View
0
Download
0
Category
Preview:
Citation preview
SEANIC OCEAN SYSTEMSDIGITAL CATALOG / SPRING 2017
A C E N T U R I O N C O M P A N Y
SEANICOCEAN SYSTEMS
2
As we near the mid-year point, it’s clear the market will likely not provide the level of recovery everyone hoped for in 2017. With oil below $50
(bbl/WTI) again, operators will be very selective on which projects they fund and the focus will remain on cost-saving solutions, quality, and safety. Seanic recognizes current market conditions may be the norm for some time to come, which is why we continue to highlight products and services in each publication that we believe embrace those competencies.
In this issue, we feature an article on the refurbishment and upgrade of several Vertical Collet Connector Running Tools used with subsea jumper installations. Due to the vast number of existing subsea structures fitted with proprietary connections that interfaced with these tools, a cost-effective means of restoring and, in some cases, upgrading this mature hardware was needed. Even though cost was a factor, quality and safety was paramount in the final decision.
We also feature our ECB cavitation water blasting system. This system was originally developed many years ago to safely and effectively clean marine growth on the relatively soft materials used on strakes and fairings. Since that time, operators have become increasingly more confident in the ECB’s effectiveness; over the last 5 years, the ECB has become an industry standard for UWILD inspections.
Tom AyarsPresident
In our last issue, we announced that Seanic and sister company UES of Aberdeen had joined forces. Now that UES is stocking Seanic ROV tooling for both rental and sale, UES can provide service to the diving, ROV, and decommissioning industries. This month, we talk about their decommissioning cutting shears and how UES can become a sole source for many of your subsea tooling needs.
Seanic is pleased to announce two new distribution partners. Scanmudring in St. Johns, Newfoundland, and Reliance Subsea in Port of Spain, Trinidad. Both companies will be able to support your ROV tooling needs in their regions.
With summer upon us don’t miss an opportunity to utilize Seanic’s 30’ deep test tank to demonstrate your products. With the success of last year’s Demo Days we’ve decided to continue to offer our tank to others in the subsea industry to demo their products in the test pool for no charge.
We hope you find this publication beneficial and welcome any feedback. On behalf of the Seanic employees around the world, we want to thank you for your continued support.
/ From The President 2017
3
CONTENTS
From the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 //
Seanic News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 //
Featured Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 //
Product Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 //
Standard ROV Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 //
Engineered Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 //
UES Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 //
Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 //
Centurion Group Portfolio . . . . . . . . . . . . . . . . . . . . 106 //
Table Of Contents 2017/ 3
4 / Seanic News 2017
WHAT’S NEW AT SEANIC?
Seanic’s Engineered Solutions Group recently completed the refurbishment and upgrade of several Vertical Collet Connector Running Tools for subsea jumper installations. This 15-year-old equipment had been showing its age after many years of offshore service. As such, it was important to restore this mature hardware due to the vast number of subsea structures fitted with proprietary connections with which they interface. Each structure stands over 16-ft tall and weighs 18 to 20 kips.
The owner’s goal was to bring the equipment up to current industry standards and refurbish them to a level of quality equal to or greater than like-new condition. Seanic was selected due to a combination of reasons that ranged from skilled personnel with first-hand
experience in using the equipment; a level of competence related to engineering, documentation, and design; and an effective facility capable of handling hardware of this type.
Upon receipt of the equipment, quality, engineering, and warehouse personnel worked together to disassemble, catalog, and inspect each component of the structures. Each unit was assigned a
VERTICAL COLLET CONNECTOR RUNNING TOOLS REFURBISHMENT
5Seanic News 2017 /
unique identifier that was then marked on every component as it was carefully removed from the system. Disassembly took place in Seanic’s warehouse, and the bridge crane safely and efficiently removed large sub-assemblies. A detailed review of the original material selection and integrity was conducted to ensure it met owner and industry specifications. Additionally, all weldments were stripped of coating and subjected to Non-Destructive Examination and repairs were made when and where necessary.
The structures contained several custom-machined sub-assemblies for installation and actuation. During the process, Seanic had limited availability or access to OEM documentation, making the repair or replacement of some of the sub-components challenging. Once replacement, repair, and final coating of all weldments were completed, the structures were reassembled. The thorough front-end work of Seanic’s Engineered Solutions Group and quality department eliminated any project or
schedule setbacks.
Final testing included hydrostatic testing of the entire hydraulic system and functioning of all actuators, cylinders, and motors. A final System Integration Test proved functionality of the structure to integrate and operate the connection of a subsea jumper.
To learn more about Seanic’s Engineered Solutions Group, please contact info@seanicusa.com.
6 / Seanic News 2017
Underwater Engineering Services (UES), Seanic’s sister company in Aberdeen, is ahead of the curve and well established on the growing decommissioning scene.
Both UES and Seanic specialize in the supply of marine and subsea support equipment to the diving, ROV, and decommissioning sectors within the offshore oil and gas and renewables industries. Featuring several products in this catalog, UES built its reputation by being able to deliver the types of pipeline cutting activities required to remove pipes on-site from either topside or subsea.
Over a 10-year period during which the company carried out almost 7,000 cuts both topside and subsea, UES successfully completed a significant number of decommissioning projects within the U.K. Continental Shelf and Norwegian waters and continued to build
its impressive portfolio. They successfully decommissioned materials such as power cables, umbilicals, flowlines, flexible risers, and rigid pipe.
UES utilizes two types of cutting shear. The first was the Verachtert hydraulic
UES: AHEAD OF THE CURVE
CAT-S80 SHEAR (TOP); VERACHTERT HYDRAULIC SHEAR, VHS-60 (BOTTOM)
7Seanic News 2017 /
shear (VHS 60), which is generally used for topside cutting but can also be configured for subsea deployment. This cutter has the largest mouth opening of the two offered, with an 800-mm opening jaw height and 830-mm jaw depth. It delivers a crushing force of 9,850 kN, making it one of the most powerful cutting performers in the sector.
The second cutting shear was the CAT S80, which can also be used for both topside and subsea decommissioning projects. With a jaw opening of 620 mm and jaw depth 820 mm, this has a crushing force of 8,809 kN. For subsea operations, the CAT S80 has two sets of lifting assemblies to enable it to carry out cuts either horizontally or vertically.
Both cutters have dedicated transit frames that can also be used for deck cutting operations. The shears operate at a maximum of 350 bar and, therefore, a suitable Hydraulic Power Unit (HPU) is essential to provide the necessary operating parameters.
Over the years, UES has delivered tailored equipment packages for topside, subsea, or both, and, depending on the configuration, the equipment supplied may consist of cutting shears, hydraulic power units, control cabin, hose deployment reel, and over boarding equipment.
In recent years, engineers at UES delivered a decommissioning campaign for a North Sea operator, which involved using a twin shear package. The project saw the two shears being used simultaneously on the back deck of a vessel, allowing them to pull in twice the volume of umbilical and double the speed of removal.
Each shear utilized a dedicated HPU, allowing them to operate simultaneously. Also included was a heated control cabin to allow the technicians to operate the equipment at a safe distance and monitor the control systems for both the shears and the HPUs.
SEANIC’S DEMO DAYS & STATE-OF-THE-ART TEST TANK Seanic’s Demo Days was such a success in 2016 they are pleased to announce plans to continue with their Demo Day program in 2017. Seanic’s offer provides other companies in the subsea industry the opportunity to access this state-of-the-art test tank at little or no cost as they demonstrate their products to current and potential clients. Several companies took advantage of this offer last year and the turnout was clearly a success. We’re currently accepting applications from vendors to participate in future Demo Days and would suggest you contact Karen North (knorth@seanicusa.com subject Demo Day) to schedule your event.
Seanic’s facility in Katy, TX (near Houston) includes a full-service test tank, giving clients the ability to test their products in a controlled environment in a cost-effective manner. The tank is 50 ft (15m) square, 30 ft (9m) deep which is large enough to wet-test very large subsea hardware, leaving a work class ROV full access from all sides. It’s reinforced 3 ft (0.9m) concrete base, is designed to accommodate heavy items up to 2000lbs/sq ft (9765 kg/sq m) to be tested.
8 / Seanic News 2017
Seanic is excited to introduce their newly formed distributor partnerships with Scanmudring Canada Inc. in St. Johns, Newfoundland and Labrador, Canada, and Reliance Subsea Services in Port of Spain, Trinidad. After extensive research we concluded these two companies were ideal to partner with, due to geographic location, customer relationships and above all capabilities “says Tom Ayars”, President of Seanic Ocean Systems.
“In today’s environment, our clients need the most flexible, proven solutions,” says Jason Price, Managing Director of Scanmudring Canada. “This partnership further demonstrates our proactive approach to customer collaboration, and our commitment to delivering tailor-made solutions that meet specific client needs. With a large roster of highly-effective, proprietary equipment located in Eastern Canada, our clients will benefit from both time and cost efficiencies.”
Looking to the Future
With the full support of Seanic Ocean Systems, both companies have been outfitted with a pool of ROV rental tools and have the ability to sell and support standard tooling rental activity. Both companies will also liaise with clients on behalf of Seanic for engineering design build projects.
About Scanmudring
With more than 17 years’ experience, Scanmudring has advanced as a global leader in the development, manufacture and operation of advanced subsea heavy machinery for harsh environments. Scanmudring specialize in dredging, excavation and construction work for the oil, gas and renewable energy industries, providing unparalleled operational expertise. Scanmudring is dedicated to providing innovative, robust and reliable solutions that are versatile enough to meet the most demanding subsea challenges.
Scanmudring Canada Inc. is a subsidiary of Scanmudring AS (Norway), and services primarily Eastern Canada and the Artic.
Contact:Jason Price, P.Eng. Managing Director, Scanmudring Canadajasonprice@scanmudring.ca709-325-2299
About Reliance
Reliance Subsea Services (Reliance) is a dynamic company created by local and committed professionals to address a growing subsea market. Reliance specializes in tooling and equipment of all types, manpower support and warehouse provisions.
With a new tooling rental and services facility near the Piarco Airport, and with its proximity to local ports, Reliance becomes the first of its kind in providing rapid response support to Oil & Gas operators and service providers throughout the entire Caribbean Region. Combining this service with the ability to provide engineering, project management, fabrication and storage, Reliance strives to ensure the best quality customer service and world class products to guarantee a long-lasting business relationship built on trust.
Contact: Karishma Maharaj Director of Operationsinfo@reliancesubsea.com868-686-2739
SCEANIC WELCOMES NEW DISTRIBUTOR PARTNERS
9Featured Products 2017 /
Seanic’s ECB cavitation cleaning system was developed to gently and effectively remove barnacles and other marine growth from soft or sensitive surfaces, such as strakes and fairings. Unlike traditional 5,000 or 10,000 PSI water blasters, our ECB unit is capable of cleaning subsea objects with enough force to remove barnacles and deposits without causing damage to soft plastic or rubber surfaces. Traditionally, high-pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and
damage the object being cleaned. Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine. Additionally, this one-of-a-kind marine growth removal device has become an industry standard for risers, moorings, and vessel hulls during underwater inspection in lieu of dry docking, or UWILD as it is commonly called.
ECB SPECIALIZED TOOLSCAVITATION WATER BLASTING: EFFECTIVE CLEANING FOR SUBSEA OBJECTS
PLAY VIDEO FOR DEMONSTRATION
PHOTO CREDIT: AIMS INTERNATIONAL
PRODUCT CATALOG
SPRING 2017
www.seanicusa.comA Centurion Group company
SEANIC STANDARD ROV TOOLING
www.seanicusa.comA Centurion Group company
13ROV Tooling 2017 /
ELECTRIC SMART TORQUE TOOLAPI 17H CLASS 1-4
TECHNICAL SPECIFICATIONSREAL-TIME TORQUE LIMITING
Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.
HIGHLY ACCURATE TORQUE FEEDBACK
As it does not require an HPU for operation, surface testing in the yard or shop environment is easily accomplished. Torque is measured by internal feedback with an accuracy of +/- 2%.
Seanic has designed an Electric Smart
Torque Tool in the tradition of providing
our customers a simple, rugged and
reliable product. The tool has a closed
loop speed/position control system, al-
lowing fine control and angular position
feedback.
Real-time torque limiting gives very ac-
curate torque feedback and control. The
tool is ideally suited for both subsea
and surface applications requiring up to
2000 ft-lbs of torque.
2000 ft lbs MAX TORQUE OUTPUT 120 VAC at 12.5 A max POWER
25 inches LENGTH 120 lbs WEIGHT (AIR)
15 rpm MAX SPEED 15 rpm MAX SPEED
Start/stop; Direction; Speed; Torque Control MOTOR CONTROLS
Latches disengage when power is lost. Same proven latch design as standard Seanic torque tools. Internal electric-driven HPU circuit provides hydraulic power and control.
