View
231
Download
0
Category
Preview:
Citation preview
7/28/2019 T30 u GAGE
1/16
U-GAGE ULTRASONICS e n s o r s
U-GAGE ULTRASONICS e n s o r s
http://www.bannerengineering.com/literature_resources/mailform?1133727/28/2019 T30 u GAGE
2/162
Banner U- GAGE u l t r a s o ni c s e n s o r s s o l v e d i f f i c u lt a p p li c a t i on s i n y o u r p l an t .Banner U- GAGE u l t r a s o ni c s e n s o r s s o l v e d i f f i c u lt a p p li c a t i on s i n y o u r p l an t .
Ul t r ason ic sensor s tha t th ink as w e l l as
they hear.
Banner has reinvented ultrasonic sensing to be
infinitely more accurate, versatile and effective in
solving som e of the nastiest app lications you face.
We have applied our industry-leading photoelectric
sensor technologies to a new line of advanced
ultrasonic se nsor s. If youve ne ver tried ultraso nic
sensor s, or if youve tried the m unsu ccessfully before,
try them again. Youll find our U-GAGE sensors to be
the most advanced and capable ultrasonics ever.
))))))))))))))))))))))))))))))))))))))
MIN range MAX rangeSensing Window
S uper i or measu remen t accur acy w i t hmic rop r ocesso r con t r o l.
U-GAGE sensors offer incredible accuracy with
resolutions from 0.1% to 0 .25% of the sensing
dis tance to solve tough m easuremen t
applications never before po ssible. Our
sophis tica ted microp rocessor co ntro l
and pr oprie tary firmware ensur es
consis tent sensing performance in a
wide variety of applications.
So ver sat i le, a s ingle sensor cansolve t housands of appl icat ions.
U-GAGE technology allows you to set
an inf in i te numb er of ranges and
sensing windows with a s ingle sensor
by simply pushing a button. Now you
can inventory one o r two sensor s that
replace l i tera l ly hund reds of o lder-
s tyle , fixed-range sensors . You can a lso choose from num erou s housing
styles that fit your application and preference. Models are available with
mu ltip le outputs , including some that offer bo th analog and discre teoutputs in the same sensor!
S ur v i ves t he env i r onmen t and your mos tdi f f icul t sensing appl icat ions.
Banner U-GAGE sensor s are leakpro of and de signed
to withstand extremely hostile environments including
outdoo r u se , with r a t ings up to IP67 and NEMA 6P.
They are a lso inheren tly imm une to target color
differen ces and high-power l ight in terference even
sun light wont affect
th e ir p e r fo rman ce .
They are immume to
all light r eflections,
making them perfect
for problematic
clear-materia l
sensing app lications.
Near Limit Far Limit
Custom Sensing Window
7/28/2019 T30 u GAGE
3/163
U-GAGE : T he i n d us t r y s m o s t a d v a n c ed u l t r a s o n ic s e n s i ng f e a tu r e s .U-GAGE : Th e i nd u s t r y s m o s t a d v an c e d u lt r a s o n ic s e n s i ng f e a tur e s .
Use an ul t r asonic sensor w henyour appl i cat ion r equi r es :
Prec ise use r-defined sens ing windows.
Re liable backgroun d suppr ess ion proximi ty
sensing.
Positive clear-object detection.
High accur acy in we t or d i r ty environm ents .
Liquid leve l measurem ent .
Immu ni ty to surface color chan ges .
Accur ate detection o f highly reflective targets.
Reliable opera tion in high glare or sunlight.
Use an opt ical sensing methodi f your appl i cat ion r equi r es :
A visible sensing spot on the tar get.
Opera t ion in a windy envi ronmen t .
Opera t ion in high tempera ture gradients .
Sensing through a s ight glass as in a vacuum
envi ronment .
Small spot or target size detection.
Sensing of an angled surface .
Fast , sub-mi ll isecond r esponse t ime .
Accur ate detection of low-den sity mater ials.
A new innovat ion inprogramming versa t i l i t yand ease-of-use.
Now setting an infiniten u mb er o f s en s in g ran g es
and windows is s imple!
With a push button r ight on
th e sen so r h o u s in g o r th e
turn o f a screw, Banner
ultrasonic sensors offer selectable negative or
positive slope for analog sensing. Users can
also choose from a variety of options for
ON/OFF or High/ Low level contr ol. A rem ote
program ming option is available that can a lso
be used to d isable the push buttons to preventunwanted tampering.
Wide choice of r anges and uniquer e t r osonic mode.
Available in models with sensing ranges
fro m 3 0 m m to 8 m an d sen s in g re so lu tio n
from 0.1% to 0 .25% of the to ta l sensing
dis tance, their sophis t ica ted microprocessor
design ensures consis tent performance
across the entire sensing range, even with
changing ambient con dit ions. Many models
feature a re troso nic mo de: the sensor is taught a d is tinct point with in i ts sensing range and
will detect any object r egardless of shap e, s ize or ref lec tive an gle that crosses between the
sensor face and the taught point .
Temper atur e compensat ion.
