View
238
Download
2
Category
Preview:
Citation preview
The new dimension for economic machining
Superline
Drilling
Special tooling SolutionS
Milling
Modular tooling systeMs
tool restoration service
Reaming pcd/pcbTapping/Thread milling/fluTeless Tapping
Countersinking/de-burning
8th EditionSuperline
Guhring Ltd.Castle Bromwich Business Park, Tameside Drive,Birmingham B35 7AG
Telephone: 0121 749 5544Fax: 0121 776 7224 www.guhring.co.uk
No liability can be accepted for printing errors or technical changes of any kind.Our Conditions of Sale and Terms of Payment apply. Available on request.
1118
-VII-
05 •
Pri
nte
d in
Ger
man
y •
2011
2 SuperLine
SuperLine is the optimal range of high-tech tools for machining the following operations• drilling• tapping• milling• reaming
What is superLine?
SL quality – offers highest accuracy and process reliability! This is the result of our major investment. Therefore the new manufacturing procedures have been implemented according to DIN ISO 9001 and VDA 6.4. This is what our employees are trained for.
All SL tools are produced in ultra fine Guhring carbide or carefully selected high performance high speed steel. Add to this a majority coating with our well proven, versatile multilayer FIRE coating or application orientated surface finishes from bright to TiCN or TiAlN nanoA.
The efficiency of tool material and coating complement the proven and tested cutting edge geometries.
… in quaLity
3SuperLine
We produce SL-tools in large batches on completely new precision grinding machines developed by us. The extremely high productivity achieved with this manufacturing concept brings cost advantages that are fully passed on to our customers. Added to the guaranteed high SL quality, you will gain cost-efficiency that cannot be matched.
… in cost-efficiency
… in avaiLabiLityExcellent availability of SL-tools from stock, i.e. call or fax today and apply tomorrow, this is our SL motto. It must be experienced to be believed – on a daily basis.
4 SuperLine
Wornregrinding recoating
We support our SL-tools beyond the initial sale and the successful application. We look after SL-tools for their entire life. Regrinding and recoating – all this is part of our service. And who is more competent than the tool manufacturer?!
The tools can be sent to us by courier or our own logistics service can collect and deliver the tools.
… in tooL LifeWe are convinced, that the SuperLine program is the best offer at the right time. Test the quality, compare the prices. Take advantage of the exceptional advantages of SuperLine.
5SuperLine
SL range summary
SL drillsSummary page 6Standard range page 14GuhringNavigator page 46
SL milling cuttersSummary page 8Standard range page 50GuhringNavigator page 70
SL taps and fluteless tapsSummary page 10Standard range page 74
Ordering possibilitiesStandard rangeTools from the standard range are illustrated in bold in this catalogue. For most cutting tasks they provide an extremely economical solution. They are available immediately.
Obsolete rangeProducts that have small or no demand are listed in our obsolete range and illustrated in light in the catalogue. They are available only as long as the product is in stock. If products from the obso-lete range are out of stock, production readiness with short delivery is provided in the form of a special tool order. Prices available on request.
Packaging detailTool group Standard Units per package
Solid carbide twist drills all DIN standards and Guhring standards
all sizes supplied 1 unit per package
Solid carbide milling cutters and reamers
all DIN standards and Guhring standards
all sizes supplied 1 unit per package
High speed steel twist drills DIN 1897DIN 338DIN 340
≤ 7.5 mm packed in units of 10 > 7.5 … 10.6 mm packed in units of 5 > 10.6 mm 1 unit per package
High speed steel taps and fluteless taps
DIN 371 ≤ M6 packed in units of 10> M6 1 unit per package
SL reamersSummary page 11Standard range page 83GuhringNavigator page 86
6 SuperLine
GuhringNavigator drilling tools 46
SL range summary
Ratio drills
3-flute Ratio drills
SL drills
Standard(DIN)
Type Shankform
Drilling depth
Tool illustration Toolmaterial
Carbidegrade
Surface Internal cooling
Ø-rangemm
Guhr. no.
Page
DIN6537short
RT100U HA
3 x D Carb.-UF K/P
– 3.00...20.00 5514 14
RT100U HE – 3.00...16.00 5614 14
RT100U HA 3.00...20.00 5510 14
RT100U HE 3.00...20.00 5610 14
RT100VA HA 3.00...20.00 8510 14
RT100VA HE 3.00...20.00 8610 14
DIN6537long
RT100U HA
5 x D Carb.-UF K/P
– 3.00...20.00 5515 18
RT100U HE – 3.00...16.00 5615 18
RT100U HA 3.00...20.00 5511 18
RT100U HE 3.00...20.00 5611 18
RT100VA 3.00...20.00 8511 18
RT100VA 3.00...20.00 8611 18
Guhring std.
RT100U
HA
7 x D Carb.-UF K/P
4.00...20.00 5512 23
HE 4.00...20.00 5612 23
Guhring std.
RT100HA 12 x D Carb.-UF K/P 4.00...20.00 5525 26
Guhring std.
RT150GG HA 10 x D Carb.-UF K 3.00...16.00 5513 29
DIN6537long
FT200 HA 5 x D Carb.-UF K – 3.00...20.00 5518 30
bright FIRE TiAlN nanoA tool with internal cooling
7SuperLine
GuhringNavigator drilling tools 46
Carbide twist drills
High speed steel twist drills
SL drills
Standard(DIN)
Type Shankform
Drilling depth
Tool illustration Toolmaterial
Carbidegrade
Surface Internal cooling
Ø-rangemm
Guhr. no.
Page
DIN 6539 N – 3 x D Carb.-UF K – 1.50…12.00 5516 32
Guhring std. N – 5 x D Carb.-UF K – 2.00...12.00 5517 33
bright TiN tool with internal cooling
DIN 1897
GU500 DZ – 3 x D HSCO – – 1.00…14.00 5524 34
GU500 DZ – 3 x D HSCO – – 1.00…14.00 5520 34
GT500 DZ – 3 x D PM HSS-E – – 1.00…14.00 5521 34
DIN338 N – 5 x D HSS – – 1.00…16.00 9651 37
DIN 338
GU500 DZ – 5 x D HSCO – – 1.00…14.00 5523 37
GU500 DZ – 5 x D HSCO – – 1.00…14.00 5519 37
GT500 DZ – 5 x D PM HSS-E – – 1.00…14.00 5522 37
DIN 340
GU500 DZ – 10 x D HSCO – – 1.00…14.00 5536 42
GU500 DZ – 10 x D HSCO – – 1.00…14.00 5537 42
DIN 338
GU500 DZ – 5 x D Sets of Guhring no. 5523 HSCO – – – 201 45
DIN 338 N – 5 x D Sets of Guhring no. 9651 HSS – – – 201 45
8 SuperLine
Ratio end mills RF 100
SL milling cutters
GuhringNavigator milling cutters 70
bright FIRE
Mini-Slot drills
Slot drills and ball nose slot drills (2-fluted)
Guhring std.short – N h10 3-
fluted Carb.-UF K/P 0.50...20.00 5573 55
Guhring std.short – N h10 3-
fluted Carb.-UF K/P 1.00...10.00 5574 56
DIN Form Type Tolerance on
cutting-Ø
Tool illustration No. of cutting edges
Tool material
Carbidegrade
Surface Ø-rangemm
Guhr. no.
Page
DIN 6537short HB N h10 4-
fluted Carb.-UF K/P 6.00...20.00 5534 51
DIN 6527 long HA N h10 4-
fluted Carb.-UF K/P 4.00...25.00 5735 52
DIN 6527 long HB N h10 4-
fluted Carb.-UF K/P 4.00...25.00 5535 52
Guhring std. HA N h10 4-fluted Carb.-UF K/P 10.00...25.00 5582 54
DIN 6527 long HA N h10 2-
fluted Carb.-UF K/P 0.50...20.00 5585 57
DIN 6527 long HB N h10 2-
fluted Carb.-UF K/P 4.00...12.00 5533 57
DIN 6527 long HA N h10 2-
fluted Carb.-UF K/P 2.00...20.00 5730 58
DIN 6527 long HB N h10 2-
fluted Carb.-UF K/P 2.00...20.00 5530 58
Guhring std. HA N h10 2-fluted Carb.-UF K/P 3.00...20.00 5549 59
DIN 6527 short HA W e8 2-
fluted Carb.-UF K 3.00...20.00 5742 59
DIN 6527 short HB W e8 2-
fluted Carb.-UF K 3.00...20.00 5542 59
DIN 6527 long HA W e8 2-
fluted Carb.-UF K 3.00...20.00 5743 60
DIN 6527 long HB W e8 2-
fluted Carb.-UF K 3.00...20.00 5543 60
SL range summary
9SuperLine
Slot drills (3-fluted)
End mills
SL milling cutters
bright FIRE
GuhringNavigator milling cutters 70
DIN Form Type Tolerance on
cutting-Ø
Tool illustration No. of cutting edges
Tool material
Carbidegrade
Surface Ø-rangemm
Guhr. no Page
DIN 6527 short HA NH h10 3-
fluted Carb.-UF K/P 3.00...20.00 5505 61
DIN 6527 short HB NH h10 3-
fluted Carb.-UF K/P 3.00...20.00 5502 61
DIN 6527 long HA N h10 3-
fluted Carb.-UF K/P 2.00...20.00 5507 62
DIN 6527 long HB N h10 3-
fluted Carb.-UF K/P 2.00...20.00 5531 62
DIN 6527 long HA NH h10 3-
fluted Carb.-UF K/P 3.00...20.00 5506 63
DIN 6527 long HB NH h10 3-
fluted Carb.-UF K/P 3.00...20.00 5546 63
DIN 6527 long HB WR h10 3-
fluted Carb.-UF K 8.00...20.00 5544 63
DIN 6527 long HB N h10 4-
fluted Carb.-UF K/P 3.00...20.00 5584 64
DIN 6527 long HB N h10 4-
fluted Carb.-UF K/P 2.00...20.00 5532 65
Guhring std.short HA N h10 4-
fluted Carb.-UF K/P 3.00...20.00 5556 66
DIN 6527 long HA NH h10 multi-
fluted Carb.-UF K/P 3.00...25.00 5745 67
DIN 6527 long HB NH h10 multi-
fluted Carb.-UF K/P 6.00...20.00 5545 67
Guhring std. HA NH h10 multi-fluted Carb.-UF K/P 6.00...20.00 5729 68
Guhring std. HB NH h10 multi-fluted Carb.-UF K/P 6.00...20.00 5529 68
DIN 6527 long HB NRf h10 4-
fluted Carb.-UF K/P 6.00...20.00 5504 69
DIN 6527 long HB HR h10 4-
fluted DK 500-UF K/P 6.00...20.00 5583 69
10 SuperLine
DIN Type Form Tolerance zone
Tool illustrationand colour ring code
Toolmaterial
Sur-face
Thread range
Guhring no.
Page
DIN371 N B ISO 2 / 6H HSS-E M3 … M10 5560 74
DIN371 N B ISO 2 / 6H HSS-E S M3 … M8 5590 74
DIN371 H B ISO 2 / 6H HSS-E M3 … M10 5558 74
DIN371 H B ISO 2 / 6H HSS-E C M3 … M10 5587 74
DIN371 VA B ISO 2 / 6H PM HSS-E M3 … M10 5559 74
DIN371 VA B ISO 2 / 6H HSS-E S M3 … M10 5588 74
DIN371 N B ISO 2 / 6H HSS-E M3 … M10 5561 75
DIN371 N B ISO 2 / 6H HSS-E S M3 … M10 5586 75
DIN371 Al B ISO 2 / 6H HSS-E M3 … M10 5557 75
DIN371 GG C ISO 2 / 6H HSS-E M3 … M10 5550 75
DIN371 GG C 6HX HSS-E A M3 … M10 5595 75
DIN376 N B ISO 2 / 6H HSS-E M12 … M20 5563 76
for through holes
SL machine taps
~DIN371 N C 6HX HSS-E S M3 … M10 5598 77
~DIN376 N C 6HX
HSS-E S M12 … M16 5599 78
SCAbright steam tempered nitrided TiAIN TiCN TiN
SL Fluteless Taps for through and blind holes
SL range summary
11SuperLine
for blind holes
SL machine taps
for cast-materials
for Al and Al-alloys
for high tensile mat. 800...1200 N/mm2
for stainless andacid resistant steels
for general steels≤ 800 N/mm2
for universal applications≤ 1000 N/mm2
DINs Type Form Tolerance zone
Tool illustrationand colour ring code
Toolmaterial
Sur-face
Thread range
Guhring no.
Page
DIN371 N R40 C ISO 2 / 6H HSS-E M3 … M10 5554 79
DIN371 N R40 C ISO 2 / 6H HSS-E S M3 … M10 5592 79
DIN371 N R40 C ISO 2 / 6H HSS-E M3 … M10 5552 79
DIN371 N R40 C ISO 2 / 6H HSS-E C M3 … M8 5591 79
DIN371 VA R40 C ISO 2 / 6H HSS-E M3 … M10 5553 80
DIN371 VA R40 C ISO 2 / 6H HSS-E S M3 … M10 5596 80
DIN371 N R40 C ISO 2 / 6H HSS-E M3 … M10 5555 80
DIN371 N R40 C ISO 2 / 6H HSS-E S M3 … M10 5594 80
DIN371 Al R45 C ISO 2 / 6H HSS-E M3 … M10 5551 80
DIN376 N R40 C ISO 2 / 6H HSS-E M12 … M20 5589 81
DIN371 H C ISO 2 / 6H
IC ≥ M5
Carb.-UF M4 … M10 5593 82
Guhringstd. Carb.-UF 0.98 … 12.05 5527 83
SL reamers
12 SuperLine
SL program drilling tools range of application
Ratio drillsType RT 100 U Type RT 150 GG
For the drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to app. 1200 N/mm2, including carbon steels, bronze, cast iron and high-alloyed AlSi-alloys. Highest speed and feed rates possible (see Guroguide). High alignment accuracy with small diameter tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a concave cutting point geometry with special point geometry and web thinning.Pre-conditions for usePowerful machines, no play in spindle bearings, al ignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.Ratio drills with internal cooling are also available with straight shank but without whistle notch flats for the application in hydraulic chucks.
For the drilling of short-chipping materials such as cast iron, grey cast iron, spheroidal graphite and malleable cast iron, Al-alloys with high Si content. For the production of holes with high alignment accuracy (minimal deviation from straightness).The tools have extremely good self-centering qualities, achieve hole tolerances to H7 and produce an excellent surface finish. High cutting rates offer high productivity.
Ratio drills
Ratio drills Ratio drillsType RT 100 VA Type RT 100 12 x D
For the production of accurate holes in stainless steels with highest cutting rates and long tool life, Guhring has developed the new RT 100 VA. The RT 100 VA achieves its extraordinary efficiency thanks to• carbide developed for the machining of
stainless steels• the TiAlN nanoA wear resistant coating• tool geometry perfected for the machining of
stainless steelsIn addition, the high feed rates achievable with the RT 100 VA are thanks to the optimal heat dissipation via the chips.Additionally the highly effective coolant supply via the internal coolant ducts, having maximum cross section, supports the heat dissipation as well as chip evacuation and also counteracts the risk of localised hardening.
A high performance solid carbide drill for the efficient production of deep holes in steel, cast iron and non-ferrous metals. Excellent self-centering qualities thanks to special point grind. Provides safe chip flow even with tough and long-chipping materials due to adapted drill profile and large flute space. Double margins for excellent hole alignment and with good surface qualities and optimal support of the tool during withdrawal.
Pre-conditions for usePowerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatter-free, mechanical feeds.The drills, 12 x D with internal cooling, are available with straight shank and without drive flat for the application with hydraulic chucks and shrink fit chucks.
13SuperLine
High speed steel twist drillsType GT 500 DZ
The new GT 500 drill has been especially designed for the machining of high tensile steels and is produced in highly efficient PM-steel. By combining the advantages of high speed steel drills with those of solid carbide drills, it closes the gap that has existed for the machining of medium tensile steels and medium batch sizes.
3-fluted Ratio drills
Solid carbide twist drills
High speed steel twist drillsType FT 200
Type N
Type GU 500 DZ
A tool for drilling from the solid, achieving holes with excellent positional and form accuracy. Dimensional accuracy and surface finish correspond to those achieved with core drills. Centering or spotting is not normally required. Suitable for drilling cast iron and long-chipping Al-alloys. The 3-fluted FT 200 enables very high feed rates and optimal centering for the machining of cast iron and aluminium. The open flute form in conjunction with the short compact design, as well as our ultra fine carbide grade achieve maximum process reliability and enable applications under the most difficult of conditions, as for example oblique entry or interrupted drilling.
The tools are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and nonferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands. The extremely rigid, extra short SL twist drill (Guhring no. 5516) is furthermore especially recommended for the application on CNC machines and capstan lathes.
