 429. 490. 662.88� 15� 11/4� BC1TOPW1588(L/V) 428. 560. 436. 501. 673.89� 15� 11/4� BC1TOPW1589(L/V) 429. 560. 437. 502. 679.94� 15� 11/4� BC1TOPW1594(L/V) 436. 566. 445. 512. 692.95� 15� 11/4� BC1TOPW1595(L/V) 437. 566. 447. 516. 696.
Order Code
Example:
Specification Information
L1 finishes include:
114 - Folkstone Grey117 - Soft Grey118 - Bright White119 - Pumice
L2 finishes include all otherstandard Knoll core laminatefinishes.
Application Notes
Tops for credenza or worksurfaceheight units are available in 11/4�thick laminate or veneer only.
Full top widths are computed bytaking the nominal full width ofsingle or connected units andsubtracting 1� for each mid panelutilized.
Example:72�w unit comprises of two 36�wsections (one mid panel) wouldutilize a 71�w top.
72�w unit comprised of three 24�wsections (two mid panels) wouldutilize a 70�w top.
Due to the large number of unitcombinations possible, only themost common sizes are available asstandard product.
Template
17
TopsFull Width42�h to 78�h units
description w d h pattern no. P1 P2 P3 L1 L2 V1 V2 V3
Top, full width 24� 15� 11/16� BC1TOP1524(S/L/V) $181. $200. $208. $181. $229. $339. $389. $526.29� 15� 11/16� BC1TOP1529(L/V) 189. 233. 350. 402. 544.30� 15� 11/16� BC1TOP1530(S/L/V) 189. 211. 222. 189. 233. 350. 402. 544.35� 15� 11/16� BC1TOP1535(L/V) 203. 312. 359. 415. 560.36� 15� 11/16� BC1TOP1536(S/L/V) 203. 224. 233. 203. 312. 359. 415. 560.41� 15� 11/16� BC1TOP1541(L/V) 216. 323. 372. 428. 576.42� 15� 11/16� BC1TOP1542(S/L/V) 216. 235. 247. 216. 323. 372. 428. 576.47� 15� 11/16� BC1TOP1547(S/L/V) 366. 401. 420. 224. 333. 385. 439. 597.48� 15� 11/16� BC1TOP1548(S/L/V) 224. 246. 258. 224. 333. 386. 443. 601.53� 15� 11/16� BC1TOP1553(S/L/V) 373. 410. 428. 373. 410. 412. 475. 637.59� 15� 11/16� BC1TOP1559(S/L/V) 373. 410. 429. 373. 420. 420. 485. 655.59� 15� 11/16� BC1TOP1560P(S/L/V) 373. 410. 429. 373. 420. 420. 485. 655.65� 15� 11/16� BC1TOP1565(S/L/V) 393. 434. 458. 393. 564. 433. 497. 671.70� 15� 11/16� BC1TOP1570(S/L/V) 396. 435. 458. 396. 569. 439. 510. 686.71� 15� 11/16� BC1TOP1571(S/L/V) 396. 435. 458. 396. 569. 443. 511. 688.71� 15� 11/16� BC1TOP1572P(S/L/V) 396. 435. 458. 396. 569. 445. 512. 690.76� 15� 11/16� BC1TOP1576(L/V) 417. 578. 454. 520. 700.77� 15� 11/16� BC1TOP1577(S/L/V) 417. 462. 482. 417. 578. 456. 522. 706.82� 15� 11/16� BC1TOP1582(L/V) 417. 583. 465. 532. 719.83� 15� 11/16� BC1TOP1583(S/L/V) 417. 462. 482. 417. 583. 466. 536. 722.88� 15� 11/16� BC1TOP1588(L/V) 447. 586. 476. 544. 734.89� 15� 11/16� BC1TOP1589(L/V) 448. 586. 477. 545. 739.94� 15� 11/16� BC1TOP1594(L/V) 460. 593. 486. 559. 756.95� 15� 11/16� BC1TOP1595(L/V) 460. 593. 488. 563. 760.
Order Code
Example:
Specification Information
L1 finishes include:
114 - Folkstone Grey117 - Soft Grey118 - Bright White119 - Pumice
L2 finishes include all otherstandard Knoll core laminatefinishes.
Painted steel top include top trimpanel to provide a smoothappearance to the underside of thetop.
Tops for 42� - 78� high units are notrouted to work with locking drawerkits and are not to be used on units28� and shorter.
Application Notes
Tops for 42�h to 78�h units areavailable in 11/16� thickness tomatch standard shelf thickness.
Full top widths are computed bytaking the nominal full width ofsingle or connected units andsubtracting 1� for each mid panelutilized.
Due to the large number of unitcombinations possible, only themost common sizes are available asstandard product.
72P top is a nominal 71�w topspecifically designed for use withthe 72�w upper shelf kits. It will notwork with any other 72�wcombination.
60P top is a nominal 59�w topspecifically designed for use above60�w upper shelf kits. It will notwork with any other 60�wcombination.
Steel tops include finished topinsert panel. Steel top sizescorrespond to the following sizeconfigurations only:47�= two 24� sections53�= one 24� and one 30� section59�= two 30� sections65�= one 30� and one 36� section70�= three 24� sections71�= one 24� and one 48� section72�= for 72�w pre-configured only77�= one 30� and one 48� section82�= one 24� and two 30� sections83�= one 36� and one 48� section
Template
18
TopsEnd Position / Mid Positioncredenza or worksurface height units
description wactualw d h pattern no. L1 L2 V1 V2 V3
Top, end position 18� 171/2� 15� 11/4� BC1ETOPW1518(L/V) $165. $172. $297. $341. $462.24� 231/2� 15� 11/4� BC1ETOPW1524(L/V) 175. 183. 310. 355. 481.30� 291/2� 15� 11/4� BC1ETOPW1530(L/V) 185. 223. 319. 366. 496.36� 351/2� 15� 11/4� BC1ETOPW1536(L/V) 200. 301. 332. 380. 511.42� 411/2� 15� 11/4� BC1ETOPW1542(L/V) 209. 307. 340. 391. 529.48� 471/2� 15� 11/4� BC1ETOPW1548(L/V) 215. 314. 354. 407. 550.
Top, mid position 24� 23� 15� 11/4� BC1MTOPW1524(L/V) 175. 183. 310. 355. 481.30� 29� 15� 11/4� BC1MTOPW1530(L/V) 185. 223. 317. 363. 494.36� 35� 15� 11/4� BC1MTOPW1536(L/V) 200. 300. 332. 380. 511.42� 41� 15� 11/4� BC1MTOPW1542(L/V) 209. 307. 339. 390. 528.48� 47� 15� 11/4� BC1MTOPW1548(L/V) 215. 313. 353. 403. 546.
Order Code
Example:
Specification Informatin
L1 finishes include:
114 - Folkstone Grey117 - Soft Grey118 - Bright White119 - Pumice
L2 finishes include all otherstandard Knoll core laminatefinishes.
Application Notes
Tops for credenza or worksurfaceheight units are available in 11/4�thick laminate or veneer only.
End and mid position tops aredesigned to cover single Templatesection widths occuring at either theend or middle of a run.
End position tops are actual widthminus1/2� to butt up against a midposition top or another end positiontop.
Mid position tops are actual widthminus 1� to butt up against adjacentend/mid position tops.
Template
19
TopsEnd Position / Mid Position42�h to 78�h units
description wactualw d h pattern no. P1 P2 P3 L1 L2 V1 V2 V3
Top, end position 15� 141/2� 15� 11/16� BC1ETOP1515(S/L/V) $170. $185. $194. $170. $179. $358. $413. $558.18� 171/2� 15� 11/16� BC1ETOP1518(S/L/V) 175. 191. 201. 175. 184. 366. 420. 569.24� 231/2� 15� 11/16� BC1ETOP1524(S/L/V) 185. 203. 214. 185. 194. 383. 438. 592.30� 291/2� 15� 11/16� BC1ETOP1530(S/L/V) 195. 218. 226. 195. 234. 397. 459. 615.36� 351/2� 15� 11/16� BC1ETOP1536(S/L/V) 208. 228. 237. 208. 315. 412. 475. 637.42� 411/2� 15� 11/16� BC1ETOP1542(S/L/V) 219. 238. 250. 219. 321. 425. 489. 660.48� 471/2� 15� 11/16� BC1ETOP1548(S/L/V) 227. 248. 260. 227. 333. 443. 511. 688.59� 581/2� 15� 11/16� BC1ETOP1560P(S/L/V) 354. 390. 407. 354. 560. 506. 539. 555.71� 701/2� 15� 11/16� BC1ETOP1572P(S/L/V) 360. 397. 415. 360. 568. 512. 544. 564.
Top, mid position 15� 14� 15� 11/16� BC1MTOP1515(S/L/V) 170. 185. 194. 170. 179. 358. 413. 558.18� 17� 15� 11/16� BC1MTOP1518(S/L/V) 175. 191. 201. 175. 184. 366. 420. 569.24� 23� 15� 11/16� BC1MTOP1524(S/L/V) 185. 203. 214. 185. 194. 382. 437. 591.30� 29� 15� 11/16� BC1MTOP1530(S/L/V) 195. 218. 226. 195. 233. 396. 458. 614.36� 35� 15� 11/16� BC1MTOP1536(S/L/V) 208. 228. 237. 208. 314. 410. 473. 635.42� 41� 15� 11/16� BC1MTOP1542(S/L/V) 219. 238. 250. 219. 321. 424. 488. 659.48� 47� 15� 11/16� BC1MTOP1548(S/L/V) 227. 248. 260. 227. 333. 439. 510. 686.59� 58� 15� 11/16� BC1MTOP1560P(S/L/V) 354. 390. 407. 354. 560. 506. 539. 555.71� 70� 15� 11/16� BC1MTOP1572P(S/L/V) 360. 397. 415. 360. 568. 512. 544. 564.
Order Code
Example:
Specification Information
L1 finishes include:
114 - Folkstone Grey117 - Soft Grey118 - Bright White119 - Pumice
L2 finishes include all otherstandard Knoll core laminatefinishes.
Painted steel tops include top trimpanel to provide a smoothappearance to the underside of thetop.
Tops for 42� - 78� high units are notrouted to work with locking drawerkits and are not to be used on units28� and shorter.
Application Notes
Tops for 42�h to 78�h units areavailable in 11/16� thickness tomatch standard shelf thickness.
End and mid position tops aredesigned to cover single Templatesection widths occuring at either theend or middle of a run.
End position tops are actual widthminus1/2� to butt up against a midposition top or another end positiontop.
Mid position tops are actual widthminus 1� to butt up against adjacentend/mid position tops.
72P top is a nominal 71�w topspecifically designed for use withthe 72�w upper shelf kits. It will notwork with any other 72�wcombination.
60P top is a nominal 59�w topspecifically designed for use above60�w upper shelf kits. It will notwork with any other 60�wcombination.
Template
20
Full Height Back Kit16�h to 50�h painted
description w d h pattern no. P1 P2 P3
16�h full height back kit, painted 18� 16� BB2FBK1618P $180. $197. $205.24� 16� BB2FBK1624P 185. 205. 216.30� 16� BB2FBK1630P 189. 214. 222.36� 16� BB2FBK1636P 200. 221. 228.42� 16� BB2FBK1642P 204. 226. 234.48� 16� BB2FBK1648P 211. 233. 244.
22�h full height back kit, painted 18� 22� BB2FBK2218P 185. 203. 212.24� 22� BB2FBK2224P 189. 211. 222.30� 22� BB2FBK2230P 197. 219. 227.36� 22� BB2FBK2236P 204. 224. 233.42� 22� BB2FBK2242P 211. 231. 240.48� 22� BB2FBK2248P 218. 237. 248.
25�h Antenna full height back kit, painted 18� 25� BB2FBK2518P 188. 210. 219.24� 25� BB2FBK2524P 200. 219. 228.30� 25� BB2FBK2530P 208. 228. 237.36� 25� BB2FBK2536P 216. 235. 247.42� 25� BB2FBK2542P 223. 246. 255.48� 25� BB2FBK2548P 231. 254. 267.
28�h full height back kit, painted 18� 28� BB2FBK2818P 188. 210. 219.231/2� 28� BB2FBK2823P 200. 219. 228.24� 28� BB2FBK2824P 200. 219. 228.291/2� 28� BB2FBK2829P 208. 228. 237.30� 28� BB2FBK2830P 208. 228. 237.36� 28� BB2FBK2836P 216. 235. 247.42� 28� BB2FBK2842P 223. 246. 255.48� 28� BB2FBK2848P 231. 254. 267.
42�h full height back kit, painted 15� 42� BB2FBK4215P 234. 258. 270.18� 42� BB2FBK4218P 234. 258. 270.24� 42� BB2FBK4224P 254. 280. 293.30� 42� BB2FBK4230P 275. 302. 315.36� 42� BB2FBK4236P 296. 326. 340.42� 42� BB2FBK4242P 315. 347. 361.48� 42� BB2FBK4248P 337. 370. 387.
Order Code
Example:
Specification Information
Add a ‘‘GL’’ (left grommet position)or ‘‘GR’’ (right grommet position)plus $40 list to any width 28�hpainted back for access to acorresponding below worksurfaceknockout in adjacent end or midpanel.
Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
Back grommets for 28�h paintedbacks designed to be used withworksurface mounted electricalcomponents listed on pages 97-99.
Template
21
Full Height Back Kit16�h to 50�h painted
description w d h pattern no. P1 P2 P3
50�h full height back kit, painted 15� 50� BB2FBK5015P $234. $259. $272.18� 50� BB2FBK5018P 234. 259. 272.24� 50� BB2FBK5024P 255. 281. 295.30� 50� BB2FBK5030P 276. 302. 317.36� 50� BB2FBK5036P 297. 327. 341.42� 50� BB2FBK5042P 317. 349. 363.48� 50� BB2FBK5048P 338. 372. 389.
Order Code
Example:
Specification Information
Add a ‘‘GL’’ (left grommet position)or ‘‘GR’’ (right grommet position)plus $40 list to any width 28�hpainted back for access to acorresponding below worksurfaceknockout in adjacent end or midpanel.
Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
Back grommets for 28�h paintedbacks designed to be used withworksurface mounted electricalcomponents listed on pages 97-99.
Template
22
Full Height Back Kit57�h to 78� h painted
description w d h pattern no. P1 P2 P3
57�h full height back kit, painted 15� 57� BB2FBK5715P $185. $204. $214.18� 57� BB2FBK5718P 235. 259. 272.24� 57� BB2FBK5724P 258. 282. 296.30� 57� BB2FBK5730P 277. 305. 319.36� 57� BB2FBK5736P 298. 330. 342.42� 57� BB2FBK5742P 319. 350. 365.48� 57� BB2FBK5748P 340. 374. 390.
64�h full height back kit, painted 15� 64� BB2FBK6415P 186. 205. 216.18� 64� BB2FBK6418P 235. 260. 273.24� 64� BB2FBK6424P 250. 276. 291.30� 64� BB2FBK6430P 273. 298. 313.36� 64� BB2FBK6436P 293. 321. 338.42� 64� BB2FBK6442P 313. 345. 359.48� 64� BB2FBK6448P 337. 369. 386.
71�h full height back kit, painted 15� 71� BB2FBK7115P 356. 392. 412.18� 71� BB2FBK7118P 387. 425. 445.24� 71� BB2FBK7124P 413. 456. 476.30� 71� BB2FBK7130P 436. 482. 505.36� 71� BB2FBK7136P 464. 510. 531.42� 71� BB2FBK7142P 488. 537. 560.48� 71� BB2FBK7148P 513. 566. 588.
78�h full height back kit, painted 18� 78� BB2FBK7818P 392. 433. 454.24� 78� BB2FBK7824P 420. 465. 485.30� 78� BB2FBK7830P 450. 492. 516.36� 78� BB2FBK7836P 477. 526. 546.42� 78� BB2FBK7842P 506. 555. 582.48� 78� BB2FBK7848P 531. 585. 612.
Order Code
Example:
Specification Information Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
71�h and 78�h backs are segmenteddue to their size. Pattern numberincludes two back sections; onebottom position back approximately15�h to line up with the top of abottom file drawer and one topposition back to cover the remainingheight.
Template
23
Full Height Back Kit16�h to 50�h fabric
description w d h pattern no. 10 20 30 40
16�h full height back kit, fabric 18� 1/2� 16� BB2FBK1618F $307. $335. $349. $359.24� 1/2� 16� BB2FBK1624F 323. 349. 366. 379.30� 1/2� 16� BB2FBK1630F 335. 358. 376. 390.36� 1/2� 16� BB2FBK1636F 363. 393. 413. 428.42� 1/2� 16� BB2FBK1642F 374. 402. 423. 436.48� 1/2� 16� BB2FBK1648F 386. 416. 436. 454.
22�h full height back kit, fabric 18� 1/2� 22� BB2FBK2218F 313. 339. 354. 366.24� 1/2� 22� BB2FBK2224F 332. 354. 373. 385.30� 1/2� 22� BB2FBK2230F 339. 363. 382. 396.36� 1/2� 22� BB2FBK2236F 372. 399. 417. 433.42� 1/2� 22� BB2FBK2242F 380. 410. 429. 443.48� 1/2� 22� BB2FBK2248F 391. 423. 443. 460.
25�h Antenna full height back kit, fabric 18� 1/2� 25� BB2FBK2518F 326. 350. 366. 380.24� 1/2� 25� BB2FBK2524F 347. 374. 391. 405.30� 1/2� 25� BB2FBK2530F 358. 387. 403. 418.36� 1/2� 25� BB2FBK2536F 397. 429. 450. 466.42� 1/2� 25� BB2FBK2542F 412. 443. 465. 481.48� 1/2� 25� BB2FBK2548F 425. 461. 482. 497.
28�h full height back kit, fabric 18� 1/2� 28� BB2FBK2818F 326. 350. 366. 380.231/2� 1/2� 28� BB2FBK2823F 347. 374. 391. 405.24� 1/2� 28� BB2FBK2824F 347. 374. 391. 405.291/2� 1/2� 28� BB2FBK2829F 358. 387. 403. 418.30� 1/2� 28� BB2FBK2830F 358. 387. 403. 418.36� 1/2� 28� BB2FBK2836F 397. 429. 450. 466.42� 1/2� 28� BB2FBK2842F 412. 443. 465. 481.48� 1/2� 28� BB2FBK2848F 425. 461. 482. 497.
42�h full height back kit, fabric 15� 1/2� 42� BB2FBK4215F 382. 413. 432. 447.18� 1/2� 42� BB2FBK4218F 382. 413. 432. 447.24� 1/2� 42� BB2FBK4224F 423. 459. 479. 494.30� 1/2� 42� BB2FBK4230F 453. 486. 511. 528.36� 1/2� 42� BB2FBK4236F 517. 559. 584. 606.42� 1/2� 42� BB2FBK4242F 542. 586. 613. 634.48� 1/2� 42� BB2FBK4248F 572. 616. 648. 666.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
Fabric backs consist of two pieces;an inset metal back that is visiblefrom the inside of the unit and a1/2�thick fabric insert that mounts to theback side of the metal back.
Template
24
Full Height Back Kit16�h to 50�h fabric
description w d h pattern no. 10 20 30 40
50�h full height back kit, fabric 15� 1/2� 50� BB2FBK5015F $392. $424. $443. $461.18� 1/2� 50� BB2FBK5018F 392. 424. 443. 461.24� 1/2� 50� BB2FBK5024F 435. 473. 492. 511.30� 1/2� 50� BB2FBK5030F 465. 501. 526. 543.36� 1/2� 50� BB2FBK5036F 541. 585. 612. 633.42� 1/2� 50� BB2FBK5042F 570. 615. 644. 665.48� 1/2� 50� BB2FBK5048F 601. 648. 675. 699.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
Fabric backs consist of two pieces;an inset metal back that is visiblefrom the inside of the unit and a1/2�thick fabric insert that mounts to theback side of the metal back.
Template
25
Full Height Back Kit57�h to 78�h fabric
description w d h pattern no. 10 20 30 40
57�h full height back kit, fabric 15� 1/2� 57� BB2FBK5715F $339. $363. $382. $393.18� 1/2� 57� BB2FBK5718F 399. 433. 454. 468.24� 1/2� 57� BB2FBK5724F 450. 486. 510. 527.30� 1/2� 57� BB2FBK5730F 482. 520. 543. 564.36� 1/2� 57� BB2FBK5736F 566. 610. 637. 660.42� 1/2� 57� BB2FBK5742F 597. 644. 672. 697.48� 1/2� 57� BB2FBK5748F 625. 674. 708. 731.
64�h full height back kit, fabric 15� 1/2� 64� BB2FBK6415F 345. 373. 390. 402.18� 1/2� 64� BB2FBK6418F 413. 445. 466. 482.24� 1/2� 64� BB2FBK6424F 459. 492. 517. 536.30� 1/2� 64� BB2FBK6430F 489. 528. 554. 572.36� 1/2� 64� BB2FBK6436F 583. 630. 657. 681.42� 1/2� 64� BB2FBK6442F 613. 663. 692. 717.48� 1/2� 64� BB2FBK6448F 650. 700. 733. 761.
71�h full height back kit, fabric 15� 1/2� 71� BB2FBK7115F 516. 558. 584. 606.18� 1/2� 71� BB2FBK7118F 566. 609. 635. 660.24� 1/2� 71� BB2FBK7124F 625. 674. 707. 731.30� 1/2� 71� BB2FBK7130F 663. 716. 750. 776.36� 1/2� 71� BB2FBK7136F 770. 832. 869. 898.42� 1/2� 71� BB2FBK7142F 807. 873. 911. 944.48� 1/2� 71� BB2FBK7148F 847. 915. 956. 991.
78�h full height back kit, fabric 18� 1/2� 78� BB2FBK7818F 578. 625. 654. 675.24� 1/2� 78� BB2FBK7824F 649. 698. 731. 758.30� 1/2� 78� BB2FBK7830F 687. 743. 776. 805.36� 1/2� 78� BB2FBK7836F 805. 869. 909. 944.42� 1/2� 78� BB2FBK7842F 846. 914. 954. 990.48� 1/2� 78� BB2FBK7848F 891. 962. 1,005. 1,044.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Full backs cover sections from thebase to the underside of a top.
22�h and 28�h full back kits arealso utilized under worksurfaceshelves when there is either areversal or pass-through abovecredenza or worksurface height.
15�w full backs are only availableon units 57�h to 71�h.
Fabric backs consist of two pieces;an inset metal back that is visiblefrom the inside of the unit and a1/2�thick fabric insert that mounts to theback side of the metal back.
71�h and 78�h backs are segmenteddue to their size. Pattern numberincludes two back sections; onebottom position back approximately15�h to line up with the top of abottom file drawer and one topposition back to cover the remainingheight.
Template
26
Lower Back Kit42�h, 44�h and 49�h painted
description w d h pattern no. P1 P2 P3
42�h lower back kit, paintedFor use on 57�h unit with 15�h toppass-through or reversed storage
18� 42� BB2LBK4218P $249. $275. $289.24� 42� BB2LBK4224P 273. 298. 312.30� 42� BB2LBK4230P 293. 321. 338.36� 42� BB2LBK4236P 314. 345. 360.42� 42� BB2LBK4242P 337. 370. 386.48� 42� BB2LBK4248P 355. 391. 410.
44�h lower back kit, paintedFor use on 64�h unit with 20�h toppass-through or reversed storage
18� 44� BB2LBK4418P 249. 275. 289.24� 44� BB2LBK4424P 273. 298. 312.30� 44� BB2LBK4430P 293. 321. 338.36� 44� BB2LBK4436P 314. 345. 360.42� 44� BB2LBK4442P 337. 370. 386.48� 44� BB2LBK4448P 356. 392. 412.
49�h lower back kit, paintedFor use on 64�h unit with 15�h toppass-through or reversed storage
18� 49� BB2LBK4918P 250. 276. 289.24� 49� BB2LBK4924P 273. 299. 313.30� 49� BB2LBK4930P 295. 323. 339.36� 49� BB2LBK4936P 315. 347. 361.42� 49� BB2LBK4942P 338. 372. 387.48� 49� BB2LBK4948P 356. 393. 413.
Order Code
Example:
Specification Information Applicaiton Notes
Lower back covers a section fromthe base to a shelf height positionedto match either a 15�h or 20�hstandard top position storageopening or pass-through.
Lower back includes a spacer barthat fills the step created where theback meets a standard shelf.
Lower backs are not offered in 22�or 28� heights as a full back isalways utilized at those heights.The flush nature of theworksurface shelf utilized atthose heights negates the needfor a lower back with spacer.
Template
27
Lower Back Kit51�h, 56�h and 58�h painted
description w d h pattern no. P1 P2 P3
51�h lower back kit, paintedFor use on 71�h unit with 20�h toppass-through or reversed storage
18� 51� BB2LBK5118P $248. $274. $285.24� 51� BB2LBK5124P 270. 296. 308.30� 51� BB2LBK5130P 289. 317. 333.36� 51� BB2LBK5136P 308. 340. 355.42� 51� BB2LBK5142P 332. 360. 379.48� 51� BB2LBK5148P 349. 385. 401.
56�h lower back kit, paintedFor use on 71�h unit with 15�h toppass-through or reversed storage
18� 56� BB2LBK5618P 250. 276. 291.24� 56� BB2LBK5624P 274. 299. 314.30� 56� BB2LBK5630P 296. 326. 340.36� 56� BB2LBK5636P 315. 349. 363.42� 56� BB2LBK5642P 339. 373. 390.48� 56� BB2LBK5648P 359. 396. 414.
58�h lower back kit, paintedFor use on 78�h unit with 20�h toppass-through or reversed storage
18� 58� BB2LBK5818P 250. 276. 291.24� 58� BB2LBK5824P 274. 300. 314.30� 58� BB2LBK5830P 296. 326. 340.36� 58� BB2LBK5836P 317. 349. 363.42� 58� BB2LBK5842P 339. 373. 390.48� 58� BB2LBK5848P 359. 396. 414.
Order Code
Example:
Specification Information Application Notes
Lower back covers a section fromthe base to a shelf height positionedto match either a 15�h or 20�hstandard top position storageopening or pass-through.
Lower back includes a spacer barthat fills the step created where theback meets a standard shelf.
Lower backs are not offered in 22�or 28� heights as a full back isalways utilized at those heights.The flush nature of theworksurface shelf utilized atthose heights negates the needfor a lower back with spacer.
Template
28
Lower Back Kit42�h, 44�h and 49�h fabric
description w d h pattern no. 10 20 30 40
42�h lower back kit, fabricFor use on 57�h unit with 15�h toppass-through or reversed storage
18� 42� BB2LBK4218F $397. $431. $450. $466.24� 42� BB2LBK4224F 437. 476. 494. 513.30� 42� BB2LBK4230F 467. 508. 529. 545.36� 42� BB2LBK4236F 536. 578. 606. 628.42� 42� BB2LBK4242F 563. 608. 634. 657.48� 42� BB2LBK4248F 589. 637. 666. 691.
44�h lower back kit, fabricFor use on 64�h unit with 20�h toppass-through or reversed storage
18� 44� BB2LBK4418F 401. 433. 456. 469.24� 44� BB2LBK4424F 443. 480. 501. 519.30� 44� BB2LBK4430F 475. 511. 532. 554.36� 44� BB2LBK4436F 542. 586. 613. 634.42� 44� BB2LBK4442F 569. 614. 644. 665.48� 44� BB2LBK4448F 601. 649. 675. 699.
49�h lower back kit, fabricFor use on 64�h unit with 15�h toppass-through or reversed storage
18� 49� BB2LBK4918F 407. 438. 462. 479.24� 49� BB2LBK4924F 454. 488. 512. 529.30� 49� BB2LBK4930F 482. 520. 543. 564.36� 49� BB2LBK4936F 559. 606. 632. 655.42� 49� BB2LBK4942F 587. 634. 664. 688.48� 49� BB2LBK4948F 616. 666. 698. 723.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Lower back covers a section fromthe base to a shelf height positionedto match either a 15�h or 20�hstandard top position storageopening or pass-through.
Lower back includes a spacer barthat fills the step created where theback meets a standard shelf.
Lower backs are not offered in 22�or 28� heights as a full back isalways utilized at those heights.The flush nature of theworksurface shelf utilized atthose heights negates the needfor a lower back with spacer.
The 11/16�h spacer bar is availablepainted only and will be visible ontop of a fabric lower back as it isdesigned to be an extension of thesteel shelf behind it.
Template
29
Lower Back Kit51�h, 56�h and 58�h fabric
description w d h pattern no. 10 20 30 40
51�h lower back kit, fabricFor use on 71�h unit with 20�h toppass-through or reversed storage
18� 51� BB2LBK5118F $405. $437. $461. $477.24� 51� BB2LBK5124F 456. 489. 513. 530.30� 51� BB2LBK5130F 482. 520. 543. 564.36� 51� BB2LBK5136F 560. 606. 632. 655.42� 51� BB2LBK5142F 587. 634. 664. 688.48� 51� BB2LBK5148F 617. 668. 699. 723.
56�h lower back kit, fabricFor use on 71�h unit with 15�h toppass-through or reversed storage
18� 56� BB2LBK5618F 416. 450. 469. 488.24� 56� BB2LBK5624F 466. 505. 527. 544.30� 56� BB2LBK5630F 497. 539. 564. 583.36� 56� BB2LBK5636F 584. 630. 659. 683.42� 56� BB2LBK5642F 614. 664. 695. 719.48� 56� BB2LBK5648F 648. 697. 730. 757.
58�h lower back kit, fabricFor use on 78�h unit with 20�h toppass-through or reversed storage
18� 58� BB2LBK5818F 416. 453. 473. 488.24� 58� BB2LBK5824F 467. 506. 528. 545.30� 58� BB2LBK5830F 500. 540. 566. 584.36� 58� BB2LBK5836F 585. 632. 660. 685.42� 58� BB2LBK5842F 615. 665. 696. 721.48� 58� BB2LBK5848F 650. 699. 732. 761.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Lower back covers a section fromthe base to a shelf height positionedto match either a 15�h or 20�hstandard top position storageopening or pass-through.
