View
0
Download
0
Category
Preview:
Citation preview
Turn
ing Your Assets into Dollars
Public AuctionPLANT
CLOSED
EVERYTHINGMUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com info@asset-sales.com
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax 07836.347880peteraml@asset-sales.co.uk
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
gmuller@asset-sales.ca
PLANT CLOSED
CURTIS FABRICATIONMAJOR TRUMPF CNC LASER, PRESS BRAKE & FABRICATING FACILITY
5448 BLUFF RD. - COLUMBIA, SC 29209TUESDAY, OCTOBER 27TH @ 10:00 A.M. EDT
Inspection: Monday, October 26th, From 8:00 A.M. - 4:00 P.M. EDT
WYSONG 400 TON 4-AXIS CNC HYDRAULIC PRESS BRAKE
MID-ATLANTIC 5 TON TOP RUNNING FREE STANDING BRIDGE CRANE
ROUNDO 10' X 1/2" PLATE ROLL BENDING MACHINE
TRUMPF 4000 WATT 4-AXIS CNC LASER CUTTER TRUMATIC TURBO L6030
5TON 1990
4000WATT
400TON
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 26TH FROM 8:00 A.M. - 4:00 P.M. EDT
2
CNC PRESS BRAKESWYSONG 400 Ton 4-Axis CNC Hydraulic Press Brake Model F80-400-240 with 20’ Over All Length x 400 Ton, 18’ 5-1/2” Between Housing, PC Pendant Control Retroffited in 2011, Pedestal Control, Wila Multi-V Adjustable Bottom Die (1/2”-2”), sn:HPF11-100X
ACCURPRESS 175 Ton CNC Hydraulic Press Brake Model 717512 with 12’ x 175 Ton, Tonnage Gauge, Counter, 2-Axis, 10’ 6” Between Housings, Flush Floor, CNC 99 Automec CNC Control, sn:1772
TRUMPF 130 Ton 4-Axis CNC Hydraulic Press Brake Model TruBend 3120 with 120” Over All Length x 130 Ton, 4-Axis, Selfacting Crowning System, 7.87” Stroke, Trumpf CNC Pendant & Pedestal Control with Foot Switch, sn:B0204A0099, mfg.2006
TRUMPF 61 Ton 4-Axis CNC Hydraulic Press Brake Model TrumaBend C60 with 82” Over All Length x 61 Ton, 4-Axis, 69” Between Housing, 7.87” Stroke, Trumpf CNC Pendant & Pedestal Control with Foot Switch, sn:886310, mfg.2002
Assortment of TRUMPF Brake Dies & Die Racks
Assortment of WYSONG Press Brake Dies
Assortment of ACCURPRESS Brake Dies & Rack
WYSONG 400 TON 4-AXIS CNC HYDRAULIC PRESS BRAKE
TRUMPF 61 TON 4-AXIS CNC HYDRAULIC PRESS BRAKE
ACCURPRESS 175 TON CNC HYDRAULIC PRESS BRAKE
TRUMPF 130 TON 4-AXIS CNC HYDRAULIC PRESS BRAKE
2006 2002
ASSORTED BRAKE DIES & DIE RACKS
400TON
175TON
AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 27TH 10:00 A.M. EDT
3
TRUMPF 4000 WATT 4-AXIS CNC LASER CUTTER TRUMATIC TURBO L6030
TRUMPF 4000 WATT 3-AXIS CNC LASER CUTTER TRULASER 3030
CNC LASERSTRUMPF 4000 Watt 4-Axis CNC Laser Cutter Model Trumatic Turbo L6030 with (2) 80” x 240” Pallets, Rotolas Package Axis for Tube Cutting, Chiller, Trumpf CNC Control, sn:131081 (cost new $1,095,000)
TRUMPF 4000 Watt 3-Axis CNC Laser Cutter Model Trulaser 3030 with 5’ x 10’ Capacity, (2) Pallet Shuttle Tables, Trumpf CNC Control, sn:A0220A1996, mfg.2007
CNC WATERJETTECHNI Model i510 Intec 5’ x 10’ Waterjet with 8” Maximum Cutting Thickness, 60,000 PSI, TECHNI Chiller, KMT Intec Pump, Speedaire Air Dryer, Filter, Sandpot, Water Reclamation System, TECHNI Waterjet Softec CNC Control, sn:339511 / 339411, Installed New 2011
TECHNI 5'X 10' WATERJET
2007
2011
4000WATT
2AVAIL.
