View
141
Download
7
Category
Tags:
Preview:
DESCRIPTION
Swing-Lo Scaffold and Access Catalog
Citation preview
ProductCatalog
INSPECTION • CONSTRUCTION • REPAIR • MAINTENANCE Swing-Lo Suspended Scaffold Company PO Box 128 Covert Michigan 49043
Designers, Engineers & Manufacturers of Special Overhead ScaffoldingCustomer Service (866) 764-8989 Office (269) 764-8989 FAX (269) 764-8897
www.swing-lo.com E-mail: info@swing-lo.com
THE SCAFFOLDING
SYSTEM THAT BEGINS RIGHT AT THE TOP
* BRIDGES * POWER PLANTS * RAILROADS * REFINERIES * AUDITORIUMS * CUSTOM DESIGN
SINCE 1955
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
●●
●●●●
VER21JAMEMBER
SCAFFOLDING DEVICES CLASSIFIED BYUNDERWRITERS LABORATORIES INC.
ONLY AS TO LOAD CAPACITY NO. 419M
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instrutions, and all Local, State, and Federal Safety Regulations.
2
Date______________________________________
Project____________________________________
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
TABLE OF CONTENTS
Our Heritage 4 Application Photographs 5-12 Permanent Suspended Scaffold Application 13 Bascule Bridge Scaffold 14 Rig Scaffold Systems 15
3Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
INTRODUCTION
MOBILE SUSPENDED SCAFFOLD SYSTEMS
Scissors CHD-140 & HD-801 Hangers 16 Winch Frame Hanger Scaffold 17 I-Beam Clamp, Truss, & Hanger 18 Prestressed Concrete I-Beam Clamp 19-20 By-Pass Scaffold System 21-23 Multi-Level Scaffold 24 Drop-Through Scaffold 25 Traveller Scaffold 25 Spreader Scaffold 25 Bottom Flange Steel Riding Scaffold 26 Top Flange Steel & Concrete Riding Scaffold 26 Suspended Stripping Scaffold 27 Between Girder Stripping Scaffold 28 Tank Scaffold 32 Girder-Edge Scaffold 50
Grid Scaffold (“Dance Floor”) 29 Beam Clamp & Truss Scaffold 30 Beam Clamp & Hanger Scaffold 30 Waler Beam Clamp Scaffold 31 Waler Fascia Beam Scaffold 31 Tank Scaffold 32 Pier Cap Scaffold 33 Pier I-Beam Scaffold 34 H-Beam Chord Scaffold 34 Box Chord Scaffold 35 Box Chord & Parapet Scaffold 35 Box Chord Single, Double, and Center Sides 36 Box Chord Cantilever Scaffold 36 I-Beam Saddle Scaffold 37 Single-Side I-Beam Scaffold 37 Elevated Rail Scaffold 37 H-Beam Pile Scaffold 38 Extended Girder Scaffold 38
STATIONARY SUSPENDED SCAFFOLD SYSTEMS
PARAPET SCAFFOLD
RAILROAD SCAFFOLD Mobile Rail Scaffold (Subway Painting) 50 Thru-Girder Wrap-Around Scaffold 51
Open Deck Cantilever Platform 51 Railroad Scaffold System 52
CABLE SCAFFOLD Cable Scaffold Preview 53Cable Scaffold Components 54Cable Scaffold Packaged Platforms 55Wire Rope Installation (Choker & Beam) 53
Pipe Ladder Clamp 56 I-Beam Ladder Clamp 56 Concrete Parapet Ladder Clamp 56 Side-Mounted Ladder Clamps 56
ACCESS EQUIPMENT
Parapet Rail Types 39 Parapet Dimensions & Considerations 40 Parapet Scaffold Components 41 Single Deck Parapet Scaffold 42 Double Deck (2 Ft.)Parapet Scaffold 42 Double Deck (2 Ft. & 4 Ft.) Parapet Scaffold 43 Stationary Cat-Walk Parapet Scaffold 43 Extended Parapet Scaffold 44 Wrap-Around Parapet Scaffold 44 Expanded Wrap-Around Parapet Scaffold 45 Expanded Parapet Scaffold 45 Stationary Heavy Duty Parapet Scaffold 46 Wrap-Around & Connecting By-Pass System 47 Mobile Barrier & Median Barrier Scaffold 48 Mobile Counter-Weight Cart Scaffold 49
FALL PROTECTION Static Line Fall Protection System 57 Fall Protection I-Beam Clamps 57 Prestressed Concrete I-Beam Clamp 57 Concrete Parapet Fall Protection Clamp 57
Rolling Parapet Guardrail System 58 Mobile Train Rail Guardrail System 58
GUARDRAIL SYSTEMS
Perimeter Guardrail System 59 Static Line Guardrail System 59
CLAMPS Mobile I-Beam Clamps 60 Mobile Angle Clamps 60 Stationary I-Beam Clamps 61 Screw Type I-Beam Clamps 61 Scissor I-Beam Clamps 62 Sweet Heart Beam Clamps 62 Heavy Duty Stationary I-Beam Clamps 62 Stationary Angle Clamps 62
Vertical Stems 63 Aluminum Support Beams 63 Steel Support Trusses 63 Hangers 64 Connectors & Accessories 65 Wheels 65
Code of Safe Practices 69 Daily Inspection Checklist 70 Index 71
ADDENDUM
STEMS, ALUMINUM BEAMS, TRUSSES, HANGERS, CONNECTORS, WHEELS
Guardrail & Accessories 66,68 Aluminum Stages, Beams & Scaffold Plank 67
GUARDRAIL & ACCESSORIESALUMINUM STAGES,BEAMS,& PLANKS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
→
→
The invention and introduction of Swing-Lo Suspended Scaffolds stemmed from the old adage, “necessity is the mother of invention”. That was the motivation behind the invention of Swing-Lo Suspended Scaffolds by H. George Leonard, a painting contractor whose bid was below his competitors. The idea was derived from the old ice tong and a pair of scissors. The combination of both items provided him with a model that would scissor and grip the bottom flanges of I-beams on bridges. This model, along with a connecting hanger component produced a simple suspended scaffold that could be easily erected and dismantled. The application and performance of this scaffold was well received, and soon became a demand by bridge and painting contractors. Thus, the painter became the manufacturer of a particular type of scaffold whose market has expanded from local to national to international.
Constant improvements in the design and fabrication of Swing-Lo Suspended Scaffolds have served to provide a safer, more efficient and economical scaffolding system for highway and utility contractors when access to work areas are a problem. Swing-Lo Suspended Scaffolds are patented with built-in, quick locking devices and fasteners for instant assembly. They have lessened the risks to the worker, lowered the cost, and increased safety in modern bridge and power plant construction and maintenance.
Today, Swing-Lo is a recognized designer and manufacturer of Suspended Scaffolding. We use the latest Computer-Aided (CAD) software to provide safe, quality solutions within budget and on-time delivery. Used by contractors and DOTs throughout the world, all Swing-Lo Systems meet or exceed OSHA safety standards and are fully supported by our technical consultants. Need suspended scaffolding NOW? Contact us and we will analyze your site to determine the most efficient design, then ship your scaffolding in as little as 5 to 10 working days.
Whether you’re working on new bridge or plant construction, planned outages, or ongoing maintenance, demand suspended scaffolding that comes in any size, suspends from any structure, and reaches any place.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
We can help configure your suspended scaffold ranging from a 1000 lb safe working load (SWL) assembly to a 12000 lb or more safe working load assembly. We provide seminars covering the safe use of Swing-Lo Suspended Scaffolding. Upon request, we will come to your facility and provide a Competent Person Workshop.
With Swing-Lo Suspended Scaffold patented modular designs, scaffolding is easy to erect and totally versatile. Suspending is easy:
1. START AT THE TOP Swing-Lo Clamps or Scissors clamp on structural members (steel or concrete). Many products are available depending on your requirements.
2. ADD HANGER ASSEMBLY A working deck of almost any size can easily be suspended at any eight by adding to Clamps the Connectors Stems, and Hangers or Truss. A complete assembly will safely support a 1000 lb to 12000 lb distributed working load,
3. ADD DECKING, GUARDRAILS, AND TOE BOARDS
→→
1. CLAMP PAGES 59-61
→
2. CONNECTOR PAGE 62
3. RAIL BRKT PAGE 65
4. VERTICAL STEM PAGE 62
5. TRUSS (PAGE 62) HANGER (PAGE 63)
6. GUARDRAILS (PAGE 65) DECKING (PAGE 66)
OUR HERITAGE
1000 LB SWL ASSEMBLY
4
WE CAN HELP
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897 5
Tight spots are no problem for Swing-Lo suspended scaffolding. More than a dozen clamp designs let you connect to channels, bar joists, I-beams, angles - even vertical columns - with equal ease, so you can get your skilled trades into those hard-to-reach places. And with multi-level platforms, several crews can work in the same area at one time.
Hundreds of modular configurations give you overhead access to areas from 4’ x 8’ to an entire football stadium. Rigid stems, trusses and platforms provide solid footing, less fatigue and greater worker safety. And that means more productivity per man hour.
● Put your crew to work on both sides and under neath the bridge simultaneously.
● Swing-Lo suspended systems permit inspections and repairs that don’t block activity above or below the bridge.
● Give your crew complete access to every inch of every bridge safely and economically.
● No tools needed to erect the systems. In fact, most systems can be assembled and erected in minutes. ● Systems can be installed permanently for periodic inspections and maintenance or disassembled and easily installed at another site.
Mobile By-pass Scaffold & Connecting Mobile Parapet ScaffoldPages 21-23, 39-47
Put your crew in a tight spot.
APPLICATIONS
Open Deck Railroad Bridge Scaffold Page 52
Mobile By-pass Scaffold & Connecting Mobile Parapet ScaffoldPages 21-23, 39-47
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Stationary Parapet Scaffold (Pages 39-47)
Grid Scaffold Deck (“Dance Floor”) Page 29
Mobile Parapet ScaffoldPages 39-47
Cable ScaffoldPages 53-55
Mobile Wrap-Around Parapet ScaffoldPages 44,45,47
6 Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile By-pass Scaffold with Inverted Mobile Beam Clamps - Call
Top-Riding Flange Scaffold, Page 26 Mobile Beam Clamp Suspended Scaffold, Page 18
7Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
Extended Girder Scaffold, Page 38 Parapet Scaffold, Pages 39-47
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile Parapet Scaffold with Ladder ClampPages 39-47, 56
Mobile By-pass Scaffold Pages 21-23
Stationary Beam Clamp Suspended ScaffoldPages 29-30
Extended Parapet ScaffoldPage 44
8 Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
9
Mobile Mono-rail Parapet Scaffold - Call
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
Mobile Parapet Scaffold, Pages 39-47 Bridged Mobile Parapet Scaffolds, Pages 39-47
Stationary Cat-Walk Parapet Scaffold, Page 43 Stationary Heavy Duty Parapet Scaffold, Page 46
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Stationary Beam Clamp, Hanger & Aluminum Beam Support Scaffold, Page 30
Single Beam (Fixed Beam) SUSPENDED SCAFFOLD Page 37
Mobile Beam Clamp, Hanger & Aluminum Beam Support Scaffold, Page 18
Monorail Track SCAFFOLDCall
Pier Column Scaffold, Page 34
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
10
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile Top Flange-Cart Scaffold, Page 26
Counter-Weighted Cart Scaffold, Page 49
Steel Girder Application Concrete Girder Application
Mobile Prestressed Concrete I-Beam Suspended Scaffold Pages 19-20
Mobile Thru-Girder Wrap-Around Scaffold, Page 51
Rai
l-Ind
epen
dent
Par
apet
Sca
ffold
C
all
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
11
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile I-Beam Clamp & Hanger with Aluminum Beam Support Multi-Level Suspended Scaffold, Page 24
Stationary Box Chord & Hanger with Aluminum Beam Support Suspended Scaffold - Call
Stationary Box Chord & Hanger with Aluminum Beam Support Suspended Scaffold - Call(Interior View)
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
APPLICATIONS
12
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
13
Stainless Steel Construction
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
PERMANENT SUSPENDED SCAFFOLD APPLICATION
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
BASCULE BRIDGE SCAFFOLD
14
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Inspect and maintain all areas of a Rig
Temporary or permanent suspended scaffold decks can be erected with attention given to a type of scaffold system best suited for a particular area. We will custom design and fabricate to meet a specific scaffold need
Swing-Lo Cable Scaffold is most effective where structural beams are not available for supporting a scaffold working deck. Cable trollies are anchored on both ends to support a rolling working deck. All Cable Scaffolds are equipped with brakes to maintain work-ing position.
Swing-Lo standard Beam Clamps (rolling or station-ary) attach and lock to structural beams to support a 1000lb. or more rated working deck. The By-Pass scaffold system enables the working deck to be moved around obstructions.
Swing-Lo Pier Column Scaffold is erected around pier columns to create a multi-level scaffold for reaching all areas of the pier column.Access to all scaffold decks is accomplished with a Swing-Lo Ladder Clamp and ladder.
Swing-Lo Scaffolds meet or exceed OSHA stan-dards.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
RIG SCAFFOLD SYSTEMS
15
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Package includes:
2 each HD-801 Hangers (29” Base, 38” high)4 each Scissor Beam Clamps
Package includes:
2 each CHD-140 Hangers (31” Base, 36” high)4 each Scissor Beam Clamps
CHD-140 PAINTERS SPECIAL
HD-801 HANGER ASSEMBLY
CHD-140 Painters Special is designed for painters of highway bridges and overpasses.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
CHD-140ASSEMBLY
HD-801ASSEMBLY
HD-801 Grid Hanger is used for super-structure staging. The quick-attach swivel hook allows rotation and alignment to proper working position.
*SHD and CSHD models use 2 3/8” diameter rollers (see page 65)
SCISSOR BEAM CLAMP & HANGER
CHD-140 PAINTERS SPECIAL HANGER SWL (LBS)BEAM CLAMP EXPANSION
CBHD #6610006-10
CMHD #6610008-16
CKHD #66100010-18
CSHD #66*1000
14-24”
HD-801 GRID HANGER “COAT HANGER”SWL (LBS)BEAM CLAMP EXPANSION
CBHD #6610006-10
CMHD #6610008-16
CKHD #66100010-18
CSHD #66*1000
14-24”
*SHD and CSHD models use 2 3/8” diameter rollers (see page 65)
16
31”
29”
24”to
36”
38”
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Package includes:2 each CHD-101 Hangers (29” Base, 36” high)4 each SL-71A32 32” Vertical Stem2 each W-20D Drum Winch with 5/16 X 100’ wire rope2 each SL-54C 1000 lb SWL Beam Clamps 8 each SL-35D Safety Rail Bracket (Bolt-Type)4 each SL-65A Scissor Insert Connector4 each Scissor Beam Clamps (choose model from above)
The CHD-101 Winch Frame Hanger System may be used at the piers with or without rolling on the beams. This system has a built in winch so that assembled scaffold can be raised to the desired working height. It is also ideal for working on the pier columns.
CHD-101 WINCH FRAMEHANGER SYSTEM
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
The CHD-101 Winch Frame Hanger Assembly is used at the piers while working on the Pier Columns.
WINCH FRAME HANGER SCAFFOLD
1000 LB SWL MOBILE APPLICATION
1000 LB SWL STATIONARY APPLICATION
CHD-101 WINCH FRAME HANGER SYSTEM
BEAM CLAMP EXPANSION
CBHD #666-10
CMHD #668-16
CKHD #66
10-18
CSHD #66*
14-24”
W-20D Drum Winch 5/16 x 100’ wire rope
WINCH FRAME HANGER SCAFFOLD
17
29”
24”
32” stemfor
adjust-ment
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
Mobile Beam Clamp & Truss Beam ExpansionSafe Working Load (SWL) lbPackage includes:
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 2 ea 4 Ft. Horizontal Truss4 ea Stage Board Locks
SL-54FSL-65C
SL-71A72SL-70BSL-70L
SL-54F2SL-65CHDSL-71AA72
SL-70BSL-70L
PACKAGED WEIGHT (LBS) 218 262
Easy movement, no tools required for erection; add to that the expand-ability of the platform. Go to the appropriate page for quantity and length of Aluminum Stage. Go to pages 63-64 for width of deck re-quired. Adjust your working elevation along the Vertical Stem. Change the I-Beam Clamp for any other suitable model (see page 60).
