View
4
Download
0
Category
Preview:
Citation preview
RMD Kwikform United KingdomStruts,
Walers and Trench Sheets
PRODUCT BROCHURE
Product OverviewRMD Kwikform's range of Struts and Walers are designed and manufactured in accordance with the latest standards EN14653, EN1090 and carry the quality CE Mark. Comprising of 6 different lengths of strut assemblies (types A-F) and 5 different lengths of aluminium walers with simple pin connections, this easy to assemble hydraulic system is designed to be used in conjunction with steel sheets for the support of small trenches for the safe installation of utilities.
FasterPinned connections allow for faster assembly (no bolted connections).
Very few components making it easy to assemble.
SaferSeparate Eyebolts on the Walers for lifting & suspension points allow for safer installation.
Market leading strength.
EasierTee pins designed for ease of handling.
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
1
Key Features & BenefitsNo Bolted ConnectionsHydraulic Struts simply pin into aluminium walers, reducing labour requirements.
Integral lifting & suspension eyesMeans that frames can be suspended on the crane until they are safely attached to the sheets with restraint chains.
Fine and Coarse AdjustmentEach of the props have a 310mm stroke hydraulic cylinder however the longer 3 struts have an Extending Trunion End to give an additional 300mm of adjustment.
Range of Strut and Waler SizesStruts are supplied in 6 lengths & Aluminium Walers are supplied in 5 different lengths to accommodate varying widths and lengths of pipes on site.
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
2
In DetailEuropean Standard ComplianceRMD Kwikform's hydraulic struts and walers are fully European standard compliant, designed and manufactured in accordance with the latest standards EN14653, EN1090 and carry the quality CE mark.
SimplicityThere are no bolted connections, the struts simply pin to the walers as set positions using a T Pin & R-Clip. This connection has been designed for speed and ease of handling.
DurabilityThe Hydraulic Strut Oversleeves have been Galvanised & The Aluminium Walers have been powder coated for extra protection and durability on site.
StrengthWith a maximum axial capacity of 113kN, RMD Kwikform’s Hydraulic Struts have Market Leading Strength.
SafetyThe Aluminium Walers have been designed with integral lifting and restraint chain connecting points for safer installation of frame assemblies. These lifting eyes have been incorporated on both the top and bottom of the walers to allow each frame assembly to be suspended from the one above thus removing the necessity for long restraint chains.
FlexibilityEach leg length has a sensible overlap to allow for over digging or under digging on site, with a 310mm stroke range on the A, B & C Legs and a 610mm Stroke on the longer D, E & F legs. Suspended from the trench sheets with restraining chains, the hydraulic struts have been designed to clear span up to 3.07m Sheet to Sheet & the aluminium Walers have been designed to accommodate pipes up to 3.0m long.
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
3
Components
Code Description Weight
HFU60001 Waler Strut A Assembly 610-920mm 22.9 kg
HFU60002 Waler Strut B Assembly 865-1175mm 30.2 kg
HFU60003 Waler Strut C Assembly 1125-1435mm 32.1 kg
HFU60004 Waler Strut D Assembly 1390-2000mm 37.1 kg
HFU60005 Waler Strut E Assembly 1910-2520mm 41.0 kg
HFU60006 Waler Strut F Assembly 2440-3050mm 44.9 kg
Hydraulic Strut Assemblies
Code Description Weight
HFU60020 Aluminium Waler 107 - 2.0m 22.6 kg
HFU60025 Aluminium Waler 107 - 2.5m 27.9 kg
HFU60030 Aluminium Waler 107 - 3.0m 33.4 kg
HFU60035 Aluminium Waler 107 - 3.5m 38.6 kg
HFU60040 Aluminium Waler 107 - 4.0m 43.9 kg
Aluminium Walers
Code Description Weight
HFU60010 Waler Strut T Pin 16mm 0.43 kg