Lower back includes a spacer barthat fills the step created where theback meets a standard shelf.
Lower backs are not offered in 22�or 28� heights as a full back isalways utilized at those heights.The flush nature of theworksurface shelf utilized atthose heights negates the needfor a lower back with spacer.
The 11/16�h spacer bar is availablepainted only and will be visible ontop of a fabric lower back as it isdesigned to be an extension of thesteel shelf behind it.
Template
30
Upper Back Kit14�h, 15�h, 20�h and 22�h painted
description w d h pattern no. P1 P2 P3
14�h upper back kit, paintedFor use on 42�h unit with reversal at worksurfaceheight (not compatible with 15�h doorcomponents)
18� 14� BB1UBK1418P $184. $202. $211.24� 14� BB1UBK1424P 187. 205. 218.30� 14� BB1UBK1430P 191. 212. 222.36� 14� BB1UBK1436P 197. 218. 226.42� 14� BB1UBK1442P 202. 222. 231.48� 14� BB1UBK1448P 205. 226. 234.
15�h upper back kit, paintedFor use on 57�h and taller units with pass throughor reversed shelf storage below (compatible withall 15�h door kits)
18� 15� BB1UBK1518P 194. 214. 224.24� 15� BB1UBK1524P 203. 223. 232.30� 15� BB1UBK1530P 211. 231. 240.36� 15� BB1UBK1536P 221. 238. 250.42� 15� BB1UBK1542P 227. 249. 260.48� 15� BB1UBK1548P 234. 259. 272.60� 15� BB1UBK1560P 249. 274. 285.72� 15� BB1UBK1572P 258. 281. 293.
20�h upper back kit, paintedFor use on 57�h and taller units with pass throughor reversed shelf storage below (compatible withall 20�h door kits)
18� 20� BB1UBK2018P 194. 214. 224.24� 20� BB1UBK2024P 203. 224. 232.30� 20� BB1UBK2030P 212. 232. 244.36� 20� BB1UBK2036P 221. 240. 252.42� 20� BB1UBK2042P 228. 249. 261.48� 20� BB1UBK2048P 235. 260. 273.60� 20� BB1UBK2060P 267. 291. 300.72� 20� BB1UBK2072P 274. 297. 308.
22�h upper back kit, paintedFor use on 50� unit reversal at worksurface height
18� 22� BB1UBK2218P 194. 214. 224.24� 22� BB1UBK2224P 203. 224. 233.30� 22� BB1UBK2230P 212. 232. 244.36� 22� BB1UBK2236P 221. 240. 252.42� 22� BB1UBK2242P 228. 249. 261.48� 22� BB1UBK2248P 235. 260. 273.
Order Code
Example:
Specification Information Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
60�w and 72�w upper back kits arerequired with all 60�w and 72�wupper shelf kits.
Template
31
Upper Back Kit28�h, 29�h, 35�h and 36�h painted
description w d h pattern no. P1 P2 P3
28�h upper back kit, paintedFor use on 50�h unit with reversal at credenzaheight
18� 28� BB1UBK2818P $212. $233. $245.24� 28� BB1UBK2824P 228. 249. 261.30� 28� BB1UBK2830P 244. 267. 277.36� 28� BB1UBK2836P 258. 284. 296.42� 28� BB1UBK2842P 273. 299. 313.48� 28� BB1UBK2848P 289. 315. 333.
29�h upper back kit, paintedFor use on 57�h unit with reversal at worksurfaceheight
18� 29� BB1UBK2918P 212. 233. 245.24� 29� BB1UBK2924P 228. 249. 261.30� 29� BB1UBK2930P 244. 267. 277.36� 29� BB1UBK2936P 258. 284. 296.42� 29� BB1UBK2942P 273. 299. 313.48� 29� BB1UBK2948P 289. 315. 333.
35�h upper back kit, paintedFor use on 57�h unit with reversal at credenzaheight
18� 35� BB1UBK3518P 214. 233. 245.24� 35� BB1UBK3524P 228. 250. 261.30� 35� BB1UBK3530P 245. 269. 280.36� 35� BB1UBK3536P 259. 285. 297.42� 35� BB1UBK3542P 274. 300. 314.48� 35� BB1UBK3548P 291. 319. 335.
36�h upper back kit, paintedFor use on 64�h unit with reversal at worksurfaceheight
18� 36� BB1UBK3618P 214. 233. 245.24� 36� BB1UBK3624P 228. 250. 261.30� 36� BB1UBK3630P 245. 269. 280.36� 36� BB1UBK3636P 259. 285. 297.42� 36� BB1UBK3642P 274. 300. 314.48� 36� BB1UBK3648P 291. 319. 335.
Order Code
Example:
Specification Information Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
Template
32
Upper Back Kit42�h, 43�h and 49�h painted
description w d h pattern no. P1 P2 P3
42�h upper back kit, paintedFor use on 64�h unit with reversal at credenzaheight
18� 42� BB1UBK4218P $214. $234. $246.24� 42� BB1UBK4224P 229. 250. 263.30� 42� BB1UBK4230P 245. 270. 281.36� 42� BB1UBK4236P 260. 288. 298.42� 42� BB1UBK4242P 276. 302. 315.48� 42� BB1UBK4248P 292. 320. 337.
43�h upper back kit, paintedFor use on 71�h unit with reversal at worksurfaceheight
18� 43� BB1UBK4318P 214. 234. 246.24� 43� BB1UBK4324P 229. 250. 263.30� 43� BB1UBK4330P 245. 270. 281.36� 43� BB1UBK4336P 260. 288. 298.42� 43� BB1UBK4342P 276. 302. 315.48� 43� BB1UBK4348P 292. 320. 337.
49�h upper back kit, paintedFor use on 71�h unit with reversal at credenzaheight
18� 49� BB1UBK4918P 214. 234. 246.24� 49� BB1UBK4924P 229. 250. 263.30� 49� BB1UBK4930P 245. 270. 281.36� 49� BB1UBK4936P 260. 288. 298.42� 49� BB1UBK4942P 276. 302. 315.48� 49� BB1UBK4948P 292. 320. 337.
Order Code
Example:
Specification Information Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
Template
33
Upper Back Kit14�h and 15�h fabric
description w d h pattern no. 10 20 30 40
14�h upper back kit, fabricFor use on 42�h unit with reversal atworksurface height (not compatiblewith 15�h door components)
18� 14� BB1UBK1418F $306. $332. $343. $356.24� 14� BB1UBK1424F 314. 340. 354. 369.30� 14� BB1UBK1430F 320. 347. 361. 376.36� 14� BB1UBK1436F 342. 372. 389. 401.42� 14� BB1UBK1442F 350. 379. 396. 410.48� 14� BB1UBK1448F 358. 387. 403. 418.
15�h upper back kit, fabricFor use on 57�h and taller units with passthrough or reversed shelf storage below(compatible with all 15�h door kits)
18� 15� BB1UBK1518F 315. 341. 356. 370.24� 15� BB1UBK1524F 335. 358. 376. 389.30� 15� BB1UBK1530F 342. 372. 389. 401.36� 15� BB1UBK1536F 372. 399. 417. 433.42� 15� BB1UBK1542F 382. 413. 432. 447.48� 15� BB1UBK1548F 393. 425. 445. 462.60� 15� BB1UBK1560F 410. 438. 461. 477.72� 15� BB1UBK1572F * * * *
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
60�w and 72�w upper back kits arerequired with all 60�w and 72�wupper shelf kits.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
34
Upper Back Kit20�h and 22�h fabric
description w d h pattern no. 10 20 30 40
20�h upper back kit, fabricFor use on 57�h and taller units with passthrough or reversed shelf storage below(compatible with all 20�h door kits)
18� 20� BB1UBK2018F $323. $349. $363. $379.24� 20� BB1UBK2024F 341. 369. 386. 398.30� 20� BB1UBK2030F 354. 383. 399. 415.36� 20� BB1UBK2036F 387. 417. 436. 456.42� 20� BB1UBK2042F 401. 433. 456. 469.48� 20� BB1UBK2048F 414. 447. 467. 484.60� 20� BB1UBK2060F 429. 462. 482. 497.72� 20� BB1UBK2072F * * * *
22�h upper back kit, fabricFor use on 50�h unit reversal atworksurface height
18� 22� BB1UBK2218F 323. 350. 363. 379.24� 22� BB1UBK2224F 341. 370. 386. 398.30� 22� BB1UBK2230F 354. 385. 401. 415.36� 22� BB1UBK2236F 389. 418. 437. 458.42� 22� BB1UBK2242F 401. 434. 458. 469.48� 22� BB1UBK2248F 414. 447. 467. 484.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
60�w and 72�w upper back kits arerequired with all 60�w and 72�wupper shelf kits.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
35
Upper Back Kit28�h and 29�h fabric
description w d h pattern no. 10 20 30 40
28�h upper back kit, fabricFor use on 50�h unit reversalat credenza height
18� 28� BB1UBK2818F $349. $376. $392. $407.24� 28� BB1UBK2824F 379. 407. 428. 439.30� 28� BB1UBK2830F 397. 431. 450. 466.36� 28� BB1UBK2836F 448. 484. 508. 525.42� 28� BB1UBK2842F 469. 510. 531. 548.48� 28� BB1UBK2848F 490. 530. 555. 573.
29�h upper back kit, fabricFor use on 57�h unit reversalat worksurface height
18� 29� BB1UBK2918F 349. 376. 392. 407.24� 29� BB1UBK2924F 379. 407. 428. 439.30� 29� BB1UBK2930F 397. 431. 450. 466.36� 29� BB1UBK2936F 448. 484. 508. 525.42� 29� BB1UBK2942F 469. 510. 531. 548.48� 29� BB1UBK2948F 490. 530. 555. 573.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
Template
36
Upper Back Kit35�h and 36�h fabric
description w d h pattern no. 10 20 30 40
35�h upper back kit, fabricFor use on 57�h unit reversalat credenza height
18� 35� BB1UBK3518F $358. $387. $403. $418.24� 35� BB1UBK3524F 391. 423. 439. 460.30� 35� BB1UBK3530F 415. 448. 468. 485.36� 35� BB1UBK3536F 476. 512. 536. 555.42� 35� BB1UBK3542F 494. 536. 559. 579.48� 35� BB1UBK3548F 517. 559. 585. 607.
36�h upper back kit, fabricFor use on 64�h unit reversalat worksurface height
18� 36� BB1UBK3618F 358. 387. 403. 418.24� 36� BB1UBK3624F 391. 423. 439. 460.30� 36� BB1UBK3630F 415. 448. 468. 485.36� 36� BB1UBK3636F 476. 512. 536. 555.42� 36� BB1UBK3642F 494. 536. 559. 579.48� 36� BB1UBK3648F 517. 559. 585. 607.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
Template
37
Upper Back Kit42�h, 43�h and 49�h fabric
description w d h pattern no. 10 20 30 40
42�h upper back kit, fabricFor use on 64�h unit reversalat credenza height
18� 42� BB1UBK4218F $366. $396. $415. $431.24� 42� BB1UBK4224F 403. 436. 460. 476.30� 42� BB1UBK4230F 429. 464. 485. 501.36� 42� BB1UBK4236F 497. 539. 564. 583.42� 42� BB1UBK4242F 522. 564. 588. 610.48� 42� BB1UBK4248F 544. 587. 615. 635.
43�h upper back kit, fabricFor use on 71�h unit reversalat worksurface height
18� 43� BB1UBK4318F 366. 396. 415. 431.24� 43� BB1UBK4324F 403. 436. 460. 476.30� 43� BB1UBK4330F 429. 464. 485. 501.36� 43� BB1UBK4336F 497. 539. 564. 583.42� 43� BB1UBK4342F 522. 564. 588. 610.48� 43� BB1UBK4348F 544. 587. 615. 635.
49�h upper back kit, fabricFor use on 71�h unit reversalat credenza height
18� 49� BB1UBK4918F 366. 396. 415. 431.24� 49� BB1UBK4924F 403. 436. 460. 476.30� 49� BB1UBK4930F 429. 464. 485. 501.36� 49� BB1UBK4936F 497. 539. 564. 583.42� 49� BB1UBK4942F 522. 564. 588. 610.48� 49� BB1UBK4948F 544. 587. 615. 635.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Upper back covers a section fromthe top to the underside of a shelf orworksurface shelf.
15�h and 20�h upper backs aredesigned to work withcorresponding storage doors. Allother heights are designed to createunits with reversal at worksurface orcredenza height as noted.
Template
38
Mid Back KitBack kit for alternate facing unit, painted
description w d h pattern no. P1 P2 P3
Back kit, directly below worksurface height, foralternate facing one-high file drawer kits orbookcase openings.
18� 12� BB1MBK1218P $201. $221. $229.24� 12� BB1MBK1224P 204. 226. 234.30� 12� BB1MBK1230P 211. 231. 240.36� 12� BB1MBK1236P 218. 235. 248.42� 12� BB1MBK1242P 222. 244. 252.48� 12� BB1MBK1248P 226. 248. 259.
Order Code
Example:
Specification Information Application Notes
Back kit for alternate facing units(12�h) is for use directly underworksurface height only. Intendedfor 2-sided applications whereone-high drawer kits or bookcaseopenings are alternate facing.
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
Template
39
Mid Back Kit57�h unit painted
description w d h pattern no. P1 P2 P3
Mid back kit for 57�h unit, paintedreversal at worksurface height with15� upper storage
18� 14� BB1MBK571518WP $201. $221. $229.24� 14� BB1MBK571524WP 204. 226. 234.30� 14� BB1MBK571530WP 211. 231. 240.36� 14� BB1MBK571536WP 218. 235. 248.42� 14� BB1MBK571542WP 222. 244. 252.48� 14� BB1MBK571548WP 226. 248. 259.60� 14� BB1MBK571560WP 238. 263. 274.72� 14� BB1MBK571572WP 254. 277. 289.
Mid back kit for 57�h unit, paintedreversal at credenza height with15�h upper storage
18� 20� BB1MBK571518CP 211. 231. 240.24� 20� BB1MBK571524CP 221. 240. 250.30� 20� BB1MBK571530CP 229. 250. 263.36� 20� BB1MBK571536CP 237. 261. 274.42� 20� BB1MBK571542CP 248. 273. 285.48� 20� BB1MBK571548CP 258. 282. 296.60� 20� BB1MBK571560CP 273. 297. 310.72� 20� BB1MBK571572CP 288. 312. 326.
Order Code
Example:
Specification Information Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
12�h mid back is for use directlyunder worksurface height only.
Template
40
Mid Back Kit64�h unit painted
description w d h pattern no. P1 P2 P3
Mid back kit for 64�h unit, paintedreversal at worksurface height with15� upper storage
18� 21� BB1MBK641518WP $211. $231. $240.24� 21� BB1MBK641524WP 221. 240. 250.30� 21� BB1MBK641530WP 229. 250. 263.36� 21� BB1MBK641536WP 237. 261. 274.42� 21� BB1MBK641542WP 248. 273. 285.48� 21� BB1MBK641548WP 258. 282. 296.60� 21� BB1MBK641560WP 273. 297. 310.72� 21� BB1MBK641572WP 288. 312. 326.
Mid back kit for 64�h unit, paintedreversal at worksurface height with20� upper storage
18� 16� BB1MBK642018WP 211. 232. 244.24� 16� BB1MBK642024WP 222. 244. 252.30� 16� BB1MBK642030WP 229. 252. 265.36� 16� BB1MBK642036WP 238. 263. 275.42� 16� BB1MBK642042WP 248. 274. 288.48� 16� BB1MBK642048WP 259. 284. 297.60� 16� BB1MBK642060WP 274. 298. 312.72� 16� BB1MBK642072WP 289. 313. 327.
Mid back kit for 64�h unit, paintedreversal at credenza height with15� upper storage
18� 27� BB1MBK641518CP 228. 250. 261.24� 27� BB1MBK641524CP 245. 269. 281.30� 27� BB1MBK641530CP 260. 285. 299.36� 27� BB1MBK641536CP 276. 305. 317.42� 27� BB1MBK641542CP 293. 321. 338.48� 27� BB1MBK641548CP 308. 339. 354.60� 27� BB1MBK641560CP 323. 353. 370.72� 27� BB1MBK641572CP 339. 369. 385.
Mid back kit for 64�h unit, paintedreversal at credenza height with20� upper storage
18� 22� BB1MBK642018CP 218. 237. 248.24� 22� BB1MBK642024CP 227. 248. 260.30� 22� BB1MBK642030CP 235. 260. 273.36� 22� BB1MBK642036CP 247. 273. 285.42� 22� BB1MBK642042CP 259. 284. 297.48� 22� BB1MBK642048CP 270. 296. 308.60� 22� BB1MBK642060CP 284. 310. 323.72� 22� BB1MBK642072CP 298. 326. 339.
Order Code
Example:
Specification Information Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
Template
41
Mid Back Kit71�h unit painted
description w d h pattern no. P1 P2 P3
Mid back kit for 71�h unit, paintedreversal at worksurface height with15� upper storage
18� 28� BB1MBK711518WP $228. $250. $261.24� 28� BB1MBK711524WP 245. 269. 281.30� 28� BB1MBK711530WP 260. 285. 298.36� 28� BB1MBK711536WP 276. 305. 317.42� 28� BB1MBK711542WP 293. 321. 338.48� 28� BB1MBK711548WP 308. 339. 354.60� 28� BB1MBK711560WP 339. 369. 385.72� 28� BB1MBK711572WP 369. 397. 414.
Mid back kit for 71�h unit, paintedreversal at worksurface height with20� upper storage
18� 23� BB1MBK712018WP 218. 236. 248.24� 23� BB1MBK712024WP 227. 248. 260.30� 23� BB1MBK712030WP 235. 260. 273.36� 23� BB1MBK712036WP 247. 273. 285.42� 23� BB1MBK712042WP 259. 284. 297.48� 23� BB1MBK712048WP 270. 296. 308.60� 23� BB1MBK712060WP 298. 326. 339.72� 23� BB1MBK712072WP 330. 354. 369.
Mid back kit for 71�h unit, paintedreversal at credenza height with15� upper storage
18� 34� BB1MBK711518CP 237. 260. 273.24� 34� BB1MBK711524CP 254. 277. 291.30� 34� BB1MBK711530CP 272. 281. 308.36� 34� BB1MBK711536CP 288. 314. 330.42� 34� BB1MBK711542CP 302. 335. 347.48� 34� BB1MBK711548CP 319. 350. 363.60� 34� BB1MBK711560CP 349. 380. 393.72� 34� BB1MBK711572CP 379. 410. 424.
Mid back kit for 71�h unit, paintedreversal at credenza height with20� upper storage
18� 29� BB1MBK712018CP 229. 250. 263.24� 29� BB1MBK712024CP 246. 270. 281.30� 29� BB1MBK712030CP 261. 273. 299.36� 29� BB1MBK712036CP 277. 306. 319.42� 29� BB1MBK712042CP 295. 323. 339.48� 29� BB1MBK712048CP 310. 341. 355.60� 29� BB1MBK712060CP 340. 372. 386.72� 29� BB1MBK712072CP 370. 399. 415.
Order Code
Example:
Specification Information Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
Template
42
Mid Back Kit78�h unit painted
description w d h pattern no. P1 P2 P3
Mid back kit for 78�h unit, paintedreversal at worksurface height with20� upper storage
18� 30� BB1MBK782018WP $229. $250. $263.24� 30� BB1MBK782024WP 246. 270. 281.30� 30� BB1MBK782030WP 261. 273. 299.36� 30� BB1MBK782036WP 277. 306. 319.42� 30� BB1MBK782042WP 295. 323. 339.48� 30� BB1MBK782048WP 310. 341. 355.60� 30� BB1MBK782060WP 340. 372. 386.72� 30� BB1MBK782072WP 370. 399. 415.
Mid back kit for 78�h unit, paintedreversal at credenza height with20� upper storage
18� 36� BB1MBK782018CP 237. 260. 273.24� 36� BB1MBK782024CP 254. 277. 291.30� 36� BB1MBK782030CP 272. 281. 308.36� 36� BB1MBK782036CP 288. 314. 330.42� 36� BB1MBK782042CP 302. 335. 347.48� 36� BB1MBK782048CP 319. 350. 363.60� 36� BB1MBK782060CP 349. 380. 393.72� 36� BB1MBK782072CP 379. 410. 424.
Order Code
Example:
Specification Information Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
Template
43
Mid Back KitBack kit for alternate facing unit, fabric
description w d h pattern no. 10 20 30 40
Back kit, directly below worksurface height, foralternate facing one-high file drawer kits orbookcase openings.
18� 12� BB1MBK1218F $320. $345. $360. $376.24� 12� BB1MBK1224F 333. 356. 374. 387.30� 12� BB1MBK1230F 339. 363. 383. 396.36� 12� BB1MBK1236F 360. 390. 407. 423.42� 12� BB1MBK1242F 370. 398. 417. 433.48� 12� BB1MBK1248F 379. 410. 428. 443.
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Back kit for alternate facing units(12�h) is for use directly underworksurface height only. Intendedfor 2-sided applications whereone-high drawer kits or bookcaseopenings are alternate facing.
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through. 78�h mid back onlyavailable for use with 20� upperstorage or pass-through.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
44
Mid Back Kit57�h unit fabric
description w d h pattern no. 10 20 30 40
Mid back kit for 57�h unit, fabricreversal at worksurface height with15� upper storage
18� 14� BB1MBK571518WF $320. $345. $360. $376.24� 14� BB1MBK571524WF 333. 356. 374. 387.30� 14� BB1MBK571530WF 339. 363. 383. 396.36� 14� BB1MBK571536WF 360. 390. 407. 423.42� 14� BB1MBK571542WF 370. 398. 417. 433.48� 14� BB1MBK571548WF 379. 410. 428. 443.60� 14� BB1MBK571560WF 407. 437. 450. 475.72� 14� BB1MBK571572WF * * * *
Mid back kit for 57�h unit, fabricreversal at credenza height with15� upper storage
18� 20� BB1MBK571518CF 339. 363. 383. 396.24� 20� BB1MBK571524CF 356. 386. 402. 417.30� 20� BB1MBK571530CF 373. 401. 420. 435.36� 20� BB1MBK571536CF 405. 437. 461. 477.42� 20� BB1MBK571542CF 420. 458. 477. 492.48� 20� BB1MBK571548CF 433. 467. 489. 509.60� 20� BB1MBK571560CF 464. 496. 519. 537.72� 20� BB1MBK571572CF * * * *
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
12�h mid back is for use directlyunder worksurface height only.
Template
45
Mid Back Kit64�h unit fabric
description w d h pattern no. 10 20 30 40
Mid back kit for 64�h unit, fabricreversal at worksurface height with15� upper storage
18� 21� BB1MBK641518WF $339. $363. $383. $396.24� 21� BB1MBK641524WF 356. 386. 402. 417.30� 21� BB1MBK641530WF 373. 401. 420. 435.36� 21� BB1MBK641536WF 405. 437. 461. 477.42� 21� BB1MBK641542WF 420. 458. 477. 492.48� 21� BB1MBK641548WF 433. 467. 489. 509.60� 21� BB1MBK641560WF 464. 496. 519. 537.72� 21� BB1MBK641572WF * * * *
Mid back kit for 64�h unit, fabricreversal at worksurface height with20� upper storage
18� 16� BB1MBK642018WF 335. 358. 377. 390.24� 16� BB1MBK642024WF 350. 379. 396. 412.30� 16� BB1MBK642030WF 360. 391. 410. 424.36� 16� BB1MBK642036WF 391. 424. 443. 460.42� 16� BB1MBK642042WF 402. 435. 459. 475.48� 16� BB1MBK642048WF 415. 450. 469. 486.60� 16� BB1MBK642060WF 445. 480. 500. 516.72� 16� BB1MBK642072WF * * * *
Mid back kit for 64�h unit, fabricreversal at credenza height with15� upper storage
18� 27� BB1MBK641518CF 361. 391. 412. 425.24� 27� BB1MBK641524CF 393. 425. 445. 462.30� 27� BB1MBK641530CF 415. 448. 469. 486.36� 27� BB1MBK641536CF 466. 505. 527. 544.42� 27� BB1MBK641542CF 489. 529. 555. 573.48� 27� BB1MBK641548CF 512. 553. 578. 597.60� 27� BB1MBK641560CF 541. 582. 608. 628.72� 27� BB1MBK641572CF * * * *
Mid back kit for 64�h unit, fabricreversal at credenza height with20� upper storage
18� 22� BB1MBK642018CF 345. 374. 390. 403.24� 22� BB1MBK642024CF 370. 398. 416. 432.30� 22� BB1MBK642030CF 386. 416. 435. 453.36� 22� BB1MBK642036CF 423. 459. 479. 492.42� 22� BB1MBK642042CF 437. 475. 494. 513.48� 22� BB1MBK642048CF 456. 477. 513. 530.60� 22� BB1MBK642060CF 484. 508. 542. 560.72� 22� BB1MBK642072CF * * * *
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
46
Mid Back Kit71�h unit fabric
description w d h pattern no. 10 20 30 40
Mid back kit for 71�h unit, fabricreversal at worksurface height with15� upper storage
18� 28� BB1MBK711518WF $361. $391. $412. $425.24� 28� BB1MBK711524WF 393. 425. 445. 462.30� 28� BB1MBK711530WF 415. 448. 469. 486.36� 28� BB1MBK711536WF 466. 505. 527. 544.42� 28� BB1MBK711542WF 489. 529. 555. 573.48� 28� BB1MBK711548WF 512. 553. 578. 597.60� 28� BB1MBK711560WF 557. 593. 622. 641.72� 28� BB1MBK711572WF * * * *
Mid back kit for 71�h unit, fabricreversal at worksurface height with20� upper storage
18� 23� BB1MBK712018WF 345. 374. 390. 403.24� 23� BB1MBK712024WF 370. 398. 416. 432.30� 23� BB1MBK712030WF 386. 416. 435. 453.36� 23� BB1MBK712036WF 423. 459. 479. 492.42� 23� BB1MBK712042WF 437. 475. 494. 513.48� 23� BB1MBK712048WF 456. 477. 513. 530.60� 23� BB1MBK712060WF 497. 520. 558. 575.72� 23� BB1MBK712072WF * * * *
Mid back kit for 71�h unit, fabricreversal at credenza height with15� upper storage
18� 34� BB1MBK711518CF 374. 402. 420. 435.24� 34� BB1MBK711524CF 405. 436. 460. 476.30� 34� BB1MBK711530CF 428. 462. 482. 497.36� 34� BB1MBK711536CF 480. 517. 541. 560.42� 34� BB1MBK711542CF 506. 543. 569. 587.48� 34� BB1MBK711548CF 526. 568. 591. 613.60� 34� BB1MBK711560CF 569. 612. 635. 657.72� 34� BB1MBK711572CF * * * *
Mid back kit for 71�h unit, fabricreversal at credenza height with20� upper storage
18� 29� BB1MBK712018CF 369. 397. 415. 431.24� 29� BB1MBK712024CF 399. 432. 454. 468.30� 29� BB1MBK712030CF 420. 458. 477. 491.36� 29� BB1MBK712036CF 475. 512. 536. 555.42� 29� BB1MBK712042CF 497. 539. 564. 583.48� 29� BB1MBK712048CF 519. 563. 586. 608.60� 29� BB1MBK712060CF 564. 607. 631. 653.72� 29� BB1MBK712072CF * * * *
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
47
Mid Back Kit78�h unit fabric
description w d h pattern no. 10 20 30 40
Mid back kit for 78�h unit, fabricreversal at worksurface height with20� upper storage
18� 30� BB1MBK782018WF $369. $397. $415. $431.24� 30� BB1MBK782024WF 399. 432. 454. 468.30� 30� BB1MBK782030WF 420. 458. 477. 491.36� 30� BB1MBK782036WF 475. 512. 536. 555.42� 30� BB1MBK782042WF 497. 539. 564. 583.48� 30� BB1MBK782048WF 519. 563. 586. 608.60� 30� BB1MBK782060WF 564. 607. 631. 653.72� 30� BB1MBK782072WF * * * *
Mid back kit for 78�h unit, fabricreversal at credenza height with20� upper storage
18� 36� BB1MBK782018CF 377. 405. 424. 437.24� 36� BB1MBK782024CF 410. 438. 462. 479.30� 36� BB1MBK782030CF 431. 465. 485. 501.36� 36� BB1MBK782036CF 482. 520. 543. 564.42� 36� BB1MBK782042CF 509. 545. 572. 589.48� 36� BB1MBK782048CF 528. 570. 593. 615.60� 36� BB1MBK782060CF 572. 614. 638. 660.72� 36� BB1MBK782072CF * * * *
Order Code
Example:
Specification Information
Specify a paint color for the metalportion of the back which is visiblefrom the inside of the unit and afabric for the fabric insert on theback side.
Application Notes
Mid back covers a standard shelfdown to the underside of either aworksurface or credenza heightworksurface shelf.
57�h mid back only available for usewith 15�h upper storage orpass-through.
78�h mid back only available for usewith 20� upper storage orpass-through.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
48
Full Height Inside Back Inserts16�h to 50�h fabric
description w d h pattern no. 10 20 30 40
16�h full height inside back insert, fabric 18� 1/2� 16� BC1FFINS1618 $128. $142. $149. $155.24� 1/2� 16� BC1FFINS1624 153. 167. 174. 181.30� 1/2� 16� BC1FFINS1630 170. 184. 191. 201.36� 1/2� 16� BC1FFINS1636 184. 201. 210. 218.42� 1/2� 16� BC1FFINS1642 189. 208. 219. 226.48� 1/2� 16� BC1FFINS1648 202. 221. 229. 235.
