View
219
Download
0
Category
Preview:
Citation preview
VOLVO S80
Owner's manual Web Edition
Welcome to the world-wide family of Volvo owners. We trustthat you will enjoy many years of safe driving in your Volvo, anautomobile designed with your safety and comfort in mind. Weencourage you to familiarize yourself with the equipmentdescriptions and operating instructions in this manual. We alsourge you and your passengers to wear seat belts at all times inthis (or any other) vehicle. And, of course, please do not operatea vehicle if you may be affected by alcohol, medication or anyimpairment that could hinder your ability to drive.
Your Volvo is designed to meet all applicable safety and emis-sion standards. For further information please contact yourretailer, or:
In the USA: Volvo Cars of North America, LLC Customer CareCenter
P.O. Box 914
Rockleigh, New Jersey 07647-0914
1-800-458-1552
www.volvocars.us
In Canada: Volvo Cars of Canada Corp
National Customer Service
175 Gordon Baker Road
North York, Ontario M2H 2N7
1-800-663-8255
www.volvocanada.com
2008 © Volvo Car Corporation, All rights reserved.
Contents
4
0000 IntroductionImportant information................................. 8Important warnings..................................... 9Environment.............................................. 10
0101 SafetyOccupant safety........................................ 14Reporting safety defects........................... 15Seat belts ................................................. 16Supplemental Restraint System (SRS) .. . . 18Occupant Weight Sensor ......................... 23Side impact protection (SIPS) airbags ..... 27Volvo Inflatable Curtain (VIC) ................... 29Whiplash Protection System – WHIPS..... 30Crash mode.............................................. 32Child safety............................................... 33Child restraint systems............................. 35Infant seats............................................... 37Convertible seats...................................... 39Booster cushions...................................... 41ISOFIX lower anchors............................... 42Top tether anchors.................................... 43Child restraint registration and recalls...... 44Integrated booster cushion....................... 45Child safety locks...................................... 47
0202 Locks and alarmRemote key and key blade....................... 50Valet locking ............................................. 57Keyless drive............................................. 58Locks........................................................ 61Alarm......................................................... 64
Contents
5
0303 Your driving environmentInstruments and controls.......................... 70Ignition modes.......................................... 78Seats......................................................... 80Seats S80 Executive ............................... 85Steering wheel.......................................... 87Lighting..................................................... 88Wipers and washers................................. 94Power windows......................................... 96Mirrors....................................................... 98Power moonroof..................................... 100HomeLink® Wireless Control System(option).................................................... 102Starting the engine.................................. 105Transmission........................................... 109Brakes..................................................... 112Parking brake.......................................... 114
0404 Comfort and driving pleasureMenus and messages............................. 120Climate system....................................... 124Audio system.......................................... 131Bluetooth hands-free connection......... 142Rear Seat Entertainment - Dual Screen(RSE)–option .......................................... 148Trip computer......................................... 151Compass................................................. 152Stability system....................................... 154Active chassis system–Four C................ 156Cruise control.......................................... 157Collision warning with Auto-brake(option).................................................... 159Adaptive Cruise Control–ACC (option). . . 165Distance alert ......................................... 172Driver Alert System (option) ................... 175Park assist (option)................................. 180Blind Spot Information System (option). . 183Passenger compartment convenience.. . 187Passenger compartment convenience–S80 Executive ........................................ 190
0505 During your tripDriving recommendations....................... 194Refueling................................................. 198Loading................................................... 202Towing a trailer....................................... 205Emergency towing.................................. 207
Contents
6
0606 Maintenance and
specificationsVolvo maintenance.................................. 212Maintaining your car............................... 213Hood and engine compartment.............. 215Engine oil................................................ 216Fluids....................................................... 218Replacing bulbs...................................... 220Wiper blades and washer fluid................ 228Battery..................................................... 230Fuses....................................................... 233Wheels and tires..................................... 242Vehicle care............................................. 264Label information.................................... 269Specifications......................................... 271Volvo programs....................................... 278 07
07 IndexIndex....................................................... 279
Contents
7
Introduction
Important information
8
About this manual• Before you operate your vehicle for the first
time, please familiarize yourself with theinformation in chapter 3.
• Information contained in the balance of themanual is extremely useful and should beread after operating the vehicle for the firsttime.
• The manual is structured so that it can beused for reference. For this reason, itshould be kept in the vehicle for readyaccess.
NOTE
• Optional or accessory equipmentdescribed in this manual may not beavailable in all countries or markets.Please note that some vehicles may beequipped differently, depending onspecial legal requirements.
• All information, illustrations and specifi-cations contained in this manual arebased on the latest product informationavailable at the time of publication.
• Volvo reserves the right to make modelchanges at any time, or to change spec-ifications or design without notice andwithout incurring obligation.
• Do not export your Volvo to anothercountry before investigating that coun-try's applicable safety and emissioncontrol requirements. In some cases itmay be difficult or impossible to complywith these requirements. Modificationsto the emission control system(s) mayrender your Volvo not certifiable forlegal operation in the U.S., Canada andother countries.
WARNING
If your vehicle is involved in an accident,unseen damage may affect its drivabilityand safety.
Vehicle event data (Black box)Your vehicle's driving and safety systemsemploy computers that monitor, and sharewith each other, information about your vehi-cle's operation. One or more of these comput-ers may store what they monitor, either duringnormal vehicle operation or in a crash or near-crash event. Stored information may be readand used by:
• Volvo Car Corporation
• service and repair facilities
• law enforcement or government agencies
• others who may assert a legal right toknow, or who obtain your consent to knowsuch information.
Introduction
Important warnings
9
Driver distractionA driver has a responsibility to do everythingpossible to ensure his or her own safety andthe safety of passengers in the vehicle and oth-ers sharing the roadway. Avoiding distractionsis part of that responsibility.
Driver distraction results from driver activitiesthat are not directly related to controlling thevehicle in the driving environment. Your newVolvo is, or can be, equipped with many fea-ture-rich entertainment and communicationsystems. These include hands-free cellular tel-ephones, navigation systems, and multipur-pose audio systems. You may also own otherportable electronic devices for your own con-venience. When used properly and safely, theyenrich the driving experience. Improperly used,any of these could cause a distraction.
For all of these systems, we want to provide thefollowing warning that reflects the strong Volvoconcern for your safety.Never use these devi-ces or any feature of your vehicle in a way thatdistracts you from the task of driving safely.Distraction can lead to a serious accident. Inaddition to this general warning, we offer thefollowing guidance regarding specific newerfeatures that may be found in your vehicle
• Never use a hand-held cellular telephonewhile driving. Some jurisdictions prohibit
cellular telephone use by a driver while thevehicle is moving.
• If your vehicle is equipped with a naviga-tion system, set and make changes to yourtravel itinerary only with the vehicle parked.
• Never program your audio system whilethe vehicle is moving. Program radio pre-sets with the vehicle parked, and use yourprogrammed presets to make radio usequicker and simpler.
• Never use portable computers or personaldigital assistants while the vehicle is mov-ing.
Accessory installation• We strongly recommend that Volvo owners
install only genuine, Volvo-approvedaccessories, and that accessory installa-tions be performed only by a trained andqualified Volvo service technician.
• Genuine Volvo accessories are tested toensure compatibility with the performance,safety, and emission systems in your vehi-cle. Additionally, a trained and qualifiedVolvo service technician knows whereaccessories may and may not be safelyinstalled in your Volvo. In all cases, pleaseconsult a trained and qualified Volvo serv-ice technician before installing any acces-sory in or on your vehicle.
• Accessories that have not been approvedby Volvo may or may not be specificallytested for compatibility with your vehicle.Additionally, an inexperienced installermay not be familiar with some of your car'ssystems.
• Any of your car's performance and safetysystems could be adversely affected if youinstall accessories that Volvo has not tes-ted, or if you allow accessories to be instal-led by someone unfamiliar with your vehi-cle.
• Damage caused by unapproved orimproperly installed accessories may notbe covered by your new vehicle warranty.See your Warranty and Service RecordsInformation booklet for more warrantyinformation. Volvo assumes no responsi-bility for death, injury, or expenses thatmay result from the installation of non-gen-uine accessories.
Introduction
Environment
10
Volvo and the environmentVolvo is committed to the well being of its cus-tomers. As a natural part of this commitment,we care about the environment in which we alllive. Caring for the environment means aneveryday involvement in reducing our environ-mental impact. Volvo's environmental activitiesare based on a holistic view, which means weconsider the overall environmental impact of aproduct throughout its complete life cycle. Inthis context, design, production, product use,and recycling are all important considerations.In production, Volvo has partly or completelyphased out several chemicals including CFCs,lead chromates, asbestos, and cadmium; andreduced the number of chemicals used in ourplants 50% since 1991.
Volvo was the first in the world to introduce intoproduction a three-way catalytic converter witha Lambda sond, now called the heated oxygensensor, in 1976. The current version of thishighly efficient system reduces emissions ofharmful substances (CO, HC, NOx) from theexhaust pipe by approximately 95 – 99% andthe search to eliminate the remaining emis-sions continues. Volvo is the only automobilemanufacturer to offer CFC-free retrofit kits forthe air conditioning system of all models as farback as the 1975 model 240. Advanced elec-tronic engine controls and cleaner fuels arebringing us closer to our goal. After Volvo vehi-
cles and parts have fulfilled their use, recyclingis the next critical step in completing the lifecycle. The metal content is about 75% of thetotal weight of a vehicle, which makes the vehi-cle among the most recycled industrial prod-ucts. In order to have efficient and well-controlled recycling, dismantling information isavailable for all Volvo models. For Volvo, allhomogeneous plastic parts weighing morethan 3.4 oz. (100 grams) are marked with inter-national symbols that indicate how the com-ponent is to be sorted for recycling. In additionto continuous environmental refinement ofconventional gasoline-powered internal com-bustion engines, Volvo is actively looking atadvanced technology alternative-fuel vehicles.
When you drive a Volvo, you become our part-ner in the work to lessen the car's impact onthe environment. To reduce your vehicle'senvironmental impact, you can:
• Maintain proper air pressure in your tires.Tests have shown decreased fuel econ-omy with improperly inflated tires.
• Follow the recommended maintenanceschedule in your Warranty and ServiceRecords Information booklet.
• Drive at a constant speed whenever pos-sible.
• See a trained and qualified Volvo servicetechnician as soon as possible for inspec-tion if the check engine (malfunction indi-
cator) light illuminates, or stays on after thevehicle has started.
• Properly dispose of any vehicle-relatedwaste such as used motor oil, used batter-ies, brake pads, etc.
• When cleaning your vehicle, please usegenuine Volvo car care products. All Volvocar care products are formulated to beenvironmentally friendly.
WARNING
PROPOSITION 65 WARNING!
Engine exhaust, some of its constituents,and certain vehicle components contain oremit chemicals known to the state of Cali-fornia to cause cancer, and birth defects orother reproductive harm. In addition, certainfluids contained in vehicles and certainproducts of component wear contain oremit chemicals known to the State of Cali-fornia to cause cancer, and birth defects orother reproductive harm.
Introduction
Environment
11
WARNING
Certain components of this vehicle such asair bag modules, seat belt pretensioners,adaptive steering columns, and button cellbatteries may contain Perchlorate material.Special handling may apply for service orvehicle end of life disposal.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
G020871
12
Occupant safety...................................................................................... 14Reporting safety defects......................................................................... 15Seat belts ............................................................................................... 16Supplemental Restraint System (SRS) ................................................... 18Occupant Weight Sensor ....................................................................... 23Side impact protection (SIPS) airbags ................................................... 27Volvo Inflatable Curtain (VIC) ................................................................. 29Whiplash Protection System – WHIPS................................................... 30Crash mode............................................................................................. 32Child safety............................................................................................. 33Child restraint systems........................................................................... 35Infant seats.............................................................................................. 37Convertible seats.................................................................................... 39Booster cushions.................................................................................... 41ISOFIX lower anchors............................................................................. 42Top tether anchors.................................................................................. 43Child restraint registration and recalls.................................................... 44Integrated booster cushion..................................................................... 45Child safety locks.................................................................................... 47
01SAFETY
01 Safety
Occupant safety01
14
Volvo's concern for safetySafety is Volvo's cornerstone. Our concerndates back to 1927 when the first Volvo rolledoff the production line. Three-point seat belts(a Volvo invention), safety cages, and energy-absorbing impact zones were designed intoVolvo vehicles long before it was fashionableor required by government regulation.
We will not compromize our commitment tosafety. We continue to seek out new safetyfeatures and to refine those already in our vehi-cles. You can help. We would appreciate hear-ing your suggestions about improving automo-bile safety. We also want to know if you everhave a safety concern with your vehicle. Call usin the U.S. at: 1-800-458-1552 or in Canada at:1-800-663-8255.
Occupant safety remindersHow safely you drive doesn't depend on howold you are but rather on:
• How well you see.
• Your ability to concentrate.
• How quickly you make decisions understress to avoid an accident.
The following suggestions are intended to helpyou cope with the ever changing traffic envi-ronment.
• Never drink and drive.
• If you are taking any medication, consultyour physician about its potential effectson your driving abilities.
• Take a driver-retraining course.
• Have your eyes checked regularly.
• Keep your windshield and headlightsclean.
• Replace wiper blades when they start toleave streaks.
• Take into account the traffic, road, andweather conditions, particularly withregard to stopping distance.
01 Safety
Reporting safety defects 01
15
Reporting safety defects in the U.S.If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in addition tonotifying Volvo Cars of North Amer-ica, LLC. If NHTSA receives similarcomplaints, it may open an investiga-tion, and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your retailer, or VolvoCars of North America, LLC. To con-tact NHTSA, you may either call theAuto Safety Hotline toll-free at
1-888-327-4236
(TTY: 1-800-424-9153) or write to:NHTSA, U.S. Department of Trans-portation, Washington D.C. 20590.
You can also obtain other informationabout motor vehicle safety from:
http://www.safercar.gov
Volvo strongly recommends that ifyour vehicle is covered under a serv-ice campaign, safety or emissionrecall or similar action, it should becompleted as soon as possible.Please check with your local retaileror Volvo Cars of North America, LLCif your vehicle is covered under theseconditions.
NHTSA can be reached at:
Internet:
http://www.nhtsa.gov
Telephone:
1-888-DASH-2-DOT(1-888-327-4236).
Reporting safety defects in CanadaIf you believe your vehicle has a defect thatcould cause a crash or could cause injury ordeath, you should immediately inform Trans-port Canada in addition to notifying Volvo Carsof Canada Corp.
To contact Transport Canada, call(800) 333 – 0510, or (613) 993 – 9851 if you arecalling from the Ottawa region.
01 Safety
Seat belts 01
16
General information
G02
0995
Adjusting the seat belt
Seat belts should always be worn by all occu-pants of your vehicle. Children should be prop-erly restrained, using an infant, car, or boosterseat determined by age, weight and height.
Volvo also believes no child should sit in thefront seat of a vehicle.
Most states and provinces make it mandatoryfor occupants of a vehicle to use seat belts.
Seat belt pretensionersAll seat belts are equipped with pretensionersthat reduce slack in the belts. These preten-sioners are triggered in situations where thefront or side impact airbags deploy, and in cer-tain impacts from the rear. The front seat beltsalso include a tension reducing device which,
in the event of a collision, limits the peak forcesexerted by the seat belt on the occupant.
Buckling a seat beltPull the belt out far enough to insert the latchplate into the receptacle until a distinct click isheard. The seat belt retractor is normally"unlocked" and you can move freely, providedthat the shoulder belt is not pulled out too far.
The retractor will lock up as follows:
• if the belt is pulled out rapidly
• during braking and acceleration
• if the vehicle is leaning excessively
• when driving in turns.
To make child seat installation easier, eachseat belt (except for the driver's belt) is equip-ped with a locking mechanism to help keep theseat belt taut. See page 34 for more infor-mation regarding the Automatic LockingRetractor (ALR).
When wearing the seat belt remember:• The belt should not be twisted or turned.
• The lap section of the belt must be posi-tioned low on the hips (not pressing againstthe abdomen).
• Make sure that the shoulder belt is rolledup into its retractor and that the shoulderand lap belts are taut.
Seat belt reminderThe seat belt reminder consists of an audiblesignal and a symbol in the instrument panelthat alert the driver if his/her seat belt is notfastened.
Unbuckling the seat beltTo remove the seat belt, press the red sectionon the seat belt receptacle. Before exiting thevehicle, check that the seat belt retracts fullyafter being unbuckled. If necessary, guide thebelt back into the retractor slot.
Seat belt maintenanceCheck periodically that the seat belts are ingood condition. Use water and a mild deter-gent for cleaning. Check seat belt mechanismfunction as follows: attach the seat belt and pullrapidly on the strap.
WARNING
Never use a seat belt for more than oneoccupant. Never wear the shoulder portionof the belt under the arm, behind the backor otherwise out of position. Such use couldcause injury in the event of an accident. Asseat belts lose much of their strength whenexposed to violent stretching, they shouldbe replaced after any collision, even if theyappear to be undamaged.
01 Safety
Seat belts 01
17
WARNING
• Never repair the belt yourself; have thiswork done by a trained and qualifiedVolvo service technician only.
• Any device used to induce slack into theshoulder belt portion of the three-pointbelt system will have a detrimentaleffect on the amount of protection avail-able to you in the event of a collision.
• The seat back should not be tilted toofar back. The shoulder belt must be tautin order to function properly.
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat children who have outgrown thesedevices sit in the rear seat with the seatbelt properly fastened.
Seat belt use during pregnancy
G02
0998
The seat belt should always be worn duringpregnancy. But it is crucial that it be worn in thecorrect way. The diagonal section should wrapover the shoulder then be routed between thebreasts and to the side of the belly. The lapsection should lay flat over the thighs and aslow as possible under the belly. It must neverbe allowed to ride upward. Remove all slackfrom the belt and ensure that it fits close to thebody without any twists.
As a pregnancy progresses, pregnant driversshould adjust their seats and steering wheelsuch that they can easily maintain control of thevehicle as they drive (which means they mustbe able to easily operate the foot pedals andsteering wheel). Within this context, theyshould strive to position the seat with as large
a distance as possible between their belly andthe steering wheel.
Child seatsPlease refer to page 35 for information onsecuring child seats with the seat belts.
01 Safety
Supplemental Restraint System (SRS) 01
18
General information
G02
2831
Warning symbols in the instrument panel
As an enhancement to the three-point seatbelts, your Volvo is equipped with a Supple-mental Restraint System (SRS). Volvo's SRSconsists of seat belt pretensioners, front air-bags, side impact airbags, a front passengeroccupant weight sensor, and inflatable cur-tains. All of these systems are monitored by theSRS control module. An SRS warning light inthe instrument panel (see the illustration) illu-minates when the ignition is in modes I, II, orIII, and will normally go out after approximately6 seconds if no faults are detected in the sys-tem.
Where applicable, a text message will also bedisplayed when the SRS warning light illumi-nates. If this warning symbol is not functioning
properly, the general warning symbol illumi-nates and a text message will be displayed.See also page 72 and page 74 for moreinformation about indicator and warning sym-bols.
WARNING
• If the SRS warning light stays on afterthe engine has started or if it illuminateswhile you are driving, have the vehicleinspected by a trained and qualifiedVolvo service technician as soon aspossible.
• Never try to repair any component orpart of the SRS yourself. Any interfer-ence in the system could cause mal-function and serious injury. All work onthese systems should be performed bya trained and qualified Volvo servicetechnician.
WARNING
If your vehicle has been subjected to floodconditions (e.g. soaked carpeting/standingwater on the floor of the vehicle) or if yourvehicle has become flood-damaged in anyway, do not attempt to start the vehicle orinsert the remote control into the ignitionslot before disconnecting the battery (seebelow). This may cause airbag deploymentwhich could result in personal injury. Havethe vehicle towed to a trained and qualifiedVolvo service technician for repairs.
Automatic transmission:
Before attempting to tow the vehicle, usethe following procedure to override theshiftlock system to move the gear selectorto the neutral position:
1. Switch off the ignition for at least10 minutes and disconnect the battery
2. Wait at least one minute.
3. Insert the remote key into the ignitionslot and press the Start button (withoutdepressing brake pedal) to go to ignitionmode II. See page 78 for more infor-mation.
4. Press firmly on the brake pedal.
5. Move the gear selector from Park (P) tothe Neutral (N) position. see page 109for information on manually overridingthe shiftlock system.
01 Safety
Supplemental Restraint System (SRS) 01
19
Front airbags
G01
8665
The front airbag systemThe front airbags supplement the three-pointseat belts. For these airbags to provide theprotection intended, seat belts must be wornat all times.