4AXIS
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 26TH FROM 8:00 A.M. - 4:00 P.M. EDT
4
VERTICAL MILLING MACHINEJET Vertical Milling Machine Model JVM-836-1 with 8” x 36” T-Slotted Table, 1-1/2” HP, Table & Knee Feed, Coolant, 1550 RPM, sn:12021871, mfg.2011
MANUAL LATHEJET Model GHB-1340A Tool Room Lathe with 13” Swing x 40”CC, 6” 3-Jaw Chuck, Tailstock, Toolpost, 70-1250 RPM, Inch/Metric Thread, 1-5/8” Bore, Chip Guard, 3-PT Steady Rest, sn:11112754A, mfg.2011
HYDRAULIC SHEARPEARSON 10ga x 12’ Hydraulic Shear with Backgauge, Finger Guard, Counter, (4) 36” Sheet Supports, Work Light, sn:5462/4
RADIAL DRILLSSUMMIT 6’H Heavy Duty Radial Drill with 6’ Arm x 16” Column, Slotted L-Base, sn:10159
31” L x 25” W x 20” H Box Table for Radial Drill
PLATE ROLLSROUNDO 10’ x 1/2” Plate Roll Bending Machine Model AB PS255 with Hydraulic Drop End, Drop Catch, Machine # 904812, sn:AB904813, mfg.1990
WDM 10ga x 36” Initial Pinch Sheet Metal Roll Model B-4-36 with (3) Rolls, Foot Control, sn:61137-11, mfg.2011
JET 16ga x 50” Slip Roll Model SRS-50 with 3” Roll Diameter, 1.5” Minimum Radius, sn:02249203
FARO ARMFARO-ARM Model Edge with Wifi, CAM2-Measure 10 Software, Probe, Dell Computer, Black Granite Plate, Mobile Cabinet, Low Hours, Only Used on One Project, sn:E09-05-13-10817, mfg.2013
BRIDGE CRANES, FABRICATION & MACHINING
JET VERTICAL MILLING MACHINE
JET GHB-1340A TOOL ROOM LATHE
PEARSON 10GA X 12' HYDRAULIC SHEARROUNDO 10' X 1/2" PLATE ROLL BENDING MACHINE
WDM 10GA X 36" INITIAL PINCH SHEET METAL ROLL
FARO-ARM WITH WI-FI
2011
2011 2011
2013
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.
1990
AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 27TH 10:00 A.M. EDT
5
PIRANHA II P1188 88 TON IRON WORKER
HYD-MECH S-20 MITRE CUTTING HORIZONTAL BANDSAW
IRONWORKERPIRANHA II Model P1188 88 Ton Iron Worker with Tooling & Rack, sn:P1188059, mfg.1988
BANDSAWSHYD-MECH Model S-20 Mitre Cutting Horizontal Bandsaw with 13” x 18” Capacity, 1” Blade, sn:20491843
DO-ALL Model 2013-V Vertical Bandsaw with 24” x 24” Table Capacity, Speed Indicator 5200, sn:439-83131
SHOPSMITH Model 505641 11” Bench Type Vertical Bandsaw, sn:89280
TRENNJAEGER Model VC260 Heavy Duty Chop Saw, sn:HD2021
METAL NOTCHERBOSCHERT Model PN4 Hydraulic Metal Notcher with 1/4” Capacity, Sheet Catcher, Foot Control, sn:452
LOAD TESTERDILLON DYNAMOMETER Load Tester with 18,000lb Capacity
ANVER SHEET LIFTERSANVER Model VPF-3 Vac Pack with Sheet Lifter 5,000lb Capacity, sn:996918
ANVER Model VLS-08 Vac Pack with Sheet Lifter 2,000lb Capacity, sn:0120012080
(2) ANVER Model VLS-07 Mechanical Vacuum Lifters with 1000lb Capacity, sn:50070014399
BLAST CABINETCENTRAL Pneumatic Steel Blaster Cabinet, Floor Model, sn:39170
THREADING MACHINERIDGID 535 Threading Machine with Dies & Tooling, Portable, Foot Control, sn:396927
PACKING MACHINEPRO-TECH ENGINEERING Model Orca III Packing Machine with Laminator Roll Controls, sn:06301991799
ANVER SHEET / VACUUM LIFTERS
4AVAIL.