FULLY AUTOMATED HYDRAULIC-ACTUATED LATCHES
Torque limited by closed loop motor current and strain gauge feedback. Safe Torque Off feature (torque output is immediately disengaged if limit is met).
TORQUE LIMITING AND ALARMING
No changes in accuracy or performance due to pressure and temp changes. Single 3/4” hose houses and protects the cable assembly, replacing multiple hydraulic hoses. Dynamic subsea test
jig designed specifically for ETT use available as option.
125:1 TORQUE MULTIPLIER
Calibrated strain gauge feedback within +/-2%; Input current limiting and alarming; Optional communication (isolated RS232, ethernet); Turns counter, torque output, shaft position displayed
topside; Speed limiting alarming; Resolver-based turns counter accurate to less than 1/10th degree of a revolution.
ADDITIONAL FEATURES
14 / ROV Tooling 2017
SMART TORQUE TOOLAPI 17H CLASS 1-4
TECHNICAL SPECIFICATIONS
RUGGED FEATURES
We have retained the mechanical counter as a backup which allows for failsafe operation if the battery is depleted, but also added a digital display that provides real-time torque and turns both subsea and on the surface, via laptop control.
LOW MAINTENANCE DESIGNThe tool can be supplied as a stand-alone smart tool or with a proportional valve pack, laptop and GUI that can limit torques, control speed and direction and log values.
RELIABLE PERFORMANCE
Our robust latch system provides confidence that you are securely locked into the subsea bucket and will stay that way until you choose to disengage. In the case of an unforeseen power failure, our latches are spring-loaded and will retract, allowing you to safely disconnect from the work site.
The Seanic Smart Torque Tool has
retained the rugged features of its
predecessor and added the technolog-
ically advanced features our customers
require.
LATCHES Spring Return
Robust Dogs
17-4 Hardened Fins
WEIGHT 110 lbs/50 kg (air)
85 lbs/39 kg (water)
MECHANICAL COUNTER
Display in Tenths
Large, easy-to-read numbers
Oil-filled, Independently-sealed housing
Allows failsafe operation if battery is depleted or display is compromised
WHAT’S IN THE BOX+ Subsea Display+ Surface Test Jig and Read Out+ #8 JIC Hoses (2)+ #4 JIC Hose+ Comp Bottle with Fittings + Operating & Maintenance Manual+ Electrical Spares+ Mechanical Spares+ 195CC Motor (2)+ 36CC Motor (2)+ 1-4 End Effector and Test Stem+ Cable Between Tool and Display
15ROV Tooling 2017 /
HI-TORQUE TOOLAPI 17H
TECHNICAL SPECIFICATIONSREMOVABLE 17H CLASS 4 NOSE
Our tool has a removable and exchangeable 17H Class-4 nose that can also be attached to Seanic’s Smart Torque Tool , for a convenient two-in-one functionality.
TWO-IN-ONE FUNCTIONALITYThe hi-torque tool is useful in installing umbilicals and flying leads, opening and closing valves on a Christmas tree, and conjunction with Tool Deployment Units (TDUs).
MECHANICAL TURN COUNTER
A mechanical turns counter, which needs no battery and features highly visible numbers for easy monitoring, eliminates the inherent problems commonly associated with electronic digital counters.
Mechanical (no battery) COUNTER FEATURES
Highly visible numbers
Displays in tenths
Oil-filled, independently sealed housing
72 lbs/33 kg (air) WEIGHT
55 lbs/25 kg (water)
Seanic Ocean Systems has designed an
API 17H and ISO 13628-8 compliant
hi-torque tool to reliably perform a
multitude of subsea applications.
WHAT’S IN THE BOX
+ Surface Test Jig with Topside Digital Readout
+ Hoses
+ Complete Spares Kit
+ 1 High Torque Motor
+ 1 High Torque Adapter
+ Operating & Maintenance Manual
16 / ROV Tooling 2017
MATERIALS 316 SS / 6061 T6 AL / Ni-Al-Brz
DIMENSIONS 17”W x 40”L x 14”H
HYDRAULIC REQUIREMENTS
Two open-center directional control valves
MAX OPERATING PSI & FLOW
Pitch cylinder: 3000 psig at .5 gpm
Roll motor: 3000 psig at 1.75 gpm
FLOT WEIGHT 149 lbs/68 kg (air) - 108 lbs/49 kg (water)
PITCH ANGLE 135⁰ (90⁰ down from horizontal, 45⁰ up from horizontal)
ROLL ANGLE 32⁰ either direction (360⁰ optional configuration depending on application)
MAX HANG WEIGHT ON TT
600 lbs
WHAT’S IN THE BOX
+ #8 JIC Hose (2)
+ #4 JIC Hose (2)
+ Spares Kit
+ Operating & Maintenance Manual
FLYING LEAD ORIENTATION TOOL
TECHNICAL SPECIFICATIONSDURABLE DESIGN
The Seanic Flying Lead Orientation Tool (FLOT) provides the operator a durable design with greater versatility and less overall weight, which means you don’t sacrifice valuable payload.
RIGOROUSLY TESTEDSeanic’s FLOT provides the option of roll up to 360° in certain configurations, giving you the ability to dock flying leads in the most difficult of conditions.
BUILT TO FIT SEANIC TORQUE TOOLThis unit has been designed to fit the Seanic’s torque tool, and has been customized or retrofitted for compatibility with many industry-recognized torque tools.
The Seanic Flying Lead Orientation Tool,
or FLOT, is designed and built for ease
of operation and maintenance. The
tool allows for angular and rotational
orientation of a class 4 torque tool to
aid in connection of flying leads subsea.
Simple design allows for customized
configurations. Built-in load holding
valves ensure safe and reliable pitch
control.
17ROV Tooling 2017 /
SUBSEA TORQUEVERIFICATION UNIT
TECHNICAL SPECIFICATIONSSUBSEA AND SURFACE READINGS
The unit readily attaches to the ROV cage or TMS to provide a reliable assessment of changes in torque output when adjustments are made, without the need to return to the surface.
SIMPLE TORQUE OUTPUT ASSESSMENT
Our verification unit boasts a two-in-one functionality, as it can additionally be used to verify torque adjustments on the surface in place of a normal torque tool test jig.
PURELY HYDRO-MECHANICAL DESIGN
Because it is a purely mechanical piece of equipment, our subsea verification unit has no electronics to fail, batteries to die, wires to break or electrical housings to flood.
WHAT’S IN THE BOX
+ 2,200 ft-lb Gauge (2)
+ 500 ft-lb Gauge (2)
+ Test Stems
+ Operating & Maintenance Manual
Seanic Ocean Systems has a subsea
verification unit that verifies torque
readings of an API 17H Class 1-4
torque tool at depth.
This tool is also available as a dual
gauge unit, subsea switchable between
class 1-2 and 3-4 without the need to
change gauges at the surface. Useful
when multiple tools are being used that
require subsea verification prior to use.
316 L SS MATERIALS
Nickel-Aluminum-Bronze
17-4 SS
API 17H Class 1-2 end effector INTERFACE
API 17H Class 3 end effector
API 17H Class 4 end effector
170 lbs/77 kg (air) WEIGHT
145 lbs/65 kg (water)
2,000 ft-lbs MAX INPUT TORQUE
18 / ROV Tooling 2017
INTELLIGENT VALVE PACK
TECHNICAL SPECIFICATIONSCOMPACT DESIGN
Standard design allows for scaling of valve size and type providing simple rugged function while maintaining compact and light weight form.
CUSTOM SOFTWAREClosed or open loop control, data logging and custom control interfaces are all available options that can be added to the system.
STANDARD OR CONFIGURED TO SUIT Graphical User Interface design can be customized for a wide range of applications.
WEIGHT 87 lb (air)
15 station
68 lb (water)
DIMENSIONS 10 1/4” W x 22” L x 8 3/4” H
FEATURES 15 NG directional control valves, capable of proportional pressure control on 10 stations
Transducers integrated to monitor supply, return and ambient pressure
Clear lid for viewing Diagnostic’s LED’s
Isolated RS232 circuit
Customizable software and valve configurations
30 #4 JIC A/B Outputs; #12 JIC P/T Inputs; Filter included
Seanic Intelligent Valve Packs can be
configured to meet many require-
ments. The pack is designed and built
to operate our Smart Torque Tool, but
can also be configured for other tooling
requirements including FLOT’s and
custom multi-function tools.
REQUIREMENTS Power and Communications:
24 VDC @ 6 amps, RS232
Hydraulic:
3,000 psi @ 20 gpm max
19ROV Tooling 2017 /
TORQUE TOOL ADAPTERAPI 17H CLASS V
TECHNICAL SPECIFICATIONS
API CLASS IV TO API CLASS V
The real beauty of an API 17H Class V adapter is that no hydraulic connection is required, which allows the API 17H Class V tool to be left in place while other API 17H Class IV duties are being performed.
SPRING-LOADED EFFECTOR (OPTIONAL)
The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.
Aluminum housing MATERIALS
Steel gear reduction
17-4 SSTL location fins
17-4 SSTL end effectors
Delrin nose
316 SSTL ROV handle
316 SSTL hardware
0-5,000 ft-lbs TORQUE RANGE
215 lbs/98 kg (air) WEIGHT
170 lbs/77 kg (water)
Seanic has designed and manufactured
an API 17H Class IV to API 17H Class V
torque adapter for use in all standard
API 17H Class V interfaces.
Using an API 17H Class IV and API 17H
Class V tool on the same dive is very
common.
WHAT’S IN THE BOX
+ Surface Test Jig and Read Out
+ Compensator Bottle Complete with Fittings and Gear Oil
+ Spares Kit
+ Operating & Maintenance Manual
20 / ROV Tooling 2017
MATERIALS Stainless steel housing
Steel gear reduction
17-4 SSTL location fins
17-4 SSTL end effectors
Delrin nose
316 SSTL ROV handle
316 SSTL hardware
INPUT INTERFACE API 17H Class 4 male end effector (1.5” square drive)
OUTPUT INTERFACE API 17H Class 7 female end effector (3.5” square drive)
API 17H Class 6 female end effector (2.625” square drive)
WEIGHT 535 lbs/243 kg (air)
425 lbs/193 kg (water)
TORQUE RANGE 5,000-25,000 ft-lbs
TORQUE TOOL ADAPTERAPI 17H CLASS 6/7
TECHNICAL SPECIFICATIONSLATCHING OR NON-LATCHING CONFIGURATIONS
The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.
NO HYDRAULIC INTERFACE NECESSARY
The tool requires no electrical or hydraulic interface, freeing the ROV to leave it in place and perform other subsea operations.
Seanic has designed and manufactured
an API 17H Class 6/7 torque adapter
for use in all standard API 17H Class
6/7 interfaces.
The tool is ideally suited for any subsea
application requiring up to 25,000 ft-lbs
torque.
WHAT’S IN THE BOX
+ Surface Test Jig and Read Out+ Standard Nosecone+ Class 6/7 End Effector and Test Stem+ Compensator Bottle Complete with Fittings and Gear Oil+ Spares Kit+ Vector Nosecone (optional)+ Operating & Maintenance Manual
21ROV Tooling 2017 /
17 H/D HOT STABSAND RECEPTACLES
TECHNICAL SPECIFICATIONS
Seanic manufactures and stocks a wide
variety of API/ISO standard hot stabs
and receptacles to meet your needs.
Using the highest quality materials
and stringent quality program ensures
our products perform in the harshest
subsea environment.
Handles are 316 SS MATERIALS
Bodies are Xylane coated Nitronic 60
Female receptacles are Nitronic 50
Nose tips are Ni-Al-Brz
Fittings and fasteners are 316 SS
O-rings are:
70 Durometer HNBR on Dummy Stabs
90 Durometer HNBR on PSI Stabs
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
ROV FRIENDLY COMPLIANT HANDLES 316 SS
All products are accompanied with material certification of US manufacture as well as pressure test reports.
PRESSURE RATINGS TO 20,000 PSI Pressure ranges are from 5,000-20,000psi on all models.
OTHER MATERIALS AVAILABLE UPON REQUEST
Stabs and manifolds conform to API 17D or API 17H (ISO 13628-8) and can be configured with various fitting sizes and types.
