View
220
Download
0
Category
Preview:
Citation preview
Sound Absorbers
Susturucular
7.BSAB.2
DIKDÖRTGEN SUSTURUCU (BSAB)RECTANGULAR SOUND ABSORBER
Model:
Malzeme:
Kullaným:
Montaj
Siparis Kodu:
*BSAB100 : Kulis kalýnlýðý 100 mm olan dikdörtgen susturucu.*BSAB200 : Kulis kalýnlýðý 200 mm olan dikdörtgen susturucu.
Ürün kasasý boyutuna göre 0,8 mm ile 1,5 mm arasý galvanizli sacdan, kulisleri ise boyutuna 0,7 mm ile 1 mm arasý galvanizli sacdan imal edildikten sonra hazýr flanþ ve flanþ köþe parçalarý monte edilmektedir.
Klima ve havalandýrma sistemlerinde meydana gelen sesin yutumunu saðlamak için kullanýlýrlar. Susturucuda kullanýlan kulis geniþlikleri 100 mm ve 200 mm olup içindeki dolgu malzemesi 2 adet 50 mm kalýnlýðýnda 50 kg/m3 yoðunluðundaki bir yüzü cam tülü kaplý cam yünüdür. Kullanýlan cam yünü DIN 4102 standardý A2 sýnýfýna uygun yanmaz özellikte olup, çürüme ve rutubete karþý dayanýklýdýr. Cam yününün hava ile temas eden yüzeyinin cam tülü ile kaplý olmasý 20 m/s’ye kadar olan yüksek hava hýzlarýnda yüzeyden partikül uçmasýný engeller. Ayrýca susturucular flanþlý olarak imal edilmekte olup, kullanýlan mastikli flanþlar 20 mm, 25 mm, 30 mm, 35 mm lik olup; 20 ve 25 mm lik mastikli flanþlarda montaj için M8 cývata ve somunlar, 30 ve 35 mm lik mastikli flanþlarda ise M10 cývata ve somunlar kullanýlmaktadýr.
* Giriþ ve çýkýþ aðýzlarýndaki flanþlardan cývata ve somunlarla dikdörtgen kanala montaj.
Model / W x H x L / n
Model:
Material:
Usage:
Installation:
Order Code:
*BSAB100 : Rectangular sound absorber whose splitter thickness is 100 mm
*BSAB200 : Rectangular sound absorber whose splitter thickness is 200 mm
After product casing is manufactured from 0,8 mm - 1,5 mm galvanized sheet according to its
dimension, its splitters are from 0,7 mm - 1 mm galvanized sheet, as for, prepared flange and flange
corner pieces are installed.
Rectangular sound absorbers are used for providing the absorbtion of the sound occuring in air conditioning and ventilation systems. The width of the splitters that are used in sound absorbers are 100 mm and 200 mm and the filling materials inside the splitters are 2 pieces of glasswools that have one surface coated with fiberglass with 50 mm thickness and 50 kg/m3 density. The glasswool that is used has the property of being nonflammable according to DIN 4102 A2 class and is resistant to decay and moisture. Glasswool’s surface that is in contact with air being coated with fiberglass prevents particles fly from the surface in high air velocities up to 20 m/s. Also, sound absorbers are manufactured with flange and the flanges with mastic that are used are 20 mm, 25 mm, 30 mm, 35 mm and; M.8 bolt and nuts are used for installation in 20 and 25 mm flanges with mastic, M.10 bolt and nuts are used in 30 and 35 mm flanges with mastic, as for.
* Installation to rectangular duct from the falnges in the inlets and outlets with bolts and nuts.