Page 67 for Aluminum StagePage 66 for Guardrails, Posts, & LocksPage 56, 59 for fall protection I-Beam Clamps
I-BEAM ROLLER CLAMP, STEM & TRUSSALUMINUM STAGE CONFIGURATION
I-BEAM ROLLER CLAMP, STEM, HANGER, ALUMINUM BEAM & PLYWOOD DECK CONFIGURATION
MOBILE BEAM CLAMP & TRUSS
MOBILE BEAM CLAMP & HANGER
I-BEAM ROLLER CLAMP, STEM AND HANGER (SLP-702A) USING 4” X 6” WOOD BASE CONFIGURATION
MOBILE BEAM CLAMP & HANGER
18
Mobile I-Beam Clamp & Hanger Beam ExpansionSafe Working Load (SWL) lbPackage includes: 8’ X 20’ Deck
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 4 ea Hangers (for aluminum beams)4 ea 6.5” X 114” Aluminum Beam 3 ea 5.5” X 252” Aluminum Beam18 ea Aluminum Beam Locking Clips3 ea 3/4” X 4’ X 96” Plywood (Rough)*
SL-54FSL-65C
SL-71A72SLP-702TSA1
SL-BM650X114SL-550X252
SL-70ALL
SL-54F2SL-65CHD2SL-71C72
SLP-702TSB4SL-BM650X114
SL-550X252SL-70ALL
PACKAGED WEIGHT (LBS) 382 426
*Plywood not included
Mobile I-Beam Clamp & Hanger Beam ExpansionSafe Working Load (SWL) lbPackage includes: 4’ X 8’ Deck
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 4 ea Hangers (for 4” X 6” Wood)4 ea 2” X 10” X 10’ Scaffold Plank 1 ea 3/4” X 4’ X 8’ Plywood (Rough)*
SL-54FSL-65C
SL-71A72SLP-702ASL-210X10
SL-54F2SL-65CHDSL-71AA72SLP-702ASL-210X10
PACKAGED WEIGHT (LBS) 246 290
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
*Plywood not included
MOBILE PRESTRESSED CONCRETE BEAM CLAMP MODELSMODEL RATED LOAD EXPANSION WT E F
SL-74R45A 2000 Lbs. 14” - 28” 72 45 Deg. 9”
SL-74R64A 2000 Lbs. 14” - 28” 72 64 Deg. 9”
SL-74R45B 2000 Lbs. 26” - 32” 74 45 Deg. 9”
SL-74R64B 2000 Lbs. 26” - 32” 74 64 Deg. 9”
PRESTRESSED CONCRETE BEAM CLAMP MODELSMODEL RATED LOAD EXPANSION WT E F
SL-74S45A 2000 Lbs. 14” - 28” 78 45 Deg. 9”
SL-74S64A 2000 Lbs. 14” - 28” 78 64 Deg. 9”
SL-74S45B 2000 Lbs. 26” - 32” 80 45 Deg. 9”
SL-74S64B 2000 Lbs. 26” - 32” 80 64 Deg. 9”
The Prestressed Concrete I-Beam models are designed to attach and lock onto prestressed concrete I-beams, and to support a suspended platform. Use 4 clamps with safety hooks, stems, and truss or hanger for one complete scaffold assembly. Additional units may be added for a larger working deck.
SL-74S45
This model can be modified to fit custom specifications. See sketch at left for required dimensions when ordering a custom fit clamp.
ANGLE ADAPTER KIT
PRESTRESSED CONCRETE I-BEAM CLAMP ANGLE ADAPTER KITS
MODEL DESCRIPTION WT
SL-74K4555 KIT TO CONVERT 45 DEG TO 55 33
SL-74K4564 KIT TO CONVERT 45 DEG TO 64 33
1. AXLE2. COTTER PIN3. RIGHT HAND BRACKET4. LEFT HAND BRACKET
Rolling
Stationary
(2) Ea.(4) Ea.(1) Ea.(1) Ea.
This kit is designed to change the angle of your concrete Prestressed Beam Clamp with a simple axle connection and relocation of the wheels. These kits are available only for the 45 Degree Prestressed concrete I-Beam Clamps.
SL-74R45
LH Bracket
RH Bracket
Wheels, Thrust Bearings, Washers, and axles are used from existing assembly
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE PRESTRESSED CONCRETE BEAM CLAMP
PRESTRESSED CONCRETE I-BEAM
SECTIONS
19
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
See page 64 for choice of an alternate Hanger. For example: SLP-702A when using4” X 6” Wood.
ROLLING PRESTRESSED CONCRETE I-BEAM ASSEMBLY MODEL DESCRIPTION Q WT
1
2345678
SL-74R45A
SL-D2412ASL-84SASL-71B48GWSL-35DSL-70L4SL-BM650X52SL-71AA72
2000 lb. Cap., 14”-28” exp., 45 deg., Rolling Prestressed Beam ClampStage Aluminum 24”X12’ 2-ManStage Post AdaptorGuardrail Post w/35D & TB LockSafety Rail Lock (2’X4” Wood Rail)Board Lock (Aluminum Beam)Beam Aluminum; 6.5” X 63” w/nailerStem Vertical; 1.75sq. X 72”
4
2668424
288
9618548
204456
910
SL-65CHDSL-70TCD
Safety Swivel Hook Connector; 2k Truss Connector (Aluminum Beam)Wood; 2” X 4” X 5’ (NOT Included)Wood 2” X 4” X 12’ (NOT included)
4444
2424
PACKAGED WEIGHT (LBS) 632
The Prestressed Beam Clamp System is ideal for installing and removing concrete forms. It is a fully adjustable platform along the Vertical Stem. When fully assembled, it provides a mobile platform that can be expanded to include By-Pass attachments when diaphragms, lateral bracing, or stiffners are present. The platform can be enlarged to include several bays.
NOTE:
Stationary Prestressed Beam Clamp (SL-74S series)can be converted to a mobile clamp by adding rollers.See page 19 for all models and conversion kits.
Attach clips and slotted bolt to lock beams at every loca-tion where the beams (top and bottom) intersect
Prestressed concrete I-beam application using aluminum truss and aluminum stagesing
Prestressed concrete I-beam application using aluminum beam and plywood decking
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE PRESTRESSED CONCRETE I-BEAM
SCAFFOLD
20
DETAIL Aing
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The By-Pass System is part of a revolutionary concept in scaffold engineering. Instead of using ground scaffolding, working decks are elevated by using clamp and hanger assemblies suspended from existing structural beams. This allows general contractors, painters, and maintenance crews to perform jobs over water, utility lines, high-ways, rugged terrains, and railroads without interrupting traffic and work operations below. Because suspended scaffolding requires few materials, no special tools and minimal labor to erect and assemble, savings of 50% or more are reported over conventional ground scaf-folding. The By-Pass System is designed to simplify the moving of
suspended working decks along the support beams. The suspended scaffold can be moved the entire length of the beam, by-passing cross beams without removing or leaving the working deck.This is accomplished by attaching ratchet binders and stems (com-plete with roller beam clamps) to the I-beam flange. The scaffold roller beam clamp and stem assembly which supports the working deck, is then lowered and the deck is rolled past the cross beam. Once repo-sitioned, the scaffold clamp and stem assembly are reclamped and locked to the beam flange. The ratchet binder and stem are lowered, and work can resume with minimum downtime.
Steel I-Beam Application Utilizing Plywood Decking
Steel I-Beam Application Utilizing Aluminum Stage Decking 1. Roll up to obstruction
←
2. Attach By-Pass Beam Clamp and Ratchet to Connector
4. Roll past obstruction
←
3. Use the Ratchet to take the weight off the outside Beam Clamp and detach outside beam Clamp
5. Re-attach outside Beam Clamp
6. Detach By-Pass Beam Clamp and advance deck
←
Attach clips and slotted bolt to lock beams at every location where the beams (top and bottom) intersect
SLP-702TS
←←←
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE BY-PASS SCAFFOLD
21
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
LARGE BY-PASS PLATFORM SIZES
MODEL SL-706 LARGE BY-PASS SUSPENDED SCAFFOLDNO. PART NUMBER DESCRIPTION QTY
1 SL-BM650X014 Beam Alm; 6.5” X 14’ w/Nailer 4
2 SLP-702TSB1 Truss Hanger Support w/Pin (2” Stem) 8
3 SL-54F2 Roller Beam Clamp; 2k RL; 5”-18” Exp. 4
4 SL-71C72 Stem, 2” X 2” X 72” Perf. Pre-Galv. 8
5 SL-65CHD2 Safety Swivel Hook Connector (2” Stem) 4
6 SL-65BPF By-Pass Ratchet/Stem Connector (C-Stem) 4
7 CM-05 Load Transfer Ratchet - 10” Barrel 4
8 SL-54F2BP Roller Beam Clamp; 2k RL; 5”-18”, w/BP C 4
9 SL-DX2424 Alm Stage, 24” X 24’ - 3-Man 6
10 SL-70L4 Aluminum Beam/Aluminum Stage Lock 12
PACKAGED WEIGHT (LBS) 1788
MODEL SL-706
Pages 63-64 for Aluminum Beams and HangersPage 60 for beam clamp models
Guardrails not shown for clarity
LARGE BY-PASS SUSPENDED SCAFFOLD
MODELNUMBER OF
STAGESWIDTH
(INCHES)LENGTH(FEET)
SL-704 4 24/28 *SL-705 5 24/28 *SL-706 6 24/28 *
The Large By-Pass Scaffold System is a mobile platform equipped with four suspension points and four transfer points.
*The length of stages used will determine the quantity and length of guardrails, endrails, and toeboards.
By-Pass Configuration
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
LARGE MOBILE BY-PASS SCAFFOLD
22
Page 67 for Aluminum Stages
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Small By-Pass Scaffold System is a mobile platform equipped with four suspension points and four transfer points. The Vertical Stems come with triangular By-Pass Brackets that allow for going around Diaphrams, Stiffeners, and Lateral Braces. The standard packaged platform is four feet wide by the desired length of the platform.
Steel I-Beam Application Using Aluminum Stage Decking
MODEL SL-602 SMALL BY-PASS SUSPENDED SCAFFOLDNO. PART NUMBER DESCRIPTION QTY
1 SL-70B Truss, 48” w/Stage Board Lock 2
2 SL-71A72 Stem, 1.75” Sq. X 72”, Perf. Pre-Galv. 4
3 CM-05 Load Transfer Ratchet - 10” Barrel 4
4 SL-54FBPA Roller Beam Clamp; 1k RL; 5”-18” , w/BPC 4
5 SL-65BPB2 By-Pass Bracket for 1.75” Sq. Stem 4
6 SL-65C Safety Swivel Hook Connector -1.75” Stem 4
7 SL-54F Roller Beam Clamp; 1k RL; 5”-18” Exp. 4
8 SL-DX2416 Stage Aluminum; 24” X 16’ 3-Man (750#) 2
9 SL-84SAH Stage Post Adaptor w/ 1.38” Offset fr. web 6
10 SL-71B48M Guardrail Post, Perf. Pre-Galv. w/Locks 6
11 SL-16AL Aluminum Guardrail, 1.5” Sq. X 192” 4
12 SL-GR0540 Aluminum Guardrail, 1.5” Sq. X 54” 4
13 SL-84GRL Guardrail Lock, J-Bolt for 1.5” Sq. Stem 8
14 SL-70L Truss Board Lock 4
PACKAGED WEIGHT (LBS) 828
SMALL BY-PASS SUSPENDED SCAFFOLD
MODELNUMBER OF
STAGESWIDTH
(INCHES)LENGTH(FEET)
SL-602 2 24/28 *SL-603 3 24/28 *SL-604 4 24/28 *
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
SMALL BY-PASS ATTACHMENT
SMALL MOBILE BY-PASS SCAFFOLD
23
SMALL BY-PASS PLATFORM SIZES
MODEL SL-602
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
MOBILE MULTI-LEVEL SCAFFOLDPART # DESCRIPTION QTY
SL-54X 4k RL Roller Beam Clamp, 6-12”Exp., 1.5”J 6SL-65CHD20 Double Stem to Eye Connector 6SL-71CX120 2” Sq. X 10’ Stem 18SLP-702TSB4 Hanger for Aluminum Beam, Short Body 18SL-650X0035 Aluminum Beam 6.5 X 3’6” 20SL-DX2820 Aluminum Stage, 28” X 20’, 3-Man 3SL-10AL 1.5” Sq. X 10’ Alum Guardrail 12SL-GR0380 38” Aluminum Guardrail 12SL-70LWB Sliding Board Lock for Aluminum Beam 22SL-84GRL3 Guardrail Lock 24SL-70L4 Board Lock for Aluminum Beam 2SL-D2810 Aluminum Stage, 28” X 10’, 2-Man 1SLP-702TSB4A Hanger for Aluminum Beam, single 4SL-65ESP20 HD Stem Connector 12
The Mobile Multi-Level Scaffold offers adjustability, functionality, and mobility. The workman can reach areas at various elevations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE MULTI-LEVEL SCAFFOLD
24
PACKAGED WEIGHT 1993
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Mobile Spreader Scaffold provides a single spreader expansion bar and two Roller Beam Clamp jaws, used in situations where there are stiffeners on one side of the girder, preventing movement of the rollers on a standard roller beam clamp.
The mobile Drop-Through Cart is designed for rolling on girder top flange (concrete and steel). It offers a platform that is adjustable, requiring no tools to erect. This modular platform is ideal when deep girders present an access problem in reaching the underside of the roadway. The scaffold is perfect for working between two bridge roadways. Easy erection, easy take down. Adjustable to girder depth above and below flanges. Can be used for various bridge applications.
The Swing-Lo Mobile Traveller Scaffold is designed to provide access to the crane rail. The scaffold can be made to the client’s specification. The Model SL-514CRA runs on a fourteen-foot track which, in turn, rolls on the crane rail. It comes complete with eight foot Vertical Stems, a thirty-eight inch wide by thirty-six inch long platform, access ladder brackets, and brakes.
SL-810DTC DROP-THROUGH ROLLING CART PART NO. DESCRIPTION QTYSL-7010 2 X 3 X 10’ Horizontal Traveller 2612PGC3 Roller Wheels with Brakes 415TSCSA-L Column Support Bracket w/Bumper 215TSCSA-R Column Support Bracket w/Bumper 271A096M 8’ Vertical Perforated Stem 4SL-70C 30” Truss w/Bolt Locks 2SL-D2808 28” X 8’ 2-Man Aluminum Stage 1SL-70L Stage/Truss Board Lock 2SL-15AB036C Horizontal Brace, 36” OC w/Lock CH 2SL-71B48M Perforated Steel Guardrail Post 4SL-84SA Stage Post Adapter 4SL-10AL 10’ Aluminum Guardrail 4SL-15CWA Horizontal Bumper Support 4
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE SPREADER SCAFFOLD PART NO. DESCRIPTION QTYSL-56X15 Spreader Roll Beam Clamp, 1k 2SL-65CHD Safety Hook Connector 4SL-71A072 6’ Vertical Perforated Stem 4SL-DX2820 28” X 20’ 3Man Aluminum Stage 1SL-70L Board Lock 2SL-70C 30” Truss Support 2SL-71B48M Guardrail Post 8SL-84SAH Stage Post Adapter 8SL-20AL 20’ Aluminum Guardrail 4SL-03AL 3’ Endrail 4SL-84GRL8 Guardrail Lock J-Bolt 8
MOBILE DROP-THRU SCAFFOLD
MOBILE TRAVELLER SCAFFOLD
MOBILE SPREADER SCAFFOLD
* Ladder not included
SL-514CRA MOBILE TRAVELLER SCAFFOLD PART NO. DESCRIPTION QTY514CRA-1 Spreader 2 X 4 X 168” 2514CRA-2 Top Support Assembly 2514CRA-3 39” Truss Assembly 2514CRA-4 Horizontal Bumper Arm 4514CRA-5 Track Roller Assembly 4514CRA-6 Ladder Clamp Assembly 215AB037C 37” Horizontal Brace w/ lks 271A096M 96” Vertical Stem 4SL-D1903 19” X 3’ Stage w/Hooks 2SL-03AL 3’ Guardrail 4SL-84GRL Guardrail Lock J-Bolt 8
25
MODEL SL-810DTC
MODEL SL-514CRA
MODEL SL-56X15
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-512BFS Bottom Flange Suspended ApplicationPART NO. DESCRIPTION QTYSL-15LAS Cart Wheels 4SL-70A72M Stage Support Truss 4SL-GB72 Vertical Stem w/Collar Locks 4SL-70CS Truss Support 4SL-70L Board Locks 4SL-4AL 4 ft. Aluminum Guardrail 4SL-12AL 12 ft. Aluminum Guardrail 4SL-84GRL Guardrail Bolt Locks 16SL-D2412 Aluminum Stage 24 in. x 12 ft. 2
SL-512BFR Bottom Flange Riding ApplicationPART NO. DESCRIPTION QTYSL-15LAS Cart Wheels 4SL-70A72M Stage Support Truss 2SL-84SA Stage Adapter 4SL-71B48M Perforated Guardrail Posts 4SL-70L Board Locks 4SL-4AL 4 ft. Aluminum Guardrail 4SL-D2412 Aluminum Stage 24 in. x 12 ft. 2
Designed for rolling on girder and beam flanges, working between two bridge roadways. Easy erection, easy take down. Adjustable to girder depth above and below flanges. Can be used for various bridge applica-tions.