For all those multiple machining tasks generally requiring the application of different drills, Guhring has introduced a universal drill, GU 500.GU 500 is suitable for the machining of non-ferrous metals, structural steels and carbon steels, high-alloyed steels, cast iron and cast alloys, plastics as well as aluminium.
14 SuperLine
3.00 6 62 20 363.10 | | | |
1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | | | |3.40 | | | |3.50 | | | |
9/64 3.57 | | | |3.60 | | | |3.70 | 62 20 |3.80 | 66 24 |3.90 | | | |
5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |
11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | | 24 |
3/16 4.76 | | 28 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |
13/64 5.16 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.55 | | | |
7/32 5.56 | | | |5.60 | | | |5.70 | | | |5.80 | | | |5.90 | | | |
15/64 5.95 | | | |6.00 6 66 28 28
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5514 5614 5510 5610 8510 8610
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 3 x D 3 x D 3 x D 3 x D 3 x D 3 x D
Coolant ducts – –
Ø-range mm
3.00 … 6.00
l1
d1d2
l2l3
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
SL program Drilling Tools
Ratio drills, right-hand cutting DIN 6537 short
FIRE TiAlN nanoA tool with internal cooling
23.10 24.10 29.15 30.03 57.57 59.2623.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 29.15 30.03 61.76 63.4323.10 24.10 31.54 32.94 62.58 65.0823.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 62.58 65.0823.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 66.74 69.2623.10 24.10 31.54 32.94 62.58 65.08
16.00
15SuperLine
6.10 8 79 34 366.20 | | | |6.30 | | | |
1/4 6.35 | | | |6.40 | | | |6.50 | | | |6.60 | | | |6.70 | | | |
17/64 6.75 | | | |6.80 | | | |6.90 | | | |7.00 | | 34 |7.10 | | 41 |
9/32 7.14 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |
19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |
5/16 7.94 | | | |8.00 8 79 41 368.10 10 89 47 408.20 | | | |8.30 | | | |
21/64 8.33 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |
11/32 8.73 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |
23/64 9.13 | | | |9.20 | | | |9.25 | | | |9.30 10 89 47 40
Regrinding and
recoating
Net priceper piece
Ratio drills, right-hand cutting DIN 6537 shortTool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5514 5614 5510 5610 8510 8610
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 3 x D 3 x D 3 x D 3 x D 3 x D 3 x D
Coolant ducts – –
Ø-range mm
6.10 … 9.30
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
23.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 72.59 75.9423.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 78.44 80.9223.10 24.10 42.78 44.67 72.59 75.9425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 83.46 86.7725.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.14
20.16
16 SuperLine16
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5514 5614 5510 5610 8510 8610
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 3 x D 3 x D 3 x D 3 x D 3 x D 3 x D
Coolant ducts – –
Ø-range mm
9.40 … 12.80
l1
d1d2
l2l3
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
SL program Drilling Tools
Ratio drills, right-hand cutting DIN 6537 short
FIRE TiAlN nanoA tool with internal cooling
9.40 10 89 47 409.50 | | | |
3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 | | | |9.90 | | | |
25/64 9.92 | | | |10.00 10 89 47 4010.10 12 102 55 4510.20 | | | |10.30 | | | |
13/32 10.32 | | | |10.40 | | | |10.50 | | | |10.60 | | | |10.70 | | | |
27/64 10.72 | | | |10.80 | | | |10.90 | | | |11.00 | | | |11.10 | | | |
7/16 11.11 | | | |11.20 | | | |11.30 | | | |11.40 | | | |11.50 | | | |
29/64 11.51 | | | |11.60 | | | |11.70 | | | |11.80 | | | |11.90 | | | |
15/32 11.91 | | | |12.00 12 102 55 |12.10 14 107 60 |12.20 | | | |
31/64 12.30 | | | |12.40 | | | |12.50 | | | |12.60 | | | |
1/2 12.70 | | | |12.80 14 107 60 45
25.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 90.94 95.1425.88 27.39 47.96 49.85 82.10 86.7738.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.5638.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 117.65 121.0038.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.6538.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 125.99 129.3238.62 40.26 68.65 71.56 117.65 121.0051.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.8151.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.81 160.20 168.54
20.16
33.50
17SuperLine 17
Regrinding and
recoating
Net priceper piece
Ratio drills, right-hand cutting DIN 6537 shortTool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5514 5614 5510 5610 8510 8610
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 3 x D 3 x D 3 x D 3 x D 3 x D 3 x D
Coolant ducts – –
Ø-range mm
12.90 … 20.00
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
12.90 14 107 60 4513.00 | | | |
33/64 13.10 | | | |13.20 | | | |13.30 | | | |13.40 | | | |13.50 | | | |13.60 | | | |13.70 | | | |13.80 | | | |13.90 | | | |14.00 14 107 60 4514.10 16 115 65 4814.20 | | | |
9/16 14.29 | | | |14.30 | | | |14.40 | | | |14.50 | | | |14.60 | | | |14.70 | | | |14.80 | | | |14.90 | | | |15.00 | | | |15.10 | | | |15.20 | | | |15.30 | | | |15.40 | | | |15.50 | | | |15.60 | | | |15.70 | | | |15.80 | | | |
5/8 15.87 | | | |15.90 | | | |16.00 16 115 65 |16.50 18 123 73 |17.00 | | | |17.50 | | | |18.00 18 123 73 4818.50 20 131 79 5019.00 | | | |19.50 | | | |20.00 20 131 79 50
95.90 99.8151.87 53.76 95.90 99.81 149.36 156.8751.87 53.76 95.90 99.8151.87 53.76 95.90 99.8151.87 53.76 95.90 99.81 160.20 168.54
95.90 99.8151.87 53.76 95.90 99.81 160.20 168.54
95.90 99.8151.87 53.76 95.90 99.81 160.20 168.5451.87 53.76 95.90 99.81
95.90 99.8151.87 53.76 95.90 99.81 149.36 156.8766.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28
117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28
117.10 121.89117.10 121.89 196.94
66.76 69.53 117.10 121.89 185.21 193.5866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.28
117.10 121.89 196.94 205.28117.10 121.89
66.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89 196.94 205.2866.76 69.53 117.10 121.8966.76 69.53 117.10 121.89
117.10 121.8966.76 69.53 117.10 121.89 185.21 193.58
143.98 153.79 188.14 195.71 285.39 293.71143.98 153.79 188.14 195.71 256.99 273.67143.98 153.79 188.14 195.71 285.39 293.71143.98 153.79 188.14 195.71 256.99 273.67157.06 166.85 205.55 213.63 355.47 368.80157.06 166.85 205.55 213.63 337.10 350.45157.06 166.85 205.55 213.63 355.47 368.80157.06 166.85 205.55 213.63 337.10 350.45
33.50
46.84
18 SuperLine
DIN 6537 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5515 5615 5511 5611 8511 8611
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 5 x D 5 x D 5 x D 5 x D 5 x D 5 x D
Coolant ducts – –
Ø-range mm
3.00 … 5.56
l1
d1 d2
l2 l3
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
SL program Drilling Tools
Ratio drills, right-hand cutting
FIRE TiAlN nanoA tool with internal cooling
3.00 6 66 28 363.10 | | | |
1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | | | |3.40 | | | |3.50 | | | |
9/64 3.57 | | | |3.60 | | | |3.70 | 66 28 |3.80 | 74 36 |3.90 | | | |
5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |
11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | 74 36 |
3/16 4.76 | 82 44 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |
13/64 5.16 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.55 | | | |
7/32 5.56 6 82 44 36
26.38 27.89 37.59 38.74 70.10 71.7426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 37.59 38.74 74.24 75.9426.38 27.89 40.37 42.39 75.94 78.4426.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 75.94 78.4426.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.59
16.00
19SuperLine
Regrinding and
recoating
Net priceper piece
DIN 6537 longTool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5515 5615 5511 5611 8511 8611
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 5 x D 5 x D 5 x D 5 x D 5 x D 5 x D
Coolant ducts – –
Ø-range mm
5.60 … 8.40
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
Ratio drills, right-hand cutting
5.60 6 82 44 365.70 | | | |5.80 | | | |5.90 | | | |
15/64 5.95 | | | |6.00 6 82 44 |6.10 8 91 53 |6.20 | | | |6.30 | | | |
1/4 6.35 | | | |6.40 | | | |6.50 | | | |6.60 | | | |6.70 | | | |
17/64 6.75 | | | |6.80 | | | |6.90 | | | |7.00 | | | |7.10 | | | |
9/32 7.14 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |
19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |
5/16 7.94 | | | |8.00 8 91 53 368.10 10 103 61 408.20 | | | |8.30 | | | |
21/64 8.33 | | | |8.40 10 103 61 40
26.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 80.12 82.5926.38 27.89 40.37 42.39 75.94 78.4426.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 88.44 90.9426.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 95.14 97.6126.75 28.78 44.67 46.68 88.44 90.9429.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.47
16.00
20.16
20 SuperLine
DIN 6537 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5515 5615 5511 5611 8511 8611
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 5 x D 5 x D 5 x D 5 x D 5 x D 5 x D
Coolant ducts – –
Ø-range mm
8.50 … 11.20
l1
d1 d2
l2 l3
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
SL program Drilling Tools
Ratio drills, right-hand cutting
FIRE TiAlN nanoA tool with internal cooling
8.50 10 103 61 408.60 | | | |8.70 | | | |
11/32 8.73 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |
23/64 9.13 | | | |9.20 | | | |9.25 | | | |9.30 | | | |9.40 | 89 47 |9.50 | 103 61 |
3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 | | | |9.90 | | | |
25/64 9.92 | | | |10.00 10 103 61 4010.10 12 118 71 4510.20 | | | |10.30 | | | |
13/32 10.32 | | | |10.40 | | | |10.50 | | | |10.60 | | | |10.70 | | | |
27/64 10.72 | | | |10.80 | | | |10.90 | | | |11.00 | | | |11.10 | | | |
7/16 11.11 | | | |11.20 12 118 71 45
29.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 101.81 104.3029.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 110.97 113.4729.66 31.94 51.23 53.63 101.81 104.3044.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.6144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 141.02 145.1744.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.21
20.16
33.50
21SuperLine
Regrinding and
recoating
Net priceper piece
DIN 6537 longTool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5515 5615 5511 5611 8511 8611
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 5 x D 5 x D 5 x D 5 x D 5 x D 5 x D
Coolant ducts – –
Ø-range mm
11.30 … 14.70
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
Ratio drills, right-hand cutting
11.30 12 118 71 4511.40 | | | |11.50 | | | |11.60 | | | |11.70 | | | |11.80 | | | |11.90 | | | |
15/32 11.91 | | | |12.00 12 118 71 |12.10 14 124 77 |12.20 | | | |
31/64 12.30 | | | |12.40 | | | |12.50 | | | |12.60 | | | |
1/2 12.70 | | | |12.80 | | | |12.90 | | | |13.00 | | | |
33/64 13.10 | | | |13.20 | | | |13.30 | | | |13.40 | | | |13.50 | | | |13.70 | | | |13.80 | | | |13.90 | | | |14.00 14 124 77 4514.10 16 133 83 4814.20 | | | |
9/16 14.29 | | | |14.30 | | | |14.40 | | | |14.50 | | | |14.60 | | | |14.70 16 133 83 48
44.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 151.86 155.2144.30 47.08 74.83 77.61 141.02 145.1758.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.9958.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.9958.30 62.58 100.69 104.99 193.58 201.91
100.69 104.99 193.58 201.91100.69 104.99
58.30 62.58 100.69 104.99 183.57 186.88100.69 104.99
58.30 62.5858.30 62.58 100.69 104.99 193.58 201.91
100.69 104.9958.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.99 193.58 201.9158.30 62.58 100.69 104.99
100.69 104.9958.30 62.58 100.69 104.99 183.57 186.8875.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33
124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33
33.50
22 SuperLine
14.80 16 133 83 4814.90 | | | |15.00 | | | |15.10 | | | |15.20 | | | |15.30 | | | |15.40 | | | |15.50 | | | |15.60 | | | |15.70 | | | |15.80 | | | |
5/8 15.87 | | | |15.90 | | | |16.00 16 133 83 |16.50 18 143 93 |16.67 | | | |17.00 | | | |17.50 | | | |18.00 18 143 93 4818.50 20 153 101 5019.00 | | | |19.05 | | | |19.50 | | | |20.00 20 151 101 50
SL program Drilling Tools
Ratio drills, right-hand cutting DIN 6537 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF Carbide-UF Carbide-UF
Carbide grade K/P K/P K/P
Guhring no. 5515 5615 5511 5611 8511 8611
Type RT 100 U RT 100 U RT 100 U RT 100 U RT 100 VA RT 100 VA
Shank form HA HE HA HE HA HE
Surface finish
Drilling depth 5 x D 5 x D 5 x D 5 x D 5 x D 5 x D
Coolant ducts – –
Ø-range mm
14.90 … 20.00
l1
d1 d2
l2 l3
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £ Unit price in £ Unit price in £
FIRE TiAlN nanoA tool with internal cooling
124.16124.16 129.34
75.84 81.01 124.16 129.34 221.96 226.9675.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.33
124.16 129.34 236.98 245.33124.16 129.34
75.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34 236.98 245.3375.84 81.01 124.16 129.3475.84 81.01 124.16 129.34
124.16 129.3475.84 81.01 124.16 129.34 221.96 226.96152.70 162.48 198.99 206.94 343.79 355.47
198.99 206.94152.70 162.48 198.99 206.94 317.07 327.09152.70 162.48 198.99 206.94 343.79 355.47152.70 162.48 198.99 206.94 433.91 450.57165.76 176.68 216.40 224.86 433.91 450.57165.76 176.68 216.40 224.86 402.20 412.22
216.40 224.86165.76 176.68 216.40 224.86 433.91 450.57165.76 176.68 216.40 224.86 402.20 412.22
33.50
46.84
23SuperLine
3.00 6 70 30 363.10 | | | |
1/8 3.17 | | | |3.20 | | | |3.25 | | | |3.30 | 70 35.5 |3.40 | 75 37.5 |3.50 | | | |
9/64 3.57 | | | |3.60 | | | |3.70 | | | |3.80 | | | |3.90 | | | |
5/32 3.97 | | | |4.00 | | | |4.10 | | | |4.20 | 75 37.5 |4.30 | 85 45 |
11/64 4.37 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.65 | | | |4.70 | 85 45 |
3/16 4.76 | 90 50 |4.80 | | | |4.90 | | | |5.00 | | | |5.10 | | | |
13/64 5.16 | | | |5.20 | | | |5.30 | 90 50 |5.40 | 97 57 |5.50 | | | |
7/32 5.56 | | | |5.70 | | | |5.80 | | | |5.90 | | | |
15/64 5.95 | | | |6.00 6 97 57 |6.20 8 106 66 366.30 8 106 66 36
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5512 5612
Type RT 100 U RT 100 U
Shank form HA HE
Surface finish
Drilling depth 7 x D 7 x D
Coolant ducts
Ø-range mm
3.00 … 6.30
l1
d2
l3
d1
l2
t max
tmax = l2-1,5 x d1
Diameter Lengthsnominal Ø
d1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £
Ratio drills, right-hand cutting Guhring std.
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.62 96.90
92.6292.62 96.90
92.62 96.90
92.62 96.9092.6292.62 96.90
112.05 117.10112.05 117.10
16.00
20.16
24 SuperLine
1/4 6.35 8 106 66 666.50 | | | |6.60 | | | |6.70 | | | |6.80 | 106 66 |6.90 | 116 76 |7.00 | | | |7.10 | | | |7.20 | | | |7.40 | | | |7.50 | | | |
19/64 7.54 | | | |7.60 | | | |7.70 | | | |7.80 | | | |
5/16 7.94 | | | |8.00 8 116 76 368.10 10 131 87 408.20 | | | |
21/64 8.33 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |
11/32 8.73 | | | |8.80 | | | |9.00 | 131 87 |9.10 | 139 95 |
23/64 9.13 | | | |9.20 | | | |9.30 | | | |9.40 | | | |9.50 | | | |
3/8 9.52 | | | |9.70 | | | |9.80 | | | |
25/64 9.92 | | | | 9.90 | | | |10.00 10 139 95 4010.20 12 155 106 4510.30 | | | |
13/32 10.32 12 155 106 45
SL program Drilling Tools
FIRE with coolant ducts
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5512 5612
Type RT 100 U RT 100 U
Shank form HA HE
Surface finish
Drilling depth 7 x D 7 x D
Coolant ducts
Ø-range mm
6.35 … 10.32
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £
Ratio drills, right-hand cutting Guhring std.