22�h full height inside back insert, fabric 18� 1/2� 22� BC1FFINS2218 135. 149. 155. 161.24� 1/2� 22� BC1FFINS2224 160. 172. 180. 186.30� 1/2� 22� BC1FFINS2230 175. 188. 200. 205.36� 1/2� 22� BC1FFINS2236 188. 205. 216. 223.42� 1/2� 22� BC1FFINS2242 197. 214. 224. 231.48� 1/2� 22� BC1FFINS2248 208. 226. 234. 244.
25�h Antenna full height inside back insert,fabric
18� 1/2� 25� BC1FFINS2518 143. 156. 164. 170.24� 1/2� 25� BC1FFINS2524 165. 179. 186. 191.30� 1/2� 25� BC1FFINS2530 181. 195. 204. 212.36� 1/2� 25� BC1FFINS2536 195. 212. 223. 229.42� 1/2� 25� BC1FFINS2542 204. 223. 231. 238.48� 1/2� 25� BC1FFINS2548 214. 231. 240. 249.
28�h full height inside back insert, fabric 18� 1/2� 28� BC1FFINS2818 143. 156. 164. 170.23� 1/2� 28� BC1FFINS2823 164. 176. 185. 189.24� 1/2� 28� BC1FFINS2824 165. 179. 186. 191.29� 1/2� 28� BC1FFINS2829 180. 194. 203. 211.30� 1/2� 28� BC1FFINS2830 181. 195. 204. 212.36� 1/2� 28� BC1FFINS2836 195. 212. 223. 229.42� 1/2� 28� BC1FFINS2842 204. 223. 231. 238.48� 1/2� 28� BC1FFINS2848 214. 231. 240. 249.
42�h full height inside back insert, fabric 15� 1/2� 42� BC1FFINS4215 161. 174. 183. 187.18� 1/2� 42� BC1FFINS4218 161. 174. 183. 187.24� 1/2� 42� BC1FFINS4224 181. 195. 204. 212.30� 1/2� 42� BC1FFINS4230 200. 216. 226. 232.36� 1/2� 42� BC1FFINS4236 223. 238. 250. 260.42� 1/2� 42� BC1FFINS4242 252. 274. 288. 297.48� 1/2� 42� BC1FFINS4248 263. 285. 298. 308.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
71�h and 78�h inside back insert kitincludes two inserts to match thesegmented back in those heights.
Template
49
Full Height Inside Back Inserts16�h to 50�h fabric
description w d h pattern no. 10 20 30 40
50�h full height inside back insert, fabric 15� 1/2� 50� BC1FFINS5015 $176. $189. $201. $208.18� 1/2� 50� BC1FFINS5018 176. 189. 201. 208.24� 1/2� 50� BC1FFINS5024 195. 212. 223. 229.30� 1/2� 50� BC1FFINS5030 223. 238. 250. 260.36� 1/2� 50� BC1FFINS5036 254. 275. 289. 298.42� 1/2� 50� BC1FFINS5042 281. 305. 317. 332.48� 1/2� 50� BC1FFINS5048 308. 336. 350. 360.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
71�h and 78�h inside back insert kitincludes two inserts to match thesegmented back in those heights.
Template
50
Full Height Inside Back Inserts57�h to 78�h fabric
description w d h pattern no. 10 20 30 40
57�h full height inside back insert, fabric 15� 1/2� 57� BC1FFINS5715 $184. $200. $210. $218.18� 1/2� 57� BC1FFINS5718 184. 200. 210. 218.24� 1/2� 57� BC1FFINS5724 205. 224. 233. 240.30� 1/2� 57� BC1FFINS5730 235. 255. 269. 277.36� 1/2� 57� BC1FFINS5736 263. 285. 298. 308.42� 1/2� 57� BC1FFINS5742 292. 314. 332. 341.48� 1/2� 57� BC1FFINS5748 319. 345. 360. 374.
64�h full height inside back insert, fabric 15� 1/2� 64� BC1FFINS6415 216. 232. 244. 250.18� 1/2� 64� BC1FFINS6418 216. 232. 244. 250.24� 1/2� 64� BC1FFINS6424 232. 250. 263. 273.30� 1/2� 64� BC1FFINS6430 274. 296. 310. 320.36� 1/2� 64� BC1FFINS6436 305. 332. 343. 356.42� 1/2� 64� BC1FFINS6442 333. 356. 376. 389.48� 1/2� 64� BC1FFINS6448 359. 390. 407. 423.
71�h full height inside back insert, fabric 15� 1/2� 71� BC1FFINS7115 232. 250. 263. 273.18� 1/2� 71� BC1FFINS7118 232. 250. 263. 273.24� 1/2� 71� BC1FFINS7124 249. 272. 282. 293.30� 1/2� 71� BC1FFINS7130 292. 314. 332. 341.36� 1/2� 71� BC1FFINS7136 292. 314. 332. 341.42� 1/2� 71� BC1FFINS7142 350. 379. 396. 412.48� 1/2� 71� BC1FFINS7148 379. 410. 429. 443.
78�h full height inside back insert, fabric 18� 1/2� 78� BC1FFINS7818 249. 272. 282. 293.24� 1/2� 78� BC1FFINS7824 293. 315. 333. 342.30� 1/2� 78� BC1FFINS7830 333. 356. 376. 389.36� 1/2� 78� BC1FFINS7836 370. 398. 417. 433.42� 1/2� 78� BC1FFINS7842 412. 445. 466. 482.48� 1/2� 78� BC1FFINS7848 450. 486. 510. 527.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
71�h and 78�h inside back insert kitincludes two inserts to match thesegmented back in those heights.
Template
51
Full Height Inside Back Inserts16�h to 50�h veneer
description w d h pattern no. V1 V2 V3
16�h full height inside back insert, veneer 18� 1/2� 16� BC1FVINS1618 $176. $203. $274.24� 1/2� 16� BC1FVINS1624 194. 224. 300.30� 1/2� 16� BC1FVINS1630 216. 247. 335.36� 1/2� 16� BC1FVINS1636 235. 273. 366.42� 1/2� 16� BC1FVINS1642 260. 298. 402.48� 1/2� 16� BC1FVINS1648 288. 332. 445.
22�h full height inside back insert, veneer 18� 1/2� 22� BC1FVINS2218 183. 210. 281.24� 1/2� 22� BC1FVINS2224 201. 229. 308.30� 1/2� 22� BC1FVINS2230 222. 252. 341.36� 1/2� 22� BC1FVINS2236 244. 280. 377.42� 1/2� 22� BC1FVINS2242 267. 306. 413.48� 1/2� 22� BC1FVINS2248 293. 338. 458.
25�h Antenna full height inside back insert,veneer
18� 1/2� 25� BC1FVINS2518 189. 221. 296.24� 1/2� 25� BC1FVINS2524 231. 265. 356.30� 1/2� 25� BC1FVINS2530 280. 320. 433.36� 1/2� 25� BC1FVINS2536 307. 353. 479.42� 1/2� 25� BC1FVINS2542 339. 389. 526.48� 1/2� 25� BC1FVINS2548 372. 428. 576.
28�h full height inside back insert, veneer 18� 1/2� 28� BC1FVINS2818 189. 221. 296.23� 1/2� 28� BC1FVINS2823 211. 240. 326.24� 1/2� 28� BC1FVINS2824 231. 265. 356.29� 1/2� 28� BC1FVINS2829 254. 293. 393.30� 1/2� 28� BC1FVINS2830 280. 320. 433.36� 1/2� 28� BC1FVINS2836 307. 353. 479.42� 1/2� 28� BC1FVINS2842 339. 389. 526.48� 1/2� 28� BC1FVINS2848 372. 428. 576.
42�h full height inside back insert, veneer 15� 1/2� 42� BC1FVINS4215 222. 252. 341.18� 1/2� 42� BC1FVINS4218 222. 252. 341.24� 1/2� 42� BC1FVINS4224 244. 280. 377.30� 1/2� 42� BC1FVINS4230 267. 306. 413.36� 1/2� 42� BC1FVINS4236 293. 338. 458.42� 1/2� 42� BC1FVINS4242 321. 372. 501.48� 1/2� 42� BC1FVINS4248 354. 407. 553.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size.
Grain pattern is vertical.
Application Notes
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
52
Full Height Inside Back Inserts16�h to 50�h veneer
description w d h pattern no. V1 V2 V3
50�h full height inside back insert, veneer 15� 1/2� 50� BC1FVINS5015 $232. $269. $359.18� 1/2� 50� BC1FVINS5018 232. 269. 359.24� 1/2� 50� BC1FVINS5024 255. 295. 397.30� 1/2� 50� BC1FVINS5030 281. 323. 436.36� 1/2� 50� BC1FVINS5036 308. 354. 480.42� 1/2� 50� BC1FVINS5042 340. 391. 529.48� 1/2� 50� BC1FVINS5048 383. 438. 592.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size.
Grain pattern is vertical.
Application Notes
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
53
Full Height Inside Back Inserts57�h to 78�h veneer
description w d h pattern no. V1 V2 V3
57�h full height inside back insert, veneer 15� 1/2� 57� BC1FVINS5715 $255. $295. $397.18� 1/2� 57� BC1FVINS5718 281. 323. 436.24� 1/2� 57� BC1FVINS5724 308. 354. 480.30� 1/2� 57� BC1FVINS5730 340. 391. 529.36� 1/2� 57� BC1FVINS5736 374. 431. 582.42� 1/2� 57� BC1FVINS5742 413. 476. 638.48� 1/2� 57� BC1FVINS5748 454. 520. 700.
64�h full height inside back insert, veneer 15� 1/2� 64� BC1FVINS6415 281. 323. 436.18� 1/2� 64� BC1FVINS6418 308. 354. 480.24� 1/2� 64� BC1FVINS6424 340. 391. 529.30� 1/2� 64� BC1FVINS6430 374. 431. 582.36� 1/2� 64� BC1FVINS6436 412. 475. 637.42� 1/2� 64� BC1FVINS6442 454. 520. 700.48� 1/2� 64� BC1FVINS6448 497. 573. 775.
71�h full height inside back insert, veneer 15� 1/2� 71� BC1FVINS7115 308. 354. 480.18� 1/2� 71� BC1FVINS7118 340. 391. 529.24� 1/2� 71� BC1FVINS7124 374. 431. 582.30� 1/2� 71� BC1FVINS7130 412. 475. 637.36� 1/2� 71� BC1FVINS7136 454. 520. 700.42� 1/2� 71� BC1FVINS7142 497. 573. 775.48� 1/2� 71� BC1FVINS7148 545. 630. 849.
78�h full height inside back insert, veneer 18� 1/2� 78� BC1FVINS7818 340. 391. 529.24� 1/2� 78� BC1FVINS7824 374. 431. 582.30� 1/2� 78� BC1FVINS7830 412. 475. 637.36� 1/2� 78� BC1FVINS7836 454. 520. 700.42� 1/2� 78� BC1FVINS7842 497. 573. 775.48� 1/2� 78� BC1FVINS7848 554. 634. 859.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size.
Grain pattern is vertical.
Application Notes
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
71�h and 78�h inside back insert kitincludes two inserts to match thesegmented back in those heights.
Template
54
Lower Inside Back Inserts42�h, 44�h and 49�h fabric
description w d h pattern no. 10 20 30 40
42�h lower inside back insert, fabricFor use on 57�h unit with 15�h toppass-through or reversed storage
18� 1/2� 42� BC1LFINS4218 $156. $170. $176. $183.24� 1/2� 42� BC1LFINS4224 175. 188. 200. 205.30� 1/2� 42� BC1LFINS4230 191. 210. 219. 227.36� 1/2� 42� BC1LFINS4236 223. 238. 250. 260.42� 1/2� 42� BC1LFINS4242 245. 265. 276. 288.48� 1/2� 42� BC1LFINS4248 250. 273. 285. 295.
44�h lower inside back insert, fabricFor use on 64�h unit with 20�h toppass-through or reversed storage
18� 1/2� 44� BC1LFINS4418 156. 170. 176. 183.24� 1/2� 44� BC1LFINS4424 176. 189. 201. 208.30� 1/2� 44� BC1LFINS4430 176. 189. 201. 208.36� 1/2� 44� BC1LFINS4436 226. 245. 254. 263.42� 1/2� 44� BC1LFINS4442 247. 269. 280. 291.48� 1/2� 44� BC1LFINS4448 254. 275. 289. 298.
49�h lower inside back insert, fabricFor use on 64�h unit with 15�h toppass-through or reversed storage
18� 1/2� 49� BC1LFINS4918 164. 176. 185. 189.24� 1/2� 49� BC1LFINS4924 184. 201. 210. 218.30� 1/2� 49� BC1LFINS4930 195. 212. 223. 229.36� 1/2� 49� BC1LFINS4936 238. 259. 273. 281.42� 1/2� 49� BC1LFINS4942 249. 272. 282. 293.48� 1/2� 49� BC1LFINS4948 258. 277. 292. 300.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
55
Lower Inside Back Inserts51�h, 56�h and 58�h fabric
description w d h pattern no. 10 20 30 40
51�h lower inside back insert, fabricFor use on 71�h unit with 20�h toppass-through or reversed storage
18� 1/2� 51� BC1LFINS5118 $169. $183. $188. $197.24� 1/2� 51� BC1LFINS5124 189. 208. 218. 224.30� 1/2� 51� BC1LFINS5130 203. 221. 229. 237.36� 1/2� 51� BC1LFINS5136 254. 275. 289. 298.42� 1/2� 51� BC1LFINS5142 265. 288. 299. 310.48� 1/2� 51� BC1LFINS5148 296. 319. 336. 345.
56�h lower inside back insert, fabricFor use on 71�h unit with 15�h toppass-through or reversed storage
18� 1/2� 56� BC1LFINS5618 171. 185. 191. 201.24� 1/2� 56� BC1LFINS5624 195. 212. 223. 229.30� 1/2� 56� BC1LFINS5630 211. 228. 237. 247.36� 1/2� 56� BC1LFINS5636 265. 288. 299. 310.42� 1/2� 56� BC1LFINS5642 275. 297. 312. 321.48� 1/2� 56� BC1LFINS5648 302. 330. 342. 354.
58�h lower inside back insert, fabricFor use on 78�h unit with 20�h toppass-through or reversed storage
18� 1/2� 58� BC1LFINS5818 174. 187. 197. 203.24� 1/2� 58� BC1LFINS5824 197. 214. 224. 231.30� 1/2� 58� BC1LFINS5830 216. 232. 244. 250.36� 1/2� 58� BC1LFINS5836 272. 293. 306. 317.42� 1/2� 58� BC1LFINS5842 282. 306. 319. 333.48� 1/2� 58� BC1LFINS5848 307. 335. 349. 359.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
56
Lower Inside Back Inserts42�h, 44�h and 49�h veneer
description w d h pattern no. V1 V2 V3
42�h lower inside back insert, veneerFor use on 57�h unit with 15�h toppass-through or reversed storage
18� 1/2� 42� BC1LVINS4218 $222. $252. $341.24� 1/2� 42� BC1LVINS4224 244. 280. 377.30� 1/2� 42� BC1LVINS4230 267. 306. 413.36� 1/2� 42� BC1LVINS4236 293. 338. 458.42� 1/2� 42� BC1LVINS4242 321. 372. 501.48� 1/2� 42� BC1LVINS4248 354. 407. 553.
44�h lower inside back insert, veneerFor use on 64�h unit with 20�h toppass-through or reversed storage
18� 1/2� 44� BC1LVINS4418 244. 280. 377.24� 1/2� 44� BC1LVINS4424 267. 306. 413.30� 1/2� 44� BC1LVINS4430 293. 338. 458.36� 1/2� 44� BC1LVINS4436 321. 372. 501.42� 1/2� 44� BC1LVINS4442 354. 407. 553.48� 1/2� 44� BC1LVINS4448 390. 450. 607.
49�h lower inside back insert, veneerFor use on 64�h unit with 15�h toppass-through or reversed storage
18� 1/2� 49� BC1LVINS4918 267. 306. 413.24� 1/2� 49� BC1LVINS4924 293. 338. 458.30� 1/2� 49� BC1LVINS4930 321. 372. 501.36� 1/2� 49� BC1LVINS4936 354. 407. 553.42� 1/2� 49� BC1LVINS4942 390. 450. 607.48� 1/2� 49� BC1LVINS4948 429. 492. 665.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size.
Grain pattern is vertical.
Application Notes
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
57
Lower Inside Back Inserts51�h, 56�h and 58�h veneer
description w d h pattern no. V1 V2 V3
51�h lower inside back insert, veneerFor use on 71�h unit with 20�h toppass-through or reversed storage
18� 1/2� 51� BC1LVINS5118 $235. $273. $366.24� 1/2� 51� BC1LVINS5124 260. 298. 402.30� 1/2� 51� BC1LVINS5130 288. 332. 445.36� 1/2� 51� BC1LVINS5136 314. 360. 489.42� 1/2� 51� BC1LVINS5142 345. 397. 537.48� 1/2� 51� BC1LVINS5148 382. 437. 591.
56�h lower inside back insert, veneerFor use on 71�h unit with 15�h toppass-through or reversed storage
18� 1/2� 56� BC1LVINS5618 255. 295. 397.24� 1/2� 56� BC1LVINS5624 281. 323. 436.30� 1/2� 56� BC1LVINS5630 308. 354. 480.36� 1/2� 56� BC1LVINS5636 340. 391. 529.42� 1/2� 56� BC1LVINS5642 374. 431. 582.48� 1/2� 56� BC1LVINS5648 413. 476. 638.
58�h lower inside back insert, veneerFor use on 78�h unit with 20�h toppass-through or reversed storage
18� 1/2� 58� BC1LVINS5818 281. 323. 436.24� 1/2� 58� BC1LVINS5824 308. 354. 480.30� 1/2� 58� BC1LVINS5830 340. 391. 529.36� 1/2� 58� BC1LVINS5836 374. 431. 582.42� 1/2� 58� BC1LVINS5842 412. 475. 637.48� 1/2� 58� BC1LVINS5848 454. 520. 700.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size.
Grain pattern is vertical.
Application Notes
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
58
Upper Inside Back Inserts14�h, 15�h, 20�h and 22�h fabric
description w d h pattern no. 10 20 30 40
14�h upper inside back insert, fabricFor use on 42�h unit with reversal atworksurface height(not compatible with 15�h door components)
18� 1/2� 14� BC1UFINS1418 $92. $99. $104. $106.24� 1/2� 14� BC1UFINS1424 98. 105. 111. 114.30� 1/2� 14� BC1UFINS1430 103. 112. 119. 122.36� 1/2� 14� BC1UFINS1436 108. 119. 124. 127.42� 1/2� 14� BC1UFINS1442 112. 123. 126. 129.48� 1/2� 14� BC1UFINS1448 120. 128. 135. 139.
15�h upper inside back insert, fabricFor use on 57�h and taller units withpass-through or reversed shelf storage below(compatible with all 15�h door kits)
18� 1/2� 15� BC1UFINS1518 93. 102. 105. 108.24� 1/2� 15� BC1UFINS1524 99. 106. 112. 117.30� 1/2� 15� BC1UFINS1530 104. 113. 120. 124.36� 1/2� 15� BC1UFINS1536 111. 120. 125. 128.42� 1/2� 15� BC1UFINS1542 113. 124. 128. 133.48� 1/2� 15� BC1UFINS1548 122. 129. 137. 142.60� 1/2� 15� BC1UFINS1560 135. 145. 153. 158.72� 1/2� 15� BC1UFINS1572 * * * *
20�h upper inside back insert, fabricFor use on 57�h and taller units withpass-through or reversed shelf storage below(compatible with all 20�h door kits)
18� 1/2� 20� BC1UFINS2018 124. 133. 139. 145.24� 1/2� 20� BC1UFINS2024 117. 126. 131. 137.30� 1/2� 20� BC1UFINS2030 127. 138. 145. 152.36� 1/2� 20� BC1UFINS2036 138. 152. 160. 164.42� 1/2� 20� BC1UFINS2042 144. 158. 165. 171.48� 1/2� 20� BC1UFINS2048 153. 167. 174. 180.60� 1/2� 20� BC1UFINS2060 169. 181. 187. 194.72� 1/2� 20� BC1UFINS2072 * * * *
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Information
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
59
Upper Inside Back Inserts14�h, 15�h, 20�h and 22�h fabric
description w d h pattern no. 10 20 30 40
22�h upper inside back insert, fabricFor use on 50�h unit reversal atworksurface height
18� 1/2� 22� BC1UFINS2218 $135. $149. $155. $161.24� 1/2� 22� BC1UFINS2224 127. 138. 145. 152.30� 1/2� 22� BC1UFINS2230 142. 155. 162. 169.36� 1/2� 22� BC1UFINS2236 155. 169. 175. 181.42� 1/2� 22� BC1UFINS2242 161. 174. 183. 187.48� 1/2� 22� BC1UFINS2248 169. 183. 188. 197.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Information
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
60
Upper Inside Back Inserts28�h, 29�h, 35�h and 36�h fabric
description w d h pattern no. 10 20 30 40
28�h upper inside back insert, fabricFor use on 50�h unit reversal atcredenza height
18� 1/2� 28� BC1UFINS2818 $149. $161. $169. $174.24� 1/2� 28� BC1UFINS2824 165. 179. 186. 191.30� 1/2� 28� BC1UFINS2830 183. 197. 205. 214.36� 1/2� 28� BC1UFINS2836 197. 214. 224. 231.42� 1/2� 28� BC1UFINS2842 205. 224. 233. 240.48� 1/2� 28� BC1UFINS2848 216. 232. 244. 250.
29�h upper inside back insert, fabricFor use on 50�h unit reversal atworksurface height
18� 1/2� 29� BC1UFINS2918 149. 161. 169. 174.24� 1/2� 29� BC1UFINS2924 165. 179. 186. 191.30� 1/2� 29� BC1UFINS2930 183. 197. 205. 214.36� 1/2� 29� BC1UFINS2936 197. 214. 224. 231.42� 1/2� 29� BC1UFINS2942 205. 224. 233. 240.48� 1/2� 29� BC1UFINS2948 216. 232. 244. 250.
35�h upper inside back insert, fabricFor use on 50�h unit reversal atcredenza height
18� 1/2� 35� BC1UFINS3518 156. 170. 176. 183.24� 1/2� 35� BC1UFINS3524 174. 187. 197. 203.30� 1/2� 35� BC1UFINS3530 189. 208. 218. 224.36� 1/2� 35� BC1UFINS3536 211. 228. 237. 247.42� 1/2� 35� BC1UFINS3542 219. 234. 247. 254.48� 1/2� 35� BC1UFINS3548 227. 246. 255. 267.
Order Code
Example:
Specificaiton Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
61
Upper Inside Back Inserts28�h, 29�h, 35�h and 36�h fabric
description w d h pattern no. 10 20 30 40
36�h upper inside back insert, fabricFor use on 64�h unit reversal atworksurface height
18� 1/2� 36� BC1UFINS3618 $156. $170. $176. $183.24� 1/2� 36� BC1UFINS3624 174. 187. 197. 203.30� 1/2� 36� BC1UFINS3630 189. 208. 218. 224.36� 1/2� 36� BC1UFINS3636 211. 228. 237. 247.42� 1/2� 36� BC1UFINS3642 219. 234. 247. 254.48� 1/2� 36� BC1UFINS3648 227. 246. 255. 267.
Order Code
Example:
Specificaiton Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
62
Upper Inside Back Inserts42�h, 43�h and 49�h fabric
description w d he pattern no. 10 20 30 40
42�h upper inside back insert, fabricFor use on 64�h unit reversal atcredenza height
18� 1/2� 42� BC1UFINS4218 $165. $179. $186. $191.24� 1/2� 42� BC1UFINS4224 181. 195. 204. 212.30� 1/2� 42� BC1UFINS4230 200. 216. 226. 232.36� 1/2� 42� BC1UFINS4236 223. 238. 250. 260.42� 1/2� 42� BC1UFINS4242 252. 274. 288. 297.48� 1/2� 42� BC1UFINS4248 263. 285. 298. 308.
43�h upper inside back insert, fabricFor use on 71�h unit reversal atworksurface height
18� 1/2� 43� BC1UFINS4318 165. 179. 186. 191.24� 1/2� 43� BC1UFINS4324 181. 195. 204. 212.30� 1/2� 43� BC1UFINS4330 200. 216. 226. 232.36� 1/2� 43� BC1UFINS4336 223. 238. 250. 260.42� 1/2� 43� BC1UFINS4342 252. 274. 288. 297.48� 1/2� 43� BC1UFINS4348 263. 285. 298. 308.
49�h upper inside back insert, fabricFor use on 71�h unit reversal atcredenza height
18� 1/2� 49� BC1UFINS4918 171. 184. 191. 201.24� 1/2� 49� BC1UFINS4924 186. 203. 212. 221.30� 1/2� 49� BC1UFINS4930 205. 223. 232. 238.36� 1/2� 49� BC1UFINS4936 229. 248. 260. 270.42� 1/2� 49� BC1UFINS4942 261. 282. 297. 307.48� 1/2� 49� BC1UFINS4948 273. 296. 308. 319.
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
63
Upper Inside Back Inserts14�h, 15�h, 20�h and 22�h veneer
description w d h pattern no. V1 V2 V3
14�h upper inside back insert, veneerFor use on 42�h unit reversal at worksurfaceheight (not compatible with 15�h doorcomponents)
18� 1/2� 14� BC1UVINS1418 $180. $205. $277.24� 1/2� 14� BC1UVINS1424 183. 210. 281.30� 1/2� 14� BC1UVINS1430 201. 229. 308.36� 1/2� 14� BC1UVINS1436 222. 252. 341.42� 1/2� 14� BC1UVINS1442 244. 280. 377.48� 1/2� 14� BC1UVINS1448 267. 306. 413.
15�h upper inside back insert, veneerFor use on 57�h and taller units withpass-through or reversed shelf storage below(compatible with all 15�h door kits)
18� 1/2� 15� BC1UVINS1518 180. 205. 277.24� 1/2� 15� BC1UVINS1524 183. 210. 281.30� 1/2� 15� BC1UVINS1530 201. 229. 308.36� 1/2� 15� BC1UVINS1536 222. 252. 341.42� 1/2� 15� BC1UVINS1542 244. 280. 377.48� 1/2� 15� BC1UVINS1548 267. 306. 413.60� 1/2� 15� BC1UVINS1560 289. 335. 453.72� 1/2� 15� BC1UVINS1572 293. 338. 458.
20�h upper inside back insert, veneerFor use on 57�h and taller units withpass-through or reversed shelf storage below(compatible with all 20�h door kits)
18� 1/2� 20� BC1UVINS2018 184. 212. 285.24� 1/2� 20� BC1UVINS2024 202. 231. 312.30� 1/2� 20� BC1UVINS2030 223. 255. 345.36� 1/2� 20� BC1UVINS2036 245. 281. 380.42� 1/2� 20� BC1UVINS2042 270. 308. 416.48� 1/2� 20� BC1UVINS2048 296. 340. 461.60� 1/2� 20� BC1UVINS2060 317. 366. 497.72� 1/2� 20� BC1UVINS2072 326. 374. 508.
22�h upper inside back insert, veneerFor use on 50�h unit reversal at worksurfaceheight.
18� 1/2� 22� BC1UVINS2218 186. 216. 291.24� 1/2� 22� BC1UVINS2224 205. 235. 319.30� 1/2� 22� BC1UVINS2230 226. 259. 349.36� 1/2� 22� BC1UVINS2236 248. 285. 386.42� 1/2� 22� BC1UVINS2242 273. 313. 423.48� 1/2� 22� BC1UVINS2248 299. 343. 466.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain direction is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
64
Upper Inside Back Inserts28�h, 29�h, 35�h and 36�h veneer
description w d h pattern no. V1 V2 V3
28�h upper inside back insert, veneerFor use on 50�h unit reversal at credenza height
18� 1/2� 28� BC1UVINS2818 $189. $221. $296.24� 1/2� 28� BC1UVINS2824 211. 240. 326.30� 1/2� 28� BC1UVINS2830 231. 265. 356.36� 1/2� 28� BC1UVINS2836 254. 293. 393.42� 1/2� 28� BC1UVINS2842 280. 320. 433.48� 1/2� 28� BC1UVINS2848 307. 353. 479.
29�h upper inside back insert, veneerFor use on 57�h unit reversal at worksurfaceheight
18� 1/2� 29� BC1UVINS2918 191. 223. 299.24� 1/2� 29� BC1UVINS2924 212. 244. 327.30� 1/2� 29� BC1UVINS2930 232. 269. 359.36� 1/2� 29� BC1UVINS2936 255. 295. 397.42� 1/2� 29� BC1UVINS2942 281. 323. 436.48� 1/2� 29� BC1UVINS2948 308. 354. 480.
35�h upper inside back insert, veneerFor use on 57�h unit reversal at credenza height
18� 1/2� 35� BC1UVINS3518 201. 229. 308.24� 1/2� 35� BC1UVINS3524 222. 252. 341.30� 1/2� 35� BC1UVINS3530 240. 276. 373.36� 1/2� 35� BC1UVINS3536 267. 306. 413.42� 1/2� 35� BC1UVINS3542 293. 338. 458.48� 1/2� 35� BC1UVINS3548 320. 370. 500.
36�h upper inside back insert, veneerFor use on 64�h unit reversal at worksurfaceheight
18� 1/2� 36� BC1UVINS3618 202. 231. 312.24� 1/2� 36� BC1UVINS3624 223. 255. 345.30� 1/2� 36� BC1UVINS3630 245. 281. 380.36� 1/2� 36� BC1UVINS3636 269. 307. 415.42� 1/2� 36� BC1UVINS3642 295. 339. 459.48� 1/2� 36� BC1UVINS3648 323. 373. 505.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain direction is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
65
Upper Inside Back Inserts42�h, 43�h and 49�h veneer
description w d h pattern no. V1 V2 V3
42�h upper inside back insert, veneerFor use on 64�h unit reversal at credenza height
18� 1/2� 42� BC1UVINS4218 $211. $240. $326.24� 1/2� 42� BC1UVINS4224 231. 265. 356.30� 1/2� 42� BC1UVINS4230 254. 293. 393.36� 1/2� 42� BC1UVINS4236 280. 320. 433.42� 1/2� 42� BC1UVINS4242 307. 353. 479.48� 1/2� 42� BC1UVINS4248 339. 389. 526.