Model / W x H x L / n
Dikdörtgen Susturucu Teknik Detaylarý ve Standart Ölçüler TablosuRectangular Sound Absorber Technical Details and Standard Dimensions Table
W (mm) : Susturucu geniþliði (Sound absorber width)H (mm) : Susturucu yüksekliði (Sound absorber height)LSAB (mm) : Susturucu uzunluðu (Sound absorber length)nb (mm) : Kulis miktarý (Baffle quantity)sa (mm) : Hava geçiþ aralýðý (Air transition clearance )db (mm) : Kulis kalýnlýðý (Baffle thickness) 7.BSAB.3
150...1800
LSAB (mm)
500,7501000
1250,1500
Dikdörtgen Susturucu Teknik DetaylarýRectangular Sound Absorber Technical Details
Susturucu Standart Ölçüler TablosuSound Absorber Standard Dimensions Table
50.....120
ModelModel H (mm) sa (mm)
BSAB100
BSAB200 70.....210
W (mm)
150...1680
270...3200
db (mm)
100
200
Susturucu Standart Ölçüler TablosuSound Absorber Standard Dimensions Table
1
1 Ses absorbe edici yüzey (cam yünü + cam tülü)2 Perfore sac
2
1 Sound absorber surface (glass wool + fiberglass)2 Perforated sheet
Dikdörtgen Susturucu Siparis KoduRectangular Sound Absorber Ordering Code
BSAB100
Model
Model
BSAB100 KULIS KALINLIÐI 100 mm OLAN DÝKDÖRTGEN KANALTÝPÝ SUSTURUCU
RECTANGULAR DUCT TYPE SOUND ABSORBER THATHAS BAFFLE WITH THICKNESS OF 100 mm
Standart Ölçüler
Standard Dimensions
W x H x L (mm)
*Standart ölçüler için 3. sayfaya bakýnýz.
*Look at page 3 for standard dimensions.
BSAB200 KULIS KALINLIÐI 200 mm OLAN DÝKDÖRTGEN KANALTÝPÝ SUSTURUCU
RECTANGULAR DUCT TYPE SOUND ABSORBER THATHAS BAFFLE WITH THICKNESS OF 200 mm
Örnek Sipariþ KoduSample Ordering Code
Model /Model /
Standart Ölçüler /Standard Dimensions /
BSAB100 / W x H x L (mm) / [1000 x 750 x 1500 mm]
7.BSAB.4
Kulis Sayýsý
Splitter Number
n
n KULIS SAYISISPLITTER NUMBER
Kulis Sayýsý /Splitter Number /
n / [3]
Model:
Malzeme:
Kullaným:
Montaj:
Kaplama:
Sipariþ Kodu:
*BSAB-R : Podsuz yuvarlak susturucu.*BSAB-R&P: Podlu yuvarlak susuturucu.
BSAB-R modeli yuvarlak susturucunun dýþ yüzeyi galvanizli sacdan, hava akýmýna maruz kalan iç yüzeyi perfore sacdan, iki yüzey arasýnda kullanýlan dolgu malzemesi 50 mm kalýnlýkta 50
3kg/m yoðunlukta ve DIN 4102 standardý A2 sýnýfýna göre yanmaz özellikte taþ yününden imal edilmektedir. Diðer taraftan, BSAB-R&P modeli susturucuda ilave olarak ortada bulunan podun dýþ yüzeyi perfore galvaniz sacdan ve içi ise DIN4102 Standardý A2 sýnýfýna göre yanmaz özellikte bir tafaý cam tülü ile kaplý cam yününden imal edilmektedir.
Klima ve havalandýrma sistemlerinde birbirlerine hava kanallarýyla baðlý mahaller arasýnda hava kanallarý vasýtasýyla oluþan ses iletimini önlemek için kullanýlýrlar. Kullaným alanlarý ise görüþme salonlarý, ofisler, hastane odalarý, müzik odalarý, muayenehaneler gibi mekanlardýr.
*Yuvarlak kanala montaj*Yuvarlak kanal branþmanlarýna montaj
*Elektrostatik toz boya (Standart renkler RAL 9010 ve RAL 9016)*Ýsteðe baðlý olarak diðer tüm RAL kodundaki renkler de temin edilmektedir.
Model / Standart Ölçüler / (Ebat x Uzunluk (mm))
Model:
Material:
Usage:
Installation:
Coating:
Order Code:
*BSAB-R : Round sound absorber without pod.*BSAB-R&P : Round sound absorber with pod.