Standard models are for spanning forty-eight inches between girders and designed to use twelve foot stages. This system is not suitable for bridges with stiffners. Please provide all applicable dimensions when inquiring.
The Swing-Lo Top Flange Mobile Scaffold is designed to fit types A, AA, and generic railroad bridges. The platform includes access hatch openings at each end, allowing the worker to step onto the girder for advancing the platform. Sliding gates allow for entry and exit. Foot Brakes, Anti-Tip, Adjust-able Locks, Guardrails (top and mid) on all sides. The inside lower bumper wheels track the girder.
Concrete Girder Application
TOP FLANGE MOBILE SCAFFOLD Rated Load... 500 lbsMODEL NO. DESCRIPTION WT
SL-610CGC 65” X 112” Top Flange Mobile Scaffold 270SL-614PGC 60” X 168” Top Flange Mobile Scaffold 300
Steel Girder Application
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE FLANGE SCAFFOLD
MOBILE TOP FLANGE SCAFFOLD
26
MODEL SL-610CGC
MODEL SL-614PGC
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
MOBILE SUSPENDED STRIPPING SCAFFOLD # PART NO. DESCRIPTION QTY1 PSC72AN Prestressed Beam Cart Jaw Assembly 62 PSCB53 Expansion Bar 31” 32 PSCB72 Expansion Bar 50” 37 15AB096F Horizontal Brace 96” 45 SL-HLT55008 5 1/2” x 8’ Aluminum Beam w/nailer 38 SL-71A024M 1 3/4” Sq. x 24” Vertical Stem 64 SLP-702TS Truss Hanger Support for 1 3/4” Stem 63 PSCG24 Cart Scaffold Guardrail Bracket 46 SL-35D Safety Rail Bracket (for 2x4 wood rail) 4
Swing-Lo Mobile Stripping Scaffold is designed to roll along prestressed concrete I-beam flanges. Adjustable expansion bars expand from beam to beam with the wheel assemblies attached at both ends. The Scaffold is equipped with side rollers and brakes to help maintain scaffold stability and mobility. The working deck is adjust-able horizontally as well as vertically to adapt to beam spacing. When fully assembled the scaffold measures from 6 feet to over 10 feet wide and 16 feet long. Dimensions to consider
prior to ordering
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE SUSPENDED STRIPPING SCAFFOLD
27
MODEL SL-PSC6285
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL- PSC9320 MOBILE STRIPPING CART ASSEMBLYPART NO. DESCRIPTION QTY
1 PC71E58 Prestress Cart Adhustable Arm As-sembly; 71 deg., 48-58” Expansion
3
2 SL-BM650X21 Beam Aluminum; 6.5” X 21’ Long with Plastic Nailer
3
3 SL-84ABA65 Post Support aluminum Beam adaptor with Detent Pin
4
4 SL-71B48M2 Guardrail Post: Perforated Steel 48” w/SL-35D & Toeboard Clamp
4
5 Plywood; 3/4”X4’X4.75” (NOT Incld) 26 Plywood; 3/4”X4’X21.5” (NOT Incld) 27 Plywood; 3/4”X4’X8’ (NOT Incld) 28 Wood; 2”X4”X6’ (NOT Incld) 4
BETWEEN GIRDERS APPLICATION
Between-the- girders application allows the worker to get closer to the bottom of the roadway. The Endrails are collapsable, allowing the platform to evade diaphrams and/or diagonal braces. Installation and removal of concrete forms proceeds uninterrupted. The width is adjustable forty-eight inches to fifty-eight inches, and up to twenty feet long.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE STRIPPING CART SCAFFOLD
28
MODEL SL-PSC9320
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
When wide-open, clear view suspended working platform is required for over-head construction or maintenance in auditori-ums, fieldhouses, hangers, etc., Swing-Lo beam clamp, stem, and hanger assemblies have proven to be a safe, versatile and economical solution. Configured in an eight foot by eight foot or ten foot by ten foot grid, the modular system can be expanded to any size platform. Rated live load can range from twenty-five pounds per square foot to fifty or more pounds per square foot.
1000 LB SWL ASSEMBLY
Pages 60-62 for beam clamp choicesPages 63-64 for stem and hanger choicesPage 67 for Aluminum Beams & Scaffold Plank
5000 LB SWL ASSEMBLY
SLP-702A USES 4” X 6” WOOD
SLP-702TS USES ALUMINUM BEAM
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
STATIONARY GRID SCAFFOLD
29
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Increase the size of your platform in a number of con-figurations. Alternate decking materials are available.
BEAM CLAMP ASSEMBLY - STATIONARY SL-54C SL-54CE
EXPANSION 5” - 18” 5” - 20”
SWL (LBS) 1000 1000JAW OPENING 3.375” 6.875”Package includes:4 ea. Beam Clamps (6” - 18”) exp., 4 ea SL-65C Safety Swivel Hook Connectors, 4 ea. SL-71A072 (72” Vertical Stem), 4 ea. SLP-702TS Hanger, 8 SL-35D Safety Rail Bolt Lock (for 2” X 4” Wood Rail), 4 ea. SL-BM650X0085 Aluminum Beam
STEM & TRUSS WITH ALUMINUM STAGE CONFIGURATION
STATIONARY BEAM CLAMP, STEM & HANGER WITH ALUMINUM BEAM CONFIGURATION
SLP-702AHANGER
(For 4X6 wood) SLP-702TSB4
HANGER(For aluminum beam)
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
STATIONARY BEAM CLAMP & TRUSS SCAFFOLD
STATIONARY BEAM CLAMP AND HANGER
30
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
BEAM CLAMP ASSEMBLY - STATIONARY DECK SL-54C SL-54DT
EXPANSION 5” - 18” 5” - 28”
SWL (LBS) 1000 2000
JAW OPENING 3.5” 3.5”
Package includes:6 ea. Beam Clamps 6 ea Safety Swivel Hook Connectors 6 ea. 72” Vertical Stems 6 ea. SL-70TCD Connectors 3 ea. SL-BM650X008 6.5” X 6’ Aluminum Beam20 ea. SL-35D Safety Rail Bolt Lock (2X4 Wood) 6 ea. SL-70L4 Aluminum Beam Board Lock
Waler Beam Clamps, when used in pairs, provide an effective and efficient scaffold. Commonly used when forming and stripping operations on a bridge deck or fascia require a wider working platform.
Swing-Lo Waler Beam Clamps are used with 2” x 6”, 8”, 10”, or 12” wood beams. Aluminum Channel Trusses (two 2” x 6” spaced back-to-back) or two Steel Channel Trusses are similarly attached to create a cantilevered working deck. Waler Beam Clamps should be evenly spaced (24” - 30” apart) on both the fascia beam flange and a second interior beam flange to accomodate the wood, aluminum, or steel channels 10’ to 16’ long.
After Waler Beams are spaced and positioned, 2” x 10” x 14’ planks are stag-gered approximately 2’ on center and covered with plywood decking. Guard-rail Posts with Toeboards complete the Fascia Waler Scaffold Assembly.
WALER FASCIA BEAM BRACKET
MODEL DESCRIPTION BEAM WIDTH
BEAM THICKNESS
SL-03FBWA 3 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-03FBWB 3 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”SL-04FBWA 4 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-04FBWB 4 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”SL-05FBWA 5 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-05FBWB 5 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”
The Waler Bracket is used as a temporary “cat-walk” support. The system provides a solid base for aluminum stages or planking and plywood decks. The Waler assembly includes guardrail post. See example below for obtaining proper spacing of the Waler Brackets.
Safe Working Load Limits:All Waler Fascia Beam Brackets are designed to support 250 lbs. per foot with 4:1 safety factor. Spacing and working loads are determined as follows:
EX: 4 ft. Waler Bracket = 4ft. X 250 Lbs. = 1000 lbs. 1000 lbs. divided by desired working load of 25 lbs./sq./ft =
1000 lbs. = 40 sq. ft. = 40 sq. ft. = 10 ft. spacing 25 lbs./sq./ft. 4 ft. Bracket
Leveler adjusts from 3/4” - 4” for beam thickness Jaw adjusts to fit a wide range of flange widths. See chart above.
Boardlocks secure aluminum stages.
Guardrail Posts (not shown) are easily removable.
Waler Brackets come in 3’ - 5’ lengths. The SL-05FBW is shown above.
Safe Working Load Specifications:
The Waler Beam Clamp is designed to support a pair of structural members as a cantilever, off a minimum of two (2) I-beams.
Determination of the decking support should be performed by a Licensed Engineer. Choice of structural members must consider the following:
1. Factor of safety of 4:1, based on desired distributed live load.2. End point concentrated load not more than 500 lbs. with 4:1 safety factor 3. Maximum deflection when fully loaded.
Total load shall not exceed Waler Clamp rated load of 2000 lbs., based on the square area of the support members and clamp. The ends of the structural support members should be braced adequately.
Swing-Lo Suspended Scaffold does not assume any liability for use of materials that have not been examined and approved by a certified engineer.
WALER BEAM CLAMPMODEL DESCRIPTION WTFB-C6S Waler Beam Clamp 35
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
WALER BEAM CLAMP SCAFFOLD
WALER FASCIA BEAM SCAFFOLD
31
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Tank Bracket Scaffold Assembly is designed to be used with clips welded to inside or outside of the tank surface. The Tank Bracket also includes Board Locks to be used with Scaffold Planks or Aluminum Stages. Perforated pre-galvanized guardrail post is included with each Tank Bracket to accomodate cable guardrails. The Tank Bracket comes in three sizes.
Tank Bracket (for Ring Girder)
The Tank Bracket for Ring Girder is used where a steel ribbon is welded to the circumference of a steel tank, providing a stable platform for the worker. The bracket is adjustable for various sizes in width and height.
Tank Bracket for Steel Tank
TANK SCAFFOLD PART NO. DESCRIPTIONSL-24TS 2’ wide Tank Scaffold Bracket w/1 ea Locking Clip,
guardrail post and board lock(s)SL-36TS 3’ wide Tank Scaffold Bracket w/1 ea Locking Clip,
guardrail post and board lock(s)SL-48TS 4’ wide Tank Scaffold Bracket w/1 ea Locking Clip, guard
rail post and board lock(s) SL-18RGB 1.5’ Tank Bracket for Ring GirderSL-71B48M 4’ Perforated Pre-Galvanized Guardrail Post
Guard Rail Post(for wire rope rail)
Number of Tank Brackets required = 3.14 X diameter, then divide by 8
The Mobile Tank Scaffold provides a rolling platform on the inside or outside of a tank wall for easy access to the work surface. The platform can be adjusted along the vertical stem for optimum working elevations. It can, also, be configured for your specific application. The scaffold comes complete with aluminum stage deck and guardrails. The ladder clamp can accommodate any standard ladder (not included in the pack-age). The Mobile Tank Scaffold is ideal for cleaning, re-lining, and re-surfacing of steel tanks.
MOBILE TANK SCAFFOLD
MODELLENGHT OFVERT. STEM
WIDTH(INCHES)
LENGHT(FEET)
SL-100MTS To 24 Ft. 24/28 7 OR 12SL-200MTS VARIES VARIES MODULAR
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
FORMULA
STATIONARY TANK SCAFFOLD
MOBILE TANK SCAFFOLD
32
MODEL SL-24TS
MODEL SL-18RGB
24”
14” 1.5”
MODEL SL-71B48MGC
MODEL SL-100MTS MODEL SL-200MTS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-20PSE PIER CAP SCAFFOLD - Pier Cap Width 2’ - 4’PART # DESCRIPTION QTY
1 20PS06A Pier Cap Top Assembly 22 15TSCSFN Lower Brace Bracket 43 20PS04 8’ Vertical Stem Assembly w/ 2” Channel 24 20PS02 8’ Vertical Stem Assembly w/ 2 1/4” Channel 25 SL-24SB 24” Stage Bracket 46 SL-71B48M Perforated Steel Pre-Galv Guardrail Post 47 SL-71B60M 1 1/2” Sq. X 5’ Perforated Steel Pre-Galv Stem 28 SL-35C Safety Rail Bracket 8
The Pier Cap Scaffold is designed to straddle pier caps at two points or more to provide the worker access to areas on both sides and ends of the pier. The standard package allows for twenty-four inch wide by twelve foot aluminum stages. Various sizes are available.
SL-20PTS PIER CAP SCAFFOLD - Saddle Style - Pier Cap Width 6’ - 8.5’ITEM MODEL DESCRIPTION1 SL-20PT085 Pier Cap Top Assembly2 SL-7012 2” X 3” X 12’ Vertical Perforated Stem3 SL-71B48M2 Perforated Steel Pre-Galv. Guardrail Post w/SL-35D Locks4 SL-84SAH Stage Post Adaptor5 SL-24SB 24” Stage Bracket6 SL-DX2430 Aluminum Stage, 24” X 30”; 3-Man7 SL-49B Stage Binder - 24”8 SL-15LAFW Lower Fixed Pad ; Wood Mount9 2” X 4” Wood Guardrail (customer supplied)
The SL-20PTS Pier Cap Scaffold is designed to straddle pier caps at two points or more to provide the worker access to areas on both sides and ends of the pier. Working decks are adjustable for width and length. This model adapts to slopes of eighty-five de-grees on the pier cap. The length of the Platform can be increased using the SL-49B Stage Binder.
2” X 4” Wood Rail
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
PIER CAP SCAFFOLD
33
MODEL SL-20PSE
MODEL SL-20PTS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
BEAM CLAMPSMODEL ULTIMATE LOAD EXPANSION JAW WT
SL-54E 6000 Lbs. 6” - 14” 2 1/2” 11SL-1254SC 8000 Lbs. 5” - 12” 1 3/8” 17SL-1518SC 15 Ton 15” - 18” 2 3/4” 45SAFETY CONNECTOR
MODEL DESCRIPTION WTSL-65CHD H.D. Safety Insert Connector 6VERTICAL STEMS (2” X 2”) HEAVY DUTY SL-71C72 72” Stem 14SL-71C96 96” Stem 19SL-71C120 120” Stem 24SL-71C144” 144” Stem 27ACCESSORIESSL-30CC Corner Guardrail Connector 4SL-60A16 Truss Insert 10SL-30GRC Guardrail Collar 11SL-65ESP H.D. Collar Connector 3SL-70L Truss Board Lock 5SL-35CHD Safety Rail Bracket 2SLP-702CHD H.D. Hanger, 4” x 6” Needle Beams 8SL-B80TB Toeboard Bolt Lock 1
HEAVY DUTY PIER CAP SCAFFOLD MODEL NO. SL-30PS
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
The SL-84CC Chord Clamp Assembly is designed to lock onto bridge structures. Standard clamp has a rated load of 1000 lbs. and is 30 inches in width. Clamp comes with J-Bolts for anchoring and a lad-der clamp for easy access to the platform. Other widths available on request.
SL-84CC H-BEAM CHORD CLAMP ASSEMBLYMODEL DESCRIPTION QTY WT
SL-84CC Chord Clamp 2 102SL-71A72 72” Stems 4 50SL-70TS(CC) Truss Support 4 24SL-70C36M 36” Truss 2 20SL-70L Board Locks 2 9SL-35C Safety Rail Brackets 8 12Total Weight: 227 lbs.