43�h upper inside back insert, veneerFor use on 71�h unit reversal at worksurfaceheight
18� 1/2� 43� BC1UVINS4318 214. 246. 333.24� 1/2� 43� BC1UVINS4324 233. 270. 361.30� 1/2� 43� BC1UVINS4330 258. 296. 398.36� 1/2� 43� BC1UVINS4336 284. 327. 438.42� 1/2� 43� BC1UVINS4342 312. 358. 485.48� 1/2� 43� BC1UVINS4348 342. 393. 531.
49�h upper inside back insert, veneerFor use on 71�h unit reversal at credenza height
18� 1/2� 49� BC1UVINS4918 223. 255. 345.24� 1/2� 49� BC1UVINS4924 245. 281. 380.30� 1/2� 49� BC1UVINS4930 270. 308. 416.36� 1/2� 49� BC1UVINS4936 296. 340. 461.42� 1/2� 49� BC1UVINS4942 326. 374. 508.48� 1/2� 49� BC1UVINS4948 356. 412. 555.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain direction is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
66
Mid Inside Back Inserts57�h unit fabric
description w d h pattern no. 10 20 30 40
Mid inside back insert for 57�h unit, fabricreversal at worksurface height with15� upper storage
18� 1/2� 14� BC1MFINS1418 $139. $153. $161. $167.24� 1/2� 14� BC1MFINS1424 139. 153. 161. 167.30� 1/2� 14� BC1MFINS1430 145. 160. 167. 172.36� 1/2� 14� BC1MFINS1436 161. 174. 183. 187.42� 1/2� 14� BC1MFINS1442 164. 176. 185. 189.48� 1/2� 14� BC1MFINS1448 167. 180. 187. 195.60� 1/2� 14� BC1MFINS1460 181. 194. 203. 211.72� 1/2� 14� BC1MFINS1472 * * * *
Mid inside back insert for 57�h unit, fabricreversal at credenza height with15� upper storage
18� 1/2� 20� BC1MFINS2018 161. 174. 183. 187.24� 1/2� 20� BC1MFINS2024 161. 174. 183. 187.30� 1/2� 20� BC1MFINS2030 167. 180. 187. 195.36� 1/2� 20� BC1MFINS2036 185. 201. 211. 219.42� 1/2� 20� BC1MFINS2042 188. 205. 216. 223.48� 1/2� 20� BC1MFINS2048 195. 212. 223. 229.60� 1/2� 20� BC1MFINS2060 211. 227. 235. 245.72� 1/2� 20� BC1MFINS2072 * * * *
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts to not work onthe outside of either painted orfabric backs.
Template
67
Mid Inside Back Inserts64�h unit fabric
description w d h pattern no. 10 20 30 40
Mid inside back insert for 64�h unit, fabricreversal at worksurface height with15� upper storage
18� 1/2� 21� BC1MFINS2118 $161. $174. $183. $187.24� 1/2� 21� BC1MFINS2124 161. 174. 183. 187.30� 1/2� 21� BC1MFINS2130 167. 180. 187. 195.36� 1/2� 21� BC1MFINS2136 185. 201. 211. 219.42� 1/2� 21� BC1MFINS2142 188. 205. 216. 223.48� 1/2� 21� BC1MFINS2148 195. 212. 223. 229.60� 1/2� 21� BC1MFINS2160 211. 227. 235. 245.72� 1/2� 21� BC1MFINS2172 * * * *
Mid inside back insert for 64�h unit, fabricreversal at worksurface height with20� upper storage
18� 1/2� 16� BC1MFINS1618 145. 160. 167. 172.24� 1/2� 16� BC1MFINS1624 145. 160. 167. 172.30� 1/2� 16� BC1MFINS1630 153. 167. 174. 180.36� 1/2� 16� BC1MFINS1636 167. 180. 187. 195.42� 1/2� 16� BC1MFINS1642 171. 185. 191. 201.48� 1/2� 16� BC1MFINS1648 175. 188. 200. 205.60� 1/2� 16� BC1MFINS1660 188. 204. 214. 222.72� 1/2� 16� BC1MFINS1672 * * * *
Mid inside back insert for 64�h unit, fabricreversal at credenza height with15� upper storage
18� 1/2� 27� BC1MFINS2718 172. 186. 195. 203.24� 1/2� 27� BC1MFINS2724 172. 186. 195. 203.30� 1/2� 27� BC1MFINS2730 179. 191. 202. 208.36� 1/2� 27� BC1MFINS2736 205. 224. 233. 244.42� 1/2� 27� BC1MFINS2742 214. 229. 240. 248.48� 1/2� 27� BC1MFINS2748 221. 237. 248. 258.60� 1/2� 27� BC1MFINS2760 233. 252. 263. 273.72� 1/2� 27� BC1MFINS2772 * * * *
Mid inside back insert for 64�h unit, fabricreversal at credenza height with20� upper storage
18� 1/2� 22� BC1MFINS2218 165. 179. 186. 191.24� 1/2� 22� BC1MFINS2224 165. 179. 186. 191.30� 1/2� 22� BC1MFINS2230 171. 184. 191. 201.36� 1/2� 22� BC1MFINS2236 188. 204. 218. 224.42� 1/2� 22� BC1MFINS2242 194. 211. 222. 228.48� 1/2� 22� BC1MFINS2248 201. 219. 228. 234.60� 1/2� 22� BC1MFINS2260 216. 232. 244. 249.72� 1/2� 22� BC1MFINS2272 * * * *
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts to not work onthe outside of either painted orfabric backs.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
68
Mid Inside Back Inserts71�h unit fabric
description w d h pattern no. 10 20 30 40
Mid inside back insert for 71�h unit, fabricreversal at worksurface height with 15� upperstorage
18� 1/2� 28� BC1MFINS2818 $176. $189. $201. $208.24� 1/2� 28� BC1MFINS2824 176. 189. 201. 208.30� 1/2� 28� BC1MFINS2830 183. 197. 205. 214.36� 1/2� 28� BC1MFINS2836 212. 229. 238. 248.42� 1/2� 28� BC1MFINS2842 219. 234. 247. 254.48� 1/2� 28� BC1MFINS2848 226. 245. 254. 263.60� 1/2� 28� BC1MFINS2860 238. 259. 270. 277.72� 1/2� 28� BC1MFINS2872 * * * *
Mid inside back insert for 71�h unit, fabricreversal at worksurface height with 20� upperstorage
18� 1/2� 23� BC1MFINS2318 165. 179. 186. 191.24� 1/2� 23� BC1MFINS2324 165. 179. 186. 191.30� 1/2� 23� BC1MFINS2330 171. 185. 191. 201.36� 1/2� 23� BC1MFINS2336 194. 211. 222. 228.42� 1/2� 23� BC1MFINS2342 200. 216. 226. 232.48� 1/2� 23� BC1MFINS2348 204. 223. 231. 238.60� 1/2� 23� BC1MFINS2360 221. 235. 246. 254.72� 1/2� 23� BC1MFINS2372 * * * *
Mid inside back insert for 71�h unit, fabricreversal at credenza height with 15� upperstorage
18� 1/2� 34� BC1MFINS3418 200. 216. 226. 232.24� 1/2� 34� BC1MFINS3424 200. 216. 226. 232.30� 1/2� 34� BC1MFINS3430 204. 223. 232. 238.36� 1/2� 34� BC1MFINS3436 237. 258. 272. 281.42� 1/2� 34� BC1MFINS3442 247. 269. 280. 291.48� 1/2� 34� BC1MFINS3448 254. 275. 289. 298.60� 1/2� 34� BC1MFINS3460 270. 291. 302. 313.72� 1/2� 34� BC1MFINS3472 * * * *
Mid inside back insert for 71�h unit, fabricreversal at credenza height with 20� upperstorage
18� 1/2� 29� BC1MFINS2918 180. 194. 203. 211.24� 1/2� 29� BC1MFINS2924 180. 194. 203. 211.30� 1/2� 29� BC1MFINS2930 185. 202. 211. 219.36� 1/2� 29� BC1MFINS2936 218. 233. 245. 252.42� 1/2� 29� BC1MFINS2942 224. 244. 250. 261.48� 1/2� 29� BC1MFINS2948 231. 248. 260. 270.60� 1/2� 29� BC1MFINS2960 246. 263. 275. 284.72� 1/2� 29� BC1MFINS2972 * * * *
Order Code
Example:
Specification Information
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Application Notes
Inside back insert kits includefabric insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Inside back inserts to not work onthe outside of either painted orfabric backs.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
69
Mid Inside Back Inserts78�h unit fabric
description w d h pattern no. 10 20 30 40
Mid inside back insert for 78�h unit, fabricreversal at worksurface height with 20� upperstorage
18� 1/2� 30� BC1MFINS3018 $183. $197. $205. $214.24� 1/2� 30� BC1MFINS3024 183. 197. 205. 214.30� 1/2� 30� BC1MFINS3030 187. 204. 214. 222.36� 1/2� 30� BC1MFINS3036 221. 235. 248. 258.42� 1/2� 30� BC1MFINS3042 227. 246. 255. 267.48� 1/2� 30� BC1MFINS3048 233. 252. 265. 274.60� 1/2� 30� BC1MFINS3060 248. 269. 280. 289.72� 1/2� 30� BC1MFINS3072 * * * *
Mid inside back insert for 78�h unit, fabricreversal at credenza height with 20� upperstorage
18� 1/2� 36� BC1MFINS3618 205. 223. 232. 240.24� 1/2� 36� BC1MFINS3624 205. 223. 232. 240.30� 1/2� 36� BC1MFINS3630 214. 231. 240. 248.36� 1/2� 36� BC1MFINS3636 247. 269. 281. 292.42� 1/2� 36� BC1MFINS3642 255. 277. 289. 299.48� 1/2� 36� BC1MFINS3648 265. 285. 298. 308.60� 1/2� 36� BC1MFINS3660 280. 299. 313. 323.72� 1/2� 36� BC1MFINS3672 * * * *
Order Code
Example:
Specification Information
Fabric inside back inserts only workwith painted or fabric backs of thesame type and size unless insideinsert support kit is specified.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts to not work onthe outside of either painted orfabric backs.
*72�w fabric backs need to bequoted as special product due torailroading of fabric.
Template
70
Mid Inside Back Inserts57�h unit veneer
description w d h pattern no. V1 V2 V3
Mid inside back insert for 57�h unit, veneerreversal at worksurface height with 15� upperstorage
18� 1/2� 14� BC1MVINS1418 $218. $248. $337.24� 1/2� 14� BC1MVINS1424 237. 274. 370.30� 1/2� 14� BC1MVINS1430 261. 300. 405.36� 1/2� 14� BC1MVINS1436 288. 332. 445.42� 1/2� 14� BC1MVINS1442 315. 361. 490.48� 1/2� 14� BC1MVINS1448 347. 398. 540.60� 1/2� 14� BC1MVINS1460 405. 460. 584.72� 1/2� 14� BC1MVINS1472 453. 505. 629.
Mid inside back insert for 57�h unit, veneerreversal at credenza height with 15� upperstorage
18� 1/2� 20� BC1MVINS2018 223. 255. 345.24� 1/2� 20� BC1MVINS2024 245. 281. 380.30� 1/2� 20� BC1MVINS2030 270. 308. 416.36� 1/2� 20� BC1MVINS2036 296. 340. 461.42� 1/2� 20� BC1MVINS2042 326. 374. 508.48� 1/2� 20� BC1MVINS2048 356. 412. 555.60� 1/2� 20� BC1MVINS2060 401. 458. 601.72� 1/2� 20� BC1MVINS2072 447. 500. 642.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain pattern is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Template
71
Mid Inside Back Inserts64�h unit veneer
description w d h pattern no. V1 V2 V3
Mid inside back insert for 64�h unit, veneerreversal at worksurface height with 15� upperstorage
18� 1/2� 21� BC1MVINS2118 $226. $259. $349.24� 1/2� 21� BC1MVINS2124 247. 284. 383.30� 1/2� 21� BC1MVINS2130 273. 313. 423.36� 1/2� 21� BC1MVINS2136 298. 342. 464.42� 1/2� 21� BC1MVINS2142 332. 379. 512.48� 1/2� 21� BC1MVINS2148 360. 416. 564.60� 1/2� 21� BC1MVINS2160 390. 450. 609.72� 1/2� 21� BC1MVINS2172 397. 459. 615.
Mid inside back insert for 64�h unit, veneerreversal at worksurface height with 20� upperstorage
18� 1/2� 16� BC1MVINS1618 221. 250. 340.24� 1/2� 16� BC1MVINS1624 240. 276. 373.30� 1/2� 16� BC1MVINS1630 265. 305. 412.36� 1/2� 16� BC1MVINS1636 292. 337. 454.42� 1/2� 16� BC1MVINS1642 320. 370. 500.48� 1/2� 16� BC1MVINS1648 351. 403. 545.60� 1/2� 16� BC1MVINS1660 380. 436. 591.72� 1/2� 16� BC1MVINS1672 387. 445. 603.
Mid inside back insert for 64�h unit, veneerreversal at credenza height with 15� upperstorage
18� 1/2� 27� BC1MVINS2718 245. 281. 380.24� 1/2� 27� BC1MVINS2724 270. 308. 416.30� 1/2� 27� BC1MVINS2730 296. 340. 461.36� 1/2� 27� BC1MVINS2736 326. 374. 508.42� 1/2� 27� BC1MVINS2742 356. 412. 555.48� 1/2� 27� BC1MVINS2748 392. 454. 610.60� 1/2� 27� BC1MVINS2760 424. 489. 663.72� 1/2� 27� BC1MVINS2772 432. 496. 670.
Mid inside back insert for 64�h unit, veneerreversal at credenza height with 20� upperstorage
18� 1/2� 22� BC1MVINS2218 227. 260. 351.24� 1/2� 22� BC1MVINS2224 248. 285. 386.30� 1/2� 22� BC1MVINS2230 274. 314. 425.36� 1/2� 22� BC1MVINS2236 300. 347. 468.42� 1/2� 22� BC1MVINS2242 333. 382. 515.48� 1/2� 22� BC1MVINS2248 361. 417. 566.60� 1/2� 22� BC1MVINS2260 392. 456. 467.72� 1/2� 22� BC1MVINS2272 399. 462. 622.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain pattern is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Template
72
Mid Inside Back Inserts71�h unit veneer
description w d h pattern no. V1 V2 V3
Mid inside back insert for 71�h unit, veneerreversal at worksurface height with 15� upperstorage
18� 1/2� 28� BC1MVINS2818 $246. $282. $382.24� 1/2� 28� BC1MVINS2824 272. 310. 418.30� 1/2� 28� BC1MVINS2830 297. 341. 462.36� 1/2� 28� BC1MVINS2836 327. 376. 509.42� 1/2� 28� BC1MVINS2842 358. 413. 558.42� 1/2� 28� BC1MVINS2848 393. 456. 612.60� 1/2� 28� BC1MVINS2860 428. 491. 665.72� 1/2� 28� BC1MVINS2872 434. 500. 672.
Mid inside back insert for 71�h unit, veneerreversal at worksurface height with 20� upperstorage
18� 1/2� 23� BC1MVINS2318 228. 261. 353.24� 1/2� 23� BC1MVINS2324 249. 288. 387.30� 1/2� 23� BC1MVINS2330 275. 315. 428.36� 1/2� 23� BC1MVINS2336 302. 349. 473.42� 1/2� 23� BC1MVINS2342 335. 383. 517.48� 1/2� 23� BC1MVINS2348 366. 420. 569.60� 1/2� 23� BC1MVINS2360 396. 459. 617.72� 1/2� 23� BC1MVINS2372 402. 465. 628.
Mid inside back insert for 71�h unit, veneerreversal at credenza height with 15� upperstorage
18� 1/2� 34� BC1MVINS3418 272. 310. 418.24� 1/2� 34� BC1MVINS3424 297. 341. 462.30� 1/2� 34� BC1MVINS3430 327. 376. 509.36� 1/2� 34� BC1MVINS3436 359. 415. 560.42� 1/2� 34� BC1MVINS3442 396. 458. 614.48� 1/2� 34� BC1MVINS3448 435. 501. 675.60� 1/2� 34� BC1MVINS3460 473. 543. 736.72� 1/2� 34� BC1MVINS3472 480. 553. 746.
Mid inside back insert for 71�h unit, veneerreversal at credenza height with 20� upperstorage
18� 1/2� 29� BC1MVINS2918 247. 284. 383.24� 1/2� 29� BC1MVINS2924 273. 313. 423.30� 1/2� 29� BC1MVINS2930 298. 342. 464.36� 1/2� 29� BC1MVINS2936 330. 377. 510.42� 1/2� 29� BC1MVINS2942 360. 416. 564.48� 1/2� 29� BC1MVINS2948 397. 459. 615.60� 1/2� 29� BC1MVINS2960 431. 494. 670.72� 1/2� 29� BC1MVINS2972 436. 505. 678.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain pattern is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back insert kits includeveneer insert(s) that may be placedon the interior of a back matchingthe type and size of the insertspecified.
Template
73
Mid Inside Back Inserts78�h unit veneer
description w d h pattern no. V1 V2 V3
Mid inside back insert for 78�h unit, veneerreversal at worksurface height with 20� upperstorage
18� 1/2� 30� BC1MVINS3018 $249. $288. $387.24� 1/2� 30� BC1MVINS3024 275. 315. 428.30� 1/2� 30� BC1MVINS3030 300. 347. 468.36� 1/2� 30� BC1MVINS3036 335. 383. 517.42� 1/2� 30� BC1MVINS3042 363. 418. 567.48� 1/2� 30� BC1MVINS3048 401. 464. 625.60� 1/2� 30� BC1MVINS3060 434. 501. 678.72� 1/2� 30� BC1MVINS3072 439. 510. 686.
Mid inside back insert for 78�h unit, veneerreversal at credenza height with 20� upperstorage
18� 1/2� 36� BC1MVINS3618 274. 314. 425.24� 1/2� 36� BC1MVINS3624 300. 347. 468.30� 1/2� 36� BC1MVINS3630 333. 382. 515.36� 1/2� 36� BC1MVINS3636 361. 417. 566.42� 1/2� 36� BC1MVINS3642 399. 462. 622.48� 1/2� 36� BC1MVINS3648 438. 509. 685.60� 1/2� 36� BC1MVINS3660 479. 548. 746.72� 1/2� 36� BC1MVINS3672 485. 558. 755.
Order Code
Example:
Specification Information
Veneer inside back inserts onlywork with painted backs of the sametype and size unless inside insertsupport kit is specified.
Grain pattern is vertical.
Application Notes
An inside insert support kit(BC1FINSCLIP, $55 list) isavailable to support an inside insertfrom the back of a worksurface shelfor veneer standard shelf.
Inside back inserts do not work onthe outside of either painted orfabric backs.
Template
74
Drawer Kitsfile, box/box, box/file, file/file and box/box/file, Steel and Veneer
description w d h pattern no. P1 P2 P3 V1 V2 V3
File drawer kitfills 16�h unit opening
18� 15� 121/8� BD2FDK18N $491. $542. $567. $862. $991. $1,338.24� 15� 121/8� BD2FDK24N 506. 555. 579. 883. 1,015. 1,370.30� 15� 121/8� BD2FDK30N 531. 585. 612. 930. 1,071. 1,446.36� 15� 121/8� BD2FDK36N 539. 591. 617. 942. 1,084. 1,464.42� 15� 121/8� BD2FDK42N 569. 629. 657. 996. 1,146. 1,544.48� 15� 121/8� BD2FDK48N 604. 662. 691. 1,052. 1,208. 1,635.
Box/Box drawer kitfills 16�h unit opening
18� 15� 121/8� BD2BBDK18N 681. 750. 783. 1,193. 1,372. 1,851.24� 15� 121/8� BD2BBDK24N 713. 784. 822. 1,247. 1,436. 1,939.30� 15� 121/8� BD2BBDK30N 739. 813. 849. 1,293. 1,485. 2,010.36� 15� 121/8� BD2BBDK36N 763. 838. 877. 1,336. 1,534. 2,071.42� 15� 121/8� BD2BBDK42N 811. 894. 935. 1,421. 1,634. 2,203.48� 15� 121/8� BD2BBDK48N 873. 959. 1,003. 1,529. 1,756. 2,370.
Box/file drawer kitfills credenza height opening
18� 15� 187/8� BD2BFDK18N 683. 751. 784. 1,188. 1,364. 1,842.24� 15� 187/8� BD2BFDK24N 707. 777. 811. 1,225. 1,408. 1,901.30� 15� 187/8� BD2BFDK30N 730. 803. 841. 1,276. 1,466. 1,977.36� 15� 187/8� BD2BFDK36N 757. 832. 869. 1,304. 1,500. 2,023.42� 15� 187/8� BD2BFDK42N 824. 907. 949. 1,328. 1,530. 2,063.48� 15� 187/8� BD2BFDK48N 857. 943. 988. 1,380. 1,584. 2,141.
File/File drawer kitfills worksurface height opening
18� 15� 243/4� BD2FFDK18N 708. 778. 817. 1,238. 1,425. 1,924.24� 15� 243/4� BD2FFDK24N 733. 809. 845. 1,280. 1,470. 1,986.30� 15� 243/4� BD2FFDK30N 763. 841. 878. 1,331. 1,531. 2,064.36� 15� 243/4� BD2FFDK36N 791. 870. 909. 1,370. 1,577. 2,124.42� 15� 243/4� BD2FFDK42N 866. 953. 996. 1,409. 1,621. 2,189.48� 15� 243/4� BD2FFDK48N 900. 993. 1,038. 1,483. 1,707. 2,305.
Box/Box drawer kitfills worksurface height opening
18� 15� 243/4� BD2BBFDK18N 943. 1,040. 1,085. 1,436. 1,653. 2,232.24� 15� 243/4� BD2BBFDK24N 972. 1,071. 1,119. 1,481. 1,704. 2,297.30� 15� 243/4� BD2BBFDK30N 1,006. 1,110. 1,159. 1,537. 1,768. 2,386.36� 15� 243/4� BD2BBFDK36N 1,047. 1,148. 1,200. 1,587. 1,823. 2,463.42� 15� 243/4� BD2BBFDK42N 1,120. 1,234. 1,287. 1,630. 1,870. 2,527.48� 15� 243/4� BD2BBFDK48N 1,160. 1,279. 1,336. 1,707. 1,965. 2,650.
Order Code
Example:
Specification Information
Drawer fronts are available instandard paint or V1 finishes.
To specify locking drawers, replacethe ‘‘N’’ in the pattern number withan ‘‘L’’ and add $40 to the list price.Lock location is centeredhorizontally.
Drawer kits include assembleddrawer bodies with fronts, pull kitand side assembly kit.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Steel and Veneer drawer frontsreceive 3� pulls. Laminate drawerfronts receive 5� pulls.
Steel and Veneer drawer kits featurea gap below the front and can beused with kick plates (specifiedseparately). Laminate drawer kitsfeature to-the-floor fronts and cannot be used with kick plates below.
Application Notes
Drawer kits may only be placedunder worksurface height (credenzaheight for box/file kit).
All drawer kits include safety cablethat allows only one drawer to beopened at one time.
Drawer kits must always bepositioned under a work surfaceshelf.
Veneer grain direction is vertical onall drawer fronts.
Template
75
Drawer Kitsfile, box/box, box/file, file/file and box/box/file, Laminate
description w d h pattern no. L1 L2
File drawer kitfills 16�h unit opening
18� 15� 121/8� BD2FDK18NL $423. $450.24� 15� 121/8� BD2FDK24NL 441. 478.30� 15� 121/8� BD2FDK30NL 479. 527.36� 15� 121/8� BD2FDK36NL 498. 560.42� 15� 121/8� BD2FDK42NL 504. 573.48� 15� 121/8� BD2FDK48NL 540. 612.
File drawer kit, Bottom positionfills 16�h unit opening
18� 15� 121/8� BD2FDKB18NL 423. 450.24� 15� 121/8� BD2FDKB24NL 441. 478.30� 15� 121/8� BD2FDKB30NL 479. 527.36� 15� 121/8� BD2FDKB36NL 498. 560.42� 15� 121/8� BD2FDKB42NL 504. 573.48� 15� 121/8� BD2FDKB48NL 540. 612.
Box/Box drawer kitfills 16�h unit opening
18� 15� 121/8� BD2BBDK18NL 562. 593.24� 15� 121/8� BD2BBDK24NL 600. 637.30� 15� 121/8� BD2BBDK30NL 641. 692.36� 15� 121/8� BD2BBDK36NL 657. 723.42� 15� 121/8� BD2BBDK42NL 677. 754.48� 15� 121/8� BD2BBDK48NL 725. 803.
Box/file drawer kitfills credenza height opening
18� 15� 187/8� BD2BFDK18NL 749. 786.24� 15� 187/8� BD2BFDK24NL 784. 834.30� 15� 187/8� BD2BFDK30NL 834. 899.36� 15� 187/8� BD2BFDK36NL 857. 939.42� 15� 187/8� BD2BFDK42NL 880. 975.48� 15� 187/8� BD2BFDK48NL 939. 1,041.
File/File drawer kitfills worksurface height opening
18� 15� 243/4� BD2FFDK18NL 834. 888.24� 15� 243/4� BD2FFDK24NL 869. 937.36� 15� 243/4� BD2FFDK30NL 940. 1,028.36� 15� 243/4� BD2FFDK36NL 974. 1,089.42� 15� 243/4� BD2FFDK42NL 985. 1,115.48� 15� 243/4� BD2FFDK48NL 1,051. 1,187.
Box/Box drawer kitfills worksurface height opening
18� 15� 243/4� BD2BBFDK18NL 923. 978.24� 15� 243/4� BD2BBFDK24NL 973. 1,041.30� 15� 243/4� BD2BBFDK30NL 1,043. 1,132.36� 15� 243/4� BD2BBFDK36NL 1,075. 1,191.42� 15� 243/4� BD2BBFDK42NL 1,098. 1,229.48� 15� 243/4� BD2BBFDK48NL 1,171. 1,306.
Order Code
Example:
Specification Information
Drawer fronts are available instandard paint or V1 finishes.
To specify locking drawers, replacethe ‘‘N’’ in the pattern number withan ‘‘L’’ and add $40 to the list price.Lock location is centeredhorizontally.
Drawer kits include assembleddrawer bodies with fronts, pull kitand side assembly kit.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Steel and Veneer drawer frontsreceive 3� pulls. Laminate drawerfronts receive 5� pulls.
Steel and Veneer drawer kits featurea gap below the front and can beused with kick plates (specifiedseparately). Laminate drawer kitsfeature to-the-floor fronts and cannot be used with kick plates below.
Application Notes
Drawer kits may only be placedunder worksurface height (credenzaheight for box/file kit).
All drawer kits include safety cablethat allows only one drawer to beopened at one time.
Drawer kits must always bepositioned under a work surfaceshelf.
Template
76
Sliding Door Kitsfull height
description w d h pattern no. P1 P2 P3 glass
16�h sliding door kit, full height 30� 3/4� 16� BD1FSDK1630N $569. $628. $656. $587.36� 3/4� 16� BD1FSDK1636N 587. 649. 679. 625.42� 3/4� 16� BD1FSDK1642N 597. 657. 689. 660.48� 3/4� 16� BD1FSDK1648N 607. 665. 697. 700.
22�h sliding door kit, full height 30� 3/4� 22� BD1FSDK2230N 575. 632. 660. 593.36� 3/4� 22� BD1FSDK2236N 593. 654. 686. 630.42� 3/4� 22� BD1FSDK2242N 604. 662. 694. 665.48� 3/4� 22� BD1FSDK2248N 611. 671. 704. 707.
25�h Antenna sliding door kit, full height 30� 3/4� 25� BD1FSDK2530N 587. 648. 674. 664.36� 3/4� 25� BD1FSDK2536N 627. 690. 720. 726.42� 3/4� 25� BD1FSDK2542N 633. 697. 731. 774.48� 3/4� 25� BD1FSDK2548N 643. 707. 739. 821.
28�h sliding door kit, full height 29� 3/4� 28� BD1FSDK2829N 587. 648. 674. 664.30� 3/4� 28� BD1FSDK2830N 587. 648. 674. 664.36� 3/4� 28� BD1FSDK2836N 627. 690. 720. 726.42� 3/4� 28� BD1FSDK2842N 633. 697. 731. 774.48� 3/4� 28� BD1FSDK2848N 643. 707. 739. 821.
42�h sliding door kit, full height 30� 3/4� 42� BD1FSDK4230N 623. 689. 719. 877.36� 3/4� 42� BD1FSDK4236N 679. 746. 780. 944.42� 3/4� 42� BD1FSDK4242N 687. 751. 788. 1,014.48� 3/4� 42� BD1FSDK4248N 740. 817. 851. 1,079.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or etched powder glass.
To specify locking sliding doors,replace the ‘‘N’’ in the patternnumber with an ‘‘L’’ and add $20 tothe list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Application Notes
Full height sliding door kits includetwo doors, top sliding rail and baseslilding rail.
Base sliding rail matches the heightof the base giving the appearance ofa base kit plate. This should beconsidered when planning the baseappearance of adjacent units.
Full height sliding door kits mayonly be utilized in cabinets of thesame height.
Full height sliding door kits attachto the top and base of a singlesection. Shelves must be orderedseparately.
Worksurface shelves do not workbehind sliding doors.
Template
77
Sliding Door Kitsfull height
description w d h pattern no. P1 P2 P3 glass
50�h sliding door kit, full height 30� 3/4� 50� BD1FSDK5030N $671. $740. $775. $940.36� 3/4� 50� BD1FSDK5036N 683. 748. 782. 1,021.42� 3/4� 50� BD1FSDK5042N 735. 806. 844. 1,100.48� 3/4� 50� BD1FSDK5048N 742. 818. 852. 1,182.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or etched powder glass.