The front airbag system includes gas genera-tors surrounded by the airbags, and decelera-tion sensors that activate the gas generators,causing the airbags to be inflated with nitrogengas.
G02
1013
Location of the passenger's side front airbag
As the movement of the seats' occupants com-presses the airbags, some of the gas is expel-led at a controlled rate to provide bettercushioning. Both seat belt pretensioners alsodeploy, minimizing seat belt slack. The entireprocess, including inflation and deflation of theairbags, takes approximately one fifth of a sec-ond.
The location of the front airbags is indicated bySRS AIRBAG embossed on the steering wheelpad and above the glove compartment, and bydecals on both sun visors and on the front andfar right side of the dash.
The driver's side front airbag is folded andlocated in the steering wheel hub.
The passenger's side front airbag is foldedbehind a panel located above the glove com-partment.
WARNING
• The airbags in the vehicle are designedto be a SUPPLEMENT to–not a replace-ment for–the three-point seat belts. Formaximum protection, wear seat belts atall times. Be aware that no system canprevent all possible injuries that mayoccur in an accident.
• Never drive a vehicle with a steeringwheel-mounted airbag with your handson the steering wheel pad/airbag hous-ing.
• The front airbags are designed to helpprevent serious injury. Deploymentoccurs very quickly and with consider-able force. During normal deploymentand depending on variables such asseating position, one may experienceabrasions, bruises, swellings, or otherinjuries as a result from deployment ofone or both of the airbags.
• When installing any accessory equip-ment, make sure that the front airbagsystem is not damaged. Any interfer-ence in the system could cause mal-function.
01 Safety
Supplemental Restraint System (SRS) 01
20
Front airbag deployment• The front airbags are designed to deploy
during certain frontal or front-angular col-lisions, impacts, or decelerations, depend-ing on the crash severity, angle, speed andobject impacted. The airbags may alsodeploy in certain non-frontal collisionswhere rapid deceleration occurs.
• The SRS sensors, which trigger the frontairbags, are designed to react to both theimpact of the collision and the inertialforces generated by it, and to determine ifthe intensity of the collision is sufficient forthe seat belt pretensioners and/or airbagsto be deployed.
However, not all frontal collisions activate thefront airbags.
• If the collision involves a nonrigid object(e.g., a snow drift or bush), or a rigid, fixedobject at a low speed, the front airbags willnot necessarily deploy.
• Front airbags do not normally deploy in aside impact collision, in a collision from therear or in a rollover situation.
• The amount of damage to the bodyworkdoes not reliably indicate if the airbagsshould have deployed or not.
WARNING
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat occupants under 4 feet 7 inches(140 cm) in height who have outgrownthese devices sit in the rear seat with theseat belt fastened1.
• Never drive with the airbags deployed.The fact that they hang out can impairthe steering of your vehicle. Othersafety systems can also be damaged.
• The smoke and dust formed when theairbags are deployed can cause skinand eye irritation in the event of pro-longed exposure.
Should you have questions about any compo-nent in the SRS system, please contact atrained and qualified Volvo service technicianor Volvo Customer Support:
In the USA
Volvo Cars of North America, LLC
Customer Care Center
P.O. Box 914 Rockleigh, New Jersey07647-0914
1-800-458-1552
www.volvocars.us
In Canada
Volvo Cars of Canada Corp.
National Customer Service
175 Gordon Baker Road
North York, Ontario M2H 2N7
1-800-663-8255
www.volvocanada.com
1 See also the Occupant Weight Sensor information see page 23.
01 Safety
Supplemental Restraint System (SRS) 01
21
NOTE
• Deployment of front airbags occurs onlyone time during an accident. In a colli-sion where deployment occurs, the air-bags and seat belt pretensioners acti-vate. Some noise occurs and a smallamount of powder is released. Therelease of the powder may appear assmoke-like matter. This is a normalcharacteristic and does not indicate fire.
• Volvo's front airbags use special sen-sors that are integrated with the frontseat buckles. The point at which the air-bag deploys is determined by whetheror not the seat belt is being used, as wellas the severity of the collision.
• Collisions can occur where only one ofthe airbags deploys. If the impact is lesssevere, but severe enough to present aclear injury risk, the airbags are trig-gered at partial capacity. If the impact ismore severe, the airbags are triggeredat full capacity.
Airbag decals
G03
2244
Airbag decal on the far right end of the passeng-er's dashboard
G00
8335
Airbag decal on the outside of both sun visors
G03
2527
Airbag decal on passenger's side dashboard
01 Safety
Supplemental Restraint System (SRS) 01
22
WARNING
• Children must never be allowed in thefront passenger's seat. Volvo recom-mends that ALL occupants (adults andchildren) shorter than 4 feet 7 inches(140 cm) be seated in the back seat ofany vehicle with a passenger-side frontairbag.
• Occupants in the front passenger's seatmust never sit on the edge of the seat,sit leaning toward the instrument panelor otherwise sit out of position.
• The occupant's back must be as uprightas comfort allows and be against theseat back with the seat belt properlyfastened.
• Feet must be on the floor, e.g., not onthe dash, seat or out of the window.
WARNING
• No objects or accessory equipment,e.g. dashboard covers, may be placedon, attached to, or installed near the airbag hatch (the area above the glovecompartment) or the area affected byairbag deployment (see the illustrationon page 19).
• There should be no loose articles, suchas coffee cups on the floor, seat, ordashboard area.
• Never try to open the airbag cover onthe steering wheel or the passenger'sside dashboard. This should only bedone by a trained and qualified Volvoservice technician.
• Failure to follow these instructions canresult in injury to the vehicle occupants.
01 Safety
Occupant Weight Sensor 01
23
General information
2
2
G01
7724
Occupant Weight Sensor (OWS) indicator light
Disabling the passenger's side frontairbagVolvo recommends that ALL occupants (adultsand children) shorter than 4 feet 7 inches(140 cm) be seated in the back seat of anyvehicle with a front passenger side airbag, andbe properly restrained for their size and weight.For child safety recommendations, seepage 34.
The Occupant Weight Sensor (OWS) isdesigned to meet the regulatory requirementsof Federal Motor Vehicle Safety Standard(FMVSS) 208 and is designed to disable (willnot inflate) the passenger's side front airbagunder certain conditions.
The OWS works with sensors that are part ofthe front passenger's seat and seat belt. Thesensors are designed to detect the presence ofa properly seated occupant and determine ifthe passenger's side front airbag should beenabled (may inflate) or disabled (will notinflate).
The OWS will disable (will not inflate) the pas-senger's side front airbag when:
• the front passenger's seat is unoccupied,or has small/medium objects in the frontseat,
• the system determines that an infant ispresent in a rear-facing infant seat that isinstalled according to the manufacturer'sinstructions,
• the system determines that a small child ispresent in a forward-facing child restraintthat is installed according to the manufac-turer's instructions,
• the system determines that a small child ispresent in a booster seat,
• a front passenger takes his/her weight offof the seat for a period of time,
• a child or a small person occupies the frontpassenger's seat.
The OWS uses a PASSENGER AIRBAG OFFindicator lamp which will illuminate and stay onto remind you that the passenger's side front
airbag is disabled. The PASSENGER AIRBAGOFF indicator lamp is located in the overheadconsole, near the base of the rearview mirror.
NOTE
When the ignition is switched on, the OWSindicator light will go on for up to 10 secondswhile the system performs a self-diagnostictest.
However, if a fault is detected in the system:
• The OWS indicator light will stay on
• The SRS warning light (see page 18) willcome on and stay on
• The message PASS. AIRBAG OFFSERVICE URGENT will be displayed inthe information display.
WARNING
If a fault in the system is detected and indi-cated as described, be aware that the pas-senger's side front airbag will not deploy inthe event of a collision. In this case, the SRSsystem and Occupant Weight Sensorshould be inspected by a trained and quali-fied Volvo service technician as soon aspossible.
01 Safety
Occupant Weight Sensor 01
24
WARNING
• Never try to open, remove, or repair anycomponents in the OWS system. Thiscould result in system malfunction.Maintenance or repairs should only becarried out by an a trained and qualifiedVolvo service technician.
• The front passenger's seat should notbe modified in any way. This couldreduce pressure on the seat cushion,which might interfere with the OWS sys-tem's function.
Passeng-er's seatoccu-pancy sta-tus
OWS indi-cator lightstatus
Passeng-er's sidefront air-bag status
Seat unoc-cupied
OWS indica-tor lightlights up.
Passenger'sside frontairbag disa-bled
Seat occu-pied by lowweightoccupant/objectA
OWS indica-tor lightlights up
Passenger'sside frontairbag disa-bled
Seat occu-pied byheavy occu-pant/object
OWS indica-tor light isnot lit
Passenger'sside frontairbag ena-bled
A Volvo recommends that children always be properlyrestrained in appropriate child restraints in the rear seats. Donot assume that the passenger's side front airbag is disabledunless the PASSENGER AIRBAG OFF indicator lamp is lit.Make sure the child restraint is properly installed. If there isany doubt as to the status of the passenger's side front air-bag, move the child restraint to the rear seat.
The OWS is designed to enable (may inflate)the passenger's side front airbag anytime thesystem senses that a person of adult size issitting properly in the front passenger's seat.
The PASSENGER AIRBAG OFF indicator lampwill be off and remain off.
If a person of adult size is sitting in the frontpassenger's seat, but the PASSENGER AIR-BAG OFF indicator lamp is on, it is possible thatthe person isn't sitting properly in the seat. Ifthis happens:
• Turn the vehicle off and ask the person toplace the seatback in an upright position.
• Have the person sit upright in the seat,centered on the seat cushion, with the per-son's legs comfortably extended.
• Restart the vehicle and have the personremain in this position for about twominutes. This will allow the system todetect that person and enable the pas-senger's frontal airbag.
• If the PASSENGER AIRBAG OFF indicatorlamp remains on even after this, the personshould be advised to ride in the rear seat.
This condition reflects limitations of the OWSclassification capability. It does not indicateOWS malfunction.
ModificationsIf you are considering modifying your vehicle inany way to accommodate a disability, forexample by altering or adapting the driver's orfront passenger's seat(s) and/or airbag sys-tems, please contact Volvo at:
01 Safety
Occupant Weight Sensor 01
25
In the USA
Volvo Cars of North America, LLC
Customer Care Center
P.O. Box 914 Rockleigh, New Jersey07647-0914
1-800-458-1552
In Canada
Volvo Cars of Canada Corp.
National Customer Service
175 Gordon Baker Road North York, OntarioM2H 2N7
1-800-663-8255
WARNING
• No objects that add to the total weighton the seat should be placed on thefront passenger's seat. If a child isseated in the front passenger's seatwith any additional weight, this extraweight could cause the OWS system toenable the airbag, which might cause itto deploy in the event of a collision,thereby injuring the child.
• The seat belt should never be wrappedaround an object on the front passeng-er's seat. This could interfere with theOWS system's function.
• The front passenger's seat belt shouldnever be used in a way that exerts morepressure on the passenger than normal.This could increase the pressure exer-ted on the weight sensor by a child, andcould result in the airbag being enabled,which might cause it to deploy in theevent of a collision, thereby injuring thechild.
WARNING
• Keep the following points in mind withrespect to the OWS system. Failure tofollow these instructions couldadversely affect the system's functionand result in serious injury to the occu-pant of the front passenger's seat:
• The full weight of the front seat passen-ger should always be on the seat cush-ion. The passenger should never lifthim/herself off the seat cushion usingthe armrest in the door or the centerconsole, by pressing the feet on thefloor, by sitting on the edge of the seatcushion, or by pressing against thebackrest in a way that reduces pressureon the seat cushion. This could causeOWS to disable the front, passenger'sside airbag.
01 Safety
Occupant Weight Sensor 01
26
WARNING
• Do not place any type of object on thefront passenger's seat in such a waythat jamming, pressing, or squeezingoccurs between the object and the frontseat, other than as a direct result of thecorrect use of the Automatic LockingRetractor/Emergency Locking Retrac-tor (ALR/ELR) seat belt (see page 34).
• No objects should be placed under thefront passenger's seat. This could inter-fere with the OWS system's function.
01 Safety
Side impact protection (SIPS) airbags 01
27
General information
G02
0694
Location of the side impact (SIPS) airbags (frontseats only)
As an enhancement to the structural sideimpact protection built into your vehicle, it isalso equipped with Side Impact ProtectionSystem (SIPS) airbags.
The SIPS airbag system is designed to helpincrease occupant protection in the event ofcertain side impact collisions. The SIPS air-bags are designed to deploy only during cer-tain side-impact collisions, depending on thecrash severity, angle, speed and point ofimpact.
G02
4377
SIPS airbag deployment
SIPS airbag deployment (one airbag) occursonly on the side of the vehicle affected by theimpact. The airbags are not designed to deployin all side impact situations.
G03
2254
SIPS decal on the front of the driver's door open-ing
NOTE
SIPS airbag deployment (one airbag) occursonly on the side of the vehicle affected bythe impact. The airbags are not designed todeploy in all side impact situations.
Components in the SIPS airbag systemThis SIPS airbag system consists of a gas gen-erator, the side airbag modules built into theoutboard sides of both front seat backrests,and electronic sensors/wiring.
01 Safety
Side impact protection (SIPS) airbags 01
28
WARNING
• The SIPS airbag system is a supple-ment to the structural Side Impact Pro-tection System and the three-point seatbelt system. It is not designed to deployduring collisions from the front or rear ofthe vehicle or in rollover situations.
• The use of seat covers on the front seatsmay impede SIPS airbag deployment.
• No objects, accessory equipment orstickers may be placed on, attached toor installed near the SIPS airbag systemor in the area affected by SIPS airbagdeployment.
• Never try to open or repair any compo-nents of the SIPS airbag system. Thisshould be done only by a trained andqualified Volvo service technician.
• In order for the SIPS airbag to provideits best protection, both front seatoccupants should sit in an upright posi-tion with the seat belt properly fastened.
• Failure to follow these instructions canresult in injury to the occupants of thevehicle in the event of an accident.
01 Safety
Volvo Inflatable Curtain (VIC) 01
29
General information
G02
0665
This system consists of inflatable curtainslocated along the sides of the roof liners,stretching from the center of both front sidewindows to the rear edge of the rear side doorwindows. It is designed to help protect theheads of the occupants of the front seats andthe occupant of the outboard rear seating posi-tions in certain side impact collisions.
In certain side impacts, both the Inflatable Cur-tain (VIC) and the Side Impact Airbag System(SIPS airbag) will deploy. The VIC and the SIPSairbag deploy simultaneously.
NOTE
If the inflatable curtain deploys, it remainsinflated for approximately 3 seconds.
WARNING
• The VIC system is a supplement to theSide Impact Protection System. It is notdesigned to deploy during collisionsfrom the front or rear of the vehicle or inrollover situations.
• Never try to open or repair any compo-nents of the VIC system. This should bedone only by a trained and qualifiedVolvo service technician.
• Never hang heavy items from the ceilinghandles. This could impede deploymentof the Inflatable Curtain.
• The rear seat should not be loaded to alevel higher than 2 in. (5 cm) below theupper edge of the rear side windows.Objects placed higher than this levelcould impede the function of the VolvoInflatable Curtain.
WARNING
In order for the VIC to provide its best pro-tection, both front seat occupants and bothoutboard rear seat occupants should sit inan upright position with the seat belt prop-erly fastened; adults using the seat belt andchildren using the proper child restraint sys-tem. Only adults should sit in the front seats.Children must never be allowed in the frontpassenger seat, see page 34 for guide-lines. Failure to follow these instructions canresult in injury to the vehicle occupants in anaccident.
01 Safety
Whiplash Protection System – WHIPS01
30
General information
G02
1018
Whiplash Protection System (WHIPS) –front seats onlyThe WHIPS system consists of speciallydesigned hinges and brackets on the front seatbackrests designed to help absorb some of theenergy generated in a collision from the rear(when the vehicle is rear-ended).
In the event of a collision of this type, the hingesand brackets of the front seat backrests aredesigned to change position slightly to allowthe backrest/head restraint to help support theoccupant's head before moving slightly rear-ward. This movement helps absorb some ofthe forces that could result in whiplash.
WARNING
• The WHIPS system is designed to sup-plement the other safety systems inyour vehicle. For this system to functionproperly, the three-point seat belt mustbe worn. Please be aware that no sys-tem can prevent all possible injuries thatmay occur in an accident.
• The WHIPS system is designed to func-tion in certain collisions from the rear,depending on the crash severity, angleand speed.
WARNING
• Occupants in the front seats must neversit out of position. The occupant's backmust be as upright as comfort allowsand be against the seat back with theseat belt properly fastened.
• If your vehicle has been involved in arear-end collision, the front seat backr-ests must be inspected by a trained andqualified Volvo service technician, evenif the seats appear to be undamaged.Certain components in the WHIPS sys-tem may need to be replaced.
• Do not attempt to service any compo-nent in the WHIPS system yourself.
G02
1842
01 Safety
Whiplash Protection System – WHIPS 01
31
WARNING
• Boxes, suitcases, etc. wedged behindthe front seats could impede the func-tion of the WHIPS system.
• If the rear seat backrests are foldeddown, cargo must be secured to pre-vent it from sliding forward against thefront seat backrests in the event of acollision from the rear. This could inter-fere with the action of the WHIPS sys-tem.
G01
8567
WARNING
Any contact between the front seat backr-ests and the folded rear seat or a rear-facingchild seat could impede the function of theWHIPS system. If the rear seat is foldeddown, the occupied front seats must beadjusted forward so that they do not touchthe folded rear seat.
01 Safety
Crash mode01
32
G02
2831
Driving after a collisionIf the vehicle has been involved in a collision,the text SAFETY MODE SEE MANUAL mayappear in the information display. This indi-cates that the vehicle's functionality has beenreduced.
NOTE
This text can only be shown if the display isundamaged and the vehicle's electrical sys-tem is intact.
Safety mode is a feature that is triggered if oneor more of the safety systems (e.g. front or sideairbags, an inflatable curtain, or one or more ofthe seat belt pretensioners) has deployed. Thecollision may have damaged an important
function in the vehicle, such as the fuel lines,sensors for one of the safety systems, thebrake system, etc.
WARNING
• Never attempt to repair the vehicleyourself or to reset the electrical systemafter the vehicle has displayed SAFETYMODE SEE MANUAL. This couldresult in injury or improper system func-tion.
• Restoring the vehicle to normal operat-ing status should only be done by atrained and qualified Volvo service tech-nician.
• After SAFETY MODE SEE MANUALhas been displayed, if you detect theodor of fuel vapor, or see any signs offuel leakage, do not attempt to start thevehicle. Leave the vehicle immediately.
Attempting to start the vehicleIf damage to the vehicle is minor and there isno fuel leakage, you may attempt to start thevehicle. To do so:
1. Remove the remote control from the igni-tion slot.
2. Reinsert the remote in the ignition slot. Thevehicle will then attempt to reset Safetymode to normal status.
3. Try to start the vehicle.
Moving the vehicleIf the electrical system is able to reset systemstatus to normal (SAFETY MODE SEEMANUAL will no longer be shown in the dis-play), the vehicle may be moved carefully fromits present position, if for example, it is blockingtraffic. It should, however, not be moved fartherthan is absolutely necessary.
WARNING
Even if the vehicle appears to be drivableafter Safety mode has been set, it shouldnot be driven or towed (pulled by anothervehicle). There may be concealed damagethat could make it difficult or impossible tocontrol. The vehicle should be transportedon a flatbed tow truck to a trained and quali-fied Volvo service technician for inspection/repairs.
01 Safety
Child safety 01
33
Children should be seated safelyVolvo recommends the proper use of restraintsystems for all occupants including children.Remember that, regardless of age and size, achild should always be properly restrained in avehicle.
Your vehicle is also equipped with ISOFIX/LATCH attachments, which make it more con-venient to install child seats.
Some restraint systems for children aredesigned to be secured in the vehicle by lapbelts or the lap portion of a lap-shoulder belt.Such child restraint systems can help protectchildren in vehicles in the event of an accidentonly if they are used properly. However, chil-dren could be endangered in a crash if the childrestraints are not properly secured in the vehi-cle. Failure to follow the installation instructionsfor your child restraint can result in your childstriking the vehicle's interior in a sudden stop.
Holding a child in your arms is NOT a suitablesubstitute for a child restraint system. In anaccident, a child held in a person's arms canbe crushed between the vehicle's interior andan unrestrained person. The child could also beinjured by striking the interior, or by being ejec-ted from the vehicle during a sudden maneuveror impact. The same can also happen if theinfant or child rides unrestrained on the seat.Other occupants should also be properly
restrained to help reduce the chance of injuringor increasing the injury of a child.
