View
2
Download
0
Category
Preview:
Citation preview
Every day, we build trust and create value
Surface Treatment Technologies
Electronics Market
Every day, we build trust and create value
Vertically Integrated Specialty Chemical
Company
USD $700M+ Revenue
650+ Employees 7 Global Manufacturing
Facilities
20 Global Commercial
Locations
4 Operating Units
Vantage Specialty Chemicals
Shanghai, ChinaMumbai, India
Barcelona, SpainLondon, EnglandCedex, FranceLeipzig, Germany
Bogota, ColumbiaBuenos Aires, ArgentinaGuatemala City, Guatemala Lima, PeruSantiago, ChileSan Jose, Costa RicaSao Paulo, Brazil
Calumet City, ILCarnegie, PAChicago, ILDelta, COEnglewood, OHGurnee, ILHouston, TXLinden, NJPittsburgh, PAPoca Rivera, CACDMX, MexicoTucson, AZWarren, NJ
Midrand, South Africa
Business Units
VANTAGE PERFORMANCE MATERIALS Specialty chemicals, intermediates, oleochemical derivatives, encapsulation and surface treatment technologies
VANTAGE OLEOCHEMICALS Oleochemicals e.g. oleic acid, glycerin for a variety of markets
VANTAGE FOOD Release oils, processing aids, spray equipment, stabilizers, emulsifiers and defoamers
VANTAGE PERSONAL CARE Specialty, basic and natural ingredients for personal care as well as a supplier and repackager of active and excipients for pharmaceutical applications
Vantage Performance Materials
Multi-functional batch facility 40 miles north of Chicago
19 reactors and 21 mixing vessels enable production for both small and large orders
Location and railroad access provide cost advantages for key raw materials
Every day, we build trust and create value
Vantage Surface Treatment Technologies a Vantage Performance Materials Business Segment
A leading global supplier of formulated process cleaning solutions and surface treatments for the electronics component and circuit assembly market.
Every day, we build trust and create value
About Us
For nearly 30 years, Vantage STT (formerly Petroferm)has developed, manufactured and supplied highreliability cleaning products and surface treatments forthe electronic component and circuit assembly market.
Our products are designed for use in standard inlineand batch defluxing systems, stencil and misprintcleaning equipment as well as vapor degreasingsystems.
Recognized by customers for our complete line of non-halogenated manual cleaning products which are idealreplacements for isopropyl alcohol (IPA).
Marketed under the AXAREL™, BIOACT™, HYDREX™and LENIUM™ brands, these cleaning products arespecially formulated to meet today’s performance,compatibility and environmental requirements.
Vantage Points
CUSTOMER SERVICE PRODUCT PERFORMANCE, QUALITY, &
QUALIFICATIONS
COMPREHENSIVE PORTFOLIO
MARKET FOCUSED PROCESS-DRIVEN EHS STEWARDSHIP
Segments
Electronic Component Manufacturing
Printed Circuit Board Assembly (PCBA)
Every day, we build trust and create value
Examples of Devices Cleaned
PCBAs for Aerospace, Auto, Defense, Medical
Wafer Level Packages & Bumped Wafer
Power & Ignition Modules
RF & Microwave Devices
Flip Chips, MCMs, SiPs, BGAs, CSPs, & Hybrid Electronics
Probe Cards
Sensors – pressure, temperature, optical
Stencils
Pallets
PCBA equipment
Contaminants Removed
No-Clean Flux Residue
RA/RMA Flux Residue
Water-Soluble Flux Residue
Misprinted (Raw) Solder Paste
Ionic Contamination
Uncured Surface Mount Adhesive
Particulate Matter
Baked-On-Grease/Oil
Mold Release Agents
Rubber/Elastomers
Plastics/Resins
Shop Dirt
Fingerprints
Dust
Customers
Technology Range
AqueousSprayImmersion Ultrasonics
Semi-AqueousSprayImmersion
Solvent
SprayImmersion UltrasonicsManual
Vapor DegreasingVapor-only Ultrasonics
Every day, we build trust and create value
Product Categories
Stencil & Misprint Cleaners
PCBA Cleaners
Semicon &Component Cleaners
Cleaners for Pallets & Equipment
PCBA Rework Solutions
When can we help?
Issues with boards or components failing? Reject rates increasing?
Poor cleaning results with IPA? Leaving white residues behind?
Difficulties cleaning under low standoff height components?
Searching for a cleaner with low or no VOCs?
Current cleaner’s flash point is a concern?
Interested in cleaners with no HAPs and low toxicity?
Growing costs associated with waste treatment?