112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05 117.10112.05112.05 117.10112.05112.05 117.10112.05 117.10112.05 117.10112.05112.05 117.10136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27 142.83136.27136.27 142.83136.27 142.83180.82 187.39180.82 187.39180.82
20.16
33.50
25SuperLine
10.50 12 155 106 4527/64 10.72 | | | |
10.80 | | | |11.00 | 155 106 |
7/16 11.11 | 163 114 |11.20 | | | |11.50 | | | |11.80 | | | |
15/32 11.91 | | | |12.00 12 163 114 |12.10 14 182 133 |12.20 | | | |
31/64 12.30 | | | |12.50 | | | |
1/2 12.70 | | | |13.00 | | | |13.10 | | | |13.50 | | | |14.00 14 182 133 4514.10 16 204 152 4814.20 | | | |
9/16 14.29 | | | |14.50 | | | |15.00 | | | |15.50 | | | |
5/8 15.87 | | | |16.00 16 204 152 |16.50 18 223 171 |17.00 | | | |17.50 | | | |18.00 18 223 171 4818.50 20 244 190 5019.00 | | | |
3/4 19.05 | | | |19.50 | | | |20.00 20 244 190 50
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5512 5612
Type RT 100 U RT 100 U
Shank form HA HE
Surface finish
Drilling depth 7 x D 7 x D
Coolant ducts
Ø-range mm
10.50 … 20.00
Diameter Lengths
nominal Ød1m7
shank Ød2
total length
flute length
shank length
inch mm mm l1 l2 l3 Unit price in £
Ratio drills, right-hand cutting Guhring std.
180.82 187.39180.82180.82 187.39180.82 187.39180.82180.82 187.39180.82 187.39180.82 187.39180.82180.82 187.39228.14 233.18228.14 233.18228.14228.14 233.18228.14 233.18228.14 233.18228.14228.14 233.18228.14 233.18286.06 288.09286.06 288.09286.06286.06 288.09286.06 288.09286.06 288.09286.06286.06 288.09357.60 361.01357.60 361.01357.60 361.01357.60 361.01419.81 424.73419.81 424.73419.81 424.73419.81 424.73419.81 424.73
33.50
46.84
26 SuperLine
3.00 6 90 50 363.10 | | | |
1/8 3.17 | | | |3.20 | | | |3.30 | | | |3.40 | | | |3.50 | | | |3.60 | | | |3.70 | 90 50 |3.80 | 102 64 |3.90 | | | |4.00 | | | |4.10 | | | |4.20 | | | |4.30 | | | |4.40 | | | |4.50 | | | |4.60 | | | |4.70 | 102 64 |4.80 | 116 78 |4.90 | | | |5.00 | | | |5.10 | | | |5.20 | | | |5.30 | | | |5.40 | | | |5.50 | | | |5.60 | | | |5.70 | | | |5.80 | | | |5.90 | | | |6.00 6 116 78 |6.10 8 146 78 |6.20 | | | |6.30 | | | |
1/4 6.35 8 146 108 36
Guhring std.
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5525
Type RT 100
Shank form HA
Surface finish
Drilling depth 12 x D
Coolant ducts
Ø-range mm
3.00 … 6.35
l1
d2
l3 d
1 l2
t max
tmax = l2-1,5 x d1
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
inch mm mm l1 l2 l3 Unit price in £
SL program Drilling Tools
Ratio drills, right-hand cutting
FIRE with coolant ducts
117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10117.10137.42137.42137.42137.42
17.44
21.37
27SuperLine
Guhring std.
6.40 8 146 108 366.50 | | | |6.60 | | | |6.70 | | | |6.80 | | | |6.90 | | | |7.00 | | | |7.10 | | | |7.20 | | | |7.30 | | | |7.40 | | | |7.50 | | | |7.60 | | | |7.70 | | | |7.80 | | | |7.90 | | | |8.00 8 146 108 368.10 10 162 120 408.20 | | | |8.30 | | | |8.40 | | | |8.50 | | | |8.60 | | | |8.70 | | | |8.80 | | | |8.90 | | | |9.00 | | | |9.10 | | | |9.20 | | | |9.30 | | | |9.40 | | | |9.50 | | | |
3/8 9.52 | | | |9.60 | | | |9.70 | | | |9.80 10 162 120 40
Ratio drills, right-hand cutting
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5525
Type RT 100
Shank form HA
Surface finish
Drilling depth 12 x D
Coolant ducts
Ø-range mm
6.40 … 9.80
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
inch mm mm l1 l2 l3 Unit price in £
137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42137.42174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01174.01
21.37
28 SuperLine
9.90 10 162 120 4010.00 10 162 120 4010.20 12 204 156 4510.50 | | | |11.00 | | | |11.50 | | | |12.00 12 204 156 |12.50 14 230 182 |
1/2 12.70 | | | |13.00 | | | |13.50 | | | |14.00 14 230 182 4514.50 16 260 208 4815.00 | | | |15.50 | | | |16.00 16 260 208 4816.50 18 285 234 |17.00 | | | |17.50 | | | |18.00 18 285 234 4818.50 20 310 258 5019.00 | | | |
3/4 19.05 | | | |19.50 | | | |20.00 20 310 258 50
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5525
Type RT 100
Shank form HA
Surface finish
Drilling depth 12 x D
Coolant ducts
Ø-range mm
9.90 … 20.00
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
inch mm mm l1 l2 l3 Unit price in £
Ratio drills, right-hand cutting Guhring std.
bright FIRE with coolant ducts
SL program Drilling Tools
174.01174.01227.77227.77227.77227.77227.77283.54283.54283.54283.54283.54402.14402.14402.14402.14447.95447.95447.95447.95638.61638.61638.61638.61638.61
21.37
34.83
48.72
29SuperLine
Ratio drills, right-hand cutting Guhring std.
Regrinding
Net priceper piece
3.00 6 91 42 361/8 3.17 | | | |
3.25 | | | |3.30 | | 42 |3.50 | | 48 |
9/64 3.57 | 91 48 |3.80 | 121 77 |
5/32 3.97 | | | |4.00 | | | |4.20 | | | |4.50 | | 77 |5.00 | | 82 |5.50 | | | |6.00 6 121 82 |
1/4 6.35 8 146 106 |6.50 | | | |6.80 | | | |7.00 | | | |7.50 | | | |7.80 | | | |8.00 8 146 106 368.50 10 175 130 409.00 | | | |9.50 | | | |
3/8 9.52 | | | |10.00 10 175 130 4010.20 12 209 159 4510.50 | | | |11.00 | | | |11.50 12 209 159 4512.00 12 209 159 4512.50 14 233 183 |
1/2 12.70 | | | |13.00 | | | |13.50 | | | |14.00 14 233 183 4514.50 16 260 207 4815.00 | | | |15.50 | | | |16.00 16 260 207 48
Tool material Carbide-UF
Carbide grade K
Guhring no. 5513
Type RT 150 GG
Shank form HA
Surface finish
Drilling depth 10 x D
Coolant ducts
Ø-range mm
3.00 … 16.00
l 1
l 2 l 3
d 1
d 2
t
tmax = l2-1,5 x d1
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
inch mm mm l1 l2 l3 Unit price in £
13.35
16.00
21.37
38.9938.9938.9938.9938.9938.9938.9938.9948.4648.4648.4648.4648.4648.4663.3563.3563.3563.3563.3563.3563.3579.6279.6279.6279.6279.6298.8198.8198.8198.8198.81131.48131.48131.48131.48131.48166.44166.44166.44166.44
30 SuperLine
3.00 6 66 28 363.10 | | | |3.20 | | | |3.30 | | | |3.50 | | | |3.70 | 66 28 |3.80 | 74 36 |4.00 | | | |4.10 | | | |4.20 | | | |4.50 | 74 36 |4.80 | 82 44 |5.00 | | | |5.10 | | | |5.20 | | | |5.30 | | | |5.50 | | | |5.80 | | | |6.00 6 82 44 |6.10 8 91 53 |6.20 | | | |6.40 | | | |6.50 | | | |6.70 | | | |6.80 | | | |7.00 | | | |7.10 | | | |7.40 | | | |7.50 | | | |7.80 | | | |8.00 8 91 53 368.10 10 103 61 408.20 | | | |8.40 | | | |8.50 | | | |8.60 10 103 61 40
Regrinding
Net priceper piece
Tool material Carbide-UF
Carbide grade K
Guhring no. 5518
Type FT200
Shank form HA
Surface finish
Drilling depth 5 x D
Coolant ducts –
Ø-range mm
3.00 … 8.60
l2
l1 d
1
d2
l3
tmax
tmax = l2-1,5 x d1
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
mm mm l1 l2 l3 Unit price in £
3-fluted Ratio drills, right-hand cutting DIN 6537 long
SL program Drilling Tools
bright
31.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2931.2937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5937.5943.0343.0343.0343.0343.03
13.35
16.00
31SuperLine
8.70 10 103 61 408.80 | | | |9.00 | | | |9.10 | | | |9.50 | | | |9.80 | | | |
10.00 10 103 61 4010.10 12 118 71 4510.20 | | | |10.30 | | | |10.50 | | | |11.00 | | | |11.20 | | | |11.50 | | | |11.80 | | | |12.00 12 118 71 |12.10 14 124 77 |12.50 | | | |13.00 | | | |13.50 | | | |14.00 14 124 77 4514.50 16 133 83 4815.00 | | | |15.50 16 133 83 |16.00 16 133 83 |16.50 18 143 93 |17.00 | | | |17.50 | | | |18.00 18 143 93 4818.50 20 153 101 5019.00 | | | |19.50 | | | |20.00 20 153 101 50
3-fluted Ratio drills, right-hand cutting DIN 6537 long
Regrinding
Net priceper piece
Tool material Carbide-UF
Carbide grade K
Guhring no. 5518
Type FT200
Shank form HA
Surface finish
Drilling depth 5 x D
Coolant ducts –
Ø-range mm
8.70 … 20.00
Diameter Lengths
nominal Ød1m7
shank Ød2
totallength
flutelength
shanklength
mm mm l1 l2 l3 Unit price in £
43.0343.0343.0343.0343.0343.0343.0363.2263.2263.2263.2263.2263.2263.2263.2263.2282.9182.9182.9182.9182.91102.34102.34102.34102.34158.62158.62158.62158.62214.25214.25214.25214.25
16.00
21.37
32 SuperLine
1.50 32 9 1.60 34 102.00 38 122.10 38 122.20 40 132.30 40 13
3/32 2.38 43 142.40 | |2.50 | |2.60 43 142.70 46 16
7/64 2.78 | |2.80 | |2.90 | |3.00 46 163.10 49 18
1/8 3.17 | |3.20 | |3.30 49 183.40 52 203.50 | |
9/64 3.57 | |3.60 | |3.70 52 203.80 55 223.90 | |
5/32 3.97 | |4.00 | |4.10 | |4.20 55 224.30 58 24
11/64 4.37 | |4.40 | |4.50 | |4.60 | |4.70 58 24
3/16 4.76 62 264.80 | |4.90 | |5.00 | |5.10 | |5.20 62 26
5.50 66 285.80 66 286.00 66 28
1/4 6.35 70 316.40 | |6.50 70 316.80 74 346.90 | |7.00 | |
9/32 7.14 | |7.50 74 34
5/16 7.94 79 378.00 | |8.50 79 378.60 84 40
11/32 8.73 | |8.80 | |9.00 | |9.50 84 40
10.00 89 4310.20 | |10.50 89 4311.00 95 47
7/16 11.11 | |11.50 95 47
15/32 11.91 102 5112.00 102 51
Stub drills, right-hand cutting DIN 6539Tool material Carbide-UF
Carbide grade K
Guhring no. 5516
Type N
Surface finish
Ø-range mm
1.50 … 5.20
Diameter Lengths
total fluteinch mm length length Unit price in £
Tool material Carbide-UF
Carbide grade K
Guhring no. 5516
Type N
Surface finish
Ø-range mm
5.50 … 12.00
Diameter Lengths
total fluteinch mm length length Unit price in £
SL program Drilling Tools
bright
3.283.283.283.283.283.283.283.283.283.284.804.804.804.804.804.804.804.804.805.055.055.445.445.445.945.945.945.946.446.446.446.446.446.446.447.067.067.067.067.06
12.629.09
9.099.599.5911.9923.7311.9915.0315.0314.3916.9116.9119.3019.3023.7324.4825.8825.8824.7326.7528.7833.1933.1936.7242.1442.1442.1442.14
33SuperLine
2.00 49 242.10 49 242.20 53 272.30 53 27
3/32 2.38 57 302.40 | |2.50 | |2.60 57 302.70 61 33
7/64 2.78 | |2.80 | |2.90 | |3.00 61 333.10 65 36
1/8 3.17 | |3.20 | |3.30 65 363.40 70 393.50 | |
9/64 3.57 | |3.60 | |3.70 70 393.80 75 433.90 | |
5/32 3.97 | |4.00 | |4.10 | |4.20 75 434.30 80 47
11/64 4.37 | |4.40 | |4.50 | |4.60 | |4.70 80 47
3/16 4.76 86 524.80 | |4.90 | |5.00 | |5.10 | |
13/64 5.16 86 525.50 93 57
7/32 5.56 93 57
15/64 5.95 93 576.00 93 57
1/4 6.35 101 636.50 101 636.80 109 696.90 | |7.00 | |
9/32 7.14 | |7.50 109 69
5/16 7.94 117 758.00 | |8.50 117 75
11/32 8.73 125 819.00 | |9.50 125 81
10.00 133 8710.20 | |10.50 133 8711.00 142 94
7/16 11.11 | |11.50 142 94
15/32 11.91 151 10112.00 151 101
Jobber drills, right-hand cutting Guhring std.Tool material Carbide-UF
Carbide grade K
Guhring no. 5517
Type N
Surface finish
Ø-range mm
2.00 … 5.56
Diameter Lengths
total fluteinch mm length length Unit price in £
Tool material Carbide-UF
Carbide grade K
Guhring no. 5517
Type N
Surface finish
Ø-range mm
5.95 … 12.00
Diameter Lengths
total fluteinch mm length length Unit price in £
4.044.675.055.055.055.055.057.067.067.067.067.066.446.446.446.446.447.467.067.967.967.967.967.967.967.968.338.3310.8510.8510.859.9811.4911.4911.4911.4911.4910.8523.1015.0315.0315.39
15.3915.3919.3019.3022.8522.8522.8525.8822.8529.2826.7531.2935.5832.1935.5839.6247.5845.9355.9159.3159.3159.3164.74
34 SuperLine
1.00 26 61.10 28 71.20 30 81.30 30 81.40 32 91.50 32 91.60 34 101.70 34 101.80 36 111.90 36 112.00 38 122.10 38 122.20 40 132.30 40 13
3/32 2.38 43 142.40 | |2.50 | |2.60 43 142.70 46 16
7/64 2.78 | |2.80 | |2.90 | |3.00 46 163.10 49 18
1/8 3.17 | |3.20 | |3.30 49 183.40 52 203.50 | |
9/64 3.57 | |3.60 | |3.70 52 203.80 55 223.90 | |
5/32 3.97 | |4.00 | |4.10 | |4.20 55 224.30 58 24
11/64 4.37 | |4.40 | |4.50 58 24
Tool material HSCO PM HSS-E
Guhring no. 5524 5520 5521
Type GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish
Ø-range mm
1.00 … 4.50
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £
SL program Drilling Tools
bright TiN
Stub drills, right-hand cutting DIN 1897
1.39 3.48 6.711.39 3.48 6.711.39 3.71 6.841.39 3.94 7.181.39 3.48 6.711.39 3.36 6.371.39 3.48 6.481.39 3.48 6.481.39 3.48 6.481.39 3.48 6.481.39 2.90 5.551.39 3.48 6.141.39 3.48 6.711.39 3.01 6.711.39 3.36 6.711.39 3.71 6.951.39 3.13 5.911.39 3.82 6.951.51 3.94 6.601.51 3.82 5.551.51 3.71 7.181.51 3.94 6.371.39 3.36 6.141.51 3.48 6.371.51 3.48 6.371.51 3.36 6.841.51 3.36 6.951.62 3.94 6.251.62 3.36 6.711.62 3.82 6.371.62 4.17 5.551.62 3.82 5.911.74 4.05 6.711.74 4.63 7.531.74 4.17 6.711.74 3.82 6.251.74 4.28 7.181.74 3.82 6.371.74 4.28 7.071.74 4.53 7.301.74 4.63 7.531.74 4.28 6.37
35SuperLine
Tool material HSCO PM HSS-E
Guhring no. 5524 5520 5521
Type GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish
Ø-range mm
4.60 … 8.00
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £
Stub drills, right-hand cutting
