View
4
Download
0
Category
Preview:
Citation preview
www.Medidenta.com
SUITABLE ENDODONTICS
One of my favorite quotes by Einstein reads:
“We cannot solve our problems with the same level of Thinking that created them.”
To me, Einstein explains it is inconceivable that we could find the answers we need while being on the same level of consciousness in which we see such things as a problem. I feel that I am exceedingly fortunate because I have a very satisfying and inspiring job where my first mission is to find answers to the challenges faced by endodontists and clinicians on their daily endo practice.
After nearly 25 years of performing root canal treatments in my office and having been a professor of endodontics at a university, conducted research and lectured in so many different places, now my task is to use technology not only to improve the quality of the endodontic treatment but to make it accessible to all who are willing to carry it out responsibly using proper training and accurate technique.
In these difficult times we need to create solutions that are suitable from a practical and financial point of view. When I took on the position of director of Medidenta’s clinical affairs, i made it my firm intention to bring solutions of proven quality at a cost fitting to a new, challenging, ever-changing reality for everyone.
Seeing the answer allows your mind to clear- free from extraneous thinking, as einstein told us, our problems will be solved not only because we are better educated and trained, but because when doing something you love, you acquire new insight or a new idea. This translates, plain and simple, to what I am passionately doing now!
A legitimate education process with a direct line with Medidenta’s in-house clinical affairs director, Dr.Carlos Spironelli Ramos
edidenta’s M-Endo Suitable Endodontics signifies “the right thing in endodontics”. Suitable stands for accurate, proper, legitimate and fair. The accurate manufacturing and state-of-the-art heat treatment process, making the resulted file efficient and flexible; the proper technique, with each product presentation being followed by a simplified streamlined technique for each case challenge in endodontics; a legitimate education process, a tutoring direct line to help the dentist in any clinical endodontic case; and fair price, affordable fitting price equalized by the new norm.
Suitable Education
Got endo questions, or just want to talk dentistry?
Contact Dr. Carlos Spironelli Ramos Directly, Call: 877.221.0750 or Email: carlos.ramos@medidenta.com
Dr.Carlos Spironelli Ramos is an endodontist and completed an endodontics PhD program (1997), the same year he published his first book. He was the head of endodontics department at the State University of Londrina, Brazil. During this time, he published three books and wrote more than a dozen chapters for various endodontics books. He is an international speaker in endodontics, presenting lectures, hands-on workshops, and conferences worldwide each year. Dr. Ramos lives in U.S. since 2012 and he is the Clinical Affairs Director at Medidenta.
Heat Treatment is an endeavor to obtain the maximum efficiency of the material under the demanding conditions of service. Can be defined1 as a combination of heating and cooling operations, timed and applied to an alloy in the solid state in a way that will produce desired properties.
In Endodontics the Heat Treatment process for NiTi files is being used to achieve more flexibility and higher scores of cyclic fatigue resistance. Another interesting property achieved with the heat treatment is the capacity of pre-bending a NiTi file.
Medidenta’s M-Endo Gold files series are manufactured using a fine-tuned heat treatment process, allowing our Gold series NiTi files to be even more flexible2 than the predecessors without compromising the efficacy of the cutting. Thus, Medidenta’s M-Endo Gold files performance will be escalated by a higher flexibility and increased cyclic fatigue resistance.
Experimental test showing different levels of heat treatment at the same file, starting with purple, blue and gold surface oxidizing colors.
1 Metal hand book; 2 Medidenta’s clinical affair lab tests
An accurate engineering and proprietary heat treatment process gives you peace of mind when using the M-Endo files line
11mm handle specially attached to the working part that allows the use of endomotors coupled
with foramen locator
State-of-the-art heat treatment process, giving 3X more cyclic fatigue resistance compared with non-heat treated NiTi
Flutes depth enhanced by the core progressive diameter
providing better debris removal
Double-angled non-cutting tip preventing ledging and
perforation
Working length grinded depth marks
ISO Color Code
1mm thick stable rubber stop
How Heat Treatment can affect your file performance?
Suitable Manufacturing
Alloy Phase Expression
For More info or to p lace and order Cal l 800.221 .0750 or Vis i t www.medidenta .com
The classic progressive
taper file with enhanced flexibility
M-Taper Gold M-Taper
296
98
Files can be pre-bent
Medidenta clinical affairs lab tests
*Comparable to ProTaper Gold®
*ProTaper Gold® is a Trademark of their respective holders. Use of their name does not imply endorsment or affiliation.
