View
192
Download
21
Category
Preview:
Citation preview
Windows & Doors Standard Sizes
Version Four 2010
General information windows and doorsSizes This catalogue contains all Stegbars standard sizes for windows and doors. These are the ones that we make every day. They are performance rated and will be delivered in an advised lead time. They are sized to fit standard brick openings. Should you require one of our standard windows in a special size, its not a problem. Well work with you to ensure that the size you want maintains its rating performance, and can be delivered when you need it. Cedar Due to the natural colour variation in cedar, we cannot guarantee colour matching of timber components. Aluminium sections, including insect screens, locks, handles, winders and other hardware are finished in mahogany bronze powder coat as standard, except in Queensland where coffee powder coat is standard. Aluminium Available in a range of standard and custom colours. Black coloured locks, handles, winders and other hardware are fitted as standard. (Other colours are available). A.T. 2000 Series Black coloured locks, handles, winders and other hardware are fitted as standard. (Other colours are available). Other Aluminium cover plates (flashings) and aluminium angles are not supplied as standard, but are available on request. All Stegbar windows and doors shown in this Standard Sizes catalogue have been designed and glazed in accordance with relevant Australian Standards AS2047, AS1288 and AS2208 and conform to AS4055 for wind loads. The handing (which sash operates) can be reversed from what is shown in this catalogue. Glazing bars Colonial and Federation bar layouts are shown and other configurations are available on request. Insect screens Aluminium framed insect and safety screens are available in a standard range of colours to match aluminium and A.T. 2000 Series windows and doors. Cedar framed insect screens are supplied raw, ready for final sanding and finishing. Window and door codes All Stegbar codes for windows and doors follow a consistent format. The letters explain the type of material (the first letter) and the style of the window or door (the last two letters). And the numbers specify the height (the first two digits) and width (the last two digits). For example a CSW1314 is a Cedar Sliding Window which has a frame size of 1370mm high by 1450mm wide.
2
ContentsCodes When ordering products specify the material type in front of the product codes shown in this catalogue with either: A aluminium C cedar AT A.T. 2000 Series Product codes indicated are for products without additional features such as glazing bars, transom (unless indicated) or chair rail. If required insert the required variation codeHinge Vertical section Elevation
Window and door symbolsAwning top hungHinge
General information .............................. 2Door frame only
Measuring window and door frames ... 4 Bay window ........................................... 5 Curves, rakes and shapes ..................... 6 Glazing bars ........................................... 7 Sliding window ...................................... 8 Double hung window ........................... 9 Awning window .................................. 10
Casement side hung
Single door with sill
Single door no sill
Casement window............................... 11 Fixed window ...................................... 12 Bi-fold window .................................... 13 Bi-fold patio door ................................ 14 Sliding patio door ................................ 15 Stacking patio door ............................. 16
after the product code. CB colonial glazing bar FB federation glazing bar T transom CR chair rail (cedar only) For bi-fold windows and doors, entry and laundry units, and sliding doors additional codes are added after the product code to indicate specific product configurations. Example 2L2R after a bi-fold code indicates that its four panels, 2 open to the left and 2 open to the right (as seen from the outside). Example SR after an entry unit code indicates that the sidelite is on the right of the door (as seen from the outside). Example 3 after a sliding door code indicates that the sliding door has 3 panels.Horizontal section Horizontal section
Door frame plus doorElevation Hinge Hinge
Double hung vertical slidingMoving sash
Door frames ......................................... 17 Laundry combinations ........................ 18 Internal bi-fold door ............................ 19 Internal room dividers ......................... 19 Display centres ....................... Back page
Moving sash Vertical section Elevation
Single door with sill
Single door no sill
Sliding horizontal slidingMoving sash
Sliding door
Elevation
Single door
Sliding panel
3
Measuring window and door framesStandard Stegbar frame sizes match brick opening sizes. For all window and door materials the frame is measured on where it sits in the brick opening, as displayed in the illustrations below. Reveal thickness is not included in the frame size of revealed aluminium products. But the stud opening is bigger for revealed aluminium as indicated in the size charts.