Because the speed of sound c hanges 1 .8% per 10 C,
man y Banner u l trasonic sensor mod els feature specia l
tempera ture co mpen sation c ircuitry to s tabilize
window limit t r ip p oints for applicat ions where the
ambient operating temperatures will vary.
Visit www.bannerengineering.com for a complete listing of
available optical sensing solutions.
7/28/2019 T30 u GAGE
4/164
Banner g i v es y ou t he w i des t s e l ec t i on o f u l t r as oni c mode l s and f eatu
)))))))))))))))))))))))))))))))))))))))))))))))))))))))))
200 mm 8 mMIN M AX
)))))))))))))))))))
150 mm 1 mM IN MAX
)))))))))))))))))))))))))))
100 mm 1.4 mMIN M AX
))))))))))))))))))))))))))))))))))))))
300 mm 2 mMIN MAX
)))))) 300 mm1 m s Response
))))))))))) 600 mm2 m s Response
))))))
))))))
30 mm M IN
300 mm MA X
50 mm M IN
250 mm M AX
QT50ULong-RangeProgrammable
75 kHz
S18UCompac t 18 m mThreaded Bar re l
300 k Hz
T30UCompac t 30 m mThreaded Bar re l
Short Range:
228 k HzLong Range:
128 k Hz
Q45UMedium-RangeProgrammable
Short Range:
230 k HzLong Range:
128 k Hz
Q45URShort -RangeRemote Head
400 k Hz
T18UMedium-Range
Opposed
230 k Hz
Dual
Discrete
Analog
Discrete
Analog
DualDiscrete
Discreteand
Analog
Discrete
Analog
Discrete
Analog
)))))
Output Conf ig
250 mm 3 mMIN MAX
)))))))))))))))))))))))))))))))))))))))))))))))))))))))))
M odel Hous ing Range
Custom Sensing Window(s)
Custom Sensing Window
Custom Sensing Windows
Custom Sensing Windows
Custom Sensing Window
Custom Sensing Window
Custom Sensing Window
Bo
Bo
0 to
4 to
Bipolar-
0 to
4 to
Bo
Bo
NP0 to
4 to
Bipolar-N
0 to
4 to
Bipolar-N
0 to
4 to
1Selectable via dip switch. 2Selectable via wiring. 3By model. 4Icons represent fastest response time for product.
Compleme
NPN or P
(1 N.O. 1 N
7/28/2019 T30 u GAGE
5/165
10 to 30V dc
10 to 30V dc
12 to 24V
15 to 24V dc
12 to 24V dc
15 to 24V dc
12 to 24V dc
15 to 24V dc
12 to 30V dc
Yes
Yes
Yes
Yes
Yes
Yes
Yes1
N/A
No
Yes3
N/A
Yes1
N/A
No
No
Yes
Yes
Yes
Yes
Yes
No
110112
70137
108964
110738
59200
57438
Short-Range:
44177Long-Range:
48454
Short-Range:
47818Long-Range:
48456
59321
59323
40124
Data SheetRefer ence
LED SignalS t r eng thIndication
TEACHP r o g r a m -
ming
High/LowLimit
Contr o l
Ratings &Oper at ingCondit ions
Temper a tu r eCompensation
& Ef fec tResponse Time 4
AnalogLinear i ty
Yes1
Uncompensated: 0.2%
of sensing distance/C
Compensated: 0.02%
of sensing distance/C
Yes0.02% of sensing
distance/C
No0.2% of sensing
distance/C
Yes3
Uncompensated: 0.2%
of sensing distance/C
Compensated: 0.05%
of sensing distance/C
Yes0.05% of sensing
distance/C
N/A
IP67, NEMA 6P-20 to +70C
IP67, NEMA 6P-20 to +60C
IP67, NEMA 6P-20 to +70C
IP67, NEMA 6P-25 to +70C
Controller:IP67, NEMA 6P
Sensor:IP65, NEMA 4-25 to +70C
IP67, NEMA 6P-40 to +70C
N/A
0.2%of full scale
N/A
Slow:+_0.5 mm
Fast:+_1.0 mm
N/A
0.5%of full scale
N/A
1.0%of full scale
N/A
1.0%of full scale
N/A
SupplyVoltage
100, 400, 800
or 1,600 ms1
100, 500, 1100
or 2,300 ms1
5 ms
2.5 or 30 ms2
40 or 160 ms1
10 to 320 ms1
1 ms or 2 ms2
ort-Range:
48 ms
ort-Range:
48 ms
Range: 20, 40,or 640 ms1
ort-Range:
to 1,280 ms
Long-Range:
96 ms
Long-Range:
96 ms
Long-Range: 40, 80,320, or 1,280 ms1
Long-Range:
80 to 2,560 ms
http://www.bannerengineering.com/pdflink.php?page=5&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=C&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=D&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=E&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=F&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=G&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=G&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=H&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=H&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=I&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=I&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=J&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=J&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=K&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=L&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=M&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=M&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=L&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=K&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=J&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=I&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=H&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=G&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=F&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=E&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=D&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=C&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=5&link=A&part=1133727/28/2019 T30 u GAGE
6/16
U-GAGE QT5 0 U: A v e r s a t i l e , p r o g r a m m a b le s e ns o r w i t h a l o ng 8 m e te r r a n ge .U-GAGE QT5 0 U: A v e r s a t i l e, p r o g r a m m a b le s e ns o r w i t h a l o ng 8 m e te r r a n ge .