PIER SCAFFOLD
H-BEAM CHORD SCAFFOLD
34
MODEL SL-84CC
MODEL SL-30PS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-54BCC10 BOX CHORD SCAFFOLD - DUAL DECK 24” X 32’PART NO. DESCRIPTION QTYSL-54BCC10 Box Chord Scaffold Assembly w/ Stabilizer Brace 1SL-71C96M Vertical Perforated Stem, 2” X 2” X 8’ 4SLP-702TSB4 Truss Hanger Support, Short Body, w/detent Pins 4SL-70L4 Board Lock for Aluminum Beam - 702TS 4SL-70LWB Board Lock for Aluminum Beam - 6.5” 12SL-BM650X008 Beam, Aluminum; 6.5” X 8’ w/ Plastic Nailer 4
The Swing-Lo Box Chord Scaffold Model SL-54BCC10 is designed to lock onto bridge box chords, providing two twenty-four inch wide by up to forty feet of suspended aluminum decks. Stabilizers limit swaying and provides a rigid platform for a secure working environment.
SL-15AMB67 Suspended ApplicationPART NO. DESCRIPTION QTY
1 SL-15UJF UPPER HEAD ASSEMBLY - FIXED 22 SL-65DM1 V-Stem Lift Connector Assembly 23 SL-15AB059C Horz. Brace 59” CC w/Chn Lock 14 SL-15AB059T Horz. Brace 59” CC w/Tub Lock 15 SL-15LAF Fixed Mid Wheel Assembly 26 SL-7008 2” X 3” X 8’ Vertical Perforated Stem 27 SL-15TSHB Truss Hanger Suppt; 2” X 3” Vertical Stem 28 15AMB67-1N Box Chord Beam Clamp Jaw Assembly 29 15AMB67-2N Box Chord Beam Clmp Assmbly w/set scrw 210 SL-D2407 Stage Aluminum 24” X 7”; 2-Man 311 SL-BM650X008 Beam Aluminum 6.5” X 8’ w/Plastic Nailer 212 SL-70L4 Aluminum Beam Board Lock 613 SL-84SA Stage Post Adaptor 414 SL-07AL 7’ Aluminum Guardrail 615 SL-71B48M Perforated Steel Guardrail Post w/Locks 416 SL-84GRL Guardrail Lock J-Bolt for 1.5” Sq. 4
The Swing-Lo Chord to Parapet Scaffold is designed to connect the Outside Chord to the Bridge Parapet, giving the worker a platform six feet by seven feet. The Scaffold can be modified to a rolling system by adding rollers where appropriate.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
BOX CHORD SCAFFOLD
35
MODEL SL-54BCC10
MODEL SL-15AMB67
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-54CSC10 CHORD PLATFORM - CENTER PART NO. DESCRIPTION QSL-54UH10 Box Chord Upper Head Assembly 2SL-15CTE Box Chord Bottom Support 2SL-71E120M Stem, 2.5” Sq. X 120” Perforated 4SL-70G Truss, 25” 2SL-70L Truss Board Lock 2
The Box Chord Scaffold comes in a variety of configurations. They are designed to provide a stable and sturdy working deck to any and all sides of the chord. Add more stirrups to expand the platform length.
SL-54CDS11 DOUBLE SIDE CHORD PLATFORM PART NO. DESCRIPTION QSL-54UH11 Box Chord Upper Head 2SL-15CDS Box Chord Bottom Support 2SL-71E096M Stem, 2.5” Sq. X 120” 4SL-24SBF Stage Bracket, 24” w/ Bd Lck 4SL-71B48M2 Guardrail Post, Perforated w/35D 4
SL-54CSS09 SINGLE-SIDE CHORD PLATFORM PART NO. DESCRIPTION QSL-54UH09 Box Chord Upper Head 2SL-SL-15CSD Box Chord Bottom Support 2SL-71D72M Stem, 2.25” Sq. X 72” 2SL-28SBD Stage Bracket, 28” w/Bd Lck 2
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
SL-54CSA1 ABOVE CHORD PLATFORM MODEL NO. DESCRIPTION WT
SL-54CSA1 66” X 12.5’ Stationary Scaffold 350
The Swing-Lo Above Box Chord Cantilever Scaffold offers access without limit-ing the size of the working platform. No tools are needed to erect this adjustable and modular platform. The deck may be expanded up to seven feet wide, and up to the desired lenght.; simply add components. The standard platform (as shown) is sixty-six inches wide by twelve and a half feet long. All components except plywood included.
ABOVE BOX CHORD
SINGLE SIDE BOX CHORD
CENTER BOX CHORD
DOUBLE SIDEBOX CHORD
BOX CHORD SCAFFOLD
BOX CHORD CANTILEVER SCAFFOLD
36
END VIEW
MODEL SL-54CSA1
MODEL SL-54CSC3
MODEL SL-54CSS1MODEL SL-54CSD2
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Fixed Beam Saddle Scaffold provides acces to both sides of the beam or girder. The deck is adjustable along the lenght of the vertical stem. The length of the platform can be increased by adding more stirrups.
The Single-Side Beam Scaffold is easily placed and removed where it is needed. It is used for splicing beams and bolting beam sections. Guardrails provided when requested. The platform deck is adjustable along the vertical Stem. Wheels on the base of the Vertical Stem allow the platform to be erected below and rolled into place.
SL-1015B1 SINGLE-SIDE BEAM SCAFFOLD # PART NO. DESCRIPTION QTY1 SL-15US9 Upper Head for pivoting Stem 22 SL-15BRFS2 Horizontal Brace Support 23 SL-71E096M Stem, 2.5” Sq. X 96” Perforated 44 SL-24SBF Stage Bracket, 24” with Board Lock 25 SL-54D5 Side-Mounted Ladder Clamp - 2.5” Sq. 16 15CWA-234N Caster 2
SL-20PSG I-BEAM SADDLE SCAFFOLD # PART NO. DESCRIPTION QTY1 20PSG-1N Top Hanger Body Assembly 22 AR0629 Rod Adj. .75” X 29” 23 SL-71E096M Stem, 2.5” Sq. X 96” Perforated 44 AR0621C Rod Adj. .75” x 21” 25 SL-24SBF Stage Bracket, 24” with Board Lock 46 20PSG-2N Lower Brace Bracket Assembly 2
Designed specifically for railroad bridge inspection and maintenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure. Guardrails are purchased separately according to job requirements. An alternate configuration can be achieved when Aluminum Stages are used instead of wood decking. In that case, the illustrated Horizontal Truss may be used. Specify width of desired platform.
SL-RRP20 ELEVATED RAIL SCAFFOLD MODEL DESCRIPTION QTY
SL-90ER 6” - 14” Beam Clamp 4SL-71A72 6’ Galvanized Stems 4SLP-702A Needle Beam Hanger 4SL-B80TB Toeboard Clamp 4Total Weight:138 lbs.
Truss option for Aluminum Stage
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
ELEVATED RAIL SCAFFOLD
SINGLE-SIDE BEAM SCAFFOLD
I-BEAM SADDLE SCAFFOLD
37
MODEL SL-20PSG
MODEL SL-1015B1
MODEL SL-RRP20
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Designed specifically for railroad bridge inspection and maintenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure.
SL-4818HBP H-BEAM PILE SCAFFOLDPART # DESCRIPTION
1 SL-200CCB Column Bracket Assembly - 36” 22 SL-D2818 Stage Aluminum 28” X 18’ 500 lb 13 SL-71B48M Guardrail Post Steel w/Locks 84 SL-84SA Stage Post Adapter 85 SL-18AL 18’ Aluminum Guardrail 46 SL-28ER Endrail Aluminum 28” 47 SL-48SB 48” Stage Bracket w/Bd Lck 2
The Extended Girder Clamp Scaffold allows workers to gain easy and safe access to the girder’s fascia by way of a built-in ladder clamp. The 10 Ft. spaced and standard 10 Ft. hinged Vertical Stem makes it easy for one person to install. This modular scaffold allows for two foot by ten foot increments along the structure. Two sizes of the Extended Girder Clamp provides expansion from five to eleven inches, and twelve to eighteen inches. The platform is extended up to 26.5 in. away from the girder.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
H-BEAM PILE SCAFFOLD
EXTENDED GIRDER SCAFFOLD
STATIONARY H-BEAM CLAMP The H-Beam Column Clamp is used in pairs. When attached and locked to a steel H-Beam, the clamps provide a sturdy and secure base for an Aluminum Stage 14 inches wide and up to 40 feet in length. No tools required.
H-BEAM COLUMN CLAMP Rated Load... 500 lbs.MODEL NO. DESCRIPTION WT
SL-100CC 6 in. - 10 in. Expansion 20SL-160CC 12 in. - 16 in. Expansion 35
38
MODEL SL-90EGC
SL-90EGC EXTENDED GIRDER SCAFFOLDPART # DESCRIPTION QTY
1 90EGC1-2 Upper Head Bracket 5-18” Exp. 22 SL-7010 2” X 3” X 10’ Vertical Stem 23 SL-15AAB-A 10’ Adjustable horizontal Brace 24 SL-24SB 24” Stage Bracket w/Bd Lck 25 SL-64DM Front Mounted Ladder Clamp 16 SL-10AL 10’ Aluminum Guardrail 2
MODEL SL-4818HBP
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
PARAPET SCAFFOLD
SL-15A Parapet Scaffold features a 24in. x 7ft. working deck that mounts to 8ft., 12ft., and 16ft. perforated vertical stems. Electro-plated steel upper assembly locks into position on most types of rails. Rollers allow you to move entire scaffold along parapet with ease.
Assemble and lock this SL-15A Parapet Scaffold to most bridge rails in minutes with quick-locking pins. Proper assembly saves material and labor costs AND meets or exceeds OSHA’s standards.
Vertical Stem8ft.,12ft. & 16ft.
Aluminum Guard Rails
Working deckwidth/length2ft. x 7ft. or2ft. x 12ft.
Horizontal Brace:5ft. & 10ft.
Ladder Support
Horizontal Standoff Brace.
TYPICAL RAIL DESIGNS
Jersey Concrete Rail Steel on Concrete Rail
Aluminum Pipe Rail Steel Post and Rail
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897 39
The above rail designs are typical, however, the Upper Head Assembly is desinged to fit almost every type of parapet, including guardrails.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Lower Wheel Assembly
Steel Tube on Concrete Rail
D
E
A
B
C
When considering a Parapet Scaffold application, dimensions A, B, C, D, and E are critical in determining the appropriate model.
The Swing-Lo Parapet Scaffold is adaptable to most bridge parapets. The standard Upper Head Assembly will fit a 14 1/2” concrete parapet (A) up to 36 inches. The Upper Head Assembly can also adapt to a 4 inch and larger pipe rail. As in every case, a competent person must determine whether the structure is sufficiently strong to carry the live and dead load.
The Horizontal Bumper allows for up to 5 ft. horizontal support (B). The Horizontal Bumper allows for two types of support. The first application is to support the platform at the web of the girder. The second application allows for multiple platforms when the horizontal support is attached to the bottom flange of the girder.
The platform lengths (C) are 7ft. and 12ft. Only 24in width is provided. At a time of de-termining the number of decks required, please indicate how far under the sidewalk you would need to access.
Letter (D) specifies the length of the vertical stems. When considering the length of the vertical stem, you must determine the deck elevation. Typically 2 - 4 ft is subtracted from the vertical length, because of the stage bracket. The length of the vertical stem is pro-vided in 8, 12, and 16ft options.
Finally, consideration should be given to any obstruction such as, water pipe lines, cable lines, etc. along the bottom face of the parapet (E). In cases where these obstructions exist, a different Upper Head Assembly may be specified, along with a Stand-off pad for the Lower Wheel Assembly (SL-15LAS).
Following this page are several packaged units. Should these packages not meet your requirements, you may configure your own system by going to page 41.
Exterior Guardrails lock into position on Guardrail Posts to give you maximum protection while working. Four Guardrails and four Endrails are required.
Braces (2) hold and maintain the parallel distance of the Vertical Stems for a strong, rigid scaffold. This brace is positioned on the top of the Upper Head Assembly, the other is placed just below the Lower Wheel Assembly, or along the Vertical Stem as desired.
Vertical Stems (2 required) are available in lengths 8, 12, and 16 ft., to give you the right working eleva-tion. Custom lengths available.
Lower Wheel Assembly locks onto Vertical Stems at the elevation you need. Wheels add to scaffold’s mobility.
Stage Brackets (2 required) attach to vertical stems at the elevation you need. Simply add deck and you’re ready to work.
The included Ladder Support locks onto the Vertical Stem and adjusts to accomodate any working elevation. The ladder (not included) is held securely in place. The Lad-der Clamp comes in two sections: top and bottom.
Bumper Wheel Assem-blies add extra support at the lower end of the Vertical Stems and can be used in two different configurations. One is to roll against the web of the I-beam. Another can grip the bottom I-beam flange with two more adjust-able wheels that come standard with the Bum-per Wheel Assembly, as shown below.
The Interior Guardrails between the Vertical Stems are removable to form a 3-sided Guardrail System when access to deck below sidewalk is required.
The Working Platform comes in 2 sizes: 24in. wide x 7 ft. long, and 24 in. wide x 12 ft. long.
NOTE: The Parapet Scaffold can be configured to increase the length along the bridge by adding components.