22 / ROV Tooling 2017
MATERIALS Stainless steel
DEPTH RATING Full ocean depth
WEIGHT 11 lbs/5 kg
PADDLE VALVES
TECHNICAL SPECIFICATIONS
CORROSION-RESISTANT
Seanic’s paddle valves, manufactured entirely from durable and corrosion-resistant stainless steel, are designed with hard stops to prevent an ROV from over-torquing and avoid costly damage to the valve stem.
ROV-OPERABLE INTERFACESeanic’s paddle valves meet the industry standard API 17H specifications for ROV interface tooling.
20-YEAR DESIGN LIFEDesigned with longevity in mind, our stainless steel paddle valves resist the damaging effects of subsea corrosion and boast a 20-year design life.
Seanic Ocean Systems offers ROV-op-
erable ball valve interfaces to comple-
ment the wide array of subsea ball,
needle and directional control valves
currently on the market.
Seanic’s commitment to durable design
and construction ensures that your
tools will hold up under the demands of
the subsea environment.
We maintain a constant supply of pad-
dle valves in stock, and can additionally
provide your team with the necessary
valve components to suit your project
needs.
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
23ROV Tooling 2017 /
Stainless Steel MATERIALS
Nickel-Aluminum-Bronze
HDPE
65 lbs/29 kg (air) WEIGHT
28 lbs/13 kg (water)
24.5”W x 18”H DIMENSIONS
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
+ Spare Scotch Brite® Pads
+ Spare Hardware
HUB CLEANING TOOLAPI STANDARD OR CUSTOM
TECHNICAL SPECIFICATIONSREMOVES MARINE GROWTH
Seanic Ocean Systems has created a specially designed tool for the removal of fouling and marine growth from wellhead sealing surfaces prior to AX/VX gasket installation.
MANIPULATOR- OR HYDRAULIC-DRIVEN
The hub cleaning tool can be manipulator-driven or built for hydraulic operation, and is available to fit all API standard or other customer-requested hub sizes.
DESIGN ELIMINATES EXPOSED HARDWARE TO WELL BORE
A valuable instrument for subsea construction or drilling work, the hub cleaning tool features no bolts or pieces that could potentially fall into the wellhead, eliminating the risk of costly damage and retrieval efforts.
This tool creates a clean and polished
sealing surface to allow a gasket to
attain a reliable seal, minimizing opera-
tional risks.
Our HUB Cleaning Tool can be built with
a scrubbing surface of various Scotch-
Brite® pads or brushes to further break
up tough marine deposits.
24 / ROV Tooling 2017
GASKET REMOVAL TOOL AX/VX AND CUSTOM DESIGN
TECHNICAL SPECIFICATIONSRUGGED, LIGHTWEIGHT DESIGN
This tool can be manufactured to accommodate a variety of industry standards or custom gasket sizes.
RELIABLE REMOVAL AND INSTALLATION
Our gasket removal and installation tool, designed to be positioned by the ROV manipulator, efficiently and reliably replaces standard 18 3⁄4-inch AX and VX style gaskets.
CORROSION-RESISTANT ALLOY CONSTRUCTION
The tool is manufactured using 100% corrosion- resistant alloys, ensuring resistance to corrosion damage and years of dependable subsea operation.
WEIGHT (AIR) WEIGHT (WATER)
18 3/4” 61 lbs 54 lbs
16 3/4” 56 lbs 48 lbs
15” 50 lbs 42 lbs
MATERIALS Stainless steel
Nickel-Aluminum-Bronze
Seanic Ocean Systems has designed
and manufactured a variety of ring gas-
ket removal and installation tooling that
boasts a rugged yet lightweight design
to perform under the formidable con-
ditions of the deep sea environment. In
addition to the standard configurations
currently in stock, we have engineered
and manufactured custom Max-8 and
Max-14 gasket removal and replace-
ment tool designs that require side
entry to the wellhead (2” and 4” AX).
WHAT’S IN THE BOX
+ AX/VX Tool
+ #4 Size Hose (2)
+ Spare Grip Tape
+ Operating & Maintenance Manual
HIGH-PRESSURE CLEANINGBuilt with longevity in mind, our 5K water blaster requires less frequent gearbox flushing than other similarly powered water blasters on the market.
POWERFUL FLUID INJECTIONIn addition, the blaster can also be used as a high pressure, high-volume pump for rapid and powerful fluid injection.
AVAILABLE FOR RENTALWe maintain a stock of our standard 5K water blaster, and offer the option of customization according to customer needs.
25ROV Tooling 2017 /
5K WATER BLASTERHIGH-PRESSURE
TECHNICAL SPECIFICATIONS
Seanic Ocean Systems has designed
and manufactured high-pressure
Triplex water blasters for a multitude of
purposes. Common applications include
cleaning marine growth from sub-
sea hardware and structures prior to
inspection and applying high pressure
to break up hard materials in mud for
eased dredging.
#8 JIC hoses for supply and return of the motor
INTERFACE
#6 JIC hose motor case drain
#8 JIC high pressure hose for water nozzle
Input: 3000 psi / Output: 5000 psi MAX PRESSURE
Input: 12 gpm / Output: 4.5 gpm MAX FLOW
100 lbs/45kg (air) - 60 lbs/27 kg (water) WEIGHT
15”W x 27”L x 7”H DIMENSIONS
WHAT’S IN THE BOX
+ Compensator bottle complete with gear and oil fittings
+ Spare strainer+ Wand / turbo nozzle+ Gauge panel+ #8 JIC hose (2)+ #6 JIC hose (1)+ #8 5K JIC hose (1)+ Spares kit+ Operating & maintenance manual
26 / ROV Tooling 2017
SUPER GRINDER
TECHNICAL SPECIFICATIONS
REMOVABLE AND REPLACEABLE BLADES
Powered by a commonly used and industry-accepted thruster motor, our Super Grinder features removable and replaceable blades to best suit the task at hand.
CUSTOM SIZE OPTIONS
Our standard 20-inch blade is in stock, and can be manufactured in sizes ranging from 6-30 inches, in addition to custom diameters according to project specifications.
RIGOROUSLY TESTED
This rugged and rigorously tested tool is used for decommissioning, storm repair and recovery and for cutting and removal of jumpers and umbilicals to the surface.
MATERIALS 316 SS frame, shroud and hardware
Painted aluminum housing
17-4 drive shaft
Fiber abrasive grinding wheel
Stainless steel
Nickel-Aluminum-Bronze
Oil of opportunity
Motor requires A & B connection with #8 JIC
Case drain requires C connection with #10 JIC
Requires open center directional flow valve (1)
WEIGHT 120 lbs/54 kg (air)
100 lbs/45 kg (water)
OPERATING PRESSURES
Max operation pressure: 3,000 psi
Max flow rate: 20 gpm
WHAT’S IN THE BOX
+ #8 JIC Hose (3)
+ Spare Abrasive Blades (15)
+ Diamond Blades (upon request)
+ Operating & Maintenance Manual
The Seanic Ocean Systems Super
Grinder is a powerful tool for cutting
materials up to six inches in thickness.
Aside from the standard fiber abra-
sive blade, the super grinder can
operate with blade options including
carbide tooth, carbide brazed, and re
rescue-grade blades to suit the most
demanding of subsea cutting needs.
27ROV Tooling 2017 /
6061 T-6 Aluminum MATERIALS
316 stainless steel
Ampco 45 Nickel-Aluminum-Bronze
Carbon steel (motor)
Polypropylene bristles
Brass or nylon bristles
6 gpm @ 2,000 psi HYDRAULIC REQUIREMENTS
10,000 FSW WORKING DEPTH
WHAT’S IN THE BOX
+ All Hoses Supplied
+ Spare Bristle Pods
+ Citric Acid Pump and Reservoir (as required)
+ Operating & Maintenance Manual
BRUSHING TOOL SINGLE HEAD
TECHNICAL SPECIFICATIONS
CUSTOM-ENGINEERED TO ORDER
Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear.
OPTIONAL CITRIC ACID PUMP
The tool can be outfitted with a reservoir and pump to inject citric acid onto the cleaning site through the brush head, ensuring thorough removal of stubborn calcium growth and marine debris.
REMOVABLE BRISTLE PODS
Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear. Seanic also offers a standard HUB cleaning tool that has an 18 3⁄4-inch diameter brush head, and can be customized to any dimensions to meet your subsea project specifications.
Seanic Ocean Systems has designed
a powerful brushing tool that cuts
through tough marine growth on jacket
legs, wellheads and other structures to
allow for improved inspection, cutting,
or attachment to subsea structures.
The hydraulic-driven rotary brush, held
by the ROV manipulator, safely and
efficiently cleans growth and accumu-
lated debris on subsea structures. The
brush operates to a working depth of
10,000 FSW.
28 / ROV Tooling 2017
INPUT Input 3000 psi @ 20-22 gpm
OUTPUT Output 3000 psi @ 14 gpm
WEIGHT 275 lbs (air)
225lbs (water)
MATERIALS 316 SS
Aluminum
DIMENSIONS 30”W x 36”L x 12”H
WHAT’S IN THE BOX
+ Pump Assembly+ Nozzles/Hoses+ Complete Spares Package Includes Fittings, Hos-es, etc.+ Maintenance Tools and Supplies+ Operating & Maintenance Manual+ Spares Inventory List
ECB UNITSCLEANING METHOD
TECHNICAL SPECIFICATIONSSAFE, THOROUGH CLEANING WITHOUT DAMAGE
Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine for removal of marine growth from vessel hulls, strakes, risers, fairings and moorings.
USED ON STRAKE/FAIRING, UWILD, ETC. Seanic has developed a revolutionary new cleaning method for subsea applications.
RELIABLE, PREDICTABLE RESULTSTraditionally high pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and often damage the object being cleaned.
Seanic has developed a revolutionary
new cleaning method for subsea ap-
plications. By combining low pressure/
high volume pumps and inertial cavi-
tation nozzles, Seanic has developed a
safe and effective ROV powered clean-
ing system. Traditional high pressure
water blasters can be ineffective or
even destructive if used improperly. The
Seanic ECB systems are a field proven
solution for removing marine growth
from vessel hulls, strakes, risers, fair-
ings and moorings.
29ROV Tooling 2017 /
MULTIPURPOSE PUMPS10K-15K PSI
TECHNICAL SPECIFICATIONS
3.8:1 RATIO
Seanic’s multipurpose pumping system has a 3.8:1 ratio and is capable of pumping fluids to a working pressure of 10,000 psi.
CORROSION-RESISTANT DESIGN
The pump is rated for use in 10,000 FSW and is made of corrosion-resistant materials, making it robust and reliable for subsea use.
RATED TO 10,000 FSW DEPTH
The pump is ideally suited for hydrate remediation work, as it can draw a powerful 22 in HG vacuum.
316 SS housings, SS fittings MATERIALS
Ni-Al-Brz piston
78 lbs/35 kg (air) WEIGHT
60 lbs/27 kg (water)
10,000 psi, 2.5 gpm max flow MAX OUTPUT PRESSURE
Max HPU input pressure: 2900 psi OPERATING PRESSURES
Flow rate not to exceed 8 gal/min
Oil of opportunity HYDRAULIC
Requires one open-center directional flow valve
Pump and tank: #6 JIC fittings CONNECTIONS
Input and output: #4 JIC fittings
10,000 FSW WORKING DEPTH
36” x 6” x 8” DIMENSIONS
This unique pump has the ability to
pump a multitude of fluids and can
be used for methanol service with no
risk of cross contaminating the ROV’s
supply oil.
These pumps can be delivered with
a variety of different reservoirs and
directional control valves rated for 10k
and 15k service.
WHAT’S IN THE BOX
+ Spares Kit
+ Operating & Maintenance Manual
30 / ROV Tooling 2017
DYNASET PUMP5K WATER BLASTER
TECHNICAL SPECIFICATIONS
COMPACT SIZE
Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.
RELIABLE PERFORMANCEAt it’s core, the hydraulically driven Dynaset intensifier pump uses filtered sea water and a ROV friendly Turbo nozzle.
LOW MAINTENANCEIn addition, the pump can be used as a high pressure, high flow for rapid and powerful fluid injection.
WEIGHT 25 lbs (air) / 15 lbs (water)
DIMENSIONS 18 in W x 19 in D x 7 in H
MATERIALS Primarily Aluminum 6061-T6 and Stainless Steel
HYDRAULIC CONNECTIONS
Requires (1) open center directional control valve(s). P and T connections are #12 JIC male fittings.
INPUT PRESSURE & FLOW
3,000 PSI @ 30 gpm max
OUTPUT PRESSURE & FLOW
5,000 PSI @ 5.5 gpm
WHAT’S IN THE BOX
+ Spare Hoses
+ Rebuild Kit
+ Operating & Maintenance Manual
The 5k Dynaset Water Blaster pump
system was designed for high pressure,
subsea cleaning.