Hard time maintaining concentration of current cleaner?
Issues with high foaming in spray equipment?
Current process and cleaner results in dulling of solder joints?
Damage to electronic components and solder masks?
Damage to nano-coatings on stencils?
Challenges cleaning baked-on flux residues?
PCBA Cleaners
Product Description MethodEquip
UseConc
Use Temp
BIOACT EC-78 Low-foaming cleaner with inhibitors for batch and inline spray equipment. Designed for extended wash cycles and multi-pass cleaning.
Spray-in-air 5-25% 120-160˚F (50-70˚C)
BIOACT EC-88 Low-foaming cleaner for inline spray equipment. Designed for high throughput operations. Reduces solder mask and component damage.
Spray-in-air 10-25% 120-160˚F (50-70˚C)
BIOACT EC-98 Versatile PCB cleaner for ultrasonic cleaning operations. Ultrasonics 5-25% 100-170˚F (40-80˚C)
BIOACT SC-22 Powerful, rinse-free solvent ideal for pre-conformal coating cleaning. Immersion 100% Ambient
LENIUM ES Stabilized vapor degreasing and defluxing solvent. Based on n-Propyl Bromide (nPB). Excellent on RMA solder paste flux residues.
Vapor 100% 148-151°F (64-66°C)***
AXAREL 2200 Solvent cleaner designed to replace isopropyl alcohol (IPA). Removes white residue. Lowers VOCs.
Manual; Soak
100% Ambient
*** Denotes boiling point
PCBA Cleaning
Spray-In-Air
Spray-Under-Immersion
Soak & Brush In Immersion
Ultrasonic Immersion
Vapor Degrease
Manual Hand Wipe
BIOACT EC-78
BIOACT EC-88
BIOACT EC-98
BIOACT SC-22
LENIUM ES
AXAREL 2200
Quick Selection Guide
Stencil and Misprint Cleaners
Product Description MethodEquip
UseConc
Use Temp
BIOACT SC-2075 Rinse-free stencil cleaner for batch spray equipment. Nitrogen & Phosphorous free. pH Neutral. Low Volatile Organic Compounds (VOCs)
Spray-in-air 5-15% 115-130°F (46-54°C)
BIOACT SC-22 Powerful, rinse-free solvent for removing uncured Surface Mount Device (SMD) adhesives and raw solder pastes.
Immersion 100% Ambient to 125°F (49°C)
HYDREX SP-50 Water-rinsable cleaner for uncured SMD adhesives and raw solder pastes. pH Neutral. Low VOCs.
Spray-in-air 5-15% 115-130°F (46-54°C)
HYDREX A-PLUS Water-rinsable cleaner for uncured SMD adhesives and raw solder pastes. Safe on nano-coatings. pH Neutral. Low VOCs.
Ultrasonics 5-25% 100-170˚F (40-80˚C)
AXAREL 2200 Multiuse manual cleaner for stencils and misprints. Also used in offline cleaning systems and printer underwiping. Replaces IPA.
Manual 100% Ambient
Stencil and Misprint Cleaning
Spray-In-AirSpray-Under-
ImmersionUltrasonic Immersion
Manual Hand Wipe
AXAREL 2200
BIOACT EC-7M
BIOACT SC-10
BIOACT SC-22
BIOACT SC-2075
HYDREX A-PLUS
HYDREX SP-50
Quick Selection Guide
Semicon & Component Cleaners
Product Description MethodEquip
UseConc
Use Temp
AXAREL 32 Semi-aqueous solvent cleaner. Removes ionic contamination, high temp flux residues, oils and other manufacturing contaminants
Spray-in-air; Immersion
100% Ambient to 160°F (71°C)
BIOACT EC-15 High flash point, semi-aqueous solvent cleaner. Ideal for cleaning after high temp reflow commonly found in microelectronics production. Effectively removes baked or charred-on solder paste flux residues.
Spray-in-air; Immersion
100% 140-180˚F (60-82˚C)
BIOACT EC-7R Bio-based, semi-aqueous citrus cleaner designed for ambient defluxing applications. Removes ionic contamination and high temperature solder flux.
Spray-in-air; Immersion
100% Ambient
BIOACT SC-22 Powerful, rinse-free solvent cleaner for agitated immersion cleaning systems. Immersion 100% Ambient to 125°F (49°C)
AXAREL 2200 Rinse-free solvent cleaner used to soak clean electronic components. Removes flux residues and other manufacturing contaminants.