4.60 58 244.70 58 24
3/16 4.76 62 264.80 | |4.90 | |5.00 | |5.10 | |
13/64 5.16 | |5.20 | |5.30 62 265.40 66 285.50 | |
7/32 5.56 | |5.60 | |5.70 | |5.80 | |5.90 | |
15/64 5.95 | |6.00 66 286.10 70 316.20 | |6.30 | |
1/4 6.35 | |6.40 | |6.50 | |6.60 | |6.70 70 316.80 74 346.90 | |7.00 | |7.10 | |
9/32 7.14 | |7.20 | |7.30 | |7.40 | |7.50 74 347.60 79 377.70 | |7.80 | |7.90 | |
5/16 7.94 | |8.00 79 37
DIN 1897
1.74 4.28 7.991.74 4.63 7.531.74 4.76 7.531.74 4.86 8.111.74 4.86 8.221.74 4.17 6.951.85 4.53 7.181.85 4.76 7.411.85 4.86 8.341.85 5.09 7.992.08 5.45 8.681.97 4.63 7.412.21 5.09 8.912.21 5.55 8.912.21 5.91 9.392.21 5.68 9.622.21 5.91 9.392.21 5.55 9.032.08 4.99 7.882.44 5.91 9.262.44 5.91 9.262.44 6.25 9.722.44 6.25 9.622.44 6.25 9.622.32 5.91 8.112.55 6.48 10.192.55 6.71 10.543.01 7.18 9.493.01 7.07 11.243.01 6.60 12.393.71 7.99 13.663.71 8.11 13.083.71 8.11 13.553.71 8.11 13.553.71 8.22 13.663.13 6.84 12.974.05 8.80 14.484.05 8.80 14.484.05 8.80 12.394.05 8.80 14.484.05 8.34 15.633.36 8.11 13.55
36 SuperLine
Tool material HSCO PM HSS-E
Guhring no. 5524 5520 5521
Type GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish
Ø-range mm
8.10 … 14.00
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £
8.10 79 378.20 | |8.30 | |8.40 | |8.50 79 378.60 84 408.70 | |
11/32 8.73 | |8.80 | |9.00 | |9.30 | |9.50 84 409.80 89 43
10.00 | |10.20 | |10.40 | |10.50 89 4311.00 95 47
7/16 11.11 | |11.50 95 4712.00 102 5112.50 | |12.70 | |13.00 102 5113.50 107 5414.00 107 54
SL program Drilling Tools
bright TiN
Stub drills, right-hand cutting DIN 1897
4.05 10.42 17.144.05 10.77 17.714.05 11.00 18.064.05 11.00 18.063.48 9.49 15.056.14 11.93
14.824.76 10.65 16.444.76 11.93 21.194.05 9.62 16.565.09 11.00 24.774.53 10.65 19.915.68 12.62 21.425.09 10.42 19.116.60 13.20 28.148.55 13.206.60 12.51 27.217.64 14.02 27.218.80 14.94 32.078.80 16.10 28.719.16 15.63 33.0011.24 17.25 36.00
18.0613.20 17.25 36.0013.66 18.42 38.3314.25 22.81 47.59
37SuperLine
1.00 34 121.10 36 14
3/64 1.19 38 161.20 38 161.30 38 161.40 40 181.45 40 181.50 40 18
1/6 1.59 43 201.60 43 201.70 43 201.80 46 221.90 46 22
5/64 1.98 49 242.00 49 242.10 49 242.20 53 272.30 | |
3/32 2.38 53 272.40 57 302.50 | |2.60 57 302.70 61 33
7/64 2.78 | |2.80 | |2.90 | |3.00 61 333.10 65 36
1/8 3.17 | |3.20 | |3.30 65 363.40 70 393.50 | |
9/64 3.57 | |3.60 | |3.70 70 393.80 75 433.90 | |
5/32 3.97 | |4.00 | |4.10 | |4.20 75 43
Tool material HSS HSCO PM HSS-E
Guhring no. 9651 5523 5519 5522
Type N GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish Tip coated
Ø-range mm
1.00 … 4.20
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £
Jobber drills, right-hand cutting DIN 338
0.86 1.39 2.90 7.410.98 1.39 3.13 7.300.970.91 1.39 3.01 7.530.86 1.39 3.13 7.990.83 1.39 3.13 7.30
3.130.65 1.39 2.90 7.070.640.64 1.39 2.90 7.180.77 1.39 3.13 7.180.75 1.39 3.13 7.180.73 1.39 3.13 7.180.750.58 1.39 3.01 6.140.70 1.39 3.13 6.710.70 1.39 3.36 7.300.70 1.39 3.24 7.300.57 1.39 3.24 7.410.70 1.39 3.01 7.530.57 1.39 3.13 6.600.70 1.39 3.24 7.990.70 1.51 3.36 7.530.69 1.51 3.36 6.480.72 1.51 3.36 8.340.61 1.51 3.36 7.300.59 1.39 3.24 6.950.77 1.51 3.71 7.300.59 1.51 3.48 7.300.75 1.51 3.48 7.990.64 1.51 3.71 7.990.81 1.62 3.94 7.180.65 1.62 3.94 7.530.79 1.62 3.94 7.300.82 1.62 3.94 6.370.70 1.62 3.94 6.840.86 1.74 4.17 7.530.89 1.74 4.28 8.800.73 1.74 4.17 7.640.73 1.74 4.05 7.070.76 1.74 4.17 8.220.78 1.74 4.17 7.30
38 SuperLine
4.25 75 434.30 80 47
11/64 4.37 | |4.40 | |4.50 | |4.60 80 474.70 80 47
3/16 4.76 86 524.80 86 524.90 | |5.00 | |5.10 | |
13/64 5.16 | |5.20 | |5.30 86 525.40 93 575.50 | |
7/32 5.56 | |5.60 | |5.70 | |5.80 | |5.90 | |
15/64 5.95 | |6.00 93 576.10 101 636.20 | |6.30 | |
1/4 6.35 | |6.40 | |6.50 | |6.60 | |6.70 101 63
17/64 6.75 109 696.80 | |6.90 | |7.00 | |7.10 | |
9/32 7.14 | |7.20 | |7.30 | |7.40 | |7.50 109 69
DIN 338Tool material HSS HSCO PM HSS-E
Guhring no. 9651 5523 5519 5522
Type N GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish Tip coated
Ø-range mm
4.25 … 7.50
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £
SL program Drilling Tools
bright TiN
Jobber drills, right-hand cutting
4.400.97 1.74 4.40 8.110.97 1.74 4.40 8.341.00 1.74 4.40 8.800.81 2.21 4.28 7.181.05 1.74 4.53 9.161.06 1.74 4.53 8.800.89 1.85 4.63 8.801.09 1.74 4.63 9.261.10 1.85 4.76 9.490.93 1.85 4.63 7.991.16 1.85 4.76 8.681.18 1.85 4.76 8.801.22 1.85 4.76 9.951.24 1.85 5.09 9.621.27 2.08 5.68 10.421.28 1.97 5.55 8.911.09 2.21 5.55 10.651.35 2.21 5.79 10.541.40 2.21 5.79 11.241.43 2.21 5.79 11.581.47 2.21 5.91 11.241.56 2.21 5.68 10.771.23 2.08 5.55 9.391.56 2.44 6.37 11.241.60 2.44 6.25 11.241.62 2.44 6.14 11.701.36 2.44 6.25 11.581.70 2.44 6.25 11.581.40 2.44 6.71 9.721.77 2.55 6.84 12.271.83 2.55 6.95 12.621.811.51 3.13 7.53 12.391.92 3.13 7.53 13.431.59 3.01 7.53 14.822.02 3.71 8.34 16.441.71 3.71 8.34 15.632.07 3.71 8.34 16.212.14 3.71 8.80 16.212.18 3.71 8.80 16.331.83 3.13 7.99 15.63
39SuperLine
DIN 338
19/64 7.54 117 757.60 | |7.70 | |7.80 | |7.90 | |
5/16 7.94 | |8.00 | |8.10 | |8.20 | |8.30 | |
21/64 8.33 | |8.40 117 758.50 117 758.60 125 818.70 | |
11/32 8.73 | |8.80 | |8.90 | |9.00 | |9.10 | |
23/64 9.13 | |9.20 | |9.30 | |9.40 | |9.50 125 81
3/8 9.52 133 879.60 | |9.70 | |9.80 | |9.90 | |
25/64 9.92 | |10.00 | |10.10 | |10.20 | |10.30 | |
13/32 10.32 | |10.40 | |10.50 | |10.60 133 8710.70 142 94
27/64 10.72 | |10.80 142 94
Tool material HSS HSCO PM HSS-E
Guhring no. 9651 5523 5519 5522
Type N GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish Tip coated
Ø-range mm
7.54 … 10.80
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £
Jobber drills, right-hand cutting
2.372.30 4.05 9.49 17.252.37 4.05 9.26 17.372.43 4.05 9.39 14.582.49 4.05 9.85 17.252.03 4.05 9.39 18.752.06 3.36 9.03 16.212.60 4.05 9.72 21.422.65 4.05 9.62 22.342.73 4.05 9.62 22.342.852.81 4.05 10.08 22.342.34 3.48 9.16 18.982.96 6.14 9.953.02 4.76 13.442.49 4.76 9.95 20.373.08 4.76 10.77 26.283.18 6.78 10.772.63 4.05 10.08 20.963.323.503.393.47 5.09 11.00 31.143.562.95 4.53 10.65 24.772.973.743.77 12.393.85 5.68 12.39 26.744.014.203.29 5.09 12.04 23.854.935.02 6.71 13.89 36.475.23 8.55 14.023.635.443.68 6.71 14.02 35.435.635.774.88 9.145.85
40
SL program Drilling Tools
Tool material HSS HSCO PM HSS-E
Guhring no. 9651 5523 5519 5522
Type N GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish Tip coated
Ø-range mm
10.90 … 14.50
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £
DIN 338Jobber drills, right-hand cutting
SuperLine
10.90 142 9411.00 | |11.10 | |
7/16 11.11 | |11.20 | |11.30 | |11.40 | |11.50 | |
29/64 11.51 | |11.60 | |11.70 | |11.80 142 9411.90 151 101
15/32 11.91 | |12.00 | |12.10 | |12.20 | |
31/64 12.30 151 10112.40 151 10112.50 | |12.60 | |12.70 | |12.80 | |12.90 | |13.00 | |13.10 | |13.20 151 10113.25 160 10813.30 | |13.40 | |
17/32 13.49 | |13.50 | |13.60 | |13.70 | |13.75 | |13.80 | |
35/64 13.89 | |13.90 | |14.00 160 10814.25 169 114
9/16 14.29 | |14.50 169 114
bright TiN
6.004.11 7.64 14.48 35.436.304.22 8.80 15.17 41.806.366.516.684.52 8.80 16.10 37.405.936.896.987.287.284.965.08 9.16 17.02 42.729.569.786.849.905.58 11.24 17.60 46.6610.53
1/2 8.43 12.27 63.7210.9311.156.17 13.20 18.88 46.66
33/64 9.9012.1213.0313.1913.5710.8810.39 14.94 21.88 49.5513.9514.1714.1414.2211.8214.7810.66 15.63 22.81 62.1715.3211.8515.32
41
Tool material HSS HSCO PM HSS-E
Guhring no. 9651 5523 5519 5522
Type N GU 500 DZ GU 500 DZ GT 500 DZ
Surface finish Tip coated
Ø-range mm
14.68 … 16.00
Diameter Lengths
total fluteinch mm length length Unit price in £ Unit price in £ Unit price in £
DIN 338Jobber drills, right-hand cutting
SuperLine
37/64 14.68 178 12014.75 | |15.00 | |
19/32 15.08 | |15.25 | |
39/64 15.48 | |15.50 | |15.75 | |16.00 178 120
16.5916.8613.7414.6218.8519.6117.8820.6016.29
42 SuperLine
Long series twist drills, right-hand cutting DIN 340
1.00 56 331.10 60 371.20 65 411.30 65 411.40 70 451.50 70 451.60 76 501.70 76 501.80 80 531.90 80 532.00 85 562.10 85 562.20 90 592.30 90 592.40 95 622.50 | |2.60 95 622.70 10 662.80 | |2.90 | |3.00 10 663.10 106 693.20 | |3.30 106 693.40 112 733.50 | |3.60 | |3.70 112 733.80 119 783.90 | |4.00 | |4.10 | |4.20 119 784.30 126 824.40 | |4.50 | |4.60 | |4.70 126 824.80 132 874.90 | |5.00 | |5.10 132 87
Tool material HSCO
Guhring no. 5536 5537
Type GU 500 DZ GU 500 DZ
Surface finish
Ø-range mm
1.00 … 5.10
Diameter Lengths
total flutemm length length Unit price in £
SL program Drilling Tools
bright TiN
3.57 6.414.83 7.254.41 8.094.52 7.984.83 7.883.78 6.834.73 8.094.62 8.824.62 8.514.31 9.033.47 6.723.89 7.773.89 7.883.89 7.773.99 7.143.57 6.834.10 7.884.31 8.304.62 7.984.20 8.303.68 7.354.41 8.824.20 8.194.62 8.724.41 9.034.52 8.824.73 9.144.73 8.934.52 8.614.41 9.664.73 9.354.41 9.454.20 9.144.52 10.194.94 9.035.67 9.664.31 9.244.83 10.714.41 10.405.04 10.614.73 10.715.15 11.87
43SuperLine
Long series twist drills, right-hand cutting DIN 340
5.20 132 875.30 132 875.40 139 915.50 | |5.60 | |5.70 | |5.80 | |5.90 | |6.00 139 916.10 148 976.20 | |6.30 | |6.40 | |6.50 | |6.60 | |6.70 148 976.80 156 1026.90 | |7.00 | |7.10 | |7.20 | |7.30 | |7.40 | |7.50 156 1027.60 165 1097.70 | |7.80 | |7.90 | |8.00 | |8.10 | |8.20 | |8.30 | |8.40 | |8.50 165 1098.60 175 1158.70 | |8.80 | |8.90 | |9.00 | |9.10 | |9.20 | |9.30 175 115
Tool material HSCO
Guhring no. 5536 5537
Type GU 500 DZ GU 500 DZ
Surface finish
Ø-range mm
5.20 … 9.30
Diameter Lengths
total flutemm length length Unit price in £
5.25 11.665.99 12.816.62 11.974.20 11.137.04 14.497.14 16.074.10 14.077.56 15.755.78 13.347.98 15.867.98 14.187.56 15.867.88 14.395.88 13.868.82 15.968.82 16.388.72 17.549.87 18.177.98 16.49
10.08 15.9610.61 18.2710.92 19.1111.13 19.8511.66 20.169.24 19.11
10.19 20.3711.13 22.5811.34 21.638.09 18.38
11.87 20.2711.66 22.1611.66 23.4213.13 25.2010.08 21.6312.81 21.4215.65 21.6314.18 22.0517.12 22.379.77 22.79
15.33 22.7916.28 22.7913.44 22.79
44 SuperLine
9.40 175 1159.50 175 1159.60 184 1219.70 | |9.80 | |9.90 | |
10.00 | |10.10 | |10.20 | |10.30 | |10.40 | |10.50 184 12111.00 195 12811.50 195 12812.00 205 13412.50 | |13.00 205 13413.50 214 14014.00 214 140
Tool material HSCO
Guhring no. 5536 5537
Type GU 500 DZ GU 500 DZ
Surface finish
Ø-range mm
9.40 … 14.00
Diameter Lengths
total flutemm length length Unit price in £
Long series twist drills, right-hand cutting DIN 340
SL program Drilling Tools
bright TiN
13.97 22.7912.39 22.7919.22 24.0524.68 25.2017.12 26.9922.58 29.3016.17 31.7117.12 34.5517.96 36.9618.48 39.8019.11 39.8020.16 40.4324.05 48.0924.68 48.6222.58 49.2526.99 53.9729.30 58.5931.71 59.7534.02 62.16
45SuperLine
from 1.0 – 10.5 mmin increments of 0.5 mmsupplementary sizes3.3/4.2/6.8/10.2
24 7,018
from 1.0 – 13.0 mmin increments of 0.5 mm 25 7,014
from 1.0 – 10.0 mmin increments of 0.5 mm 19 9,013
from 1.0 – 13.0 mmin increments of 0.5 mm 25 9,014
Tool material HSCO
Guhring no. 201
Consisting of 5523
Type GU 500 DZ
Surface finish
Compositionof drill set
Drillsper set
Code-no.
Unit price in £
Tool material HSS
Guhring no. 201
Consisting of 9651
Type N
Surface finish Tip coated
Compositionof drill set
Drillsper set
Code-no.
Unit price in £
Sets of jobber drills, right-hand cutting DIN 338
49.90
57.54
36.63
66.79
46
≤500>500-850≤850850-1000≤ 700700-850850-1000850-≤10001000-1200≤750850-≤10001000-1200≥850-≤1000>1000-1200≤850>850-1000≥650-1000
≤330 HB≤850≤850≤850
≤40-48 HRC>48-60 HRC
≤1200≤240 HB <300 HB ≤220 HB <300 HB
800-1000 1200-1400
≤240 HB<300 HB≤350 HB
≤850 >850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600 >600-850≤850>850-1000
K/PRT 100 U
55105610
145 7120 6170 8145 8130 8125 7120 7120 7105 7145 8120 785 5110 7105 580 665 5
60 360 555 545 555 335 235 4195 9160 9
140 9130 840 345 440 3310 9310 9260 9220 9280 8125 7325 8220 7125 7105 690 680 6
≤3×DK/P
RT 100 U
55145614
130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5
45 355 445 445 345 325 225 4210 8155 8
155 7125 735 340 435 3
260 9260 9220 9180 8260 8105 7270 8180 7105 685 680 560 5
≤3×D
SuperLine
SL programGuhringNavigator Drilling Tools Application recommendations
bright
TiAlN nanoA-coated
FIRE-coated
Tools with bold feed column no. are preferred choice.