6
QT50U Model Selection
* 9 m (30') cables are available by adding suffix w/30 to the model number of a cabled sensor (e.g., QT5OUDB w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable, see page 15 for a partial listing of available cables.
200 mm to 8 m
(8" to 26')
200 mm to 8 m
(8" to 26')
5-wire, 2 m (6.5') cable*
5-pin Mini-style QD**
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Mini-style QD**
5-pin Euro-style QD**
10 to 30V dc
10 to 30V dc
Long r ange, small dead zone.
QT50U Series u l trasonic sensors feature an extended sensing range o f up
to 8 m . I ts 200 mm minimum sensing d is tance is the industrys shortest
for a long-range u ltrasonic prod uct .
Micr opr ocessor TEACH.
Advanced m icropr ocessor TEACH-mode pro gramm ing s implifies se tup
and offers added application flexibility. Configuration is easy via two push
buttons located on the sensor or thr ough a r emo te TEACH wire , which
can a lso be used to d isable the push buttons to prevent unwanted
tamper ing. An 8-pin DIP switch located on the b ack o f the un it enables a
temperature compensation feature , providing the h ighest accuracy across
a wide varie ty of temp erature varia t ions.
Retr osonic mode.Reduce inh erent u l trasonic dead zone to zero by se lecting the QT50Us
retroso nic mod e. The sensor is taught a d is tinct point and will detect any
object regard less of shape, s ize or r ef lec t ive an gle that passes between
the sensor face and the taught point .
Independent ly adjustable sensing w indow s for near and far l imits.
The QT50U discrete model offers extraordinary versatility with two
independ ent near and far l imits per o utput , making i t well su ited for
applicat ions where h igh and low m edia level monitoring is required .
Analog mo dels feature Banner s scaleable ana log output . With ma ny
possib le configurations, just one analog or d iscre te model can replace
vir tually hund reds of sensors .
Unique housing constr uct ion.
With the QT50U, a l l smarts are on b oard and a ccessib le forconfiguration e i ther from beneath a sealed cap on the back of the
unit or via the exposed push buttons and display. The fu lly
encapsu la ted housing offers a r ugged, leakproo f u l trasonic sensing
solution for app licat ions involving l iquid detection or washdown.
Dual NPN or PNP
Selectable
0 to 10V dc
or
4 to 20 mASelectable
M ode ls R ange Ca bl e Suppl y Vol ta ge Output Type sAC sensing solutions on page 11
QT50UDB
QT50UDBQ
QT50UDBQ6
QT50ULB
QT50ULBQ
QT50ULBQ6
Analog OutputDiscrete Outputs
7/28/2019 T30 u GAGE
7/16
U-GAGE S1 8 U: A c o m p a c t ul t r a s o n ic s e n s o r w i t h pu s h - b u t t o n p r o g r a m m i n g.U-GAGE S 1 8 U: A c o m p a c t u lt r a s o n ic s e n s o r w i t h pu s h - b u t t on p r o g r a m m i n g.
7
S t r a igh t o r r i ght -ang le emi t t e r hous ings .
The S18U Series features an industry-s tandard
18 m m thread ed bar re l design and is available in a
straight or r ight-angle hou sing, offering the h ighest
flexibility for application integration. Wide ranges of
mou nting options are available.
S18U M odel Select ion
* 9 m (30') cables are available by adding suffix w/30 to the model number of a cabled sensor (e.g., S18UBA w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable, see page 15 for a partial listing of available cables.
S18UBA
S18UBAQ
S18UBAR
S18UBARQ
S18UUA
S18UUAQ
S18UIA
S18UIAQ
S18UUAR
S18UUARQ
S18UIAR
S18UIARQ
30 mm to 300 mm
(1.2" to 11.8")
30 mm to 300 mm(1.2" to 11.8")
30 mm to 300 mm
(1.2" to 11.8")
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
5-wire, 2 m (6.5') cable*
5-pin Euro-style QD**
10 to 30V dc
10 to 30V dc
10 to 30V dc
Bipolar
NPN and PNP
0 to 10V dc
4 to 20 mA
0 to 10V dc
4 to 20 mA
Straight
Right-Angle
Straight
Right-Angle
Mode ls Range Cable Supply Voltage Output Housing Configuration
Analog OutputDiscrete Output
A high-accur acy, c lose-r ange solut ion.
Offering h ighly accurate object detection from 30 m m to 300 mm ,
the S18U reliably detects opaque or translucent objects, is not
affected by color and offers programmable background suppression.
Micr opr ocessor TEACH-mode pr ogr amming.