31ROV Tooling 2017 /
PH PROBE
TECHNICAL SPECIFICATIONSACCURATE SUBSEA PH READINGS
The probe also features a logging function that can record pH readings for later download and analysis.
BATTERY-POWEREDOur pH probe is entirely self-contained and battery powered, with an extensive battery life of approximately 72 hours.
HIGHLY VISIBLE LED DISPLAYThe probe’s red LED display is highly visible in dark water, and features an energy-conserving sleep function that can be switched on or off by flashing the ROV lights.
65 lbs/30 kg (air) WEIGHT
10,000 FSW/3,000 MSW DEPTH RATING
Approx 72 hours display time BATTERY LIFE
54 in L x 7 in diameter (largest) DIMENSIONS
Stainless steel body and display housing
MATERIALS
UHMW probe
Seanic Ocean Systems has designed a
pH probe used to measure and monitor
pH in the subsea environment, partic-
ularly useful in drilling operations and
the prediction of cement returns. The
probe, which features a handle for ease
of manipulation by the ROV, monitors
pH levels within a wellbore and assists
in the accurate prediction of cement
return.
WHAT’S IN THE BOX
+ Spares Kit
+ Solutions
+ Operating & Maintenance Manual
32 / ROV Tooling 2017
TORQUE RECEPTACLEAPI 17D
TECHNICAL SPECIFICATIONS
NICKEL ALUMINUM BRONZE CASTING
Seanic API Torque Receptacles are available in three materials to ensure sound interface and reliable performance with your subsea equipment. We offer torque receptacles in corrosion- resistant stainless steel, durable carbon steel, or a self-lubricating Nickel-Aluminum-Bronze alloy.
NO PAINTING REQUIREDWhile standard torque receptacles are currently in stock, Seanic’s API Torque Receptacle can be modified as needed to meet customer demands for specific projects or custom orders.
BUILT TO API 17H
Our superior quality torque receptacles conform to API 17H and ISO 13628-8 standards, and can be machined to match any custom bolt pattern—providing a seamless connection and guaranteed compatibility with your ROV.
MATERIALS 1020 Carbon Steel
316 L Stainless Steel
Ni-Al-Brz
WHAT’S IN THE BOX
Seanic Ocean Systems maintains a
supply of standard and customizable
API Torque Receptacles in a variety
of materials to interface with an ROV
torque tool. Our bearingless torque
receptacles can be panel-mounted for
reliable docking, valve rotation, and
interface with a torque tool or other
subsea equipment to prevent costly
damage to installation valves.
33ROV Tooling 2017 /
LINEAR VALVE OVERRIDE TOOLLVOT/LAOT
TECHNICAL SPECIFICATIONSROV-DEPLOYABLE The LVOT and lockouts are designed to be deployed through ROV intervention.
THREE LOCKOUT SIZE OPTIONS Custom lockout positions are available.
MANUAL VALVE OVERRIDE
In addition to the LVOT, three different size lockouts are supplied to lock the linearly actuated valve at the 2-inch, 5-inch and 7-inch positions. The LVOT and lockouts are designed to be deployed through ROV intervention.
300 lbs/136 kg (air) WEIGHT
256 lbs/116 kg (water)
3000 psi (rod side) MAX PRESSURE
9115 psi (piston side)
13 inches STROKE
Spring retracts plunger FAIL SAFE
170,000 lbs MAX FORCE
Spring return retracts plunger INTERFACE
The Seanic Linear Valve Override
Tool (LVOT ) is designed to API 17H
specifications to manually override
linearly-actuated valves that have lost
hydraulic control power and returned to
the closed or fail-safe position. Custom
lockout positions are available.
WHAT’S IN THE BOX
+ Type A, B and C Heads+ Intensifier Panels+ Lockouts (as needed)+ Spares+ Spares+ Hoses+ API 17H Hot Stab Receptacle (Dual Port or Single Port)+ Operating & Maintenance Manual
34 / ROV Tooling 2017
GL4 REGAN LATCH RELEASE TOOL
TECHNICAL SPECIFICATIONS
MATERIALS 316 L SS, carbon steel or aluminum
STROKE 3”
OUTPUT 3,000 psi @ 2 gpm
RELEASE FORCE 18,000 lbs
WEIGHT 35 lbs/16 kg (air)
28 lbs/13 kg (water)
SIMPLE, RUGGED AND RELIABLE
Our GL4 Regan Latch Release Tool, designed to be held in the ROV manipulator, enables an ROV to mechanically attach to the top of a guidepost and enable its removal using hydraulic power to compress and disengage the latching mechanism that holds the guidepost in place.
BUILT TO FIT GL-4 LATCHESThe GL4 Regan Latch Release Tool’s hydraulic supply can be either plumbed directly to the ROV, or supplied in the form of a hot stab attachment.
Seanic Ocean Systems manufactures a
GL4 Regan Latch Release Tool for the
disconnection and removal of subsea
guideposts.
The damaged or non-functional
guidepost can then be retrieved to the
surface along existing guide wires.
WHAT’S IN THE BOX
+ Spares Kit
+ Hoses
+ Operating & Maintenance Manual
35ROV Tooling 2017 /
DOCKING CONEAPI/ISO STANDARD
TECHNICAL SPECIFICATIONSAPI/ISO STANDARDS
Our docking cone is built to API/ISO standards guaranteeing ROV compatibility, no matter the application.
HYDRAULICALLY-ACTUATED
The hydraulically actuated docking cone connects to a receptacle and serves as an interface between objects for such purposes as tree and piletop landings, pile alignment, docking to subsea tooling systems, and as a component installed on a Tool Deployment Unit (TDU).
GUARANTEED ROV COMPATIBILITYSeanic can also provide the matching female mating receptacle that can be mounted on the tree or pile for orientation and simplified interface purposes.
316 Stainless Steel MATERIALS
Anodized Aluminum Housing
Delrin Nose Cone
20 lbs/9 kg (air) WEIGHT
16 lbs/7 kg (water)
3,000 psi @ 1 gpm OPERATING PRESSURE
1/4in JIC SIZE FITTINGS
Seanic Ocean Systems manufac-
tures and maintains a supply of API/
ISO standard docking cones for the
stabilization and alignment of an ROV
modular skid.
WHAT’S IN THE BOX
+ Hoses
+ Spare Seals Kit
+ Operating & Maintenance Manual
36 / ROV Tooling 2017
MATERIAL 316/304/17-4 SS
CAPACITY 20,000 lbs max lift
DIMENSIONS 12” L x 12” W x 8 1/2” D
WEIGHT 55 lbs (air)
45 lbs (water)
CYLINDER MAX PRESSURE RATING
3,000 psi
SUBSEA LOAD CELL
TECHNICAL SPECIFICATIONSINSTALLS BETWEEN LIFTING LINE AND LOAD The subsea load cell installs directly between the lifting line and load itself.
EASILY MONITORED BY AN ROVThere are no electrical or battery operated components and the load cell can be easily monitored by an ROV with the large, easy-to-read display.
NO ELECTRICAL/BATTERY OPERATED COMPONENTS
The cells are manufactured of all stainless components and are completely oil-filled so corrosion is not a problem.
The Seanic load cell is designed to
provide accurate, reliable load readings
for the lifting of subsea structures. This
unit is a simple, rugged and reliable
alternative to some of the other high
tech options on the market.
Calibration certifications are good for
one year and can be quickly recertified
annually. The subsea load cell comes
with 2x gauges: one 0-10000 lb cali-
brated and one 0-20000 lb calibrated
and can be interchanged quickly.
WHAT’S IN THE BOX
+ Spare Gauge
+ Operating & Maintenance Manual
37ROV Tooling 2017 /
SUCTION CUPSTICKY FOOT
TECHNICAL SPECIFICATIONSSIMPLE, RUGGED DESIGN
Its high level of suction and grip ensures that an ROV will stay reliably in place when attached to smooth surfaces such as a vessel hull or pipeline.
LOW COSTThe sticky foot can be deployed by the ROV manipulator or hard-mounted to the vehicle in an appropriate location for the job.
CHOICE OF ROV HANDLES
While we have a variety of sizes in stock, our sticky foot can be manufactured to custom shape or size specifications, load holding capacities, and suction levels to ensure reliable performance under any conditions your ROV may encounter.
250 mm SUCTION CUP BELLOWS
10,000 FSW WORKING DEPTH
6061 T-6 Aluminum MATERIALS
316 SS
Rubber
Ampco 45 Ni-Al-Brz
Carbon steel (motor)
Seanic Ocean Systems designs and
manufactures a suction cup sticky foot
that can be built to custom sizes or
suction levels to assist in station-keep-
ing and lifting smooth-surface objects.
9 gpm @ 2,000 psi HYDRAULIC INPUT REQUIREMENTS
250 gpm OUTPUT REQUIREMENTS
45 lbs/20 kg (air) WEIGHT
38 lbs/18 kg (water)
12” x 12” x 20” DIMENSIONS
38 / ROV Tooling 2017
MATERIALS 6061-T6 Aluminum body/handles
Delrin nose piece
316 SS fittings
Buna-N rubber bladder
Buna-N rubber solid seal is also available
WEIGHT 45 lbs (air)
38 lbs (water)
DIMENSIONS 32 in L
13 in OD at handle
SUCTION PILE INTERFACE STAB
TECHNICAL SPECIFICATIONSSECURE MOORING AND ANCHOR
Our stabs can be outfitted with pressure sensors, providing more accurate feedback than gauges and reducing the risk of damage or costly pile collapse.
BUILT TO-ORDEROur suction pile interface stabs are built to order, can be customized to any size, and are rigorously tested onshore to assure product quality and reliable performance at depth.
INFLATABLE SEAL
Seanic’s’ custom-engineered design features an optional inflatable seal to overcome common sealing problems associated with irregularly painted or corroded surfaces inside the stab interface of most suction piles. This provides a secure fit and the ability to tighten the O-ring in the event of rust or scale buildup.
Seanic Ocean Systems manufactures
an ROV friendly suction pile stab
primarily used during the installation of
suction piles.
The stab is also available with a rubber
flap seal option, eliminating the need
for the additional hydraulic power used
to iflate the bladder.
WHAT’S IN THE BOX
+ Spare Bladder
+ Gauge
+ Operating & Maintenance Manual
39ROV Tooling 2017 /
VORTEX DREDGE KIT
TECHNICAL SPECIFICATIONSSALVAGE/MARINE SCIENCE OPERATIONS
The low hydraulic consumption leaves enough hydraulic supply on most ROV’s to utilize a purpose built jetter unit for effective soil breakup.
WROV CONSTRUCTION AND DRILL SUPPORT
Environmental concerns are addressed through the high efficiency, low energy demand hydraulic system negating the need for external compensators.
4 IN TO 6 IN AVAILABLE
This is a completely modular system with many installation options for a variety of ROV’s. The true 4 inch performance with minimum 3.89 inch internal diameter reduces blockages and operates on a lower hydraulic flow.
19 gpm (minimum) FLOW REQUIREMENTS
22 gpm (optimum)
2400 psi (minimum) PRESSURE
4500 psi (maximum)
2800 psi (optimum)
99 lbs / 45 kg (air) WEIGHT
WHAT’S IN THE BOX
+ www.vortexdredge.com
The most powerful 4 inch ROV and
diver dredge in the world is available for
rent. The Vortex has a removal rate per-
formance more commonly seen in the
6 inch dredges. Vortex do not supply
dredges as a combination jetter/dredge
unit, with the belief that it is better to
create the most powerful inlet suction
and combine that with an actual high
pressure jetter unit.
40 / ROV Tooling 2017
DRILLING 6” (150mm) (3/4” shank) maximum diameter annular cutter
HYDRAULIC Requires 3 open centered directional control valves
(4 valves if using optional Slug Ejector function)
WEIGHT 201 lbs/91 kg (air)
171 lbs/77 kg (water)
WHAT’S IN THE BOX
+ Spare Annular Bits
+ Hoses
+ Spare Motor
+ Operating & Maintenance Manual
MAG DRILL
TECHNICAL SPECIFICATIONSHANDLES UP TO 6 IN DIAMETER CORE DRILL
Our Mag Drill is rated for 10,000 FSW and can easily cut holes into any flat or round steel structure with an annular cutter of up to 6 inches in diameter, at various depths-of-cut.
UP TO 4 1/4 IN HOLE DEPTHThis tool is custom engineered and built to meet customer specifications, and can be customized according to hole diameter and drill depth to suit project needs.