All frame materialsHead beam Head beam Head beam
Revealed aluminiumHead beam
All frame materialsHead beam
Revealed aluminiumHead beam
He bea
REVEALED STUD OPENING
ALUMINIUM FRAME SIZE
REVEALED STUD OPENING
ALUMINIUM FRAME SIZE
BRICK COURSES
BRICK COURSES
BRICK COURSES
ALL FRAME SIZES
ALL FRAME SIZES
REVEALED STUD OPENING
ALUMINIUM FRAME SIZE
BRICK COURSES
BRICK COURSES
BRICK COURSES
STUD OPENING
STUD OPENING
ALL FRAME SIZES
Sill plate
Sill plate
Sill plate
Sill plate
The illustrations shown in this catalogue are based on brick veneer wall construction. Refer to the Stegbar Technical Manuals for specific building-in details of each product type and material. Horizontal and vertical cross sections are provided for various house constructions such as weatherboard and double brick. Available at stegbar.com.au
4
BRICK COURSES
STUD OPENING
Bay window general informationStegbar bay windows can be configured in cedar, aluminium or A.T. 2000 Series, using any of our standard window sizes. Our standard bay window is configured with a front that is parallel to the house and side wings at 135, though we can also do 90 and custom angles. A bay window can be constructed from many combinations of standard Stegbar windows. The most popular feature fixed panels combined with either awning, casement or double hung windows. Positioning of the operable windows will depend on your circumstances and functional requirements. Please ask your sales consultant about our bay window options.Casement/Fixed/Casement, with lowlite
Double hung/Fixed/Double hung
Fixed/Sliding/Fixed, with lowlite
5
Curves, rakes and geometric shapesStegbar curved windows are available as full, half and quarter circles, and as ellipses with and without upstands, in cedar, aluminium and A.T. 2000 Series. Raked windows are available with two or three parallel/ perpendicular sides. With a variety of geometric shapes also available the opportunity for you to create your own unique design is almost limitless. No matter which one you choose curve, rake or geometric shape they can be used as a free standing window to create a unique visual element or to complement the building design, or they can be attached to one of our standard windows to create an arched hi-lite. As configurations, building-in details, frame material type and the glass thickness all have an impact on the size limitations for curved, raked and shaped windows, a Stegbar sales consultant will help you choose the right shape in the right size so that you can rest easy with a window that will provide you with the performance and the look you require.
6
Glazing barsColonial glazing bar windowsUp to 600mm No horizontal bar
Federation glazing bar windows
Colonial bar exceptions
Up to 600mm One horizontal bar
Federation bar exceptions
601mm1030mm One horizontal bar
Double Hung windows 10311540 Three horizontal bars (including meeting rail)
Over 600mm Two horizontal bars
Double Hung windows up to 944 One horizontal bar (meeting rail not included)
1031mm1540mm Two horizontal bars Fixed & Sliding windows Over 1540 Three horizontal bars Double Hung windows Over 944 Two horizontal bars (meeting rail not included)
Over 1540mm Lowlite added
Lowlite No horizontal bar Lites up to 970 One vertical bar Lites over 970 Two vertical bars
Note Indicated colonial glazing bars may be replaced by a frame member in certain sizes (i.e. meeting rails and transoms).