Manual;Immersion
100% Ambient
Semicon & Component
Cleaning
Quick Selection Guide
Spray-In-AirSpray-Under-
ImmersionSoak & Brush In Immersion
Ultrasonic Immersion
Manual Hand Wipe
AXAREL 32
BIOACT EC-15
BIOACT EC-7R
BIOACT SC-22
AXAREL 2200
Cleaners For Pallets & PCBA Equip
Product Description MethodEquip
UseConc
Use Temp
BIOACT EC-98 Water-rinsable pallet cleaner for ultrasonic cleaning operations Ultrasonics 5-25% 100-170˚F (40-80˚C)
AXAREL 2200 Versatile, solvent cleaner for pallets, reflow ovens and clean purpose cleaning of PCBA equipment
Manual; Immersion
100% Ambient
BIOACT SC-10 Powerful, citrus-based manual cleaner ideal for cleaning baked-on flux residues soils in PCBA equipment.
Manual 100% Ambient
BIOACT EC-15 High flash point, semi-aqueous solvent cleaner. Effectively removes baked or charred-on solder paste flux residues.
Spray-in-air; Immersion
100% 140-180˚F (60-82˚C)
BIOACT SC-22 Powerful, rinse-free solvent cleaner for agitated immersion cleaning systems. Immersion 100% Ambient to 125°F (49°C)
LENIUM ES Stabilized vapor degreasing and defluxing solvent. Based on n-Propyl Bromide (nPB). Vapor 100% 148-151°F (64-66°C)***
ScaleSafe 9430 Aqueous descaler ideal for removing buildup in defluxing equipment Spray-in-air 20% 120-160˚F (50-70˚C)
Cleaning Pallets and
PCBA Equipment
Quick Selection Guide
Spray-In-Air
Spray-Under-Immersion
Soak & Brush In Immersion
Ultrasonic Immersion
Vapor Degrease
Manual Hand Wipe
BIOACT EC-98
AXAREL 2200
BIOACT SC-10
BIOACT EC-15
BIOACT SC-22
LENIUM ES
ScaleSafe 9430
PCBA Rework Solutions
Product Description MethodEquip
UseConc
Use Temp
AXAREL 2200 Versatile, solvent cleaner for removing flux residues during rework. Also removes tape residues, raw solder pastes and uncured SMD mount adhesives. Replaces IPA. Eliminates white residues
Manual; Immersion 100% Ambient
BIOACT EC-7M Citrus-based manual cleaner for removing adhesives, flux residues, inks, oils, greases and silicone-based conformal coatings.
Manual 100% Ambient
BIOACT SC-10 Fast evaporating cleaner ideal for cleaning flux residues. Also removes tape residues and acrylic-based conformal coatings. Replaces IPA. Eliminates white residues.
Manual 100% Ambient
BIOACT 108 Powerful solvent cleaner designed to remove some types of acrylic and silicone-based conformal coatings.
Manual 100% Ambient
PCBA Rework Solutions
Quick Selection Guide
Manual Hand Wipe Defluxing
Conformal Coating Removal
IPA Replacments
AXAREL 2200
BIOACT EC-7M
BIOACT SC-10
BIOACT 108
Every day, we build trust and create value
Tell Us…
Tell us the areas where we can improve cleaning performance…
Any rejects, rework, scrap? What is the % rate?Do you have components with standoff heights under 1 millimeter? Are you cleaning under them?Does your board have white residues remaining after cleaning?
Tell us about any incompatibility issues…
Does the current cleaner dull solder joints?Does the current cleaner attack components, metal surfaces, solder masks?
Tell us about any process challenges
Do you have to run your board through the washer multiple times?Does your process require additives to monitor concentration or boost effectiveness?Do you have foaming issues? How do you treat foam?
Tell us about your scheduled and unscheduled maintenance…How often do you change your wash bath?Do you have scaling issues?Any water treatment challenges such as high pH?
Every day, we build trust and create value
Vantage STT
Process Driven, Solution-Oriented
Vision: To be recognized by our customers as the leading global provider of qualified surface treatments and technical support in the electronics component and circuit assembly market.
Our Promise: Vantage STT supports its global electronics customers with a complete range of safe and qualified surface treatments. Through a process-driven and collaborative approach, we help our customers meet and exceed goals for profitability, quality and EH&S.
Every day, we build trust and create value
Thank you for your continued support
Company Contact Details
Headquarters:
Vantage Specialty Chemicals, Inc.
3938 Porett Drive
Gurnee, Illinois 60031 USA
Customer Service (Direct phone): +1-847-249-6353/6366
Customer Service (Direct fax): +1-847-249-6346
Customer Service Email: customerservice@vantagegrp.com
Visit www.vantagegrp.com to view our list of surfacetreatments
Recommended