All states and provinces have legislation gov-erning how and where children should be car-ried in a vehicle. Find out the regulationsexisting in your state or province. Recent acci-dent statistics have shown that children aresafer in rear seating positions than front seatingpositions when properly restrained. A childrestraint system can help protect a child in avehicle. Here's what to look for when selectinga child restraint system:
It should have a label certifying that it meetsapplicable Federal Motor Vehicle SafetyStandards (FMVSS 213) – or in Canada,CMVSS 213.
Make sure the child restraint system isapproved for the child's height, weight anddevelopment – the label required by the stand-ard or regulation, or instructions for infantrestraints, typically provide this information.
In using any child restraint system, we urge youto carefully look over the instructions that areprovided with the restraint. Be sure you under-stand them and can use the device properlyand safely in this vehicle. A misused childrestraint system can result in increased injuriesfor both the infant or child and other occupantsin the vehicle.
When a child has outgrown the child safetyseat, you should use the rear seat with thestandard seat belt fastened. The best way tohelp protect the child here is to place the childon a cushion so that the seat belt is properlylocated on the hips (see the illustration on page41). Legislation in your state or province maymandate the use of a child seat or cushion incombination with the seat belt, depending onthe child's age and/or size. Please check localregulations.
A specially designed and tested booster cush-ion (not available in Canada) can be obtainedfrom your Volvo retailer for children weighing33 – 80 lb. (15 – 36 kg) and 38 – 54 inches(97 – 137 cm) in height.
01 Safety
Child safety01
34
WARNING
• Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommendthat children under 4 feet 7 inches(140 cm) in height who have outgrownthese devices sit in the rear seat with theseat belt fastened.
• Keep vehicle doors and trunk lockedand keep remote controls out of achild’s reach. Unsupervised childrencould lock themselves in an open trunkand risk injury. Children should betaught not to play in vehicles.
• On hot days, the temperature in thevehicle interior can rise very quickly.Exposure to these high temperaturesfor even a short period of time cancause heat-related injury or death.Small children are particularly at risk.
Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR)To make child seat installation easier, eachseat belt (except for the driver's belt) is equip-ped with a locking mechanism to help keep theseat belt taut.
When attaching the seat belt to a childseat:1. Attach the seat belt to the child seat
according to the child seat manufacturer'sinstructions.
2. Pull the seat belt out as far as possible.
3. Insert the seat belt latch plate into thebuckle (lock) in the usual way.
4. Release the seat belt and pull it taut aroundthe child seat.
A sound from the seat belt retractor will beaudible at this time and is normal. The belt willnow be locked in place. This function is auto-matically disabled when the seat belt isunlocked and the belt is fully retracted.
WARNING
Do not use child safety seats or childbooster cushions/backrests in the frontpassenger's seat. We also recommend thatchildren who have outgrown these devicessit in the rear seat with the seat belt properlyfastened.
Volvo's recommendationsWhy does Volvo believe that no child should sitin the front seat of a vehicle? It's quite simplereally. A front airbag is a very powerful devicedesigned, by law, to help protect an adult.
Because of the size of the airbag and its speedof inflation, a child should never be placed inthe front seat, even if he or she is properly bel-ted or strapped into a child safety seat. Volvohas been an innovator in safety for over sev-enty-five years, and we'll continue to do ourpart. But we need your help. Please rememberto put your children in the back seat, andbuckle them up.
Volvo has some very specificrecommendations:• Always wear your seat belt.
• Airbags are a SUPPLEMENTAL safetydevice which, when used with a three-point seat belt can help reduce seriousinjuries during certain types of accidents.Volvo recommends that you do not dis-connect the airbag system in your vehicle.
• Volvo strongly recommends that everyonein the vehicle be properly restrained.
• Volvo recommends that ALL occupants(adults and children) shorter than 4 feet7 inches (140 cm) be seated in the backseat of any vehicle with a front passengerside airbag.
Drive safely!
01 Safety
Child restraint systems 01
35
Child restraints
G02
2840
Infant seat
There are three main types of child restraintsystems: infant seats, convertible seats, andbooster cushions. They are classified accord-ing to the child's age and size.
The following section provides general infor-mation on securing a child restraint using athree-point seat belt. Refer to page 42–43for information on securing a child restraintusing ISOFIX lower anchors and/or top tetheranchorages.
G02
2847
Convertible seat
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated (on vehiclesequipped with Occupant Weight Sensor). Ifthe severity of an accident were to cause theairbag to inflate, this could lead to seriousinjury or death to a child seated in this posi-tion.
G02
3269
Booster cushion
WARNING
Always refer to the child restraint manufac-turer's instructions for detailed informationon securing the restraint.
01 Safety
Child restraint systems01
36
WARNING
• When not in use, keep the child restraintsystem secured or remove it from thepassenger compartment to help pre-vent it from injuring passengers in theevent of a sudden stop or collision.
• A small child's head represents a con-siderable part of its total weight and itsneck is still very weak. Volvo recom-mends that children up to age 4 travel,properly restrained, facing rearward. Inaddition, Volvo recommends that chil-dren should ride rearward facing, prop-erly restrained, as long as possible.
01 Safety
Infant seats 01
37
Securing an infant seat with a seat belt
G02
2844
Do not place the infant seat in the front passeng-er's sea
NOTE
Refer to page 42–43 for information onsecuring a child restraint using ISOFIX loweranchors and/or top tether anchorages.
1. Place the infant seat in the rear seat of thevehicle.
2. Attach the seat belt to the infant seataccording to the manufacturer's instruc-tions.
G02
3270
Positioning the seat belt through the infant seat
WARNING
• An infant seat must be in the rear-facingposition only.
• The infant seat should not be positionedbehind the driver's seat unless there isadequate space for safe installation.
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated (on vehiclesequipped with Occupant Weight Sensor). Ifthe severity of an accident were to cause theairbag to inflate, this could lead to seriousinjury or death to a child seated in this posi-tion.
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
G02
3271
Fasten the seat belt
01 Safety
Infant seats01
38
G02
2846
Pull out the shoulder section of the seat belt
4. Pull the shoulder section of the seat beltout as far as possible to activate the belt'sautomatic locking function.
NOTE
The locking retractor will automaticallyrelease when the seat belt is unbuckled andallowed to retract fully.
5. Press the infant seat firmly in place, let theseat belt retract and pull it taut. A soundfrom the seat belt retractor's automaticlocking function will be audible at this timeand is normal. The seat belt should now belocked in place.
G02
2850
Ensure that the seat is securely in place
6. Push and pull the infant seat to ensure thatit is held securely in place by the seat belt.
WARNING
It should not be possible to move the childrestraint more than 1 in. (2.5 cm) in anydirection.
The infant seat can be removed by unbucklingthe seat belt and letting it retract completely.
01 Safety
Convertible seats 01
39
Securing a convertible seat with a seatbelt
G01
8630
Do not place the convertible seat in the front pas-senger's seat
NOTE
Refer to pages 42 and 43s for informa-tion on securing a child restraint using ISO-FIX lower anchors and/or top tether ancho-rages.
Convertible seats can be used in either a for-ward or rearward-facing position, dependingon the age and size of the child.
G02
2847
Route the seat belt through the convertible seat
WARNING
Always use a convertible seat that is suita-ble for the child's age and size. See theconvertible seat manufacturer's recommen-dations.
1. Place the convertible seat in the rear seatof the vehicle.
WARNING
• A small child's head represents a con-siderable part of its total weight and itsneck is still very weak. Volvo recom-mends that children up to age 4 travel,properly restrained, facing rearward. Inaddition, Volvo recommends that chil-dren should ride rearward facing, prop-erly restrained, as long as possible.
• Convertible child seats should be instal-led in the rear seat only.
• A rear-facing convertible seat should notbe positioned behind the driver's seatunless there is adequate space for safeinstallation.
2. Attach the seat belt to the convertible seataccording to the manufacturer's instruc-tions.
01 Safety
Convertible seats01
40
G02
2848
Fasten the seat belt
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
4. Pull the shoulder section of the seat beltout as far as possible to activate the belt'sautomatic locking function.
NOTE
The locking retractor will automaticallyrelease when the seat belt is unbuckled andallowed to retract fully.
5. Press the convertible seat firmly in place,let the seat belt retract and pull it taut. Asound from the seat belt retractor's auto-matic locking function will be audible at this
time and is normal. The seat belt shouldnow be locked in place.
G02
2849
Pull out the shoulder section of the seat belt
6. Push and pull the convertible seat toensure that it is held securely in place bythe seat belt.
WARNING
It should not be possible to move the childrestraint more than 1 in. (2.5 cm) in anydirection.
The convertible seat can be removed byunbuckling the seat belt and letting it retractcompletely.
G02
2850
Ensure that the seat is securely in place
WARNING
A child seat should never be used in thefront passenger seat of any vehicle with afront passenger airbag – not even if the"Passenger airbag off" symbol near therear-view mirror is illuminated (on vehiclesequipped with Occupant Weight Sensor). Ifthe severity of an accident were to cause theairbag to inflate, this could lead to seriousinjury or death to a child seated in this posi-tion.
01 Safety
Booster cushions 01
41
Securing a booster cushion
G02
2851
Position the child correctly on the booster cushion
Booster cushions are recommended for chil-dren who have outgrown convertible seats.
1. Place the booster cushion in the rear seatof the vehicle.
2. With the child properly seated on thebooster cushion, attach the seat belt to oraround the cushion according to the man-ufacturer's instructions.
3. Fasten the seat belt by inserting the latchplate into the buckle (lock) until a distinctclick is audible.
G02
2852
Positioning the seat belt
4. Ensure that the seat belt is pulled taut andfits snugly around the child.
WARNING
• The hip section of the three-point seatbelt must fit snugly across the child'ships, not across the stomach.
• The shoulder section of the three-pointseat belt should be positioned acrossthe chest and shoulder.
• The shoulder belt must never be placedbehind the child's back or under thearm.
01 Safety
ISOFIX lower anchors01
42
Using the ISOFIX lower child seatanchors
G02
1064
ISOFIX lower child restraint anchors
Lower anchors for ISOFIX-equipped childseats are located in the rear, outboard seats,hidden below the backrest cushions. Symbolson the seat back upholstery mark the anchorpositions as shown. To access the anchors,kneel on the seat cushion and locate theanchors by feel. Always follow your child seatmanufacturer's installation instructions, anduse both ISOFIX lower anchors and top tetherswhenever possible.
To access the anchors1. Put the child restraint in position.
2. Kneel on the child restraint to press downthe seat cushion and locate the anchors byfeel.
3. Fasten the attachment on the childrestraint's lower straps to the ISOFIX loweranchors.
4. Firmly tension the lower child seat strapsaccording to the manufacturer's instruc-tions.
NOTE
• The rear seat's center position is notequipped with ISOFIX lower anchors.When installing a child restraint in thisposition, attach the restraint's top tetherstrap (if it is so equipped) to the toptether anchorage point and secure therestraint with the vehicle's center seatbelt.
• Always follow your child seat manufac-turer's installation instructions, and useboth ISOFIX lower anchors and toptethers whenever possible.
G01
8631
Fasten the attachment correctly to the ISOFIXlower anchors
WARNING
• Be sure to fasten the attachment cor-rectly to the anchor (see the illustration).If the attachment is not correctly fas-tened, the child restraint may not beproperly secured in the event of a colli-sion.
• The ISOFIX lower child restraintanchors are only intended for use withchild seats positioned in the outboardseating positions. These anchors arenot certified for use with any childrestraint that is positioned in the centerseating position. When securing a childrestraint in the center seating position,use only the vehicle's center seat belt.
01 Safety
Top tether anchors 01
43
Child restraint anchorages
G02
1068
Your Volvo is equipped with child restraint toptether anchorages in the rear seat. They arelocated on the rear parcel shelf.
Securing a child seat
1. Place the child restraint on the rear seat.
2. Fold up the plastic cover over the anchor-age to be used.
3. Route the top tether strap under the headrestraint and attach it to the anchor.
4. Attach lower tether straps to the lower ISO-FIX/LATCH anchors. If the child restraint isnot equipped with lower tether straps, orthe restraint is used in the center seatingposition, follow instructions for securing a
child restraint using the Automatic LockingRetractor seat belt (see page 34).
5. Firmly tension all straps.
Refer also to the child seat manufacturer'sinstructions for information on securing thechild seat.
WARNING
• Never route a top tether strap over thetop of the head restraint. The strapshould be routed beneath the headrestraint.
• Child restraint anchorages are designedto withstand only those loads imposedby correctly fitted child restraints. Underno circumstances are they to be usedfor adult seat belts or harnesses. Theanchorages are not able to withstandexcessive forces on them in the event ofcollision if full harness seat belts or adultseat belts are installed to them. An adultwho uses a belt anchored in a childrestraint anchorage runs a great risk ofsuffering severe injuries should a colli-sion occur.
• Do not install rear speakers that requirethe removal of the top tether anchors orinterfere with the proper use of the toptether strap.
01 Safety
Child restraint registration and recalls01
44
Registering a child restraintChild restraints could be recalled for safetyreasons. You must register your child restraintto be reached in a recall. To stay informedabout child safety seat recalls, be sure to fill outand return the registration card that comeswith new child restraints.
Child restraint recall information is readily avail-able in both the U.S. and Canada. For recallinformation in the U.S., call the U.S. Govern-ment's Auto Safety Hotline at 1-800-424-9393.In Canada, visit Transport Canada's ChildSafety website at http://www.tc.gc.ca/roadsafety/childsafety/menu.htm.
01 Safety
Integrated booster cushion 01
45
Integrated booster cushion (option)1
G02
1069
Volvo's optional integrated booster cushion islocated in the center seating position. Thisbooster cushion has been specially designedto help safeguard a child in the rear seat. Itshould be stowed (folded up into the rear seatbackrest) when not in use. When using an inte-grated booster cushion, the child must besecured with the vehicle's three-point seatbelt.
Use this booster cushion only withchildren who weigh between 33 and80 lbs (15 and 36 kg) and whoseheight is between 38 and 54 in (97and 137 cm). In Canada, Transport
Canada's weight recommendation is40-80 lbs (18-36 kg).The booster cushion is designed to raise thechild higher, so that the shoulder strap crossesover the child's collarbone, not over the child'sneck. If using a booster cushion does not resultin proper positioning of the shoulder strap,then the child should be placed in a properlysecured child restraint (see page 35). Theshoulder belt must never be placed behind thechild's back or under the arm.
Using the integrated booster cushion
G02
1070
G02
1071
G02
1072
Fold down the booster cushion from therear seat backrest.
Loosen the Velcro strip.
Fold up the backrest section of the boostercushion into the upright position.
Before driving, check that:
1 Canada only: This cushion may be referred to as a built-in booster cushion.
01 Safety
Integrated booster cushion01
46
• The seat belt is properly positioned and istaut.
• The shoulder section of the seat belt isacross the child's collarbone, not over theneck.
• The lap section of the seat belt is acrossthe child's hips and not the abdomen.
Stowing the integrated booster cushion
G02
1074
G02
1075
G02
1076
Fold down the backrest section of thebooster cushion.
Fasten the Velcro strip.
Fold up the booster cushion into the rearseat backrest.
NOTE
See also the instructions on the integratedbooster cushion.
WARNING
DEATH or SERIOUS INJURY canoccurFollow all instructions on thebooster cushion and in the vehi-cle's owner's manual.MAKE SURE THE BOOSTERCUSHION IS SECURELYLOCKED BEFORE THE CHILD ISSEATED.• Use this booster cushion only with chil-
dren who weigh between 33 and 80 lbs(15 and 36 kg) and whose height isbetween 38 and 54 in (97 and 137 cm).In Canada, Transport Canada's weightrecommendation is 40-80 lbs (18-36kg).
• In the event of a collision while the inte-grated booster cushion was occupied,the entire booster cushion and seat beltmust be replaced. The booster cushionshould also be replaced if it is badlyworn or damaged in any way. This workshould be performed by a trained andqualified Volvo service technician only.
01 Safety
Child safety locks 01
47
Child safety locks
G02
1077
Manual child safety locks – rear doorsThe controls are located on the rear doorjambs. Use the remote control's key blade or ascrewdriver to adjust these controls.
The rear doors can only be opened fromthe outside when the slot is in the horizon-tal position.
The rear doors can be opened from theinside when the slot is in the vertical posi-tion.
G01
9300
Power child safety locks (option oncertain markets)The power child lock function can be activatedby pressing the button shown in the inset illus-tration above. The ignition must be in mode Ior II (see page 78).
When the function is activated, a message willappear in the information display and the indi-cator light in the button will light up.
With the function activated:
• The rear door windows can only be openedwith the control in the driver's door.
• The rear doors cannot be opened from theinside.
NOTE
There are no manual child safety locks onvehicles equipped with the optional powerchild safety locks.
WARNING
Remember, in the event of an accident, therear seat passengers cannot open the doorsfrom the inside with the controls in positionA (manual child safety locks) or if the powerchild safety lock function is activated.
48
Remote key and key blade..................................................................... 50Valet locking ........................................................................................... 57Keyless drive........................................................................................... 58Locks....................................................................................................... 61Alarm....................................................................................................... 64
02LOCKS AND ALARM
02 Locks and alarm
Remote key and key blade
02
50
IntroductionTwo remote keys or optional Personal CarCommunicators (PCC) are provided with yourvehicle. They enable you to unlock the doorsand trunk, and also function as ignition keys tostart the vehicle or operate electrical compo-nents. The remote keys contain detachablemetal key blades for manually locking orunlocking the driver's door and the glove com-partment. Up to six remotes can be pro-grammed for use on the same vehicle.
The PCCs have enhanced functionality com-pared with the standard remote control.
NOTE
In the remainder of this chapter, all referen-ces to the remote key also pertain to thePCC unless otherwise stated.
WARNING
Never leave the remote key in the ignition ifchildren are to remain in the vehicle.
Detachable key bladeEach remote key or PCC contains a detachablemetal key blade for mechanically locking orunlocking the driver's door and the glove com-partment, and to enable the valet locking func-tion. See page 55 for more information on thekey blade and page see page 57 for informa-
tion on the valet locking function. The keyblades have a unique code, which is used ifnew ones need to be produced. This code isavailable at an authorized Volvo retailer.
Loss of a remote keyIf a remote key is lost, the other one must betaken with the vehicle to a trained and qualifiedVolvo service technician. As an anti-theftmeasure, the code of the lost remote must beerased from the system.
The number of registered keys for the vehiclecan be found in the vehicle's menu under Carsettings Car key memory Number ofkeys. See page 120 for a description of themenu system.
USA-5WK49264
FCC ID:KR55WK49264 + Siemens VDO5WK49236
FCC ID:KR55WK49236, 5WK49266
FCC ID:KR55WK49266 + Siemens VDO5WK49233
FCC ID:KR55WK49233
This device complies with part 15 of the FCCrules and RSS-210. Operation is subject to thefollowing conditions: (1) This device may notcause harmful interference, and (2) this devicemust accept any interference received, includ-
ing interference that may cause undesiredoperation.
Canada-5WK49264
IC:267T-5WK49264 + Siemens VDO5WK49236
IC:267T-5WK49236, 5WK49266
IC:267T-5WK49266 + Siemens VDO5WK49233
IC:267T-5WK49233
Operation is subject to the following condi-tions: (1) this device may not cause interfer-ence, and (2) this device must accept anyinterference, including interference that maycause undesired operation of the device.
Key memory – door mirrors and driver'sseatThe position of the side door mirrors andoptional power driver's seat are stored in theremote keys when the vehicle is locked. Thenext time the driver's door is unlocked with thesame remote key and the door is opened within2 minutes, the power driver's seat and sidedoor mirrors will automatically move to theposition that they were in when the doors weremost recently locked with the same remotekey. See page 81 for more information.
02 Locks and alarm
Remote key and key blade
02
51
This feature can be activated or deactivated inthe vehicle's menu under Car settings Carkey memory Seat & mirror positions. Seepage 120 for a description of the menu sys-tem.
See also page 58 for information regardingvehicles with the optional keyless drive.
Confirmation when locking/unlockingthe vehicleWhen the vehicle is locked with a remote key,the turn signals will flash once to confirm thatthis has been completed correctly.
When the vehicle is locked, confirmation willonly be given if all of the locks are locked afterthe doors have been closed.
NOTE
If you do not receive confirmation whenlocking the vehicle, check whether a door orthe trunk is ajar, or if this feature has beenturned off in the menu.
This function can be activated or deactivatedunder Car settings Light settings Lockconfirmation, light, or Car settings Lightsettings Unlock confirmation, light. Seepage 120 for a description of the menu sys-tem.