HFU61804 R-Clip 5x30mm dia BZP 0.1 kg
Waler Strut T Pin & R Clip
Code Description Weight
VAU10010 Restraint Chains - HD Shackle-Shackle 13.0 kg
VAU10011 Restraint Chains - HD Shackle-Hook 13.0 kg
Restraint Chains
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
4
Components
Code Description Weight
LSU10020 Trench Sheet 330 x 3.5mm thk x 2.0m 22.7kg
LSU10025 Trench Sheet 330 x 3.5mm thk x 2.5m 28.4 kg
LSU10030 Trench Sheet 330 x 3.5mm thk x 3.0m 34.0kg
LSU10035 Trench Sheet 330 x 3.5mm thk x 3.5m 39.7kg
LSU10040 Trench Sheet 330 x 3.5mm thk x 4.0m 45.4kg
LSU10045 Trench Sheet 330 x 3.5mm thk x 4.5m 51.0kg
LSU10050 Trench Sheet 330 x 3.5mm thk x 5.0m 56.7kg
LSU10055 Trench Sheet 330 x 3.5mm thk x 5.5m 62.4kg
Overlapping Standard Trench Sheet 330
Code Description Weight
VAU10028 Ancil Equip British Standard Driving Cap
3.0kg
VAU10023 Ancil Equip Pile Pitching Shackle - 3T 16.0kg
VAU10026 Ancil Equip Trench Sheet Extractor - 3T 15.0kg
Standard 330 Associated Ancillaries
Code Description Weight
LSU11020 KD Trench Sheet 400 x 6mm thk x 2.0m
44.5kg
LSU11025 KD Trench Sheet 400 x 6mm thk x 2.5m
55.6kg
LSU11030 KD Trench Sheet 400 x 6mm thk x 3.0m
66.7kg
LSU11035 KD Trench Sheet 400 x 6mm thk x 3.5m
77.8kg
LSU11040 KD Trench Sheet 400 x 6mm thk x 4.0m
88.9kg
LSU11045 KD Trench Sheet 400 x 6mm thk x 4.5m
100kg
LSU11050 KD Trench Sheet 400 x 6mm thk x 5.0m
111kg
LSU11055 KD Trench Sheet 400 x 6mm thk x 5.5m
122kg
LSU11060 KD Trench Sheet 400 x 6mm thk x 6.0m
133kg
Overlapping KD Trench Sheet 400/6
Code Description Weight
VAU10028 Ancil Equip British Standard Driving Cap
3.0kg
VAU10023 Ancil Equip Pile Pitching Shackle - 3T 16.0kg
VAU10026 Ancil Equip Trench Sheet Extractor - 3T 15.0kg
KD 400/6 Associated Ancillaries
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
5
Components
Code Description Weight
LSU12020 KD Trench Sheet 600 x 6mm thk x 2.0m
75kg
LSU12025 KD Trench Sheet 600 x 6mm thk x 2.5m
93.8kg
LSU12030 KD Trench Sheet 600 x 6mm thk x 3.0m
113kg
LSU12035 KD Trench Sheet 600 x 6mm thk x 3.5m
131kg
LSU12040 KD Trench Sheet 600 x 6mm thk x 4.0m
150kg
LSU12045 KD Trench Sheet 600 x 6mm thk x 4.5m
169kg
LSU12050 KD Trench Sheet 600 x 6mm thk x 5.0m
188kg
LSU12055 KD Trench Sheet 600 x 6mm thk x 5.5m
206kg
LSU12060 KD Trench Sheet 600 x 6mm thk x 6.0m
225kg
LSU12065 KD Trench Sheet 600 x 6mm thk x 6.5m
244kg
Overlapping KD Trench Sheet 600/6
Code Description Weight
VAU10030 Ancil Equip KKD Driving Cap 3.0kg
VAU10024 Ancil Equip Pile Pitching Shackle - 6T 17.0kg
VAU10027 Ancil Equip Trench Sheet Extractor - 6T 16.0kg
KD 600/6 Associated Ancillaries
Code Description Weight
LSU13020 KD Trench Sheet 600 x 8mm thk x 2.0m
100kg
LSU13025 KD Trench Sheet 600 x 8mm thk x 2.5m
125kg
LSU13030 KD Trench Sheet 600 x 8mm thk x 3.0m
150kg
LSU13035 KD Trench Sheet 600 x 8mm thk x 3.5m
175kg
LSU13040 KD Trench Sheet 600 x 8mm thk x 4.0m
200kg
LSU13045 KD Trench Sheet 600 x 8mm thk x 4.5m
225kg
LSU13050 KD Trench Sheet 600 x 8mm thk x 5.0m
250kg
LSU13055 KD Trench Sheet 600 x 8mm thk x 5.5m
275kg
LSU13060 KD Trench Sheet 600 x 8mm thk x 6.0m
300kg
LSU13065 KD Trench Sheet 600 x 8mm thk x 6.5m
325kg
LSU13070 KD Trench Sheet 600 x 8mm thk x 7.0m
350kg
LSU13080 KD Trench Sheet 600 x 8mm thk x 7.5m
400kg
Overlapping KD Trench Sheet 600/8
Code Description Weight
VAU10030 Ancil Equip KKD Driving Cap 3.0kg
VAU10024 Ancil Equip Pile Pitching Shackle - 6T 17.0kg
VAU10027 Ancil Equip Trench Sheet Extractor - 6T 16.0kg
KD 600/8 Associated Ancillaries
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
6
ServicesOur service sets us apart...
With over 85 years of experience in the temporary works industry we understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference.
Sales SupportOur sales team comprises a vast wealth of experience in the sector, helping us to understand your challenges and the opportunities to save you time and money.