Lowlite No horizontal bar
Lites up to 970 One vertical bar
Lites over 970 Two vertical bars
Colonial glazing bar doors
Federation glazing bar doors
All sash heights Three horizontal bars
All sash heights Two horizontal bars
Sashes up to 905 Sashes over 905 One vertical bar Two vertical bars
All sash widths Two vertical bars
7
Sliding window standard sizes2.5 666 630 610 7 666 630 600 3.0 786 750 730 3.5 906 870 850 4.0 1026 990 970 4.5 1146 1110 1090 5.0 1266 1230 1210 6.0 1506 1470 1450 6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 11.0 2706 2670 2650 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS
NoteSW0606 SW0607 SW0608 SW0609 SW0610 SW0612 SW0614 SW0615 SW0618 SW0621 SW0624 SW0626
All units are illustrated as viewed from outside. All dimensions are in mm. Two lite sliding windows are handed on the left as standard but can be reversed. Ask your sales consultant. Three lite sliding window sashes are proportioned as quarter/half/quarter in width but can be ordered as equal
9 838 802 772SW0706
SW0707
SW0708
SW0709
SW0710
SW0712
SW0714
SW0715
SW0718
SW0721
SW0724
SW0726
11 1010 974 944
SW0907
SW0908
SW0909
SW0910
SW0912
SW0914
SW0915
SW0918
SW0921
SW0924
SW0926
12 1096 1060 1030
SW1008
SW1009
SW1010
SW1012
SW1014
SW1015
SW1018
SW1021
SW1024
SW1026
14 1266 1230 1200
SW1209
SW1210
SW1212
SW1214
SW1215
SW1218
SW1221
SW1224
SW1226
widths. Ask your sales consultant.
16 1436 1400 1370
SW1310
SW1312
SW1314
SW1315
SW1318
SW1321
SW1324
SW1326
18 1606 1570 1540
SW1512
SW1514
SW1515
SW1518
SW1521
SW1524
SW1526
21 1866 1830 1800
1200
SW1809T
SW1810T
SW1812T
SW1814T
SW1815T
SW1818T
SW1821T
SW1824T
SW1826T
24 2124 2088 2058
1370
SW2010T
SW2012T
SW2014T
SW2015T
SW2018T
SW2021T
SW2024T
SW2026T
24.5 2166 2130 2100
1370
SW2110T
SW2112T
SW2114T
SW2115T
SW2118T
SW2121T
SW2124T
SW2126T
8
Double hung window standard sizes2.5 666 630 610 11 1010 974 944 3.0 786 750 730 3.5 906 870 850 4.0 1026 990 970 4.5 1146 1110 1090 5.0 1266 1230 1210 6.0 1506 1470 1450 6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 11.0 2706 2670 2650 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS
Note All units are illustrated as viewedDH0906 DH0907 DH0908 DH0909 DH0910 DH0912 DH0914 DH0915 DH0918 DH0921 DH0924 DH0926
12 1096 1060 1030
from outside. All dimensions are in mm. Available in cedar only is a tilt double hung, where both the top and bottom sashes are able to be tilted inwards.
DH1006
DH1007
DH1008
DH1009
DH1010
DH1012
DH1014
DH1015
DH1018
DH1021
DH1024
DH1026
14 1266 1230 1200DH1206
DH1207
DH1208
DH1209
DH1210
DH1212
DH1214
DH1215
DH1218
DH1221
DH1224
DH1226
Replace DH with TW if a tilt double hung window is required. Two and three lite double hung
16 1436 1400 1370DH1306
DH1307
DH1308
DH1309
DH1310
DH1312
DH1314
DH1315
DH1318
DH1321
DH1324
DH1326
windows have the option of a division bar across the fixed lite. Ask your sales consultant.
18 1606 1570 1540DH1506
DH1507
DH1508
DH1509
DH1510
DH1512
DH1514
DH1515
DH1518
DH1521
DH1524
DH1526
Over 1800mm high double hung windows can be configured with a lowlite. Ask your sales consultant. Three lite double hung sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant. Windows with a shaded blue box have a 3 lite configuration for A.T. 2000 Series.
21 1866 1830 1800DH1806
DH1807
DH1808
DH1809
DH1810
DH1812
DH1814
DH1815
DH1818
DH1821
DH1824
DH1826
24 2124 2088 2058
DH2006
DH2007
DH2008
DH2009
DH2010
DH2012
DH2014
DH2015
DH2018
DH2021
DH2024
DH2026
24.5 2166 2130 2100
DH2106
DH2107
DH2108
DH2109
DH2110
DH2112
DH2114
DH2115
DH2118
DH2121
DH2124
DH2126
9
Awning window standard sizes2.5 666 630 610 7 666 630 600 3.0 786 750 730 3.5 906 870 850 4.0 1026 990 970 4.5 1146 1110 1090 5.0 1266 1230 1210 6.0 1506 1470 1450 6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 11.0 2706 2670 2650 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS
NoteAW0606 AW0607 AW0608 AW0609 AW0610 AW0612 AW0614 AW0615 AW0618 AW0621 AW0624 AW0626
All units are illustrated as viewed from outside. All dimensions are in mm. Three lite awning window sashes are proportioned equally in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant.