F
General recommendations: For safety reasons it is very important, that a drill does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifugal forces can break these long tools before reaching the workpiece surface!
Application recommendations for 7xD, 10xD and 12xD drills: Pilot holes are necessary for extra length SL drills ≥7 xD:1.) the pilot hole can be produced with a short, rigid drill. The diameter should be 0.01 - 0.02 mm larger than the diameter of the SL drill, the drilling depth > 1 x D.
2.) alternatively SL drills can produce their own pilot hole. Cutting speed and feed rate should be reduced by 30-40%.
The recommended minimum coolant pressure is 40 bar.
Application recommendations RT 100 VA: Powerful machines, no play in spindlebearings, alignment accurate tool holders. Max. concentricity error of clamped tools 0.02 mm, high coolant pressures. We recommend the application of hydraulic chucks or shrink fit chucks.
Coolant hints:We recommend lubrication by soluble oil or neat oil. Under special conditions coo-ling just by air is possible. But instead ofair cooling we would always preferminimal quantity lubrication, that thetools are especially suited for. WithMQL we recommend the conical shankend and the Guhring MQL components.
For RT 100 VA drills with nom. diameter ≤ 10 mm please choose feed column no. 3, for nom. diameter > 10 mm please choose feed column no. 2.
Material group Material examples, new description (old description in brackets) Figures in bold = material no. to DIN EN
Tensile strength Hardness MPa (N/mm2)
Cool-ant
Common structural steels 1.0035 S185(St33),1.0486 P275N(StE285),1.0345 P235GH(H1),1.0425 P265GH(H2)1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500)
Free-cutting steels 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36)1.0727 46S20 (45S20), 1.0728 (60S20), 1.0757 46SPb20 (45SPb20)
Unalloyed heat-treatable 1.0402 C22, 1.1178 C30E (Ck30)steels 1.0503 C45, 1.1191 C45E (Ck45)
1.0601 C60, 1.1221 C60E (Ck60)Alloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4
1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 (C10), 1.1121 C10E (Ck10)Alloyed case hardened steels 1.7043 38Cr4
1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6
1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9
1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo4High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4)Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18-9 austenitic 1.4301 X5CrNi18-10 (V2A), 1.4541 X6CrNiTi18-10, 1.4571 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.4057 X20CrNi 17 2 (X17CrNi16-2), 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18-2Hardened steels –
Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)
0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)New cast materials CGI EN-GJV250 (GGV25), EN-GJV350 (GGV35)
EN-GJV400 (GGV40), EN-GJV500 (GGV50), SiMo 6New cast materials ADI EN-GJS-800-8 (ADI800), EN-GJS-1000-5 (ADI1000)
EN-GJS-1200-2 (ADI1200), EN-GJS-1400-1 (ADI1400)Spheroidal graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2
3.7154 TiAl6Zr5, 3.7165 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V1Aluminium and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,5Al cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys 3.5200 MgMn2, 3.5812.05 G-MgAl8Zn1, 3.5612.05 G-MgAl6Zn1Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn
2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10
2.0980 CuAl11Ni, 2.1247 CuBe2
Drill Ømm
Feed column no.1 2 3 4 5 6 7 8 9
f (mm/rev.)0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.0191.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.0252.00 0.020 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.1252.50 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.1603.15 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.1604.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2005.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2506.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.3158.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315
10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.40012.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.50016.00 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.63020.00 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.63025.00 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 0.80031.50 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.00040.00 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.000 1.25050.00 0.250 0.310 0.400 0.500 0.630 0.800 1.000 1.250 1.25063.00 0.315 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.60080.00 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000
Cooling: without coolant ducts with coolant ducts
Coolant: Air Neat oil Soluble oil
Cutting direction: right-hand cutting
Tool materialCarbide grade
TypeSurface finish
Cooling
Gu
hr.
no. DIN
6537HAHE
G.S.HAHE
Feed col.no.
Carbide
vcm/min
vcm/min
Feed col.no.
Carbide
47
≤3×DK/P
RT 100 U
55115611
K/PRT 100 U
55145614
K/PRT 100 VA
85108610
K/PRT 100 U
55155615
K/PRT 100 U
55125612
K/PRT 100
5525
KRT 150 GG
5513
KFT 200 G
5518
145 7120 6170 8145 8130 8125 7120 7120 7105 7145 8120 785 5110 7105 580 665 5
60 360 555 545 555 335 235 4210 9160 9
140 9130 840 345 440 3310 9310 9260 9220 9280 8125 7325 8220 7125 7105 690 680 6
130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5
45 355 445 445 345 325 225 4210 8155 8
155 7125 735 340 435 3260 9260 9220 9180 8260 8105 7270 8180 7105 685 680 560 5
80 560 3/2*80 5
30 2
35 2
130 7110 6145 8110 7120 7110 7105 7105 7100 6130 8120 785 5100 690 565 655 5
45 355 445 445 345 325 225 4195 8155 8
145 7125 735 340 435 3
260 9260 9220 8170 8260 8105 7270 8180 7105 685 680 560 5
145 6120 5170 7145 7130 7125 6120 6120 6105 6145 7120 685 4110 6105 480 565 460 460 260 455 445 455 235 135 3210 8180 8
160 8130 740 240 340 2310 8310 8260 8220 8280 7125 6325 7220 6125 6105 590 580 5
110 8110 8120 8120 8110 6110 8100 7110 7110 6110 8110 7110 6100 580 5100 680 550 550 5100 560 3100 550 4
30 2140 8100 8100 6100 690 8
140 8100 8
220 7180 7
120 1120 8
120 6100 6
90 680 640 2
410 8410 8380 8330 8
280 7
110 680 5
100 680 6
80 670 6
180 7160 7150 7120 6180 6
180 6
≤5×D ≤7×D ≤12×D≤10×DK/P
RT 100 VA
85118611
80 560 3/2*80 5
30 2
35 2
≤3×D
SuperLine
vcm/min
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
CarbideCarbide Carbide Carbide Carbide CarbideCarbideCarbide
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
Feed col.no.
Carbide
vcm/min
48
≤500>500-850≤850850-1000≤ 700700-850850-1000850-≤10001000-1200≤750850-≤10001000-1200≥850-≤1000>1000-1200≤850>850-1000≥650-1000
≤330 HB≤850≤850≤850
≤40-48 HRC>48-60 HRC
≤1200≤240 HB <300 HB ≤240 HB<300 HB≤350 HB
≤850 >850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600 >600-850≤850>850-1000
–– ––
SuperLine
Material group Material examples, new description (old description in brackets)Figures in bold = material no. to DIN EN
Tensile strength HardnessMPa (N/mm2)
Cool-ant
Common structural steels 1.0035 S185(St33),1.0486 P275N(StE285),1.0345 P235GH(H1),1.0425 P265GH(H2)1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500)
Free-cutting steels 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36)1.0727 46S20 (45S20), 1.0728 (60S20), 1.0757 46SPb20 (45SPb20)
Unalloyed heat-treatable steels 1.0402 C22, 1.1178 C30E (Ck30)1.0503 C45, 1.1191 C45E (Ck45)1.0601 C60, 1.1221 C60E (Ck60)
Alloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr41.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4
Unalloyed case hardened steels 1.0301 (C10), 1.1121 C10E (Ck10)Alloyed case hardened steels 1.7043 38Cr4
1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6
1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9
1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo4High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4)Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18-9 austenitic 1.4301 X5CrNi18-10 (V2A), 1.4541 X6CrNiTi18-10, 1.4571 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.4057 X20CrNi 17 2 (X17CrNi16-2), 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18-2Hardened steels –
Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)
0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2
3.7154 TiAl6Zr5, 3.7165 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V1Aluminium and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,5Al cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys 3.5200 MgMn2, 3.5812.05 G-MgAl8Zn1, 3.5612.05 G-MgAl6Zn1Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn
2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10
2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, MakralonKevlar KevlarGlass, carbon concent. plastics GFK/CFK
Drill Ømm
Feed column no.1 2 3 4 5 6 7 8 9
f (mm/rev.)0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.0191.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.0252.00 0.020 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.1252.50 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.1603.15 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.1604.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2005.00 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.2506.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.3158.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315
10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.40012.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.50016.00 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.63020.00 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.63025.00 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 0.80031.50 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.00040.00 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1.000 1.25050.00 0.250 0.310 0.400 0.500 0.630 0.800 1.000 1.250 1.25063.00 0.315 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.60080.00 0.400 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000
Coolant: Air Neat oil Soluble oil
* Cutting lip corrected to appr. 10°
General recommendations: For safety reasons it is very important, that a drill does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifugal forces can break these long tools before reaching the workpiece surface!
SL programGuhringNavigator Drills Application recommendations
bright
TiN-coated
UF Ultra fine grain
Tools with bold feed column no. are preferred choice.
* Use tools with large back taper
S
49
HSS-E-PM–
GT 500
5521
HSS-E-PM–
GT 500
5522
K10/K20N
5516
K10/K20N
5517
40 632 545 640 542 640 528 425 420 340 422 418 320 415 325 415 315 312 215 410 312 3
50 640 645 632 68 3
50 5
60 550 545 440 432 425 4
40 632 545 640 542 640 528 425 420 340 422 418 320 415 325 415 315 312 215 410 312 3
50 640 645 632 68 3
50 5
60 550 545 440 432 425 4
HSCO– –GU 500
5524 5520
HSCO– –GU 500
5523 5519
35 45 6 630 35 5 540 50 6 630 40 6 632 42 6 628 35 6 620 22 5 515 18 4 413 15 3 330 40 6 616 20 4 412 15 3 315 18 4 410 12 3 315 18 4 410 13 3 310 13 3 3
14 18 4 410 12 4 412 15 4 4
36 45 6 630 36 6 630 40 6 622 28 6 6
50 70 7 750 70 7 765 85 7 760 70 6 660 70 6 625 32 5 545 63 5 530 40 5 536 50 4 430 35 4 430 32 4 425 28 4 420 25 4 415 15 4 4
35 45 6 630 35 5 540 50 6 630 40 6 632 42 6 628 35 6 620 22 5 515 18 4 413 15 3 330 40 6 616 20 4 412 15 3 315 18 4 410 12 3 315 18 4 410 13 3 310 13 3 3
14 18 4 410 12 4 412 15 4 4
36 45 6 630 36 6 630 40 6 622 28 6 6
50 70 7 750 70 7 765 85 7 760 70 6 660 70 6 625 32 5 545 63 5 530 40 5 536 50 4 430 35 4 430 32 4 425 28 4 420 25 4 415 15 4 4
25 425 325 320 3
15 290 480 470 460 4
20 315 2
200 7200 7150 6120 6180 580 5*180 5*180 5*120 5120 570 450 350 440 3
80 3
25 425 325 320 3
15 290 480 470 460 4
20 315 2
200 7200 7150 6120 6180 580 5*180 5*180 5*120 5120 570 450 340 450 3
80 3
HSCO– –GU 500
5536 5537
29 32 6 622 25 5 532 35 6 625 28 6 625 28 6 622 25 6 613 15 5 512 13 4 411 12 3 325 28 6 612 14 4 411 12 3 312 13 4 47 8 3 312 13 4 49 10 3 39 10 3 3
12 13 4 47 8 4 411 12 4 4
29 32 6 623 26 6 625 28 6 618 20 6 6
45 50 7 745 50 7 754 60 7 745 50 6 645 50 6 621 24 5 545 50 5 525 28 5 531 35 4 422 25 4 422 24 4 418 20 4 416 18 4 411 12 4 4
Feed col.no.
vcm/min
vcm/min
≤10×D
SuperLine
≤3×D drilling depth ≤5×D drilling depthTool materialCarbide grade
TypeSurface finish
Gu
hri
ng
no.
stra
igh
t
DIN 1897DIN 338DIN 340DIN 6539G.S.
Feed col.no.
Feed col.no.
Feed col.no.
Feed col.no.
Feed columnno.
Feed columnno.
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
vcm/min
Carbide Carbide
50
RF 100 U • • • • • •RF 100 F • • • •RF 100 A • •RF 100 SF • • • • • • • • • • •• •
400
300
200
100
0
0 0.5 1.0 1.5 2.0
400
300
200
100
0
0 0.5 1.0 1.5 2.0
SuperLine
The cutting force comparison between a conventional milling cutter type N and a RF100 clearly shows the quieter, more rigid operation of the RF100.
Ff in
[N
]Ff
in [
N]
Milling length section [mm]
Type N
RF 100
Material(ISO-code)
Ste
el
Cas
t ir
on
Sta
inle
ss
stee
l
Alu
min
ium
Ti-
spec
ial
allo
ys
Har
den
ed
stee
l
Hardnesstensile strength
up t
o 85
0 N
/mm
2
abov
e 85
0 N
/mm
2
up t
o 18
0 H
B 3
0
abov
e 18
0 H
B 3
0
up t
o 75
0 N
/mm
2
abov
e 75
0 N
/mm
2
up t
o 3%
Si
abov
e 3
% S
i
Ti-b
ased
Ni-b
ased
up t
o 52
HR
C
abov
e 52
HR
C
= optimal suitability = limited suitability
Guhring solid carbide Ratio end mills type RF 100
We have developed the Ratio end mill with uneven helix angle pri-marily to prevent chattering and the so-called corkscrew effect (as found when withdrawing tools having a large helix angle).
However, the uneven helix angle does not only combat these two unwanted effects but offers the following additional advantages:
Summary of advantages• suitable for roughing and finishing• up to 60% higher feed rates• up to 4-times longer tool life• vibration-free operation• improved workpiece surface quality
with micro-corner protection for longer tool life
12 3
4 1
2 3
4 1
23 4
35°
38°
35°
38°
1
2
3
4
Guhring’s Ratio end mills offer a very simple, but highly efficient solution in order to provide optimal rigidity during the machining process. The cutting edges possess different helix angles. Subsequently, Ratio end mills have an uneven cutting edge spacing that effectively suppresses the rege-nerative effect.
In contrast to the heavy chattering characteristics displayed by a tool with an even cutting edge spacing, the milling process with a Ratio end mill from Guhring is chatter-free resulting in an improved workpiece surface quality as well as an increased profile accuracy and an improved tool life.
Cutting edge runout
End mill centre
End mill face
Cutting edges
Flute form relative to the tool axis
SL program Milling cutters
51SuperLine
6.00 6 54 10 8.00 8 58 1210.00 10 66 1412.00 12 73 1614.00 14 75 1816.00 16 82 2218.00 18 84 2420.00 20 92 26
Ratio unequal helix end mills RF 100, 4-fluted DIN 6527 short
FIRE *with highly unequal helix angles
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5534
Form HB
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle* 35° and 38°
Ø-range mm
6.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
13.7418.3825.9134.1142.4355.3981.5685.39
13.3513.3520.2120.2124.0224.0225.47
52 SuperLine
4.00 6 57 115.00 6 57 136.00 6 57 138.00 8 63 19
10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 3825.00 25 121 45
Ratio unequal helix end mills RF 100, 4-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5735 5535
Form HA HB
Type N N
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle* 35° and 38°
Ø-range mm
4.00 … 25.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
SL program Milling cutters
15.86 17.0715.86 17.0716.26 16.9220.88 21.5531.08 31.7340.06 40.8653.14 53.8069.79 70.5998.74 99.55107.21 107.87224.46 231.06
13.3513.3520.1620.1624.0224.0225.4728.01
53
35°38°
SuperLine
• up to 60% higher in feed rates
• longer tool life
• vibration-free machining
• suitable for roughing and finishing
• increased surface quality
Guhring no. 5534 code no 1,0FIRE-coated, short length, cutting over centre, diameters 6, 8, 10, 12 and 16 mm
£ 104.43/set
Guhring no. 5535 code no 1,0FIRE-coated, long length, cutting over centre, diameters 6, 8, 10, 12 and 16 mm
£ 117.65/set
The Super-Line RF 100 Package Deal
54 SuperLine
10.00 10.00 100.00 40.0012.00 12.00 150.00 45.0016.00 16.00 150.00 65.0020.00 20.00 150.00 65.0025.00 25.00 150.00 75.00
SL program Milling cutters
Ratio unequal helix end mills RF 100, 4-fluted Guhring std.