Engineered DrawingsYou will be provided with technical recommendations and layout drawings showing a level of detail sufficient to enable straight forward on-site erection. For specifically fabricated items comprehensive operating instructions will be provided.
Customer ServiceWe work with customers on all scale of projects and as such recognise that your requirements are all different. We provide a level of customer service to suit your requirements ranging from on site training to simple reordering of replacement parts.
Technical ExpertiseEvery project, large or small, requires unique system design. Our highly skilled team of engineers and technical experts will understand first your requirements, and provide a solution designed to exceed these. We do this through approaching projects with an open mind and a desire to provide the most appropriate solution.
SafetyRMD Kwikform prides itself on the inherent safety of our products and the solutions that we design. The construction industry's greatest asset is its people and we design schemes and solutions with this in mind at all times.
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
ContactsRMD KWIKFORM UNITED KINGDOMHEAD OFFICERMD Kwikform, Brickyard Road, Aldridge, Walsall, WS9 8BW, UKTel: +44 1922 743743Email: info@rmdkwikform.com
LONDON AND SOUTH EAST24 River Road, Barking, Essex, IG11 0DGTel: +44 1708 552975Fax: +44 1708 557048Email: info@rmdkwikform.com
MIDLANDSMidland Sales Centre,Stubbers Green Road, Aldridge, Walsall, WS9 8BLTel: +44 1922 450800Fax: +44 1922 450896Email: info@rmdkwikform.com
NORTH8 Peel Road, Skelmersdale, WN8 9PTTel: +44 1942 273815Fax: +44 1942 273819Email: info@rmdkwikform.com
SCOTLAND1650A London Road, Glasgow, G31 4QGTel: +44 141 554 7425Fax: +44 141 554 8392Email: info@rmdkwikform.com
WALES AND SOUTH WESTPenarth Road, Cardiff, Glamorgan, CF11 8UPTel: +44 29 2037 4521Fax: +44 29 2023 8703Email: info@rmdkwikform.com
WETHERBYUnit 608, Thorpe Arch Estate, Wetherby, West YorkshireTel: +44 1937 229402Email: info@rmdkwikform.com
WORLDWIDE CONTACTSRMD AUSTRALIATel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: rmd.australia@rmdformwork.com
RMD NEW ZEALANDTel: Tel: 9 259 0353Fax: Fax: 9 276 6732Email: rmd.auckland@rmdformwork.com
RMD KWIKFORM HONG KONGTel: +852 2415 4882Fax: +852 2745 0232Email: rmd.hongkong@rmdkwikform.com
RMD KWIKFORM ASIA PACIFICTel: +63 917 5266760Email: hamish.bowden@rmdkwikform.com
RMD KWIKFORM PHILIPPINESTel: +632 696 7635Fax: +632 661 6456Email: rmd.manila@rmdkwikform.com
RMD KWIKFORM UAETel: +971 6 553 4173Fax: +971 6 553 4327Email: rmd.uae@rmdkwikform.com
RMD KWIKFORM QATARTel: +974 4465 3034Fax: +974 4465 3282Email: rmd.qatar@rmdkwikform.com
RMD KWIKFORM BAHRAINTel: +973 1738 2724Fax: +973 1738 2624Email: rmd.bahrain@rmdkwikform.com
RMD KWIKFORM OMANTel: +968 2413 7828Fax: +968 2413 7998Email: rmd.oman@rmdkwikform.com
RMD KWIKFORM SAUDI ARABIATel: +966 13 896 8665Fax: +966 13 896 8664Email: rmd.ksa@rmdkwikform.com
RMD KWIKFORM INDIATel: +91 44 6693 3300Email: rmd.india@rmdkwikform.com
RMD CHILETel: +56227149800Email: rmd.chile@rmd.cl
RMD KWIKFORM USATel: +1 303 252 7000Fax: +1 303 252 7319Email: usa@rmdkwikform.com
RMD KWIKFORM SOUTH AFRICATel: +27 12 004 1000Email: info.sa@rmdkwikform.com
RMD KWIKFORM IRELANDTel: +353 (0)1 830 2500Fax: +353 (0)1 830 2741Email: info@rmdkwikform.com
RMD KWIKFORM ESPAÑATel: +34 91 555 6104Fax: +34 91 555 4745Email: rmd.madrid@rmdkwikform.com
RMD KWIKFORM DBMETel: +973 1738 2724Fax: +973 1738 2624Email: rmd.me@rmdkwikform.com
RMD KWIKFORM PANAMATel: +507 280.0869Email: rmd.panama@rmdkwikform.com
RMD KWIKFORM COLOMBIATel: +57 321 214 71 18Email: rmd.bogota@rmdkwikform.com
Struts, Walers and Trench Sheets Trench lining system PRODUCT BROCHURE
www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.
The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.
An Interserve Company
Recommended