Upper Wheel Assembly fits over concrete parapet and pipe rails. The Standard Head adjusts from 14.5 inches to 20 inches.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
PARAPET SCAFFOLD
40
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
UPPER HEAD ASSEMBLIESMODEL DESCRIPTION
SL-15UJW Standard Upper Head Assembly w/wheels - 14 1/2”SL-15UHD Heavy Duty Upper Head Assembly w/wheels - 17 1/2”SL-15UHD20 Heavy Duty Upper Head Assembly w/wheels - 20”SL-15UHD36 Heavy Duty Upper Head Assembly w/wheels - 36”MID WHEEL STAND-OFF ASSEMBLIES
MODEL DESCRIPTIONSL-10LAS 3 1/4” x 4” Double Mid Wheel AssemblySL-15LAS 2” x 8” Double Mid Wheel AssemblySL-15LDW 2” x 6” Double Mid Wheel AssemblySL-15BRR1A 2” x 8” Inner Double Mid Wheel Stand-OffPERFORATED VERTICAL STEMSSL-7012 2” X 3” Vertical Perforated Stem 12’SL-7016 2” X 3” Vertical Perforated Stem 16’SL-7512 2” X 6” Vertical Perforated Stem 12’SL-7516 2” X 6” Vertical Perforated Stem 16’HORIZONTAL BRACESSL-15AB059T 1 1/2” Sq. x 5’ Tubing BraceSL-15AB059C 1 1/2” Sq. x 5’ Channel BraceSL-15AB120T 1 1/2” Sq. x 10’ Tubing BraceSL-15AB120C 1 1/2” Sq. x 10’ Channel BraceHORIZONTAL SUPPORTSSL-15CVR Support with 2 each 3 1/4” x 4” V-Rollers, 5’ StemSL-15CVS Support with 2 each 3 1/4” x 4” V-Rollers, 6’ StemSTAGE BRACKETSSL-24SB 2 Ft. Stage BracketSL-24SBB 2 Ft. Stage Bracket w/Clip LockSL-48SB 4 Ft. Stage BracketSL-72SB 6 Ft. Stage BracketALUMINUM STAGESSL-D2407 2 Ft. x 7 Ft. Aluminum Stage (2 Man)SL-D2412 2 Ft. x 12 Ft. Aluminum Stage (2 Man)GUARDRAILSL-GR0800 1 1/2” Sq. X 80” Aluminum GuardrailSL-GR0610B 1 1/2” Sq. X 61” Aluminum GuardrailSL-GR1410 1 1/2” Sq. X 141” Aluminum GuardrailSL-GR1220B 1 1/2” Sq. X 122” Aluminum GuardrailENDRAILSSL-24ERL Endrail 2 Ft., W/15ERL6SL-48ERL Endrail 4 Ft., W/15ERL6SL-72ERL Endrail 6 Ft., W/15ERL6GUARDRAIL POSTSSL-15GRP 1 1/2” Sq. X 48” Aluminum Guardrail PostSL-71B48M 1 1/2” Sq. X 48” Perforated Steel Guardrail PostSL-15GRPA 1 1/2” Sq. X 48” Aluminum Guardrail PostLADDER CLAMPSSL-64A Pipe Ladder ClampSL-64D Side-Mounted Ladder Clamp
SL-15AB059T
SL-15AB059C
SL-D2412
SL-15LAS
SL-15ERL6
SL-84GRC
SL-15GRP
SL-24SB
SL-15UHD
SL-15UJW
SL-64LC
SL-84GRL
SL-64D
SL-10LAS
SL-24ERL
SL-7512
SL-15CVR
SL-64A
SL-15UHD20
SL-15UHD36
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
PARAPET SCAFFOLD COMPONENTS
41
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING PARAPET SCAFFOLD PARAPET SCAFFOLD MODEL NO. SL-15A12D20 2 Ft. x 7 Ft. 1 DeckNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UJW Upper Head Assembly 14.5” - 20” EXP.2 2 SL-7012 2”x3”x12’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 2 SL-24SBB 24” Stage Bracket w/Stage Lock Clip6 1 SL-15AB059C 1.5” sq. x 59” Channel Brace7 1 SL-15AB059T 1.5” sq. x 59” Tubing Brace8 2 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 2 SL-GR0800 1.5” sq. x 80” Aluminum Guardrail10 2 SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail11 4 SL-24ERL 1.5” sq. x 24” Aluminum Endrail Assembly12 1 SL-64D Ladder Clamp13 1 SL-D2407 24” wide x 84” long Aluminum Stage (2 Man)
Total Weight: 350 lbs. 500 LB SWL
PARAPET SCAFFOLD MODEL NO. SL-15A12D22 2 Ft. x 7 Ft. 2 DecksNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UJW Upper Wheel Assembly 14.5” - 20” EXP.2 2 SL-7012 2”x3”x12’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 4 SL-24SBB 24” Stage Bracket w/Board Lock6 1 SL-15AB059C 1.5” sq. x 120” Channel Brace7 1 SL-15AB059T 1.5” sq. x 120” Tubing Brace8 4 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 4 SL-GR0800 1.5” sq. x 80” Aluminum Guardrail10 2 SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail11 8 SL-24ERL 1.5” sq. x 24” Aluminum Endrails12 1 SL-64D Ladder Clamp13 2 SL-D2407 24” wide x 84” long Aluminum Stage (2 Man)
Total Weight: 450 lbs. 500 LB SWL
PARAPET SCAFFOLD MODEL NO. SL-15AA12D20 2 Ft. x 12 Ft. 1 DeckNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UJW Upper Head Assembly 14.5” - 20” EXP.2 2 SL-7012 2” x 3” x 12’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 2 SL-24SBB 24” Stage Bracket w/Stage Lock Clip6 1 SL-15AB120C 1.5” sq. x 120” Channel Brace7 1 SL-15AB120T 1.5” sq. x 120” Tubing Brace8 2 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 2 SL-GR1220B 1.5” sq. x 122” Aluminum Guardrail10 2 SL-GR1410 1.5” sq. x 141” Aluminum Guardrail11 4 SL-24ERL 1.5” sq. x 24” Aluminum Endrail Assembly12 1 SL-64D Ladder Clamp13 1 SL-D2412 24” wide x 144” long Aluminum Stage (2 Man)
Total Weight: 402 lbs. 500 LB SWL
PARAPET SCAFFOLD MODEL NO. SL-15AA12D22 2 Ft. x 12 Ft. 2 DecksNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UJW Upper Head Assembly 14.5” - 20” EXP.2 2 SL-7012 2”x3”x12’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 4 SL-24SBB 24” Stage Bracket w/Stage Lock Clip6 1 SL-15AB120C 1.5” sq. x 120” Channel Brace7 1 SL-15AB120T 1.5” sq. x 120” Tubing Brace8 4 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 2 SL-GR1220B 1.5” sq. x 122” Aluminum Guardrail10 4 SL-GR1410 1.5” sq. x 141” Aluminum Guardrail11 8 SL-24ERL 1.5” sq. x 24” Aluminum Endrail Assembly12 1 SL-64D Ladder Clamp13 2 SL-D2412 24” wide x 144” long Aluminum Stage (2 Man)
Total Weight: 500 lbs. 500 LB SWL
*
*
* Ladder not included
* Ladder not included
ROLLING PARAPET SCAFFOLD
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-889742
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-35AA STATIONARY BRIDGE RAIL SCAFFOLDPART NO. DESCRIPTION
SL-35BRC Stationary Upper Head Assembly ClampSL-7016 2” x 3” x 16’ Vertical Perforated StemSL-24SB 24” Stage Bracket w/Board LocksSL-48SB 48” Stage Bracket w/Board Locks
* Ladder not included
This assembly is designed for use as a “cat walk” system, and is adaptable to most structural bridge rail designs.
PARAPET SCAFFOLD MODEL NO. SLH-15A16D24 2 ft. & 4 ft. Decks, 7 ft. LongNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UHD Upper Head Assembly 16.5” - 22” EXP.2 2 SL-7516 2” x 6” x 16’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 2 SL-24SBB 24” Stage Bracket w/Stage Lock Clip6 1 SL-15AB059C 1.5” sq. x 59” Channel Brace7 1 SL-15AB059T 1.5” sq. x 59” Tubing Brace8 2 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 2 SL-15GRP 1.5” sq. x 48” Aluminum Guardrail Post10 4 SL-GR0800 1.5” sq. x 80” Aluminum Guardrail11 2 SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail12 4 SL-24ERL 1.5” sq. x 24” Aluminum Endrail Assembly13 4 SL-48ERL 1.5” sq. x 48” Aluminum Endrail Assembly14 2 SL-48SB 48” Stage Bracket w/Board Locks15 1 SL-64D Ladder Clamp16 3 SL-D2407 24” wide x 84” long Aluminum Stage (2 Man)
Total Weight: 600 lbs. 750 LB SWL
PARAPET SCAFFOLD MODEL NO. SLH-15AA16D24 2 ft. & 4 ft. Decks, 12 ft. LongNO. QTY. MODEL NO. DESCRIPTION
1 2 SL-15UHD Upper Head Assembly 16.5” - 22” EXP.2 2 SL-7516 2” x 6” x 16’ Vertical Perforated Stem3 2 SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)4 2 SL-15CVR Horizontal Brace w/Rotating Vertical Rollers5 2 SL-24SBB 24” Stage Bracket w/Stage Lock Clip6 1 SL-15AB120C 1.5” sq. x 120” Channel Brace7 1 SL-15AB120T 1.5” sq. x 120” Tubing Brace8 2 SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post9 2 SL-15GRP 1.5” sq. x 48” Aluminum Guardrail Post10 2 SL-GR1220B 1.5” sq. x 122” Aluminum Guardrail11 4 SL-GR1410 1.5” sq. x 141” Aluminum Guardrail12 4 SL-24ERL 1.5” sq. x 24” Aluminum Endrail Assembly13 4 SL-48ERL 1.5” sq. x 48” Aluminum Endrail Assembly14 2 SL-48SB 48” Stage Bracket w/Board Locks15 1 SL-64D Ladder Clamp16 3 SL-D2412 24” wide x 144” long Aluminum Stage (2 Man)
Total Weight: 650 lbs. 750 LB SWL To configure a 6 ft. platform under sidewalk, deduct Item nos. 13 & 14, then add 2 each SL-72SB (6 ft. Stage Bracket) & 4 each SL-72ERL (6 ft. Endrail Assembly). This will change the model number to SLH-15AA16D26.
See page 66 for Guardrails and Accessories.
*
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
ROLLING PARAPET SCAFFOLD
STATIONARY RAIL SCAFFOLD
43
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Cut the cost of stripping, sandblasting, and maintainence on bridges designed with overhangs. Swing-Lo model SL-25AA is ideal for removing forms. The Upper Assembly extends the scaffold up to 48 inches away from the parapet, positioning the working deck right where the job needs to be done. The scaffold clamps to most bridge rails or parapets, and is equipped with rollers for easy mobility.
This unit requires few components, no tools, and assembles in minutes. It pro-vides safe access to hard to reach areas. It does not interfere with traffic below. Compared to conventional scaffolding, the Parapet Scaffolding can save you up to 50 percent in scaffolding costs.
The SL-15WA Wrap-Around Parapet Scaffold lets you maxi-mize the efficiency of your work force. Wrap-Around design lets you simultaneously work along both sides of the bridge AND un-derneath it. Roller Clamps let you reposition the scaffold as work progresses.
SL-25AA EXTENDED PARAPET SCAFFOLDPART NO. DESCRIPTION QTYSL-25UA Upper Assembly With Wheels (6 in - 16 in. adj.) 2SL-7516 2” x 6” x 16’ Vertical Perforated Stem 2SL-48SB 48” Stage Bracket w/Board Locks 2SL-15AB120X 10 ft. X-Brace 1SL-15AB120C 10 ft. Horizontal Brace 2SL-12AL 1.5 in. sq. x 144 in. Aluminum Guardrail 4SL-48ER 1.5 in. sq. x 48 in. Aluminum Endrail 4SL-15GRP 1.5” sq. x 48” Aluminum Guardrail Post 2SL-64LC Ladder Clamp 1SL-D2412 24” wide x 144” long Aluminum Stage, 500 lb. 2Total Weight: 882 lbs. 500 LB SWL
SL-15WA WRAP-AROUND PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UJW Upper Assembly With Wheels (6 in - 16 in. adj.) 4SL-7016 2” x 3” x 16’ Vertical Perforated Stem 4SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 4SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 4SL-24SBB 24” Stage Bracket w/Board Lock 4SL-15AB059C 1.5” sq. x 59” Channel Brace 2SL-15AB059T 1.5” sq. x 59” Tubing Brace 2SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post 4SL-GR0800 1.5” sq. x 80” Aluminum Guardrail 8SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail 8SL-24ERL 1.5” sq. x 24” Aluminum Endrails 8SL-64D Ladder Clamp 2SL-D2407 24” wide x 84” long Aluminum Stage 2SL-15WB Diagonal Brace 4SL-15TS Horizontal Truss Support 4SL-70L Stage/Truss Board Lock 4SL-70A72M 6 ft. Stage Support Truss 2Total Weight: 900 lbs. 500 LB SWL
2 each 28 inch wide x desired length required decks under bridge. Guardrails, Guardrail Post, and Connectors, provided on pages 66-68. Determine quantity and add to package above.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
EXTENDED PARAPET SCAFFOLD
WRAP-AROUND PARAPET SCAFFOLD
See pageL 57 for Mobile Parapet Fall Protection Clamps.
See pageL 57 for Mobile Parapet Fall Protection Clamps.
44
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Parapet Scaffold can be expanded to increase the deck size up to forty feet.
The Expanded Wrap-Around Parapet Scaffold can be expanded to increase the platform lenght and height.
SL-15WA3 WRAP-AROUND PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UHD HD Upper Assembly With Wheels (9 -14.5” adj.) 6SL-7520 2” x 6” x 20’ Double-Back Vertical Perforated Stem 6SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 6SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 6SL-24SB 24” Stage Bracket w/Board Lock 6SL-15AB120C 1.5” sq. x 120” Channel Brace 4SL-84SA Stage Guardrail Post Adapter 8SL-71B48M 1.5” sq. x 48” Aluminum Guardrail Post 8SL-GR1304 1.5” sq. x 130.44” Aluminum Guardrail 8SL-84GRC Guardrail Connector 4SLP-702TSB4A Aluminum Beam Truss Support 12SL-64D Ladder Clamp 2SL-D2422 24” wide x 22’ long Aluminum Stage 2SL-BM750X0240 Aluminum Beam 7.5” X 24’ W/Nailer 4Total Weight: 980 lbs.
Ladder NOT included
See page 41 to configure your platform; See pages 66-68 for aluminum stages and guardrails for connecting two Parapet Systems based on the width of the bridge.
See page 41 to configure your platformSee pages 66-68 for aluminum stages and guardrails
SL-15X320 PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UJW Standard Upper Head Assembly w/wheels - 14 1/2” 3SL-7012 2” x 3” x 12’ Vertical Perforated Stem 3SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 3SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 3SL-24SB 24” Stage Bracket w/Board Lock 3SL-15AB096C 1.5” sq. x 96” Channel Brace 2SL-106019700 1.5” sq. x 197” Tubing Brace 1SL-84SAH Stage Post Adapter w/ 1.38” offset from web 8SL-20AL 1.5” sq. x 240” Aluminum Guardrail 8SL-71B48M 1.5” sq. x 48” Aluminum Guardrail Post 8SL-03AL 1.5” sq. x 36” Aluminum Guardrail 4SL-15AK00ST Horizontal Brace Bracket - 5” 3SL-64D Ladder Clamp 1SL-DX2420 24” wide x 20’ long Aluminum Stage; 3-Man 1SL-84GRL8 Guardrail Lock; J-Bolt for 1.5” Endrail 8Total Weight: 980 lbs.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
EXPANDED WRAP-AROUND PARAPET SCAFFOLD
EXPANDED PARAPET SCAFFOLD
45
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
750 LB SWL
500 LB SWL
See pageL 57 for Mobile Parapet Fall Protection Clamps.
The Heavy Duty Series SLH Parapet Models are ideal for situations where a longer platform is needed without the restrictions of using a fixed brace. By using the Stabilizer brace, the contractor can expand his platform lenght at wider spacing intervals. The platform may be positioned along the Vertical Stem at the desired elevation. The unit below is packaged with-out the aluminum stage so the contractor may make that determination. A twenty-four inch stage bracket is used in this configuration, however, a twenty-eight inch stage bracket may be substituted.
SLH-15X12D20 HD SCAFFOLD SWL 750MODEL DESCRIPTION QTY
1 SL-15UHDF Stationary HD Upper Head 22 SL-7512 2” X 6” X 12’ Double-Back Stem 23 SL-15LAF Fixed Mid Assembly 24 SLH-15ASB Fixed Stabilizer Brace 25 SL-64D Side-Mounted Ladder Clamp 1
Ladder NOT included; contractor may use any standard ladder
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
HEAVY DUTY PARAPET SCAFFOLD
SLH-15X12D20
46
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
750 LB SWL
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897 47
HD WRAP-AROUND PARAPET SCAFFOLD & CONNECTING BY-PASS PLATFORMThe Heavy Duty SLH-15WAHD Wrap-Around Parapet Scaffold with the connecting By-Pass System offers the flexibility of “wrapping” the bridge. When the width of the bridge prevents you from using the standard wrap-Around Parapet Scaffold (SL-15WA), just add the intermediate rolling system. When there are stiffeners, diaphrams, or other obstructions, include the By-Pass attachments. This system offers strength and flexibility.
HD SLH-15WAHD WRAP-AROUND PARAPET SCAFFOLD & MID BY-PASS SYSTEMMODEL DESCRIPTION QTYSL-15UHD20 HD Upper Head Assembly with
wheels-20”4
SL-7516 2” x 6” x 16’ Double-Back Vertical Perforated Stem
4
SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)
4
SL-15CVRM HD Horizontal Brace w/Rotating Vertical Rollers
4
SL-24SBB 24” Stage Bracket w/Board Lock & Locking clip
4
SL-15AB120C 1.5” sq. X 120” Channel Brace 2SL-15AB120T 1.5” sq. X 120” Tubing Brace 2SL-24ERL 24” Aluminum Endrail w/Corner
Connectors8
SL-15GRPA 48” Aluminum Guardrail Post 4SL-GR1410 1.5” sq. x 141” Aluminum Guard-
rail4
SL-D2412 24” x 12’ Aluminum Stage 2SL-71C72 2” sq. x 72” Vertical Perforated
Stem4
SL-54F2 2k Roller Beam Clamp; 6”-18” Expansion
2
SL-54F2BP 2k Roller Beam Clamp; 6-18” Exp. w/By-Pass Conn
2
SL-65BPF By-Pass Ratchet/Stem Connector (C Stem)
2
CM-05 Load Transfer Ratchet 2SL-84SA Stage Guardrail Post Adapter 12SL-71B48M 1.5” sq. x 48” Aluminum Guardrail
Post12
SL-16AL 1.5” sq. x 192” Aluminum Guard-rail
8
SLP-702TSB4 Hanger; Aluminum Beam; Short Body
4
SLP-702TSB4A Aluminum Beam Truss Support 4SL-64D Ladder Clamp 2SL-DX2420 24” wide x 20’ long Aluminum
Stage8
SL-BM650X0120 Aluminum Beam 6.5” X 12’ W/Nailer
4
SL-70L4 Aluminum Beam Board Lock 9SL-70L4AL Aluminum Beam Board Lock - 15” 3Total Weight: 1,273 lbs.
Ladder NOT included; contractor may use any standard ladder
SLH-15WAHD
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-80DHV2 fits walls 8 1/2 - 18 inches in thicknessSL-25UAV fits walls 6 - 16 inches in thicknessSL-25UAV3 fits walls 12 - 24 inches in thickness
ROLLING BARRIER WALL CLAMPSMODEL DESCRIPTION
SL-80DHV2 Rolling Barrier Wall Clamp SL-25UAV Rolling Extended Parapet Clamp - 3 Ft.SL-25UAV3 Rolling Extended Parapet Clamp - 2 Ft.