Regrinding and
recoating
Net priceper piece
l2
l1
d1
d2
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5582
Form HA
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle* 35° and 38°
Ø-range mm
10.00 … 25.00
l2
l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
FIRE *with highly unequal helix angles
65.4494.38177.92235.82322.15
13.3520.1624.1425.4728.01
55SuperLine
0.50* 3 38 1.50.60* | | 1.50.80* | | 21.00* | | |1.20* | | |1.50* | | |1.80* 3 38 22.00 6 35 42.50 | 36 53.00 | 36 53.50 | 37 64.00 | 38 74.50 | 38 85.00 | 39 |5.50 | | |5.75 | | |6.00 6 39 86.75 8 42 107.00 | | |7.75 | 42 108.00 8 43 118.70 10 48 |9.00 | | |9.70 | 48 11
10.00 10 50 1312.00 12 55 1514.00 14 58 1516.00 16 62 1818.00 18 70 2020.00 20 75 22
Mini slot drills, 3-fluted Guhring std. short
FIRE *≤ Ø 1.8 mm: straight shank according to DIN 6535 HA
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5573
Form –
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
0.50 … 20.00
l2l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
8.988.987.286.089.406.089.407.948.207.948.207.949.408.989.4010.458.9813.7412.5712.8312.5719.2918.3819.2917.8521.4229.2237.8045.2160.42
56 SuperLine
Mini slot drills, 3-fluted Guhring std. longTool material Carbide-UF
Carbide grade K/P
Guhring no. 5574
Form –
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 45°
Ø-range mm
1.00 … 10.00
l2
l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
SL program Milling cutters
FIRE *≤ Ø 1.8 mm: straight shank according to DIN 6535 HA
1.00* 3 38 21.20* | | 21.50* | | 31.80* 3 38 32.00 6 45 42.50 | | 53.00 | | 63.50 | | 64.00 | | 74.50 | | 85.00 | | |5.50 | | 85.75 | | 106.00 6 45 |6.75 8 55 107.00 | | 127.75 | | 128.00 8 | 138.70 10 | 149.00 | | 149.70 | | 16
10.00 10 55 16
7.288.987.288.9810.0510.4510.0510.0510.0510.7110.0510.7110.7110.0514.0113.7413.7413.7418.6417.4518.9118.38
57SuperLine
Ball nose slot drills, 2-fluted DIN 6527 long
FIRE
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5585 5533
Form HA HB
Type N N
Tolerance on cutting diameter H10 h10
Surface finish
Helix angle 30° 30°
Ø-range mm
0.50 … 20.00
l2 l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
0.50 3 38 11.00 3 38 21.50 3 38 32.00 6 57 63.00 6 57 74.00 6 57 85.00 6 57 106.00 6 57 108.00 8 63 16
10.00 10 72 1912.00 12 83 2220.00 20 104 32
24.4621.2920.1020.5020.5020.50 21.1520.50 21.1520.50 21.1526.17 26.8433.98 34.6347.46 48.11
120.02
17.4418.8325.4728.01
58 SuperLine
2.00 6 57 63.00 | | 74.00 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 169.00 10 72 16
10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32
Slot drills, 2-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5730 5530
Form HA HB
Type N N
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 30°
Ø-range mm
2.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
SL program Milling cutters
FIRE
12.31 13.0912.31 13.0911.50 12.3111.50 12.3110.71 11.3718.64 19.2915.07 15.8626.84 27.4922.36 23.0131.99 32.7847.33 47.9957.38 58.0483.29 83.9587.12 88.04
10.1612.1312.1317.4417.4418.7120.1621.37
59SuperLine
3.00 3 75 204.00 4 | 255.00 5 | 306.00 6 75 308.00 8 100 40
10.00 10 100 4012.00 12 150 4514.00 14 | 4516.00 16 | 6518.00 18 | |20.00 20 150 65
3.00 6 50 44.00 | 54 55.00 | 54 66.00 | 54 78.00 8 58 9
10.00 10 66 1112.00 12 73 1214.00 14 75 1416.00 16 82 1618.00 18 84 1820.00 20 92 20
Slot drills, 2-fluted Guhring std.
Regrinding and
recoating
Net priceper piece
Tool material Car.-UF
Carbide grade K/P
Guhring no. 5549
Form –
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
3.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nom.Ø
shankØ
totallength
cut. edgelength
d1 d2 l1 l2 Unit pr./£
Slot drills, 2-fluted DIN 6527 short
Regrinding
Net priceper piece
Tool material Carbide-UF
Carbide grade K
Guhring no. 5742 5542
Form HA HB
Type W* W*
Tolerance on cutting diameter e8 e8
Surface finish
Helix angle 45°
Ø-range mm
3.00 … 20.00
l2l1
d1
d2
Diametermm
Lengthsmm
nom.Ø
shankØ
totallength
cut. edgelength
d1 d2 l1 l2 Unit price/£
bright FIRE *especially for aluminium and non-ferrous metals
16.1217.4518.3818.3835.0343.0966.3680.25106.42124.00141.45
9.79 10.319.79 10.319.79 10.319.79 10.3111.63 12.5716.12 16.7924.20 24.8532.93 33.5837.15 37.9450.37 51.0265.71 66.36
8.039.4913.3513.3514.7016.0717.48
10.6912.1317.4417.4418.7120.1621.37
60 SuperLine
Slot drills, 2-fluted DIN 6527 long
Regrinding
Net priceper piece
Tool material Carbide-UF
Carbide grade K
Guhring no. 5743 5543
Form HA HB
Type W* W*
Tolerance on cutting diameter e8 e8
Surface finish
Helix angle 45°
Ø-range mm
3.00 … 20.00
l2l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
SL program Milling cutters
bright *especially for aluminium and non-ferrous metals
3.00 6 57 74.00 | | 85.00 | | 106.00 6 57 108.00 8 63 16
10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32
12.57 13.2212.57 13.2212.57 13.2212.57 13.2213.89 14.5524.85 25.5335.84 36.4843.76 44.5659.09 59.9067.82 68.6292.53 93.33
8.039.4913.3513.3514.7016.0717.48
61SuperLine
Slot drills, 3-fluted DIN 6527 short
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5505 5502
Form HA HB
Type NH NH
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 45°
Ø-range mm
3.00 … 20.00
l2 l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
FIRE
3.00 6 50 44.00 | 54 55.00 | | 66.00 6 54 77.00 8 58 88.00 8 58 99.00 10 66 10
10.00 10 66 1112.00 12 73 1214.00 14 75 1416.00 16 82 1618.00 18 84 1820.00 20 92 20
12.31 13.0911.50 12.3111.50 12.3111.50 12.3118.12 18.7716.66 17.3324.99 25.6523.27 24.2029.22 30.0140.32 41.1355.92 49.3163.45 64.1184.07 85.00
13.3514.7814.7820.1620.1621.3721.3722.82
62 SuperLine
2.00 6 57 62.50 | | 73.00 | | |3.50 | | 74.00 | | 84.50 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 168.50 10 72 |9.00 | | 16
10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32
Slot drills, 3-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5507 5531
Form HA HB
Type N N
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 30°
Ø-range mm
2.00 … 20.00
l2 l1
d1
d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
SL program Milling cutters
FIRE
12.31 13.0913.09 13.7412.31 13.0913.09 13.7411.50 12.3113.35 14.0111.50 12.3110.71 11.3718.64 19.2915.07 15.8627.90 28.5626.84 27.4922.36 23.0131.99 32.7847.33 47.9957.38 58.0483.29 83.9587.12 88.04
13.3514.7814.7814.7820.1620.1621.3721.3722.82
63SuperLine
3.00 6 57 73.50 | | 74.00 | | 84.50 | | 85.00 | | 106.00 6 57 107.00 8 63 138.00 8 63 169.00 10 72 16
10.00 10 72 1912.00 12 83 2214.00 14 83 2216.00 16 92 2618.00 18 92 2620.00 20 104 32
8.00 8 63 1610.00 10 72 1912.00 12 83 2216.00 16 92 2620.00 20 104 32
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5506 5546
Form HA HB
Type NH NH
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 45°
Ø-range mm
3.00 … 20.00
l2 l1
d1
d2
Diametermm
Lengthsmm
nom.Ø
shankØ
totallength
cut. edgelength
d1 d2 l1 l2 Unit price in £
Regrinding
Net priceper piece
Tool material Carb.-UF
Carbide grade K
Guhring no. 5544
Form HB
Type WR*
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
8.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nom.Ø
shankØ
totallength
cut. edgelength
d1 d2 l1 l2 Unit pr./£
Slot drills, 3-fluted DIN 6527 long
bright FIRE
13.89 14.5515.34 16.0013.89 14.5515.34 16.0013.89 14.5513.89 14.5518.38 19.0317.45 18.3827.10 27.7625.53 26.1738.74 39.3948.92 49.5866.36 67.0280.90 81.56105.75 106.42
29.2235.8444.5667.02
124.00
10.6912.1316.6518.6920.12
13.3514.7814.7820.1620.1621.3721.3722.82
64 SuperLine
3.00 6 57 84.00 6 57 115.00 6 57 136.00 6 57 138.00 8 63 19
10.00 10 72 2212.00 12 83 2620.00 20 104 38
SL program Milling cutters
FIRE
Ball nose end mills, 4-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5584
Form HB
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
3.00 … 20.00
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
l2
l1
d1
d2
24.5824.5825.3924.5830.8140.0654.87137.87
17.4418.8325.4728.01
65SuperLine
2.00 6 57 73.00 | | 84.00 | | 115.00 | | 136.00 6 57 137.00 8 63 168.00 8 63 199.00 10 72 19
10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 38
End mills, 4-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5532
Form HB
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
2.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
FIRE
14.4215.4815.0715.8615.8618.6418.6424.2028.8239.0053.9372.0591.88111.96
13.3513.3514.7814.7820.1620.1621.3721.3722.82
66 SuperLine
3.00 3 75 204.00 4 | 255.00 5 | 306.00 6 75 308.00 8 100 40
10.00 10 100 4012.00 12 150 4514.00 14 | 4516.00 16 | 6518.00 18 | |20.00 20 150 65
SL program Milling cutters
FIRE
End mills, 4-fluted Guhring std.
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5556
Form HA
Type N
Tolerance on cutting diameter h10
Surface finish
Helix angle 30°
Ø-range mm
3.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
18.3820.3621.9427.7629.2240.8664.1177.3497.70
110.12127.56
13.3514.7820.1620.1621.3721.3722.82
67SuperLine
3.00 6 57 11 64.00 6 57 11 |5.00 6 57 13 |6.00 6 57 13 |8.00 8 63 19 |
10.00 10 72 22 |12.00 12 83 26 |14.00 14 83 26 |16.00 16 92 32 618.00 18 92 32 820.00 20 104 38 825.00 25 121 45 10
End mills, multi-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5745 5545
Form HA HB
Type NH NH
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 45°
Ø-range mm
6.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
no. ofcutting edges
d1 d2 l1 l2 Unit price in £
FIRE
20.5019.5518.5117.45 18.3821.29 21.9432.93 33.5843.76 44.5659.90 59.9079.58 80.2592.53 93.33110.12 110.78195.11
13.3514.7820.1620.1621.3721.3722.8228.01
68 SuperLine
6.00 6 75 30 68.00 8 100 40 |
10.00 10 100 40 |12.00 12 150 45 |16.00 16 | 65 620.00 20 150 65 8
SL program Milling cutters
FIRE
End mills, multi-fluted Guhring std.
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5729 5529
Form HA HB
Type NH NH
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 45°
Ø-range mm
6.00 … 20.00
l2
l1
d1 d2
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
no. ofcutting edges
d1 d2 l1 l2 Unit price in £
24.99 25.6528.69 29.6051.02 51.8270.59 71.38127.56 128.23191.68 192.34
14.7820.1621.3722.82
69SuperLine
6.00 6 57 138.00 8 63 19
10.00 10 72 2212.00 12 83 2614.00 14 83 2616.00 16 92 3218.00 18 92 3220.00 20 104 38
End mills, 4-fluted DIN 6527 long
Regrinding and
recoating
Net priceper piece
Tool material Carbide-UF
Carbide grade K/P
Guhring no. 5504 5583
Form HB HB
Type NRf HR
Tolerance on cutting diameter h10 h10
Surface finish
Helix angle 30° 20°
Ø-range mm
6.00 … 20.00
l2
l1
d1 d2
HR
Diametermm
Lengthsmm
nominalØ
shankØ
totallength
cutting edgelength
d1 d2 l1 l2 Unit price in £
FIRE
41.91 52.8848.11 57.1252.22 62.1362.13 73.1186.8598.61 116.86130.75147.40 174.75
14.7820.1620.1621.3721.3722.82
70
42414142414142424241414241404140424042404140
40414041404040404343424344434342424142404040
85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94 63 - 77 90 - 110 76 - 94 54 - 66 85 - 105 76 - 94 76 - 94 63 - 77 45 - 55 45 - 55 45 - 55 40 - 50 36 - 44 45 - 55
27 - 33 108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44
405 - 495 495 - 605 198 - 242 162 - 198 225 - 275 108 - 132 90 - 110 81 - 99 90 - 110 72 - 88 72 - 88 63 - 77
108 - 132 99 - 121
4241414241414242424141424140414042
424041
4041404140404040
85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94 63 - 77 90 - 110 76 - 94 54 - 66 85 - 105 76 - 94 76 - 94 63 - 77 45 - 55
45 - 55 40 - 50 36 - 44
27 - 33 108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44
≤500>500-850≤850850-1000≤700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000>650-1000
≤330 HB≤750750-800850-1200
≤40-54 HRC>54-60 HRC
≤1200≤240 HB<300 HB≤240 HB<300 HB≤350 HB
≤850850-1200≤450≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-1000––
N N N NH W N NH NH N N NDIN 6527 HA 5730 5507 5549 5505 5506 5742 5743 5585**DIN 6527 HB 5530 5531 5502 5546 5542 5543 5533** 5584** HA 5745 5729* HB 5573 5574 5545 5529*
SuperLine
Milling cutters
* For large cutting depths on unstable machines fz and vc must be reduced or a 4-flute tool RF 100 (Guhring no. 5582) must be applied.** To improve the surface quality, the milling angle should be 10°-15°.
Slot milling
ae = 1 x D ae = 1 x D
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.
1 x D = 75%1,5 x D = 50%
1 x D = 75%1,5 x D = 50%
3 x D = 50% 1 x D = 75%1,5 x D = 50%
1 x D = 75%1,5 x D = 50%
1,5 x D = 75% 1,5 x D = 75%
Material group Material examples Tens. strength Hard-MPa (N/mm2) ness
Common structural steels 1.0035 S185, 1.0486 P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH
Free-cutting steels 1.0718 11SMnPb30, 1.0736 11SMn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb20
Unalloyed heat-treatable 1.0402 C22, 1.1178 C30Esteels 1.0503 C45, 1.1191 C45E
1.0601 C60, 1.1221 C60EAlloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4
1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 C10, 1.1121 C10EAlloyed case hardened steels 1.7043 38Cr4
1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6
1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9
1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17 austenitic 1.4301 X5CrNi18-10, 1.4541 X6CrNiTi18-10 martensitic 1.4057 X20CrNi17-2, 1.4122 X39CrMo17-1 Hardened steels –
Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)
0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2
3.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5Al and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3SiAl cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn
2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10
2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, Makralon
ap with fz-correction
Cutter-Ømm
Feed column no.
37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
fz (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.0203.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.0305.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.0386.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.041 0.0478.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.042 0.042 0.047 0.053 0.052 0.058 0.064
10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.08012.00 0.010 0.018 0.022 0.026 0.030 0.036 0.046 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.10016.00 0.020 0.023 0.027 0.032 0.038 0.045 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.12020.00 0.023 0.028 0.033 0.038 0.045 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.14025.00 0.030 0.035 0.040 0.045 0.055 0.065 0.075 0.100 0.120 0.130 0.140 0.150 0.165 0.170 0.180 0.190
Tools with bold feed column no. (FC no.) are preferred choice.
ae = Width of cut
ap = Depth of cut
Tool material Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp
Gu
hri
ng
no.