The external surface of the BSAB-R model round absorber is manufactured from galvanized sheet, the internal surface that is exposed to air flow is from perforated sheet, the filling material that is used between two surfaces is manufactured from rockwool with 50 mm
3thickness, 50kg/m density and property of being nonflammable accoring to DIN4102 Standard A2 Class. On the otherhand, in the BSAB-R&P model sound absorber, the external surface of the pod that is positioned as extra in the middle is manufactured from perforated galvanized sheet and the internal surface of the pod is manufactured from glasswool with one side coated by fiberglass according to DIN4102 Standard A2 Class.
Round sound absorbers are used for preventing sound transmission occuring via air ducts between the places connected to each other with air ducts in air conditioning and ventilation systems. Usage areas are places such as parlours, offices, hospital rooms, music rooms, consulting rooms, as for.
*Installation to round duct*Installation to round branch ducts
*Electrostatic powder coating (Standard colors are RAL 9010 and RAL 9016)*Depending on demand, all the colors in other RAL codes are provided too.
Model / Standard Dimensions/ (Size x Length (mm))
7.BSAB-R.5
YUVARLAK SUSTURUCU (BSAB-R)ROUND SOUND ABSORBER
Yuvarlak Susturucu Teknik Detaylarý ve Standart Ölçüler TablosuRound Sound Absorber Technical Details and Standard Dimensions Table
Yuvarlak Susturucu Teknik Detaylarý (Podsuz)Round Sound Absorber Technical Details (Without pod)
ØDi (mm) : Yuvarlak susturucu iç çapý (Round sound absorber internal diameter)ØDe (mm) : Yuvarlak susturucu dýþ çapý (Round sound absorber external diameter)ØDp (mm) : Pod çapý (Pod diameter)LSAB (mm) : Yuvarlak susturucu uzunluðu (Round sound absorber length)DISO (mm) : Ýzolasyon kalýnlýðý (Isolation thickness)
2Aeff. (m ) : Efektif alan (Effective area)7.BSAB-R.6
Yuvarlak Susturucu Standart Ölçüler Tablosu (Podlu)Round Sound Absorber Standard Dimensions Table (With pod)
Yuvarlak Susturucu Standart Ölçüler Tablosu (Podsuz)Round Sound Absorber Standard Dimensions Table (Without pod)
Yuvarlak Susturucu Teknik Detaylarý (Podlu)Round Sound Absorber Technical Details (With pod)
2Aeff. (m )
80
ØDe (mm) ØDi (mm)
DISO = 50 mm
90
100
125
140
150
160
180
200
250
300
350
400
78
88
98
123
138
148
158
178
198
248
298
348
398
180
190
200
225
240
250
260
280
300
350
400
450
500
LSAB = 500 mm LSAB = 950 mm LSAB = 1450 mm LSAB = 1950 mm
EbatSize
0,005
0,006
0,008
0,012
0,015
0,017
0,020
0,025
0,031
0,048
0,070
0,095
0,124
EbatSize
350
ØDe (mm) ØDi (mm)
DISO = 50 mm
355
400
450
348
353
398
448
450
455
500
550
LSAB (mm)
500 498 600