To specify locking sliding doors,replace the ‘‘N’’ in the patternnumber with an ‘‘L’’ and add $20 tothe list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Application Notes
Full height sliding door kits includetwo doors, top sliding rail and baseslilding rail.
Base sliding rail matches the heightof the base giving the appearance ofa base kit plate. This should beconsidered when planning the baseappearance of adjacent units.
Full height sliding door kits mayonly be utilized in cabinets of thesame height.
Full height sliding door kits attachto the top and base of a singlesection. Shelves must be orderedseparately.
Worksurface shelves do not workbehind sliding doors.
Template
78
Sliding Door Kitstop position and bottom position
description w d h pattern no. P1 P2 P3 glass
15�h sliding door kit, top position 30� 3/4� 15� BD1TSDK1530N $653. $717. $749. $658.36� 3/4� 15� BD1TSDK1536N 666. 737. 770. 688.42� 3/4� 15� BD1TSDK1542N 697. 765. 801. 736.48� 3/4� 15� BD1TSDK1548N 705. 775. 809. 764.60� 3/4� 15� BD1TSDK1560N 653. 717. 749. 750.72� 3/4� 15� BD1TSDK1572N 658. 725. 757. 758.
20�h sliding door kit, top position 30� 3/4� 20� BD1TSDK2030N 673. 743. 777. 698.36� 3/4� 20� BD1TSDK2036N 700. 773. 806. 742.42� 3/4� 20� BD1TSDK2042N 720. 793. 826. 791.48� 3/4� 20� BD1TSDK2048N 727. 800. 836. 827.60� 3/4� 20� BD1TSDK2060N 709. 781. 818. 846.72� 3/4� 20� BD1TSDK2072N 716. 788. 823. 852.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or etched powder glass.
To specify locking sliding doors,replace the ‘‘N’’ in the patternnumber with an ‘‘L’’ and add $20 tothe list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Application Notes
Top position sliding door kitincludes two doors, top sliding railand lower sliding rail.
Bottom position sliding door kitincludes two doors, upper slidingrail, and base sliding rail. Veneer orsteel top shelf must be orderedseparately.
Top position sliding door kit onlyworks in the top position of aTemplate case.
Locking not available in 60� or 72�wide door kits.
Bottom position sliding door kitprovides hardware to place a slidingdoor kit in a taller case when apass-through or open shelf isrequired above the sliding door kit.
Bottom position sliding door kitsmay not be installed below a back,hinged doors or another sliding doorkit.
Shelves must be orderedseparately.
Template
79
Hinged Door Kits15�h, 20�h, 28�h and 42�h
description w d h pattern no. P1 P2 P3 L1 L2 V1 V2 V3
15�h hinge door kit 24� 3/4� 15� BD1FHDK1524(L/R)N $447. $490. $512. $518. $599. $807.30� 3/4� 15� BD1FHDK1530N 722. 794. 828. 820. 941. 1,271.36� 3/4� 15� BD1FHDK1536N 740. 812. 849. 848. 973. 1,318.42� 3/4� 15� BD1FHDK1542N 749. 824. 862. 876. 1,007. 1,359.48� 3/4� 15� BD1FHDK1548N 769. 844. 884. 917. 1,055. 1,424.
20�h hinge door kit 24� 3/4� 20� BD1FHDK2024(L/R)N 464. 511. 534. 545. 627. 846.30� 3/4� 20� BD1FHDK2030N 746. 821. 858. 849. 975. 1,320.36� 3/4� 20� BD1FHDK2036N 773. 847. 886. 875. 1,006. 1,358.42� 3/4� 20� BD1FHDK2042N 785. 864. 903. 921. 1,064. 1,430.48� 3/4� 20� BD1FHDK2048N 809. 890. 929. 942. 1,084. 1,463.
28�h hinge door kit 18� 3/4� 28� BD1FHDK2818(L/R)N 363. 402. 420. 217. 333. 438. 504. 679.24� 3/4� 28� BD1FHDK2824(L/R)N 363. 402. 420. 239. 380. 465. 536. 725.30� 3/4� 28� BD1FHDK2830N 681. 748. 783. 415. 620. 773. 886. 1,196.36� 3/4� 28� BD1FHDK2836N 681. 749. 784. 436. 665. 794. 914. 1,233.42� 3/4� 28� BD1FHDK2842N 683. 750. 785. 458. 713. 824. 949. 1,280.48� 3/4� 28� BD1FHDK2848N 683. 750. 785. 478. 759. 847. 972. 1,315.
42�h hinge door kit 15� 3/4� 42� BD1FHDK4215(L/R)N 382. 420. 439. 244. 383. 448. 513. 692.18� 3/4� 42� BD1FHDK4218(L/R)N 399. 440. 460. 260. 424. 469. 542. 732.24� 3/4� 42� BD1FHDK4224(L/R)N 433. 475. 500. 294. 492. 513. 589. 798.30� 3/4� 42� BD1FHDK4230N 733. 803. 842. 484. 767. 827. 951. 1,285.36� 3/4� 42� BD1FHDK4236N 755. 832. 866. 521. 848. 861. 990. 1,339.42� 3/4� 42� BD1FHDK4242N 794. 874. 911. 572. 968. 905. 1,043. 1,406.48� 3/4� 42� BD1FHDK4248N 841. 922. 966. 588. 986. 969. 1,116. 1,505.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or V1 finishes.
Hinge door kits include door(s), pullkit and hinge kit.
To specify locking doors, replace the‘‘N’’ in the pattern number with an‘‘L’’ and add $20 to the list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Steel and Veneer drawer frontsreceive 2� pulls. Laminate drawerfronts receive 5� pulls.
28� and taller Steel and Veneerhinge door kits feature a gap belowthe front and can be used with kickplates (specified separately). 28�and taller Laminate hinge door kitsfeature to-the-floor fronts and cannot be used with kick plates below.
Application Notes
15�w, 18�w and 24�w door kits comeas single door kits.
Door hand for 15�w, 18�w and 24�wdetermined by hinge location.
28�h and taller hinge door kits aredesigned to fit in an opening fromthe top of a base to the underside ofa top or worksurface shelf.
15�h and 20�h hinge door kits aredesigned to be positioned at the topof a cabinet opening to function asan overhead unit.
Veneer grain direction is vertical onall hinge doors.
Shelves must be orderedseparately.
Template
80
Hinged Door Kits50�h, 57�h and 64�h
description w d h pattern no. P1 P2 P3 L1 L2 V1 V2 V3
50�h hinge door kit 15� 3/4� 50� BD1FHDK5015(L/R)N $382. $420. $439. $249. $391. $461. $531. $720.18� 3/4� 50� BD1FHDK5018(L/R)N 401. 442. 461. 292. 489. 492. 566. 765.24� 3/4� 50� BD1FHDK5024(L/R)N 434. 476. 500. 324. 563. 539. 617. 836.30� 3/4� 50� BD1FHDK5030N 733. 805. 842. 498. 782. 874. 1,004. 1,357.36� 3/4� 50� BD1FHDK5036N 763. 841. 878. 584. 981. 911. 1,048. 1,415.42� 3/4� 50� BD1FHDK5042N 795. 875. 915. 588. 986. 963. 1,106. 1,493.48� 3/4� 50� BD1FHDK5048N 824. 907. 949. 649. 1,124. 1,021. 1,175. 1,586.
57�h hinge door kit 15� 3/4� 57� BD1FHDK5715(L/R)N 385. 425. 443. 291. 460. 489. 562. 757.18� 3/4� 57� BD1FHDK5718(L/R)N 401. 443. 462. 303. 515. 517. 594. 805.24� 3/4� 57� BD1FHDK5724(L/R)N 434. 477. 501. 361. 641. 570. 658. 889.30� 3/4� 57� BD1FHDK5730N 734. 805. 843. 580. 920. 903. 1,042. 1,404.36� 3/4� 57� BD1FHDK5736N 765. 842. 879. 608. 1,029. 962. 1,105. 1,492.42� 3/4� 57� BD1FHDK5742N 797. 876. 916. 652. 1,129. 1,026. 1,181. 1,592.48� 3/4� 57� BD1FHDK5748N 827. 910. 951. 723. 1,279. 1,071. 1,233. 1,663.
64�h hinge door kit 15� 3/4� 64� BD1FHDK6415(L/R)N 398. 438. 459. 334. 540. 516. 592. 801.18� 3/4� 64� BD1FHDK6418(L/R)N 413. 457. 477. 363. 609. 548. 631. 851.24� 3/4� 64� BD1FHDK6424(L/R)N 447. 491. 512. 413. 720. 610. 698. 945.30� 3/4� 64� BD1FHDK6430N 758. 835. 874. 668. 1,078. 972. 1,120. 1,511.36� 3/4� 64� BD1FHDK6436N 789. 869. 909. 727. 1,218. 1,027. 1,182. 1,597.42� 3/4� 64� BD1FHDK6442N 822. 903. 945. 786. 1,352. 1,098. 1,261. 1,705.48� 3/4� 64� BD1FHDK6448N 853. 938. 979. 825. 1,441. 1,149. 1,321. 1,782.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or V1 finishes.
Hinge door kits include door(s), pullkit and hinge kit.
To specify locking doors, replace the‘‘N’’ in the pattern number with an‘‘L’’ and add $20 to the list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Steel and Veneer drawer frontsreceive 2� pulls. Laminate drawerfronts receive 5� pulls.
28� and taller Steel and Veneerhinge door kits feature a gap belowthe front and can be used with kickplates (specified separately). 28�and taller Laminate hinge door kitsfeature to-the-floor fronts and cannot be used with kick plates below.
Application Notes
15�w, 18�w and 24�w door kits comeas single door kits.
Door hand for 15�w, 18�w and 24�wdetermined by hinge location.
28�h and taller hinge door kits aredesigned to fit in an opening fromthe top of a base to the underside ofa top or worksurface shelf.
Veneer grain direction is vertical onall hinge doors..
Template
81
Hinged Door Kits71�h and 78�h
description w d h pattern no. P1 P2 P3 L1 L2 V1 V2 V3
71�h hinge door kit 15� 3/4� 71� BD1FHDK7115(L/R)N $461. $508. $529. $354. $586. $539. $617. $836.18� 3/4� 71� BD1FHDK7118(L/R)N 515. 567. 592. 395. 644. 567. 653. 884.24� 3/4� 71� BD1FHDK7124(L/R)N 608. 666. 696. 438. 777. 634. 732. 987.30� 3/4� 71� BD1FHDK7130N 930. 1,023. 1,071. 709. 1,171. 1,007. 1,157. 1,560.36� 3/4� 71� BD1FHDK7136N 980. 1,078. 1,130. 791. 1,286. 1,085. 1,245. 1,685.42� 3/4� 71� BD1FHDK7142N 1,038. 1,142. 1,192. 828. 1,446. 1,143. 1,314. 1,770.48� 3/4� 71� BD1FHDK7148N 1,163. 1,283. 1,340. 876. 1,552. 1,199. 1,380. 1,862.
78�h hinge door kit 18� 3/4� 78� BD1FHDK7818(L/R)N 540. 592. 618. 422. 709. 612. 704. 951.24� 3/4� 78� BD1FHDK7824(L/R)N 643. 706. 739. 491. 873. 686. 786. 1,066.30� 3/4� 78� BD1FHDK7830N 975. 1,075. 1,124. 783. 1,284. 1,077. 1,241. 1,675.36� 3/4� 78� BD1FHDK7836N 1,029. 1,133. 1,187. 843. 1,419. 1,161. 1,339. 1,806.42� 3/4� 78� BD1FHDK7842N 1,053. 1,158. 1,210. 926. 1,612. 1,229. 1,412. 1,904.48� 3/4� 78� BD1FHDK7848N 1,236. 1,361. 1,421. 984. 1,746. 1,290. 1,482. 2,002.
Order Code
Example:
Specification Information
Door fronts are available in standardpaint or V1 finishes.
Hinge door kits include door(s), pullkit and hinge kit.
To specify locking doors, replace the‘‘N’’ in the pattern number with an‘‘L’’ and add $20 to the list price.
Lock housings are available ineither black (B) or chrome (CH). Ifordering key-alike, remember toorder cores in a matching finish.
Steel and Veneer drawer frontsreceive 2� pulls. Laminate drawerfronts receive 5� pulls.
28� and taller Steel and Veneerhinge door kits feature a gap belowthe front and can be used with kickplates (specified separately). 28�and taller Laminate hinge door kitsfeature to-the-floor fronts and cannot be used with kick plates below.
Application Notes
15�w, 18�w and 24�w door kits comeas single door kits.
Door hand for 15�w, 18�w and 24�wdetermined by hinge location.
28�h and taller hinge door kits aredesigned to fit in an opening fromthe top of a base to the underside ofa top or worksurface shelf.
Veneer grain direction is vertical onall hinge doors.
Template
82
Standard and Slotted Shelves
description w d h pattern no. P1 P2 P3 V1 V2 V3
Shelf kit, single 15� 13� 11/16� BC1SH15(S/V) $74. $79. $81. $386. $443. $601.18� 13� 11/16� BC1SH18(S/V) 79. 87. 92. 391. 453. 609.23� 13� 11/16� BC1SH23(S/V) 96. 104. 111. 403. 466. 629.24� 13� 11/16� BC1SH24(S/V) 96. 104. 111. 403. 466. 629.29� 13� 11/16� BC1SH29(S/V) 104. 114. 122. 417. 481. 650.30� 13� 11/16� BC1SH30(S/V) 104. 114. 122. 418. 484. 653.36� 13� 11/16� BC1SH36(S/V) 112. 124. 128. 432. 496. 670.42� 13� 11/16� BC1SH42(S/V) 126. 138. 144. 443. 511. 688.48� 13� 11/16� BC1SH48(S/V) 126. 139. 145. 465. 532. 719.60� 13� 11/16� BC1SH60(S/V) 194. 214. 224. 513. 589. 802.72� 13� 11/16� BC1SH72(S/V) 202. 222. 231. 520. 601. 809.
Shelf kit, package of 5 15� 13� 11/16� BC1SH515(S/V) 347. 382. 398. 1,275. 1,465. 1,976.18� 13� 11/16� BC1SH518(S/V) 382. 417. 436. 1,304. 1,500. 2,023.23� 13� 11/16� BC1SH523(S/V) 465. 512. 532. 1,373. 1,579. 2,132.24� 13� 11/16� BC1SH524(S/V) 465. 512. 532. 1,379. 1,583. 2,138.29� 13� 11/16� BC1SH529(S/V) 512. 564. 587. 1,439. 1,656. 2,235.30� 13� 11/16� BC1SH530(S/V) 513. 564. 587. 1,446. 1,665. 2,246.36� 13� 11/16� BC1SH536(S/V) 548. 606. 631. 1,504. 1,730. 2,336.42� 13� 11/16� BC1SH542(S/V) 616. 680. 711. 1,560. 1,798. 2,427.48� 13� 11/16� BC1SH548(S/V) 621. 681. 712. 1,672. 1,924. 2,596.60� 13� 11/16� BC1SH560(S/V) 980. 1,079. 1,130. 1,901. 2,189. 2,959.72� 13� 11/16� BC1SH572(S/V) 990. 1,088. 1,138. 1,907. 2,196. 2,965.
Slotted shelf kit 23� 13� 11/16� BC1SSHK23 160. 174. 183. n/a24� 13� 11/16� BC1SSHK24 160. 174. 183. n/a29� 13� 11/16� BC1SSHK29 176. 194. 203. n/a30� 13� 11/16� BC1SSHK30 176. 194. 203. n/a36� 13� 11/16� BC1SSHK36 216. 235. 247. n/a42� 13� 11/16� BC1SSHK42 233. 258. 270. n/a48� 13� 11/16� BC1SSHK48 237. 261. 274. n/a
Order Code
Example:
Specification Information
Steel shelf includes shelf bracketsin matching paint finish.
Specify veneer finish for veneershelf as well as paint finish forveneer shelf brackets.
Application Notes
Shelves are non-handed andnon-sided for simple specificationand installation.
Each shelf includes a pair ofnon-handed hanging brackets.
Slotted shelf includes a slotted steelshelf and slotted shelf backdesigned to accept slotted shelfpartitions (ordered separately)
Template
83
Coat Rod Shelf
description w d h pattern no. P1 P2 P3
Coat Rod Shelf 24� 13� 11/13� BC1CSH24 $172. $188. $200.30� 13� 11/13� BC1CSH30 185. 204. 212.36� 13� 11/13� BC1CSH36 201. 221. 229.42� 13� 11/13� BC1CSH42 252. 276. 291.48� 13� 11/13� BC1CSH48 270. 297. 310.
Order Code
Example:
Specification Information
Coat Rod Shelf includes shelfbrackets in matching paint finish.
Coat rod is painted black.
Application Notes
Coat rod shelf provides afront-to-back coat rod for use withstandard coat hangers (notincluded).
24�w, 30�w and 36�w shelvesinclude a single, centered coat rod.42�w and 48�w shelves include twocoat rods positioned in from the endor mid panel at an equal distance.
Each coat rod provides 12� ofhanging depth.
Coat rod shelves are non-handedand non-sided and may be accessedfrom either side of the cabinet.
Template
84
Worksurface Shelvessingle and double sided
description w d h pattern no. L1 L2 V1 V2 V3
Worksurface shelf, single sidedfor use where back side of worksurface shelf iscovered by a back
18� 14� 11/4� BC1WSHK118(L/V) $180. $215. $382. $438. $589.24� 14� 11/4� BC1WSHK124(L/V) 203. 254. 392. 454. 611.30� 14� 11/4� BC1WSHK130(L/V) 222. 291. 403. 467. 629.36� 14� 11/4� BC1WSHK136(L/V) 267. 369. 415. 479. 644.42� 14� 11/4� BC1WSHK142(L/V) 273. 377. 427. 488. 658.48� 14� 11/4� BC1WSHK148(L/V) 280. 384. 438. 503. 681.60� 14� 11/4� BC1WSHK160(L/V) 308. 412. 466. 530. 707.72� 14� 11/4� BC1WSHK172(L/V) 320. 427. 480. 543. 720.
Worksurface shelf, double sidedfor use when there is a pass-throughlocated directly above the worksurface shelf.
18� 15� 11/4� BC1WSHK218(L/V) 184. 219. 377. 434. 584.24� 15� 11/4� BC1WSHK224(L/V) 206. 258. 386. 443. 603.30� 15� 11/4� BC1WSHK230(L/V) 225. 295. 397. 458. 616.36� 15� 11/4� BC1WSHK236(L/V) 271. 373. 410. 469. 632.42� 15� 11/4� BC1WSHK242(L/V) 276. 381. 420. 482. 650.48� 15� 11/4� BC1WSHK248(L/V) 284. 387. 434. 497. 670.60� 15� 11/4� BC1WSHK260(L/V) 312. 415. 459. 526. 698.72� 15� 11/4� BC1WSHK272(L/V) 324. 431. 475. 539. 712.
Order Code
Example:
Specification Information
Worksurface shelves are availablein laminate or veneer only and shipwith a pair of black brackets forplacement at either worksurfaceheight or credenza height.
L1 laminate colors include:114-Folkstone Grey117-Soft Grey118-Bright White119-Pumice
L2 finishes include all otherstandard Knoll core laminatefinishes.
Application Notes
Worksurface shelves are 11/4� thickto match thickness of standardTemplate or matching systemworksurfaces.
Worksurface shelf is required forattachment of perpendicularworksurface.
Worksurface shelf must be utilizedwhen supporting a perpendicularworksurface utilizing a credenzaspacer.
Template
85
Upper Shelf Kit, 15�h and 20�h, steelfor 60�w and 72�w sections
description w d h pattern no. P1 P2 P3
15�h upper shelf kitIncludes one steel shelf and one center locatedsteel structural septum
60� 15� BC2USK1560(S/L/V) $382. $420. $438.72� 15� BC2USK1572(S/L/V) 387. 428. 447.
20�h upper shelf kitIncludes two steel shelf and one center locatedsteel structural septum
60� 20� BC2USK2060(S/L/V) 578. 634. 664.72� 20� BC2USK2072(S/L/V) 584. 642. 671.
15�h upper shelf kit, one sided, split widthFor use as open bookcase or with one or two halfwidth sliding door or hinged door kits. Includesone steel shelf and one 15�h center located steelstructural septum
60� 15� BC2USK15601(S/L/V) 503. 554. 578.72� 15� BC2USK15721(S/L/V) 505. 555. 579.
Order Code
Example:
Specification Information Application Notes
Upper shelf kit must be mated withupper back(s) of the same heightand width.
Upper shelf kit is required on all60�w or 72�w openings.
Note: 15�h and 20�h sliding doorand hinged door kits in 30� and36� widths being utilized in eitherone sided or two sided split widthapplications will still come with amatching width shelf that will notbe needed but may still be utilizedin another opening matching thatwidth.
One Sided, Full Width - Includes arecessed structural septum and isdesigned to remain open or accept afull width (60�w x 72�w) sliding doorkit. Will not accept hinged doorkits. Full width matching heightback kit must be ordered separately.
One Sided, Split Width - Includes aone sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 36�wfor 72� kit) sliding door or hingedoor kit on one or both sides of theseptum. Full width matching heightback kit must be ordered separately.
Two Sided, Split Width - Includes atwo sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 62�wfor 72� kit) sliding door or hingedoor kit on one of both sides of theseptum on opposite sides of the caseopening to create a sharedoverhead. Two half width (30�w for60� kit or 36�w for 72� kit) matchingheight back kits must be orderedseparately.
Template
86
Upper Shelf Kit, 15�h and 20�h, steelfor 60�w and 72�w sections
description w d h pattern no. P1 P2 P3
20�h upper shelf kit, one sided, split widthFor use as open bookcase or with one or two halfwidth sliding door or hinged door kits. Includesone full width steel shelf, two half width steelshelves and one 20�h center located steelstructural septum
60� 20� BC2USK20601(S/L/V) $726. $799. $835.72� 20� BC2USK20721(S/L/V) 744. 821. 857.
15�h upper shelf kit, two sided, split widthFor use as a shared open bookcase or with one ortwo half width sliding door or hinged door kits.Includes one steel shelf and one 15�h centerlocated steel structural septum
60� 15� BC2USK15602(S/L/V) 506. 557. 582.72� 15� BC2USK15722(S/L/V) 515. 566. 589.
Order Code
Example:
Specification Information Application Notes
Upper shelf kit must be mated withupper back(s) of the same heightand width.
Upper shelf kit is required on all60�w or 72�w openings.
Note: 15�h and 20�h sliding doorand hinged door kits in 30� and36� widths being utilized in eitherone sided or two sided split widthapplications will still come with amatching width shelf that will notbe needed but may still be utilizedin another opening matching thatwidth.
One Sided, Full Width - Includes arecessed structural septum and isdesigned to remain open or accept afull width (60�w x 72�w) sliding doorkit. Will not accept hinged doorkits. Full width matching heightback kit must be ordered separately.
One Sided, Split Width - Includes aone sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 36�wfor 72� kit) sliding door or hingedoor kit on one or both sides of theseptum. Full width matching heightback kit must be ordered separately.
Two Sided, Split Width - Includes atwo sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 62�wfor 72� kit) sliding door or hingedoor kit on one of both sides of theseptum on opposite sides of the caseopening to create a sharedoverhead. Two half width (30�w for60� kit or 36�w for 72� kit) matchingheight back kits must be orderedseparately.
Template
87
Upper Shelf Kit, 15�h and 20�h, steelfor 60�w and 72�w sections
description w d h pattern no. P1 P2 P3
20�h upper shelf kit, two sided, split widthFor use as a shared open bookcase or with one ortwo half width sliding door or hinged door kits.Includes one full width steel shelf, two half widthsteel shelves and one 20�h center located steelstructural septum
60� 15� BC2USK20602(S/L/V) $730. $801. $838.72� 15� BC2USK20722(S/L/V) 748. 823. 861.
Order Code
Example:
Specification Information Application Notes
Upper shelf kit must be mated withupper back(s) of the same heightand width.
Upper shelf kit is required on all60�w or 72�w openings.
Note: 15�h and 20�h sliding doorand hinged door kits in 30� and36� widths being utilized in eitherone sided or two sided split widthapplications will still come with amatching width shelf that will notbe needed but may still be utilizedin another opening matching thatwidth.
One Sided, Full Width - Includes arecessed structural septum and isdesigned to remain open or accept afull width (60�w x 72�w) sliding doorkit. Will not accept hinged doorkits. Full width matching heightback kit must be ordered separately.
One Sided, Split Width - Includes aone sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 36�wfor 72� kit) sliding door or hingedoor kit on one or both sides of theseptum. Full width matching heightback kit must be ordered separately.
Two Sided, Split Width - Includes atwo sided structural septum and isdesigned to remain open or accept ahalf width (30�w for 60� kit or 62�wfor 72� kit) sliding door or hingedoor kit on one of both sides of theseptum on opposite sides of the caseopening to create a sharedoverhead. Two half width (30�w for60� kit or 36�w for 72� kit) matchingheight back kits must be orderedseparately.
Template
88
Shelf Dividerspackage of 14�h, 5�h, 6�h, 7�h, 12�h, 13�h and 14�h
description w d h pattern no. P1 P2 P3
Shelf divider, 4�h single 1� 13� 43/16� BC1SDIV4 $135. $151. $158.
Shelf divider, 5�h single 1� 13� 51/4� BC1SDIV5 137. 152. 160.
Shelf divider, 6�h single 1� 13� 65/16� BC1SDIV6 138. 153. 153.
Shelf divider, 7�h single 1� 13� 73/8� BC1SDIV7 138. 153. 153.
Shelf divider, 12h single 1� 13� 1115/16� BC1SDIV12 144. 161. 169.
Shelf divider, 13h single 1� 13� 125/8� BC1SDIV13 145. 162. 170.
Shelf divider, 14h single 1� 13� 1311/16� BC1SDIV14 149. 164. 171.
Order Code
Example:
Specification Information
Shelf dividers work with painted orveneer shelves.
Dividers are non-handed andinclude shelf slots on one side foradditional shelf division.
Application Notes
Shelf divider is adjustable in thefield for use with either steel orveneer shelf or top position above it.
Slots on shelf divider may only beused to support a shelf on thedivider and an adjacent end or midpanel.
A shelf may NOT be supportedbetween two shelf dividers.
Shelf dividers are not designed to beplaced directly above a worksurfaceshelf at worksurface height.
Template
89
Shelf Dividerspackage of 44�h, 5�h, 6�h and 7�h
description w d h pattern no. P1 P2 P3
Shelf divider, 4�h package of 4 1� 13� 43/16� BC1SDIV44 $423. $465. $486.
Shelf divider, 5�h package of 4 1� 13� 51/4� BC1SDIV54 429. 473. 491.
Shelf divider, 6�h package of 4 1� 13� 65/16� BC1SDIV64 433. 479. 497.
Shelf divider, 7�h package of 4 1� 13� 73/8� BC1SDIV74 437. 484. 508.
Order Code
Example:
Specification Information
Shelf dividers work with painted orveneer shelves.
Dividers are non-handed andinclude shelf slots on one side foradditional shelf division.
Application Notes
Shelf divider is adjustable in thefield for use with either steel orveneer shelf or top position above it.
Slots on shelf divider may only beused to support a shelf on thedivider and an adjacent end or midpanel.
A shelf may NOT be supportedbetween two shelf dividers.
Shelf dividers are not designed to beplaced directly above a worksurfaceshelf at worksurface height.
Template
90
Shelf Dividerspackage of 412�h, 13�h and 14�h
description w d h pattern no. P1 P2 P3
Shelf divider, 12�h package of 4 1� 13� 1115/16� BC1SDIV124 $466. $513. $537.
Shelf divider, 13�h package of 4 1� 13� 125/8� BC1SDIV134 467. 515. 537.
Shelf divider, 14�h package of 4 1� 13� 1311/16� BC1SDIV144 475. 520. 543.
Order Code
Example:
Specification Information
Shelf dividers work with painted orveneer shelves.
Dividers are non-handed andinclude shelf slots on one side foradditional shelf division.
Application Notes
Shelf divider is adjustable in thefield for use with either steel orveneer shelf or top position above it.
Slots on shelf divider may only beused to support a shelf on thedivider and an adjacent end or midpanel.
A shelf may NOT be supportedbetween two shelf dividers.
Shelf dividers are not designed to beplaced directly above a worksurfaceshelf at worksurface height.
Template
91
Shelf Dividerspackage of 84�h, 5�h, 6�h and 7�h
description w d h pattern no. P1 P2 P3
Shelf divider, 4�h package of 8 1� 13� 43/16� BC1SDIV48 $791. $869. $909.
Shelf divider, 5�h package of 8 1� 13� 51/4� BC1SDIV58 802. 880. 920.
Shelf divider, 6�h package of 8 1� 13� 65/16� BC1SDIV68 813. 895. 935.
Shelf divider, 7�h package of 8 1� 13� 73/8� BC1SDIV78 823. 905. 947.
Order Code
Example:
Specification Information
Shelf dividers work with painted orveneer shelves.
Dividers are non-handed andinclude shelf slots on one side foradditional shelf division.
Application Notes
Shelf divider is adjustable in thefield for use with either steel orveneer shelf or top position above it.
Slots on shelf divider may only beused to support a shelf on thedivider and an adjacent end or midpanel.
A shelf may NOT be supportedbetween two shelf dividers.
Shelf dividers are not designed to beplaced directly above a worksurfaceshelf at worksurface height.
Template
92
Shelf Dividerspackage of 812�h, 13�h and 14�h
description w d h pattern no. P1 P2 P3
Shelf divider, 12�h package of 8 1� 13� 1115/16� BC1SDIV128 $877. $964. $1,006.