ATTACHES TO ROUND OR FLAT SURFACES
Seanic Ocean Systems designs and manufactures a Mag Drill that allows an ROV to attach a drill to any metallic subsea surface to cut holes of varying diameters.
The drill is mounted to the metallic
work site by energizing a lifting magnet
using a hydraulic cylinder as the actua-
tor. The powerful magnet holds the drill
in place to perform precise cuts for the
purposes of decommissioning, salvage,
pinning, flooding or venting.
41ROV Tooling 2017 /
316 SS valve and fittings MATERIALS
Aluminum sample bottle
Flexible PVC collection tube
Compressed gas: 77.7 cu-ft/2.2cu.m BOTTLE CAPACITY
Water: 2.93 gal/11.1 L
Pressure: 3000 psi
WHAT’S IN THE BOX
+ Sample Bottle Assembly
+ ROV Handle
+ Various Relief Valve Springs
+ Spare Funnel
+ Spare Flex Hose
+ Operating & Maintenance Manual
SUBSEA SAMPLE BOTTLE ASSEMBLY
TECHNICAL SPECIFICATIONSCONFIGURABLE
The Subsea Sample Bottle Assembly is used to collect samples of gas bubbles/ fluid from on or near the sea floor.
SAFE AND EASY TO OPERATEThe Subsea Sample Bottle Assembly uses differential pressure to create a vacuum which will allow the gas bubbles/ fluid samples to be captured in the sample bottle subsea.
AVAILABLE FOR RENTAL OR SALE
The Subsea Sample Bottle Assembly is not intended to identify the cause of or source of the gas bubbles/ fluid at the operation site, only to collect samples in a safe and easy way for future analysis.
The Seanic Standard Sample Bottle
system is a safe, simple and effective
tool for gathering subsea samples. Cus-
tom configurations and interchangeable
collection interfaces makes it the right
choice for subsea sampling.
42 / ROV Tooling 2017
SPECIFICATIONS 10,000 PSI @ 5 GPM
2-20 Gallon Reservoirs
4 Point Lifting Slings and Fork Pockets
230/460v/60Hz Electric Motor
DIMENSIONS 76 x 56 x 86
3800 lbs
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
DUAL FLUID HPU
TECHNICAL SPECIFICATIONS3 STATIONS
The Dual Fluid HPU can deliver 10k and 5gpm of either water glycol or traditional mineral based oils.
EACH STATION HAS PRESSURE AND FLOW CONTROL
This unit was built to fill a demand for both hyperbaric chamber testing of ROV tooling as well as providing constant volume flow for high pressure water glycol applications.
Seanic has designed and built a new
Hydraulic Power Unit that is very
unique. The use of a check ball pump
and an electric motor was the differ-
ence between a standard oil HPU that
can’t pump the Water Glycol and the
air driven pumps usually used in this
application.
43ROV Tooling 2017 /
316L or Epoxy Coated Steel MATERIALS
Varies According to Customer Requirements
WEIGHTS & DIMENSIONS
Hot Stab, Paddle Valve, Gauges, Torque Receptacles, LVOT Heads or
Flying Leads
INTERFACE OPTIONS
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
INTERVENTION PANEL
TECHNICAL SPECIFICATIONSAPI/ISO COMPLIANT All panels and components will be under API Guidance to ensure ROV friendliness.
SIMPLE, RUGGED, RELIABLEOur staff has years of experience designing and building this equipment, providing you the confidence it will be done right the first time, every time.
CONFIGURABLE INTERFACE POINT FOR ROV
Seanic can custom design and manufacture ROV Intervention Panels per customer requirements. These can include Hot Stabs and Receptacles, ROV Torque Receptacles, Ball Valve Actuators and Gauges.
Seanic Intervention Panels can be
precision water jet cut from 316 L
Stainless Steel or from Carbon Steel
and painted with a 3 part epoxy process
able to withstand long term subsea
exposure.
44 / ROV Tooling 2017
WEIGHT 345 lbs (air)
280 lbs (water)
DIMENSIONS 43”W x 27 1/4”D x 78”H
FEATURES Clamping range of 12-18” OD
Maximum cut depth of 11 1/2”
DEPTH RATING Infinite depth
HIGH TORQUE MOTOR
Provides 6,000 in-lb torque
MAX PRESSURE 3,000 psi
MAX FLOW 20 gpm
30 INCH SAW
TECHNICAL SPECIFICATIONSSTREAMLINE CLAMP DESIGN
Through this streamlined design, the 30 inch saw provides maximum cut depth with minimal clamping support.
ROV HANDLES FOR HORIZONTAL AND VERTICAL
The clamp design holds the grinder steady ensuring straight cut and preventing blade binding in both horizontal and vertical positions.
OPTIONAL SUPPORT SHOESDiameter range is 12 inches to 18 inches OD with adapter shoes allowing diameters as small as 4 inches.
Seanic introduced the 30 inch saw to
resolve cutting through a single jumper
and eliminating concerns of aligning
multiple cuts.
The clamp design is retroactive, so all
previously purchased 20 inch Super
Grinders can be added to the clamp,
and is easily removed for standalone
applications. The clamp portion may be
used with multiple Seanic Cutting Tools
including both the 30 inch and 20 inch
Super Grinders as well as other cutting
and drilling accessories.
WHAT’S IN THE BOX
+ Spares Kit
+ Operating & Maintenance Manual
www.seanicusa.comA Centurion Group company
SEANIC ENGINEERED SOLUTIONS
www.seanicusa.comA Centurion Group company
47Engineered Solutions 2017 /
ROV SHACKLECUSTOM-ENGINEERED
TECHNICAL SPECIFICATIONS
Seanic Ocean Systems designs and
manufactures a variety of hydraulic
ROV actuation kits for shackles ranging
from 5-500 tons for the purpose of
lowering or lifting heavy equipment to
or from the sea floor without cutting
lifting wires.
ROV shackles adhere to DNV 2.7-1
standards to ensure compatibility for
your subsea needs.
WHAT’S IN THE BOX
+ Dummy Poly Stab
+ API 17H Hot Stabs (optional)
+ Hoses (optional)
+ Operating & Maintenance Manual
HYDRAULICALLY OPERATED
Constructed from an alloy steel and designed for simple operation through the use of an ROV manipulator, this tool enables an ROV to make or break shackle connections hydraulically when adding subsea hardware to a field, landing manifold or other subsea construction.
MECHANICAL OVERRIDE CAPACITY
Seanic’s actuation kits for shackles are built with a mechanical override capacity, in order to make or break shackles without the need for hydraulic power.
CUSTOM-ENGINEERED TO ORDER
Our ROV operable shackle conversions are custom-engineered according to customer specifications, and we have the ability to adapt any shackle to make it ROV-friendly.
WEIGHT (AIR)* WEIGHT (WATER)* DIMENSIONS*
360 lbs/163 kg 311 lbs/141 kg 50” x 14” x 25” 120T
984 lbs/446 kg 910 lbs/412 kg 64” x 14” x 30” 200T
1282 lbs/582 kg 1102 lbs/500 kg 74” x 19” x 36” 400T
*Weights and dimensions for example models shown. ROV shackles can be manufactured in sizes ranging from 5-450 T.
Alloy steel; Stainless steel parts for hydraulic actuators MATERIAL
48/ Engineered Solutions 2017
FLEX JOINT CLEANING TOOLROV COMPATIBLE
TECHNICAL SPECIFICATIONSWORKCLASS ROV COMPATIBLE
The unique deployment system of the tool allows it to be used on any industry-recognized work class ROV.
INTERCHANGEABLE TOOL TRAYSThe tool is designed with interchangeable tool trays, which provide the option to work with various inspection cameras, lasers, temperature probes and cleaning tools.
RELIABLE CLEANING AND INSPECTION
The purpose of the tool is to thoroughly clean the underside of the flex joint by removing excessive marine growth from the elastomer, allowing for optimal inspection.
APPROX WEIGHT 800 lbs/363 kg (air)
~ 20 lbs/9 kg (water)
HYDRAULIC REQUIREMENTS
10 gpm at 3000 psi
Four Open-center Directional Control Valves
MOVEMENT Rotates 190⁰ to 260⁰ in either direction
Brush pole moves up and down and tilts forward and backward to reach corners/transition areas
Transit tray moves pole closer to or away from the riser
WHAT’S IN THE BOX
+ Operating & Maintenance Manual
+ For information regarding what is packaged with this tool, please call Seanic.
The flex joint cleaning tool was de-
signed to clamp around steel catenary
risers with pipeline diameters ranging
from 6 to 24 inches.
The tool is operated by a Seanic tech-
nician through the use of a joystick and
tooling computer with GUI interface
inside the ROV control van.
49Engineered Solutions 2017 /
SEA CHEST COVERSMULTIPLE SIZES
TECHNICAL SPECIFICATIONS
Seanic Ocean Systems has designed
and manufactured ROV-installable Sea
Chest Covers in a variety of sizes, used
for UWILD and for marine maintenance
activities on subsea platforms. During
a UWILD the external hull must be
cleaned and inspected, in addition to
the replacement and/or repair of inter-
nal systems inside the hull.
ROV-FRIENDLY
Seanic’s Sea Chest Covers are used to plug the open flange during inspection and maintenance campaigns. The Sea Chest Cover operation and functionality is imperative to the successful sealing o of the internal hull while personnel and equipment are inside performing the inspection and maintenance.
DEPENDABLE SEALING
The differential pressure at the sea chest flange provides a sealing mechanism allowing for the seal face of the Sea Chest Cover to stay in place and prevent seawater from entering into the sea chest flange. Clamping mechanisms on the sea chest covers provide additional security for the connection and sealing force. An internal bladder on the sea chest is inflated using a seawater injection pump providing an internal sealing element as a secondary measure to prevent any additional seawater from entering the hull in the event of a slow failure of the primary face seal.
EFFICIENT MARINE MAINTENANCE
The design of Seanic’s Sea Chest Covers is ROV friendly, and capable of being deployed and installed efficiently. Seanic’s API 17H FLOT and Class 1-4 torque tool is used to deploy and lock the Sea Chest Cover onto the sea chest flange.