Guhring std.Guhring std.
ap = 0.5 x D ap = 0.5 x D ap = 2 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 1.5 x D ap = 3 x D ap = 0.05 x D ap = 0.05 x D
71
N N N NH W N NH NH N N NDIN 6527 HA 5730 5507 5549 5505 5506 5742 5743 5585**DIN 6527 HB 5530 5531 5502 5546 5542 5543 5533** 5584** HA 5745 5729* HB 5573 5574 5545 5529*
3938383938383939393838393837383739
38373837
3737
72 - 88 67 - 83 72 - 88 54 - 66 72 - 88 63 - 77 54 - 66 63 - 77 54 - 66 67 - 83 63 - 77 45 - 55 72 - 88 63 - 77 63 - 77 54 - 66 40 - 50
94 - 116 85 - 105 81 - 99 67 - 83
58 - 72 31 - 39
4646454647464645454445434343
297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88
94 - 116 89 - 109 94 - 116 69 - 85 94 - 116 84 - 104 69 - 85 84 - 104 69 - 85 99 - 121 84 - 104 59 - 73 94 - 116 84 - 104 84 - 104 69 - 85 49 - 61 49 - 61 49 - 61 45 - 55 39 - 49 49 - 61
29 - 37 118 - 146 108 - 134 99 - 121 89 - 109 59 - 73 49 - 61 39 - 49
217 - 267 178 - 218
118 - 146 99 - 121
99 - 121 79 - 97
43424243424243434342424342414241434143414241
4142414241414141
4344
4444
4342
4241414241414242
4141
41
414042
424041
414041404040404646454647464645454445434343
85 - 105 81 - 99 85 - 105 63 - 77 85 - 105 76 - 94 63 - 77 76 - 94
90 - 110 76 - 94
85 - 105
76 - 94 63 - 77 45 - 55
45 - 55 40 - 50 36 - 44
108 - 132 99 - 121 90 - 110 81 - 99 54 - 66 45 - 55 36 - 44
297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88
94 - 116 89 - 109 94 - 116 69 - 85 94 - 116 84 - 104 69 - 85 84 - 104
99 - 121 84 - 104
94 - 116
84 - 104 69 - 85 49 - 61
49 - 61 45 - 55 39 - 49
29 - 37 118 - 146 108 - 134 99 - 121 89 - 109 59 - 73 49 - 61 39 - 49
297 - 363 360 - 440 217 - 267 178 - 218 171 - 209 118 - 146 99 - 121 67 - 83 99 - 121 79 - 97 63 - 7754 - 6681 - 9972 - 88
4342424342424343
4242
42
424143
434142
41424142414141414646434447444445434245434343
48474746474746464547474647454745464546454643
4547464746
45445050484950494848484747464646
171 - 209 157 - 193 171 - 209 126 - 154 171 - 209 153 - 187 126 - 154 153 - 187 126 - 154 189 - 231 153 - 187 117 - 143 171 - 209 153 - 187 153 - 187 126 - 154 94 - 116 94 - 116 94 - 116 81 - 99 76 - 94 49 - 61
54 - 66 220 - 270 202 - 248 180 - 220 157 - 193
94 - 116 76 - 94
810 - 990 720 - 880 405 - 495 324 - 396 450 - 550 216 - 264 198 - 242 162 - 198 198 - 242 153 - 187 153 - 187 126 - 154 216 - 264 198 - 242
136 - 168 45 126 - 154 44 136 - 168 44 100 - 124 43 136 - 168 44 122 - 150 44 100 - 124 43 122 - 150 43 100 - 124 42 151 - 185 44 122 - 150 44 93 - 115 43
136 - 168 44 122 - 150 42 122 - 150 44 100 - 124 42 75 - 93 43 75 - 93 42 75 - 93 43 64 - 80 42 61 - 75 43 39 - 49 41
32 - 40 42 132 - 162 44 121 - 149 43 108 - 132 44 94 - 116 41
56 - 70 42 45 - 57 41
486 - 594 41 432 - 528 41 243 - 297 45 194 - 238 46
118 - 146 45
118 - 146 45 91 - 113 44
75 - 93 43
48474746474746464547474647454745464546454644
454746474644
153 - 187 144 - 176 153 - 187 153 - 187 135 - 165 135 - 165 117 - 143 126 - 154 153 - 187 198 - 242 171 - 209 108 - 132 144 - 176 135 - 165 135 - 165 117 - 143 85 - 105 85 - 105 85 - 105 76 - 94 67 - 83 49 - 61
49 - 61 198 - 242 189 - 231 171 - 209 144 - 176 99 - 121
48474746474746464547474647454745464546454644
454746474644
505048495049484848474746
153 - 187 144 - 176 153 - 187 153 - 187 135 - 165 135 - 165 117 - 143 126 - 154 153 - 187 198 - 242 171 - 209 108 - 132 144 - 176 135 - 165 135 - 165 117 - 143 85 - 105 85 - 105 85 - 105 76 - 94 67 - 83 49 - 61
49 - 61 198 - 242 189 - 231 171 - 209 144 - 176 99 - 121
720 - 880 855 - 1045 342 - 418 288 - 352 405 - 495 180 - 220 171 - 209 162 - 198 180 - 220 171 - 209 198 - 242 189 - 231
SuperLine
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.
1 x D = 75%1,5 x D = 50%
1 x D = 75%1,5 x D = 50%
3 x D = 50% 1 x D = 75%1,5 x D = 50%
1 x D = 75%1,5 x D = 50%
1,5 x D = 75% 1,5 x D = 75%
Fine finishing Trace milling
ae = 1 x D ae = 1 x D ae = 1 x D ae = 1 x D ae = 1 x D ae = 0.05 x D ae = 0.05 x D ae = 0.05 x D ae = 0.05 x D
Tool material Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp
Gu
hri
ng
no.
Guhring std.Guhring std.
ap = 0.5 x D ap = 0.5 x D ap = 2 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 0.5 x D ap = 1.5 x D ap = 3 x D ap = 0.05 x D ap = 0.05 x D
72
≤500>500-850≤850850-1000≤700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000>650-1000
≤330 HB≤750750-800850-1200
≤40-54 HRC>54-60 HRC
≤1200≤240 HB<300 HB≤240 HB<300 HB≤350 HB
≤850850-1200≤450≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-1000––
51505049505049494850504950485048494849484946
4850495049474342
170 - 208 157 - 193 170 - 208 126 - 154 170 - 208 151 - 185 126 - 154 151 - 185 126 - 154 189 - 231 151 - 185 113 - 139 170 - 208 151 - 185 151 - 185 126 - 154 94 - 116 94 - 116 80 - 10070 - 9065 - 70 44 - 54
56 - 70 220 - 270 201 - 247 182 - 224 157 - 193 107 - 131
54 - 86 44 - 72
4746464546464545444646454644464445
454445
4645464543444347474546474645454544
110 - 136 102 - 126 110 - 136 81 - 101 110 - 136 98 - 120 81 - 101 98 - 120 81 - 101
123 - 151 98 - 120 73 - 91
110 - 136 98 - 120 98 - 120 81 - 101 61 - 75
60 - 8055 - 7550 - 65
143 - 175 131 - 161 118 - 146 102 - 126 69 - 85 61 - 75 49 - 61
300 - 380370 - 440150 - 185115 - 145175 - 21580 - 10075 - 9560 - 7575 - 9555 - 70
N N NH W NRf HR N N N N WDIN 6527 HA 5735* 5582 5505 5506 5742 5743 5735 5582 5556DIN 6527 HB 5535* 5534* 5502 5546 5542 5543 5504** 5583** 5535 5534 5532 5543 HA HB
SuperLine
Material group Material examples Tens. strength Hard-MPa (N/mm2) ness
Common structural steels 1.0035 S185, 1.0486 P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH
Free-cutting steels 1.0718 11SMnPb30, 1.0736 11SMn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb20
Unalloyed heat-treatable 1.0402 C22, 1.1178 C30Esteels 1.0503 C45, 1.1191 C45E
1.0601 C60, 1.1221 C60EAlloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4
1.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4Unalloyed case hard. steels 1.0301 C10, 1.1121 C10EAlloyed case hardened steels 1.7043 38Cr4
1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6
1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9
1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17 austenitic 1.4301 X5CrNi18-10, 1.4541 X6CrNiTi18-10 martensitic 1.4057 X20CrNi17-2, 1.4122 X39CrMo17-1 Hardened steels –
Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)
0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2
3.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5Al and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3SiAl cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn
2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10
2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, Makralon
ap with fz-correction
Cutter-Ømm
Feed column no.
37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
fz (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.0203.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.0305.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.0386.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.041 0.0478.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.042 0.042 0.047 0.053 0.052 0.058 0.064
10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.08012.00 0.010 0.018 0.022 0.026 0.030 0.036 0.046 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.10016.00 0.020 0.023 0.027 0.032 0.038 0.045 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.12020.00 0.023 0.028 0.033 0.038 0.045 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.14025.00 0.030 0.035 0.040 0.045 0.055 0.065 0.075 0.100 0.120 0.130 0.140 0.150 0.165 0.170 0.180 0.190
Tools with bold feed column no. (FC no.) are preferred choice.
ae = Width of cut
ap = Depth of cut
Roughing
ae = 0.5-1.0 x D ae = 0.25 x D
* With this application, optimal chip evacuation must be ensured. Slot milling only recommended > Ø 5 mm.** In the event of excessive edge wear through vibration, the feed rate should be reduced by 30%.
Milling cuttersSchneidstoff Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF
Typ
Gu
hri
ng
no.
Guhring std.Guhring std.
ap = 1 x D ap = 2 x D ap = 1 x D ap = 1 x D ap =1 x D ap = 1 x D ap = 1 x D ap = 2 x D ap = 1 x D ap = 2 x D ap = 1 x D
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.
ap 1.5 x D = 50%ae 0.25 x D = 150%
ap 0.5 x D = 75%ap 2 x D = 50%
ap 0.5 x D = 120%ap 2 x D = 50%
ap 0.5 x D = 120%ap 2 x D = 50%
ap 1.5 x D = 50%ae 0.25xD = 140%
ap 0.5 x D = 120% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50%
73
N N NH W NRf HR N N N N WDIN 6527 HA 5735* 5582 5505 5506 5742 5743 5735 5582 5556DIN 6527 HB 5535* 5534* 5502 5546 5542 5543 5504** 5583** 5535 5534 5532 5543 HA HB
4646444546454444444343424242
297 - 363 360 - 440 144 - 176 117 - 143 171 - 209 81 - 99 72 - 88 67 - 83 72 - 88 63 - 77 63 - 77 54 - 66 81 - 99 72 - 88
170 - 208157 - 193170 - 208126 - 154170 - 208151 - 185126 - 154151 - 185126 - 154189 - 231151 - 185113 - 139170 - 208151 - 185151 - 185126 - 15494 - 116 67 - 83 67 - 83 58 - 72 54 - 66 31 - 39
40 - 50 157 - 193 144 - 176 130 - 160 112 - 138 76 - 94 67 - 83 54 - 66
117 - 143
63 - 77 63 - 77 54 - 66 81 - 99 72 - 88
49484847484847474648484748464846474647464744
4648474847454645
45
4343424242
39
4140413941394726
403838
4241424139
42
4241
72 - 88
86 - 106 64 - 80 97 - 119 86 - 106 86 - 106 72 - 88 54 - 66 54 - 66
43 - 53 25 - 31 18 - 22
126 - 154 115 - 141 104 - 128 90 - 110 61 - 75
117 - 143
117 - 14387 - 107
43424241424241414042424142404240
41404138
4244434443
4140
444444434342
97 - 119 90 - 110 97 - 119 72 - 88 97 - 119 86 - 106 72 - 88 86 - 106 72 - 88
108 - 132 86 - 106 64 - 80 97 - 119 86 - 106 86 - 106 72 - 88
54 - 66 46 - 58 43 - 53 25 - 31
32 - 40
126 - 154 115 - 141 104 - 128 90 - 110
54 - 66 43 - 53
117 - 14394 - 116117 - 14387 - 10787 - 10772 - 90
4443434243434242414343424341434142
444344
43424342
4140464544454645444444
139 - 171 127 - 157 139 - 171 109 - 135 139 - 171 121 - 149 103 - 127 121 - 149 103 - 127 134 - 164 121 - 149 90 - 112
139 - 171 121 - 149 121 - 149 103 - 127 79 - 97
72 - 9062 - 7558 - 72
182 - 224 163 - 201 152 - 186 127 - 157
79 - 97 61 - 75
220 - 280250 - 300220 - 250200 - 240210 - 260110 - 120100 - 12090 - 110
100 - 120
49484847484847474648484748464846474647464744
4648474847454645
212 - 260 194 - 238 212 - 260 158 - 194 212 - 260 194 - 238 158 - 194 188 - 230 158 - 194 236 - 290 188 - 230 139 - 171 212 - 260 194 - 238 188 - 230 158 - 194 121 - 149 121 - 149 121 - 149 103 - 127 97 - 119 61 - 75
72 - 90 255 - 313 255 - 313 231 - 283 194 - 238 134 - 164 121 - 149 97 - 119
4342424142424141404242414240424041
42414241
403945
4344
44434343
103 - 127 94 - 116
103 - 127 81 - 99
103 - 127 90 - 110 76 - 94 90 - 110 76 - 94
99 - 121 90 - 110 67 - 83
103 - 127 90 - 110 90 - 110 76 - 94 58 - 72
135 - 165 121 - 149 112 - 138 94 - 116
58 - 72 45 - 55
450 - 550
225 - 275 180 - 220
135 - 165 108 - 132 90 - 110
108 - 132
515049
5150494949
48
4747
342 - 418 414 - 506 165 - 203
197 - 241 93 - 115 82 - 102 77 - 95 82 - 102
72 - 90
93 - 115 82 - 102
4847474647474646454747464745474546
464546
454746474644454450
4849
4948484847
157 - 193 144 - 176 157 - 193 117 - 143 157 - 193 144 - 176 117 - 143 139 - 171 117 - 143 175 - 215 139 - 171 103 - 127 157 - 193 144 - 176 139 - 171 117 - 143 90 - 110
90 - 110 76 - 94 72 - 88
54 - 66 189 - 231 189 - 231 171 - 209 144 - 176 99 - 121 90 - 110 72 - 88
765 - 935
373 - 457 306 - 374
198 - 242 180 - 220 144 - 176 180 - 220 135 - 165
SuperLine
Schneidstoff Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UFTyp
Gu
hri
ng
no.
Guhring std.Guhring std.
ap = 1 x D ap = 2 x D ap = 1 x D ap = 1 x D ap =1 x D ap = 1 x D ap = 1 x D ap = 2 x D ap = 1 x D ap = 2 x D ap = 1 x D
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.vc
m/minFc no.
vc m/min
Fc no.