Shelf divider, 13�h package of 8 1� 13� 125/8� BC1SDIV138 879. 965. 1,010.
Shelf divider, 14�h package of 8 1� 13� 1311/16� BC1SDIV148 893. 978. 1,022.
Order Code
Example:
Specification Information
Shelf dividers work with painted orveneer shelves.
Dividers are non-handed andinclude shelf slots on one side foradditional shelf division.
Application Notes
Shelf divider is adjustable in thefield for use with either steel orveneer shelf or top position above it.
Slots on shelf divider may only beused to support a shelf on thedivider and an adjacent end or midpanel.
A shelf may NOT be supportedbetween two shelf dividers.
Shelf dividers are not designed to beplaced directly above a worksurfaceshelf at worksurface height.
Template
93
Base Infeed, Base Power Transfer Block,Base Power Duplex Block, Base Duplex, Base Power Jumperand Knockout Cover 8-wire Power
description w d h pattern no. list
Base infeed, 72� 72� BE2BI872 $317.
Base infeed, 72� for New York 72� BE2BI872NY 317.
Base infeed, 72� for San Francisco 72� BE2BI872SF 317.
Base power transfer block BE2BTB8 54.
Base power duplex block BE2BDB8 125.
Base duplex (plg. of 6) BE2BDUP6(1/2/3/3D/4D) 223.
Base power jumper 102� BE2BPJ8102 273.108� BE2BPJ8108 277.114� BE2BPJ8114 282.120� BE2BPJ8120 285.24� BE2BPJ824 172.30� BE2BPJ830 183.36� BE2BPJ836 194.42� BE2BPJ842 204.48� BE2BPJ848 210.54� BE2BPJ854 214.60� BE2BPJ860 218.66� BE2BPJ866 233.72� BE2BPJ872 238.78� BE2BPJ878 248.84� BE2BPJ884 255.90� BE2BPJ890 263.96� BE2BPJ896 267.
Desk height knockout cover,package of 10
BE2KC10 88.
Order Code
Example:
Application Notes
Base infeed is designed to feed intoan end panel with base infeedknockouts specified. There is roomfor two base infeeds at each endpanel.
Base power transfer block providesfour transition points to receive aninfeed, a base power jumper ordesk-height power module.Infeed must be used with basepower transfer block in horizontalposition when specified beneath abase cover.
Base power duplex block providesfour transition points to receive aninfeed, a base power jumper ordesk-height power module as wellas a single base duplex on one orboth sides of the block.
Infeed connection with basepower duplex block is notcompatible with base cover.
NOTE: When utilizing baseduplexes, an electrical base withgrommets must be ordered toaccommodate wire access.
Base power jumper lengths arecomputed by adding the width ofbases you are connecting to anddivide by two and then add the fullwidth of any bases that may be inbetween the ones being connected.If distance between connectionsexceeds 72�, specify a base powerblock and an additional jumper toobtain the length desired.
Knockout cover is available in allcore paint finishes.
Template
94
Desk-Height Power Modules ( one circuit)Circuits 1, 2, 3 and 4D (3+1)Circuits 1, 2, 3D and 4D (2+2)
description w d h pattern no. list
Desk-height power module, data/data 13� 3� 11/2� BE2EPM8DD(1/2/3/3D/4D) $427.
Desk-height power module, data/USB 13� 3� 11/2� BE2EPM8DU(1/2/3/3D/4D) 681.
Desk-height power module, USB/data 13� 3� 11/2� BE2EPM8UD(1/2/3/3D/4D) 681.
Order Code
Example:
Application Notes
Desk-height power modules areavailable in single circutdesignations per module.
Modules include a power jumperpigtail long enough to reach thecenter of any base from either anabove desk height or below deskheight position.
Desk-height power modules includemounting bracket to positionmodule just above or just belowdesk height.
All desk height power modulesinclude 4 simplexes in the center ofeach module. The remaining twosimplex locations on either side areconfigured from left to right per thepattern number designation.
D=2 data jack positionsU=USB hub
Data jack comes with a variety ofbezels to accept the most commondata modules as wall as RGB andmicrophone jacks.
USB hub module provides 4powered USB jacks offering ashared total of 500mA for data orpowered USB access.
Template
95
Desk-Height Power Modules ( two circuits)Circuits 1, 2, 3 and 4D (3+1)Circuits 1, 2, 3D and 4D (2+2)
description w d h pattern no. list
Desk-height power module, data/data 13� 3� 11/2� BE2EPM8DD(14D/24D/34D/13D/23D) $486.
Desk-height power module, data/USB 13� 3� 11/2� BE2EPM8DU(14D/24D/34D/13D/23D) 740.
Desk-height power module, USB/data 13� 3� 11/2� BE2EPM8UD(14D/24D/34D/13D/23D) 740.
Order Code
Example:
Application Notes
Desk-height power modules areavailable in single circutdesignations per module.
Modules include a power jumperpigtail long enough to reach thecenter of any base from either anabove desk height or below deskheight position.
Desk-height power modules includemounting bracket to positionmodule just above or just belowdesk height.
All desk height power modulesinclude 4 simplexes in the center ofeach module. The remaining twosimplex locations on either side areconfigured from left to right per thepattern number designation.
D=2 data jack positionsU=USB hub
Data jack comes with a variety ofbezels to accept the most commondata modules as wall as RGB andmicrophone jacks.
USB hub module provides 4powered USB jacks offering ashared total of 500mA for data orpowered USB access.
Dual circuit boxes split the 4simplex outlets in the circuit optionsas listed in the pattern number.(example: suffix ‘‘14D’’ will providecircuit 1 on three simplexes andcircuit 4D on the remaining simplex)
Template
96
Worksurface Mount Power Moduleswith three-prong plug
description w d h pattern no. list
Worksurface mount data/electricalIncludes two data openings and two electricalsimplexes
8� 21/2� 3� BE2WMDE72C(W/B) $379.
Worksurface mount USB/electricalIncludes powered USB hub and two electricalsimplexes
8� 21/2� 3� BE2WMUE72C(W/B) 768.
Order Code
Example: BE2WMDE72CWBE Template electrical2 Generation 2WM Worksurface mountDE Data/electrical72C 72� cordW White
Specification Information
Worksurface mount electricalmodules are available in eitherwhite (W) or black (B). Colorapplies to the face and ends of theunit. The body finish is clearaluminum.
Data and USB hub and iPod dockare located on left side of themodule and electrical simplexes areon the right.
Application Notes
Worksurface mount electricalmodules clamp to the back edge ofworksurface and include a 72� longcord with standard three-prong plug.
Data/electrical module - Includestwo data openings and two electricalsimplexes. Data plugs are fieldconnected and installed. Unitincludes bezels to accommodatemajority of data plug optionsavailable as well as RGB and microphone plugs. Access for data cordsis located on the underside ofmodule.
USB/electrical module - USB hubmodule provides 4 powered USBjacks offering a shared total of500mA for data or powered USBaccess.
Template
97
Worksurface Mount Power Moduleswith modular jumper end
description w d h pattern no. list
Worksurface mount data/electricalIncludes two data openings and two electricalsimplexes
8� 21/2� 3� BE2WMDE(1/2/3/3D/4D)108J(W/B) $379.
Worksurface mount USB/electricalIncludes powered USB hub and two electricalsimplexes
8� 21/2� 3� BE2WMUE(1/2/3/3D/4D)108J(W/B) 768.
Example: BE2WMDE108JWBE Template electrical2 Generation 2WM Worksurface mountDE Data/electrical108J 108� jumpterW White
Specification Information
Worksurface mount electricalmodules are available in eitherwhite (W) or black (B). Colorapplies to the face and ends of theunit. The body finish is clearaluminum.
Data and USB hub and iPod� dockare located on left side of themodule and electrical simplexes areon the right.
Application Notes
Worksurface mount electricalmodules clamp to the back edge ofworksurface and include a 108� longmetal conduit with modular jumperend to connect to Template power.
Modules are designed for use with28�h full backs with grommet andcorresponding end or mid panelspecified with electrical access.
Jumper feeds through grommet andinto below worksurface electricalknockout in end or mid panel so itmay be routed into Template base toconnect to Template electricalcomponents.
The 108� jumper length providesenough room to connect in a 48�wbase, travel up to worksurfaceheight and position the module on aperpendicular worksurface up to 48�from the Template wall.
To compute the maximum distancethe module may be placed on theworksurface from the perpendicularTemplate spine, take 108 andsubtract the combination of one-halfsimplexes are on the right. the basewidth and 36.
Ex. When connecting to a 42�w base108 - (21+36) = up to 51� from theTemplate spine.
NOTE: Calculation providesmaximum distance fromperpendicular Template spine.Module may be placed closer to thespine with conduit slack taken up inthe end/mid panel or base.
Data/electrical module - Includestwo data openings and two electricalsimplexes. Data plugs are fieldconnected and installed. Unitincludes bezels to accommodatemajority of data plug optionsavailable as well as RGB andmicrophone plugs. Access for datacords is located on the underside ofmodule.USB/electrical module - USB hubmodule provides 4 powered USBjacks offering a shared total of500mA for data or powered USBaccess.
Template
98
Worksurface Mount Receptacle BlockSingle duplex block
description w pattern no. list
Worksurface mount receptacle block BE2WMBD $138.
Base duplex (plg. of 6) BE2BDUP6(1/2/3/3D/4D) 223.
Base power jumper 102� BE2BPJ8102 273.108� BE2BPJ8108 277.114� BE2BPJ8114 282.120� BE2BPJ8120 285.24� BE2BPJ824 172.30� BE2BPJ830 183.36� BE2BPJ836 194.42� BE2BPJ842 204.48� BE2BPJ848 210.54� BE2BPJ854 214.60� BE2BPJ860 218.66� BE2BPJ866 233.72� BE2BPJ872 238.78� BE2BPJ878 248.84� BE2BPJ884 255.90� BE2BPJ890 263.96� BE2BPJ896 267.
Order Code
Example: BE2WMBDBE Template electrical2 Generation 2WM Worksurface mountBD Block for duplex
Specification Information
Available in black only.
Application Notes
Duplex block includes underworksurface mounting bracket aswell as three P-clips for positioningconduit to underside of worksurfaceand against inside of end/mid panel.
Duplex block is designed for usewith 28�h full backs with grommetand corresponding end or mid panelspecified with electrical access.
A jumper feeds through grommetand into below worksurfaceelectrical knock-out in end or midpanel so it may be routed intoTemplate base to connect toTemplate electrical components.
To complete the jumper lengthrequired to connect the duplexblock to an adjacent base, add thedistance from the block to theTemplate wall, 36� to travel to thebase and one-half the base width toreach a base power transfer block.Round up the next jumper size ifdimension required does not equalan existing jumper length.
Ex. To place a duplex block in themiddle of a 60� worksurfaceconnected to a Template spine with42�w base.
30� + 36� + 21� = 87�(90� jumperwould be utilized)
Template
99
Transition JumpersDividends to Template
description type pattern no. list
Dividends to Template transition jumper, 3+1 for 15�w Template base BE2DTJ822 $316.for 18�w Template base BE2DTJ825 326.for 24�w Template base BE2DTJ828 336.for 30�w Template base BE2DTJ831 342.for 36�w Template base BE2DTJ834 350.for 42�w Template base BE2DTJ837 358.for 48�w Template base BE2DTJ840 366.
Dividends to Template transition jumper, 2+2 for 15�w Template base BE2DTJ822-2 316.for 18�w Template base BE2DTJ825-2 326.for 24�w Template base BE2DTJ828-2 336.for 30�w Template base BE2DTJ831-2 342.for 34�w Template base BE2DTJ834-2 350.for 42�w Template base BE2DTJ837-2 358.for 48�w Template base BE2DTJ840-2 366.
Order Code
Example:
Application Notes
Jumper length assumes connectionfrom Dividends panel electrical,through 15�w Dividends panel, intoTemplate base
Template
100
Rectangular Worksurfaces18�d
description w d h pattern no. laminate V1 V2 V3
Rectangular worksurface, 18�Template depth
36� 16� 11/4� BW1R3618T(L/V) $235. $509. $584. $789.42� 16� 11/4� BW1R4218T(L/V) 274. 532. 612. 826.48� 16� 11/4� BW1R4818T(L/V) 306. 553. 633. 857.54� 16� 11/4� BW1R5418T(L/V) 324. 573. 658. 889.60� 16� 11/4� BW1R6018T(L/V) 354. 618. 714. 965.66� 16� 11/4� BW1R6618T(L/V) 382. 641. 737. 995.72� 16� 11/4� BW1R7218T(L/V) 401. 672. 776. 1,047.78� 16� 11/4� BW1R7818T(L/V) 433. 683. 782. 1,055.84� 16� 11/4� BW1R8418T(L/V) 455. 730. 837. 1,130.
Rectangular worksurface, 18�Pedestal depth
36� 171/2� 11/4� BW1R3618P(L/V) 235. 509. 584. 789.42� 171/2� 11/4� BW1R4218P(L/V) 274. 532. 612. 826.48� 171/2� 11/4� BW1R4818P(L/V) 306. 553. 633. 857.54� 171/2� 11/4� BW1R5418P(L/V) 324. 573. 658. 889.60� 171/2� 11/4� BW1R6018P(L/V) 354. 618. 714. 965.66� 171/2� 11/4� BW1R6618P(L/V) 382. 641. 737. 995.72� 171/2� 11/4� BW1R7218P(L/V) 401. 672. 776. 1,047.78� 171/2� 11/4� BW1R7818P(L/V) 433. 683. 782. 1,055.84� 171/2� 11/4� BW1R8418P(L/V) 455. 730. 837. 1,130.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurfacesmatches standard systemworksurface depths (acutalminus1/2�) and may mount toworksurface shelves whose width isa least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Template
101
Rectangular Worksurfaces24�d
description w d h pattern no. laminate V1 V2 V3
Rectangular worksurface, 24�dTemplate depth
36� 22� 11/4� BW1R3624T(L/V) $272. $544. $627. $846.42� 22� 11/4� BW1R4224T(L/V) 312. 560. 644. 869.48� 22� 11/4� BW1R4824T(L/V) 348. 604. 694. 935.54� 22� 11/4� BW1R5424T(L/V) 380. 641. 737. 995.60� 22� 11/4� BW1R6024T(L/V) 410. 690. 793. 1,069.66� 22� 11/4� BW1R6624T(L/V) 440. 709. 817. 1,099.72� 22� 11/4� BW1R7224T(L/V) 459. 740. 851. 1,149.78� 22� 11/4� BW1R7824T(L/V) 492. 776. 891. 1,201.84� 22� 11/4� BW1R8424T(L/V) 522. 807. 927. 1,254.
Rectangular worksurface, 24�dPedestal depth
36� 231/2� 11/4� BW1R3624P(L/V) 272. 544. 627. 846.42� 231/2� 11/4� BW1R4224P(L/V) 312. 560. 644. 869.48� 231/2� 11/4� BW1R4824P(L/V) 348. 604. 694. 935.54� 231/2� 11/4� BW1R5424P(L/V) 380. 641. 737. 995.60� 231/2� 11/4� BW1R6024P(L/V) 410. 690. 793. 1,069.66� 231/2� 11/4� BW1R6624P(L/V) 440. 709. 817. 1,099.72� 231/2� 11/4� BW1R7224P(L/V) 459. 740. 851. 1,149.78� 231/2� 11/4� BW1R7824P(L/V) 492. 776. 891. 1,201.84� 231/2� 11/4� BW1R8424P(L/V) 522. 807. 927. 1,254.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurfacesmatches standard systemworksurface depths (acutalminus1/2�) and may mount toworksurface shelves whose width isa least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Template
102
Rectangular Worksurfaces30�d and 36�d
description w d h pattern no. laminate V1 V2 V3
Rectangular worksurface, 30�dTemplate depth
36� 28� 11/4� BW1R3630T(L/V) $338. $610. $704. $947.42� 28� 11/4� BW1R4230T(L/V) 369. 632. 730. 981.48� 28� 11/4� BW1R4830T(L/V) 410. 674. 778. 1,050.54� 28� 11/4� BW1R5430T(L/V) 464. 734. 843. 1,135.60� 28� 11/4� BW1R6030T(L/V) 510. 758. 873. 1,176.66� 28� 11/4� BW1R6630T(L/V) 566. 775. 890. 1,200.72� 28� 11/4� BW1R7230T(L/V) 588. 794. 914. 1,234.78� 28� 11/4� BW1R7830T(L/V) 629. 832. 957. 1,290.84� 28� 11/4� BW1R8430T(L/V) 666. 864. 995. 1,343.
Rectangular worksurface, 30�dPedestal depth
36� 291/2� 11/4� BW1R3630P(L/V) 338. 610. 704. 947.42� 291/2� 11/4� BW1R4230P(L/V) 369. 632. 730. 981.48� 291/2� 11/4� BW1R4830P(L/V) 410. 674. 778. 1,050.54� 291/2� 11/4� BW1R5430P(L/V) 464. 734. 843. 1,135.60� 291/2� 11/4� BW1R6030P(L/V) 510. 758. 873. 1,176.66� 291/2� 11/4� BW1R6630P(L/V) 566. 775. 890. 1,200.72� 291/2� 11/4� BW1R7230P(L/V) 588. 794. 914. 1,234.78� 291/2� 11/4� BW1R7830P(L/V) 629. 832. 957. 1,290.84� 291/2� 11/4� BW1R8430P(L/V) 666. 864. 995. 1,343.
Rectangular worksurface, 36�dTemplate depth
60� 34� 11/4� BW1R6036T(L/V) 654. 875. 1,006. 1,359.66� 34� 11/4� BW1R6636T(L/V) 721. 903. 1,042. 1,404.72� 34� 11/4� BW1R7236T(L/V) 795. 935. 1,076. 1,454.
Rectangular worksurface, 36�dPedestal depth
60� 351/2� 11/4� BW1R6036P(L/V) 654. 875. 1,006. 1,359.66� 351/2� 11/4� BW1R6636P(L/V) 721. 903. 1,042. 1,404.72� 351/2� 11/4� BW1R7236P(L/V) 795. 935. 1,076. 1,454.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurfacesmatches standard systemworksurface depths (acutalminus1/2�) and may mount toworksurface shelves whose width isa least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Template
103
Trapezoid Worksurfaces18�/24�d and 24�/18�d
description w d h pattern no. laminate V1 V2 V3
Trapezoid worksurface, 18�/24�dTemplate depth
48� 16�/22� 11/4� BW1T481824T(L/V) $553. $608. $698. $941.54� 16�/22� 11/4� BW1T541824T(L/V) 567. 625. 719. 971.60� 16�/22� 11/4� BW1T601824T(L/V) 584. 643. 739. 999.72� 16�/22� 11/4� BW1T721824T(L/V) 695. 763. 877. 1,184.
Trapezoid worksurface, 24�/18�dTemplate depth
48� 22�/16� 11/4� BW1T482418T(L/V) 553. 608. 698. 941.54� 22�/16� 11/4� BW1T542418T(L/V) 567. 625. 719. 971.60� 22�/16� 11/4� BW1T602418T(L/V) 584. 643. 739. 999.72� 22�/16� 11/4� BW1T722418T(L/V) 695. 763. 877. 1,184.
Trapezoid worksurface, 18�/24�dPedestal depth
48� 171/2�/231/2� 11/4� BW1T481824P(L/V) 553. 608. 698. 941.54� 171/2�/231/2� 11/4� BW1T541824P(L/V) 567. 625. 719. 971.60� 171/2�/231/2� 11/4� BW1T601824P(L/V) 584. 643. 739. 999.72� 171/2�/231/2� 11/4� BW1T721824P(L/V) 695. 763. 877. 1,184.
Trapezoid worksurface, 24�/18�dPedestal depth
18� 231/2�/171/2� 11/4� BW1T482418P(L/V) 553. 608. 698. 941.54� 231/2�/171/2� 11/4� BW1T542418P(L/V) 567. 625. 719. 971.60� 231/2�/171/2� 11/4� BW1T602418P(L/V) 584. 643. 739. 999.72� 231/2�/171/2� 11/4� BW1T722418P(L/V) 695. 763. 877. 1,184.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurfacesmatches standard systemworksurface depths (acutalminus1/2�) and may mount toworksurface shelves whose width isa least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Trapezoid worksurface depths areconfigured left to right from the useredge.
The user edge is the angled edge.The back edge is perpendicular toboth ends.
Template
104
Trapezoid Worksurfaces24/30�d and 30�/24�d
description w d h pattern no. laminate V1 V2 V3
Trapezoid worksurface, 24�/30�dTemplate depth
48� 22�/28� 11/4� BW1T482430T(L/V) $668. $737. $846. $1,142.54� 22�/28� 11/4� BW1T542430T(L/V) 691. 760. 874. 1,177.60� 22�/28� 11/4� BW1T602430T(L/V) 709. 780. 896. 1,208.72� 22�/28� 11/4� BW1T722430T(L/V) 740. 817. 936. 1,266.
Trapezoid worksurface, 30�/24�dTemplate depth
48� 28�/22� 11/4� BW1T483024T(L/V) 668. 737. 846. 1,142.54� 28�/22� 11/4� BW1T543024T(L/V) 691. 760. 874. 1,177.60� 28�/22� 11/4� BW1T603024T(L/V) 709. 780. 896. 1,208.72� 28�/22� 11/4� BW1T723024T(L/V) 740. 817. 936. 1,266.
Trapezoid worksurface, 24�/30�dPedestal depth
48� 231/2�/291/2� 11/4� BW1T482430P(L/V) 668. 737. 846. 1,142.54� 231/2�/291/2� 11/4� BW1T542430P(L/V) 691. 760. 874. 1,177.60� 231/2�/291/2� 11/4� BW1T602430P(L/V) 709. 780. 896. 1,208.72� 231/2�/291/2� 11/4� BW1T722430P(L/V) 740. 817. 936. 1,266.
Trapezoid worksurface, 30�/24�dPedestal depth
48� 291/2�/231/2� 11/4� BW1T483024P(L/V) 668. 737. 846. 1,142.54� 291/2�/231/2� 11/4� BW1T543024P(L/V) 691. 760. 874. 1,177.60� 291/2�/231/2� 11/4� BW1T603024P(L/V) 709. 780. 896. 1,208.72� 291/2�/231/2� 11/4� BW1T723024P(L/V) 740. 817. 936. 1,266.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurfacesmatches standard systemworksurface depths (acutalminus1/2�) and may mount toworksurface shelves whose width isa least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Trapezoid worksurface depths areconfigured left to right from the useredge.
The user edge is the angled edge.The back edge is perpendicular toboth ends.
Template
105
120° Worksurfaces24�d
description w d h pattern no. laminate V1 V2 V3
120° worksurface, 24�d, left handTemplate depth
54� 22� 11/4� BW1SL5424T(L/V) $508. $1,624. $1,867. $2,524.60� 22� 11/4� BW1SL6024T(L/V) 527. 1,685. 1,938. 2,619.
120° worksurface, 24�d, right handTemplate depth
54� 22� 11/4� BW1SR5424T(L/V) 508. 1,624. 1,867. 2,524.60� 22� 11/4� BW1SR6024T(L/V) 527. 1,685. 1,938. 2,619.
Order Code
Example:
Application Notes
Template depth worksurfaces aredesigned to mount perpendicular toworksurface shelves whose widthmatches that of the worksurface’sdepth.
Pedestal depth worksurface matchesstandard system worksurface depths(actual minus1/2�) and may mount toworksurface shelves whose width isat least 6� wider than the depth ofthe perpendicular worksurface.
Worksurface mounts to aperpendicular worksurface shelfwith a flat bracket (orderedseparately).
Worksurface will only mount to aperpendicular worksurface shelf.
Width is that of straight back edge.
120° worksurface requires twocolumns for proper support onnon-flat bracketed end.
Template
106
Support Brackets and Support Legs
description w d h pattern no. Black P1 P2 P3
Credenza spacer 43/4� BW1CSB $179. $200. $206.
Flat bracket, single, black only 18� BW1FB18 44.24� BW1FB24 46.30� BW1FB30 48.
Flat bracket, package of 10, black only 18� BW1FB1810 347.24� BW1FB2410 363.30� BW1FB3010 386.
Support column, round, black only 3� BW1SCR 292.
Support leg, pedestal depth 171/2� 11/8� 273/16� BW1SL18P 436. 480. 501.231/2� 11/8� 273/16� BW1SL24P 448. 492. 517.291/2� 11/8� 273/16� BW1SL30P 465. 510. 532.351/2� 11/8� 273/16� BW1SL36P 477. 525. 546.
Support leg, Template depth 16� 11/8� 273/16� BW1SL18T 436. 480. 501.22� 11/8� 273/16� BW1SL24T 448. 492. 517.28� 11/8� 273/16� BW1SL30T 465. 510. 532.34� 11/8� 273/16� BW1SL36T 477. 525. 546.
Worksurface Reinforcement Strap 311/2� BW1WR54 80. n/a n/a n/a371/2� BW1WR60 81. n/a n/a n/a431/2� BW1WR66 86. n/a n/a n/a48� BW1WR72 88. n/a n/a n/a54� BW1WR78 91. n/a n/a n/a60� BW1WR84 93. n/a n/a n/a
Order Code
Example:
Application Notes
Credenza spacer supports aworksurface mounted to a credenzaheight worksurface shelf or to thetop of a credenza height unit.
Flat bracket supports worksurface toperpendicular worksurface shelfand must match the depth of theworksurface.
Support leg supports eitherrectangular or trapezoid shapeworksurface.
Worksurface reinforcement strapsprevent bowing when no othersupport is utilized. Matchunsupported width to width inpattern number to receiveappropriate strap.
Template
107
Core Structure Accessories
description w d h pattern no. list P1 P2 P3
Installation kit BC1INSTALL $81.
End panel to Div. Hor. panel tie bar BC1TDBAR 29.
End panel to Div. Hor. panel brackets BC1EPDPB(L/R) 35.
Dividends Horizon panel to Templateworksurface bracket
BC1PWS(L/R) 35.
Coat hook, package of 10, chrome only BC1CH10 78.
Pencil tray holder, singleincludeds painted holder and black pencil tray
12� 4� 3/4� BC1PTH1 88. 96. 101.
Pencil tray holder, package of 4includeds painted holder and black pencil tray
12� 4� 3/4� BC1PTH4 172. 189. 201.
Pencil tray holder, package of 8includeds painted holder and black pencil tray
12� 4� 3/4� BC1PTH8 286. 314. 327.
Fabric Insert Clip BC1FINSCLIP 58.
Double stick tape, 10 pieces BC1FINTAPE 23.
Order Code
Example:
Application Information
Installation kit contains thefollowing:• Printed instruction manual• Drill templates• Glide wrench
The end panel to Div. Hor. Tie barallows on- or off-moduleattachments of a Div. Hor. panel ofany width to a Template end panelthat is the same height or taller thanthe Div. Hor. panel.
End panel to Dividends Horizonpanel brackets include an upperand lower bracket that attaches aTemplate end panel to the right orleft side of any standard DividendsHorizon panel 42�h or taller that isthe same height or taller than theend panel.
Dividends Horizon panel toTemplate worksurface bracketstabilizes a panel to a Templateworksurface or top to credenza orworksurface height.
Coat hook mounts to inside of end ormid panel.
Pencil tray holder attaches to theslotted side(s) of either an end ormid panel.
Pencil tray holder is painted steeland comes with black pencil tray.
Markerboard tray may be positionedat worksurface height only betweena 28�h full back below it and a midor upper back above it. Tray andbacks must be the same width.
Template
108
Drawer Kit Accessories
description type w d h pattern no. list P1 P2 P3
Box drawer partition, package of 6, black only 12� 6� BD1BPAR6 $55.
File drawer partition, package of 6, black only 12� 12� BD1FPAR6 112.
Counterbalance Kit 18� 15� BD1CBK18 187.24� 15� BD1CBK24 223.30� 15� BD1CBK30 267.36� 15� BD1CBK36 308.42� 15� BD1CBK42 348.48� 15� BD1CBK48 386.
Pencil tray, single black 12� 4� 3/4� BC1PT1N 47.clear 12� 4� 3/4� BC1PT1C 54.
Pencil tray, package of 4 black 12� 4� 3/4� BC1PT4N 85.clear 12� 4� 3/4� BC1PT4C 101.
Pencil tray, package of 8 black 12� 4� 3/4� BC1PT8N 201.clear 12� 4� 3/4� BC1PT8C 239.
Order Code
Example:
Application Information
Pencil tray works side-to-side ineither a box or file drawer orfront-to-back in box or file drawersutilizing drawer partitions.
Counterbalance kit must bespecified for single width units up to48�w that utilize a drawer kit andare not already ganged to a wall oranother unit.
Template
109
Shelf Kit Accessories
description w d h pattern no. list P1 P2 P3
Shelf space filler, deep (package of 5)for use with painted back and no inside insert
15� 3/4� 11/16� BC1SHFP15 $175. $191. $203.18� 3/4� 11/16� BC1SHFP18 179. 200. 206.23� 3/4� 11/16� BC1SHFP23 180. 201. 209.24� 3/4� 11/16� BC1SHFP24 180. 201. 209.29� 3/4� 11/16� BC1SHFP29 186. 206. 215.30� 3/4� 11/16� BC1SHFP30 186. 206. 215.36� 3/4� 11/16� BC1SHFP36 215. 234. 248.42� 3/4� 11/16� BC1SHFP42 219. 238. 252.48� 3/4� 11/16� BC1SHFP48 222. 246. 257.
Shelf space filler, narrow (package of 5)for use with painted back and inside insertor fabric back with not inside insert
15� 5/16� 11/16� BC1SHFF15 175. 192. 203.18� 5/16� 11/16� BC1SHFF18 180. 202. 209.23� 5/16� 11/16� BC1SHFF23 184. 205. 214.24� 5/16� 11/16� BC1SHFF24 184. 205. 214.29� 5/16� 11/16� BC1SHFF29 189. 210. 219.30� 3/4� 11/16� BC1SHFF30 189. 210. 219.36� 3/4� 11/16� BC1SHFF36 218. 237. 250.42� 3/4� 11/16� BC1SHFF42 223. 246. 257.48� 3/4� 11/16� BC1SHFF48 227. 252. 263.