50 / UES Products 2017
UES PRODUCTS
www.seanicusa.comA Centurion Group company
UES Products 2017 / 51
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
UES Standard Electric HPU
Supplied mainly for use with our large range of underwater tools, but also suitable for other applications
Primary structure manufactured in accordance with DNV 2.7‐1
TECHNICAL SPECIFICATION
Max Flow 75 l/min @ 60Hz operation
Max Pressure 320 bar @ 35 l/min 60 Hz operation
Motor 22kW WEG 4 pole 3ph 380/440v 50/60Hz
Starter Star Delta in SS enclosure
Filtration MP Filtri pressure, return & drain
Cooler Bowman seawater heat exchanger
Reservoir 200 litre, low oil & high temp trips
Frame 4 point lift in accordance with DNV 2.7‐1
Dimensions 1492 x 800 x 1615 mm
Weight 1,000 kg
Certification Full certification package for MPI, slings, shackles & load test
Hydraulic Power Pack
MODEL: 22kW
52 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
UES ATEX Zone 1 Electric Hydraulic Power Unit
Supplied mainly for use with our large range of underwater tools, but also suitable for other applications
Primary frame manufactured in accordance with DNV 2.7‐1
TECHNICAL SPECIFICATION
Max Flow 140 l/min @ 145bar, 60Hz operation
Max Pressure 320 bar @ 50 l/min 60 Hz operation
Motor 36kW WEG Ex II 2G EEx d IIB T4 4 pole 3ph 380/440v 50/60Hz
Starter Star Delta in Ex II 2GD EEx d II B T5 enclosure
Filtration Ikron pressure, return & drain
Cooler Bowman seawater heat exchanger
Reservoir 300 litre, low oil & high temp trips
Frame 4 point lift in accordance with DNV 2.7‐1
Dimensions 1650 x 900 x 1870 mm H
Weight 1,500 kg
Certification Full certification package for MPI, slings, shackles & load test
ATEX Zone 1 Hydraulic Power Pack
MODEL: Z1 36kW
UES Products 2017 / 53
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
High powered saw designed for dimensional cutting of metal or masonry materials
Suitable for cutting concrete, structural steel and pipe
10” Abrasive, Diamond or TCT wheel can be fitted
Fitted with an adjustable shoe to allow alterations to cut depth
TECHNICAL SPECIFICATION
Capacity 10” Disc
Arbor 1”
Flow 38‐57 L/min
Pressure 105‐140 Bar
Weight 10.4kg
Length 495mm
Width 280mm
Porting 8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Hydraulic Cut‐Off Saw
MODEL: C023
54 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Ideal for cutting pipe, flexible risers, cables & umbilical
Suitable for topside & subsea operations
TECHNICAL SPECIFICATION
Model Caterpillar S 80
Jaw Opening Height 623 mm
Jaw Opening Depth 840 mm
Base of Jaws Height 525 mm
Max Flow 200 L/min
Max Pressure 350 Bar
Frame 4 point lift in accordance with DNV 2.7‐1
Dimensions 4800 x 1500 x 2400 mm H
Weight 6000 kg. 8000kg w/ frame
Hydraulic Shear Cutter MODEL: CAT S80
UES Products 2017 / 55
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity 0.8m3
Payload 3.5T
Weight 920 kg
No. of Arms 4
Pressure 200 bar
Height closed 1885 mm
Height open 1575 mm
Width closed 1610 mm
Width open 2420 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
3.5Te Demag Peel Grab
56 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Basic Rotary Torque Tool conforming to API 17D Class 1‐4
Robust, no frills tool operable by diver with a suitable hydraulic supply
Direction control valve is close mounted to the torque tool and cross line relief valves are incorporated to allow
torque setting in both CW and CCW rotation
TECHNICAL SPECIFICATION
Interface Class 1‐4
Max Torque 2,700 Nm
Speed 0 ‐ 20 rpm
Flow 0 – 25 l/min
Pressure 175 bar Max
Weight 26kg (in water)
Dimensions 675 x 220 x 300 mm H
Handle Front and rear w/lift point
Porting 1/2” BSP
Tools may be supplied and used in conjunction with UES Torque Manifold and Torque Verification Unit. Supplied as standard c/w 1.5m whips and ¾” Q.D. Couplings
Diver Torque Tool MODELS: KIS17D4
UES Products 2017 / 57
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable hand held tool, designed for use by a diver or ROV
Primarily used for grinding and cutting operations
Suitable with various discs; Abrasive, Diamond, and Polishing Discs
Can also be fitted with Wire & Nylon brushes
TECHNICAL SPECIFICATION
Capacity 7” or 9” Disc
Speed 2700 rpm
Arbor 5/8” UNC
Flow 15‐38 l/min
Optimum Flow 34 l/min
Pressure 70‐175 bar
Weight 6.8 kg
Length 230 mm
Width 230 mm
Porting 8 SAE
Tool supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Hydraulic Grinder MODEL: GR29
58 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Primarily used to deploy hoses, cables & umbilicals for subsea operations
Can be fitted with a twin flow rotary union to power subsea hydraulic tools
TECHNICAL SPECIFICATION
Capacity 300 m Twin Hose Umbilical
Max Pull 1000 kg
Flow 15 – 60 l/min
Pressure 200 bar
Connection 6 m hoses c/w Q.D. Couplings
Drum Dimensions
Core 800 mm
Flange 350 mm
Width 800 mm
Dimensions
Length 1770 mm
Width 1770 mm
Weight 1500 kg Tare, 3000 kg Gross
Certification Full certification package for hose test, MPI, slings, shackles & load test
Hydraulic Reel MODEL: HR300
UES Products 2017 / 59
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity 0.2m3
Payload 5T
Weight 600 kg
No. of Arms 5
Pressure 200 bar
Height closed 1500 mm
Height open 1280 mm
Width closed 900 mm
Width open 1500 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
5Te Peel Grab
60 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable hand held tool, designed for diver use
Primarily used for grinding weld seams and de‐burring holes in steel work
Can additionally be fitted with rotary wire brushes and a variety of abrasive and polishing discs
Can also be adapted for ROV application
TECHNICAL SPECIFICATION
Speed 9450 rpm
Arbor 6 mm Collet
Flow 15‐40 l/min
Pressure 70‐175 bar
Weight 4 kg
Length 350 mm
Width Nose 65 mm
Width Body 91 mm
Porting 8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
Hydraulic Peanut Grinder MODEL: PG04
UES Products 2017 / 61
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Lightweight aluminium construction
Integrated interlock ensures that the blade cannot activate until the anvil is fully deployed
Long life blade ensures that tool maintenance is kept to a minimum
Integrated hydraulic intensifier and internal relief valve
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope) 75 mm Dia. & 1960 N/mm2 grade
Water Depth Any
Max Input Pressure 210 bar
Weight Approx. 43 kg
Height 517 mm
Width 176 mm
Length 390 mm (max, anvil out)
Wire Rope Cutter MODEL: RCV75HD
62 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Robust plated steel and stainless steel construction
All steel components are electroless nickel plated to resist corrosion
Long life blade ensures that tool maintenance is kept to a minimum
Suitable for wire rope, cables and umbilicals
Optional intensifier panel is available
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope) 115 mm Dia. & 1770 N/mm2 grade
Water Depth Any
Max Input Pressure Main Cylinder 690 bar
Max Input Pressure Anvil 210 bar
Height 703 mm
Width 252 mm
Max Length (Anvil Out) 514 mm
Weight (Approx) 125 kg
Wire Rope Cutter MODEL: RCV115
UES Products 2017 / 63
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Heavy duty wire cutter designed for use in severe working conditions
Hydraulically operated anvil for easy ROV deployment
Robust plated steel and stainless steel construction
All steel components are electroless nickel plated to resist corrosion
Long life blade ensures that tool maintenance is kept to a minimum
Suitable for cutting wire rope, cables & umbilical
Optional intensifier panel is available
TECHNICAL SPECIFICATION
Cutting Capacity (Wire Rope) 155 mm Dia. & 1880 N/mm2 grade
Water Depth Any
Max Input Pressure Main Cylinder 690 bar
Max Input Pressure Anvil 210 bar
Height 867 mm
Width 277 mm
Length (Max) 592 mm
Weight (Approx) 240 kg
Wire Rope Cutter MODEL: RCV155
64 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES
+44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Unique hydraulically controlled chain caliper, designed to measure one chain link length.
Lightweight aluminium construction mounted with sheet buoyancy. Supplied complete with digital
displacement readout.
Features an adjustable fixed arm, and a range of dynamic arm options, offering a 200mm measurement
range for chain link lengths of 600 to 1100mm.
Vertical members of the tool engage over the link diameters first, up to a 180mm max. chain diameter. A
range of horse shoe pads can be supplied to engage against smaller diameter chain.
TECHNICAL SPECIFICATION
Range 600-1100 mm (200mm increments)
Tool Accuracy +/- 0.3 mm
Max. Chain Dia. 180 mm
Weight in Air 42 kg
ROV Handle Fish tail and flex joint
Max Pressure 30 bar
Max Force 0.4 Te
Hydraulic Interface 4m hose c/w 4JIC ends (alternative end fittings AOR).
Instrument Interface Supplied with Micro Subconn c/w voltage network
UES Ltd. can also supply a range of Go NoGo Gauges for reference chain diameter & interlink measurement, please contact us to discuss your requirements.
ROV Chain Caliper MK3
UES Products 2017 / 65
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Ideal for drilling holes of up to 100mm diameter in steel structures
Easily adapted to mount onto steel beams and tubular members
Can be secured via clamps, straps or magnets, with various bases to suit a range of applications
Fitted with manual down‐feed and has a spring‐centred control valve for added operator safety
TECHNICAL SPECIFICATION
Capacity 100 mm Dia
Speed 50‐250 rpm
Arbor ¾” Dia
Flow 0‐35 l/min
Pressure 70‐175 bar
Length 440 mm
Width 230 mm
Height 540 mm
Porting ½” BSP
Weight 25kg
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
Subsea Drill Rig
MODEL: SDR100
66 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Compact & lightweight tool designed to cut soft lines, polypropylene and fibre ropes
Utilises a low pressure supply from the vehicle, eliminating the need for a high pressure intensifier
Constructed from stainless steel and coated alloys to provide the optimum level of light weight and
corrosion resistance
TECHNICAL SPECIFICATION
Capacity 54 mm Dia
Pressure 210 bar
Weight 4.52 kg
Length 410 mm
Width 150 mm
Depth 44 mm
Porting ¼” BSP
Softline Cutter MODEL: SL55
UES Products 2017 / 67
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Heavy duty hydraulically operated soft and fibre line cutting tool
Lightweight aluminum & stainless steel construction
Diver or ROV operable design
Available with detachable handle kit
TECHNICAL SPECIFICATION
Capacity 80 mm Dia
Pressure 690 bar
Weight 14.2 kg
Length 647 mm
Width 188 mm
Depth 138 mm
Porting ¼” BSP
Softline Cutter MODEL: SL80
68 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable, handheld tool for diver use
Ideal for use in tight spaces
Can be adapted for ROV application
TECHNICAL SPECIFICATION
Operating Pressure 90‐140 Bar
Working Pressure 90 Bar
Capacity 1.8 kW
Displacement 20‐50 l/min
Free Speed 5500 ± 5% U/min
Peripheral Speed Max 52.2 m/s
Max Disc Size 180mm
Holder and Thread 22.2mm Dia. M14
Dimensions 570 x 250 x 150 mm
Weight (without holder & protecting disc) 6.7 kg
Weight (total) 7.6 kg
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Spitznas Angle Grinder MODEL: 5” AG
UES Products 2017 / 69
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
An alternative to rotary disc cutters, suitable for a variety of materials
Various pitch and length of blades can be offered depending on the hardness & size of the material
Pipe clamps and other purpose built clamps can be supplied to aid cutting operations
Twist & lever throttle options available
TECHNICAL SPECIFICATION
Capacity 290mm Dia
Power 2.8Kw
Flow 15‐50 l/min
Pressure 140 bar
Strokes/min 350
Stroke 60 mm
Weight 6.1 kg
Length 600 mm
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Hydraulic Recip Saw
MODEL: Spitznas
70 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Medium to heavy‐duty breaker
Ideal for breaking concrete and small rocks, rod diving and tamping
Well balanced tool for minimum operator fatigue
Trouble‐free diaphragm accumulator provides added punch and reduced coil
Feathering on/off valve to control speed makes startup and initial tool placement more reliable
A variety of breaker points available; flat, moil & spade.
TECHNICAL SPECIFICATION
BR45 BR67
Capacity 1 in Hex Parallel 6” x 1 ¼” Hex
Weight 25 kg 30 kg
Length 65 cm 68 cm
Width 36 cm 40 cm
Pressure 105‐140 bar 105‐140 bar
Max Back Pressure 17 bar 17 bar
Flow Range 26‐34 l/m 26‐34 l/m
Optimum Flow 30 l/m 30 l/m
Porting 8 SAE 8 SAE
Output 1800 Blows/min 1800 Blows/Min
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.
Hydraulic Breakers
MODEL: BR45 & BR67
UES Products 2017 / 71
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable hydraulic chipping hammer
Ideal for chipping concrete, rock, masonry or coral
Compact, lightweight and powerful with a shock & heat insulated body
TECHNICAL SPECIFICATION
Capacity 0.58” x 2 ½” shank steel bits
Flow 26‐34 l/min
Pressure 70‐140 bar
Weight 7.25 kg
Length 430mm
Width 80mm
Porting 8 SAE
Tool Steels Wide chisel, Moil point, Flat chisel Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Stanley Chipping HammerMODEL: CH15
72 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Powerful, lightweight, portable hydraulic drill completely sealed for underwater operation
The drill features a reverse facility
Compatible with a range of drill bits up to 18mm Dia.