Immobilizer (start inhibitor)Each of the keys supplied with your vehiclecontains a coded transponder. The code in thekey is transmitted to an antenna in the ignitionslot where it is compared to the code stored inthe start inhibitor module. The vehicle will startonly with a properly coded key. If you misplacea key, take the other keys to a trained andqualified Volvo service technician for reprog-ramming as an antitheft measure. The follow-ing messages (which may appear in theinstrument panel display) are related to theimmobilizer:
Message Meaning
Key error Reinsertkey
Remote key not rec-ognized during start.Try to start the vehi-cle again.
Car key Not found PCC with keylessdrive only. Remotekey not recognizedduring start. Try tostart the vehicleagain.
Immobilizer Seemanual
Remote key faultduring start. Contactan authorized Volvoworkshop.
CAUTION
Never use force when inserting the remotekey in the ignition slot. The vehicle cannotbe started if the transponder is damaged.
USA–FCC ID: LTQWFS 125VO
This device complies with part 15 of the FCCrules. Operation is subject to the following con-dition: (1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, including interfer-ence that may cause undesired operation.
02 Locks and alarm
Remote key and key blade
02
52
Canada–IC: 3659A-WFS125VO
Operation is subject to the following condi-tions: (1) this device may not cause interfer-ence, and (2) this device must accept anyinterference, including interference that maycause undesired operation of the device.
See page 105 for information on starting thevehicle.
Replacing the battery in the remote keyThe batteries should be replaced if:
• The information symbol illuminates andReplace car key battery is shown in thedisplay and/or
• if the locks do not react after severalattempts to unlock or lock the vehicle.
NOTE
The remote key's range is normally approx-imately 60 ft (20 m) from the vehicle.
See page 55 for information on replacing thebattery.
Common functions – Remote key/Personal Car Communicator (PCC)
G02
1078
Remote key
G02
1079
Personal Car Communicator (PCC)—option
Lock
Unlock
Approach lighting
Trunk unlock/open
Panic alarm
Buttons on the remoteLock – Press the Lock button on the remoteonce to lock all doors and the trunk. The turnsignals will flash once to confirm locking.
Unlock – Press the Unlock button on theremote once to unlock the driver's door. Theturn signals will flash twice to confirm unlock-ing.
After a short pause, press the Unlock button asecond time within 10 seconds to unlock theother doors and the trunk.
This function can be changed so that all doorsunlock at the same time under Car settings
lock settings Doors, unlock. See page120 for a description of the menu system.
Approach lighting – As you approach thevehicle, press the button on the remote controlto light the interior lighting, parking lights,license plate lighting and the lights in the doormirrors (option).
These lights will switch off automatically after30, 60 or 90 seconds, see page 120 for moreinformation.
02 Locks and alarm
Remote key and key blade
02
53
Unlock/open trunk
Press once: This unlocks the trunk (but doesnot open it) and disarms the alarm and optionalmovement sensor (the alarm indicator light onthe dashboard will go out). If the trunk is notopened within two minutes it will automaticallyrelock and the alarm will be rearmed.
Press twice: This both unlocks the trunk andpops it open slightly.
NOTE
Any excess weight (snow, etc.) on the trunklid may prevent it from opening.
See also page 62 for information on openingthe trunk from the passenger compartment.
After closing, the trunk will not automaticallyrelock. Press Lock to relock it and rearm thealarm.
Panic alarm – This button can be used toattract attention during emergency situations.
To activate the panic alarm, press and hold thisbutton for at least 3 seconds or press it twicewithin 3 seconds. The turn signals and horn willbe activated. The panic alarm will stop auto-matically after 2 minutes and 45 seconds.
To deactivate, wait approximately 5 secondsand press the button again.
These lights will switch off automatically after30, 60 or 90 seconds, see page 120 for moreinformation.
The Panic alarm button will not unlock the vehi-cle.
RangeThe remote key has a range of approximately60 ft. (20 m) from the vehicle.
NOTE
Buildings or other obstacles may interferewith the function of the remote key. Thevehicle can also be locked or unlocked withthe key blade, see page 55.
Functions – PCC
G02
1080
Information button
Indicator lights
Pressing the information button providescertain information about the vehicle with thehelp of the indicator lights .
Using the information button1. Press the information button .
2. All of the indicator lights will flash sequen-tially for approximately 7 seconds to indi-cate that the PCC is receiving informationfrom the vehicle. If any of the buttons arepressed during this 7-second period,transmission of information to the PCC willbe interrupted.
02 Locks and alarm
Remote key and key blade
02
54
NOTE
If none of the indicator lights flash when theinformation button has been pressed sev-eral times from different places in relation tothe vehicle, contact an authorized Volvoservice technician.
The indicator lights provide informationaccording to the illustration:
G03
0262
Steady green light: the vehicle is correctlylocked.
Steady yellow light: the vehicle is notlocked.
Alternatively flashing red lights (Heartbeatsensor): if the two heartbeat sensor lightsflash, this indicates that someone may be
inside the vehicle. These lights are onlyactivated if the alarm has been triggered.
Steady red light: the alarm has been trig-gered.
RangeThe PCC's lock and unlock functions have arange of approximately 60 ft. (20 m) from thevehicle.
NOTE
• The approach lighting, panic alarm, andthe functions controlled by the informa-tion button have a range of approxi-mately 300 ft (100 m) from the vehicle.
• Buildings or other obstacles may inter-fere with the function of the PCC.
Outside of the PCC´s rangeIf the PCC is more than approximately 300 ft(100 m) from the vehicle when the informationbutton is pressed, no new information will bereceived. The PCC most recently used to lockor unlock the vehicle will show the vehicle'smost recently received status. The indicatorlights will not flash when the information buttonis pressed while the PCC is out of range.
If more than one PCC is used to lock/unlockthe vehicle, only the one used most recently willshow the correct locking status.
NOTE
If none of the indicator lights illuminate whenthe information button is pressed, this maybe because the most recent transmissionbetween the vehicle and the PCC was inter-rupted or impeded by buildings or otherobjects.
Heartbeat SensorThe heartbeat sensor function is a comple-ment to the vehicle's standard alarm, and indi-cates at a distance of up to 300 ft (100 m) thatsomeone may be in the vehicle. The heartbeatsensor only functions if the alarm has beentriggered.
NOTE
The heartbeat sensor registers a person'sheartbeat in the form of vibrations in thevehicle's chassis. For this reason, the sen-sor's function may be impaired in areas withhigh levels of noise or vibrations.
Keyless driveVehicles equipped with the optional PersonalCar Communicator have the keyless drive
02 Locks and alarm
Remote key and key blade
02
55
function, see page 58 for detailed informa-tion.
Detachable key bladeThe key blade can be removed from the remotecontrol. When removed, the key blade can beused as follows:
• To lock/unlock the driver's door
• To lock/unlock the glove compartment(see page 61)
• To enable/disable the valet locking func-tion (see page 57)
Unlocking the doors with the detachedkey bladeInsert the key blade as far as possible in thedriver's door lock. Turn the key blade clock-wise approximately one-quarter turn to unlockthe driver's door only.
NOTE
After unlocking the driver's door with thekey blade, opening the door will trigger thealarm.
To disable the alarm:Insert the remote key in the ignition slot.
Locking the doors with the detached keyblade1. Lock the rear doors and the front passeng-
er's door by pressing the lock button oneach door.
2. Turn the key blade one-quarter turn coun-ter-clockwise to lock the driver's door.
Removing the key blade
G02
1082
Slide the spring loaded catch to the side.
Pull the key blade straight out of the remotecontrol.
Reinserting the key blade in the remotecontrol1. Hold the remote control with the slot for the
key blade up.
2. Carefully slide the key blade into its groove.
3. Gently press the key blade in the grooveuntil it clicks into place.
Replacing batteries in the remote key/PCC
02 Locks and alarm
Remote key and key blade
02
56
Battery type CR 2430, 3 V (one battery in theremote key, two batteries in the PCC)
Opening the remote key/PCC Slide the spring loaded catch to the
side.
Pull the key blade straight out of theremote control.
Insert a small screwdriver in the holebehind the spring loaded catch and care-fully pry up the cover.
NOTE
Turn the remote key with the buttonsupward so that the batteries do not fall outwhen the cover is removed.
Replacing the batteries
CAUTION
When handling batteries, avoid touchingtheir contact surfaces as this could result inpoor battery function in the remote key.
Note the position of the battery's (+) or (–)sides.
Remote key1. Use a screwdriver to pry out the old bat-
tery.
2. Insert a new one with the + side downward.
PCC1. Use a screwdriver to pry out the old bat-
teries.
2. Insert the first new battery with the + sideupward.
3. Insert the plastic spacer over the battery.Insert the second new battery on top of theplastic spacer, with the + side downward.
Re-assembling the remote key1. Press the remote key's cover into place.
2. Hold the remote control with the slot for thekey blade up.
3. Carefully slide the key blade into its groove.
4. Gently press the key blade in the grooveuntil it clicks into place.
Old batteries should be properly recycled.
02 Locks and alarm
Valet locking
02
57
Blocking access to the trunk
G02
1083
Normal locking/unlocking function
G02
1084
Locking/unlocking points with valet locking acti-vated
By utilizing the remote key with the key bladeremoved, the valet locking feature enables you
to block access to the trunk and glove com-partment for e.g., valet parking or when thevehicle is brought to the retailer for service.
With the valet locking function activated:• The vehicle's doors can be locked or
unlocked with the remote
• The engine can be started
• The glove compartment cannot beunlocked
• Access to the trunk is blocked (the trunk lidcannot be unlocked or opened with theremote, and the rear seat backrests cannotbe lowered
Activating the valet locking function
G02
0508
Insert the key blade in the glove compart-ment lock.
Turn the key blade180 degrees clockwise.
Remove the key blade from the lock. Amessage will appear in the instrumentpanel display.
Deactivating the valet locking functionTurn the key blade 180 degrees counterclock-wise in the glove compartment lock to deacti-vate valet locking.
See page 61 for information on locking theglove compartment normally, without activat-ing the valet locking function.
02 Locks and alarm
Keyless drive
02
58
Keyless drive (models with PersonalCar Communicator only)
Keyless locking and unlocking
G02
0577
Range of the keyless drive remote control–5 ft(1.5 meters)
This system makes it possible to unlock andlock the vehicle without having to press anybuttons on the Personal Car Communicators(PCC). It is only necessary to have a keylessdrive remote control in your possession tooperate the central locking system.
NOTE
The buttons on the keyless drive remotecontrol can also be used to lock and unlockthe vehicle, see page 52 for more informa-tion.
Both of the PCCs provided with the vehiclehave the keyless function, and additional onescan be ordered. The system can accommo-date up to six PCCs.
The red rings in the illustration indicate the areaaround the vehicle covered by the keyless driveantennas.
Unlocking the vehicle• A keyless drive remote control must be on
the same side of the vehicle as the door tobe opened, and be within 5 feet(1.5 meters) of the lock or the trunk (see theshaded areas in the illustration).
• Pull a door handle to unlock and open thedoor or press the trunk opening control onthe trunk lid.
The number of doors that are unlocked at thesame time can be set in the vehicle's menusystem, under Car settings Lock settings
Keyless entry. See page 120 for a descrip-tion of the menu system.
NOTE
If the PCC does not function normally (weakbattery, etc.), the vehicle can be unlockedwith the detachable key blade, seepage 50.
Locking the vehicleThe doors and the trunk can be locked bypressing the lock button in any of the outsidedoor handles.
NOTE
On keyless drive vehicles, the gear selectormust be in the Park (P) position, all doorsand the trunk must be closed and the igni-tion must be switched off before the vehiclecan be locked.
Keyless drive remote control and driver'sseat/door mirror memory• When you leave the vehicle with a PCC in
your possession and lock any door, theposition of the driver's seat will be storedin the seat's memory.
• The next time a door is opened by a personwith the same PCC in his/her possession,the driver's seat and door mirrors will auto-matically move to the position that theywere in when the door was most recentlylocked.
02 Locks and alarm
Keyless drive
02
59
NOTE
If several people carrying PCCs approachthe vehicle at the same time, the driver'sseat and door mirrors will assume the posi-tions they were in for the person who opensthe driver's door.
See also page 81 for information on adjustingand storing the seat's position in the seat mem-ory.
Keyless drive information messagesIf all of the PCCs are removed from the vehiclewhile the engine is running or if the ignition isin mode II and all of the doors are closed, amessage will appear in the instrument paneldisplay and an audible signal will sound.
When at least one PCC has been returned tothe car, the message will be erased in the dis-play and the audible signal will stop when:
• A door has been opened and closed
• The PCC has been inserted in the ignitionslot
• The READ button (see page 121 for thelocation of this button) has been pressed.
CAUTION
• Keyless drive remote controls shouldnever be left in the vehicle. In the eventof a break-in, a remote found in thevehicle could make it possible to startthe engine.
• Electromagnetic fields or metalobstructions can interfere with the key-less drive system. Avoid placing theremote control near cellular phones,metallic objects or e.g., in a metal brief-case.
USA – FCC ID:KR55WK48952, KR55WK48964
NOTE
This device complies with part 15 of the FCCRules. Operation is subject to the following twoconditions: (1) This device may not causeharmful interference, and (2) this device mustaccept interference received, including inter-ference that may cause undesired operation.
CAUTION
Changes or modifications not expresslyapproved by the manufacturer could void theuser's authority to operate the equipment.
Siemens VDO
5WK48891
Tested To Comply With FCC Standards
For Automobile Use
Canada – IC:267T-5WK48952,267T-5WK48964, 267T-5WK48891
NOTE
This device complies with RSS -210 of IndustryCanada. Operation is subject to the followingtwo conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept interference received, including inter-ference that may cause undesired operation.
CAUTION
Changes or modifications not expresslyapproved by the manufacturer could void theuser's authority to operate the equipment.
02 Locks and alarm
Keyless drive
02
60
Location of the keyless drive antennas
G02
0479
The keyless drive system has a number ofantennas located at various points in the vehi-cle.
On the inside center of the rear bumper
Left rear door handle
Center of the parcel shelf, on the underside
Ceiling, above the center of the rear seat
Right rear door handle
Under the rear section of the center con-sole
Under the front section of the center con-sole.
WARNING
People with implanted pacemakers shouldnot allow the pacemaker to come closerthan 9 inches (22 cm) to any of the keylessdrive system's antennas. This is to help pre-vent interference between the pacemakerand the keyless drive system.
02 Locks and alarm
Locks
02
61
Locking and unlocking the vehicle
From outside the vehicleThe remote key locks all of the doors and thetrunk.
The first press on the unlock button unlocks thedriver's door and a second press unlocks theother doors and the trunk (see also page 52).
NOTE
The vehicle cannot be locked if a door isopen.
From inside the vehicle
G01
9216
The lock buttons on the door panel can be usedto lock or unlock all doors and the trunk at thesame time.
UnlockingPress the unlock button.
LockingPress the lock button after the front doorshave been closed.
• Each door can be locked individually withthe lock button on the respective doors.The door must be closed first.
• The door can be unlocked by pulling thedoor handle once and opened by pullingthe handle again.
Automatic relockingIf the doors are unlocked, the locks will auto-matically reengage (re-lock) and the alarm willrearm after 2 minutes unless a door or the trunkhas been opened.
Automatic lockingWhen the vehicle starts to move, the doors andtrunk can be locked automatically. This featurecan be turned on or off under Car settings
Lock settings Doors automatic lock.See page 120 for a description of the menusystem.
Glove compartment
G02
0548
The glove compartment can only be lockedand unlocked using the detachable keyblade in the remote key. See page 55 forinformation on removing the key bladefrom the remote key. Insert the key bladein the glove compartment lock.
Turn the key blade 90 degrees clockwise.
Remove the key blade from the lock.
02 Locks and alarm
Locks
02
62
Locking/unlocking the trunk
G02
1093
Trunk unlock button on the remote key
Unlocking the trunk with the remote keyPress the trunk unlock button on theremote.
Press once: This unlocks but does not openthe trunk. The trunk can then be opened bypressing the rubber plate near the trunk lock. Ifthe trunk is not opened within two minutes itwill automatically relock and the alarm will berearmed.
Press twice: This both unlocks the trunk andpops it open slightly.
NOTE
Any excess weight (snow, etc.) on the trunklid may prevent it from opening.
The alarm indicator light on the dashboard willgo out to indicate that the alarm is not moni-toring the entire vehicle. The accessory move-ment and inclination sensors will be automati-cally disconnected.
When the trunk is closed again, it will relock,and all alarm functions will be reactivated.
Locking the trunk with the remote keyPress the lock button on the remote, seepage 52
NOTE
• If the doors are locked while the trunk isopen, the trunk will remain unlockeduntil the vehicle is relocked by pressingthe Lock button on the remote control.
• On keyless drive vehicles, the gearselector must be in the Park (P) position,all doors and the trunk must be closedand the ignition must be switched offbefore the vehicle can be locked.
Opening the trunk from the passengercompartment
G02
2853
Press the button on the lighting panel to unlock and pop open the trunk
NOTE
The taillights will illuminate automatically fora short period when the trunk has beenopened.
02 Locks and alarm
Locks
02
63
Unlocking the trunk with the key blade
If the remote key is not functioning properly,the trunk can be unlocked with the detachablekey blade. See page 55 for information onremoving the key blade from the remote key.
Pull out the cover over the trunk’s keyhole.
Unlock the trunk by inserting the key bladein the keyhole and turning a half turn coun-terclockwise as shown in the illustration.
Opening the trunk from the inside (U.S.models only)
G02
2920
Opening the trunk from the inside
The S80 is equipped with a florescent handleon the inside of the trunk lid, which can be usedin an emergency situation to open the trunkfrom the inside. Pull the handle down to releasethe trunk lid. After use, the handle must bepushed back into its original position before thetrunk can be closed.
This handle is not intended to be used toanchor the trunk lid when long loads are beingtransported.
WARNING
• Keep vehicle doors and trunk lockedand keep keys out of a child’s reach.Unsupervised children could lock them-selves in an open trunk and risk injury.Children should be taught not to play invehicles.
• On hot days, the temperature in thetrunk or vehicle interior can rise veryquickly. Exposure of people to thesehigh temperatures for even a shortperiod of time can cause heat-relatedinjury or death. Small children are par-ticularly at risk.
02 Locks and alarm
Alarm
02
64
The alarm systemThe alarm is automatically armed whenever thevehicle is locked with the remote key oroptional Personal Car Communicator.
When armed, the alarm continuously monitorsa number of points on the vehicle. The follow-ing conditions will trigger the alarm:
• The hood is forced open.
• The trunk is forced open
• A door is forced open.
• The ignition slot is tampered with.
• An attempt is made to start the vehicle witha non-approved key (a key not coded tothe car's ignition).
• If there is movement in the passenger com-partment (if the vehicle is equipped withthe accessory movement sensor).
• The vehicle is lifted or towed (if the vehicleis equipped with the accessory inclinationsensor).
• The battery is disconnected (while thealarm is armed).
• The siren is disconnected when the alarmis disarmed.
A message will appear in the information dis-play if a fault should occur in the alarm system.Contact an authorized Volvo service techni-cian.
NOTE
Do not attempt to repair any of the compo-nents in the alarm system yourself. Thiscould affect the insurance policy on thevehicle.
The alarm indicator light
The status of the alarm system is indicated bythe indicator light on the dashboard (see illus-tration):
• Indicator light off – the alarm is not armed
• The indicator light flashes at one-secondintervals – the alarm is armed
• The indicator light flashes rapidly beforethe remote key is inserted in the ignitionslot – the alarm has been triggered.
Arming the alarmPress the Lock button on the remote key.One long flash of the turn signals will con-firm that the alarm is armed.
Alarm confirmation settings can be changedunder Car settings Lock settingsKeyless entry. See page 120 for a descriptionof the menu system.
USA FCC ID: MAYDA 5823(3)This device complies with part 15 of the FCCrules. Operation is subject to the following con-ditions: (1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, including interfer-ence that may cause undesired operation.
Canada IC: 4405A-DA 5823(3)
Movement sensor DA5823 by Dynex Operationis subject to the following conditions: (1) thisdevice may not cause interference, and (2) thisdevice must accept any interference, includinginterference that may cause undesired opera-tion of the device.
02 Locks and alarm
Alarm
02
65
Disarming the alarmPress the Unlock button on the remote key.> Two short flashes from the car's direc-
tion indicators confirm that the alarmhas been deactivated and that all doorsare unlocked.
Turning off (stopping) the alarmIf the alarm is sounding, it can be stopped bypressing the Unlock button on the remote con-trol or by inserting the remote key in the ignitionslot. Two short flashes from the car's directionindicators confirm that the alarm has beenturned off.
Other alarm-related functions
Automatic re-armingIf the doors are unlocked, the locks will auto-matically reengage (re-lock) and the alarm willre-arm after 2 minutes unless a door or thetrunk has been opened.