950
950
950
950
950
1450
1450
1450
1450
1450
ØDp (mm)
163
164
174
185
218
0,074
0,077
0,101
0,131
0,157
2Aeff. (m )
21
1 Cam yünü + Cam tülü2 Perfore sac
1 Glasswool + Fiberglass2 Perforated sheet
A
A
A - A KESÝTÝA - A CROSS SECTION
ØD
i
ØD
e
ØD
i
ØD
e
LSAB
DIS
O=
50
mm
A
A
A - A KESÝTÝA - A CROSS SECTION
21
1 Perfore sac2 Cam yünü + Cam tülü3 Pod
1 Perforated sheet2 Glasswool + Fiberglass3 Pod
3
LSAB
ØD
i
ØD
e
ØD
i
ØD
e
ØD
p
DIS
O=
50
mm
EbatSize ueff. (m/s)
2Aeff. (m )
800,005
900,006
1000,008
0,012125
0,015140
0,017150
0,020160
0,025180
0,031200
0,048250
0,070300
0,095350
0,124400
DP (Pa)
4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4
LSAB = 500 mm LSAB = 950 mm LSAB = 1450 mm
2 3 4 5 6 8 10 4 5 7 10 13 16 20 5 8 10 14 18 23 27 7
2 2 3 4 6 7 8
1 2 3 4 5 6 7
1 2 2 3 4 5 6
1 1 2 3 3 4 5
1 1 2 2 3 4 4
1 1 2 2 3 3 4
1 1 1 2 2 3 4
1 1 1 2 2 3 3
1 1 1 1 2 2 2
1 1 1 1 1 1 2
1 1 1 1 1 1 1
1 1 1 1 1 1 1
3 5 6 9 11 14 17
3 4 6 8 10 12 15
2 3 4 6 7 9 11
2 3 4 5 6 8 10
2 2 3 5 6 7 9
1 2 3 4 5 7 8
1 2 3 4 5 6 7
1 2 2 3 4 5 6
1 1 2 2 3 4 5
1 1 1 2 2 3 4
1 1 1 2 2 3 3
1 1 1 1 2 2 3
4 7 9 12 15 20 24
4 6 8 11 13 17 21
3 4 6 8 10 13 16
2 4 5 7 9 11 14
2 3 5 6 8 10 12
2 3 4 6 7 9 11
2 3 4 5 6 8 10
2 2 3 4 6 7 9
1 2 3 3 4 5 7
1 2 2 3 3 4 5
1 1 2 2 3 3 4
1 1 1 2 2 3 4
6
5
4
3
3
3
2
2
1
1
1
1
7.BSAB-R.7
Yuvarlak Susturucu Seçim Tablosu Round Sound Absorber Selection Table
Selection Table for Round Absorber Without Pod
Sound Drop Table for Round Sound Absorber Without Pod
LSAB (mm) : Yuvarlak susturucu uzunluðu (Round sound absorber length)ueff. (m/s) : Efektif hýz (Effective velocity)DP (Pa) : Basýnç kaybý (Pressure drop)
2Aeff. (m ) : Efektif alan (Effective area)DSD (dB) : Ses düþümü (Sound drop)f (Hz) : Frekans (Frequency)
EbatSize f (Hz)
2Aeff. (m )
800,005
900,006
1000,008
0,012125
0,015140
0,017150
0,020160
0,025180
0,031200
0,048250
0,070300
0,095350
0,124400
DSD (dB)
125 250 500 1000 20004000 8000
LSAB = 500 mm LSAB = 950 mm LSAB = 1450 mm
7 12 18 26 33 17 15 14 27 42 50 50 40 24 26 50 50 50 50 50 31 33 50
7 11 16 24 31 15 14
6 10 16 22 30 14 13
5 9 14 20 24 12 11
5 8 13 19 22 11 10
4 7 13 19 20 11 9
4 7 12 18 19 10 9
3 6 11 17 16 9 8
3 6 10 16 15 7 6
2 4 9 15 11 4 3
1 4 8 13 9 4 2
1 3 7 12 8 3 2
1 3 7 10 7 2 1
13 25 39 50 50 36 22
12 23 36 50 50 34 21
11 21 33 50 50 32 19
10 17 27 39 36 25 16
9 16 26 37 31 22 15
8 15 23 34 29 18 14
7 13 20 31 26 15 13
5 11 18 30 24 14 11
4 9 15 27 18 11 9
3 6 13 24 15 8 6
2 5 12 23 13 6 5
2 4 10 19 10 4 4
23 47 50 50 50 49 30
22 44 50 50 50 46 28
20 39 50 50 50 39 25
18 36 50 50 50 37 23
15 31 48 50 47 32 20
14 27 42 48 42 26 18
11 22 38 43 36 22 16
6 15 29 42 30 17 14
4 10 20 37 24 13 11