The S18Us microprocessor-
based design eliminates the
need for p otentiometer
adjustments . Program ming is
simplified with a TEACH-mode
push button located directly on
the sensor housing or via a
remote TEACH wire that also
may be used to d isable the push
button to prevent unwanted
tampering. Bright LEDs display
sta tus during se tup and operat ion .
A buil t-in temper ature co mp ensation feature on a l l units a l lows
the sensor to se lf-corr ect for i ts environm ent and m ainta in the
highest sensing accuracy in chan ging condit ions.
TEACH/OutputIndicator
Power/SignalStrength
TEACH Push Button
StHous
Right-AngleHousing Style
7/28/2019 T30 u GAGE
8/16
U-GAGE T3 0 U: Th e s m a ll e s t , m o s t v e r s a t i l e 3 0 m m b a r r e l ul t r a s o ni c s e n s o r.U-GAGE T3 0 U: Th e s m al l es t , m o s t v e r s a t il e 3 0 m m b ar r e l ul t r a s on ic s e n s o r.
8
T30U M odel Select ion
* 9 m (30') cables are available by adding suffix w/30 to the model number of a cabled sensor (e.g., T30UDNA w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable, see page 15 for a partial listing of available cables.
Analog & d iscr e te ou tpu ts in the same sensor .
The T30U sets new standar ds for u l trasonic sensor
versatility by including both discrete and analog outputs
in the same unit. Choose a model with either an NPN or
a PNP discre te output , p lus a 0 to 10 V dc or 4 to 20 mA
sour cing analog output in the sam e sensor . Now you
can perform both measurement and on-off switching
simultaneously with a s ingle sensor . And bo th output windows
can be p rogram med simultaneously or independ ently, with
either a p osit ive or negative analog o utput s lope.
Push-butt on TEACH-mode pr ogr amming is fast er, easierand mo r e secur e .
The T30U allows you to s imply push b uttons to se t accur ate ,
custom-sized sensing windows an d place them anywhere with in a
1 5 0 mm -to -1 m o r 3 0 0 m m-to -2 m ran g e .
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
2 m (6.5')*
5-pin Euro-style QD**
12 to 24V dc
12 to 24V dc
12 to 24V dc
15 to 24V dc
12 to 24V dc
15 to 24V dc
Dual NPN
Dual PNP
Dual NPN
Dual PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
M odels Range Cable Supply Voltage Discrete Output Analog Output
T30UDNA
T30UDNAQ
T30UDPA
T30UDPAQ
T30UDNBT30UDNBQ
T30UDPB
T30UDPBQ
T30UINA
T30UINAQ
T30UIPA
T30UIPAQ
T30UUNA
T30UUNAQ
T30UUPA
T30UUPAQT30UINB
T30UINBQ
T30UIPB
T30UIPBQ
T30UUNB
T30UUNBQ
T30UUPB
T30UUPBQ
150 mm to 1 m
(5.9" to 39")
300 mm to 2 m
(11.8" to 79")
150 mm to 1 m
(5.9" to 39")
150 mm to 1 m
(5.9" to 39")
300 mm to 2 m
(11.8" to 79")
300 mm to 2 m
(11.8" to 79")
Analog and Discrete OutputDual Discrete Outputs
None
None
4 to 20 mA
0 to 10V dc
4 to 20 mA
0 to 10V dc
7/28/2019 T30 u GAGE
9/16
U-GAGE Q45U: Push -bu t ton pr og r amming for ve r sa t i l i t y and ease o f use .U-GAGE Q45U: Push -bu t ton pr og r amming for ve r sa t i l i t y and ease o f use .
9
Simply push one button to set up operating window
limits from 100 m m to 1 .4 m . Microp rocessor-contro lled ,
TEACH-mo de limits are set by simply placing the tar get at
one o f the de sired l imits and c l icking the push b utton ,
then p lacing the target a t the second l imit and
clicking again.
Selectable r esponse modes and t imes.
Q45U Sensors with d iscre te output are
program mable for e i ther ON/OFF presence
detection or HIGH/LOW level contro l. ON/OFF
control m ode energizes the solid-s ta te ,
norm ally-open ( NO) or n orm ally-c losed (NC)
output when a target is detected within the
sensing window or when the target is outs ide
the sensing window. HIGH/LOW mode energizes
the output when the f irs t window limit is reach ed, and the output s tays
energized unti l the target reaches the second window limit, m eeting the logic
needs for fill-level, web tensioning control and similar applications. Response
time is a lso programmable from 20 ms to 2 .56 seconds, depending on
mod el, u ti lizing DIP switches ( d iscre te models) or a potentiometer ( analog
mod els) located ben eath the sensors h inged, sealed polycarbo nate cover.
Q45U Model Selection
Super io r d iagnost ics .
Three LEDs continuously display
programming and operat ing s ta tus by
indicating POWER ON, OUTPUT OPERATING,
and SIGNAL STRENGTH. A five-segment LED bar
graph also indicates the relative position of the target within
the sensing window.