Audible/visual alarm signal• An audible alarm signal is given by a bat-
tery powered siren. The alarm cycle lastsfor 30 seconds.
• The visual alarm signal is given by flashingall turn signals for approximately 5 minutesor until the alarm is turned off.
Remote key not functioningIf the remote key is not functioning properly,the alarm can be turned off and the vehicle canbe started as follows:
1. Open the driver's door with the key blade.This will trigger the alarm.
2. Insert the remote key into the ignition slot.This will turn off the alarm.
Reduced alarm function
Turning off the accessory alarm sensors
G02
1360
Navigation (left/rght/up/down) buttons
ENTER
MENU
EXIT
In certain situations it may be desirable to turnoff the accessory inclination and movementalarm sensors if, for example, you drive yourvehicle onto a ferry where the rocking of theboat could trigger the alarm or if a pet is left inthe vehicle with the doors locked.
The vehicle's menu system is used for turningoff these sensors (see page 120 for a descrip-tion of the menu system).
1. Go into the menu under Car settings.
2. Select Reduced guard (Press Enter tochoose).
3. Two alternatives are now available:
• Activate once. If this alternative isselected, Reduced guard–seemanual will appear in the instrumentpanel display and the accessory incli-nation and movement alarm sensors willbe deactivated when the vehicle islocked.
• Ask on exit. If this alternative isselected, the message Press ENTERto reduce guard until engine isstarted—Press EXIT to cancel willappear in the center console displayeach time the engine is turned off andthe accessory inclination and move-ment alarm sensors will be deactivatedwhen the vehicle is locked.
02 Locks and alarm
Alarm
02
66
4. Press ENTER and lock the vehicle.
The next time the engine is started, the alarmsystem will be reset and Full guard will appearin the instrument panel display. The accessoryinclination and movement alarm sensors will bereactivated.
In either of the alternatives, if you prefer not todeactivate the accessory inclination and move-ment alarm sensors, do not make a choice inthe menu or press EXIT and lock the vehicle.
02 Locks and alarm
02
67
G020912
68
Instruments and controls........................................................................ 70Ignition modes........................................................................................ 78Seats....................................................................................................... 80Seats S80 Executive ............................................................................. 85Steering wheel........................................................................................ 87Lighting................................................................................................... 88Wipers and washers................................................................................ 94Power windows....................................................................................... 96Mirrors..................................................................................................... 98Power moonroof................................................................................... 100HomeLink® Wireless Control System (option)..................................... 102Starting the engine................................................................................ 105Transmission......................................................................................... 109Brakes................................................................................................... 112Parking brake........................................................................................ 114
03YOUR DRIVING ENVIRONMENT
03 Your driving environment
Instruments and controls
03
70
Instrument overview
G02
1107
03 Your driving environment
Instruments and controls
03
71
Function Page
Menus and mes-sages, turn signals,high/low beams,trip computer
120, 91,88, 151
Cruise control 157
Horn, airbag 87, 18
Main instrumentpanel
71
Menu system, audiocontrols
131
Ignition slot 78
START/STOPENGINE button
78
Hazard warningflashers
90
Door handle –
In-door control pan-els (power win-dows, mirrors,power child safetylocks, central lock-ing button)
96, 98,47, 61
Function Page
Menu controls,audio and climatecontrol systems
120, 134,126
Center console but-tons
120
Gear selector 109
Controls for activechassis (Four-C)
156
Wipers and washers 94, 95
Steering wheeladjustment
87
Parking brake 114
Hood opening con-trol
215
Seat adjustmentcontrols
80
Lighting panel, but-tons for openingfuel filler door andunlocking andopening the trunk
88, 200,62
Information displays
G01
0604
Information displays in the instrument panel
The information displays (1) show informationon some of the vehicle's functions, such ascruise control, the trip computer and mes-sages. The information is shown with text andsymbols.
More detailed information can be found in thedescriptions of the functions that use the infor-mation displays.
03 Your driving environment
Instruments and controls
03
72
Gauges
G01
0605
Gauges in the instrument panel
Speedometer
Fuel gauge. Please note that the fuel levelindicator in the gauge moves from right toleft as the amount of fuel in the tankdecreases. See also the section on refuel-ing beginning on page 198. See page151 for more information on fuel level andconsumption.
The tachometer shows engine speed inthousands of revolutions per minute (rpm).Do not drive continuously with the needlein the red area of the gauge. The enginemanagement system will automaticallyprevent excessively high engines speeds.This will be noticeable as a pronouncedunevenness in engine speed.
Indicator, information, and warningsymbols
G01
0604
Indicator and warning symbols
Indicator and information symbols
Indicator and warning symbols
High beam and turn signal indicators
Function checkAll indicator and warning symbols light up inignition mode II or when the engine is started.When the engine has started, all the symbolsshould go out except the parking brake sym-bol, which only goes out when the brake isdisengaged.
If the engine does not start or if the functioncheck is carried out in ignition mode II, all sym-bols go out after 5 seconds except the symbol
for faults in the vehicle's emissions system andthe symbol for low oil pressure.
Certain symbols may not have their functionsillustrated, depending on the vehicle's equip-ment.
Indicator and warning symbols
Symbol Description
Trailer turn signal indicator
CHECKENGINE
Malfunction indicator light
Anti-lock brake system (ABS)
Rear fog light on
Stability system
Tire pressure monitoring sen-sor (TPMS)
Low fuel level
Information symbol, see textin information display
High beam indicator
03 Your driving environment
Instruments and controls
03
73
Symbol Description
Left turn signal indicator
Right turn signal indicator
Trailer turn signal indicatorIf you are towing a trailer, this light will flashsimultaneously with the trailer's turn signals. Ifthe light does not flash, or if they flash fasterthan usual when signaling a turn, the turn sig-nals on the trailer or on the vehicle are notfunctioning properly.
CHECKENGINE Malfunction Indicator Light
As you drive, a computer called On-BoardDiagnostics II (OBDII) monitors your vehicle'sengine, transmission, electrical and emissionsystems.
The malfunction indicator (CHECK ENGINE)light will illuminate if the computer senses acondition that potentially may need correcting.When this happens, please have your vehiclechecked by a trained and qualified Volvo serv-ice technician as soon as possible.
A malfunction indicator (CHECK ENGINE) lightmay have many causes. Sometimes, you maynot notice a change in your car's behavior.Even so, an uncorrected condition could hurt
fuel economy, emission controls, and drivabil-ity. Extended driving without correcting thecause could even damage other componentsin your vehicle.
This light may illuminate if the fuel filler cap isnot closed tightly or if the engine was runningwhile the vehicle was refueled.
Canadian models are equipped with this sym-
bol:
Anti-lock Brake System (ABS)warning lightIf the warning light comes on, there may be amalfunction in the ABS system (the standardbraking system will still function). Check thesystem by:
1. Stopping in a safe place and switching offthe ignition.
2. Restart the engine.
3. If the warning light goes off, no furtheraction is required.
If the warning light remains on, the vehicleshould be driven to a trained and qualifiedVolvo service technician for inspection, seepage 112 for additional information.
Canadian models are equipped with this sym-
bol:
Rear fog lightThis symbol indicates that the rear fog light(located in the driver's side tail light cluster) ison.
Stability systemThis indicator symbol flashes when the DSTC(Dynamic Stability and Traction Control sys-tem) is actively working to stabilize the vehicle,see page 154 for more detailed information.
Tire pressure monitoring system(TPMS) – optionThis symbol illuminates to indicate that tirepressure in one or more tires is low, seepage 261 for detailed information.
Low fuel levelWhen this light comes on, the vehicle shouldbe refueled as soon as possible.
Information symbolThe information symbol illuminates and a textmessage is displayed if a fault is detected inone of the vehicle's systems. The message canbe erased and the symbol can be turned off bypressing the READ button (see page 121 forinformation) or this will take place automati-cally after a short time (the length of time varies,depending on the function affected).
03 Your driving environment
Instruments and controls
03
74
The information symbol may also illuminatetogether with other symbols.
High beam indicatorThis symbol illuminates when the high beamheadlights are on, or if the high beam flashfunction is used.
Left turn signal indicator
Right turn signal indicator
NOTE
• Both turn signal indicators will flashwhen the hazard warning flashers areused.
• If either of these indicators flash fasterthan normal, the direction indicators arenot functioning properly.
Indicator and warning symbols
Symbol Description
Low oil pressure
Parking brake applied
SRS airbags
Symbol Description
Seat belt reminder
Generator not charging
Fault in the brake system
Warning symbol
Low oil pressureIf the light comes on while driving, stop thevehicle, stop the engine immediately, andcheck the engine oil level. If the oil level is nor-mal and the light stays on after restart, have thevehicle towed to the nearest trained and quali-fied Volvo service technician. This is normal,provided it goes off when the engine speed isincreased.
Parking brake appliedThis symbol illuminates when the parkingbrake is applied. On models equipped with theelectric parking brake, this symbol flasheswhile the brake is being applied and then glowssteadily.
A flashing symbol means that a fault has beendetected. See the message in the informationdisplay.
Canadian models are equipped with this sym-
bol:
NOTE
This symbol also comes on when themechanical parking brake is only slightlyapplied.
Airbags – SRSIf this light comes on while the vehicle is beingdriven, or remains on for longer than approxi-mately 10 seconds after the vehicle has beenstarted, the SRS system's diagnostic functionshave detected a fault in a seat belt lock or pre-tensioner, a front airbag, side impact airbag,and/or an inflatable curtain. Have the system(s)inspected by a trained and qualified Volvoservice technician as soon as possible.
Seat belt reminderThis symbol comes on for approximately 6 sec-onds if the driver has not fastened his or herseat belt.
Generator not chargingThis symbol comes on during driving if a faulthas occurred in the electrical system. Contactan authorized Volvo workshop.
03 Your driving environment
Instruments and controls
03
75
Engine temperatureEngine overheating can result from low oil orcoolant levels, towing or hard driving at highheat and altitude, or mechanical malfunction.Engine overheating will be signaled with textand a red warning triangle in the middle of theinstrument display. The exact text will dependon the degree of overheating. It may range from"HIGH ENGINE TEMP – SLOW DOWN" to"HIGH ENGINE TEMP – STOP ENGINE." Ifappropriate, other messages, such as"COOLANT LEVEL LOW" will also be dis-played. If your engine does overheat so thatyou must stop the engine, always allow theengine to cool before attempting to check oiland coolant levels.
Fault in brake systemIf this symbol lights, the brake fluid level maybe too low. Stop the vehicle in a safe place andcheck the level in the brake fluid reservoir, seepage 215. If the level in the reservoir is belowMIN, the vehicle should be transported to anauthorized Volvo workshop to have the brakesystem checked.
Canadian models are equipped with this sym-bol:
If the and symbols come on atthe same time, there may be a fault in the brakeforce distribution system.
1. Stop the vehicle in a safe place and turn offthe engine.
2. Restart the engine.
• If both symbols extinguish, continue driv-ing.
• If the symbols remain on, check the level inthe brake fluid reservoir, see page 215. Ifthe brake fluid level is normal but the sym-bols are still lit, the vehicle can be driven,with great care, to an authorized Volvoworkshop to have the brake systemchecked.
• If the level in the reservoir is below MIN, thevehicle should be transported to an author-ized Volvo workshop to have the brakesystem checked.
WARNING
• If the fluid level is below the MIN markin the reservoir or if a warning messageis displayed in the text window: DONOT DRIVE. Have the vehicle towed toa trained and qualified Volvo servicetechnician and have the brake systeminspected.
• If the ABS and Brake system lights areon at the same time, there is a risk ofreduced vehicle stability.
Warning symbolThe red warning symbol comes on when a faulthas been indicated which could affect thesafety and/or drivability of the vehicle. Anexplanatory text is shown on the informationdisplay at the same time. The symbol remainsvisible until the fault has been rectified but thetext message can be cleared with the READbutton, see page 121. The warning symbol canalso come on in conjunction with other sym-bols.
Action:
1. Stop in a safe place. Do not drive the vehi-cle further.
2. Read the information on the informationdisplay. Implement the action in accord-ance with the message in the display. Clearthe message using READ.
Reminder – doors not closedIf one of the doors, the hood or trunk lid is notclosed properly, the information or warningsymbol comes on together with an explanatorytext message in the instrument panel. Stop thevehicle in a safe place as soon as possible andclose the door, hood or trunk.
If the vehicle is driven at a speedlower than approximately 5 mph
(7 km/h), the information symbol comes on.
03 Your driving environment
Instruments and controls
03
76
If the vehicle is driven at a speedhigher than approximately 5 mph
(7 km/h), the warning symbol comes on.
Trip odometers
G01
0608
Trip odometers and reset button
Odometer display
Button for toggling between T1 and T2,and for resetting the odometer
The trip odometers are used to measure shortdistances. A short press the button togglesbetween the two trip odometers T1 and T2. Along press (more than 2 seconds) resets anactive trip odometer to zero. The distance isshown in the display.
Clock
G01
0609
Clock and setting control
Display
Control for setting the clock
Turn the control clockwise/counterclockwiseto set the time. The set time is shown in theinformation display.
The clock may be temporarily replaced by asymbol in conjunction with a message, seepage 121.
Analogue clock (S80 Executive only)
G02
9076
Analogue clock
Button for setting the clock back.
Burton for setting the clock ahead.
The analogue clock is located on the dash-board, above the glove compartment.
Use either of the buttons to move the clock'shands back or ahead. This can be done in twoways:
To set the clock 1:
1. Hold down the button.> The hand will move slowly for the first
5 minute time change and then movefaster.
2. Release the button when the time shownon the clock is correct.
03 Your driving environment
Instruments and controls
03
77
To set the clock 2:
Press the button quickly.> The hand will move at approximately
10-second intervals.
03 Your driving environment
Ignition modes
03
78
Functions
G02
4099
Ignition slot with remote key, start/stop button
Inserting and removing the remote keyThe various ignition modes are accessed byinserting the remote key into the ignition slot.
The remote key can be removed from the igni-tion slot by pressing the key in. It will then beejected slightly and can be removed from theslot. The gear selector must be in position P(Park).
NOTE
The brake pedal must not be depressedwhen accessing ignition modes I or II.
CAUTION
Foreign objects in the ignition slot canimpair function or damage the lock.
Ignition mode 0Insert the remote key in the ignition slot.
Ignition mode IPress the remote key into the ignition slotand press START/STOP ENGINE.
Ignition mode IIPress the remote key into the ignition slotand press START/STOP ENGINE forapprox. 2 seconds.
Ignition mode III (engine start)Start the engine, see page 105.
Stopping the enginePress START/STOP ENGINE. (If theengine is running and the vehicle is mov-ing, keep the button depressed until theengine stops).
Return to ignition mode 0Press START/STOP ENGINE to returnfrom I, II, or III to ignition mode 0.
Posi-tion
Function
0 Odometer, clock and tempera-ture gauge are illuminated. Steer-ing lock is deactivated. The audiosystem can be used.
I Moonroof, power windows, cli-mate system blower, ECC, wind-shield wipers can be used.
II The headlights come on. Warn-ing/indicator lights come on for5 seconds. All equipment oper-ates apart from heated seats andrear window defroster, whichonly work when the engine is run-ning.
III The starter motor will operateuntil the engine has started.
Functions with timerThe audio system can be operated without akey for 15 minutes at a time by pressing thePOWER button. The power windows work forseveral minutes after the key has beenremoved, although not after the door has beenopened.
03 Your driving environment
Ignition modes
03
79
NOTE
Use the POWER button for the audio sys-tem when the engine is not running to avoiddischarging the battery.
03 Your driving environment
Seats
03
80
Front seats
G02
1127
Lumbar support: turn the control for firmeror softer lumbar support.
Front-rear adjustment: lift the bar andmove the seat to the position of yourchoice.
Raise/lower front edge of seat cushion,pump up/down.
Backrest tilt: turn the control to adjust theangle of the backrest.
Raise/lower the seat, pump up/down.
Control panel for power seat.
WARNING
• Do not adjust the seat while driving. Theseat should be adjusted so that thebrake pedal can be depressed fully. Inaddition, position the seat as far rear-ward as comfort and control allow.
• Check that the seat is securely lockedinto position after adjusting.
Folding the front seat backrest
G02
1129
The front passenger seat backrest can befolded to a horizontal position to make room fora long load. Fold the backrest as follows:
Move the seat as far back as possible.
Adjust the backrest to an upright position.
Lift the catches on the rear of the backrest.
Without releasing the catches, push thebackrest forward.
Move the seat as far forward as possibleso that the head restraint slides under theglove compartment.
WARNING
Cover sharp edges on the load to help pre-vent injury to occupants. Secure the load tohelp prevent shifting during sudden stops.
Power seat
G02
1133
Front edge of seat cushion up/down
Seat forward/rearward and up/down
Backrest tilt
03 Your driving environment
Seats
03
81
OperationThe seats can be adjusted for a short periodafter unlocking the door with the remote con-trol without the key in the ignition slot. Seatadjustment is normally made when the ignitionis on and can always be made when the engineis running.
NOTE
• Only one of the power seat's controlscan be used at the same time.
• The power seats have an overload pro-tector that activates if a seat is blockedby any object. If this occurs, switch offthe ignition (key in position 0) and waitfor a short period before operating theseat again.
Seat with memory function (option)
G02
1134
Stored seat position
Stored seat position
Stored seat position
Memory button
Programming the memoryThree different seating and door mirror posi-tions can be stored in the driver seat's memory.
The following example explains how button 1can be programmed. Buttons 2 and 3 can beprogrammed in the same way.
To program (store) a seat position and doormirror position in button 1:
1. Move the seat (and door mirrors) to thedesired position using the seat and mirroradjustment controls.
2. Press and hold down the M (memory) but-ton.
3. With the memory button depressed, pressbutton 1 briefly to store the current positionfor the seat/mirrors.
To move the seat and mirrors to the positionthat they were in when a button was pro-grammed:
Press and hold down button 1 until the seatand mirrors stop moving.
NOTE
As a safety precaution, the seat will stopautomatically if the button is released beforethe seat has reached the preset position.
Remote keyless entry system and thedriver's seatThe remote control transmitter also controlsthe position of the power driver's seat in thefollowing way:
1. Adjust the seat to your preferences.
2. When you leave your vehicle, lock it usingthe remote control.
03 Your driving environment
Seats
03
82
The position of the driver's seat is now storedin the remote control's memory.
Automatic seat adjustmentTo move the seat to the position in which youleft it:
1. Unlock the driver's door with the sameremote control (the one used to lock thedoors)
2. Open the driver's door within 2 minutes.
The driver's seat will automatically move to theposition in which you left it.
NOTE
• The key memory is independent of theseat memory.
• The seat will Move to this position evenif someone else has moved it to a dif-ferent seating position and locked thevehicle with a different remote control.
• This feature will work in the same waywith all of the remote control transmit-ters that you use with your vehicle.
The function can be activated/deactivatedunder Car key memory Seat & mirrorpositions. For a description of the menu sys-tem, see the information beginning on page120.
Emergency stopIf the seat accidentally begins to move, pressone of the buttons to stop the seat.
WARNING
• Because the driver's seat can beadjusted with the ignition off, childrenshould never be left unattended in thevehicle.
• Movement of the seat can be STOPPEDat any time by pressing any button onthe power seat control panel.
• Do not adjust the seat while driving. Theseat should be adjusted so that thebrake pedal can be depressed fully. Inaddition, position the seat as far rear-ward as comfort and control allow.
• The seat rails on the floor must not beobstructed in any way when the seat isin motion.
Heated/ventilated seats (option)See page 127.
Rear seats
Folding down the rear seat backrests
G02
1135
The rear seat backrests can be folded downtogether, or separately, to make it easier totransport long objects.
1. Pull the release control handle(s).
2. Fold the backrest forward. Adjust the cen-ter seat head restraint if necessary.
NOTE
The outboard head restraints must befolded up (in the upright position) beforelowering the backrests.
03 Your driving environment
Seats
03
83
WARNING
• Keep vehicle doors and trunk lockedand keep keys out of a child’s reach.Unsupervised children could lock them-selves in an open trunk and risk injury.Children should be taught not to play invehicles.
• On hot days, the temperature in thetrunk or vehicle interior can rise veryquickly. Exposure of people to thesehigh temperatures for even a shortperiod of time can cause heat-relatedinjury or death. Small children are par-ticularly at risk.
WARNING
• When the backrest(s) are returned to theupright position, check that it is properlylocked in place. The red indicatorsshould not be visible.
• Return the outboard head restraints tothe upright position.
• Long loads should always be securelyanchored to help avoid injury in theevent of a sudden stop.
• Always turn the engine off and apply theparking brake when loading/unloadingthe vehicle.
• Place the transmission in the Park (P)position to help prevent inadvertentmovement of the gear selector.