ap 1.5 x D = 50%ae 0.25 x D = 150%
ap 0.5 x D = 75%ap 2 x D = 50%
ap 0.5 x D = 120%ap 2 x D = 50%
ap 0.5 x D = 120%ap 2 x D = 50%
ap 1.5 x D = 50%ae 0.25xD = 140%
ap 0.5 x D = 120% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50% ap 3 x D = 50% ap 2 x D = 50%
Finishing
ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.5-1.0 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D ae = 0.1 x D
74 SuperLine
SL program Machine Taps
for through holes DIN 371Tool material HSS-E PM HSS-E
Guhring no. 5560 5590 5558 5587 5588 5559
Type N N H H VA VA
Form B B B B B B
Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H
Surface finish S C S
nominal Ø-range
M 3 … M 10d
1
l 1
SW
d 2
l 2 dk
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
SCAbright steam tempered nitrided TiAIN TiCN TiN
M 3 0.50 3.5 2.7 2.50 56 10M 4 0.70 4.5 3.4 3.30 63 12M 5 0.80 6.0 4.9 4.20 70 14M 6 1.00 6.0 4.9 5.00 80 16M 8 1.25 8.0 6.2 6.80 90 20M 10 1.50 10.0 8.0 8.50 100 22
7.04 11.53 7.52 17.94 12.25 8.987.04 12.01 7.52 17.94 12.37 8.987.04 12.37 8.24 19.29 13.35 9.597.04 14.92 8.24 19.29 16.74 8.989.46 19.65 10.07 21.47 17.94 10.6710.67 21.71 12.61 24.26 22.68 13.23
75SuperLine
for through holes DIN 371Tool material HSS-E
Guhring no. 5561 5586 5557 5550 5595
Type N N Al GG GG
Form B B B C C
Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H 6HX
Surface finish S A
nominal Ø-range
M 3 … M 10
d 1
l 1
SW
d 2
l 2 dk
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
for cast-materials
for Al and Al-alloys
for high tensile mat. 800...1200 N/mm2
for stainless andacid resistant steels
for general steels≤ 800 N/mm2
for universal applications≤ 1000 N/mm2
M 3 0.50 3.5 2.7 2.50 56 10M 4 0.70 4.5 3.4 3.30 63 12M 5 0.80 6.0 4.9 4.20 70 14M 6 1.00 6.0 4.9 5.00 80 16M 8 1.25 8.0 6.2 6.80 90 20M 10 1.50 10.0 8.0 8.50 100 22
7.04 10.55 7.52 7.52 21.597.04 11.05 7.52 7.52 22.077.04 12.01 8.24 7.52 22.447.04 13.83 8.24 7.52 22.449.46 17.59 9.59 9.59 27.6510.67 21.11 11.53 12.01 35.18
76 SuperLine
M 12 1.75 9 7 10.20 110 24M 16 2.00 12 9 14.00 110 26M 20 2.50 16 12 17.50 140 32
for through holes DIN 376Tool material HSS-E
Guhring no. 5563
Type N
Form B
Tolerance zone ISO 2/6H
Surface finish
nominal Ø-range
M 12 … M 20
d 1
l 1
SW
d2
l 2 dk
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
SL program Machine Taps
SCAbright steam tempered nitrided TiAIN TiCN TiN
17.8326.6840.27
77SuperLine
M 3 0.50 3.5 2.7 2.80 56 10M 4 0.70 4.5 3.4 3.65 63 12M 5 0.80 6.0 4.9 4.65 70 14M 6 1.00 6.0 4.9 5.55 80 16M 8 1.25 8.0 6.2 7.40 90 18M 10 1.50 10.0 8.0 9.25 100 20
for through holes and blind holes ~DIN 371Tool material HSS-E
Guhring no. 5598
Type N
Form C
Tolerance zone 6HX
Surface finish S
nominal Ø-range
M 3 … M 10
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
for cast-materials
for Al and Al-alloys
for high tensile mat. 800...1200 N/mm2
for stainless andacid resistant steels
for general steels≤ 800 N/mm2
for universal applications≤ 1000 N/mm2
SL program Fluteless Taps
dk
d 1
l 1
SW
d 2
l 2
P
16.8617.3518.4421.3524.3831.29
78 SuperLine
for through holes and blind holes ~DIN 376Tool material HSS-E
Guhring no. 5599
Type N
Form C
Tolerance zone 6HX
Surface finish S
nominal Ø-range
M 12 … M 16
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
M 12 1.75 9.0 7.0 11.25 110 24M 14 2.00 11.0 9.0 13.10 110 26M 16 2.00 12.0 9.0 15.10 110 26
SL program Fluteless Taps
SCAbright steam tempered nitrided TiAIN TiCN TiN
d k
d 1
l 1
SW d 2
l 2
P
36.8756.0358.58
79SuperLine
Tool material HSS-E
Guhring no. 5554 5592 5552 5591
Type N R40 N R40 H R40 H R40
Form C C C C
Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H
Surface finish S C
nominal Ø-range
M 3 … M 10
d1
l1
SW
d2
l2 dk
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
for blind holes DIN 371
M 3 0.50 3.5 2.7 2.50 56 6.00M 4 0.70 4.5 3.4 3.30 63 7.50M 5 0.80 6.0 4.9 4.20 70 8.50M 6 1.00 6.0 4.9 5.00 80 11.00M 8 1.25 8.0 6.2 6.80 90 14.00M 10 1.50 10.0 8.0 8.50 100 16.00
for cast-materials
for Al and Al-alloys
for high tensile mat. 800...1200 N/mm2
for stainless andacid resistant steels
for general steels≤ 800 N/mm2
for universal applications≤ 1000 N/mm2
8.98 11.89 7.52 13.098.98 12.98 7.52 13.718.98 13.71 8.24 14.798.98 16.50 8.24 18.8110.67 18.68 10.07 21.7112.61 22.68 12.61 27.90
80 SuperLine
Tool material HSS-E
Guhring no. 5553 5596 5555 5594 5551
Type VA R40 VA R40 N R40 N R40 Al R45
Form C C C C C
Tolerance zone ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H ISO 2/6H
Surface finish S S
nominal Ø-range
M 3 … M 10
d1
l1
SW
d2
l2 dk
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
for blind holes DIN 371
M 3 0.50 3.5 2.7 2.50 56 6.00M 4 0.70 4.5 3.4 3.30 63 7.50M 5 0.80 6.0 4.9 4.20 70 8.50M 6 1.00 6.0 4.9 5.00 80 11.00M 8 1.25 8.0 6.2 6.80 90 14.00M 10 1.50 10.0 8.0 8.50 100 16.00
SL program Machine Taps
SCAbright steam tempered nitrided TiAIN TiCN TiN
9.59 13.47 8.98 12.98 7.529.59 13.59 8.98 13.59 7.529.59 13.95 8.98 13.95 8.249.59 14.55 8.98 16.25 8.2412.61 20.25 10.67 18.20 9.5914.55 25.11 12.61 23.53 11.53
81SuperLine
for blind holes DIN 376Tool material HSS-E
Guhring no. 5589
Type N R40
Form C
Tolerance zone ISO 2/6H
Surface finish
nominal Ø-range
M 12 … M 20
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
M 12 1.75 9 7 10.20 110 18.50M 16 2.00 12 9 14.00 110 20.00M 20 2.50 16 12 17.50 140 25.00
for cast-materials
for Al and Al-alloys
for high tensile mat. 800...1200 N/mm2
for stainless andacid resistant steels
for general steels≤ 800 N/mm2
for universal applications≤ 1000 N/mm2
d1
l1
SW
d2
l2 dk
18.5627.1640.88
82 SuperLine
Tool material Carbide-UF
Guhring no. 5593
Type H
Form C
Tolerance zone ISO 2/6H
Surface finish
nominal Ø-range
M 4 … M 10IC ≥ M5
Diametermm
Lengthsmm
nominalØ
pitch shankØ
squareSW
tapping size hole
totallength
thread length
d1 d2 l1 l2 Unit price in £
for through holes and blind holes DIN 371
M 4 0.70 4.5 3.4 3.30 63 10M 5 0.80 6.0 4.9 4.20 70 10M 6 1.00 6.0 4.9 5.00 80 12M 8 1.25 8.0 6.2 6.80 90 16M 10 1.50 10.0 8.0 8.50 100 18
SL program Machine Taps
bright
d 1
l 1
SW
d2
l 2 dk
35.0362.0153.1480.2586.33
83SuperLine
Product information• Ø > 4,0 mm with highly
unequal flute spacing• left hand spiral flutes• tolerance: from Ø 0.98 to 5.03 mm: 0.000/+0.004 from Ø 5.97 to 12.05 mm: 0.000/+0.005
NC machine chucking reamers are si-milar to DIN 8093 with straight shank (h6) for standardised tool clamping in hydraulic or shrink fit chucks. The combination of NC machine chucking reamer and hydraulic, high precision clamping or shrink fit chuck respec-tively offers highest concentricity and process reliability for the production of holes to required tolerances.
Tool material Carbide-UF
Carbide grade K10
Guhring no. 5527
Form
Type
Tolerance see product information
Surface finish
Cutting direction right
Ø-range mm
0.98 … 4.01
Diametermm
Lengths mm
nominalØ
shankØ
total length effective length
flute length no. of flutes
d1 d2 l1 l2 l4 z Unit price in £
SL program Reamers
NC machine chucking reamers Guhring std.
0.980 4 50 22 6 30.990 4 50 22 6 |1.000 4 50 22 6 |1.010 4 50 22 6 |1.020 4 50 22 6 |1.030 4 50 22 9 |1.480 4 50 22 9 |1.490 4 50 22 9 |1.500 4 50 22 9 |1.510 4 50 22 9 |1.520 4 50 22 9 |1.530 4 50 22 9 31.980 4 50 22 12 41.990 4 50 22 12 |2.000 4 50 22 12 |2.010 4 50 22 12 |2.020 4 50 22 12 |2.030 4 50 22 12 |2.480 4 60 32 16 |2.490 4 60 32 16 |2.500 4 60 32 16 |2.510 4 60 32 16 |2.520 4 60 32 16 |2.530 4 60 32 16 42.970 4 64 36 17 62.980 4 64 36 17 |2.990 4 64 36 17 |3.000 4 64 36 17 |3.010 4 64 36 17 |3.020 4 64 36 17 |3.030 4 64 36 17 |3.970 4 77 45 21 |3.980 4 77 45 21 |3.990 4 77 45 21 |4.000 4 77 45 21 |4.010 4 77 45 21 6
bright
d2
l 1
d1
l 4
l2
29.6629.6625.6329.6629.6629.6629.6629.6626.0029.6629.6629.6629.6629.6626.0029.6629.6629.6629.6629.6631.9429.6629.6629.6630.7930.7930.7927.2530.7930.7930.7936.4736.4736.4732.0536.47
84 SuperLine
NC machine chucking reamers Guhring std.
bright
SL program Reamers
Product information• Ø > 4,0 mm with highly
unequal flute spacing• left hand spiral flutes• tolerance: from Ø 0.98 to 5.03 mm: 0.000/+0.004 from Ø 5.97 to 12.05 mm: 0.000/+0.005
NC machine chucking reamers are si-milar to DIN 8093 with straight shank (h6) for standardised tool clamping in hydraulic or shrink fit chucks. The combination of NC machine chucking reamer and hydraulic, high precision clamping or shrink fit chuck respec-tively offers highest concentricity and process reliability for the production of holes to required tolerances.
Tool material Carbide-UF
Carbide grade K10
Guhring no. 5527
Form
Type
Tolerance see product information
Surface finish
Cutting direction right
Ø-range mm
4.20 … 11.97
Diametermm
Lengths mm
nominalØ
shankØ
total length effective length
flute length no. of flutes
d1 d2 l1 l2 l4 z Unit price in £4.020 4 77 45 21 64.030 4 77 45 21 |4.970 6 93 59 26 |4.980 6 93 59 26 |4.990 6 93 59 26 |5.000 6 93 59 26 |5.010 6 93 59 26 |5.020 6 93 59 26 |5.030 6 93 59 26 |5.970 6 93 57 26 |5.980 6 93 57 26 |5.990 6 93 57 26 |6.000 6 93 57 26 |6.010 6 93 57 26 |6.020 6 93 57 26 |6.030 6 93 57 26 |7.000 8 109 69 31 |7.970 8 117 75 33 |7.980 8 117 75 33 |7.990 8 117 75 33 |8.000 8 117 75 33 |8.010 8 117 75 33 |8.020 8 117 75 33 |8.030 8 117 75 33 |8.040 8 125 75 33 |9.000 10 133 81 36 |9.970 10 133 87 38 |9.980 10 133 87 38 |9.990 10 133 87 38 |
10.000 10 133 87 38 |10.010 10 133 87 38 |10.020 10 133 87 38 |10.030 10 133 87 38 |10.040 10 133 87 38 |10.050 10 133 87 38 |11.970 12 151 105 44 6
d2
l 1
d1
l 4
l2
36.4736.4739.6239.6239.6236.0939.6239.6239.6242.7842.7842.7839.2443.2843.2843.2839.6254.5154.5154.5149.6054.5154.5154.5154.5154.5162.4762.4762.4759.3162.4762.4762.4762.4762.4775.21
85SuperLine
NC machine chucking reamers Guhring std.
bright
Product information• Ø > 4,0 mm with highly
unequal flute spacing• left hand spiral flutes• tolerance: from Ø 0.98 to 5.03 mm: 0.000/+0.004 from Ø 5.97 to 12.05 mm: 0.000/+0.005
NC machine chucking reamers are si-milar to DIN 8093 with straight shank (h6) for standardised tool clamping in hydraulic or shrink fit chucks. The combination of NC machine chucking reamer and hydraulic, high precision clamping or shrink fit chuck respec-tively offers highest concentricity and process reliability for the production of holes to required tolerances.
Tool material Carbide-UF
Carbide grade K10
Guhring no. 5527
Form
Type
Tolerance see product information
Surface finish
Cutting direction right
Ø-range mm
11.98 … 12.05
Diametermm
Lengths mm
nominalØ
shankØ
total length effective length
flute length no. of flutes
d1 d2 l1 l2 l4 z Unit price in £11.980 12 151 105 44 611.990 12 151 105 44 |12.000 12 151 105 44 |12.010 12 151 105 44 |12.020 12 151 105 44 |12.030 12 151 105 44 |12.040 12 151 105 44 |12.050 12 151 105 44 6
d2
l 1
d1
l 4
l2
75.2175.2172.0675.2175.2175.2175.2175.21
86 SuperLine
–
5527
≤330 HB
≤40-48 HRC>48-60 HRC
≤240 HB<300 HB≤240 HB<300 HB≤350 HB
––––
≤500>500-850≤850850-1000≤ 700700-850850-1000850-10001000-1200≤750850-10001000-1200≥850-10001000-1200≤850850-1000≥650-1000
≤850≤850≤850
≤1200
≤850 850-1200≤400≤450≤600≤600≤450≤400≤600≤600≤600>600-850≤850850-100
vcm/min
72 7371
181618161816141412181412141212101010866
6201820184
101030304030252535303530302520202020
7272727271717171717171717171717171
717171
7171717171
717173737272727272727272727273737373
74 75bright
Tools with bold feed column no. are preferred choice.
For blind holes with close diameter tolerances choose straight-fluted reamers.
soluble oilneat oilair
Coolant:
< 4.004.005.006.308.00
10.0012.5016.0020.0025.0031.5040.0050.00
> 50.00
0.0800.1000.1000.1250.1600.2000.2000.2500.3150.4000.4000.5000.6300.800
0.1000.1250.1250.1600.2000.2500.2500.3150.4000.5000.5000.6300.8001.000
0.1250.1600.1600.2000.2500.3150.3150.4000.5000.6300.6300.8001.0001.250
Reamer-Ø
mmf (mm/rev.)
Feed column no.
Material examplesFigures in bold = material no. to DIN EN 10 027
Material group Tensile strengthN/mm2
Cool-ant
1.0035 S185, 1.0486 StE P275N, 1.0345 P235GH, 1.0425 P265GH1.0050 E295, 1.0070 E360, 1.8937 P500NH1.0718 11SMnPb30, 1.0736 115Mn371.0727 46 S20, 1.0728 60 S20, 1.0757 46SPb201.0402 C22, 1.1178 C30E1.0503 C45, 1.1191 C45E1.0601 C60, 1.1221 C60E1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr41.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo41.0301 C10, 1.1121 C10E1.7043 38Cr41.5752 14NiCr14, 1.7131 16MnCr5, 1.7264 20CrMo51.8504 34CrAl61.8519 31CrMoV9, 1.8550 34CrAlNi71.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV91.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo41.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 61CrV41.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV41.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305 X8CrNiS18 91.4301 X5CrNi18 10, 1.4541 X6CrNiTi18 10, 1.4571 X6CrNiMoTi 17 12 21.4057 X17CrNi16-1, 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18 2–
Nimonic, Inconel, Monel, HastelloyEN-GJL-100 ... EN-GJL-200 (previously GG10 ... GG20)EN-GJL-250 ... EN-GJL-350 (previously GG25 ... GG45)EN-GJMW-350-4, EN-GJMB-550-4, EN-GJS-500-7 (prev. GTW35, GTS55, GGG50)EN-GJMB-700-2, EN-GJS-700-2 (prev.GTW65, GTS70, GGG70)–3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu23.7154 TiAl6Zr5, 3.7164 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V13.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg13.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,53.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi93.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMgMn2, G-MgAl8Zn1, G-MgAl6Zn32.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb22.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,52.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn2.0790 CuNi18Zn19Pb2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn102.0980 CuAl11Ni, 2.1247 CuBe2Bakelit, Resopal, Pertinax, MoltoprenPlexiglass, Hostalen, Novodur, MakralonKevlarGFK/CFK
Common structural steels
Free-cutting steels
Unalloyed heat-treatable steels
Alloyed heat-treatable steels
Unalloyed case hardened steelsAlloyed case hardened steels
Nitriding steels
Tool steels
High speed steelsSpring steelsStainless steels, sulphured austenitic martensiticHardened steels
Special alloysCast iron
Spheroidal graphite and malleable cast ironChilled cast ironTi and Ti-alloys
Aluminium and Al-alloysAl wrought alloysAl cast iron ≤ 10 % Si > 10 % SiMagnesium alloysCopper, low-alloyedBrass, short-chipping long-chippingBronze, short-chipping
Bronze, long-chipping
DuroplasticsThermoplasticsKevlarGlass, carbon concent. plastics
Hard-ness
0.3000.3000.4000.4000.6000.6000.8000.8000.8001.0001.0001.2001.4001.600
0.5000.5000.7001.0001.4001.4001.8002.2002.2002.5003.0003.0003.0003.000
Feed column no.
Tool material/Carbide grade
Form
Surface finish
Guhring std.
stra
igh
t
Gu
hr.
no.
Carbide/K10
NC machine chucking reamers
Concentrate on your core business tasks. Leave the intelligent tool storage and administration to Guhring. With TM Tool Dispensing Systems the customer benefits from controlled tool availability around the clock, reduction of storage as well as administration costs and transparency of tool consumption, cost allocation as well as stock levels.
TM Tool Dispensing Systems
The new dimension for economic machining
Superline
Drilling
Special tooling SolutionS
Milling
Modular tooling systeMs
tool restoration service
Reaming pcd/pcbTapping/Thread milling/fluTeless Tapping
Countersinking/de-burning
8th EditionSuperline
Guhring Ltd.Castle Bromwich Business Park, Tameside Drive,Birmingham B35 7AG
Telephone: 0121 749 5544Fax: 0121 776 7224 www.guhring.co.uk
No liability can be accepted for printing errors or technical changes of any kind.Our Conditions of Sale and Terms of Payment apply. Available on request.
1118
-VII-
05 •
Pri
nte
d in
Ger
man
y •
2011
Recommended