Fitted with a trigger guard and a dual position assist handle
TECHNICAL SPECIFICATION
Capacity ½” Chuck
Speed 350‐1500 rpm
Torque 27 Nm
Flow 15‐45 l/min
Pressure 70‐140 bar
Weight 3.6 kg
Length 230 mm
Width 100 mm
Porting 8 SAE Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Stanley Hydraulic Drill MODEL: DL07
UES Products 2017 / 73
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hand held tool designed for use by a diver or ROV
Provides exceptional output torque from a compact & lightweight tool
TECHNICAL SPECIFICATION
Capacity ¾” Square Drive
Torque 340‐1630 Nm
Flow 15‐45 l/min
Optimum Flow 30 l/min
Pressure 70‐140 Bar
Weight 6 kg
Length 240 mm
Width 102 mm
Porting 8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Hydraulic Impact Wrench
MODEL: IW12
74 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hand held tool designed for use by a diver or ROV
Provides exceptional output torque from a compact & lightweight tool
TECHNICAL SPECIFICATION
Capacity 1” Square Drive
Torque 680‐3400 Nm
Flow 25‐45 l/min
Optimum Flow 30 l/min
Pressure 105‐140 Bar
Weight 12 kg
Length 370 mm
Width 110 mm
Porting 8 SAE
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Hydraulic Impact Wrench
MODEL: IW16
UES Products 2017 / 75
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Used to confirm operational output from any Rotary Torque Tool conforming to API 17D Class 1‐4 or 17H Hi‐
Torque
Consists of high accuracy torque transducer mounted within a standard Class 1‐4 or Hi‐Torque receptacle
Electronic output from this unit is fed to a 5 digit LED hi visibility display
Rugged housing deep water rated (3000m)
TECHNICAL SPECIFICATION
Interface API 17D Class 1‐4 or API 17H Hi‐Torque
Max Torque 2,700 Nm
Input Adaptors:
Class 1 & 2 17.5 mm Square
Class 3 28.6 mm Square
Class 4 38.1 mm Square
17 H 35.0 mm Square
Weight 37 kg
Length 370 mm
Width 500 mm
Height 550 mm
Subsea Torque Verification Unit MODEL: Subsea TVU
76 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Diver or ROV operable
Specifically designed to cut large diameter cable, hauser, wire rope and other materials with ease
Twin discs result in reduced cutting times, increased disc life and safe operation
TECHNICAL SPECIFICATION
Max Cut Dia. 125 mm
Max Speed 4000 rpm
Flow 34 l/min
Pressure 210 bar
Weight 14.7 kg
Length 550 mm
Width 500 mm
Depth 250 mm
Mounting ‘T’ bar or Fishtail
Twin Disc Cutter MODEL: TDC125
UES Products 2017 / 77
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Used in conjunction with a UES Torque Tool and displays the number of turns +/‐ made by the Torque Tool output
drive socket, and in addition TC2 displays output torque
Stand‐alone units, and installation does not require complex control system or datalink
Inbuilt light sensors actuate the display when illuminated by ROV or diver light, allowing the instrument to lay
dormant when not required, increasing battery life
TECHNICAL SPECIFICATION
Display 5 Digit (14mm) LED +/‐ 999.9
Depth Rating 3,000 m
Battery Rechargeable NiMh D cell
Activation Light sensor
Count reset Magnetic reed switch
Length 200 mm
Width 80 mm
Body Dia. 50 mm
Weight 1.6 kg (Air), 1.1 kg (Water)
Turns Count & Torque Readout MODELS: TC1 & TC2
78 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses
Target material is placed in the open jaw of the cutter
Hydraulic pressure supplied from a separate source (ROV or deck HP Pack)
Capable of supplying pressure up to 700 bar, with a 0.5 l/min flow applied to complete the cutting operation
TECHNICAL SPECIFICATION
Max Cutting Capacity 38 mm
Wire Rope 38 mm
Height 327 mm
Width 100 mm
Depth 130 mm
Cyl. OD 82 mm
Operating Pressure 700 bar
Swept Volume 145 cc
Approx. Weight 15.2 kg
Hydraulic Cutter MODEL: UHC38
UES Products 2017 / 79
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses
Target material is placed in the jaw of the cutter and the anvil pin Is then inserted, retaining the material
Hydraulic pressure is supplied from a separate source, typically a deck mounted HPU
A supply pressure of 700 bar and flow of 0.5 l/min is applied to complete the cutting operation
TECHNICAL SPECIFICATION
Operating Pressure 700 bar
Max Cutting Capacity Ø80 mm
Wire Rope Ø75 mm
Swept Volume 510 cc
Approx Weight 42 kg
Length 416 mm
Outer Diameter 174 mm
Hydraulic Cutter MODEL: UHC80
80 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for all coarse and bulky materials
Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped
Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs
Grab can be operated from a standard HPU and powered Umbilical reel
TECHNICAL SPECIFICATION
Arm Capacity 3.0m3
Payload 10,000 kg
Weight 3,800 kg
No. of Arms 6
Pressure 200 bar
Flow 40‐80 l/min
Height open 2700 mm
Height closed 3360 mm
Width open 4180 mm
Width closed 2360 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings
10Te Vantec Grab
UES Products 2017 / 81
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Ideal for cutting pipe, flexible risers, cables & umbilical
Suitable for topside and subsea operations
TECHNICAL SPECIFICATION
Model Verachtert VSHS60
Jaw Opening Height 800 mm
Jaw Opening Depth 830 mm
Base of Jaws Height 718 mm
Max Closing Force 9850 kN
Optimum Flow 400 l/min
Max Pressure 350 bar
Frame 4 point lift in accordance with DNV 2.7‐1
Dimensions 4780 x 1500 x 1912 mm H
Weight 6500 kg
Hydraulic Shear Cutter
MODEL: VHS60
82 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Purpose built to provide a constant tension capability with up to a 12 Ton maximum back tension
Correct spooling procedures prolongs life of umbilical and reduces risk of damage during operations
Operated from a control panel mounted on the unit
Power is supplied from a Hatz Silent Pack diesel engine making the tensioner a standalone system
TECHNICAL SPECIFICATION
Max Back Tension 12T
Max Line Speed 20 m/min
Drum Size 1800 OD x 500 mm Wide
Hydraulic Power Unit Hatz 44.1kW Diesel, Tandum Dowty Gear Pumps, Air Blast & Seawater Coolers
Controls Local Directional Control Valve & Tension Control Circuit
Operating Monitoring Digital Readouts for Cable Tension, Speed & Length
Frame Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates
Overall Dimensions 4000 x 2000 x 2350 mm H
Weight 7500 kg
12 Te Tensioner
UES Products 2017 / 83
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR POWER SOLUTIONS SAFETY & TECHNICAL UNDERWATER ENGINEERING HYDRAULICS LIMITED SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1224 781555 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk power@atrgroup.co.uk sales@sthyd.com sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Designed to provide hydraulic power and control for Hydraulic Cutter during “Black Ship” situations
Quickly and effectively supplies power up to 630 bar to operate release mechanisms
Features built in 7.5 kW HPU
75L accumulator capacity
TECHNICAL SPECIFICATION
Electrical Supply 7.5 kW, 440 V Accumulator Capacity 75 litres Charge Pressure 300 bar Intensifier Ratio 4:1 Max Outlet Pressure 630 bar Length 1226 mm Width 1020 mm Height 1510 mm Weight 900 kg Gross
Accumulator ER System
MODEL: AER75
84 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
Hydraulic A‐Frame
GENERAL DESCRIPTION
UES Hydraulic Powered A‐Frame
Configured to suit a variety of applications depending on requirements
Complete with integrated control panel
Full deployment package with HPU & Winches available on request
TECHNICAL SPECIFICATIONS
SWL 4000kg
Approx. Weight 2500kg
Approx. Dimensions
Length 4700mm
Width 2200mm
Height (stored) 2900mm
Height (max) 4300mm
UES Products 2017 / 85
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Diesel hydraulic power pack
Supplied mainly for use with our large range of underwater tools, also suitable for other applications
TECHNICAL SPECIFICATION
Max Flow 130 l/min @ 1800 rpm 145 l/min @ 2000 rpm
Max Pressure 320 bar
Pump Kawasaki K3VL80/B‐1NRKM‐P0/1‐H4 80cc/rev variable displacement, pressure and torque control
Motor Hatz –M4L air cooled diesel 1500/2000 rpm
Starter 12v Electric
Filtration MP Filtri pressure, Stauff return & suction
Cooler Bowman seawater heat exchanger
Reservoir 300 litre, level temperature gauge
Fuel Tank 200 litre (244g/kWh @ 50% consumption)
Frame Steel channel base, box section corner posts, 4 point lift
Dimensions 1900 x 1000 x 1400 mm h
Weight 1800 kg wet
Certification Full certification package for MPI, slings, shackles & load test
Hydraulic Power Pack MODEL: Hatz 45kW
86 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Designed for the safe over‐boarding of cables, hoses & umbilicals
Standard design incorporates top rollers to ensure that the product is securely captured within the sheave
Support frame available for deck installation
TECHNICAL SPECIFICATION
Line Pull 10,000 kg
Bend Radius 780 mm
Max Diameter 50 mm
Height 2097 mm
Diameter 1610 mm
Radius To Inner Sheave 780 mm
ROV Sheave
MODEL: DS780‐10
UES Products 2017 / 87
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Primarily used to deploy air, hydraulic or Broco service umbilicals for subsea operations
If required, can be fitted with a twin flow rotary union or electrical slipring
Inverter controlled electrical drive provides a step‐less variable speed operation
TECHNICAL SPECIFICATION
Capacity 300 m Twin Hose Umbilical
Max Pull 750 kg – (600kg) continuous
Line Speed 20 m/min
Drive 5 kW Inverter Drive
Supply 415/440 V, 50/60Hz
Drum Dimensions
Core 800 mm
Flange 350 mm
Width 800 mm
Dimensions
Length 1770 mm
Width 1770 mm
Weight 1500 kg Tare, 3000 kg Gross
Control Manual Joystick
Certification Full certification package for hose test, MPI, slings, shackles and load test
Electric Powered Reel MODEL: HR300E
88 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Ideal for subsea use to make holes for bolts & shackles in shape steel, flat plates etc.
Provides a safe, diver friendly alternative to drilling holes
TECHNICAL SPECIFICATION
Operating Pressure 700 bar
Max Throat Depth 70 mm
Max Punching Thickness 16 mm Mild Steel 6 mm Stainless Steel
Max Punching Diameter 24 mm
Hole Marking Time 11.8 Seconds
Allowable Max Pressure 68.65 MPa (700kgf/cm2)
Max Output 464 kN (47tF)
Ram Stroke 25 mm
Mass (Weight) 25.5 kg
Hydraulic Hole Punch
MODEL: HD07
UES Products 2017 / 89
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable cutter, ideal for steel sections, power cables and umbilical
Designed for use on deck or subsea
Powered directly from a high pressure power pack or from a pressure intensifier
Ideal for rapid abandonment cutting (DP Run‐off) when used with a UES Accumulator package
TECHNICAL SPECIFICATION
Cutting Force 220 Te
Working Pressure 700 Bar
Max Blade Opening 205mm
Dimensions 677 x 264 x 1015mm
Weight 300kg
Hydraulic Cutter MODEL: HGC200
90 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hydraulic deployment reel featuring built in 15kW Hydraulic Power Unit
Primarily used for deployment of hoses, cables & umbilicals for subsea operations
Can be fitted with twin flow rotary union to power subsea hydraulic tooling, using built in HPU
TECHNICAL SPECIFICATION
Capacity 300m Twin Tooling Umbilical Max Pull 1000 kg Flow 15-60 l/min Pressure 200 bar Drum Core Dia. 800mm Drum Flange Dia. 1500mm Drum Width 800mm HPU Motor 15kW Motor WEG 4 pole, 3ph, 380/440v 50/60Hz Motor Starter Star Delta in SS Enclosure Cooler Bowman Seawater Heat Exchanger
Reservoir 200 L, low oil & high temp trips Frame Welded steel channel skid, box section protection frame, c/w
forklift pockets, tie-down plates & 4 point lift in accordance with DNV 2.7-1
Frame Dimensions 1770 x 1770 x 1880(H) mm
Weight ~ 3700kg (Gross)
Certification Full certification package for MPI, slings, shackles, load test & hosing supplied as standard
HPU & Reel
UES Products 2017 / 91
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Portable hand held tool
Lightweight, powerful and easy to manoeuvre, ensuring ease of operation
Can be used with Diamond or Abrasive discs
TECHNICAL SPECIFICATION
Speed 4300 rpm
Power 5.2 kW
Disc Size 400 mm
Disc Type Diamond or Abrasive
Cutting Depth 145 mm
Flow 35‐42 l/min
Pressure 130‐140 bar
Weight 8.3 kg
Length 770 mm
Width 175 mm
Porting ¼” BSP
Tool supplied as standard with 1.5m whips and S/S fittings
Husqvarna Cut Off Saw MODEL: K2500
92 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Uses industry standard MiniBooster intensifier and is of a robust compact design for easy installation into an ROV
Fitted with an integrated safety circuit that automatically bleeds excess pressure, due to temperature or depth
variations, back to tank
Inlet and Outlet pressures can be accurately monitored and the outlet is fitted with a factory set relief valve for
added safety
TECHNICAL SPECIFICATION
Max Outlet 690 Bar 2 LPM
Max Input 172 Bar 14 LPM
Intensifier Ratio 4:1
Water Depth Any
Dimensions 252 x 153 x 144 mm
Weight in air 10 kg
Weight in water 7 kg
Intensifier Panel MODEL: HP690A40
UES Products 2017 / 93
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for spooling wire/umbilical bundles onto winches and cranes under tension
Up to 3T back tension
Integrated diesel hydraulic power unit
May also be used to spool onto storage drums
TECHNICAL SPECIFICATION
Max Drum Capacity 3200 mm Max Drum Dia.