• On hot days, the temperature in thevehicle interior can rise very quickly.Exposure of people to these high tem-peratures for even a short period of timecan cause heat-related injury or death.Small children are particularly at risk.
Rear center head restraint
G02
1136
The center head restraint should be adjustedaccording to the passenger’s height. Therestraint should be carefully adjusted to sup-port the occupant’s head.
Pull the head restraint up as required. To lower,press the button at the base of the headrestraint’s left support while pressing the headrestrain down.
WARNING
The center rear seat head restraint shouldonly be in its lowest position when this seatis NOT occupied. When the center positionis occupied, the head restraint should becorrectly adjusted to the passenger’sheight.
03 Your driving environment
Seats
03
84
Automatically lowering the rear seat’soutboard head restraints
G02
1137
1. The ignition must be in mode I or II.
2. Press the button to lower the rear headrestraints for improved visibility.
WARNING
For safety reasons, no one should beallowed to sit in the outboard rear seat posi-tions if the head restraints are folded down.If these positions are occupied, the headrestraints should be in the upright (fixed)position.
NOTE
• The head restraint must be returned tothe upright position manually.
• The outboard head restraints cannot befolded down on models that are notequipped with this button.
03 Your driving environment
Seats S80 Executive
03
85
Front seats
G03
0131
Button for moving the passenger's seatforward/rearward
Button for massage and lumbar support
Massage
G03
0132
Button for activating the massage function
Firm massage
Gentle massage
Each front seat has a massage function in itsbackrest. The massage action is done with aircushions, which can be adjusted to a firm orgentle setting. When the setting has beenmade, the massaging action is carried out incycles as follows: massage 6 minutes – pause4 minutes – massage 6 minutes, etc.
When the button is in the center position or ifthe ignition is in mode 0, the massage functionis switched off.
Lumbar support
G03
0227
Button for adjusting lumbar support
The lumbar support uses the same air cushionsas the massage function. The button can beused to adjust the amount of support in fourdirections, as shown in the illustration.
Lumbar support can be only be adjusted whenthe massage function is switched off.
A memory function stores the lumbar supportsetting and this support will resume after themassage function has been switched off orafter the vehicle has been parked for anextended period of time.
03 Your driving environment
Seats S80 Executive
03
86
Moving the passenger's seat
G03
0137
The front passenger's seat can be moved for-ward/rearward from the driver's seat or the rearseat.
Press the front section of the button to movethe seat forward or the rear section of the but-ton to move the seat rearward. This buttondoes not affect the backrest tilt.
03 Your driving environment
Steering wheel
03
87
Adjusting
G02
1138
Adjusting the steering wheel
Lever for releasing/locking the steeringwheel
Possible positions
The steering wheel can be adjusted for bothheight and reach:
1. Pull the lever toward you to release thesteering wheel.
2. Adjust the steering wheel to the positionthat suits you.
3. Push back the lever to lock the steeringwheel in place. If the lever is difficult topush into place, press the steering wheellightly at the same time as you push thelever.
WARNING
Never adjust the steering wheel while driv-ing.
With speed-dependent power steering (option)the level of steering force can be adjusted, seepage 156.
Keypads
G02
1139
Keypads in the steering wheel
Cruise control, see page 157. Adaptivecruise control (option), see page 165.
Audio controls, see page 131.
Horn
G02
1140
Horn
Press the steering wheel hub to sound thehorn.
03 Your driving environment
Lighting
03
88
Lighting panel
G02
2854
Overview, light switches
Thumb wheel1 for adjusting display andinstrument lighting
Rear fog light
Front fog lights
Headlights/parking lights
Instrument lightingIllumination of the display and instrument lightswill vary, depending on ignition mode.
The display lighting is automatically subduedin darkness and the sensitivity is set with thethumb wheel.
The intensity of the instrument lighting isadjusted with the thumb wheel.
High/low beam headlights
21
G02
2855
Headlight switch and lever
Daytime running lights/nohigh beams
Parking lights
Low beams
Low beamsWhen the engine is started, the low beams areactivated automatically (daytime running lights)if the headlight control is in position 0 or
.
Daytime running lights can be deactivated bya trained and qualified Volvo service techni-cian.
NOTE
• The use of daytime running lights ismandatory in Canada.
• Continuous high beams cannot be acti-vated when the headlight switch is in
position or . High beamflash will function in these positions.
High beam flashMove the lever toward the steering wheelto position . The high beams come onuntil the lever is released.
High/low beam headlights
Continuous high beams1. Set the ignition to mode II.
1 On the S80 Executive, the thumb wheel also adjusts the lighting level in the door handles, storage compartments in the doors, the analogue clock, the cup holders between the front seats and thefront footwell lighting.
03 Your driving environment
Lighting
03
89
2.With the light switch in position ,pull the turn signal lever toward the steer-ing wheel to position to toggle betweenhigh and low beams (this also applies onmodels equipped with the optional ActiveBi-Xenon headlights).>
The symbol illuminates in theinstrument panel to indicate that thehigh beams are on.
Active Bi-Xenon Lights (ABL)–optionG
0211
43
Headlight pattern with ABL deactivated (left) andactivated (right) respectively
When the ABL function is activated, the head-light beams adjust laterally to help light up acurve according to movements of the steeringwheel (see the right-pointing beam in the illus-tration).
This function is activated automatically whenthe engine is started and can be deactivated/reactivated by pressing the ABL button
in the center console. This buttonlights up when the ABL function is activated,and will flash if there is a fault in the system.
NOTE
This function is only active in twilight or darkconditions, and only when the vehicle is inmotion.
Parking lights
G02
2907
Headlight control in position for parking lights
The front and rear parking lights can be turnedon even when the ignition is switched off.
Turn the headlight control to the center posi-tion (the license plate lighting comes on at thesame time).
The lighting also comes on when the trunk isopened in order to alert anyone travelingbehind your vehicle.
Brake lightsThe brake lights come on automatically whenthe brakes are applied.
Emergency brake lights (EBL)Emergency Brake Lights, EBL, activate in theevent of sudden braking or if the ABS systemis activated. This function causes an additionaltaillight on each side of the vehicle to illuminateto help alert vehicles traveling behind.
The EBL function activates if:
• The ABS system activates for more thanapproximately a half second
• In the event of sudden braking while thevehicle is moving at speeds above approx-imately 6 mph (10 km/h)
When the vehicle has come to a stop, the brakelights and additional taillights remain on for aslong as the brake pedal is depressed or untilbraking force on the vehicle is reduced.
03 Your driving environment
Lighting
03
90
Front fog lights
G01
4402
Button for front fog lights
The front fog lights can be switched ontogether with high/low beams or the parkinglights.
Press the button to switch the fog lights on/off. The light in the button comes on whenthe fog lights are on.
NOTE
Regulations regarding the use of the frontfog lights may vary, depending on whereyou drive.
Rear fog light
G01
4403
Button for rear fog light
The single rear fog light is located in the driver'sside taillight cluster. The rear fog light will onlyfunction in combination with the high/lowbeam headlights or the optional front fog lights.
Press the button to switch the rear fog lighton/off.> The rear fog light indicator symbol
on the instrument panel and thelight in the button come on when therear fog light is switched on.
NOTE
The rear fog light is considerably brighterthan the normal tail lights and should beused only when conditions such as fog, rain,snow, smoke or dust reduce visibility forother vehicles to less than 500 ft.(150 meters).
Hazard warning flashers
G018707
Location of the hazard warning flasher button
The hazard warning flasher should be used toindicate that the vehicle has become a traffichazard.
To activate the flashers, press the buttonin the center dash. Press the button againto turn off the flashers.
03 Your driving environment
Lighting
03
91
NOTE
• Regulations regarding the use of thehazard warning flasher may vary,depending on where you live.
• The hazard warning flashers will be acti-vated automatically if an airbagdeploys.
Turn signals
2
1
2
1
G02
3315
Turn signals
When changing lanes The driver can automatically flash the turn
signals 3 times by moving the turn signal leverup or down to the first position and releasing it.
When turning Move the lever as far up or down as possi-
ble to start the turn signals. The turn signals willbe cancelled automatically by the movement ofthe steering wheel, or the lever can be returnedto its initial position by hand.
NOTE
• This automatic flashing sequence canbe interrupted by immediately movingthe lever in the opposite direction.
• If the turn signal indicator flashes fasterthan normal, check for a burned-outturn signal bulb.
Interior lighting, front
G02
1149
Light switches, front roof lighting
Drivers side front reading light, on/off
Passenger's side front reading light, on/off
Overhead courtesy lighting.
The lighting in the front part of the passengercompartment is controlled with the buttons (1)and (2) in the roof console.
Switch (3) has three positions for all passengercompartment lighting:
• Off – right side depressed, automatic light-ing off.
• Neutral position.
• On – left side depressed, passenger com-partment lighting on.
03 Your driving environment
Lighting
03
92
Interior lighting, rear
G02
1150
Rear reading lights
The lights are switched on or off by pressingeach respective button.
Courtesy lights/door step lighting(option)The courtesy lights/door step lighting switchon/off automatically when one of the frontdoors is opened/closed.
Glove compartment lightingThe glove compartment lighting switches on/off automatically when the lid is opened/closed.
Overhead courtesy lightingThe passenger compartment lighting isswitched on and off automatically when button(3) is in the neutral position.
The lighting comes on and remains on for30 seconds if:
• the vehicle is unlocked from the outsidewith the key or remote control
• the engine is switched off and the ignitionis in mode 0.
The lighting switches off when:
• the engine is started
• the vehicle is locked from the outside.
The lighting comes on and remains on for twominutes if one of the doors is open.
The passenger compartment lighting can beswitched on and off manually within 30 minutesafter the vehicle has been unlocked.
If the lighting is switched on manually and thevehicle is locked, the courtesy lighting willswitch off automatically after one minute.
Home safe lightingWhen you leave your vehicle at night, you canmake use of the home safe lighting function toilluminate the area in front of the vehicle.
1. Remove the key from the ignition slot.
2. Pull the direction indicator lever as far aspossible towards the steering wheel andrelease it.
3. Exit the vehicle and lock the doors.
The headlights, parking lights, turn signals,lights in the door mirrors, license plate lights,and footwell lighting will illuminate and remainon for 30 2, 60 or 90 seconds. The time intervalcan be set under Car settings Lightsettings Home safe lighting. For adescription of the menu system, seepage 120.
Approach lightingApproach lighting is activated by pressing theapproach light button on the remote key (seethe illustration on page 52).
When the function has been activated, theparking lights, indicator lights, door mirrorlights, license plate lighting, dome lighting anddoor step lighting come on.
2 Factory setting
03 Your driving environment
Lighting
03
93
The time interval for this lighting can be setunder Car settings Light settingsApproach lighting. For a description of themenu system, see page 120.
03 Your driving environment
Wipers and washers
03
94
Windshield wipers/washers
G01
8663
Windshield wipers and washers
Rain sensor (option) on/off
Thumb wheel sensitivity/frequency
CAUTION
• Use ample washer fluid when washingthe windshield. The windshield shouldbe thoroughly wet when the wipers arein operation.
• Before using the wipers, ice and snowshould be removed from the wind-shield/rear window. Be sure the wiperblades are not frozen in place.
Windshield wipers offMove the lever to position 0 to switchoff the windshield wipers.
Single sweepMove the lever upward from position0 to sweep the windshield one stroke
at a time for as long as the lever is held up.
Intermittent wipingWith the lever in this position, you canset the wiper interval by twisting the
thumb wheel upward to increase wiper speedor downward to decrease the speed.
Continuous wipingThe wipers operate at normal speed.
The wipers operate at high speed.
Rain sensor (option)The rain sensor automatically regulates wiperspeed according to the amount of water on thewindshield. The sensitivity of the rain sensorcan be adjusted moving the thumb wheel up(the wipers will sweep the windshield more fre-quently) or down (the wipers will sweep thewindshield less frequently).
NOTE
The wipers will make an extra sweep eachtime the thumb wheel is adjusted upward.
When the rain sensor is activated, the symbol
will illuminate in the instrument panel.
Activating and setting the sensitivityWhen activating the rain sensor, the vehiclemust be running or in ignition mode II and thewindshield wiper lever must be in position 0 orin the single sweep position.
Activate the rain sensor by pressing the button
. The windshield wipers will make onesweep.
Press the lever up for the wipers to make anextra sweep. The rain sensor returns to activemode when the stalk is released back to posi-tion 0.
DeactivatingDeactivate the rain sensor by pressing the but-
ton or press the lever down to anotherwiper position.
The rain sensor is automatically deactivatedwhen the key is removed from the ignition slotor five minutes after the ignition has beenswitched off.
03 Your driving environment
Wipers and washers
03
95
CAUTION
The rain sensor should be deactivated whenwashing the car in an automatic car wash,etc. If the rain sensor function is left on, thewipers will start inadvertently in the carwash and could be damaged.
Windshield washing
G01
9401
Washing function
Move the lever toward the steering wheel tostart the windshield and headlight washers.After the lever is released the wipers make sev-eral extra sweeps.
Heated washer nozzles (option)The washer nozzles are heated automaticallyin cold weather to help prevent the washer fluidfrom freezing.
High-pressure headlight washing(option)High-pressure headlight washing consumes alarge quantity of washer fluid. To save fluid, theheadlights are washed using two alternatives:
• Low/high beam headlights on. The head-lights will be washed the first time the wind-shield is washed. Thereafter, the head-lights will only be washed once for everyfive times the windshield is washed withina 10-minute period.
• Parking lights on. Optional Active Bi-Xenon headlights will be washed once forevery five times the windshield is washed.Normal halogen headlights will not bewashed.
CAUTION
Use ample washer fluid when washing thewindshield. The windshield should be thor-oughly wet when the wipers are in opera-tion.
NOTE
One headlight is washed at a time.
03 Your driving environment
Power windows
03
96
Power windows
G01
8516
Driver's door control panel
Switch for power child safety locks1 anddisengaging rear power window buttons,see page 47
Rear window controls
Front window controls.
WARNING
• Always remove the ignition key whenthe vehicle is unattended.
• Never leave children unattended in thevehicle.
• Make sure that the windows are com-pletely unobstructed before they areoperated.
Operating
G01
8517
Operating the power windows
Manual up/down
Auto up/down.
All power windows can be operated using thecontrol panel in the driver's door. The control
panels in the other doors only operate the win-dow in the respective doors.
For the power windows to function, the ignitionmust be in at least mode I. When the vehiclehas been running, the power windows can beoperated for several minutes after the remotekey has been removed from the ignition slot, oruntil a door has been opened.
NOTE
• Movement of the windows will stop ifthey are obstructed in any way.
• To reduce buffeting wind noise if therear windows are opened, also open thefront windows slightly.
Manual up/downMove one of the controls up/down slightly.> The power windows move up/down as
long as the control is held in position.
Auto up/downMove one of the controls up/down as faras possible and release it.> The window will open or close com-
pletely.
1 Option on certain markets only.
03 Your driving environment
Power windows
03
97
ResettingIf the battery has been disconnected, the autoopen function must be reset so that it will workproperly.
1. Gently raise the front section of the buttonto close the window and hold it for onesecond.
2. Release the button briefly.
3. Raise the front section of the button againfor one second.
Laminated glass (option on certainmarkets only)
This glass is reinforced to help pro-vide protection against break-ins andimproved sound insulation in thepassenger compartment. The wind-
shield and other windows have laminatedglass.
03 Your driving environment
Mirrors
03
98
Power door mirrors
G01
8518
Door mirror controls
Adjusting1. Press the L button for the left door mirror
or the R button for the right door mirror.The light in the button comes on.
2. Adjust the position with the joystick in thecenter.
3. Press the L or R button again. The lightshould no longer be on.
WARNING
Objects seen in the mirrors may appear fur-ther away than they actually are.
Retractable power door mirrors (optionon certain markets only)The mirrors can be retracted for parking/drivingin narrow spaces:
1. Press down the L and R buttons at thesame time.
2. Release them after approximately one sec-ond. The mirrors automatically stop in thefully retracted position.
Fold out the mirrors by pressing down the Land R buttons at the same time. The mirrorsautomatically stop in the fully extended posi-tion.
Storing the position (option)The mirror positions are stored in the key mem-ory when the vehicle has been locked with theremote key. When the vehicle is unlocked withthe same remote control the mirrors and thedriver's seat adopt the stored positions whenthe driver's door is opened.
The function can be activated/deactivatedunder Car key memory Seat & mirrorpositions. For a description of the menu sys-tem, see page 120.
Tilting the door mirror when parking(option)The door mirrors can be tilted down to helpgive the driver a better view along the sides ofthe vehicle, for example when parallel parking.
To acitvate this function, select reverse gearand press the L or R mirror control button to tiltthe mirror down.
The door mirror will reset to its normal position:
• after 10 seconds when reverse is disen-gaged and the car remains stopped.
• immediately when reverse is disengagedand the vehicle's forward speed exceedsapproximately 6 mph (10 km/h).
• immediately if you press the correspond-ing L or R button again.
• when the engine is turned off.
• when the side mirrors are folded in.
NOTE
Only one mirror can be tilted down at a time.
Automatic retraction when lockingWhen the vehicle is locked/unlocked with theremote key the door mirrors are automaticallyretracted/extended.
The function can be activated/deactivatedunder Car settings Retract mirrors when
03 Your driving environment
Mirrors
03
99
locking. For a description of the menu system,see page 120.
Resetting to neutralMirrors that have been moved out of positionby an external force must be electrically resetto the neutral position for electric retracting/extending to work.
• Retract the mirrors with the L and R but-tons.
• Fold them out again with the L and R but-tons.
The mirrors are now reset in neutral position.
Home safe and approach lightingThe light on the door mirrors comes on whenapproach lighting or home safe lighting isselected, see page 92.
Rear window and door mirrordefrosters
G01
8377
Use the defroster to quickly remove mistingand ice from the rear window and the door mir-rors.
Press the button once to start simultaneousrear window and door mirror defrosting. Thelight in the button indicates that the function isactive. Defrosting is deactivated automaticallyand its duration is controlled by the outsidetemperature.
The rear window is demisted/de-iced automat-ically if the vehicle is started in an outside tem-perature lower than 45 °F (7 °C).
Defrosting can be selected under Climatesettings Auto. rear defroster. Selectbetween On or Off.
Interior rearview mirror
Auto-dim functionAn integrated sensor reacts to headlights fromfollowing traffic and automatically reducesglare in the mirror.
03 Your driving environment
Power moonroof
03
100
Power moonroofThe moonroof controls are located in the ceil-ing console near the rearview mirror. Themoonroof can be opened vertically and hori-zontally. The vehicle's must be in ignition modeI or II for the moonroof to be operated.
CAUTION
• Remove ice and snow before openingthe moonroof.
• Do not operate the moonroof if it is fro-zen closed.
• Never place heavy objects on themoonroof.
Sliding moonroof
G02
1343
Sliding moonroof, forward/rearward
Opening, automatic
Opening, manual
Closing, manual
Closing, automatic
Automatic openingPull the switch as far back as possible (tothe position for automatic opening) andrelease it to automatically fully slide openthe moonroof.
Manual openingPull the switch back to the first stop (theposition for manual opening) and hold ituntil the moonroof has opened to the posi-tion of your choice.
Manual closingPush the switch forward to the first stop(the position for manual closing) and holdit until the moonroof has closed to the posi-tion of your choice, or has closed com-pletely.
Automatic closingPush the switch as far forward as possible(the position for automatic closing) andrelease it to automatically close the moon-roof.
WARNING
• During manual closing, if the moonroofis obstructed, immediately open itagain.
• Never open or close the moonroof if it isobstructed in any way.
• Never allow a child to operate themoonroof.
• Never leave a child alone in a vehicle.
• Never extend any object or body partthough the open moonroof, even if thevehicle's ignition is completelyswitched off.
03 Your driving environment
Power moonroof
03
101
Tilt position
G02
8899
Tilt position, raised at the rear edge
Open by pressing the rear edge of the con-trol upward.
Close by pulling the rear edge of the con-trol downward and hold it until the moon-roof has closed completely.
VisorThe moonroof features a sliding visor. The visorslides open automatically when the moonroofis opened, and must be closed manually.
03 Your driving environment
HomeLink® Wireless Control System (option)
03
102
Introduction
G02
9471
The HomeLink Wireless Control System pro-vides a convenient way to replace up to threehand-held radio-frequency (RF) transmittersused to activate devices such as gate opera-tors, garage door openers, entry door locks,security systems, even home lighting. Addi-tional HomeLink information can be found onthe Internet at www.homelink.com.
WARNING
• If you use HomeLink to open a garagedoor or gate, be sure no one is near thegate or door while it is in motion.
• When programming a garage dooropener, it is advised to park outside ofthe garage.