9 838 802 772AW0706
AW0707
AW0708
AW0709
AW0710
AW0712
AW0714
AW0715
AW0718
AW0721
AW0724
AW0726
11 1010 974 944AW0906
AW0907
AW0908
AW0909
AW0910
AW0912
AW0914
AW0915
AW0918
AW0921
AW0924
AW0926
12 1096 1060 1030AW1006
AW1007
AW1008
AW1009
AW1010
AW1012
AW1014
AW1015
AW1018
AW1021
AW1024
AW1026
14 1266 1230 1200
AW1206
AW1207
AW1208
AW1209
AW1210
AW1212
AW1214
AW1215
AW1218
AW1221
AW1224
AW1226
16 1436 1400 1370AW1306
AW1307
AW1308
AW1309
AW1310
AW1312
AW1314
AW1315
AW1318
AW1321
AW1324
AW1326
18 1606 1570 1540AW1506
AW1507
AW1508
AW1509
AW1510
AW1512
AW1514
AW1515
AW1518
AW1521
AW1524
AW1526
21 1866 1830 1800
1200
AW1806T
AW1807T
AW1808T
AW1809T
AW1810T
AW1812T
AW1814T
AW1815T
AW1818T
AW1821T
AW1824T
AW1826T
24 2124 2088 2058
1370
AW2006T
AW2007T
AW2008T
AW2009T
AW2010T
AW2012T
AW2014T
AW2015T
AW2018T
AW2021T
AW2024T
AW2026T
24.5 2166 2130 2100
1370
AW2106T
AW2107T
AW2108T
AW2109T
AW2110T
AW2112T
AW2114T
AW2115T
AW2118T
AW2121T
AW2124T
AW2126T
10
Casement window standard sizes2.5 666 630 610 7 666 630 600 3.0 786 750 730 3.5 906 870 850 4.0 1026 990 970 4.5 1146 1110 1090 5.0 1266 1230 1210 6.0 1506 1470 1450 6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 10.5 2586 2550 2530 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS
NoteCW0606 CW0607 CW0608 CW0609 CW0610 CW0612 CW0614 CW0615 CW0618 CW0621 CW0624 CW0625
All units are illustrated as viewed from outside. All dimensions are in mm. One and two lite casement windows are handed on the left as standard but can be reversed. Ask your sales consultant. The left and right sashes on a three lite casement window are handed to open out from the middle of the window towards the frame but can be reversed. Ask your sales consultant. Three lite casement window sashes are proportioned equally1200
9 838 802 772
CW0706
CW0707
CW0708
CW0709
CW0710
CW0712
CW0714
CW0715
CW0718
CW0721
CW0724
CW0725
11 1010 974 944
CW0906
CW0907
CW0908
CW0909
CW0910
CW0912
CW0914
CW0915
CW0918
CW0921
CW0924
CW0925
12 1096 1060 1030
CW1006
CW1007
CW1008
CW1009
CW1010
CW1012
CW1014
CW1015
CW1018
CW1021
CW1024
CW1025
14 1266 1230 1200CW1206
CW1207
CW1208
CW1209
CW1210
CW1212
CW1214
CW1215
CW1218
CW1221
CW1224
CW1225
16 1436 1400 1370CW1306
CW1307
CW1308
CW1309
CW1310
CW1312
CW1314
CW1315
CW1318
CW1321
CW1324
CW1325
18 1606 1570 1540CW1506
CW1507
CW1508
CW1509
CW1510
CW1512
CW1514
CW1515
CW1518
CW1521
CW1524
CW1525
21 1866 1830 1800
in width across the frame but can be ordered as quarter/half/quarter widths. Ask your sales consultant.