2500 mm Max Drum Width
30 te Max Payload
Max Drum Torque 36kNm
Max Back Tension 3T
Shaft Size 120 mm Dia.
Integral HPU Perkins Diesel, David Brown Pump, Pall Pressure Filter, Air Blast & Seawater Coolers. 210 bar, 80 l/min
Controls Directional Control Valve, Tension Control Circuit, Optional Spooler Guide Frame control circuit
Frame Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates
Overall Dimensions 5000 x 2400 x 2110 mm H (3350 mm H drum filled)
Weight 7000 kg
Certification Full certification package is supplied for the unit, in accordance with all current legislative standards
Drum Spooler
94 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for handling hose umbilical bundles and cables for many applications
Drum can be split to allow installation of various bundles
TECHNICAL SPECIFICATION
Drum Dimensions Core 1067 mm Dia. Flange 2275 mm Dia. Drum Width 1650 mm
Hydraulics Max Pressure 210 bar Flow up to 80 l/min (7rpm)
Max Line Pull 5000 kg
Motor/Brake Hagglund, 11084cc/rev, HD62‐111000‐A0‐R0‐00‐00
Control Walvoil SD 18/2 Motor Spool spring centred. Relief valve set to 110 bar (3te)
Rotary Union Optional – Slew ring bearing 340 mm ID
Couplings Supply & Return 1” Parker 61 Series, Drain ½” ISO7241B
Frame Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4
Dimensions 3100 x 2450 x 2700 mm H
Weight 6500 kg Tare, 10,000kg Gross
Certification Full certification package for hose test, MPI, slings, shackles & load test
Large Hydraulic Reel
MODEL: Hagglund
UES Products 2017 / 95
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Hand held drill provides unrivalled power for both wet and dry diamond drilling applications
Built in torque limiting valve results in little or no kickback or snatch
TECHNICAL SPECIFICATION
Capacity 100 mm Dia.
Flow 20 l/min
Working Pressure 140 Bar
Operating Speed Mag 5 – 600 rpm
Mag 10 – 1000 rpm
Mag 15 – 1500 rpm
Weight 8 kg (without core bit)
Length 410 mm (without core bit)
Noise Level 83 dB Free running at 1m
Core bit connection ½” BSP Female
Options Water Flush Swivel
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Magnum Core Drill MODELS: 5, 10 & 15
96 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Diver operated twin brush cleaning tool
Unique design means it is equally efficient on both tubular and flat surfaces
A wide variety of brushes are available to cater for different types of marine growth
Can be configured for ROV application
TECHNICAL SPECIFICATION
Flow 40 l/min
Pressure 140 bar
Weight in Air 23 kg
Weight in Water 1 kg Buoyant
Depth Rating 70 m
Min. tube Dia. 450 mm
Dimensions 800 x 450 x 250 mm H
Max Brush Dia. 300 mm
Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings
Marine Cleaning Tool MODELS: MC212
UES Products 2017 / 97
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Ideal for installation on deck, on offshore vessels and platforms
Driven by an electro‐hydraulic power unit
Compact design, mounted on a dedicated subframe grillage
Designed and manufactured in accordance with Lloyd’s lifting appliances in a marine environment
TECHNICAL SPECIFICATION
Capacity 1.28Te at 14.5m
Hydraulic Reach 14.5m
Length Stowed 2.95m
Height Stowed 3.01m
Base Footprint 2.43m x 2.43m
Winch 2 Te
Max Reach 14.5m @ 1.25Te
Controls Local & Radio Remote
Hydraulic Power 37kW, 270 bar
Slewing Angle Continuous
Weight 6000kg
Certification Full certification package for MPI, slings, shackles, load and pull test
Melcal Marine Crane
MODEL: FL35T5
98 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Designed for the safe over‐boarding of cables, hoses & umbilical
TECHNICAL SPECIFICATION
Radius 700mm
Load Capacity 3000kg
Length 1310mm
Width 405 B/Flanges
Weight 600kg
Mounting Weld Plates
Certification Full certification package provided
Roller Chute
MODEL: RC700
UES Products 2017 / 99
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Designed for the safe overboarding of cables, hoses and umbilical
TECHNICAL SPECIFICATION
Line Pull 2000 kg
Bend Radius 800 mm
Max Diameter 80 mm
Sheave Length 1567 mm
Sheave Height 828 mm
Sheave Thickness 218 mm
Roller Sheave
MODEL: RDS 808‐2
100 / UES Products 2017
GENERAL DESCRIPTION
• Dirty work pack base unit housing a Dynaset 520
• Entirely flexible configuration, options include :
5 station 485 solenoid valve pack
3 Station pilot operated valve pack
Internal or external comps
TECHNICAL SPECIFICATION
Hydraulic Supply 30 l/min at 520 bar max
Accumulator Capacity P.O.A.
Output Pressure 520 bar max
Max output flow 30 l/pm
Frame All stainless assembly
Dimensions 804 x 600 x 200
Weight 26 kg , buoyancy available
Certification Full certification package for hose test, MPI, slings, shackles and load test
Dirty Work Pack
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES
+44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net
Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
UES Products 2017 / 101
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for handling ropes and cables for many applications
Max cable diameter 30mm
Complete with integrated Hydraulic Power Unit
TECHNICAL SPECIFICATION
Drum Dimensions 508mm Dia. Core 760mm Dia. Flange 1036mm Width
HPU 55kW Electric; 380/415/440v ph3 50/60Hz 4 pole, WDF250MH Vickers Hydraulic Pump, PVH98QIC‐RSF‐IS‐10‐C25V‐31 Reservoir capacity – 360 litres Working Pressure 250 bar. Flow setting – 120 l/min (Max. Flow 135 l/min)
Max Line Pull 3000kg Bare Drum
Winch Drive Motor Volvo, F12‐030‐MF‐CHC Motor displacement – 30cc/rev
Brake/Gearbox Brevini CTD3150
Control Danfoss PVG120 (Optional remote control)
Spooling Adjustment 9.4mm‐25mm Diameter, plc control
Frame Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4
Dimensions 2000 x 1600 x 1550 mm H
Weight 3000kg Tare, 5000kg Gross
Certification Full certification package for hose test, MPI, slings, shackles and load test
Hydraulic Winches
MODEL: SONAR WINCH
102 / UES Products 2017
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
3” NB suction dredge utilizing the lightweight efficient TP03 Trash Pump as its motive power
Capable of moving large volumes of liquid with concentrations of solids up to 25% running from a typical ROV
hydraulic supply
Optional jetting lance can be used in difficult soil conditions to fluidise the material and make it easier to dredge
Can be adapted for diver operation
TECHNICAL SPECIFICATION
Pump Flow 1688 LPM water Up to 3” solids
Pump Connections 4” Camlok Discharge, 3” Camlok Suction c/w Heliflex Hoses & ROV Suction Head
Hydraulic Connections 8JIC Supply & Return 4JIC Pilot
Inlet Flow 27 l/min
Inlet Pressure 210 bar Max
Dimensions 450 x 450 x 320 mm H
Weight 30kg (in Air)
Tools supplied as standard with 3m Suction and Discharge hoses and 3m whips w/ JIC connections
ROV TP03 Trash Pump
MODELS: TP03
UES Products 2017 / 103
ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 equipment@atrgroup.co.uk lifting@atrgroup.co.uk marine@atrgroup.co.uk power@atrgroup.co.uk sales@uesltd.net Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net
GENERAL DESCRIPTION
Suitable for pulling loads of up to 15Te
Wire capacity of 250m
Powered from an independent Hydrualic Power Unit
TECHNICAL SPECIFICATION
Manufacturer Zollern
Model ZHP 4.29
Max Line Pull 15Te on layer 6
Line speed: 0‐14 m/min
Drum Dimensions 672mm Core Dia. 1120mm Flange Dia. 530mm Drum Width
Wire Capacity 250m x 32mm
Hydraulic Supply 150 l/min @ 250 bar Max
Control Local directional & tension control
Brakes Dual Failsafe Mult‐disc Brake
Hydraulic Motors 2 off SAI GM1‐250 Radial Piston
Dimensions 1426 x 1230 x 1165mm H
Weight 3500kg Tare, 4500kg Gross
Hydraulic Winches
MODEL: 15Te Zollern Winch
PRODUCT INDEXEngineered SolutionsFlex Joint Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 //ROV Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 //Sea Chest Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 //
Standard ROV Tooling5K Water Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 //17 H/D Hot Stabs & Receptacles . . . . . . . . . . . . . . . . . . . . 21 //30 inch Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 //AX/VX Gasket Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . 24 //Brushing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 //Docking Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 //Dual Fluid HPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 //Dynaset Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 //ECB Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 //Flying Lead Orientation Tool . . . . . . . . . . . . . . . . . . . . . . . . . 16 //GL4 Regan Latch Release Tool . . . . . . . . . . . . . . . . . . . . . . . 34 //Hub Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 //Intelligent Valve Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 //Intervention Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 //Linear Valve Override Tool . . . . . . . . . . . . . . . . . . . . . . . . . . 33 //Mag Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 //Multipurpose Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 //Paddle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 //PH Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 //Subsea Load Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 //Subsea Sample Bottle Assembly . . . . . . . . . . . . . . . . . . . . . 41 //Subsea Torque Verification Unit . . . . . . . . . . . . . . . . . . . . . 17 //Suction Cup Sticky Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 //Suction Pile Interface Stab . . . . . . . . . . . . . . . . . . . . . . . . . . 38 //Super Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 //Torque Receptacle API 17D . . . . . . . . . . . . . . . . . . . . . . . . . . 32 //Torque Tool Adapter 17H Class 6/7 . . . . . . . . . . . . . . . . . . 20 //Vortex Dredge Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 //
Torque ToolsElectric Smart Torque Tool API 17H Class 1-4 . . . . . . . . 13 //Hi-Torque Tool API 17H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 //Smart Torque API 17h Class 1-4 . . . . . . . . . . . . . . . . . . . . . 14 //Torque Tool API 17H Class V . . . . . . . . . . . . . . . . . . . . . . . . . 19 //
UES Products12Te Tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 //3.5Te Demag Peel Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 //5Te Peel Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 //10Te Vantec Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 //Accumulator ER System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 //ATEX Zone 1 Hydraulic Power Pack . . . . . . . . . . . . . . . . . . 52 //Dirty Work Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 // Diver Torque Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 //Drum Spooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 // Electric Powered Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 //HPU & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 // Husqvarna Cut Off Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 // Hydraulic A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 //Hydraulic Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 // Hydraulic Cut-Off Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 // Hydraulic Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 //Hydraulic Hole Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 //Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 //Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 //Hydraulic Peanut Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 //Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 //Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 //Hydraulic Recip Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 //Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 // Hydraulic Shear Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 //Hydraulic Shear Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 //Hydraulic Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 // Hydraulic Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 // Intensifier Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 // Large Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 // Magnum Core Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 // Marine Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 // Melcal Marine Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 //
Roller Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 // Roller Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 // ROV Chain Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 //ROV Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 //ROV TP03 Trash Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 // Softline Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 //Softline Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 //Spitznaz Angle Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 //Stanley Chipping Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 //Stanley Hydraulic Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 //Subsea Drill Rig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 //Subsea Torque Verificaation Unit . . . . . . . . . . . . . . . . . . . . 75 //Turns Count & Torque Reader . . . . . . . . . . . . . . . . . . . . . . . . 77 //Twin Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 //
www.seanicusa.comA Centurion Group company
www.conserveplc.com
www.jackswinches.com
www.atrgroup.co.uk
www.rentairoffshore.com www.seanicusa.com
www.tristarwater.com.au
www.sthyd.com
www.miningcamps.com.au
www.atrgroup.co.uk/services/underwater-engineering-
services/
Centurion Group Limited provides equipment rental and specialist services on a global scale. We provide our customers with superior value by virtue of our experienced people and our unique ability to provide one rental solution via our portfolio companies. We combine the scale, breadth and capability of our collective rental solutions to drive efficiencies for our customers globally.
THE CENTURION GROUP PORTFOLIO OF COMPANIES
SEANICOCEAN SYSTEMS
Seanic Headquarters25310 Clay RoadKaty, TX 77493United States713-934-3100info@seanicusa.com
Seanic UES UK OfficeWest Pitmillan Business CentreNewburgh, Ellon AB41 6ALUnited Kingdon+44 1358 788202info@seanicusa.com
Seanic Singapore Office8 Taus View SquareSingapore, 637574+65 6863 4470info@seanicusa.com
www.seanicusa.comA Centurion Group company
Recommended