• Do not use HomeLink with any garagedoor opener that lacks safety stop andreverse features as required by U.S.federal safety standards (this includesany garage door opener model manu-factured before April 1, 1982). A garagedoor that cannot detect an object - sig-naling the door to stop and reverse -does not meet current U.S. federalsafety standards. For more information,contact HomeLink at:www.homelink.com.
Retain the original transmitter of the RF deviceyou are programming for use in other vehiclesas well as for future HomeLink programming. Itis also suggested that upon the sale of thevehicle, the programmed HomeLink buttons beerased for security purposes. Refer to “ErasingHomeLink Buttons”.
Programming HomeLink
NOTE
Some vehicles may require the ignitionswitch to be turned on or to the second(“accessories”) position for programmingand/or operation of HomeLink. It is also rec-ommended that a new battery be placed inthe hand-held transmitter of the devicebeing programmed to HomeLink for quickertraining and accurate transmission of theradio-frequency signal.
1. Position the end of your hand-held trans-mitter 1–3 inches (5–14 cm) away from theHomeLink button you wish to programwhile keeping the indicator light in view.
2. Simultaneously press and hold both thechosen HomeLink and hand-held transmit-ter buttons until the HomeLink indicatorlight changes from a slow to a rapidly blink-ing light. Now you may release both theHomeLink and hand-held transmitter but-tons.
03 Your driving environment
HomeLink® Wireless Control System (option)
03
103
NOTE
Some devices may require you to replacethis Programming Step 2 with proceduresnoted in the “Gate Operator / Canadian Pro-gramming” section. If the HomeLink indica-tor light does not change to a rapidlyblinking light after performing these steps,contact HomeLink at www.homelink.com.
3. Firmly press, hold for five seconds andrelease the programmed HomeLink but-ton up to two separate times to activate thedoor. If the door does not activate, pressand hold the just-trained HomeLink buttonand observe the indicator light.
• If the indicator light stays on con-stantly, programming is completeand your device should activate whenthe HomeLink button is pressed andreleased.
• If the indicator light blinks rapidly fortwo seconds and then turns to a con-stant light continue with “Program-ming” steps 4-6 to complete the pro-gramming of a rolling code equippeddevice (most commonly a garage dooropener).
4. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn”or “smart” button. This can usually be
found where the hanging antenna wire isattached to the motor-head unit.
5. Firmly press and release the “learn” or“smart” button. (The name and color of thebutton may vary by manufacturer.) Thereare 30 seconds to initiate step 6.
6. Return to the vehicle and firmly press, holdfor two seconds and release the pro-grammed HomeLink button. Repeat the“press/hold/release” sequence a secondtime, and, depending on the brand of thegarage door opener (or other rolling codeequipped device), repeat this sequence athird time to complete the programmingprocess.
HomeLink should now activate your rollingcode equipped device.
Gate Operator/Canadian ProgrammingCanadian radio-frequency laws require trans-mitter signals to “time-out” (or quit) after sev-eral seconds of transmission – which may notbe long enough for HomeLink to pick up thesignal during programming. Similar to thisCanadian law, some U.S. gate operators aredesigned to “time-out” in the same manner.
If you live in Canada or you are having difficul-ties programming a gate operator or garagedoor opener by using the “Programming” pro-
cedures, replace “Programming HomeLink”step 2 with the following:
• Continue to press and hold the HomeLinkbutton while you press and release -every two seconds (“cycle”) your hand-held transmitter until the HomeLink indica-tor light changes from a slow to a rapidlyblinking light. Now you may release boththe HomeLink and hand-held transmitterbuttons.
Proceed with “Programming” step 3 to com-plete.
Using HomeLinkTo operate, simply press and release the pro-grammed HomeLink button. Activation willnow occur for the trained device (i.e., garagedoor opener, gate operator, security system,entry door lock, home/office lighting, etc.). Forconvenience, the hand-held transmitter of thedevice may also be used at any time. In theevent that there are still programming difficul-ties or questions, contact HomeLink at:www.homelink.com.
03 Your driving environment
HomeLink® Wireless Control System (option)
03
104
Erasing HomeLink ButtonsTo erase programming from the three Home-Link buttons (individual buttons cannot beerased but can be “reprogrammed” as outlinedbelow), follow the step noted:
• Press and hold the two outer HomeLinkbuttons until the indicator light begins toflash-after 10 seconds. Release both but-tons. Do not hold for longer that 20 sec-onds. HomeLink is now in the train (orlearning) mode and can be programmed atany time beginning with “Programming” -step 1.
Reprogramming a Single HomeLinkButtonTo program a device to HomeLink using aHomeLink button previously trained, followthese steps:
1. Press and hold the desired HomeLink but-ton. DO NOT release the button.
2. The indicator light will begin to flash after20 seconds. Without releasing the Home-Link button, proceed with “Programming”- step 1.
For questions or comments, contact HomeLinkat: www.homelink.com or 1–800–355–3515.
This device complies with FCC rules part 15and Industry Canada (IC) RSS-210. Operationis subject to the following two conditions: (1)This device may not cause harmful interfer-ence, and (2) This device must accept anyinterference that may be received includinginterference that may cause undesired opera-tion.
NOTE
The transmitter has been tested and com-plies with FCC and IC rules. Changes ormodifications not expressly approved bythe party responsible for compliance couldvoid the user’s authority to operate thedevice.1
HomeLink and the HomeLink house are regis-tered trademarks of Johnson Controls, Inc.
1 The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met.
03 Your driving environment
Starting the engine
03
105
Starting the engine
G02
4099
Ignition switch with remote key inserted (seepage 78 for more information on ignition modes)
WARNING
Before starting the engine:
• Fasten the seat belt.
• Check that the seat, steering wheel andmirrors are adjusted properly.
• Make sure the brake pedal can bedepressed completely. Adjust the seatif necessary.
1
G03
3762
1. Insert the remote key into the ignition slotwith the buttons upward and the metallickey blade pointing outward (not insertedinto the slot)1.
G03
3763
2. Push lightly on the remote key. It will beautomatically drawn into the ignition slot inthe correct position.
3
G03
3764
3. Depress the brake pedal2. Press andrelease the START/STOP ENGINE button.The autostart function will operate thestarter motor until the engine starts.
The starter motor operates for a maximumof 10 seconds. If the engine has notstarted, repeat the procedure.
WARNING
An extra mat on the driver's floor can causethe accelerator and/or brake pedal to catch.Check that the movement of these pedals isnot impeded. Not more than one protectivefloor covering may be used at one time.
1 On vehicles with the optional keyless drive, it is only necessary to have a remote key in the passenger’s compartment.2 If the vehicle is moving, it is only necessary to press the START/STOP ENGINE button to start the vehicle.
03 Your driving environment
Starting the engine
03
106
WARNING
• Always remove the remote key from theignition slot when leaving the vehicle,especially if there are children in thevehicle.
• Never remove the remote key from theignition slot while driving or when thevehicle is being towed. The steeringlock could otherwise be activated, mak-ing it impossible to steer the vehicle.Never remove the remote key with key-less drive function (option) from thevehicle while driving or during towing.
• Always place the gear selector in Parkand apply the parking brake beforeleaving the vehicle. Never leave thevehicle unattended with the engine run-ning.
• Always open garage doors fully beforestarting the engine inside a garage toensure adequate ventilation. Theexhaust gases contain carbon monox-ide, which is invisible and odorless butvery poisonous.
NOTE
• The idling speed can be noticeablyhigher than normal during cold starts.This is to enable emission control sys-tem can reach normal operating tem-perature as quickly as possible, whichhelps reduce exhaust emissions3.
• Keylock: Your vehicle is equipped witha keylock system. When the engine isswitched off, the gear selector must bein the Park position before the key canbe removed4 from the ignition slot.
CAUTION
• When starting in cold weather, the auto-matic transmission may shift up atslightly higher engine speeds than nor-mal until the automatic transmissionfluid reaches normal operating tem-perature.
• Do not race a cold engine immediatelyafter starting. Oil flow may not reachsome lubrication points fast enough toprevent engine damage.
• The engine should be idling when youmove the gear selector. Never acceler-ate until after you feel the transmissionengage. Accelerating immediately afterselecting a gear will cause harshengagement and premature transmis-sion wear.
• Selecting P or N when idling at a stand-still for prolonged periods of time willhelp prevent overheating of the auto-matic transmission fluid.
Keyless drive (option)Follow steps 3 – 4 for starting the engine.
3 If the gear selector is in the D or R positions and the car is not moving, engine speed (rpm) will be lower and it will take longer for the engine to reach normal operating temperature.4 Does not apply to vehicles with the optional keyless drive.
03 Your driving environment
Starting the engine
03
107
NOTE
For the vehicle to start, one of the vehicle'sremote keys must be in the passenger com-partment.
Jump starting
G02
1347
Connecting the jumper cables
Follow these instructions to jump start yourvehicle's dead battery or to jump start anothervehicle's dead battery using your vehicle. If the12-volt auxiliary battery to be used is in anothervehicle, check that the vehicles are not touch-ing to prevent premature completion of a cir-cuit. Be sure to follow jump starting instruc-tions provided for the other vehicle.
To jump start your vehicle:
1. Switch off the ignition (set the ignition tomode 0, see page 78).
2. First connect the red jumper cable to theauxiliary battery's positive (+) terminal .
3. Fold back the cover over the positive (+)terminal on your vehicle's battery ,marked with a "+" sign, located under afolding cover.
4. Connect the black jumper cable to the aux-iliary battery's negative (–) terminal andto the ground point in your vehicle's enginecompartment (right engine mount at thetop, on the outer screw) .
5. Start the engine in the assisting vehicle,then start the engine in the vehicle withdead battery.
6. After the engine has started, first removethe negative (–) terminal jumper cable(black). Then remove the positive (+) termi-nal jumper cable (red).
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
CAUTION
Connect the jumper cables carefully toavoid short circuits with other componentsin the engine compartment.
03 Your driving environment
Starting the engine
03
108
WARNING
• Do not connect the jumper cable to anypart of the fuel system or to any movingparts. Avoid touching hot manifolds.
• Batteries generate hydrogen gas, whichis flammable and explosive.
• Battery fluid contains sulfuric acid. Donot allow battery fluid to contact eyes,skin, fabrics or painted surfaces. If con-tact occurs, flush the affected areaimmediately with water. Obtain medicalhelp immediately if eyes are affected.
• Never expose the battery to open flameor electric spark.
• Do not smoke near the battery.
• Failure to follow the instructions forjump starting can lead to injury.
03 Your driving environment
Transmission
03
109
Automatic transmission
G02
1351
Shiftgate positions1
Depress the button on the front of the gearselector knob to move the gear selectorbetween the R, N, D, and P positions.
The gear selector can be moved freely betweenthe Geartronic (manual shifting) and Drive (D)positions while driving.
Park position (P)Select the P position when starting or parking.
KeylockTo remove the remote key from the ignitionslot, the gear selector must be in the P position.The remote key is locked in the slot in all otherpositions.
ShiftlockWhen P has been selected, the transmission ismechanically blocked in this position. Thebrake pedal must be depressed before thegear lever can be moved from the P position.
Always apply the parking brake when the vehi-cle is parked, see page 114. If the vehicle isequipped with the optional electric parkingbrake, press the control to apply the brake, seepage 114.
G02
1350
CAUTION
The vehicle must be stationary when posi-tion P is selected.
Reverse (R)The vehicle must be stationary when positionR is selected.
Neutral position (N)No gear is engaged and the engine can bestarted with the gear selector in this position.Apply the parking brake if the vehicle is sta-tionary with the gear selector in position N.
Drive (D)D is the normal driving position. The car auto-matically shifts between the various forwardgears, based on the level of acceleration andspeed. The car must be at a standstill whenshifting from position R to position D.
Geartronic–manual shiftingGeartronic allows you to manually shift amongyour vehicle's six forward speeds. Geartroniccan be selected at any time.
• To access the manual (M) shifting positionfrom Drive (D), move the gear selector tothe right to M (or to S on models equippedwith Sport mode).
1 The information display (see page 71) shows the gear selector's position or the selected gear by displaying the following: P, R, N, D, S, 1, 2, 3, 4, 5, or 6.
03 Your driving environment
Transmission
03
110
NOTE
On models equipped with Sport mode, thetransmission will not switch to manual shift-ing mode until the gear selector is movedforward or rearward. The selected gear willthen be shown in the information display(see page 71).
• To return to the D position from M or S,move the gear selector to the left.
While driving• If you select the M position while driving,
the gear that was being used in the Driveposition will also initially be selected in theM position.
• Move the gear selector forward (toward"+") to shift to a higher gear or rearward(toward "–") to shift to a lower gear.
• If you hold the gear selector toward "–", thetransmission will downshift one gear at atime and will utilize the braking power ofthe engine. If the current speed is too highfor using a lower gear, the downshift willnot occur until the speed has decreasedenough to allow the lower gear to be used.
• If you slow to a very low speed, the trans-mission will automatically shift down.
Shiftlock – Neutral (N)If the gear selector is in the N position and thevehicle has been stationary for at least 3 sec-onds (irrespective of whether the engine is run-ning) then the gear selector is locked.
To be able to move the gear selector from N toanother gear position, the brake pedal must bedepressed and the ignition must be in posi-tion II, see page 78.
Geartronic–starting on slippery surfacesSelecting 3rd gear in Geartronic’s manual shift-ing mode can help provide better traction whenstarting off on slippery surfaces. To do so:
1. Depress the brake pedal and move thegear selector to the right from the D posi-tion to M. The text in the instrument paneldisplay will change from D to 1.
2. Press the gear selector forward andrelease it (this selects 2nd gear). Press theselector forward again and release it toselect 3rd gear.
3. Release the brake pedal and press gentlyon the accelerator pedal.
Shiftlock override
G02
1352
If the vehicle cannot be driven, for examplebecause of a dead battery, the gear selectormust be moved from the P position so that thevehicle can be moved2.
Lift away the rubber mat on the floor of thestorage compartment behind the centerconsole and open the hatch.
Insert the key blade into the opening as faras possible. Press the key blade down andkeep it held down. Move the gear selectorfrom the P position. For information on thekey blade, see page 50.
2 If the battery is dead, the optional electric parking brake cannot be applied or released. Connect an auxiliary battery if the battery voltage is too low, see page 107.
03 Your driving environment
Transmission
03
111
All Wheel Drive – AWD3
Your Volvo can be equipped with permanentAll Wheel Drive, which means that power isdistributed automatically between the frontand rear wheels. Under normal driving condi-tions, most of the engine's power is directed tothe front wheels. However, if there is any ten-dency for the front wheels to spin, an electron-ically controlled coupling distributes power tothe wheels that have the best traction.
NOTE
The message AWD disabled Servicerequired will be appear in the informationdisplay if an electrical fault should occur inthe AWD system. A warning light will alsoilluminate in the instrument panel. If thisoccurs, have the system checked by atrained and qualified Volvo service techni-cian.
3 Standard on certain models.
03 Your driving environment
Brakes
03
112
Brake systemThe brake system is a hydraulic system con-sisting of two separate brake circuits. If a prob-lem should occur in one of these circuits, it isstill possible to stop the vehicle with the otherbrake circuit.
If the brake pedal must be depressed fartherthan normal and requires greater foot pressure,the stopping distance will be longer.
A warning light in the instrument panel will lightup to warn the driver that a fault has occurred.
If this light comes on while driving or braking,stop immediately and check the brake fluidlevel in the reservoir.
NOTE
Press the brake pedal hard and maintainpressure on the pedal – do not pump thebrakes.
WARNING
If the fluid level is below the MIN mark in thereservoir or if a brake system message isshown in the information display: DO NOTDRIVE. Have the vehicle towed to a trainedand qualified Volvo service technician andhave the brake system inspected.
Power brakes function only when theengine is runningThe power brakes utilize vacuum pressurewhich is only created when the engine is run-ning. Never let the vehicle roll to a stop with theengine switched off.
If the power brakes are not working, the brakepedal must be pressed approximately fivetimes harder than usual to make up for the lackof power assistance. This can happen forexample when towing your vehicle or if theengine is switched off when the vehicle is roll-ing. The brake pedal feels harder than usual.
Water on brake discs and brake padsaffects brakingDriving in rain and slush or passing through anautomatic car wash can cause water to collecton the brake discs and pads. This will cause adelay in braking effect when the pedal isdepressed. To avoid such a delay when thebrakes are needed, depress the pedal occa-sionally when driving through rain, slush, etc.This will remove the water from the brakes.Check that brake application feels normal. Thisshould also be done after washing or startingin very damp or cold weather.
Severe strain on the brake systemThe brakes will be subject to severe strainwhen driving in mountains or hilly areas, orwhen towing a trailer. Vehicle speed is usually
slower, which means that the cooling of thebrakes is less efficient than when driving onlevel roads. To reduce the strain on the brakes,shift into a lower gear and let the engine helpwith the braking. Do not forget that if you aretowing a trailer, the brakes will be subjected toa greater than normal load.
Anti-lock braking systemThe Anti-lock Braking System (ABS) helps toimprove vehicle control (stopping and steering)during severe braking conditions by limitingbrake lockup. When the system "senses"impending lockup, braking pressure is auto-matically modulated in order to help preventlockup that could lead to a skid.
The system performs a brief self-diagnostictest when the engine has been started anddriver releases the brake pedal. Another auto-matic test may be performed when the vehiclefirst reaches a speed of approximately 25 mph(40 km/h). The brake pedal will pulsate severaltimes and a sound may be audible from theABS control module. This is normal.
Cleaning the brake discsCoatings of dirt and water on the brake discsmay result in delayed brake function. This delayis minimized by cleaning the brake linings.
Cleaning the brake pads is advisable in wetweather, prior to long-term parking, and afterthe vehicle has been washed. Do this by brak-
03 Your driving environment
Brakes
03
113
ing gently for a short period while the vehicle ismoving.
Emergency Brake AssistanceEBA is designed to provide full brake effectimmediately in the event of sudden, hard brak-ing. The system is activated by the speed withwhich the brake pedal is depressed.
When the EBA system is activated, the brakepedal will go down and pressure in the brakesystem immediately increases to the maximumlevel. Maintain full pressure on the brake pedalin order to utilize the system completely. EBAis automatically deactivated when the brakepedal is released.
NOTE
• When the EBA system is activated, thebrake pedal will go down and pressurein the brake system immediately increa-ses to the maximum level. You mustmaintain full pressure on the brakepedal in order to utilize the system com-pletely. There will be no braking effect ifthe pedal is released. EBA is automati-cally deactivated when the brake pedalis released.
• When the vehicle has been parked forsome time, the brake pedal may sinkmore than usual when the engine isstarted. This is normal and the pedal willreturn to its usual position when it isreleased.
Symbols in the instrument panel
Symbol Specification
Steady glow – Check the brakefluid level. If the level is low, fillwith brake fluid and check forthe cause of the brake fluidloss.
Steady glow for two secondswhen the engine is started –There was a fault in the brakesystem's ABS function whenthe engine was last running.
WARNING
If and come on at the sametime and the brake level is below the MINmark in the reservoir or if a brake system-related message is shown in the informationdisplay: DO NOT DRIVE. Have the vehicletowed to a trained and qualified Volvo serv-ice technician and have the brake systeminspected.
03 Your driving environment
Parking brake
03
114
Electric parking brakeAn electric parking brake has the same func-tion as a manual parking brake.
NOTE
• A faint sound from the parking brake'selectric motor can be heard when theparking brake is being applied. Thissound can also be heard during theautomatic function check of the parkingbrake.
• The brake pedal will move slightly whenthe electric parking brake is applied orreleased.
Low battery voltageIf the battery voltage is too low, the parkingbrake cannot be applied or released. Connectan auxiliary battery if the battery voltage is toolow, see page 107.
Applying the electric parking brake
G02
1354
Parking brake control
1. Press firmly on the brake pedal.
2. Push the control.
3. Release the brake pedal and ensure thatthe vehicle is at a standstill.
4. When the vehicle is parked, the gear selec-tor must be in position P.
The symbol in the instrument panelflashes while the parking bake is being applied,and glows steadily when the parking brake hasbeen fully applied.
NOTE
• In an emergency the parking brake canbe applied when the vehicle is movingby holding in the control. Braking will beinterrupted when the accelerator pedalis depressed or the control is released.
• An audible signal will sound during thisprocedure if the vehicle is moving atspeeds above 6 mph (10 km/h).
Parking on a hill• If the vehicle is pointing uphill, turn the front
wheels so that they point away from thecurb.
• If the vehicle is pointing downhill, turn thefront wheels so that they point toward thecurb.
03 Your driving environment
Parking brake
03
115
Releasing the electric parking brake
G02
1359
Parking brake control
Manual release1. Fasten the seat belt.