Variable Taper
The standard progressive multi taper files got
a boost with the heat treatment, increasing
its flexibility and empowering the well-known
usage protocol to a different level of clinical
case difficulty
Suggested use (based on average morphology):
• Classic multi progressive taper files with enhanced cyclic fatigue resistance
• Multi progressive taper creates a smooth enlargement of the canal without ledging or straightening
• Tapered shape canal shaping for a convenient thermoplastic obturation
Curved and narrow canalsLower molars MB and MLUpper molars MB, MB2 and DB
CSX
19 .0
4
CS1
18 .0
2
CS2
20 .0
4
AF1
20
.07
Opt
iona
l M-F
ile G
old
25 .0
6
Curved canalsUpper premolarsLower molar DUpper molar P
CSX
19 .0
4
CS2
20 .0
4
AF2
25
.08
Opt
iona
l M-F
ile G
old
40 .0
4Straight canalsLower premolarsAnterior
CSX
19 .0
4
AF2
25
.08
AF3
30
.09
AF4
40
.06
Opt
iona
l M-F
ile G
old
larg
er fi
les
Made Of USA NiTi Wire All Sizes One Low Price: $28.00 / Pack of 6
For More info or to p lace and order Cal l 800.221 .0750 or Vis i t www.medidenta .com
M-One Gold reciprocating files uses the asymmetric reciprocation left cutting
motion, allowing efficacious shaping of even severely curved root canals with less files. The proprietary heat treatment used in the M-One Gold manufacturing process gives
more flexibility and 3 times increased cyclic fatigue resistance (comparing with a non-
heat treated NiTi wire) letting a smooth, safe and efficient instrumentation.
The safety of the
reciprocation movement reaching a
higher level of efficiency
*Comparable to Wave One Gold®
*Wave One Gold® is a Trademark of their respective holders. Use of their name does not imply endorsment or affiliation.
150°
30°
Suggested use (based on average morphology):
• Can be used with standard reciprocating modes in existing motors (left cutting, ccw>cw)
• Enhanced cyclic fatigue resistance due to proprietary heat treatment process
• High cutting efficiency without compromising the control of the file inside the canal
• Available in different diameters and tapers (20 .07, 25 .07, 35 .06 and 45 .05) to fit perfectly in your sequence
• A Glidepath file (15 .02) is available for very difficult narrow and curve canals instrumentation initiation
Curved and narrow canalsLower molars MB, MB2 and MLUpper molars MB and DB
CS1
18 .0
2
CS2
20 .0
4
AF1
20
.07
Opt
iona
l M-F
ile G
old
35 .0
4 in
rot
atio
n
Made Of USA NiTi Wire
Curved canalsUpper premolarsLower molar DUpper molar P
20 .0
7
35 .0
6
45 .0
5
Opt
iona
l M-F
ile G
old
larg
er fi
les
in r
otat
ion
Straight canalsLower premolarsAnterior
AF2
25
.08
AF3
30
.09
Opt
iona
l M-F
ile G
old
40 .0
4 in
rot
atio
n
All Sizes One Low Price: $20.00 / Pack of 3
For More info or to p lace and order Cal l 800.221 .0750 or Vis i t www.medidenta .com
The constant taper files collection essential to your own sequence. Available in .04
and .06 tapers, the M-File Gold supply all protocols requests with a complete line of
tip diameters and tapers. Alternating .04 and .06 tapers with the same tip diameters gives
you a low engagement forces progress of your files, avoiding unnecessary excessive
apical load of the file
• Constant taper .04 and .06 collection of files (from 15 to 80)
• Mix and match to fulfill your technique protocol
• Proprietary heat treatment with a perfect balance between cutting efficiency and flexibility
The best cost-effective
files with your protocol
Made Of USA NiTi Wire
Red stopper shows the taper
.06
Green stopper shows the taper
.04
Constant Taper
*Comparable to K3™XF, Vortex Blue®™,
*K3™XF and Vortex Blue® are Trademarks of their respective holders. Use of their names does not imply endorsment or affiliation.
All Sizes One Low Price: $28.00 / Pack of 6
Engine-driven files are normally tapered designed to determine a funnel type preparation, creating a convenient space for irrigation and following obturation. To avoid torsional forces on the apical end of the file, the L.E.T. is vested in different tapers of the M-File Gold series. The main goal is to avoid the red area of action, meaning always working in a range from 20 to 30% amplitude after cutting.
What is the Low Engagement Technique™ (L.E.T.)?