FARL IM
IT
Pu sh t
h e B ut
t o n
2 m (6.5')*
5-pin Mini-style QD**
5-pin Euro-style QD**
2 m (6.5')*
5-pin Mini-style QD**
5-pin Euro-style QD**
2 m (6.5')*5-pin Mini-style QD**
5-pin Euro-style QD**
2 m (6.5')*
5-pin Mini-style QD**
5-pin Euro-style QD**
2 m (6.5')*
5-pin Mini-style QD**
5-pin Euro-style QD**
12 to 24V dc
12 to 24V dc
12 to 24V dc
15 to 24V dc
15 to 24V dc
No
Yes
Yes
Yes
Yes
Models Range Temperature Cable Supply Voltage Output TypeCompensation
Q45UBB63DA
Q45UBB63DAQ
Q45UBB63DAQ6
Q45UBB63DAC
Q45UBB63DACQ
Q45UBB63DAQ6
Q45UBB63BCQ45UBB63BCQ
Q45UBB63BCQ6
Q45ULIU64ACR
Q45ULIU64ACRQ
Q45ULIU64ACRQ6
Q45ULIU64BCR
Q45ULIU64BCRQ
Q45ULIU64BCRQ6
100 mm to 1.4 m
4" to 55"
100 mm to 1.4 m4" to 55"
250 mm to 3 m
9.8" to 118"
100 mm to 1.4 m4" to 55"
250 mm to 3 m
9.8" to 118"
Bipolar
NPN and PNP
0 to 10V dcor
4 to 20 mA
(Selectable)
U pt o
3 m
N EARL I
M IT
Pu sh t
h e B ut
t o n
* 9 m (30') cables are available by adding suffix w/30 to the model number of a cabled sensor (e.g., Q45UBB63DA w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable, see page 15 for a partial listing of available cables.
Analog OutputDiscrete Output
7/28/2019 T30 u GAGE
10/16
U-GAGE Q45UR: U l t ra -accu ra te gaug ing i n compac t remo te sens ing packages .U-GAGE Q45UR: U l t ra -accu ra te gaug ing i n compac t remo te sens ing packages .
10
Pr ec ise d iscr e te or ana log sens ing fo r har d- to -access anddif f icul t appl icat ions.
With all the advanced features of the standard Q45U, the Q45UR adds
the convenience of a choice of three rem ote sensing heads to access
applications with limited space or difficult environments. High-precision
discre te output mode ls can resolve object presence with in 0 .6 mm at
any point from 50 m m to 2 50 m m with exceptional sensing repeatabil ity:
0.2% of the sensing d is tance se t point . Analog mod els feature 0 .1 m m
to 0 .5 mm re so lu tio n , w ith a sen s in g ran g e o f 5 0 mm to 2 5 0 m m.
Discre te output m odels ar e Bipolar , NPN and PNP, and analog outpu t
mo dels are se lectable for 0 to 10V dc or 4 to 20 m A output .
Set your ow n custom sensing w indow s w ith the push of a button.
With Banners push-bu tton program ming, you can se t your own customsensing windows. On d iscre te output mo dels , you c an se t an automatic
sensing window s ize of 1 , 2 , 3 , or 4 m m with DIP switches. The
sensing d is tance se tpoint , programmed using the push button , becomes
the center point of the window. Both d iscre te and analog Q45UR
sensor s a lso a l low users to de fine a custom sensing window r anging
fro m 5 mm to 2 0 0 mm an d b o th mo d e ls h ave se lectab le r e sp o n se
mo des and speeds. The analog output can b e se t to a posit ive or
negative s lope an d ou tput respon se speed is se t using the s ingle- turn
p o ten t io me te r ( an a lo g mo d e ls ) o r DIP swi tch ( d i sc re te mo d e ls ) .
Advanced diagnost ics andtemper a tur e compensat ion.
Three LEDs continuo usly display
programming and operat ing
status. The red LED flashes in
direct proportion to the received
signal strength, to assist in
alignment. A yellow LED
indicates the target is in the
oper ating window limits andOUTPUTS CONDUCTING.
All mode ls also feature a h ighly
visible, 5-segment, m oving-dot
red LED, which indicates the
relative position of the target within the sensing window. Thermistors in
the remote sensing heads compensate for temperature varia t ions,
assuring super ior accur acy a t the sensing point .
18 mm ba r r e ls , o r compac tcubical sensing heads.
The rugged remote sensor heads are available in either a stainless
steel or plastic 18 mm diameter threaded barre l housing, or an
ultra-comp act, Flat-Pak plastic model. They all feature a tough
ceram ic transduc er, and ar e ra ted IEC IP65 an d NEMA 4. They have a
wid e o p e ra tin g temp era tu re r an ge : -2 5 to + 7 0 C ( -1 3 to +1 5 8 F) .
Models Cable Sensor Head
Q45UR Model SelectionInc ludes one con t ro l le r and one sensor head .
* 9 m (30') cables are available by adding suffix w/30 to the model number
of a cabled sensor (e.g., Q45UR3BA63CK w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable,
see page 15 for a partial listing of available cables.