Slotted Shelf Partition (package of 4) 13� 9� BC1SSPAR4 117. 126. 130.
Slotted Shelf Partition (package of 8) 13� 9� BC1SSPAR8 171. 187. 200.
Worksurface shelf grommet,package of 10, field installed
BC1WSHKGROM10 69.
Order Code
Example:
Application Information
Shelf space filler (deep) fills thespace at the back of a shelf whenutilized with a painted back and noinside inserts.
Shelf space filler (narrow) fills thespace at the back of a shelf whenutilized with a painted back andinside insert or a fabric back withno inside insert.
Shelf space filler works withstandard shelves or one sidedworksurface shelves only.
Slotted shelf partitions are utilizedwith slotted shelves only to dividespace for tab file storage or binderseparation/support.
Worksurface shelf grommet is fieldinstalled to provide additional wiremanagement.
Grommet has a 2� diameter coverwith 11/2� interior access.
Template
110
Task Lights
description type w d h pattern no. list
LED Task Light Use with 48� and wider overhead (72 LED’s) 44� 2� 1/2� BL4L44 $1,260.Use with 66� and wider overhead (96 LED’s) 58� 2� 1/2� BL4L58 1,581.Use with 24� and wider overhead (24 LED’s) 17� 2� 1/2� BL4L17 579.Use with 36� and wider overhead (48 LED’s) 31� 2� 1/2� BL4L31 966.
Order Code
LED Task Light
Example: BL4L17
BL4 Task LightL LED17 Width
Application Information
LED Task Lights:Includes LED’s, power supply with9-12’ cord and mounting hardware.Housings are clear anodizedaluminum with white colorend-caps.
LED Task Lights:Power cord is able to attach to eitherend of fixture.
Notes:All task lights mount into the recessin the underside of overheadcabinets and shelves at least 6�wider than task light width.
All task lights are TCLP compliantand meet requirements of CaliforniaTitle 20 and Title 24.
Template
111
Wall Mounting Suggestions The following information is provided only as a guide, and represents minimum recommendations only. Knoll does not accept responsibility for the attachment of any Knoll product to a Customer’s site wall. Wall specification/construction is the responsibility of the Customer and its structural engineer/architect. Failure to properly attach Knoll products to adequate wall structures can lead to property damage and/or personal injury.
You should consult your own structural engineers and/or architects and must not rely on the information provided herein.
It is the responsibility of the Customer and its structural engineers/architects to verify that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the Knoll products are intended to be mounted are designed appropriately to support the product weight, PLUS 3 lbs. per linear inch for each useable shelf length
NOTE: A cabinet’s top is considered a “useable shelf” and MUST be included in the calculation of the total load for an overhead cabinet.
It is the responsibility of the Customer and its structural engineer/architects to specify the fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc. to the supporting wall and to confirm that the installers have adhered to these specifications. For all local building standards and codes, and additional requirements (including, but not limited to, seismic conditions) the Customer should always consult local code agencies.
Wall Mounting of Knoll Products Template
112
NEW CONSTRUCTION
Cinder Block or Poured Concrete Masonry Wall
Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Wood Stud Wall, the studs being only Ceiling Height
Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Steel Stud Wall, the studs being only Ceiling Height
Stud Specification
Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width
The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Stud Centers
Metal and wood studs must be spaced at 16" c/c maximum
N/A Wood studs must be spaced at 16" c/c maximum
Wood studs must be spaced at 16"" c/c maximum"
Metal studs must be spaced at 16" c/c maximum
Metal studs must be spaced at 16" c/c maximum
Stud Height
Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above
Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above
Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above
Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*
Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.
Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)
Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
*Graham Wall Hung Shelf
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall cleat with...
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with
1-1/4" embedment, screwed directly into the masonry wall
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
EXISTING CONSTRUCTION
Wall Mounting of Knoll Products Template
113
pattern no. page
BB1MBK1218F 44
BB1MBK1218P 39
BB1MBK1224F 44
BB1MBK1224P 39
BB1MBK1230F 44
BB1MBK1230P 39
BB1MBK1236F 44
BB1MBK1236P 39
BB1MBK1242F 44
BB1MBK1242P 39
BB1MBK1248F 44
BB1MBK1248P 39
BB1MBK571518CF 45
BB1MBK571518CP 40
BB1MBK571518WF 45
BB1MBK571518WP 40
BB1MBK571524CF 45
BB1MBK571524CP 40
BB1MBK571524WF 45
BB1MBK571524WP 40
BB1MBK571530CF 45
BB1MBK571530CP 40
BB1MBK571530WF 45
BB1MBK571530WP 40
BB1MBK571536CF 45
BB1MBK571536CP 40
BB1MBK571536WF 45
BB1MBK571536WP 40
BB1MBK571542CF 45
BB1MBK571542CP 40
BB1MBK571542WF 45
BB1MBK571542WP 40
BB1MBK571548CF 45
BB1MBK571548CP 40
BB1MBK571548WF 45
BB1MBK571548WP 40
BB1MBK571560CF 45
BB1MBK571560CP 40
BB1MBK571560WF 45
BB1MBK571560WP 40
BB1MBK571572CF 45
BB1MBK571572CP 40
BB1MBK571572WF 45
BB1MBK571572WP 40
BB1MBK641518CF 46
BB1MBK641518CP 41
BB1MBK641518WF 46
BB1MBK641518WP 41
BB1MBK641524CF 46
BB1MBK641524CP 41
BB1MBK641524WF 46
BB1MBK641524WP 41
BB1MBK641530CF 46
BB1MBK641530CP 41
BB1MBK641530WF 46
BB1MBK641530WP 41
BB1MBK641536CF 46
BB1MBK641536CP 41
BB1MBK641536WF 46
BB1MBK641536WP 41
BB1MBK641542CF 46
pattern no. page
BB1MBK641542CP 41
BB1MBK641542WF 46
BB1MBK641542WP 41
BB1MBK641548CF 46
BB1MBK641548CP 41
BB1MBK641548WF 46
BB1MBK641548WP 41
BB1MBK641560CF 46
BB1MBK641560CP 41
BB1MBK641560WF 46
BB1MBK641560WP 41
BB1MBK641572CF 46
BB1MBK641572CP 41
BB1MBK641572WF 46
BB1MBK641572WP 41
BB1MBK642018CF 46
BB1MBK642018CP 41
BB1MBK642018WF 46
BB1MBK642018WP 41
BB1MBK642024CF 46
BB1MBK642024CP 41
BB1MBK642024WF 46
BB1MBK642024WP 41
BB1MBK642030CF 46
BB1MBK642030CP 41
BB1MBK642030WF 46
BB1MBK642030WP 41
BB1MBK642036CF 46
BB1MBK642036CP 41
BB1MBK642036WF 46
BB1MBK642036WP 41
BB1MBK642042CF 46
BB1MBK642042CP 41
BB1MBK642042WF 46
BB1MBK642042WP 41
BB1MBK642048CF 46
BB1MBK642048CP 41
BB1MBK642048WF 46
BB1MBK642048WP 41
BB1MBK642060CF 46
BB1MBK642060CP 41
BB1MBK642060WF 46
BB1MBK642060WP 41
BB1MBK642072CF 46
BB1MBK642072CP 41
BB1MBK642072WF 46
BB1MBK642072WP 41
BB1MBK711518CF 47
BB1MBK711518CP 42
BB1MBK711518WF 47
BB1MBK711518WP 42
BB1MBK711524CF 47
BB1MBK711524CP 42
BB1MBK711524WF 47
BB1MBK711524WP 42
BB1MBK711530CF 47
BB1MBK711530CP 42
BB1MBK711530WF 47
BB1MBK711530WP 42
BB1MBK711536CF 47
BB1MBK711536CP 42
pattern no. page
BB1MBK711536WF 47
BB1MBK711536WP 42
BB1MBK711542CF 47
BB1MBK711542CP 42
BB1MBK711542WF 47
BB1MBK711542WP 42
BB1MBK711548CF 47
BB1MBK711548CP 42
BB1MBK711548WF 47
BB1MBK711548WP 42
BB1MBK711560CF 47
BB1MBK711560CP 42
BB1MBK711560WF 47
BB1MBK711560WP 42
BB1MBK711572CF 47
BB1MBK711572CP 42
BB1MBK711572WF 47
BB1MBK711572WP 42
BB1MBK712018CF 47
BB1MBK712018CP 42
BB1MBK712018WF 47
BB1MBK712018WP 42
BB1MBK712024CF 47
BB1MBK712024CP 42
BB1MBK712024WF 47
BB1MBK712024WP 42
BB1MBK712030CF 47
BB1MBK712030CP 42
BB1MBK712030WF 47
BB1MBK712030WP 42
BB1MBK712036CF 47
BB1MBK712036CP 42
BB1MBK712036WF 47
BB1MBK712036WP 42
BB1MBK712042CF 47
BB1MBK712042CP 42
BB1MBK712042WF 47
BB1MBK712042WP 42
BB1MBK712048CF 47
BB1MBK712048CP 42
BB1MBK712048WF 47
BB1MBK712048WP 42
BB1MBK712060CF 47
BB1MBK712060CP 42
BB1MBK712060WF 47
BB1MBK712060WP 42
BB1MBK712072CF 47
BB1MBK712072CP 42
BB1MBK712072WF 47
BB1MBK712072WP 42
BB1MBK782018CF 48
BB1MBK782018CP 43
BB1MBK782018WF 48
BB1MBK782018WP 43
BB1MBK782024CF 48
BB1MBK782024CP 43
BB1MBK782024WF 48
BB1MBK782024WP 43
BB1MBK782030CF 48
BB1MBK782030CP 43
BB1MBK782030WF 48
pattern no. page
BB1MBK782030WP 43
BB1MBK782036CF 48
BB1MBK782036CP 43
BB1MBK782036WF 48
BB1MBK782036WP 43
BB1MBK782042CF 48
BB1MBK782042CP 43
BB1MBK782042WF 48
BB1MBK782042WP 43
BB1MBK782048CF 48
BB1MBK782048CP 43
BB1MBK782048WF 48
BB1MBK782048WP 43
BB1MBK782060CF 48
BB1MBK782060CP 43
BB1MBK782060WF 48
BB1MBK782060WP 43
BB1MBK782072CF 48
BB1MBK782072CP 43
BB1MBK782072WF 48
BB1MBK782072WP 43
BB1UBK1418F 34
BB1UBK1418P 31
BB1UBK1424F 34
BB1UBK1424P 31
BB1UBK1430F 34
BB1UBK1430P 31
BB1UBK1436F 34
BB1UBK1436P 31
BB1UBK1442F 34
BB1UBK1442P 31
BB1UBK1448F 34
BB1UBK1448P 31
BB1UBK1518F 34
BB1UBK1518P 31
BB1UBK1524F 34
BB1UBK1524P 31
BB1UBK1530F 34
BB1UBK1530P 31
BB1UBK1536F 34
BB1UBK1536P 31
BB1UBK1542F 34
BB1UBK1542P 31
BB1UBK1548F 34
BB1UBK1548P 31
BB1UBK1560F 34
BB1UBK1560P 31
BB1UBK1572F 34
BB1UBK1572P 31
BB1UBK2018F 35
BB1UBK2018P 31
BB1UBK2024F 35
BB1UBK2024P 31
BB1UBK2030F 35
BB1UBK2030P 31
BB1UBK2036F 35
BB1UBK2036P 31
BB1UBK2042F 35
BB1UBK2042P 31
BB1UBK2048F 35
BB1UBK2048P 31
Alpha-Numeric Index
114
pattern no. page
BB1UBK2060F 35
BB1UBK2060P 31
BB1UBK2072F 35
BB1UBK2072P 31
BB1UBK2218F 35
BB1UBK2218P 31
BB1UBK2224F 35
BB1UBK2224P 31
BB1UBK2230F 35
BB1UBK2230P 31
BB1UBK2236F 35
BB1UBK2236P 31
BB1UBK2242F 35
BB1UBK2242P 31
BB1UBK2248F 35
BB1UBK2248P 31
BB1UBK2818F 36
BB1UBK2818P 32
BB1UBK2824F 36
BB1UBK2824P 32
BB1UBK2830F 36
BB1UBK2830P 32
BB1UBK2836F 36
BB1UBK2836P 32
BB1UBK2842F 36
BB1UBK2842P 32
BB1UBK2848F 36
BB1UBK2848P 32
BB1UBK2918F 36
BB1UBK2918P 32
BB1UBK2924F 36
BB1UBK2924P 32
BB1UBK2930F 36
BB1UBK2930P 32
BB1UBK2936F 36
BB1UBK2936P 32
BB1UBK2942F 36
BB1UBK2942P 32
BB1UBK2948F 36
BB1UBK2948P 32
BB1UBK3518F 37
BB1UBK3518P 32
BB1UBK3524F 37
BB1UBK3524P 32
BB1UBK3530F 37
BB1UBK3530P 32
BB1UBK3536F 37
BB1UBK3536P 32
BB1UBK3542F 37
BB1UBK3542P 32
BB1UBK3548F 37
BB1UBK3548P 32
BB1UBK3618F 37
BB1UBK3618P 32
BB1UBK3624F 37
BB1UBK3624P 32
BB1UBK3630F 37
BB1UBK3630P 32
BB1UBK3636F 37
BB1UBK3636P 32
BB1UBK3642F 37
BB1UBK3642P 32
BB1UBK3648F 37
BB1UBK3648P 32
BB1UBK4218F 38
pattern no. page
BB1UBK4218P 33
BB1UBK4224F 38
BB1UBK4224P 33
BB1UBK4230F 38
BB1UBK4230P 33
BB1UBK4236F 38
BB1UBK4236P 33
BB1UBK4242F 38
BB1UBK4242P 33
BB1UBK4248F 38
BB1UBK4248P 33
BB1UBK4318F 38
BB1UBK4318P 33
BB1UBK4324F 38
BB1UBK4324P 33
BB1UBK4330F 38
BB1UBK4330P 33
BB1UBK4336F 38
BB1UBK4336P 33
BB1UBK4342F 38
BB1UBK4342P 33
BB1UBK4348F 38
BB1UBK4348P 33
BB1UBK4918F 38
BB1UBK4918P 33
BB1UBK4924F 38
BB1UBK4924P 33
BB1UBK4930F 38
BB1UBK4930P 33
BB1UBK4936F 38
BB1UBK4936P 33
BB1UBK4942F 38
BB1UBK4942P 33
BB1UBK4948F 38
BB1UBK4948P 33
BB2FBK1618F 24
BB2FBK1618P 21
BB2FBK1624F 24
BB2FBK1624P 21
BB2FBK1630F 24
BB2FBK1630P 21
BB2FBK1636F 24
BB2FBK1636P 21
BB2FBK1642F 24
BB2FBK1642P 21
BB2FBK1648F 24
BB2FBK1648P 21
BB2FBK2218F 24
BB2FBK2218P 21
BB2FBK2224F 24
BB2FBK2224P 21
BB2FBK2230F 24
BB2FBK2230P 21
BB2FBK2236F 24
BB2FBK2236P 21
BB2FBK2242F 24
BB2FBK2242P 21
BB2FBK2248F 24
BB2FBK2248P 21
BB2FBK2518F 24
BB2FBK2518P 21
BB2FBK2524F 24
BB2FBK2524P 21
BB2FBK2530F 24
BB2FBK2530P 21
pattern no. page
BB2FBK2536F 24
BB2FBK2536P 21
BB2FBK2542F 24
BB2FBK2542P 21
BB2FBK2548F 24
BB2FBK2548P 21
BB2FBK2818F 24
BB2FBK2818P 21
BB2FBK2823F 24
BB2FBK2823P 21
BB2FBK2824F 24
BB2FBK2824P 21
BB2FBK2829F 24
BB2FBK2829P 21
BB2FBK2830F 24
BB2FBK2830P 21
BB2FBK2836F 24
BB2FBK2836P 21
BB2FBK2842F 24
BB2FBK2842P 21
BB2FBK2848F 24
BB2FBK2848P 21
BB2FBK4215F 24
BB2FBK4215P 21
BB2FBK4218F 24
BB2FBK4218P 21
BB2FBK4224F 24
BB2FBK4224P 21
BB2FBK4230F 24
BB2FBK4230P 21
BB2FBK4236F 24
BB2FBK4236P 21
BB2FBK4242F 24
BB2FBK4242P 21
BB2FBK4248F 24
BB2FBK4248P 21
BB2FBK5015F 25
BB2FBK5015P 22
BB2FBK5018F 25
BB2FBK5018P 22
BB2FBK5024F 25
BB2FBK5024P 22
BB2FBK5030F 25
BB2FBK5030P 22
BB2FBK5036F 25
BB2FBK5036P 22
BB2FBK5042F 25
BB2FBK5042P 22
BB2FBK5048F 25
BB2FBK5048P 22
BB2FBK5715F 26
BB2FBK5715P 23
BB2FBK5718F 26
BB2FBK5718P 23
BB2FBK5724F 26
BB2FBK5724P 23
BB2FBK5730F 26
BB2FBK5730P 23
BB2FBK5736F 26
BB2FBK5736P 23
BB2FBK5742F 26
BB2FBK5742P 23
BB2FBK5748F 26
BB2FBK5748P 23
BB2FBK6415F 26
pattern no. page
BB2FBK6415P 23
BB2FBK6418F 26
BB2FBK6418P 23
BB2FBK6424F 26
BB2FBK6424P 23
BB2FBK6430F 26
BB2FBK6430P 23
BB2FBK6436F 26
BB2FBK6436P 23
BB2FBK6442F 26
BB2FBK6442P 23
BB2FBK6448F 26
BB2FBK6448P 23
BB2FBK7115F 26
BB2FBK7115P 23
BB2FBK7118F 26
BB2FBK7118P 23
BB2FBK7124F 26
BB2FBK7124P 23
BB2FBK7130F 26
BB2FBK7130P 23
BB2FBK7136F 26
BB2FBK7136P 23
BB2FBK7142F 26
BB2FBK7142P 23
BB2FBK7148F 26
BB2FBK7148P 23
BB2FBK7818F 26
BB2FBK7818P 23
BB2FBK7824F 26
BB2FBK7824P 23
BB2FBK7830F 26
BB2FBK7830P 23
BB2FBK7836F 26
BB2FBK7836P 23
BB2FBK7842F 26
BB2FBK7842P 23
BB2FBK7848F 26
BB2FBK7848P 23
BB2LBK4218F 29
BB2LBK4218P 27
BB2LBK4224F 29
BB2LBK4224P 27
BB2LBK4230F 29
BB2LBK4230P 27
BB2LBK4236F 29
BB2LBK4236P 27
BB2LBK4242F 29
BB2LBK4242P 27
BB2LBK4248F 29
BB2LBK4248P 27
BB2LBK4418F 29
BB2LBK4418P 27
BB2LBK4424F 29
BB2LBK4424P 27
BB2LBK4430F 29
BB2LBK4430P 27
BB2LBK4436F 29
BB2LBK4436P 27
BB2LBK4442F 29
BB2LBK4442P 27
BB2LBK4448F 29
BB2LBK4448P 27
BB2LBK4918F 29
BB2LBK4918P 27
Template
115
pattern no. page
BB2LBK4924F 29
BB2LBK4924P 27
BB2LBK4930F 29
BB2LBK4930P 27
BB2LBK4936F 29
BB2LBK4936P 27
BB2LBK4942F 29
BB2LBK4942P 27
BB2LBK4948F 29
BB2LBK4948P 27
BB2LBK5118F 30
BB2LBK5118P 28
BB2LBK5124F 30
BB2LBK5124P 28
BB2LBK5130F 30
BB2LBK5130P 28
BB2LBK5136F 30
BB2LBK5136P 28
BB2LBK5142F 30
BB2LBK5142P 28
BB2LBK5148F 30
BB2LBK5148P 28
BB2LBK5618F 30
BB2LBK5618P 28
BB2LBK5624F 30
BB2LBK5624P 28
BB2LBK5630F 30
BB2LBK5630P 28
BB2LBK5636F 30
BB2LBK5636P 28
BB2LBK5642F 30
BB2LBK5642P 28
BB2LBK5648F 30
BB2LBK5648P 28
BB2LBK5818F 30
BB2LBK5818P 28
BB2LBK5824F 30
BB2LBK5824P 28
BB2LBK5830F 30
BB2LBK5830P 28
BB2LBK5836F 30
BB2LBK5836P 28
BB2LBK5842F 30
BB2LBK5842P 28
BB2LBK5848F 30
BB2LBK5848P 28
BC1CH10 108
BC1CSH24 84
BC1CSH30 84
BC1CSH36 84
BC1CSH42 84
BC1CSH48 84
BC1EP16NK(L/V) 12
BC1EP16NN(L/V) 12
BC1EP22NK(L/V) 12
BC1EP22NN(L/V) 12
BC1EP25KK(L/V) 12
BC1EP25KN(L/V) 12
BC1EP25NN(L/V) 12
BC1EP28KK(L/V) 12
BC1EP28KN(L/V) 12
BC1EP28NN(L/V) 12
BC1EP42KK(L/V) 12
BC1EP42KKS 11
BC1EP42KN(L/V) 12
pattern no. page
BC1EP42KNS 11
BC1EP42NN(L/V) 12
BC1EP42NNS 11
BC1EP50KK(L/V) 12
BC1EP50KKS 11
BC1EP50KN(L/V) 12
BC1EP50KNS 11
BC1EP50NN(L/V) 12
BC1EP50NNS 11
BC1EP57KK(L/V) 12
BC1EP57KKS 11
BC1EP57KN(L/V) 12
BC1EP57KNS 11
BC1EP57NN(L/V) 12
BC1EP57NNS 11
BC1EP64KK(L/V) 12
BC1EP64KKS 11
BC1EP64KN(L/V) 12
BC1EP64KNS 11
BC1EP64NN(L/V) 12
BC1EP64NNS 11
BC1EP71KK(L/V) 12
BC1EP71KKS 11
BC1EP71KN(L/V) 12
BC1EP71KNS 11
BC1EP71NN(L/V) 12
BC1EP71NNS 11
BC1EP78KK(L/V) 12
BC1EP78KKS 11
BC1EP78KN(L/V) 12
BC1EP78KNS 11
BC1EP78NN(L/V) 12
BC1EP78NNS 11
BC1EPDPB(L/R) 108
BC1ETOP1515(S/L/V) 20
BC1ETOP1518(S/L/V) 20
BC1ETOP1524(S/L/V) 20
BC1ETOP1530(S/L/V) 20
BC1ETOP1536(S/L/V) 20
BC1ETOP1542(S/L/V) 20
BC1ETOP1548(S/L/V) 20
BC1ETOP1560P(S/L/V) 20
BC1ETOP1572P(S/L/V) 20
BC1ETOPW1518(L/V) 19
BC1ETOPW1524(L/V) 19
BC1ETOPW1530(L/V) 19
BC1ETOPW1536(L/V) 19
BC1ETOPW1542(L/V) 19
BC1ETOPW1548(L/V) 19
BC1FFINS1618 49
BC1FFINS1624 49
BC1FFINS1630 49
BC1FFINS1636 49
BC1FFINS1642 49
BC1FFINS1648 49
BC1FFINS2218 49
BC1FFINS2224 49
BC1FFINS2230 49
BC1FFINS2236 49
BC1FFINS2242 49
BC1FFINS2248 49
BC1FFINS2518 49
BC1FFINS2524 49
BC1FFINS2530 49
BC1FFINS2536 49
pattern no. page
BC1FFINS2542 49
BC1FFINS2548 49
BC1FFINS2818 49
BC1FFINS2823 49
BC1FFINS2824 49
BC1FFINS2829 49
BC1FFINS2830 49
BC1FFINS2836 49
BC1FFINS2842 49
BC1FFINS2848 49
BC1FFINS4215 49
BC1FFINS4218 49
BC1FFINS4224 49
BC1FFINS4230 49
BC1FFINS4236 49
BC1FFINS4242 49
BC1FFINS4248 49
BC1FFINS5015 50
BC1FFINS5018 50
BC1FFINS5024 50
BC1FFINS5030 50
BC1FFINS5036 50
BC1FFINS5042 50
BC1FFINS5048 50
BC1FFINS5715 51
BC1FFINS5718 51
BC1FFINS5724 51
BC1FFINS5730 51
BC1FFINS5736 51
BC1FFINS5742 51
BC1FFINS5748 51
BC1FFINS6415 51
BC1FFINS6418 51
BC1FFINS6424 51
BC1FFINS6430 51
BC1FFINS6436 51
BC1FFINS6442 51
BC1FFINS6448 51
BC1FFINS7115 51
BC1FFINS7118 51
BC1FFINS7124 51
BC1FFINS7130 51
BC1FFINS7136 51
BC1FFINS7142 51
BC1FFINS7148 51
BC1FFINS7818 51
BC1FFINS7824 51
BC1FFINS7830 51
BC1FFINS7836 51
BC1FFINS7842 51
BC1FFINS7848 51
BC1FINSCLIP 108
BC1FINTAPE 108
BC1FVINS1618 52
BC1FVINS1624 52
BC1FVINS1630 52
BC1FVINS1636 52
BC1FVINS1642 52
BC1FVINS1648 52
BC1FVINS2218 52
BC1FVINS2224 52
BC1FVINS2230 52
BC1FVINS2236 52
BC1FVINS2242 52
BC1FVINS2248 52
pattern no. page
BC1FVINS2518 52
BC1FVINS2524 52
BC1FVINS2530 52
BC1FVINS2536 52
BC1FVINS2542 52
BC1FVINS2548 52
BC1FVINS2818 52
BC1FVINS2823 52
BC1FVINS2824 52
BC1FVINS2829 52
BC1FVINS2830 52
BC1FVINS2836 52
BC1FVINS2842 52
BC1FVINS2848 52
BC1FVINS4215 52
BC1FVINS4218 52
BC1FVINS4224 52
BC1FVINS4230 52
BC1FVINS4236 52
BC1FVINS4242 52
BC1FVINS4248 52
BC1FVINS5015 53
BC1FVINS5018 53
BC1FVINS5024 53
BC1FVINS5030 53
BC1FVINS5036 53
BC1FVINS5042 53
BC1FVINS5048 53
BC1FVINS5715 54
BC1FVINS5718 54
BC1FVINS5724 54
BC1FVINS5730 54
BC1FVINS5736 54
BC1FVINS5742 54
BC1FVINS5748 54
BC1FVINS6415 54
BC1FVINS6418 54
BC1FVINS6424 54
BC1FVINS6430 54
BC1FVINS6436 54
BC1FVINS6442 54
BC1FVINS6448 54
BC1FVINS7115 54
BC1FVINS7118 54
BC1FVINS7124 54
BC1FVINS7130 54
BC1FVINS7136 54
BC1FVINS7142 54
BC1FVINS7148 54
BC1FVINS7818 54
BC1FVINS7824 54
BC1FVINS7830 54
BC1FVINS7836 54
BC1FVINS7842 54
BC1FVINS7848 54
BC1INSTALL 108
BC1KP15 15
BC1KP156 16
BC1KP18 15
BC1KP186 16
BC1KP23 15
BC1KP236 16
BC1KP24 15
BC1KP246 16
BC1KP29 15
Template
116
pattern no. page
BC1KP296 16
BC1KP30 15
BC1KP306 16
BC1KP36 15
BC1KP366 16
BC1KP42 15
BC1KP426 16
BC1KP48 15
BC1KP486 16
BC1LFINS4218 55
BC1LFINS4224 55
BC1LFINS4230 55
BC1LFINS4236 55
BC1LFINS4242 55
BC1LFINS4248 55
BC1LFINS4418 55
BC1LFINS4424 55
BC1LFINS4430 55
BC1LFINS4436 55
BC1LFINS4442 55
BC1LFINS4448 55
BC1LFINS4918 55
BC1LFINS4924 55
BC1LFINS4930 55
BC1LFINS4936 55
BC1LFINS4942 55
BC1LFINS4948 55
BC1LFINS5118 56
BC1LFINS5124 56
BC1LFINS5130 56
BC1LFINS5136 56
BC1LFINS5142 56
BC1LFINS5148 56
BC1LFINS5618 56
BC1LFINS5624 56
BC1LFINS5630 56
BC1LFINS5636 56
BC1LFINS5642 56
BC1LFINS5648 56
BC1LFINS5818 56
BC1LFINS5824 56
BC1LFINS5830 56