The Swing-Lo model SL-80DHV2 Rolling Barrier Clamp with brakes is used with other components to create a stable and effective working platform. Add the CHD-101 Stage Hangers, an Aluminum Stage, Guardrail System, and Winches. A work crew can traverse a Barrier Wall, saving time, and maximizing profits.
Use the SL-25UAV Rolling Extended Barrier Wall Clamp to extend out, up to 4 feet from the wall to avoid obstructions.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE BARRIER SCAFFOLD
SL-80MB MEDIAN BARRIER SCAFFOLD provides a rolling platform on the median Jersey barrier railing from which the paver has access to finishing details on fresh concrete road surfaces. Eliminates worker fatigue from hanging over the barrier. Working deck is approximately 12” to 18” above work surface, with a deck size of twenty-four inches wide by seven feet long.
MOBILE MEDIAN BARRIER SCAFFOLD
48
MODEL SL-80MB
MODEL SL-25UAV MODEL SL-80DHV2 MODEL SL-25UAV3
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
1000 LB SWL 1000 LB SWL 1000 LB SWL
750 LB SWL
The Counter-weighted Overhang Scaffold is ideal for accessing areas up to seven feet under the bridge from the bridge fascia. A two foot access platform is included.
SL-25DD14 with 2 Ft. and 6 Ft. DecksNO PART NO. DESCRIPTION QTY1 25DD14 Counter-Weight Cart w/ wheels & brakes 12 CW-50 50-LB Counterweights 1003 SL-7620 3” X 6” X 20’ Vertical Stem 24 SL-84SB 7’ Stage Bracket 25 SL-28SBE 28” Stage Bracket 26 SL-64D4 Ladder Clamp 17 SL-DX2816 28” X 16’ Aluminum Stage, 3-Man 48 SL-84SAH Stage Post Adapter 109 SL-71B48M2 Perforated Steel Guardrail Post 610 SL-35D Safetyrail Bolt Lock (for 2”X4” wood rail) 2411 2” X 4” X 8’ wood rail (not included) 1212 2” X 4” X 3’ wood rail (not included) 413 Straight Ladder (not included) 1
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE COUNTER-WEIGHT SCAFFOLD
Model SL-25DD14 Counter-weighted Overhang Scaffold with two-foot access deck, and six-foot interior working deck (illustrated).
49
MODEL SL-25DD14
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
800 LB SWL
The Swing-Lo Girder-Edge mobile scaffold is designed with a Safe Working Load of 800 pounds; with a deck size of 54 inch by 10 Ft., the scaffold is moved along the girder with stiffners, but with sufficient clearance to allow the scaffold to roll. Easy to install, no special tools are required. Wood (4” X 6”) or aluminum beams provide the base, covered with 3/4 inch (rough) plywood or Scaffold Plank decking. All wood, including 2” X 4” guardrails supplied by customer. An optional drive system is offered.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
GIRDER-EDGE SCAFFOLD Rated Load... 800 lbs.MODEL NO. DESCRIPTION WT
SLH-144A 54” X 10’ Mobile Scaffold 1385
The SL-0812SPC Subway Painting Scaffold is designed to roll on track rails and provide a safe work area overhead that is adjustable in height from 9’ 6” to 11’ 9”. Adjustment is provided by means of screw jacks lo-cated on the top and bottom of the open scaffold frames. Each scaffold is equipped with hand brakes located at the wheel bases. The deck is made of fire retardent material. Anti-tip devices included.Two or more Carts may be used in tandem with the included hitch system.
SUBWAY PAINTING SCAFFOLDMODEL DECK AREA HEIGHT WT
SL-0812SPC 7’ X 12’ 9’ 6” - 11’ 9” 1212
MOBILE GIRDER-EDGE SCAFFOLD
MOBILE RAIL SCAFFOLD
50
MODEL SLH-144A
MODEL SL-0812SPC
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Thru-Girder Wrap-Around Scaffold is designed to provide access to all sides of a Thru-Girder railroad bridge.
SL-RRP10 THRU-GIRDER WRAP-AROUND SCAFFOLD MODEL DESCRIPTION QTY
SL-10UA Adjustable Upper Head Assembly 16 - 22” exp. 4SL-7012 12’ Vertical Perforated Stem 4SL-10LAS Lower Wheel Assembly 8SL-24SBB 24” Stage Bracket w/Lock Clips 4SL-15AB059C 1.5” sq. x 59” Channel Brace 2SL-15AB059T 1.5” sq. x 59” Tubing Brace 2SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post 4SL-GR0800 1.5” sq. x 80” Aluminum Guardrail 4SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail 4SL-24ERL 1.5” sq. x 24” Aluminum Endrails 8SL-64D Side Mounted Ladder Clamp 2SL-D2407 2’ x 7’ Aluminum Stage 2SL-15WB Diagonal Brace 4SL-15TS Horizontal Truss Support 4SL-70L Stage/Truss Board Lock 4SL-70A72M 6’ Stage Support Truss 2Total Weight: 600 lbs.
2 each 28 inch wide x desired length aluminum stage (not included in package below). Guardrails, Guardrail Post, and Connectors, provided on pages 66-68. Determine quantity and add to package below.
SL-416CRS CANTILEVER PLATFORM PART # DESCRIPTION QTY
1 SL-90EGC4 Girder Supported Truss 32 SL-90EGC4L Stage Lock 2
The Thru-Girder Cantilever Platform is used as an escape platform for workers when they need to leave the track area immediately.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
THRU-GIRDER WRAP-AROUND SCAFFOLD
OPEN DECK CANTILEVER PLATFORM
51
MODEL SL-416CRS
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Designed specifically for railroad bridge inspection and main-tenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure.
RAILROAD SCAFFOLD SYSTEM
TOP SUPPORT MID SUPPORT VERTICAL STEM DECK SUPPORT
Top Girder Clamp: SL-90ER241. Attach to structural plate girder2. 12” - 24” Flange width x up to 5.75” thick3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
Guardrail Timber Clamp: SL-10GRH1. Attach to Guardrail timber 2. Fits Guardrail timbers 8” wide x 4” high3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
Rail Tie Drop-Thru Hanger1. Assembly drops through rail ties2. Fits minimum opening of 2.75”3. Lifting Eye for crane setup
Tie Support Mid Brace: SL-12TSB1. Braces from bottom of tie2. Adjusts 4” - 8”
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Hanger: SL-702RRH1. Support for 6” wide beam2. Double bolting below base
Concrete Rail Clamp: SL-35BRC11. Clamp to concrete railing2. 8” - 14” concrete width, with 8” fixed fascia standoff3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
SL-90ER24
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
RAILROAD SCAFFOLD SYSTEM
52
SL-10GRH SL-12RTSH
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
CABLE SCAFFOLD
53
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
WIRE ROPE INSTALLATION - CHOKER
WIRE ROPE INSTALLATION EQUIPMENT - BEAM PART # DESCRIPTION QTY
1 SP-12M Cable Anchor Beam Clamp (10”-24”) Exp. 22 SJ-34 Swivel Jaw, .75, 7200lb WLL 13 CM-10 Ratchet Load Binder - 20” Barrel 14 ML-34 3/4” Weldless Masterlink 15 Wire Rope, 6 X 19 IWRC; swaged one end 26 WS-34 Wedge Socket, 3/4” 17 CC-58 Cable Clamp, Saddle Style 3
WIRE ROPE INSTALLATION - BEAM
WIRE ROPE INSTALLATION EQUIPMENT - CHOKER PART # DESCRIPTION QTY
1 CS-3406 Cable Choker, .75” dia. X 6’ with swaging 22 CL-46 Screw Pin Shackle, 1” Pin, 8.5T 23 SL-092152 1.25” X 24” Galvanized Turnbuckle, Jaw & Eye 14 SJ-34 Swivel Jaw, .75 , 7200 lb WLL 15 Wire Rope, 6 X 19 IWRC; swaged one end 26 WS-58 Wedge Socket, 5/8” 17 CC-58 Cable Clamp, Saddle Style 3
7
All technical and engineering data,provided (including wire rope tensioning) at time of purchase.
ANCHORSPART NO. DESCRIPTION WT
CS-3406 3/4” Dia. x 6’ Cable Sling w/swaging 10SP-12M Cable Anchor Beam Clamp (10”-24” exp.) 40PCA-1B Single Barrel Anchor Clamp 40PCA-1BC Girder/Chord Cable Anchor Clamp 49PCA-2B Double Barrel Cable Anchor Clamp 55PCA-5B Half Barrel Cradle Cable Anchor Clamp 38
CABLE CLASS 6 X 19 I.W.R.C STEELSIZE BREAKING STRENGTH WT1/2” O 29,200 Lbs. .465/8” O 45,400 Lbs. .723/4” O 64,600 Lbs. 1.04TENSIONING EQUIPMENTPART NO. DESCRIPTION WTSL-17 2000# Cap. Winch w/30’ Wire Rope 32SL-516 4000# Cap. Winch w/60’ Wire Rope 61SL-532 8000# Cap. Winch w/30’ Wire Rope 77CM-10 Ratchet Load Binder - 20” Barrel 16STRESS MEASUREMENT EQUIPMENTPART NO. DESCRIPTION WTSL-750TM 7/16” - 3/4” Dia. Wire Rope Tensionmeter 14CABLE SCAFFOLD HANGERSPART NO. DESCRIPTION WTSL-49A 2 ea. 27” Base x 22” High Fixed Hanger 33SL-49CI 4 ea. Cable Roller Assembly, 2 w/Brake 27SL-59CI 4 ea. Heavy Duty Cable Roller Assembly 50SL-71A48* 4’ Galvanized Perforated Stem 8.5SL-71A72* 6’ Galvanized Perforated Stem 13SL-70C* 30” Horizontal Truss 18SL-70B* 48” Horizontal Truss 23SL-70L* Truss Board Lock 4.5SAFETY EQUIPMENTPART NO. DESCRIPTION WTSL-99K 6” - 24” Exp.; 2-man Safety Clamp 20SL-89RSL 12” - 24” Exp.; 2-man Rolling Beam Clamp 35MISCELLANEOUSPART NO. DESCRIPTION WTCR-100 SL-49CI Cable Roller Replacement .3CR-200 SL-59CI Cable Roller Replacement 3SL-49S Beam Flange Sag Clamp (to 16”) 17SL-49B 24” Stage Binder (for 2-24” Stages) 15CL-29 5/8” Alloy Shackle 1.5CL-46 1” Screw Pin Shackle 5WS-12 1/2” Open Wedge Socket 5WS-58 5/8” Open Wedge Socket 8WS-34 3/4” Open Wedge Socket 12K-10 9/32” - 3/4” Cable/Haven Grip 4CC-12 1/2” Cable Clamp .8CC-58 5/8” Cable Clamp 1CC-34 3/4” Cable Clamp 1.5
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
CABLE SCAFFOLD
54
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
OPEN WEDGE SOCKET
SL-49A HANGERSL-49CI HANGER
CABLE SCAFFOLD 4 FT. WIDE X 10 FT. LONGPART # DESCRIPTION QTY
1 SL-49CIF Cable Roller Insert without brakes 22 SL-49CIB Cable Roller Insert with brakes 23 SL-71A072 Vertical Stem, 1.75” Sq. x 72”; Perf. Pre-Galv. 44 SL-70B Truss, 48”, with Lever-Handle Bolt Locks 25 SL-D2410 Stage Aluminum, 24” X 10’; 2-Man 26 SL-84SA Stage Post Adaptor 47 SL-71B48M Perforated Steel Pre-Galv Guardrail Post 48 SL-10AL Aluminum Guardrail; 1.5” Sq. X 10’ 49 SL-05AL Aluminum Guardrail; 1.5” Sq. X 5’ 410 SL-84GRL Guardrail Lock J-Bolt for 1.5” Sq. 811 SL-70L Truss Board Lock
When the project demands speed and flexibility, this is the system to use. Ideal for spot-work at many locations of the bridge. We pro-vide all engineering data, including wire rope tensioning.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
CABLE SCAFFOLD
55
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
CABLE SCAFFOLD 4 FT. WIDE X 32 FT. LONGPART # DESCRIPTION QTY
1 SL-DX2432 Stage Aluminum 24” X 32’ 3-Man 22 SL-84SA Stage Post Adapter 103 SL-71B48M Guardrail Post, Perforated w/Locks 104 SL-16AL 16’ Aluminum Guardrail 85 SL-84GRC Guardrail Connector 46 SL-GR0540 54” Endrail 47 SL-84GRL Guardrail Lock J-Bolt for 1.5” Stem 88 SL-BM650X0105 Beam Aluminum 6.5” X 10.5’ w/Nailer 69 SLP-702TSB4 Truss Hanger Support 610 SL-71A072 Vertical Stem, 1.75” Sq. X 72” 611 SL-49CI-F Cable Roller Insert No Brake 312 SL-49CI-B Cable Roller Insert w/Brake 313 SL-70L4 Aluminum Beam Board Lock 6
Note: 4 Stems, 2 Horizontal Truss and 2 Truss Board Locks needed for 1 working deck when used with SL-49CI. 4 Board Locks with 48” Truss.
For Aluminum Stages , Guardrails, Posts and accessories see Pages 66-68.
LADDER CLAMPSMODEL DESCRIPTION WT
SL-64A Pipe Ladder Clamp 35SL-64C I-Beam Ladder Clamp 35SL-64D Side-Mounted Ladder Clamp 25SL-64LC Parapet Ladder Clamp 45SL-64SA Side-Mounted Ladder Clamp (Pipe Rail) Static 48SL-64SB Side Mounted Ladder Clamp (Concrete Rail) Mobile 84
Swing-Lo Ladder Clamps provide a safe and secure access. They support standard ladder rungs and adjust for various beams and parapets.
Ladder NOT included with any Ladder Clamp
SL-64LC
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
ACCESS EQUIPMENT
56
SL-64C SL-64SB
SL-64C SL-64A
SL-64D SL-64LC
SL-64SA
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Static Cable Lines provide an easy snap on connection for workmen’s safety belts. Temporary Perimeter Guardrail Assembly was designed to meet safety requirements for open erected steel girders where a temporary guardrail system is required. It eliminates the welding and removal operation.
SL-99P215
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
Prestressed Concrete I-Beam Steel I-Beam Steel H-Beam
FALL PROTECTION
FALL PROTECTIONPARAPET CLAMPS
FALL PROTECTIONBEAM CLAMPS
57
SL-090BSC1
SL-99B2 SL-99Z SL-99P4
SL-99P1
SL-99PSAC
↑
The Mobile Fall Protection Parapet Clamps are designed for two workers. Attach a retractable life line, and the system is complete.
Retractable life line here
END VIEW
END VIEW
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING PARAPET GUARDRAIL SYSTEMMODEL DESCRIPTION QTY
1 SL-99PGRS One set of 3 Rolling Guardrail Brackets 8’ apart w/ SL-35D Safetyrail Locks for top and mid rail
3
2 SL-99PGSS One set of 3 Stationary Guardrail Brackets 8’ apart w/ SL-35D Safetyrail Locks for top and mid rail
3
The Swing-Lo Rolling Rail Fall Protection System meets the Occupational, Safety, and Health Administration’s (OSHA) standards for fall protection. Designed for the Railroad Industry, the system provides protection for the worker covering a specified area. Expand the protected area by adding more roller stanchions and guardrails. The standard system covers sixteen linear feet.
When bridge parapets or guardrails do not meet the Occupational, Safety, and Health Administration’s (OSHA) standards for fall protection, Swing-Lo’s Rolling Parapet Guardrail System provides a mobile and adjustable answer. Sold in sets of three rollers with adjustable vertical post and locks for two by four wood rails, the system meets OSHA standards. The system may be purchased with or without rollers. The stationary brackets are easily convertible to a rolling system by adding rollers. The brackets are spaced eight feet apart. The rolling brackets allow the worker to work within the area covered by the brackets. Extend the work area by adding more rolling brackets and wood rails.
MOBILE TRAIN RAIL GUARDRAIL SYSTEMMODEL DESCRIPTION
SL-RTC18RIS One set of 3 Rolling Stanchions 8’ apart w/ top and mid-rails; 16’ long
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE PARAPET GUARDRAIL
MOBILE TRAIN RAIL GUARDRAIL
58
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Guardrail Posts and Grating Clamps for hazardous walk and working areas
PERIMETER GUARD RAIL POSTSMODEL DESCRIPTION WT
SL-G080PPC Corner Grid Post 18SL-G080PP Grid Post 15
The SL-G080PP and SL-G080PPC Guardrail Posts are secured by T-Bolt Locks to metal gratings. Guardrails and Toeboards are then attached to provide an entire Guardrail System that keeps hazardous areas in contain-ment and work crews safe.