CW1806T
CW1807T
CW1808T
CW1809T
CW1810T
CW1812T
CW1814T
CW1815T
CW1818T
CW1821T
CW1824T
CW1825T
24 2124 2088 2058
1370
CW2006T
CW2007T
CW2008T
CW2009T
CW2010T
CW2012T
CW2014T
CW2015T
CW2018T
CW2021T
CW2024T
CW2025T
24.5 2166 2130 2100
1370
CW2106T
CW2107T
CW2108T
CW2109T
CW2110T
CW2112T
CW2114T
CW2115T
CW2118T
CW2121T
CW2124T
CW2125T
11
Fixed window standard sizes2.5 666 630 610 7 666 630 600 3.0 786 750 730 3.5 906 870 850 4.0 1026 990 970 4.5 1146 1110 1090 5.0 1266 1230 1210 6.0 1506 1470 1450 6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 11.0 2706 2670 2650 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS
NoteFW0606 FW0607 FW0608 FW0609 FW0610 FW0612 FW0614 FW0615 FW0618 FW0621 FW0624 FW0626
All units are illustrated as viewed from outside. All dimensions are in mm. Over 1800mm high fixed windows can be configured with a lowlite. Ask your sales consultant. Three lite fixed window sashes are proportioned equally in width across the frame but can be ordered as
9 838 802 772
FW0706
FW0707
FW0708
FW0709
FW0710
FW0712
FW0714
FW0715
FW0718
FW0721
FW0724
FW0726
11 1010 974 944
FW0906
FW0907
FW0908
FW0909
FW0910
FW0912
FW0914
FW0915
FW0918
FW0921
FW0924
FW0926
12 1096 1060 1030FW1006
FW1007
FW1008
FW1009
FW1010
FW1012
FW1014
FW1015
FW1018
FW1021
FW1024
FW1026
14 1266 1230 1200FW1206
FW1207
FW1208
FW1209
FW1210
FW1212
FW1214
FW1215
FW1218
FW1221
FW1224
FW1226
quarter/half/quarter widths. Ask your sales consultant.
16 1436 1400 1370FW1306
FW1307
FW1308
FW1309
FW1310
FW1312
FW1314
FW1315
FW1318
FW1321
FW1324
FW1326
18 1606 1570 1540FW1506
FW1507
FW1508
FW1509
FW1510
FW1512
FW1514
FW1515
FW1518
FW1521
FW1524
FW1526
21 1866 1830 1800FW1806
FW1807
FW1808
FW1809
FW1810
FW1812
FW1814
FW1815
FW1818
FW1821
FW1824
FW1826
24 2124 2088 2058FW2006
FW2007
FW2008
FW2009
FW2010
FW2012
FW2014
FW2015
FW2018
FW2021
FW2024
FW2026
24.5 2166 2130 2100FW2106
FW2107
FW2108
FW2109
FW2110
FW2112
FW2114
FW2115
FW2118
FW2121
FW2124
FW2126
12
Bi-fold window standard sizes4.0 990 970 5.0 1230 1210 6.0 1470 1450 7.5 1830 1810 8.0 1950 1930 10.5 2550 2530 NUMBER OF BRICKS STUD OPENING ALUMINIUM & CEDAR FRAME SIZE ALUMINIUM & CEDAR
Note11 964 944
All units are illustrated as viewed from outside.BW0909 BW0912 BW0914 BW0918 BW0919 BW0925
All dimensions are in mm. All bi-fold windows open to the outside. When ordering bi-fold windows Select the product code for the
14 1220 1200
BW1209
BW1212
BW1214
BW1218
BW1219
BW1225
bi-fold window size in the top chart. Choose the configuration from the bottom chart. Add the configuration code to the end of the size code e.g. ABW1519-2L2R.