BC1LFINS5836 56
BC1LFINS5842 56
BC1LFINS5848 56
BC1LVINS4218 57
BC1LVINS4224 57
BC1LVINS4230 57
BC1LVINS4236 57
BC1LVINS4242 57
BC1LVINS4248 57
BC1LVINS4418 57
BC1LVINS4424 57
BC1LVINS4430 57
BC1LVINS4436 57
BC1LVINS4442 57
BC1LVINS4448 57
BC1LVINS4918 57
BC1LVINS4924 57
BC1LVINS4930 57
BC1LVINS4936 57
BC1LVINS4942 57
BC1LVINS4948 57
BC1LVINS5118 58
BC1LVINS5124 58
pattern no. page
BC1LVINS5130 58
BC1LVINS5136 58
BC1LVINS5142 58
BC1LVINS5148 58
BC1LVINS5618 58
BC1LVINS5624 58
BC1LVINS5630 58
BC1LVINS5636 58
BC1LVINS5642 58
BC1LVINS5648 58
BC1LVINS5818 58
BC1LVINS5824 58
BC1LVINS5830 58
BC1LVINS5836 58
BC1LVINS5842 58
BC1LVINS5848 58
BC1MFINS1418 67
BC1MFINS1424 67
BC1MFINS1430 67
BC1MFINS1436 67
BC1MFINS1442 67
BC1MFINS1448 67
BC1MFINS1460 67
BC1MFINS1472 67
BC1MFINS1618 68
BC1MFINS1624 68
BC1MFINS1630 68
BC1MFINS1636 68
BC1MFINS1642 68
BC1MFINS1648 68
BC1MFINS1660 68
BC1MFINS1672 68
BC1MFINS2018 67
BC1MFINS2024 67
BC1MFINS2030 67
BC1MFINS2036 67
BC1MFINS2042 67
BC1MFINS2048 67
BC1MFINS2060 67
BC1MFINS2072 67
BC1MFINS2118 68
BC1MFINS2124 68
BC1MFINS2130 68
BC1MFINS2136 68
BC1MFINS2142 68
BC1MFINS2148 68
BC1MFINS2160 68
BC1MFINS2172 68
BC1MFINS2218 68
BC1MFINS2224 68
BC1MFINS2230 68
BC1MFINS2236 68
BC1MFINS2242 68
BC1MFINS2248 68
BC1MFINS2260 68
BC1MFINS2272 68
BC1MFINS2318 69
BC1MFINS2324 69
BC1MFINS2330 69
BC1MFINS2336 69
BC1MFINS2342 69
BC1MFINS2348 69
BC1MFINS2360 69
BC1MFINS2372 69
BC1MFINS2718 68
pattern no. page
BC1MFINS2724 68
BC1MFINS2730 68
BC1MFINS2736 68
BC1MFINS2742 68
BC1MFINS2748 68
BC1MFINS2760 68
BC1MFINS2772 68
BC1MFINS2818 69
BC1MFINS2824 69
BC1MFINS2830 69
BC1MFINS2836 69
BC1MFINS2842 69
BC1MFINS2848 69
BC1MFINS2860 69
BC1MFINS2872 69
BC1MFINS2918 69
BC1MFINS2924 69
BC1MFINS2930 69
BC1MFINS2936 69
BC1MFINS2942 69
BC1MFINS2948 69
BC1MFINS2960 69
BC1MFINS2972 69
BC1MFINS3018 70
BC1MFINS3024 70
BC1MFINS3030 70
BC1MFINS3036 70
BC1MFINS3042 70
BC1MFINS3048 70
BC1MFINS3060 70
BC1MFINS3072 70
BC1MFINS3418 69
BC1MFINS3424 69
BC1MFINS3430 69
BC1MFINS3436 69
BC1MFINS3442 69
BC1MFINS3448 69
BC1MFINS3460 69
BC1MFINS3472 69
BC1MFINS3618 70
BC1MFINS3624 70
BC1MFINS3630 70
BC1MFINS3636 70
BC1MFINS3642 70
BC1MFINS3648 70
BC1MFINS3660 70
BC1MFINS3672 70
BC1MP16N(L/V) 14
BC1MP22N(L/V) 14
BC1MP25K(L/V) 14
BC1MP25N(L/V) 14
BC1MP28K(L/V) 14
BC1MP28N(L/V) 14
BC1MP42K(L/V) 14
BC1MP42KS 13
BC1MP42N(L/V) 14
BC1MP42NS 13
BC1MP50K(L/V) 14
BC1MP50KS 13
BC1MP50N(L/V) 14
BC1MP50NS 13
BC1MP57K(L/V) 14
BC1MP57KS 13
BC1MP57N(L/V) 14
BC1MP57NS 13
pattern no. page
BC1MP64K(L/V) 14
BC1MP64KS 13
BC1MP64N(L/V) 14
BC1MP64NS 13
BC1MP71K(L/V) 14
BC1MP71KS 13
BC1MP71N(L/V) 14
BC1MP71NS 13
BC1MP78K(L/V) 14
BC1MP78KS 13
BC1MP78N(L/V) 14
BC1MP78NS 13
BC1MTOP1515(S/L/V) 20
BC1MTOP1518(S/L/V) 20
BC1MTOP1524(S/L/V) 20
BC1MTOP1530(S/L/V) 20
BC1MTOP1536(S/L/V) 20
BC1MTOP1542(S/L/V) 20
BC1MTOP1548(S/L/V) 20
BC1MTOP1560P(S/L/V) 20
BC1MTOP1572P(S/L/V) 20
BC1MTOPW1524(L/V) 19
BC1MTOPW1530(L/V) 19
BC1MTOPW1536(L/V) 19
BC1MTOPW1542(L/V) 19
BC1MTOPW1548(L/V) 19
BC1MVINS1418 71
BC1MVINS1424 71
BC1MVINS1430 71
BC1MVINS1436 71
BC1MVINS1442 71
BC1MVINS1448 71
BC1MVINS1460 71
BC1MVINS1472 71
BC1MVINS1618 72
BC1MVINS1624 72
BC1MVINS1630 72
BC1MVINS1636 72
BC1MVINS1642 72
BC1MVINS1648 72
BC1MVINS1660 72
BC1MVINS1672 72
BC1MVINS2018 71
BC1MVINS2024 71
BC1MVINS2030 71
BC1MVINS2036 71
BC1MVINS2042 71
BC1MVINS2048 71
BC1MVINS2060 71
BC1MVINS2072 71
BC1MVINS2118 72
BC1MVINS2124 72
BC1MVINS2130 72
BC1MVINS2136 72
BC1MVINS2142 72
BC1MVINS2148 72
BC1MVINS2160 72
BC1MVINS2172 72
BC1MVINS2218 72
BC1MVINS2224 72
BC1MVINS2230 72
BC1MVINS2236 72
BC1MVINS2242 72
BC1MVINS2248 72
BC1MVINS2260 72
Template
117
pattern no. page
BC1MVINS2272 72
BC1MVINS2318 73
BC1MVINS2324 73
BC1MVINS2330 73
BC1MVINS2336 73
BC1MVINS2342 73
BC1MVINS2348 73
BC1MVINS2360 73
BC1MVINS2372 73
BC1MVINS2718 72
BC1MVINS2724 72
BC1MVINS2730 72
BC1MVINS2736 72
BC1MVINS2742 72
BC1MVINS2748 72
BC1MVINS2760 72
BC1MVINS2772 72
BC1MVINS2818 73
BC1MVINS2824 73
BC1MVINS2830 73
BC1MVINS2836 73
BC1MVINS2842 73
BC1MVINS2848 73
BC1MVINS2860 73
BC1MVINS2872 73
BC1MVINS2918 73
BC1MVINS2924 73
BC1MVINS2930 73
BC1MVINS2936 73
BC1MVINS2942 73
BC1MVINS2948 73
BC1MVINS2960 73
BC1MVINS2972 73
BC1MVINS3018 74
BC1MVINS3024 74
BC1MVINS3030 74
BC1MVINS3036 74
BC1MVINS3042 74
BC1MVINS3048 74
BC1MVINS3060 74
BC1MVINS3072 74
BC1MVINS3418 73
BC1MVINS3424 73
BC1MVINS3430 73
BC1MVINS3436 73
BC1MVINS3442 73
BC1MVINS3448 73
BC1MVINS3460 73
BC1MVINS3472 73
BC1MVINS3618 74
BC1MVINS3624 74
BC1MVINS3630 74
BC1MVINS3636 74
BC1MVINS3642 74
BC1MVINS3648 74
BC1MVINS3660 74
BC1MVINS3672 74
BC1PT1C 109
BC1PT1N 109
BC1PT4C 109
BC1PT4N 109
BC1PT8C 109
BC1PT8N 109
BC1PTH1 108
BC1PTH4 108
pattern no. page
BC1PTH8 108
BC1PWS(L/R) 108
BC1SDIV12 89
BC1SDIV124 91
BC1SDIV128 93
BC1SDIV13 89
BC1SDIV134 91
BC1SDIV138 93
BC1SDIV14 89
BC1SDIV144 91
BC1SDIV148 93
BC1SDIV4 89
BC1SDIV44 90
BC1SDIV48 92
BC1SDIV5 89
BC1SDIV54 90
BC1SDIV58 92
BC1SDIV6 89
BC1SDIV64 90
BC1SDIV68 92
BC1SDIV7 89
BC1SDIV74 90
BC1SDIV78 92
BC1SH15(S/V) 83
BC1SH18(S/V) 83
BC1SH23(S/V) 83
BC1SH24(S/V) 83
BC1SH29(S/V) 83
BC1SH30(S/V) 83
BC1SH36(S/V) 83
BC1SH42(S/V) 83
BC1SH48(S/V) 83
BC1SH515(S/V) 83
BC1SH518(S/V) 83
BC1SH523(S/V) 83
BC1SH524(S/V) 83
BC1SH529(S/V) 83
BC1SH530(S/V) 83
BC1SH536(S/V) 83
BC1SH542(S/V) 83
BC1SH548(S/V) 83
BC1SH560(S/V) 83
BC1SH572(S/V) 83
BC1SH60(S/V) 83
BC1SH72(S/V) 83
BC1SHFF15 110
BC1SHFF18 110
BC1SHFF23 110
BC1SHFF24 110
BC1SHFF29 110
BC1SHFF30 110
BC1SHFF36 110
BC1SHFF42 110
BC1SHFF48 110
BC1SHFP15 110
BC1SHFP18 110
BC1SHFP23 110
BC1SHFP24 110
BC1SHFP29 110
BC1SHFP30 110
BC1SHFP36 110
BC1SHFP42 110
BC1SHFP48 110
BC1SSHK23 83
BC1SSHK24 83
pattern no. page
BC1SSHK29 83
BC1SSHK30 83
BC1SSHK36 83
BC1SSHK42 83
BC1SSHK48 83
BC1SSPAR4 110
BC1SSPAR8 110
BC1TDBAR 108
BC1TOP1524(S/L/V) 18
BC1TOP1529(L/V) 18
BC1TOP1530(S/L/V) 18
BC1TOP1535(L/V) 18
BC1TOP1536(S/L/V) 18
BC1TOP1541(L/V) 18
BC1TOP1542(S/L/V) 18
BC1TOP1547(S/L/V) 18
BC1TOP1548(S/L/V) 18
BC1TOP1553(S/L/V) 18
BC1TOP1559(S/L/V) 18
BC1TOP1560P(S/L/V) 18
BC1TOP1565(S/L/V) 18
BC1TOP1570(S/L/V) 18
BC1TOP1571(S/L/V) 18
BC1TOP1572P(S/L/V) 18
BC1TOP1576(L/V) 18
BC1TOP1577(S/L/V) 18
BC1TOP1582(L/V) 18
BC1TOP1583(S/L/V) 18
BC1TOP1588(L/V) 18
BC1TOP1589(L/V) 18
BC1TOP1594(L/V) 18
BC1TOP1595(L/V) 18
BC1TOPW1524(L/V) 17
BC1TOPW1529(L/V) 17
BC1TOPW1530(L/V) 17
BC1TOPW1535(L/V) 17
BC1TOPW1536(L/V) 17
BC1TOPW1541(L/V) 17
BC1TOPW1542(L/V) 17
BC1TOPW1547(L/V) 17
BC1TOPW1548(L/V) 17
BC1TOPW1553(L/V) 17
BC1TOPW1559(L/V) 17
BC1TOPW1565(L/V) 17
BC1TOPW1570(L/V) 17
BC1TOPW1571(L/V) 17
BC1TOPW1576(L/V) 17
BC1TOPW1577(L/V) 17
BC1TOPW1582(L/V) 17
BC1TOPW1583(L/V) 17
BC1TOPW1588(L/V) 17
BC1TOPW1589(L/V) 17
BC1TOPW1594(L/V) 17
BC1TOPW1595(L/V) 17
BC1UFINS1418 59
BC1UFINS1424 59
BC1UFINS1430 59
BC1UFINS1436 59
BC1UFINS1442 59
BC1UFINS1448 59
BC1UFINS1518 59
BC1UFINS1524 59
BC1UFINS1530 59
BC1UFINS1536 59
BC1UFINS1542 59
pattern no. page
BC1UFINS1548 59
BC1UFINS1560 59
BC1UFINS1572 59
BC1UFINS2018 59
BC1UFINS2024 59
BC1UFINS2030 59
BC1UFINS2036 59
BC1UFINS2042 59
BC1UFINS2048 59
BC1UFINS2060 59
BC1UFINS2072 59
BC1UFINS2218 60
BC1UFINS2224 60
BC1UFINS2230 60
BC1UFINS2236 60
BC1UFINS2242 60
BC1UFINS2248 60
BC1UFINS2818 61
BC1UFINS2824 61
BC1UFINS2830 61
BC1UFINS2836 61
BC1UFINS2842 61
BC1UFINS2848 61
BC1UFINS2918 61
BC1UFINS2924 61
BC1UFINS2930 61
BC1UFINS2936 61
BC1UFINS2942 61
BC1UFINS2948 61
BC1UFINS3518 61
BC1UFINS3524 61
BC1UFINS3530 61
BC1UFINS3536 61
BC1UFINS3542 61
BC1UFINS3548 61
BC1UFINS3618 62
BC1UFINS3624 62
BC1UFINS3630 62
BC1UFINS3636 62
BC1UFINS3642 62
BC1UFINS3648 62
BC1UFINS4218 63
BC1UFINS4224 63
BC1UFINS4230 63
BC1UFINS4236 63
BC1UFINS4242 63
BC1UFINS4248 63
BC1UFINS4318 63
BC1UFINS4324 63
BC1UFINS4330 63
BC1UFINS4336 63
BC1UFINS4342 63
BC1UFINS4348 63
BC1UFINS4918 63
BC1UFINS4924 63
BC1UFINS4930 63
BC1UFINS4936 63
BC1UFINS4942 63
BC1UFINS4948 63
BC1UVINS1418 64
BC1UVINS1424 64
BC1UVINS1430 64
BC1UVINS1436 64
BC1UVINS1442 64
BC1UVINS1448 64
Template
118
pattern no. page
BC1UVINS1518 64
BC1UVINS1524 64
BC1UVINS1530 64
BC1UVINS1536 64
BC1UVINS1542 64
BC1UVINS1548 64
BC1UVINS1560 64
BC1UVINS1572 64
BC1UVINS2018 64
BC1UVINS2024 64
BC1UVINS2030 64
BC1UVINS2036 64
BC1UVINS2042 64
BC1UVINS2048 64
BC1UVINS2060 64
BC1UVINS2072 64
BC1UVINS2218 64
BC1UVINS2224 64
BC1UVINS2230 64
BC1UVINS2236 64
BC1UVINS2242 64
BC1UVINS2248 64
BC1UVINS2818 65
BC1UVINS2824 65
BC1UVINS2830 65
BC1UVINS2836 65
BC1UVINS2842 65
BC1UVINS2848 65
BC1UVINS2918 65
BC1UVINS2924 65
BC1UVINS2930 65
BC1UVINS2936 65
BC1UVINS2942 65
BC1UVINS2948 65
BC1UVINS3518 65
BC1UVINS3524 65
BC1UVINS3530 65
BC1UVINS3536 65
BC1UVINS3542 65
BC1UVINS3548 65
BC1UVINS3618 65
BC1UVINS3624 65
BC1UVINS3630 65
BC1UVINS3636 65
BC1UVINS3642 65
BC1UVINS3648 65
BC1UVINS4218 66
BC1UVINS4224 66
BC1UVINS4230 66
BC1UVINS4236 66
BC1UVINS4242 66
BC1UVINS4248 66
BC1UVINS4318 66
BC1UVINS4324 66
BC1UVINS4330 66
BC1UVINS4336 66
BC1UVINS4342 66
BC1UVINS4348 66
BC1UVINS4918 66
BC1UVINS4924 66
BC1UVINS4930 66
BC1UVINS4936 66
BC1UVINS4942 66
BC1UVINS4948 66
BC1WSHK118(L/V) 85
pattern no. page
BC1WSHK124(L/V) 85
BC1WSHK130(L/V) 85
BC1WSHK136(L/V) 85
BC1WSHK142(L/V) 85
BC1WSHK148(L/V) 85
BC1WSHK160(L/V) 85
BC1WSHK172(L/V) 85
BC1WSHK218(L/V) 85
BC1WSHK224(L/V) 85
BC1WSHK230(L/V) 85
BC1WSHK236(L/V) 85
BC1WSHK242(L/V) 85
BC1WSHK248(L/V) 85
BC1WSHK260(L/V) 85
BC1WSHK272(L/V) 85
BC1WSHKGROM10 110
BC2BASE15EG(K) 15
BC2BASE15E(K) 15
BC2BASE18EG(K) 15
BC2BASE18E(K) 15
BC2BASE18N(K) 15
BC2BASE23EG(K) 15
BC2BASE23E(K) 15
BC2BASE23N(K) 15
BC2BASE24EG(K) 15
BC2BASE24E(K) 15
BC2BASE24N(K) 15
BC2BASE29EG(K) 15
BC2BASE29E(K) 15
BC2BASE29N(K) 15
BC2BASE30EG(K) 15
BC2BASE30E(K) 15
BC2BASE30N(K) 15
BC2BASE36EG(K) 15
BC2BASE36E(K) 15
BC2BASE36N(K) 15
BC2BASE42EG(K) 15
BC2BASE42E(K) 15
BC2BASE42N(K) 15
BC2BASE48EG(K) 15
BC2BASE48E(K) 15
BC2BASE48N(K) 15
BC2BASEKC10 16
BC2USK15601(S/L/V) 86
BC2USK15602(S/L/V) 87
BC2USK1560(S/L/V) 86
BC2USK15721(S/L/V) 86
BC2USK15722(S/L/V) 87
BC2USK1572(S/L/V) 86
BC2USK20601(S/L/V) 87
BC2USK20602(S/L/V) 88
BC2USK2060(S/L/V) 86
BC2USK20721(S/L/V) 87
BC2USK20722(S/L/V) 88
BC2USK2072(S/L/V) 86
BD1BPAR6 109
BD1CBK18 109
BD1CBK24 109
BD1CBK30 109
BD1CBK36 109
BD1CBK42 109
BD1CBK48 109
BD1FHDK1524(L/R)N 80
BD1FHDK1530N 80
BD1FHDK1536N 80
pattern no. page
BD1FHDK1542N 80
BD1FHDK1548N 80
BD1FHDK2024(L/R)N 80
BD1FHDK2030N 80
BD1FHDK2036N 80
BD1FHDK2042N 80
BD1FHDK2048N 80
BD1FHDK2818(L/R)N 80
BD1FHDK2824(L/R)N 80
BD1FHDK2830N 80
BD1FHDK2836N 80
BD1FHDK2842N 80
BD1FHDK2848N 80
BD1FHDK4215(L/R)N 80
BD1FHDK4218(L/R)N 80
BD1FHDK4224(L/R)N 80
BD1FHDK4230N 80
BD1FHDK4236N 80
BD1FHDK4242N 80
BD1FHDK4248N 80
BD1FHDK5015(L/R)N 81
BD1FHDK5018(L/R)N 81
BD1FHDK5024(L/R)N 81
BD1FHDK5030N 81
BD1FHDK5036N 81
BD1FHDK5042N 81
BD1FHDK5048N 81
BD1FHDK5715(L/R)N 81
BD1FHDK5718(L/R)N 81
BD1FHDK5724(L/R)N 81
BD1FHDK5730N 81
BD1FHDK5736N 81
BD1FHDK5742N 81
BD1FHDK5748N 81
BD1FHDK6415(L/R)N 81
BD1FHDK6418(L/R)N 81
BD1FHDK6424(L/R)N 81
BD1FHDK6430N 81
BD1FHDK6436N 81
BD1FHDK6442N 81
BD1FHDK6448N 81
BD1FHDK7115(L/R)N 82
BD1FHDK7118(L/R)N 82
BD1FHDK7124(L/R)N 82
BD1FHDK7130N 82
BD1FHDK7136N 82
BD1FHDK7142N 82
BD1FHDK7148N 82
BD1FHDK7818(L/R)N 82
BD1FHDK7824(L/R)N 82
BD1FHDK7830N 82
BD1FHDK7836N 82
BD1FHDK7842N 82
BD1FHDK7848N 82
BD1FPAR6 109
BD1FSDK1630N 77
BD1FSDK1636N 77
BD1FSDK1642N 77
BD1FSDK1648N 77
BD1FSDK2230N 77
BD1FSDK2236N 77
BD1FSDK2242N 77
BD1FSDK2248N 77
BD1FSDK2530N 77
BD1FSDK2536N 77
pattern no. page
BD1FSDK2542N 77
BD1FSDK2548N 77
BD1FSDK2829N 77
BD1FSDK2830N 77
BD1FSDK2836N 77
BD1FSDK2842N 77
BD1FSDK2848N 77
BD1FSDK4230N 77
BD1FSDK4236N 77
BD1FSDK4242N 77
BD1FSDK4248N 77
BD1FSDK5030N 78
BD1FSDK5036N 78
BD1FSDK5042N 78
BD1FSDK5048N 78
BD1TSDK1530N 79
BD1TSDK1536N 79
BD1TSDK1542N 79
BD1TSDK1548N 79
BD1TSDK1560N 79
BD1TSDK1572N 79
BD1TSDK2030N 79
BD1TSDK2036N 79
BD1TSDK2042N 79
BD1TSDK2048N 79
BD1TSDK2060N 79
BD1TSDK2072N 79
BD2BBDK18N 75
BD2BBDK18NL 76
BD2BBDK24N 75
BD2BBDK24NL 76
BD2BBDK30N 75
BD2BBDK30NL 76
BD2BBDK36N 75
BD2BBDK36NL 76
BD2BBDK42N 75
BD2BBDK42NL 76
BD2BBDK48N 75
BD2BBDK48NL 76
BD2BBFDK18N 75
BD2BBFDK18NL 76
BD2BBFDK24N 75
BD2BBFDK24NL 76
BD2BBFDK30N 75
BD2BBFDK30NL 76
BD2BBFDK36N 75
BD2BBFDK36NL 76
BD2BBFDK42N 75
BD2BBFDK42NL 76
BD2BBFDK48N 75
BD2BBFDK48NL 76
BD2BFDK18N 75
BD2BFDK18NL 76
BD2BFDK24N 75
BD2BFDK24NL 76
BD2BFDK30N 75
BD2BFDK30NL 76
BD2BFDK36N 75
BD2BFDK36NL 76
BD2BFDK42N 75
BD2BFDK42NL 76
BD2BFDK48N 75
BD2BFDK48NL 76
BD2FDK18N 75
BD2FDK18NL 76
Template
119
pattern no. page
BD2FDK24N 75
BD2FDK24NL 76
BD2FDK30N 75
BD2FDK30NL 76
BD2FDK36N 75
BD2FDK36NL 76
BD2FDK42N 75
BD2FDK42NL 76
BD2FDK48N 75
BD2FDK48NL 76
BD2FDKB18NL 76
BD2FDKB24NL 76
BD2FDKB30NL 76
BD2FDKB36NL 76
BD2FDKB42NL 76
BD2FDKB48NL 76
BD2FFDK18N 75
BD2FFDK18NL 76
BD2FFDK24N 75
BD2FFDK24NL 76
BD2FFDK30N 75
BD2FFDK30NL 76
BD2FFDK36N 75
BD2FFDK36NL 76
BD2FFDK42N 75
BD2FFDK42NL 76
BD2FFDK48N 75
BD2FFDK48NL 76
BE2BDB8 94
BE2BDUP6(1/2/3/3D/4D) 94, 99
BE2BI872 94
BE2BI872NY 94
BE2BI872SF 94
BE2BPJ8102 94, 99
BE2BPJ8108 94, 99
BE2BPJ8114 94, 99
BE2BPJ8120 94, 99
BE2BPJ824 94, 99
BE2BPJ830 94, 99
BE2BPJ836 94, 99
BE2BPJ842 94, 99
BE2BPJ848 94, 99
BE2BPJ854 94, 99
BE2BPJ860 94, 99
BE2BPJ866 94, 99
BE2BPJ872 94, 99
BE2BPJ878 94, 99
BE2BPJ884 94, 99
BE2BPJ890 94, 99
BE2BPJ896 94, 99
BE2BTB8 94
BE2DTJ822 100
BE2DTJ822-2 100
BE2DTJ825 100
BE2DTJ825-2 100
BE2DTJ828 100
BE2DTJ828-2 100
BE2DTJ831 100
BE2DTJ831-2 100
BE2DTJ834 100
BE2DTJ834-2 100
BE2DTJ837 100
BE2DTJ837-2 100
BE2DTJ840 100
BE2DTJ840-2 100
pattern no. page
BE2EPM8DD(1/2/3/3D/4D) 95
BE2EPM8DD(14D/24D/34D/13D/23D) 96
BE2EPM8DU(1/2/3/3D/4D) 95
BE2EPM8DU(14D/24D/34D/13D/23D) 96
BE2EPM8UD(1/2/3/3D/4D) 95
BE2EPM8UD(14D/24D/34D/13D/23D) 96
BE2KC10 94
BE2WMBD 99
BE2WMDE(1/2/3/3D/4D)108J(W/B) 98
BE2WMDE72C(W/B) 97
BE2WMUE(1/2/3/3D/4D)108J(W/B) 98
BE2WMUE72C(W/B) 97
BL4L17 111
BL4L31 111
BL4L44 111
BL4L58 111
BW1CSB 107
BW1FB18 107
BW1FB1810 107
BW1FB24 107
BW1FB2410 107
BW1FB30 107
BW1FB3010 107
BW1R3618P(L/V) 101
BW1R3618T(L/V) 101
BW1R3624P(L/V) 102
BW1R3624T(L/V) 102
BW1R3630P(L/V) 103
BW1R3630T(L/V) 103
BW1R4218P(L/V) 101
BW1R4218T(L/V) 101
BW1R4224P(L/V) 102
BW1R4224T(L/V) 102
BW1R4230P(L/V) 103
BW1R4230T(L/V) 103
BW1R4818P(L/V) 101
BW1R4818T(L/V) 101
BW1R4824P(L/V) 102
BW1R4824T(L/V) 102
BW1R4830P(L/V) 103
BW1R4830T(L/V) 103
BW1R5418P(L/V) 101
BW1R5418T(L/V) 101
BW1R5424P(L/V) 102
BW1R5424T(L/V) 102
BW1R5430P(L/V) 103
BW1R5430T(L/V) 103
BW1R6018P(L/V) 101
BW1R6018T(L/V) 101
BW1R6024P(L/V) 102
BW1R6024T(L/V) 102
BW1R6030P(L/V) 103
BW1R6030T(L/V) 103
BW1R6036P(L/V) 103
BW1R6036T(L/V) 103
BW1R6618P(L/V) 101
BW1R6618T(L/V) 101
BW1R6624P(L/V) 102
BW1R6624T(L/V) 102
BW1R6630P(L/V) 103
BW1R6630T(L/V) 103
BW1R6636P(L/V) 103
BW1R6636T(L/V) 103
BW1R7218P(L/V) 101
BW1R7218T(L/V) 101
pattern no. page
BW1R7224P(L/V) 102
BW1R7224T(L/V) 102
BW1R7230P(L/V) 103
BW1R7230T(L/V) 103
BW1R7236P(L/V) 103
BW1R7236T(L/V) 103
BW1R7818P(L/V) 101
BW1R7818T(L/V) 101
BW1R7824P(L/V) 102
BW1R7824T(L/V) 102
BW1R7830P(L/V) 103
BW1R7830T(L/V) 103
BW1R8418P(L/V) 101
BW1R8418T(L/V) 101
BW1R8424P(L/V) 102
BW1R8424T(L/V) 102
BW1R8430P(L/V) 103
BW1R8430T(L/V) 103
BW1SCR 107
BW1SL18P 107
BW1SL18T 107
BW1SL24P 107
BW1SL24T 107
BW1SL30P 107
BW1SL30T 107
BW1SL36P 107
BW1SL36T 107
BW1SL5424T(L/V) 106
BW1SL6024T(L/V) 106
BW1SR5424T(L/V) 106
BW1SR6024T(L/V) 106
BW1T481824P(L/V) 104
BW1T481824T(L/V) 104
BW1T482418P(L/V) 104
BW1T482418T(L/V) 104
BW1T482430P(L/V) 105
BW1T482430T(L/V) 105
BW1T483024P(L/V) 105
BW1T483024T(L/V) 105
BW1T541824P(L/V) 104
BW1T541824T(L/V) 104
BW1T542418P(L/V) 104
BW1T542418T(L/V) 104
BW1T542430P(L/V) 105
BW1T542430T(L/V) 105
BW1T543024P(L/V) 105
BW1T543024T(L/V) 105
BW1T601824P(L/V) 104
BW1T601824T(L/V) 104
BW1T602418P(L/V) 104
BW1T602418T(L/V) 104
BW1T602430P(L/V) 105
BW1T602430T(L/V) 105
BW1T603024P(L/V) 105
BW1T603024T(L/V) 105
BW1T721824P(L/V) 104
BW1T721824T(L/V) 104
BW1T722418P(L/V) 104
BW1T722418T(L/V) 104
BW1T722430P(L/V) 105
BW1T722430T(L/V) 105
BW1T723024P(L/V) 105
BW1T723024T(L/V) 105
BW1WR54 107
BW1WR60 107
pattern no. page
BW1WR66 107
BW1WR72 107
BW1WR78 107
BW1WR84 107
Template
120
This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions
of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Selling Policy
121June 15, 2019
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
122June 15, 2019
KnollKey Lock Program
KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.
Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.
Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.
Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.
There is no charge for key-alike orders if placed with the furniture order.
IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.
If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.
Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.
KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.
Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.
Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.
Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.
How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.
Step 1 - Using the project floorplan, count the number of locks in eachworkstation.
Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.
5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station
Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.
Qty Pattern # Description Unit List Ext. List
5
Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
Step 5 - Repeat for other groups.
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
3 KSPEC 4 Set of 4 cores/keys N / C N / C
2 KSPEC 5 Set of 5 cores/keys N / C N / C
Your Key instructions are complete.
Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.
Service PartsPattern # Description List Price
KKEY_ _ _ Shrouded KeySpecify key number desired
$10
KBLANK Shrouded Key Blank $10
KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired
$22
KCHANGE Change Key $10
HLKRKMASTER* Master Key $10
*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.
123
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
124
Recommended