Q45UR3BA63CK
Q45UR3BA63CQK
Q45UR3BA63CQ6K
Q45UR3BA63CKS
Q45UR3BA63CQKS
Q45UR3BA63CQ6KS
Q45UR3BA63CKQ
Q45UR3BA63CQKQ
Q45UR3BA63CQ6KQ
Q45UR3LIU64CK
Q45UR3LIU64CQK
Q45UR3LIU64CQ6K
Q45UR3LIU64CKS
Q45UR3LIU64CQKS
Q45UR3LIU64CQ6KS
Q45UR3LIU64CKQ
Q45UR3LIU64CQKQ
Q45UR3LIU64CQ6KQ
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
Analog Output
Discrete Output
18 mmStainless Steel
Barrel
18 mm PlasticBarrel
Flat-PakPlasticCubical
18 mmStainless Steel
Barrel
18 mm PlasticBarrel
Flat-PakPlasticCubical
7/28/2019 T30 u GAGE
11/16
U-GAGE T18U: U l t ima te re l i ab i l i t y i n dua l range , opposed u l t rason i c senso rs .U-GAGE T18U: U l t ima te re l i ab i l i t y i n dua l range , opposed u l t rason i c senso rs .
11
Dual r anges and r esponse t imes.
Choice of two ranges and two response times in the same units for the ultimate in versatility. Choose
a respo nse t ime of 2 ms and r ange of 600 mm for longer r anges or s imply reverse the polar i ty and
achieve ultra-fast response of 1 ms with a
range of 300 m m for h igh speed app licat ions
such as cou nting.
Sonic OMNI-BEAM : AC &DC piezoe lec t r ic sensor s .
This proven ultrason ic sensor
features an adjustable sensing
window and 10-elemen t LED
arr ay for easy se tup. Mod els
include switched output with ON/OFF and
HIGH/ LOW control mo des and analog.
Reliable sensing of c lear mater ia ls.
High frequen cy acoustic em itter an d tuned
receiver are ideal for sensing under br ight
lighting and for reliably detecting clear
materia ls such as g lass . They operate from
12 to 30V dc with cu rren t-s inking ( NPN)
o r cu r r en t - so u rc in g (PNP) co mp lemen ta ry
outputs to interface with a wide variety
of loads.
Popu lar pa ten ted hous ing .
T-style right-angle sensor package with
1 8 m m th read ed mo u n t in g b a r re l a l lo ws
mo re versat ile mou nting in less space,
measu re s o n ly 4 0 mm in d iame te r an d
3 0 m m d e e p .
Unique signal str ength indicator.
Advanced, built-in microprocessor analyzes
the signal and controls an indicator LED
which flashes in direct proportion to the
strength of the sen sors received signal.
Models
T186UE
T186UEQ
T18VN6UR
T18VN6URQ
T18VP6UR
T18VP6URQ
Type
Emitter
Receiver
Receiver
Cable
2 m (6.5 ft)*4-Pin Euro-style QD**
2 m (6.5 ft)*4-Pin Euro-style QD**
2 m (6.5 ft)*4-pin Euro-style QD**
SupplyVoltage
12 to 30V dc
OutputType
ComplementaryNPN
ComplementaryPNP
QT50U AC: Long-r angesensor .Available soon. Go to
b an n e ren g in ee r in g . co m/q t5 0 u
or contact fac tory for deta i ls .
ULTRA-BEAM : AC & DCsensor s tha t a r e lowon cost.
This cost-effective lon g-ran ge
( 0 .5 m to 6 m) u l t r a so n ic
sensing solution features a
rugged metal mesh-protected
electrosta t ic transducer and molded
PBT polyester housing.
T18U M odel Select ion
3 0 0 m m ( 1 2 " ) R a n g e
1 m s Re s p o n s e
6 0 0 m m ( 2 4 " ) R a n g e
2 m s Re s p o n s e
AC sens ing so lu t ions a lso av a i lab le . Go to bannereng inee r i ng .com f o r m o r e i nf o r m a ti on .AC sens ing s o lu t ions a ls o ava i lab le . Go to bannereng inee r i ng .com f o r m o r e i nf o r m a t io n.
* 9 m (30') cables are available by
adding suffix w/30 to the model
number of a cabled sensor (e.g.,
T186UE w/30).
** A model with a quick-disconnect
(QD) connector requires a mating
cable, see page 15 for a partial
listing of available cables.
Range
Normal Sensitivity:600 mm (24")
High Sensitivity:300 mm (12")
NOTE: Sensor pair requires one emitter and one receiver.
http://www.bannerengineering.com/pdflink.php?page=11&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=11&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=11&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=11&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=11&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=11&link=B&part=1133727/28/2019 T30 u GAGE
12/16
Banner U-GAGE u l t r a s o n ic s e n s o r a p pl i c a t i on s .Banner U- GAGE u l t r a s o n ic s e n s o r a p pl i c a t i on s .
12
MATERIALS HANDLING DETECTION
Product: QT50UObjective: To detect the pre sence or absence of a target that may includea non-perpendicular sensing surface.