SL-G080PPC SL-G080PP
Static Cable Lines provide an easy snap on connection for workmen’s safety belts. Temporary Perimeter Guardrail Assembly was designed to meet safety requirements for open erected steel girders where a temporary guardrail system is required. It eliminates the welding and removal operation.
GUARD RAIL POSTSMODEL DESCRIPTION WT
SL-0906P Static Line Post w/Eye Bolt 12SL-71B48M Pre-galvanized /w Toeboard Clips & Locks 9GUARD RAIL CLAMPSSL-71B48G Beam Flange Clamp ( Open Beam ) 12SL-090BSC Beam Static Line Clamp w/SL-0906P Post 18SL-99B2 Dual Static Line Fall Protection H-Beam Clamp 35ACCESSORIESSL-091074 J-Hook for Wire Rope Rail 1SL-35C Safety Rail Bracket ( 2x4 wood rail ) 2SL-84GRL Guard Rail Lock for Aluminum Rail 1TB01 T-Bolt 3/4” 1HNC8 Handle Lock for 3/4” Threaded Rod 1SL-35D Threaded Bolt Stock Guardrail Lock
for 2” X 4” Wood Guardrail1
SL-71B48G
SL-091074
SL-35C
SL-84GRL
HN08
TB01
SL-0906BSC
SL-99B2
SL-35D
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
PERIMETER GUARDRAIL
STATIC LINE GUARDRAIL
59
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING I-BEAM CLAMP SERIESMODEL SWL (LBS) EXPANSION JAW WT
SL-54A 1000 5” - 18” 2 3/4” 14
SL-54B 1000 5” - 18” 6” 15
SL-54BA 1000 4” - 9” 6” 14
SL-54CR3 1000 3” 1/2” 12
SL-54F 1000 5” - 18” 3 1/2” 19
SL-54HE 1000 5” - 18” 6 1/2” 27
SL-54DSM 2000 9” - 24” 3 1/2” 48
SL-54F2 2000 6” - 18” 2 1/2” 29
SL-54HB 2000 7” - 18” 8” 24
SL-54X 4000 5 1/2” - 12” 1 1/2” 30
SL-54XM3 4000 4” - 8” 1 1/2” 25
SL-54ZA4 4000 28” - 44” 3 3/16” 55
SL-54Z 8000 12” - 18” 3” 50
SL-54F
SL-54A
SL-54X
SL-54HB
SL-54Z
SL-54XM3SL-54DSM
SL-54HE
SL-54CR3SL-54ZA4
SL-BCR48BSL-72C
6 1/2”
1/2”
SL-72R6
SL-72J3
SL-BCR48A
ROLLING ANGLE CLAMP SERIESMODEL SWL
(LBS)EXPANSION ANGLE THICK-
NESSWT
HORZ LEG VERT LEG
SL-72R 1000 3 .5” 1” 15
SL-72R6 1000 2.5” - 6.5” 1/2” 29
SL-72J3 1000 3” - 4.5” 1/4” 24
SL-BCR48A 1000 8” - 19” 1” - 2” H-BEAM 40
SL-72C 1000 4” - 6” 3/8” - 1” 32
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
MOBILE ANGLE CLAMPS
MOBILE I-BEAM CLAMPS
60
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-54CE
SL-55AHD
SL-54DS44
SL-54DS5
SL-77
SL-54E
SL-54DT
SL-44C
SL-54HS10
SL-54CC
STATIONARY I-BEAM CLAMP SERIESMODEL SWL (LBS) EXPANSION JAW WT
SL-44A 1000 6” - 18” 2 1/2” 10
SL-44C 1000 6” - 18” 3 1/2” 14
SL-54BBC 1000 6” - 24” 25 1/2” 30
SL-54C 1000 5” - 18” 3 3/8” 16
SL-54CE 1000 5” - 20” 6 7/8” 28
SL-54HS10 1000 8” - 20” 10” 32
SL-77 1000 - - 10
SL-54CC 2000 5.25” - 21” 3” 27
SL-54DT 2000 5.25” - 28” 3 1/2” 32
SL-54E 2000 6” - 14” 3 3/8” 11
SL-54DS44 2000 20” - 44” 3 1/2” 50
SL-54DS5 5000 12” - 18” 2” 40
SL-55AHD 10000 16” - 44” 4 1/2” 47
STATIONARY ADJUSTABLE SCREW CLAMPMODEL SWL
(LBS)EXPANSION
WTA B C D E
SL-54EB 2000 6” - 14” 25” 9” 1 3/8” 6 3/8” 17
SL-1254SC 4000 5” - 12” 17 1/2” 9 1/2” 1 3/8” 10” 17
SL-1254SCA* 1500 6” - 12” 20 1/2” 7” 1 1/2” 10” 33
SL-99M30 2000 10” - 30” 36” 22” 4” 8” 55
SL-1114SC 7500 11” - 14” 33” 9” 2 3/4” 11 3/4” 44
SL-1518SC 7500 15” - 18” 33” 11” 2 3/4” 11 3/4” 46
SL-1254SC
SL-1254SCA*
* Screw Clamp for angled runs
SL-99M30
SL-1518SC
MODEL SL-54EB
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
SCREW TYPE I-BEAM CLAMPS
STATIONARY I-BEAM CLAMPS
61
SL-54BBC
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SCISSOR I-BEAM CLAMP MODELS... with WheelsMODEL RATED LOAD EXPANSION A B C WT
BHD #66 1000 Lbs. 6” - 10” 3 1/4” 19 1/2” 4 14
MHD #66 1000 Lbs. 9” - 16” 3 1/4” 19 1/2” 4 15
KHD #66 1000 Lbs. 10” - 18” 3 1/4” 19 1/2” 4 16
SHD #66 1000 Lbs. 14” - 24” 5” 24 1/2” 4 22
“C” MODEL SCISSOR I-BEAM CLAMP... with WheelsMODEL RATED LOAD EXPANSION A B C WT
CBHD #66 1000 Lbs. 6” - 10” 3 1/4” 19 1/2” 13
CMHD #66 1000 Lbs. 9” - 16” 3 1/4” 19 1/2” 14
CKHD #66 1000 Lbs. 10” - 18” 3 1/4” 19 1/2” 15
CSHD #66 1000 Lbs. 14” - 24” 5” 24 1/2” 21
SWEETHEART CLAW CLAMPRATED LOAD STRAP THICKNESS A B
SIZE C D E H WTMODELSP-04
2 TON 1/4” 3/4” 4”6 7/8” 9 1/4” 1/2” 7 7/8” 4 1/2
MODELSP-05
3 TON 1/4” 3/4” 5”8” 10 3/8” 1/2” 8 7/8” 7
MODELSP-06
5 TON 3/8” 3/4” 6”11” 14 3/4” 3/4” 12 1/4” 15 1/2
MODELSP-08
8 TON 3/8” 1” 8”14” 17 1/2” 1” 14 1/2” 22 1/2
MODELSP-10
10 TON 1/2” 2” 10”18” 23” 1 3/8” 19” 42
MODELSP-12
15TON 1/2” 2” 12”22” 28 1/8” 1 1/2” 23 1/8” 67
HEAVY DUTY I-BEAM CLAMPSRATED LOAD STRAP THICKNESS A B
SIZE C D E H WTMODELBGC-16
EX. 16 TON 3/4” 2” 13”21” 12 1/2” 2” 11” 110
Lifting • Holding • Positioning
STATIONARY ANGLE CLAMP SERIESMODEL SWL
(LBS)EXPANSION ANGLE
THICKNESSWT
HORZ LEG VERT LEG
SL-72 1000 3 1/4” 3/8” 14
SL-72A4 4000 4” 1/2” 20
SL-72B2 1000 4” - 12” 1 3/8” 11
SL-72 SL-72B2SL-72A4
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
STATIONARY ANGLE CLAMPS
HEAVY DUTY I-BEAM CLAMPS
SCISSOR I-BEAM CLAMPS
62
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
VERTICAL STEMS - Double lock (2000 lb. SWL)SL-71AA48 48” 1 3/4” Sq 10SL-71AA60 60” 1 3/4” Sq 12SL-71AA72 72” 1 3/4” Sq 14SL-71C48 48” 2” Sq. 10SL-71C60 60” 2” Sq. 12SL-71C72 72” 2” Sq. 14SL-71C96 96” 2” Sq. 16
TRUSS - MODEL SL-70 WITH BOLT LOCKSMODEL LENGTH SIZE WT(LB)
SL-70C 30” 2” X 3” 18
SL-70B 48” 2” X 3” 23
SL-70A 72” 2” X 3” 29
* Safety Swivel Hook Connector not included in price of stem
Single lock
Double lock
VERTICAL STEMS - Single lock (1000 lb. SWL)MODEL LENGTH SIZES WT
SL-71A32 32” 1 3/4” Sq. 7SL-71A48 48” 1 3/4” Sq 9SL-71A60 60” 1 3/4” Sq 11SL-71A72 72” 1 3/4” Sq 13
PERFORATED 1” ON CENTER PRE-GALVANIZED
SL-650TCD
SL-BM650X12
SL-70B
TRUSS - MODEL SL-BM650X ALUMINUM BEAMMODEL LENGTH DEPTH WT(LB)
SL-BM650X SPECIFY 6 1/2” 3.2/Ft
SL-650TCD* SPECIFY 6 1/2” +12
TRUSS - MODEL SL-BM750X ALUMINUM BEAMMODEL LENGTH DEPTH WT(LB)
SL-BM750X SPECIFY 7 1/2” 5.2/Ft.
SL-706X24
* Add 12 lbs to the total weight of aluminum beam for Model SL-650TCD
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
ALUMINUM SUPPORT BEAMS
STEEL SUPPORT TRUSSES
VERTICAL STEMS
63
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
HANGER MODELS FOR STAGES
MODEL
BASE (INCH)
HEIGHT (INCH)
SWL (LBS)
WT
HD-801 28.5 28 1000 16CHD-140 28.5 24 - 36 1000 30
CHD-101 28.5 24 - 52 1000 31HANGER MODELS FOR NEEDLE BEAMS... (USED WITH 1 3/4” SQ VERTICAL STEMS)
SLP-702A 4.75 3.25 1000 6SLP-702CHDA 4.75 3.25 2000 7HANGER MODELS FOR NEEDLE BEAMS... (USED WITH 2” SQ VERTICAL STEMS)
SLP-702C 4.38 3.50 1000 9SLP-702CHDC 4.38 3.50 2000 12HANGER MODELS FOR ALUM STRINGER (USED WITH 1 3/4” SQ VERT. STEMS)
SLP-702TS 5.25 13.75 2000 15SLP-702TSA 4.25 4.75 2000 10HANGER MODELS FOR ALUM STRONGBACKS (USED WITH 2” SQ VERT. STEMS)
SLP-702TSB4 5.25 4 2000 8SLP-702HDB 4.69 (HD ALUMINUM STRINGER) 2000 10SLP-702TSB4A 5.25 (HD ALUMINUM STRINGER) 2000 8SLP-702TSA1 4 9/16” (HD ALUMINUM STRINGER) 1000 8SLP-702TSB1 5.25 20.75 2000 17SLP-702TSB2 5.25 25.75 2000 18SLP-702TSB3 5.25 13.75 2000 12SLP-71CX04 5.25 20.75 4000 20SLP-71CX12 4 1/4 20.75 12000 22HANGER MODELS FOR ALUM STRONGBACKS (USED WITH 2 1/4” SQ VERT. STEMS)
SLP-702TSB 5.25 13.75 2000 17SLP-702TSC 5.25 (ALUMINUM BEAM) 1000 9
CHD-140
SLP-702CHDA
SLP-702A
SL-702TS
HD-801
CHD-101
SLP-702HDB SLP-702TSA1 SLP-702TSB4
SLP-702TSB4A
SL-70ADA SLP-702TSB2 SLP-71CX12SLP-702TSB1
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
HANGERS
64
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
CONNECTORSMODEL DESCRIPTION WT
SL-65A Scissor Connector 3
SL-65B Pigtail Connector 3
SL-65C Safety Swivel Hook Connector 6
SL-65CHD Heavy Duty Safety Swivel Hook Connector (1.75”) 6
SL-65CHD2 Heavy Duty Safety Swivel Hook Connector (2.0”) 3
SL-65CHD20 HD Stem-Clampm Connector 12
SL-65D Union Connector 4
SL-65E Vertical Stem Connector (for 1 3/4”) 1.5
SL-65ESP HD Vertical Stem Connector (for 2”) 3
SL-65F Truss to Vertical Stem Connector 7
SL-65H Vertical Stem Connector (for 1 3/4”) 2
SL-15CS Stem to Truss Connector (for 2” Sq. Stem) 6
SL-70TCD Aluminum Beam Truss Connector 5
ACCESSORIESSL-35A Safety Rail Bracket (for CHD-140 Stirrup) 1.5
SL-35C Safety Rail Bracket (for Stem & CHD-101 Hanger) 1.5
SL-35D Safety Rail J-Lock (for 2” X 4” wood rail) .5
CL-29 5/8” Alloy Shackle 1.5
CL-16 Twisted Clevis (for all 1k & 2k Beam Clamps) 1
CP-7 1/2” X 2-1/2” Clevis Pin (Included with CL-16 Twisted Clevis) 0.1
SL-70L Stage Lock (for Aluminum Stage) 4.5
SL-70L4 Aluminum Beam and Stage Lock 5
SL-17 2K Winch W/30’ Cable 32
SL-516 4K Winch W/60’ Cable 61
W-20D 1.1K Winch W/130’ Cable (drum type) 56
W-50 1.5 Chain Hoist W/5’ lift 19
ECO21-S* Quick Release Lock Pin (7/16” X 3”) 0.1
SL-22 Gravity Lock Pin (for Scissor model) 0.1
SL-13 Handle Bolt Lock (for “C” Scissor model) 0.1
SL-13B Handle Bolt Lock (for Horizontal Truss) 0.1
SL-13C Handle Bolt Lock (for Vertical Stem) 0.1
W-30T 1.1K Winch W/100’ Cable (Traction type) 40
SL-24 Wheel Brake (Scissor model) 3.5
SL-24A Wheel Brake (SL-54A model) 2.5
SL-140C Board Lock (CHD-140 & 101) 2.5
WHEELS MODEL DIA. FACE SHAFT TYPE USED ONSL-19 1.50 1.75 .75 Aluminum SL-54A & BSL-20 2.00 2.00 .75 Steel/Bearings ScissorsSL-21 3.25 2.00 .75 Phenolic SL-54F, H, K, XSL-23 2.375 1.75 1 Steel/Bearings SL-99ZSL-25 2.375 2.00 1 Steel/Bearings SHD & CSHD ScissorsSL-26 3.25 4 .75 Phenolic Parapet series & SL-54GSL-27 8.00 2.00 .75 Phenolic SL-15LASSL-29 2.00 1.375 .75 Steel/Bearings SL-54XM3SL-34 6.00 2.00 .75 Phenolic SL-25U, PSC72ANSL-097013 6.00 2.19 .75 Soft Rubber SL-80DHV2SL-0970195 10.00 3.00 .75 Pneumatic SL-80DHV2
SL-0970195SL-097013
SL-23
SL-29SL-27
SL-34
SL-26
SL-21
* These pins are available in various sizes.