Download a lot book at www.asset-sales.com
PRO-TECH ENGINEERING ORCA III PACKING MACHINE
MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 26TH FROM 8:00 A.M. - 4:00 P.M. EDT
6
ROUTERMULTICAM Router Model MG Series with Approx. 7’ x 22’ Capacity, sn:MG30843136
BRIDGE CRANESMID-ATLANTIC 5 Ton Top Running Overhead Bridge Crane with 80’ Span x 100’ Runway
MID-ATLANTIC 5 Ton Top Running Overhead Bridge Crane with 60’ Span x 100’ Runway
AIR COMPRESSORS & AIR DRYERS
(3) SPEEDAIRE 3 in 1 Air Dryers
SULLAIR Screw Type Air Compressors & Dryers
WELDINGMILLER Syncrowave 250DX Welder with Constant Coolant AC/DC Squarewave Power Source, sn:LL057496
(2) MILLER Millermatic 350P Welders, sn:LH460170B ● sn:MC270027N
(2) MILLER Syncrowave 350LX Welders with Constant Coolant AC/DC Squarewave Power Source, sn:KK281124 ● sn:KK314281
CUTLASS Model Clipper S Stand Welder, sn:070134
MILLER Dynasty 200 Suitcase Welder, sn:MA470268L
HYPERTHERM Powermax 380 Plasma Welder, sn:380-020493
UNI-NOR Model NL-130, sn:045581
THERMAL DYNAMICS Model PAK6XR Plasma Cutting System
FLATBED TRUCKINTERNATIONAL S1900 Approx. 30’ Steel Flatbed Truck with Manual Transmission, Dual Back Tires, VIN#1HTLOTVN9HHA12707, mfg.1980
FORKLIFTS & MAN LIFTTOYOTA 7100lb Capacity Forklift Model 0425FD35 with Side Shift, Dual Pneumatic Front Tires, Diesel, sn:21038
TOYOTA 3000lb Capacity Forklift Model 6010 with Side Shift, Gas Powered, Pneumatic Tires, sn:42-5FG18-10885
CLARK Forklift with Dual Pneumatic Front Tires, Side Shift, Gas Powered
DOOSAN Forklift with Pneumatic Tires, Gas Powered
CLARK Forklift, parts
YALE 7750lb Capacity Forklift Model GP080LJNGBE101 with Pneumatic Tires, Gas Powered, sn:LB13V02950A
WEBER 700lb Capacity Man Lift Model 1933 with Controls, sn:1933271299
MULTICAM WOOD ROUTER MG SERIES
ASSORTED WELDERS
INTERNATIONAL S1900 STEEL FLATBED TRUCK
TOYOTA FORKLIFTS
YALE 7750LB CAP. FORKLIFT
(2) MID-ATLANTIC 5 TON TOP RUNNING FREE STANDING BRIDGE CRANES
2AVAIL.
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License • Business Card • Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying via Company Check
AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 27TH 10:00 A.M. EDT
7
MISCELLANEOUSPower Tools ● Box Fans ● Vises ● Ladders ● Metal Carts ● Hand Carts ● Nuts & Bolts ● Heavy Duty Shelving ● Racks ● Pedestal Fans ● Hypertherm Powermax 380 ● Coke Machine ● Refrigerators ● Freezer ● Ice Making Machine ● Oven ● Microwaves ● Snack Machines ● Diamond Plate Boxes for Trucks ● Generators ● Heavy Duty Scrap Metal ● Hoppers ● VIDMAR Cabinet ● Heavy Duty Welding Tables ● Cabinets ● 4’ x 8’ Lift Portable Lift Table ● Wire Strapping Units ● Welding Helmets ● KNAACK Storage Cabinets ● Welding Screens ● Inspection Tooling ● Hose Reels ● C-Clamps ● Cable ● Wire ● Electrical Boxes ● Fire Proof Cabinets ● Paint Guns ● Belt / Disc Sanders ● Clamping Kits ● Socket Sets ● Heat Treat Oven ● Drill Press ● Transformers ● Paint Guns ● Storage Trailer ● Welding Supplies ● Heaters ● Office Supplies ● Rigging Chain & Heavy Duty Straps & Rack ● Etc…
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!
Turn
ing Your Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – South Carolina License #AUC.3113 & AF.3421
REAL ESTATE TO BE AUCTIONED AT 12:00 NOONAPPROX. 45,638 SQ. FT. ENCLOSED SPACE IN 2 MAIN BUILDINGS
APPROX. 6000 SQ. FT. STORAGENATURAL GAS
FRONT OFFICES HAVE HEAT AND AIR(2) 400A SERVICES IN FRONT BUILDING
800A SERVICE IN BACK BUILDINGZONED M1
CONTACT ASSET SALES, INC. FOR MORE INFORMATION(888) 800-4442
DIRECTIONSFROM I-77 SOUTH: Take I-77 South from Charlotte/Rock Hill. Stay of I-77 South until exit 6 for South Carolina 768 / Shop Rd. Turn left onto SC-768E/Shop Road (signs for S.C. 768E)continue about 1.6 miles. Turn right onto Pineview Drive. Turn left onto SC-48E / Bluff Rd. continue for 2.4 miles. Plant will be on the left. Follow the Auction Signs. HOTELSHOLIDAY INN EXPRESS COLUMBIA 7329 Garners Ferry Rd - Columia, SC 29209 (803) 695-1111HAMPTON INN COLUMBIA 201 E. Exchange Blvd. - Columbia, SC 29209 (803) 217-3999
UPCOMING AUCTIONSTHURSDAY, NOVEMBER 5th - Pitney BowesLate Model CNC Machining & FabricatingOnsite / OnlineClearwater, FL
PUBLIC AUCTIONPLANT CLOSED
CURTIS FABRICATIONMajor Trumpf CNC Laser, Press Brake & Fabricating
Columbia, SCTUESDAY, OCTOBER 27TH
@ 10:00 A.M. EDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
Recommended