Sensor Model : QT50U with d iscrete output.
Operat ion: In mater ials handling applications, the presence or absence of d iverse targets ( for example, pallets) must be sensed r eliably. The QT50Ucan re liably sense targets that do not pre sent a f lat, perpen dicular sensingsurface through its unique retrosonic sensing mode. When a pallet orpackage of any size or sha pe is in the sensing location , the sensor do es notsense the f loor an d turns its output ON.
LIQUID LEVEL MEASURING IN CLEAR CONTAINERSProduct: S18U
Objective: Measure liquid levels in clear co ntainers .
Sensor Models : S18UBAR right-angle a nd S18UIA straight bar rel se nsors.
Operat ion: The S18U is ideal for detecting clear objects and m easur ingliquid levels , regardless o f color or consistency. The uniqu e r ight-anglehousing allows easy fixturing to peer over the sides of a conveyor.
END EFFECTOR POSITION FEEDBACKProduct: S18U
Objective: To pr ovide pr oximity information to an assembly robot co ntro l.
Sensor Models : S18UIA straight-barrel sensor.
Operat ion: The lightweight u ltrasonic sensor communicates to the robotcontro ller , the d istance f rom the end effector to any object or sur face.
LOOP TENSION MONITORINGProduct: Q45U
Objective: To contro l web speed by monitor ing loop tension.
Sensor Model : Q45ULIU64ACR an alog se nsor.
Operation: The analog Q45U ultrasonic sensor uses dual microprocessorsto smooth output response to web movement. The sensor ignores invalido r e r r a t ic ech o es . Th e smo o th ed o u tp u t r ed u ces s t r es s o n mo to r s an dmotor dr ives.
7/28/2019 T30 u GAGE
13/1613
Banner U-GAGE u l t r a s o ni c s e n s o r a p pl i c a t i on s .Banner U- GAGE u l t r a s o ni c s e n s o r a p pl i c a t i on s .
OVERHEAD CRANE GUIDANCEProduct: T30U
Objective: The T30 sensor is programmed to s ignal the crane to s top whenthe cran e is at a preset d is tance f rom a load. Remote TEACH-moderespon se settings for the senso r are applied by a system contro ller .
Sensor Model : T30UDNB dual-d iscrete u ltrasonic sensor .
Operat ion: A T30U sensor m ounted a bove the conveyor m ay be used todetect small d if ference s in produ ct height.
U - GAGE
ANAL
OGP OW
ER
SIGNAL
OUT P U
T DI
SCRET E
U-GAGE A N A L O G
P O W E R
S I G N A L
O U TP U T D I S C R E T E
EMPTY COMB VERIFICATIONProduct: T18U
Objective: Verify that no har d d isks re main o n the "com b" fo llowing ther in s in g p r o ced u r e .
Sensor Model : T18U opposed u ltrasonic sensor pair .
Operation: Originally, the har d d isk substrates be ing r insed in the com brinsing machine were a luminum, an d it was easy to tell, using standardphotoelectr ic sensors, whether an y d isks rem ained in the rack fo llowing ther insing procedure. When c lear g lass substrates are used, however , anultrasonic opposed sensor pair can reliably sense whether any d isks remain .(Photoelectr ic clear object detection sensors are not recommended for th isapplication because o f the spray r inse.)
ROLL DIAM ETER M ONITORINGProduct: Q45UR and Flat-Pak Rem ote Sensor
Objective: To m onitor the pa yout of a ro ll of mater ial.
Sensor Model : Q13C2.0 remote u ltrason ic sensor an d Q45UR3LIU64Canalog contro ller.
Operat ion: The Flat-Pak remote u ltrasonic sensor and its contro ller worktogether to provide ro ll d iameter information to a p rocess co ntro ller . TheOPTO-TOUCHTM optical touch button is used to program remotely using theQ45UR co ntro llers TEACH input.
LIQUID LEVEL MONITORINGProduct: QT50U
Objective: To m onitor the level of l iquid in a tank .
Sensor Model : QT50U sensor with analog output.
Operat ion: The narro w beam of the QT50U allows the sensor to bemou nted at the top of a s torage tank without i ts beam rea ching the tank wall.As the liquid level changes, the sensor sends an ongoing signal that is scaledto represent the current depth of l iquid in the tank.
7/28/2019 T30 u GAGE
14/16
U-GAGE u l t r a s o n i c s e n s o r d i m e n s i o n s .U-GAGE u l t r a s o n i c s e n s o r d i m e n s i o n s .
