Somerset Berkley Regional High School Robotics Engineering with LabView

Somerset Berkley Regional High School

Robotics Engineering with LabView

1. Engineering DesignCentral Concepts: Engineering design involves practical problem solving, research, development, and invention/innovation, and requires designing, drawing, building, testing, and redesigning. Students should demonstrate the ability to use the engineering design process to solve a problem or meet a challenge.

Ma.Science and Engineering Framework 2006

1.1 Identify and explain the steps of the engineering design process: identify the problem, research the problem, develop possible solutions, select the best possible solution(s), construct prototypes and/or models, test and evaluate, communicate the solutions, and redesign.

Identify the problem

Research the problem

Develop solutions

Select the best solutionConstruct a

prototype

Test andevaluate

Communicate thesolutions

Redesign

Ma.Science and Engineering Framework 2006

Step 1Identify the

problem

Write down the original problem here.Student - Design, build and program a robot to: climb a rope and descend safely without anything breaking.

Ma.Science and Engineering Framework 2006

Step 2Research the

problem

Explore other options via the internetStudent: List the internet sites that were helpful.Site 1_____________________Site 2_____________________Site 3 _____________________

What did you learn from your research?A ______________________B ______________________C ______________________

Ma.Science and Engineering Framework 2006

Ma.Science and Engineering Framework 2006

Step 3Develop solutions BRAINSTORM

COLLABORATION

Student : Share your ideas with your design team. List your ideas below.

1.To make it as light as possible.2.To have it be in 2 main parts.3. These parts will be the motors attached to the brick w/

the cables.

Step 4Select the best

Possible solution(s)

Student: Describe which solution(s) best meet the need orsolve the problem. Describe exactly what idea or mixture of ideas your design team decided on for the first robot prototype? Use the next slide for your response.

Ma.Science and Engineering Framework 2006

The Somerset Berkley writing rubric will be used for assessment.

Student : Skillfully and imaginatively describe what your firstprototype will look like.

Our robot will be a basic nxt brick connected to twomotors via 2 cables. This will lessen the weight of the robotso that is has less weight to pull up during the climb. It willalso have a touch sensor so when it hits the top it will startto slowly descend back down. That is how are robot will look like and why it will (hopefully) work.

Step 5Construct a prototype

Build a robot with your NXT lego kitCreate a computer program for your robot.

Ma.Science and Engineering Framework 2006

Use the next slide(s) for the digital pictures of your prototypes and computer programs.

1st Prototype picture and computer program

Step 5 evidence

Step 6Test and Evaluate

the solution(s)

1. Does your robot work?2. Did it perform as expected? 3. What changes are necessary for the robot and the program?4. Does it meet the original design constraints?5. Is it safe?6. Lab work- Modify your robot project and use the next slide to post a picture of your improved robot project.

Ma.Science and Engineering Framework 2006

1st modified prototype picture and computer program

Step 6 evidence

2nd modified prototype picture and computer program

Step 6 evidence

3rd modified prototype picture and computer program

Step 7Communicate the solution(s)

Ma.Science and Engineering Framework 2006

Provide the YouTube link of your video that showshow your robot meets the challenge.

https://www.youtube.com/watch?v=Td2hIlWn-eM

Redesign

Overhaul the solution(s) based on information gatheredduring testing and self-assessment activity.

Ma.Science and Engineering Framework 2006