4 9 17 35 21 11 8
4 7 15 30 17 9 6
2 6 15 27 13 8 5
31 50
30 50
26 50
25 47
125 250 500 1000 20004000 8000 125 250 500 1000 20004000 8000 125 250
5 6 7 8 9 10
LSAB = 1950 mm
11 15 20 25 32 38
9 13 17 22 27 33
8 11 15 19 24 29
6 8 11 14 18 22
5 7 10 12 16 19
5 6 9 11 14 17
4 6 8 10 13 16
4 5 7 9 11 14
3 5 6 8 10 12
2 4 5 6 8 9
2 3 4 5 6 7
2 2 3 4 5 6
1 1 2 3 4 5
LSAB = 1950 mm
50 50 50 50 45
50 50 50 50 42
50 50 50 50 38
50 50 50 50 33
50 50 50 49 30
500 1000 20004000 8000
Podsuz Yuvarlak Susturucu için Ses Düsüm Tablosu
Podsuz Yuvarlak Susturucu için Seçim Tablosu
Yuvarlak Susturucu Seçim TablosuRound Sound Absorber Selection Table
7.BSAB-R.8
Selection Table for Round Absorber With Pod
EbatSize ueff. (m/s)
2Aeff. (m )
0,077355
0,101400
4 5 6 7 8 9 10 4 5 6 7 8 9 10
LSAB = 950 mm LSAB = 1450 mm
15 24 32 46 60 76 91
13 22 30 42 54 69 84
18 29 39 56 73 92 111
16 27 38 52 65 87 109
0,131450
0,157500
13 21 29 40 51 65 79
12 20 28 39 49 63 77
15 25 34 47 60 77 93
14 24 33 45 57 74 90
EbatSize f (Hz)
2Aeff. (m )
DSD (dB)
125 250 500 1000 20004000 8000
LSAB = 500 mm LSAB = 950 mm
5 8 17 35 33 13 6
125 250 500 1000 20004000 8000
0,077355
0,101400
0,131450
0,157500
5 7 13 30 28 10 5
4 6 12 26 23 9 4
3 5 10 24 21 7 4
8 11 29 44 37 18 10
6 9 27 39 32 16 8
5 8 22 34 30 15 7
4 7 20 30 27 14 6
0,074350 5 8 17 36 34 14 6 8 11 30 46 39 19 10
DP (Pa)
Sound Drop Table for Round Sound Absorber With Pod
LSAB (mm) : Yuvarlak susturucu uzunluðu (Round sound absorber length)ueff. (m/s) : Efektif hýz (Effective velocity)DP (Pa) : Basýnç kaybý (Pressure drop)
2Aeff. (m ) : Efektif alan (Effective area)DSD (dB) : Ses düþümü (Sound drop)f (Hz) : Frekans (Frequency)
Podlu Yuvarlak Susturucu için Seçim Tablosu
Podlu Yuvarlak Susturucu için Ses Düsüm Tablosu
7.BSAB-R.9
Yuvarlak Susturucu Siparis Kodu Round Sound Absorber Order Code
BSAB-R
Model
Model
BSAB-R PODSUZ YUVARLAK SUSTURUCUROUND SOUND ABSORBER WITHOUT POD
Standart Ölçüler
Standard Dimensions
Ebat x Uzunluk (mm)
*Standart ölçüler için 6. sayfaya bakýnýz.
*Look at page 6 for standard dimensions.
BSAB-R&P PODLU YUVARLAK SUSTURUCUROUND SOUND ABSORBER WITH POD
Bu föy sürekli olarak güncellenmektedir.Dolayýsýyla teknik deðiþiklikler ve adaptasyonlar mümkündür!
Uygulamanýzý birlikte belirleyebilmemiz için lütfen bizimle iletiþimkurunuz!
This booklet is updated constantly.Therefore, technical changes and adaptations are possible!
Please contact us, in order to define your application together!
Örnek Sipariþ KoduSample Order Code
Model /Model /
Standart Ölçüler /Standard Dimensions /
BSAB-R / Ebat x Uzunluk (mm) / [Ø200 x 500 mm]
NotlarNotes
7.BSAB-R.10
7.BSAB-R.11
Notlar Notes
Recommended