18 1560 1540
BW1509
BW1512
BW1514
BW1518
BW1519
BW1525
Bi-fold window configurations2L 3L 4L 2R 3R 4R
2L2R
13
Bi-fold patio door standard sizes6.5 1534 1514 9.5 2258 2238 12.5 2982 2962 15.5 3706 3686 18.5 4430 4410 21.5 5154 5134 NUMBER OF BRICKS STUD OPENING ALL MATERIALS FRAME SIZE ALL MATERIALS NOT RECOMMENDED IN CEDAR AT 2100mm HIGH DUE TO LOW OPENING HEIGHT OF 1937mm.BD2115 BD2122 BD2129 BD2136 BD2144 BD2151
2120 2100
24.5
Note2163 2143 25
All units are illustrated as viewed from outside.BD2215 BD2222 BD2229 BD2236 BD2244 BD2251
All dimensions are in mm. All bi-fold doors open to the outside. When ordering bi-fold patio doors
2420 2400
Select the product code for the bi-fold door size in the top chart.BD2415 BD2422 BD2429 BD2436 BD2444 BD2451
28
Choose the configuration from the bottom chart. Add the configuration code
Bi-fold patio door configurations2L 3L 4L 5L 6L 7L 2R 3R 4R 5R 6R 7R
to the end of the size code e.g. ABD2449-3L3R. 8 panel ABD available on request. Retractable flyscreen available.
2L2R
2L3R
3L3R
4L3R
3L2R
2L4R
3L4R
4L2R
2L5R
5L2R
14
Sliding patio door standard sizes6.5 1626 1590 1570 7.5 1866 1830 1810 9.0 2226 2190 2170 10.0 2466 2430 2410 11.0 2740 2704 2684 13.0 3174 3138 3118 13.5 3280 3244 3224 15.0 3640 3604 3584 15.0 3654 3618 3598 NUMBER OF BRICKS STUD OPENING REVEALED ALUMINIUM STUD OPENING OTHER MATERIALS FRAME SIZE ALL MATERIALS NOT RECOMMENDED IN CEDAR AT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm.SD2015 SD2018 SD2021 SD2024 SD2026-3 SD2031-4 SD2032-3 SD2035-3 SD2035-4
24 2096
2078 2058
Note24.5 2138 2120 2100
All units are illustrated as viewed from outside.SD2115 SD2118 SD2121 SD2124 SD2126-3 SD2131-4 SD2132-3 SD2135-3 SD2135-4
All dimensions are in mm. Aluminium stud opening formulas Revealed aluminium stud opening dimensions do not include a reveal on the sill.
25 2181
2163 2143SD2215
SD2218
SD2221
SD2224
SD2226-3
SD2231-4
SD2232-3
SD2235-3
SD2235-4
Add 18mm to height of revealed aluminium stud opening for standard sill reveal or 38mm for
28 2438
2420 2400
hardwood sill. Doors with a shaded blue box areSD2415 SD2418 SD2421 SD2424 SD2426-3 SD2431-4 SD2432-3 SD2435-3 SD2435-4
not available in A.T. 2000 Series.
15
Stacking patio door standard sizes9.5 2380 2344 2324 11.0 2740 2704 2684 13.5 3280 3244 3224 19.0 4680 4644 4624 22.0 5400 5364 5344 26.5 6480 6444 6424 BRICK COURSES STUD OPENING REVEALED ALUMINIUM STUD OPENING ALUMINIUM & CEDAR FRAME SIZE ALUMINIUM & CEDAR NOT RECOMMENDED IN CEDAR AT 2058mm HIGH DUE TO LOW OPENING HEIGHT OF 1942mm.ST2023 ST2026 ST2032 ST2046 ST2053 ST2064
24 2096
2078 2058
Note24.5 2140 2120 2100
All units are illustrated as viewedST2123 ST2126 ST2132 ST2146 ST2153 ST2164
from outside. All dimensions are in mm. Aluminium stud opening formulas Revealed aluminium stud opening dimensions do not include a reveal on the sill. Add 18mm to height of revealed aluminium stud opening for standard sill reveal or 38mm for hardwood sill. Stacking doors not available in
25 2181
2163 2143
ST2223
ST2226
ST2232
ST2246
ST2253
ST2264
28 2438
2420 2400
ST2423
ST2426
ST2432
ST2446
ST2453
ST2464
A.T. 2000. 6424mm wide stacking doors with the shaded blue box are not available in cedar.