For More info or to p lace and order Cal l 800.221 .0750 or Vis i t www.medidenta .com
35 .0
445
.04
35 .0
4
20 .0
4
25 .0
635
.06
25 .0
6
15 .0
4
25 .0
425
.04
25 .0
4
25 .0
6
25 .0
6
Opt
iona
l lar
ger
files
in s
eque
nce
Opt
iona
l lar
ger
files
in s
eque
nce
Low Engagement Technique™(L.e.t.) Protocol1. Determine the temporary working length and the
depth of the curvature2. Insert M-File Gold 25 .06 to the curvature length or
until resistance. Withdraw the file and use brushing movements. Do not exceed 10 seconds
3. Copiously irrigate4. Determine the W.L. with a SS K-file5. Create a glide path using the M-File Gold15 .04 and
20 .04 files to the W.L. After using the file for max. 10 seconds, copiously irrigate.
6. Insert M-File Gold 25 .04 to the W.L. After using the file for max. 10 seconds, copiously irrigate preferably with CUI* (30s).
7. Insert M-File Gold 25 .06 to the W.L. After using the file for max. 10 seconds, copiously irrigate preferably with CUI (30s).
8. Finish with M-File Gold 35 .04 or progressively with the file diameter/taper of your preference. After using the file for max. 10 seconds, copiously irrigate preferably with CUI (30s).
Curved canalsUpper premolarsLower molar DUpper Molar P
Straight canalsLower premolarsAnterior
Curved and narrow canalsLower molars MB, MB2 and MLUpper molars MB and DB
Suggested use (based on average morphology):
M-ENDOOrder Information
M-TAPER GOLD
M-ONE GOLD
M-FILE GOLD
M-FILE GOLD ORIFICE OPENER
19mm
21mm
21mm
19mm
21mm
25mm
25mm
25mm
31mm
31mm
CSX
35
35
20 .07
15
15
20
MTGCS121
MTGCS121
MTGCS121
MOG2120
MOG2120
MOG2120
MOG2520
MOG2520
MOG2520
MOG2520
MOG3120
MOG3120
MOG3120
--
--
--
--
--
--
MTGCS121
MTGCS121
MTGCS121
MTGCS125
MTGCS125
MTGCS125
--
--
--
MOG2125
MOG2125
MOG2125
MOG2525
MOG2525
MOG2525
MOG3125
MOG3125
MOG3125
CS1
40
40
25 .07
20
20
MTGCS221
MTGCS221
MTGCS221
MTGCS225
MTGCS225
MTGCS225
--
--
--
MOG2135
MOG2135
MOG2135
MOG2535
MOG2535
MOG2535
MOG3135
MOG3135
MOG3135
CS2
45
45
35 .06
25
25
MTGAF121
MTGAF121
MTGAF121
MTGAF125
MTGAF125
MTGAF125
--
--
--
MOG2145
MOG2145
MOG2145
MOG2545
MOG2545
MOG2545
MOG3145
MOG3145
MOG3145
AF1
50
50
45 .05
30
30
--
--
--
MOG2115 MOG2515 MOG3115
MTGAF221
MTGAF221
MTGAF221
MTGAF225
MTGAF225
MTGAF225
AF2
55
55
15 .02 Glidepath File
Shaping File
.04 Taper
.06 Taper
.08 Taper
MTGAF321
MTGAF321
MTGAF321
MTGAF325
MTGAF325
MTGAF325
--
--
--
AF3
60
60
MTGAF421 MTGAF425--AF4 MTGAF521 MTGAF525--AF5 MTGAS21
MTGAS21
MTGAS21
MTGAS25
MTGAS25
MTGAS25
--
--
--
ASSORTED (CSX - AF3)
ASSORTED (15 - 40)
ASSORTED (15 - 40)
Sold In Packs of 6$28.00
Sold In Packs of 3$20.00
Sold In Packs of 6$28.00
Looking For Non-Heattreated Files?M-taper and M-file are also available at www.medidenta.com or via phone 877.221.0750
For Information Contact UsPh. 800.221.0750
Or Visit: www.Medidenta.com
Suitable Endo, With a HUGE Upside
No Office Is The Same, Call To Customize Your Offer! Call 800.221.0750 and ask how you can substitute a different handpiece or additional files for free.
Buy 30 Packs Of Any M-Endo Gold Files
Any Combination of 30 - M-One Gold, M-Taper Gold, or M-File Gold, file Packs.
Buy 50 Packs Of Any M-Endo Gold Files
Any Combination of 50 - M-One Gold, M-Taper Gold, or M-File Gold, file Packs.
Get 1 Turbo Torque 1200 FREE
Get 1 Turbo Torque 2200 FREE
Turbo Torque
Turbo Torque
Recommended