SL-19
*
SL-70TCD
SL-65CHD20
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
WHEELS
CONNECTORS & ACCESSORIES
SL-35D
65
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
GUARDRAILS & ACCESSORIES
SL-84GRC SL-84GRL SL-84SA
SL-24ERLSL-15ER
SL-15ERL6
SL-15GRP
SL-AL SERIES GUARDRAILS
SL-71B48M
GUARDRAILS - ALUMINUM, SQUARE TUBEMODEL LENGTH TUBE SIZE WT
SL-06AL 6’ 1 1/2” sq. 3SL-08AL 8’ 1 1/2” sq. 4SL-10AL 10’ 1 1/2 sq. 5SL-12 AL 12’ 1 1/2 sq. 6SL-14AL 14’ 1 1/2 sq. 7SL-16AL 16’ 1 1/2 sq. 8SL-18AL 18’ 1 1/2 sq. 9SL-20AL 20’ 1 1/2 sq. 10GUARDRAIL POSTSMODEL DESCRIPTION WTSL-15GRP Aluminum w/Toeboard Clips and Locks 3SL-71B48M Galv. Perforated Sq. Tube w/Toeboard Clips
& Locks9
SL-71B48GW Galv. Perforated Sq. Tube w/Toeboard Clips & Locks (FOR 2X4)
9
GUARDRAIL ACCESSORIESSL-15ER 24” Al. Endrail (1) w/Corner Connectors (2) 2SL-24ERL 24” Al. Endrail (1) w/Corners (2) & Stem Con-
nector (1) 3
SL-48ER 48” Al. Endrail (1) w/ Corner Connectors (2) 5
SL-84SA Stage Guardrail Post Adapter 3SL-15EREC Endrail Corner Connector 2SL-84GRC Guardrail Connector 1SL-84GRL Guardrail Locks .25SL-15ERL6 Endrail Vertical Stem Connector 4SL-35D Threaded Bolt Stock Guardrail Lock
for 2” X 4” Wood Guardrail1
TOE BOARD CLAMPSMODEL DESCRIPTION WT
SL-080TB REG. TOE BOARD (ALUM STAGE) 2
SL-B80TB BOLT STOCK TOE BOARD CLAMP 1
SL-E80TB END TOE BOARD CLAMP 2
SL-S80TB SPIKE TOE BOARD CLAMP FOR WOOD DECKS 2
SL-080TB SL-B80TB SL-E80TB SL-S80TB
TOEBOARD CLAMPS
Plywood deck application Aluminum Stage application
SL-S80TB SL-080TB
SL-15EREC
SL-71B48GWSL-35D
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-889766
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ALUMINUM STAGES
Use aluminum beams as the main support structure, add OSHA compliant Scaffold Planks, and finish with 3/4” plywood as an alternative to aluminum stages.
7 4 SL-D2408 24 SL-D2808 31
12 4 SL-D2412 34 SL-D2812 47
16 5 SL-D2416 43 SL-D2816 69
20 6 SL-D2420 60 SL-D2820 91
24 6 SL-D2424 72 SL-D2824 109
28 6 HD SL-D2428 84 SL-D2828 145
32 6 HD SL-D2432 145 SL-D2832 166
34 6.5 SL-D2434 233 SL-D2834 251
36 6.5 SL-D2436 248 SL-D2836 267
38 6.5 SL-D2438 262 SL-D2838 282
40 6.5 SL-D2440 276 SL-D2840 297
Rail 24” Wide 28” Wide
Lenght Depth MODEL Wght MODEL Wght(Ft.) (In.) NO. (Lbs.) NO. (Lbs.)
ALUMINUM STAGE - TWO-MAN - 500 LB SWL
8 5 SL-DX2408 42 SL-DX2808 45
12 5 SL-DX2412 65 SL-DX2812 70
16 6 SL-DX2416 85 SL-DX2816 100
20 6 HD SL-DX2420 120 SL-DX2820 125
24 6 HD SL-DX2424 145 SL-DX2824 155
28 6 HD SL-DX2428 200 SL-DX2828 220
32 6 HD SL-DX2432 230 SL-DX2832 250
34 7 SL-DX2434 280 SL-DX2834 298
36 7 SL-DX2436 288 SL-DX2836 317
38 7 SL-DX2438 315 SL-DX2838 335
40 7 SL-DX2440 332 SL-DX2840 353
Rail 24” Wide 28” Wide
Lenght Depth MODEL Wght MODEL Wght(Ft.) (In.) NO. (Lbs.) NO. (Lbs.)
ALUMINUM STAGE - THREE MAN - 750 LB SWL
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
OSHA COMPLIANT SCAFFOLD PLANK - 2” X 10’ X 12’
Use the aluminum Beam as support member for the suspended scaffold. The standard 6.5” beam is used in most cases. The 7.5” beam is used in cases where more capacity is needed. The aluminum beam contain a 2” sq. plastic nailer strip which provides nail gripping properties. Weather is no problem because the nailer is durable, and will withstand repeated use. Specify the lenght of your beam, and then match it to the hanger of your choice on page 64.
Clips are used to lock beams together when they intersect as shown.
ALUMINUM SUPPORT BEAMS
SCAFFOLD-GRADE PLANK
67
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
ALUMINUM GUARDRAIL PER SIDE (TOP & MID)
MODEL GUARDRAIL NUMBER OF NUMBER Wght
NO. LENGHT GR CONN. OF POSTS (Lbs.)
SL-GR07 7 0 2 31
SL-GR08 8 0 2 32
SL-GR12 12 0 3 48
SL-GR16 16 0 3 52
SL-GR20 20 0 4 68
SL-GR24 24 2 4 74
SL-GR28 28 2 5 90
SL-GR32 32 2 5 94
SL-GR34 34 2 6 108
SL-GR36 36 2 6 110
SL-GR38 38 2 6 112
SL-GR40 40 2 6 114
Each guardrail post is equipped with a toeboard bolt lock (SL-080TB). The customer may rip plywood (5/8” or 3/4” x 4”) for toeboard where required.
ALUMINUM ENDRAIL PER SIDE (TOP & MID)
Each end of a platform using aluminum stage(s) requires endrails (top & mid). To determine endrail size, add six inches to the width of your aluminum platform (the lenght of your endrail), double your quantity (for top & midrail), then add four each SL-84GRL3 Endrail Bolt-Type Locks per side, as shown here. For example, for a 4 Ft. wide platform, the require endrails will be:
4 ea. 1.5” Sq. X 54” Alumuinum Endrail8 ea. SL-84GRL3 Endrail Bolt-Type Lock
Where wood (2” X 4”) is used as guardrails, use SL-35D Safetyrail Bracket.
Where aluminum (1.5” Sq.) is used as guardrails, use SL-84GRL3 bolt-type guard-rail lock.
The choice is given to the customer to use the following fixed endrail models with the Corner Connectors, instead of the flexible endrail using the SL-84GRL3 bolt-type lock illustrated above:
SL-15ER SL-15EREC
SL-84GRC GUARDRAIL CONNECTOR
GUARDRAIL(TOP)
SL-15EREND RAIL
(TOP)
SL-84SA STAGE ADAPTER
SL-B80TB TOEBOARD CLAMP
SL-84GRLGUARDRAIL LOCK
GUARDRAIL POST
GUARDRAIL(MID)
SL-15EREND RAIL
(MID)
GUARDRAILS & POST ACCESSORIESMODEL DESCRIPTION WT QTY
SL-15GR Guardrail .50/ft. *SL-84GRC Guardrail Connector 1 *SL-84SA Stage Adapter 3 *SL-71B48M Guardrail Post, Toeboard, & Locks 9 *
SL-84GRC SL-84GRL SL-84SA
68
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
I GENERAL GUIDELINES
A. POST THESE SAFETY GUIDELINES in a conspicuous place and be sure that all persons who erect, use, locate, or dismantle suspended scaffold systems are fully aware of them and also use them in tool box safety meetings. B. FOLLOW ALL SWING-LO SUSPENDED SCAFFOLD RECOMMENDATIONS including safe loading capacities of each suspended scaffold component, as well as all State, Local and Federal codes, ordinances, and regulations relating to suspended scaffolding. C. SURVEY THE JOBSITE. A survey shall be made of the jobsite by a competent person for hazards such as Electrical Power Lines. All hazardous or potential hazardous conditions should be corrected before erecting or using suspended scaffold systems. D. INSPECT ALL EQUIPMENT BEFORE EACH USE. Never use any equipment that is dam- aged or defective in any way. Mark it or tag it as damaged or defective equipment and remove it from the jobsite. E. CARE SHOULD BE USED IN DISTRIBUTING LOADS EVENLY. Recommended distri- buted work load must not be exceeded. F. DO NOT ERECT, DISMANTLE OR ALTER THE SUSPENDED SCAFFOLD unless under the supervision of a competent person. The scaffold must be erected PLUMB and LEVEL. G. DO NOT ABUSE OR MISUSE SUSPENDED SCAFFOLD EQUIPMENT such as hitting with a hammer or a heavy object. Never overload platforms. H. ERECTED SUSPENDED SCAFFOLDS SHOULD BE CONTINUOUSLY INSPECTED by the user to ensure the scaffolds are maintained in a safe condition. Scaffold should be inspected prior to each day’s use. Report any unsafe condition to your supervisor. I. NEVER TAKE CHANCES! IF IN DOUBT REGARDING THE SAFETY OR USE OF THE SCAFFOLD, CONSULT THE SUPPLIER/MANUFACTURER. J. NEVER USE SUSPENDED SCAFFOLD EQUIPMENT FOR PURPOSES OR IN WAYS FOR WHICH IT WAS NOT INTENDED. Do not modify or alter any component without express writ- ten permission from Swing-Lo Suspended Scaffold Company. K. CARE SHOULD BE TAKEN WHEN OPERATING EQUIPMENT DURING WINDY CONDITIONS. L. USE APPROPRIATE DECKING MATERIAL, such as 4” X 6” Southern Pine, Douglas Fir, or alu- minum beam, OSHA compliant scaffold plank, and 3/4” plywood (when using wood deck), or standard alumi- num scaffold stage. M. THE SCAFFOLD DECK SHOULD HAVE A MINIMUM OVERHANG OF 18” BEYOND THE END SUPPORTS. N. DO NOT WORK ON SUSPENDED SCAFFOLD if your physical condition is such that you feel dizzy or unsteady in any way. O. DO NOT WORK UNDER THE INFLUENCE of alcohol or illegal drugs.
II GUIDELINES FOR USE OF SWING-LO SUSPENDED SCAFFOLD SYSTEMS
A. WEAR FALL PREVENTION EQUIPMENT when erecting and using suspended scaffold. Fall prevention equipment must be independent of the suspended scaffold, AND the anchorage point must be capable of holding a minimum of 5000 pounds per person attached. B. VERIFY THE STRUCTURE WILL SUPPORT the suspended loads with a safety factor of 4.
Adapted from: Scaffod & Access Industry Association (SAIA) The Scaffold, Shoring & Forming Institute (SSFI)
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
CODE OF SAFE PRACTICES
69
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Visually inspect all rollers/wheels are secure and in proper alignment Visually inspect all Expansion Bars ensuring they are straight, and no bending has occurred
Inspect Vertical Stems and ensure they are plumb and level. Check that all bolts/pins on connections are in place and secure Ensure all horizontal braces are in place and properly secured (bolt and pins in place and secured)
Ensure all deck planks are in good order and properly secured (bolts and pins in place and secure)
Ensure all stage brackets are in place and properly secured (bolts and pins in place and secure)
Inspect all guardrails and posts to ensure all brackets are in place and secured (bolts and pins in place and secure)
Deficiencies Noted and Corrective Action Taken:
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________ ____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
Location____________________________________________________Time_____________________
Date____________________________________Inspected by__________________________________
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897
SUSPENDED SCAFFOLD DAILY INSPECTION CHECKLIST
70
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Customer Service: 866-764-8989 Tel: (269) 764-8989 Fax: (269) 764-8897 71
INDEXAAccess Equipment........................................................................56Angle Clamps, Mobile...................................................................60Angle Clamps, Stationary..............................................................62Aluminum Support Trusses...........................................................63Aluminum Beams .........................................................................67Application Photographs............................................................5-12Aluminum Guardrails....................................................................66Aluminum Stages.........................................................................67
Barrier Mobile Scaffold..................................................................48Bascule Bridge Scaffold................................................................14Beam Clamp and Hanger Mobile Scaffold.....................................18Beam Clamp and Hanger Stationary Scaffold...............................30Beam Clamps, Mobile....................................................................60Beam Clamps, Mobile Scissors.....................................................62Beam Clamps, Stationary..............................................................61Beam Clamps, Stationary Heavy Duty..........................................62Beam Clamps, Stationary Screw Type..........................................61Beam Clamp and Truss Mobile Scaffold........................................18Beam Clamp and Truss Stationary Scaffold..................................30Between Girder Concrete Beam Top Flange................................26Between Girder Steel Beam Flange Scaffold...............................26Box Chord Cantilever Scaffold.....................................................36Box Chord Single, Double, and Center Scaffold..........................36Box Chord to Parapet Scaffold..................................................35Box Chord Top Scaffold................................................................35By-Pass Scaffold System........................................................21-23
Cable Scaffold...............................................................................53Cable Scaffold Components..........................................................54Cable Scaffold Packaged Platforms..............................................55Cable Installation (Choker & Beam) Applications.........................53Cart Stripping Scaffold..................................................................28Code of Safe Practices.................................................................69Connectors & Accessories............................................................65Counter-Weight Cart Scaffold.......................................................49
Daily Inspection Checklist..............................................................70Drop-Through Scaffold...................................................................25
Fall Protection Static Line..............................................................57Fall Protection Beam Clamps........................................................57Fall Protection Prestressed Concrete Beam Clamp......................57Fall Protection Concrete Parapet Clamp.......................................57
Elavated Rail Scaffold....................................................................37 Extended Girder Scaffold...............................................................38
B
C
D
E
F
GGirder-Edge Mobile Scaffold............................................................50Grid Scaffold (“Dance Floor”)..........................................................29Guardrail, and Accessories........................................................66,68Guardrail, Parapet Rolling System..................................................58Guardrail, Train Rail Rolling System................................................58Guardrail, Perimeter System...........................................................59 Guardrail, Static Line System..........................................................59
Hangers.........................................................................................64H-Beam Chord Scaffold.................................................................34H-Beam Column Clamp.................................................................38H-Beam Pile Scaffold.....................................................................38Help................................................................................................4
H
L
Saddle Beam Scaffold....................................................................37Scissors Scaffold Systems.............................................................16Single Side Beam Scaffold..............................................................37Spreader Mobile Scaffold...............................................................25Stems.............................................................................................63Stripping Cart Scaffold...................................................................28Stripping Suspended Scaffold........................................................27
Railroad Scaffold System................................................................51Rig Scaffold Systems......................................................................15Rail Scaffold (Subway Painting Cart).............................................50
S
PParapet Dimensions & Considerations...........................................40Parapet Rail Types.........................................................................39Parapet Scaffold Components........................................................41Parapet Scaffold Single Platform....................................................42Parapet Scaffold Double Platform (2 Ft. & 2 Ft.)............................42Parapet Scaffold Double Platform (2 Ft. & 4 Ft.)............................43Parapet Scaffold Expanded............................................................45Parapet Scaffold Extended............................................................44Parapet Scaffold Stationary “Cat-Walk”..........................................43Parapet Scaffold Stationary Heavy Duty.........................................46Parapet Scaffold Wrap-Around.......................................................44Parapet Scaffold Expanded Wrap-Around......................................45Parapet Scaffold Wrap Around & Connecting By-Pass Scaffold....47Permanent Suspended Scaffold Application...................................13Pier Beam Scaffold..........................................................................34Pier Cap Scaffold............................................................................33Prestressed Concrete Beam Clamps........................................19-20
R
Ladder Clamps...............................................................................56
MMedian Barrier Scaffold..................................................................48Multi-Level Scaffold........................................................................24
TTank Scaffold Mobile.......................................................................32Tank Scaffold Stationary..................................................................32Thru-Girder Wrap-Around Mobile Scaffold.....................................51Traveller Mobile Scaffold.................................................................25Trusses Steel..................................................................................63
Waler Beam Clamp Scaffold...........................................................31Waler Fascia Beam Scaffold...........................................................31Wheels............................................................................................65Winch Frame Hanger Scaffold........................................................17
W
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
OOpen Deck Cantilever Platform.......................................................51Our Heritage....................................................................................4
All products and applications depicted in this catalog are for illustration purposes only. Ultimately, only Swing-Lo technicians, engineers, or the client’s engineer must provide final approval for the specific application of Swing-Lo Products. We are not responsible for any typographical errors.
VER21JA
Swing-Lo Suspended Scaffold Company PO Box 128 Covert Michigan 49043 Designers, Engineers & Manufacturers Special Overhead Scaffolding SINCE 1955 Customer Service: (866) 764-8989 Office: (269) 764-8989 FX (269) 764-8897 www.swing-lo.com E-mail: info@swing-lo.com●
Our Products are only the beginning. Swing-Lo Suspended Scaffold is a one-stop destination for your suspended scaffolding. A company where safety is paramount, we pride ourselves on our over fifty-five year history of supplying safe and durable suspended scaffolding worldwide. Contact us or visit us online to discover all the ways our design and engineering professionals can help you find solutions to your access problems.
● ● ●
Recommended