16
Door frames standard sizesDoor frames and entry units are sized to fit a standard 2040mm highx820mm wide door opening and may not always suit standard brick openings. Aluminium or A.T. 2000 Series frames and doors which cannot be trimmed should be fitted to the finished floor. An asterisk (*) indicates that the frame will fit an industry standard 400mm wide sidelite. To calculate the required stud opening size for revealed aluminium add 38mm to frame height and 56mm to frame width. To calculate the required stud opening size for cedar, aluminium and A.T. 2000 Series add 20mm to frame height and 20mm to frame width. Flat sill is also available on request for aluminium doors. The flat sill incorporates the sub sill as standard.
Door information Aluminium door Standard height 2040mm, width 820mm, thickness 37mm. Cedar traditional entry door Standard height 2040mm, width 820mm, thickness 38mm. MC cedar entry door Standard height 2040mm, width 820mm, thickness 44mm.
882 898 900NO SILL
1210 1210 1210
1210 1210 1210
1310
1307 1325 1336
1348 1348 1340
FRAME WIDTH 1348 1450 1348 1450 1340 1450
Cedar internal door1450 1450 1450 1520 1520 1520 1707 1725 1736 1792 1792 1780 A.T. 2000 ALUMINIUM TIMBER
Standard height 2040mm, width 820mm, thickness 33mm. See the Stegbar Timber Doors catalogue
1710
2079
2087 2090
Frame to suit pair of 620 rebated doors
Frame to suit pair of 620 doors with mushroom stop
*
*
Frame to suit pair of 820 rebated doors
Frame to suit pair of 820 doors with mushroom stop
for details on all sizes and styles available.* *
No-Sill options All no-sill frames are sized with 10mm clearance beneath a standard 2040mm high door to allow for weather seals.
DF2009
EU2012SL
EU2012SR
DF2013RB
DF2013MRS
EU2013SL
EU2013SR
EU2014SL
EU2014SR
EU2015SRL
DF2017RB
DF2017MRS
EU2017SRL
FRAME HEIGHT 2120
OPEN-IN WITH SILLFrame to suit pair of 620 rebated doors Frame to suit pair of 620 doors with mushroom stop Frame to suit pair of 820 rebated doors Frame to suit pair of 820 doors with mushroom stop
Aluminium Notes* *
2144 2120
*
*
Aluminium frame sizes are derived using a 2040mm high door and a sub-sill as standard. For flat sill options add 10mm
DF2109
EU2112SL
EU2112SR
DF2113RB
DF2113MRS
EU2113SL
EU2113SR
EU2114SL
EU2114SR
EU2115SRL
DF2117RB
DF2117MRS
EU2117SRL
OPEN-OUT WITH SILLFrame to suit pair of 620 rebated doors Frame to suit pair of 620 doors with mushroom stop Frame to suit pair of 820 rebated doors Frame to suit pair of 820 doors with mushroom stop
to open-out frame height.* *
2097
2114 2111
*
*
For open-in doors with flat sill, reduce frame height by 20mm.
DF2209
EU2212SL
EU2212SR
DF2213RB
DF2213MRS
EU2213SL
EU2213SR
EU2214SL
EU2214SR
EU2215SRL
DF2217RB
DF2217MRS
EU2217SRL
17
Laundry combinations standard sizesLaundry combinations are sized to fit a standard 2040mm highx820mm wide door opening. To calculate the required stud opening size for cedar, aluminium and A.T. 2000 Series add 20mm to frame height and 20mm to frame width. To calculate the required stud opening size for revealed aluminium add 38mm to frame height and 56mm to frame width. To calculate the required stud opening height for revealed aluminium using a 38mm hardwood sill add 76mm to frame height.