14
Jam Nut(Supplied)
M30 x 1.5Thread
15 mm(0.59")
40.0 mm(1.57")
45.0 mm(1.77")
66.5 mm(2.62 in)
U-GAGE
ANALOG
POWER
SIGNALOUTPUT
DISCRETE
11.5 mm(0.45")
J am Nut(Supplied)
M18 x 1Thread
15 mm(0.59 in)
30.0 mm(1.18 in)
11.5 mm(0.45 in)
66.5 mm(2.62 in)
40.0 mm(1.57 in)
Green LEDPower Indicator
Yellow LEDSignal Strength Indicator
(Receiver, Only)
60.5 mm(2.38 in)
44.5 mm(1.75 in)
69.0 mm(2.72 in)
87.6 mm(3.45 in)
External ThreadM30 X 1.5
Mini-style QD Connector
30.0 mm(1.18 in)
7.1 mm(0.28 in)
4.5 mm (#10) ScrewClearance (2)
50.8 mm(2.00 in)
6.4 mm (0.25 in)
14 mm (0.6 in)
Transducer Centerline
Transparent Cover (Gasketed)View: Sensing Status
Output Load StatusPower
Open to Access:Push Button forProgramming of SensingWindow Limits
External ThreadM30 X 1.5
Mini-style QD Connector
Hex Nut Supplied
14 mm (0.6 in)
79.4 mm(3.13 in)
44.5 mm(1.75 in)
69.0 mm(2.72 in)
87.6 mm(3.45 in)
30.0 mm(1.18 in)
7.1 mm(0.28 in)
4.5 mm (#10) ScrewClearance (2)
50.3 mm(1.98 in)
6.4 mm (0.25 in)
Transducer Centerline
Transparent Cover (Gasketed)View: Sensing Status
Output Load StatusPower
Open to Access:Push Button forProgramming of SensingWindow Limits
67.4 mm
(2.66")
50.8 mm
(2.00")
4 x 4.4 mm
( 0.17")
38.1 mm
(1.50")
Internal thread 1/2 NPSM;
External thread M30 x 1.5
50.8 mm(2.00")
66.0 mm(2.60")
84.2 mm(3.32")
34.2 mm(1.35")
10.6 mm(0.42")
53.8 mm(2.12")
90.9 mm(3.58")
18.0 mm(0.71")
10.6 mm(0.42")
58.0 mm(2.29")
95.1 mm(3.75")
8.5 mm(0.33")
18.0 mm(0.71")
18.1 mm(0.71")
QT50U S18U
T30U
Q45 U/Q45 UR Cont r ollerQ4 5U Long Range Q45 UR Remot e Tr ansducer s
T18U
NOTE: Dimensions shown are for quick-disconnect models.For a more complete listing of available models and drawings go to www.bannerengineering.com/ugage
7/28/2019 T30 u GAGE
15/1615
Ba nn er u l tr a s on ic s e n s o r a c c es s o r i es .
Bracket Models, Descriptions and Photos
M ount ing Br ackets
SMB18A
18 mm mounting hole, 12-gauge, stainless steel bracketwith a curved mounting slot for versatility and orientation.
Clearance for M4 (#8) hardware.
SMB18SF
Threaded 18 mm split-clamp black PBT polyester bracket.
Stainless steel mounting hardware included.
SMB1815SF Swivel black PBT polyester bracket with set screws for
mounting the sensor by its cable hub.
Stainless steel mounting hardware included.
SMB30MM
30 mm mounting hole, 11-gauge, stainless steel bracketwith curved mounting slots for versatility and orientation.
Clearance for M6 (14") hardware.
SMB30SC
Threaded 30 mm swivel, black PBT polyester bracket.
Stainless steel mounting hardware included.
Style
5-Pin Mini-stylew/Shield
5-Pin Euro-stylew/Shield
4-Pin Euro-style
Model
MBCC2-506
MBCC2-512MBCC2-530
MQDEC2-506MQDEC2-515MQDEC2-530
MQDC-406MQDC-415MQDC-430
Length
2 m (6.5')
4 m (12')9 m (30')
2 m (6.5')5 m (12')9 m (30')
2 m (6.5')5 m (15')9 m (30')
Connector
Straight
Straight
Straight
Quick-Disconnect (QD) Cables Following is the selection of cables available for ultrasonic QD models.
NOTE: For a complete listing of available cables go towww.bannerengineering.com
S18U Q45UR Bar r el T18 U
T30U T18 U
QT50 U T30 U Q45U or Q4 5UR
For Use With
QT50U, Q45U, Q45UR Series
QT50U, S18U, T30U, Q45U, Q45UR Series
T18U
QT50 U T30 U Q45UR or Q45U
Ba nn er u lt r a s on ic s e n s o r a c c es s o r i es .
NOTE: For detailed dimension drawings of available brackets go towww.bannerengineering.com
S1 8U Q45 UR Bar r el T18 U
http://www.bannerengineering.com/pdflink.php?page=15&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=15&link=B&part=113372http://www.bannerengineering.com/pdflink.php?page=15&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=15&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=15&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=15&link=B&part=1133727/28/2019 T30 u GAGE
16/16
Banner Engineering Corp., 9714 10th Avenue North, Minneapolis, MN 55441 U.S.A.
Phone 763.544.3164 Fax 763.544.3213 bannerengineering.com email: sensors@bannerengineerin
1.888.3.SENSOR (1.888.373.6767)
http://www.bannerengineering.com/pdflink.php?page=16&link=A&part=113372http://www.bannerengineering.com/pdflink.php?page=16&link=A&part=113372Recommended