1434 1470 1450NO SILL944
FRAME WIDTH 1434 1794 1470 1830 1450 1810
1794 1830 1810
A.T. 2000 ALUMINIUM TIMBER
944
944
2079
2087 2090
LU2014L
LU2014R
LU2018L
LU2018R
OPEN-IN WITH SILL
FRAME HEIGHT 2120
944
944
944
2144 2120
LU2114L
LU2114R
LU2118L
LU2118R
OPEN-OUT WITH SILL944 944 944 944 LU2218L LU2218R
2097
2114 2111
LU2214L
LU2214R
18
944
944
Internal bi-fold door standard sizesStegbar internal bi-fold doors have a low profile head track for use when space is tight. Use for wardrobes, laundry or between rooms. 4 leaf internal bi-fold doors open in the middle and the doors stack to both jambs (2 each way). Internal bi-fold doors are available in two standard opening heights, 2078mm and 2378mm.305 FRAME WIDTH LEAF WIDTH 620 330 670 355 720 380 770 405 820 430 870 460 930 490 990 520 1050 2 LEAF
1240
1340
1440
1540
1640
1740
1860
1980
2100
4 LEAF
Internal room dividers standard sizesStegbar internal room dividers are available for standard frame heights of 2100mm and 2400mm, and must use an even number of door leaves. Frame height and width are finished opening sizes. Jambs are not supplied. Leaves can fold all to one side or a combination of pairs of leaves can be split to either side. See the Stegbar Timber Doors catalogue for details on the leaf styles available. The chart indicates the standard door leaf widths available and the corresponsing frame width depending on the number of leaves used.
307 1237 FRAME WIDTH 1850 2463 3076 3689
332 1337 2000 2663 3326 3989
357 1437 2150 2863 3576 4289
382 1537 2300 3063 3826 4589
407 1637 2450 3263 4076 4889
432 1737 2600 3463 4326 5189
462 1857 2780 3703 4626 5549
492 1977 2960 3943 4926 5909
522 2097 3140 4183 5226 6269 4 LEAF 6 LEAF 8 LEAF 10 LEAF 12 LEAF
LEAF WIDTH
19
Theres a Stegbar Display Centre near you
New South WalesAlbury 288 Townsend Street, Albury 2640 Batemans Bay Unit 2, 5 Cranebrooke Road Batemans Bay 2536 Chatswood 122-126 Victoria Avenue, Chatswood 2067 Erina Information and Selection Centre Shop 2, 208-210 The Entrance Road, Erina 2250 Lansvale 84-98 Hume Highway, Lansvale 2166 Lismore 558 Ballina Road, Goonellabah 2480 Moorebank Showerscreens and Wardrobes 3 Moorebank Avenue, Moorebank 2170 Newcastle 14 Northcott Drive, Kotara 2289 Taren Point 3/181 Taren Point Road, Taren Point 2229 Wollongong 259 Keira Street, Wollongong 2500
VictoriaAirport West 91 Matthews Avenue, Airport West 3042 Ballarat 40 Mair Street, Ballarat 3355 Bendigo 4 Contempo Court, Bendigo 3550 Geelong 137B Fyans Street, Geelong 3220 Rowville 949 Stud Road, Rowville 3178 Shepparton 81 Benalla Road, Shepparton 3630
QueenslandBundall 2/101 Ashmore Road, Bundall 4217 Hervey Bay 37 Main Street, Pialba 4655 Kedron 200 Gympie Road, Kedron 4031 Maroochydore 110 Sugar Road, Maroochydore 4558 Stones Corner Information and Selection Centre 76 Old Cleveland Road, Stones Corner 4120 Toowoomba Homemaker Centre 7/12 Prescott Street, Toowoomba 4350
South AustraliaPooraka 20-24 Williams Circuit, Pooraka 5095 Unley 119 Unley Road, Unley 5061
Western AustraliaBooragoon 3/491 Marmion Street, Booragoon 6154 Wangara 66 Prindiville Drive Corner Hartman Drive, Wangara 6065
TasmaniaLaunceston Home Ideas Centre Windows and doors on display only 262 York Street, Launceston 7250
ACT RegionFyshwick Home Ideas Centre 28 Collie Street, Fyshwick 2609 For further information freecall
1800 681 168
stegbar.com.au
For all product disclaimer and warranty information applicable to this catalogue and other Stegbar products please visit stegbar.com.au. Stegbar Pty Limited ACN 007 090 280 ABN 52 007 090 280 STEGBAR 2012. All rights reserved. Disegno STE10108
Recommended