2. Insert the remote key in the ignition slot.
3. Press firmly on the brake pedal.
4. Pull the parking brake control.
Vehicles with Keyless drive (option)1. Press the START/STOP ENGINE button.
2. Press firmly on the brake pedal.
3. Pull the parking brake control.
Automatic release1. Start the engine.
NOTE
• For safety reasons, the parking brake isonly released automatically if the engineis running and the driver is wearing a seatbelt.
• The electric parking brake will bereleased immediately when the acceler-ator pedal is pressed and the gear selec-tor is in position D or P.
2. Fasten the seat belt
3. Move the gear selector to position D or Rand press the accelerator pedal. The park-ing brake will release when the vehiclebegins to move.
Heavy load uphillA heavy load, such as a trailer, can cause thevehicle to roll backward when the parkingbrake is released automatically on a steepincline. To help avoid this:
1. Keep the electric parking brake leverpushed in with the left hand while shiftinginto Drive with the right.
2. While pressing the throttle pedal to pullaway, release the parking brake lever onlyafter the vehicle begins to move.
Symbols
Symbol Specification
Read the message in the infor-mation display
A flashing symbol indicates thatthe parking brake is beingapplied. If the symbol flashes inany other situation then thismeans that a fault has arisen.Read the message on the infor-mation display.
Messages
G01
6556
Parking brake not fully released – A fault ispreventing the parking brake from beingreleased. Contact an authorized Volvo work-
03 Your driving environment
Parking brake
03
116
shop. If you drive off with this error messageshowing, a warning signal sounds.
Parking brake not applied – A fault is pre-venting the parking brake from being applied.Try to apply and release. Contact a Volvo work-shop if the message remains.
Parking brake Service required – A fault hasarisen. Contact a Volvo workshop if the faultremains.
WARNING
If the vehicle must be parked before the faulthas been corrected, always put the gearselector in P and turn the wheels so thatthey point away from the curb if the vehicleis pointing uphill or toward the curb if it ispointing downhill.
03 Your driving environment
03
117
G020908
118
Menus and messages........................................................................... 120Climate system..................................................................................... 124Audio system........................................................................................ 131Bluetooth hands-free connection....................................................... 142Rear Seat Entertainment - Dual Screen (RSE)–option ......................... 148Trip computer........................................................................................ 151Compass............................................................................................... 152Stability system..................................................................................... 154Active chassis system–Four C.............................................................. 156Cruise control........................................................................................ 157Collision warning with Auto-brake (option)........................................... 159Adaptive Cruise Control–ACC (option)................................................. 165Distance alert ....................................................................................... 172Driver Alert System (option) ................................................................. 175Park assist (option)................................................................................ 180Blind Spot Information System (option)................................................ 183Passenger compartment convenience................................................. 187Passenger compartment convenience–S80 Executive ........................ 190
04COMFORT AND DRIVING PLEASURE
04 Comfort and driving pleasure
Menus and messages
04
120
Center consoleCertain functions are controlled from the cen-ter console via the menu system or from theoptional keypad in the steering wheel. Eachfunction is described under its respective sec-tion.
The current menu level is shown at the top rightof display in the center console.
Center console controls
G01
8378
Center console with information display and con-trols for menus
Navigation button – scrolls and selectsamong menu options
ENTER – selects menu options
MENU – accesses the menu system
EXIT – leads back one step in the menustructure. A long press exits the menu sys-tem.
Steering wheel keypad
G01
8379
ENTER
EXIT
Navigation buttons.
If the steering wheel keypad has ENTER andEXIT, the buttons to have the samefunction as those in the center console.
Search pathsAccess to some functions is provided directlyvia the function buttons and others are accessthrough the menu system.
Search paths to the menu system functions arelisted as follows: Car settings Locksettings, if the following steps have been takenfirst:
1. Press MENU.
2. Scroll to Menu and press ENTER.
3. Scroll to Submenu and press ENTER.
The navigation button can be used instead ofENTER and EXIT when navigating the menuhierarchy. The right arrow is equal to ENTERand the left arrow to EXIT.
The menu options are numbered and can alsobe selected directly with the numerical keypad(1 – 9 only).
Menu overview
NOTE
Menu selections will not be available (will be"grayed out") when the vehicle is moving.
Car key memory
Seat & mirror positions
Car settings
Fold mirr. when locking (option on cer-tain markets only)
Collision warning settings (option)
04 Comfort and driving pleasure
Menus and messages
04
121
Light settings
Lock settings
Reduced guard1
Parking camera settings (accessory)
Steering force level (option)
Information
Climate settings
Automatic blower adjust
Recirculation timer
Auto. rear defroster
Reset climate settings
Main menu AMAudio settings2
Sound stage
Equalizer, front
Equalizer, rear
Auto. volume control
Resets all audio settings.
Main menu FMFM settings
Radio text
Advanced radio settings
Audio settings
Main menu CDRandom
Off
Folder
Disc
Single disc
All discs
CD settings
Disc text (option)
Audio settings
Main menu AUXVolume, AUX input
Audio settings
Main instrument panel
G02
2908
Information display and menu controls
READ – access to the list of messages andmessage confirmation.
Thumbwheel – browse among menus andoptions in the list of functions.
RESET – reset the active function. Used incertain cases to select/activate a function,see the explanation under each respectivefunction.
The menus shown on the information displaysin the instrument panel are controlled with theleft lever. The menus shown depend on ignitionmode. Press READ to erase a message andreturn to the menus.
1 Certain models2 The menu option for audio settings is available in all audio sources.
04 Comfort and driving pleasure
Menus and messages
04
122
Menu overviewDriving distance on current fuel reserve
Average
Instantaneous:
Average speed
Current speed in mph (Canadian modelsonly)
DSTC
MessageG
0289
40
When a warning, information or indicator sym-bol comes on, a corresponding messageappears on the information display. An errormessage is stored in a memory list until thefault is rectified.
Press READ to acknowledge and scroll amongthe messages.
NOTE
If a warning message appears while you areusing the trip computer, the message mustbe read and confirmed by pressing READbefore the previous activity can beresumed.
Message Description
Stop safely Stop and switch offthe engine. Seriousrisk of damage.Contact an author-ized Volvo work-shop.
Stopping theengine
Stop and switch offthe engine. Seriousrisk of damage.Contact an author-ized Volvo work-shop.
Service urgent Have the vehiclechecked by anauthorized Volvoworkshop immedi-ately.
Message Description
Service required Have the vehiclechecked by anauthorized Volvoworkshop as soonas possible.
See manual Read the owner'smanual.
Book time formaintenance
Time to book serviceat an authorizedVolvo retailer.
Time for regularmaintenance
Time for regularservice at an author-ized Volvo work-shop. The timing isdetermined by thenumber of milesdriven, number ofmonths since thelast service, enginerunning time.
04 Comfort and driving pleasure
Menus and messages
04
123
Message Description
Maintenance over-due
If the service inter-vals are not fol-lowed, the warrantydoes not cover anydamaged parts.Contact an author-ized Volvo workshopfor service.
Temporarily OFF A function has beentemporarilyswitched off and isreset automaticallywhile driving or afterstarting again.
Power save mode The audio system isswitched off to savecurrent. Charge thebattery.
04 Comfort and driving pleasure
Climate system
04
124
Introduction
Air conditioningThe vehicle is equipped with Electronic ClimateControl (ECC). The climate control systemcools, heats or dehumidifies the air in the pas-senger compartment.
NOTE
• The air conditioning can be switchedoff, but to ensure the best possible cli-mate comfort in the passenger com-partment and to prevent the windowsfrom misting, it should always be on.
• In warm weather, a small amount ofwater may accumulate under the carwhen it has been parked. This water iscondensation from the A/C system andis normal.
Sensor location• The sunlight sensor is located on the top
side of the dashboard.
NOTE
The sunlight sensor monitors which side ofthe car that is most exposed to sunlight.This can mean that the temperature maydiffer between the right and left-side airvents, even if the temperatures set for bothsides of the passenger compartment are thesame.
• The temperature sensor for the passengercompartment is located below the climatecontrol panel.
• The outside temperature sensor is locatedon the door mirror.
• The humidity sensor (option) is located inthe interior rearview mirror.
NOTE
Do not cover or block the sensors withclothing or other objects.
Side windows and moonroofTo ensure that the air conditioning works opti-mally, the side windows, and the optionalmoonroof should be closed.
Fog on the inside of the windowsThe defroster function should be used toremove fog or mist from the inside of the win-dows. Keeping the windows clean with a com-
mercially available window washing spray willalso help prevent fogging or misting.
Vents in the parcel shelf
NOTE
The air vents at the rear of the parcel shelfshould never be obstructed.
Temporary shut-off of the airconditioningThe air conditioning is momentarily disen-gaged during full-throttle acceleration or whendriving uphill with a trailer. This may result in atemporary increase in cabin temperature.
Ice and snowAlways keep the air intake grille at the base ofthe windshield free of snow.
Climate system maintenanceSpecial tools and equipment are required tomaintain and carry out repairs on the climatesystem. Work of this type should only be doneby a trained and qualified Volvo service tech-nician.
RefrigerantVolvo cares about the environment. The airconditioning system in your car contains aCFC-free refrigerant – R134a. This substancewill not deplete the ozone layer. The air condi-
04 Comfort and driving pleasure
Climate system
04
125
tioning system contains 1.8 lbs (800 g) ofR134a. The systems uses PAG oil.
Passenger compartment filterReplace the cabin air filter with a new one atthe recommended intervals. Please refer toyour Warranty and Service Records Informa-tion booklet, or consult a trained and qualifiedVolvo service technician for these intervals.The filter should be replaced more often whendriving under dirty and dusty conditions. Thefilter cannot be cleaned and therefore shouldalways be replaced with a new one.
NOTE
There are different types of cabin air filters.Ensure that the correct type is installed.
Interior Air Quality System (IAQS)A multifilter helps reduce gases and particlesin the incoming air, thereby reducing the levelsof odors and contaminants entering the vehi-cle. The air quality sensor detects increasedlevels of contaminants in the outside air. Whenthe air quality sensor detects contaminatedoutside air, the air intake closes and the airinside the passenger compartment is recircu-lated, i.e. no outside air enters the vehicle. Thefilter also cleans recirculated passenger com-partment air.
NOTE
Contact your Volvo retailer for IAQS air filterreplacement intervals.
Menu settingsThe default settings for three of the climatesystem's functions can be changed in themenu system, see page 120:
• Blower speed in automatic mode, seepage 127.
• Recirculation timer for passenger com-partment air, see page 127.
• Automatic rear window defrosting, seepage 99.
The functions can also be returned to factorysettings in the menu system.
Air distribution
G02
1366
The incoming air is distributed from 20 differentvents in the passenger compartment.
Air distribution is fully automatic in AUTOmode.
If desired, air distribution can be controlledmanually, see page 130.
04 Comfort and driving pleasure
Climate system
04
126
Air vents in the dashboard
G02
1367
Open
Closed
Horizontal airflow
Vertical airflow
Direct the outer air vents toward the side win-dows to defrost.
Air vents in the door pillars
G02
1368
Open
Closed
Horizontal airflow
Vertical airflow
Direct the outer air vents toward the side win-dows to defrost.
Direct the vents into the passenger compart-ment to maintain a comfortable climate in therear seat.
Electronic climate control, ECC
G01
8599
Ventilated front driver's seat (option)
Blower
Heated front driver's seat (option)
Air distribution
Ventilated front passenger's seat (option)
Auto
Heated front passenger's seat (option)
Temperature control, passenger's side
A/C – On/Off
Heated rear window and door mirrors, seepage 99.
Defroster (maximum effect)
04 Comfort and driving pleasure
Climate system
04
127
Recirculation/Air quality system
Temperature control, driver's side
Ventilated front seats (option)The ventilation system consists of fans in theseats and backrests that draw air through theseat upholstery. The cooling effect increasesas the air in the passenger compartmentbecomes cooler.
The ventilation is controlled by the ECC sys-tem, which takes into account the seat tem-perature, sunlight in the passenger compart-ment, and the ambient temperature.
The ventilation can be used at the same timeas seat heating.
The ventilation system can be activated whenthe engine is running. There are three comfortlevels that produce different cooling and dehu-midification effects:
• Level three: press the button once formaximum output – three indicator lightscome on.
• Level two: press the button twice for alower output – two indicator lights comeon.
• Level one: press the button three times forthe lowest output – one indicator lightcomes on.
• Press the button a fourth time to switch offthe function – the indicator light will go out.
Blower controlTurn the control clockwise toincrease or counterclockwiseto decrease the blowerspeed. Pressing the AUTOswitch will automatically reg-ulate blower speed and over-ride manual adjustment.
NOTE
If the blower is turned off completely, the airconditioning is disengaged, which mayresult in fogging on the windows.
Heated front seats (option)Press the button once for thehighest heat level – three indi-cator lights come on.
Press the button twice for alower heat level – two indica-tor lights come on.
Press the button three times for the lowest heatlevel – one indicator light comes on.
Press the button four times to switch off theheat – no indicator lights come on.
Heated rear seats1
G02
1376
Heat control for the outboard seating positionstakes place in the same way as for the frontseat.
Air distributionThe figure consists of threebuttons. When the buttonsare pressed, an indicator lightin front of the respective partof the figure illuminates andshows which air distribution isselected, see page 130.
1 Standard on the S80 Executive, option on Canadian models only.
04 Comfort and driving pleasure
Climate system
04
128
AutoThe function automaticallyregulates cooling, heating,blower speed, recirculation,and air distribution to main-tain the chosen temperature.If you select one or more man-ual functions, the other func-
tions continue to be controlled automatically.The air quality sensor is engaged and all man-ual settings are switched off when AUTO ispressed. The display shows AUTOCLIMATE.
Blower speed in automatic mode can be setunder Climate settings Automatic bloweradjust. Choose between Low, Normal orHigh.
NOTE
Selecting the lowest blower speed mayincreases the risk of fog forming on the win-dows.
For a description of the menu system, seepage 120.
Temperature controlThe temperatures on thedriver and passenger sidescan be set independently.When the vehicle is started,the most recent setting isresumed.
NOTE
Heating or cooling cannot be speeded up byselecting a higher/lower temperature thanthe actual temperature required.
A/C – ON/OFFThe air conditioning is con-trolled automatically by thesystem when the ON light ison. This cools/heats anddehumidifies the incoming air.When the OFF light is on, theair conditioning is always dis-
engaged. Other functions are still controlledautomatically. When defroster is selected, theair conditioning system is set for maximumblower speed and dehumidification.
DefrosterThis function defrosts/de-icesthe windshield and front sidewindows. The indicator lightin the defroster button lightswhen the function is active.
• Blower speed increases automatically andthe air conditioning will switch on (if notalready on and if the passenger compart-ment blower is not turned off) to dehumid-ify the air in the passenger compartment.Air conditioning can be switched off bypressing the AC button.
• Recirculation will not function while defrostis engaged.
The climate system will return to its previoussettings when the defroster function isswitched off.
04 Comfort and driving pleasure
Climate system
04
129
Recirculation/air quality system
RecirculationThis function can be used toshut out exhaust fumes,smoke, etc from the passen-ger compartment. The air inthe passenger compartmentis then recirculated, i.e., no airfrom outside the car is taken
into the car when this function is activated. Theindicator light in the button will illuminate whenrecirculation is selected.
If the air in the car recirculates for too long,there is a risk of condensation forming on theinsides of the windows, especially in winter.
TimerThe timer function minimizes the risk of fog-ging, or stale air when the recirculation functionis selected by automatically switching off thefunction after a certain length of time, depend-ing on the ambient temperature. Activate/deactivate the function under Climate controlsettings Recirculation timer. For adescription of the menu system, seepage 120.
NOTE
When Defroster is selected, recirculation isalways deactivated.
Interior Air Quality System–IAQS (option)This system consists of a mul-tifilter and an air quality sen-sor. The filter helps removegases and particles from theincoming air, thereby reduc-ing the amounts of odors andcontaminants entering the
vehicle. The air quality sensor detectsincreased levels of contaminants in the outsideair. When the air quality sensor detects conta-minated outside air, the air intake closes andthe air inside the passenger compartment isrecirculated, i.e., no outside air enters the vehi-cle. The filter also cleans recirculated passen-ger compartment air. When the AUTO buttonis depressed the air quality sensor is alwaysengaged.
Activating the air quality sensorSwitch between the threefunctions by pressing the but-ton repeatedly.
• The left orange light comes on – the airquality sensor is disengaged.
• The center green light comes on – recircu-lation not engaged, providing it is notrequired for cooling in hot weather.
• The right orange light comes on – recircu-lation is engaged.
NOTE
• The air quality sensor should always beengaged in order to obtain the best airin the passenger compartment.
• Recirculation is limited in cold weatherto avoid fogging.
• If the insides of the windows start fog-ging, disengage the air quality sensor.Use the defroster function to increaseairflow to the front, side, and rear win-dows.
04 Comfort and driving pleasure
Climate system
04
130
Air distribution table
Air distribution Use Air distribution Use
Air to windows. Some airflows from the dashboardair vents. The air is notrecirculated. Air condition-ing is always engaged.
To remove de-fog/de-ice the front side win-dows and windshieldquickly.
Air to the floor and windows.Some air flows from thedashboard air vents.
To ensure comfortableconditions and good de-fogging in cold or humidweather.
Air to windshield and sidewindows. Some air flowsfrom the air dashboardvents.
In cold or humidweather (blowerspeed should bemoderate to high).
Air to floor and from dash-board air vents.
In sunny weather withcool outside tempera-tures.
Airflow to windows andfrom dashboard air vents.
To ensure good com-fort in warm, dryweather.
Air to floor. Some air flows tothe dashboard air vents andwindows.
To warm or cool the feet.
Airflow to the head andchest from the dashboardair vents.
To ensure efficientcooling in warmweather.
Airflow to windows, fromdashboard air vents and tothe floor.
To cool the feet or pro-vide warmer air to theupper body in coldweather or hot, dryweather.
04 Comfort and driving pleasure
Audio system
04
131
IntroductionThe audio system is available in two versions:High Performance och Premium Sound. Thesystem version is shown in the display whenthe audio system is switched on.
If the audio system is on when the ignition isswitched off, it will come on automatically thenext time the ignition is put in mode I or higher.The audio system can be operated without akey in the ignition slot for 15 minutes at a timeby pressing the POWER button (the driver'sdoor must be closed on vehicles with theoptional keyless drive).
Some functions are controlled from the menusystem in the center console. For more infor-mation on menus, see page 120.
Dolby Surround Pro Logic II and the sym-bol are trademarks of Dolby LaboratoriesLicensing Corporation. The Dolby SurroundPro Logic II System is manufactured underlicense from Dolby Laboratories Licensing Cor-poration.
Overview
G02
1398
Socket for external audio source (AUX,USB, iPod) - option
Steering wheel keypad
Center console control panel
Control panel with headphones socket(option)
Steering wheel keypad
G02
1399
Confirm selection in menu system andcontrols for a bluetooth-connected cellphone (see page 142).
Go higher in the menu system. Interruptcurrent function.
Volume
A short press scrolls between CD tracks orpreset radio stations. A long presssearches within CD tracks or searches forradio stations automatically.
04 Comfort and driving pleasure
Audio system
04
132
USB/iPod connector (option)An auxiliary device, such as an iPod, MP3player or a USB flash drive can be connectedto the audio system via the connector in thecenter console storage compartment. A stand-ard cable from an iPod or MP3 player can berouted under the cover to the AUX connectorin the storage compartment.
A sound source must be chosen, depending onthe device that has been connected:
1. Use MODE to select iPod or USB. The textCONNECT DEVICE will be displayed.
2. Connect the device to the connector in thecenter console storage compartment (seethe illustration).
The text LOADING will be displayed while thesystem loads the files (folder structure) on thedevice. This may take a short time.
When information about the files (the folderstructure) on the device has been loaded, theresulting list includes information on the artist,genre and song title.
To navigate in the folder structure, pressENTER and scroll up and down the foldersusing the arrow buttons (on the audio systemcontrol panel or on the steering wheel keypad).Press the right arrow button to select a folder.Press the left arrow button to go up a level in
the folder structure. Press ENTER to go downa level in the folder structure.
Tracks can be selected in two ways:
• Turn the Tuning knob clockwise or coun-terclockwise
• Use the right or left arrow keys on the nav-igation control to select the desired track.The arrow keys on the steering wheel key-pad can also be used in the same way.
NOTE
The system supports playback of files in themost common versions of formats such asmp3, wma, and wav. However, there may beversions of these formats that the systemdoes not support.
USB flash driveTo simplify the use of a USB flash drive, it isadvisable to only store music files on the drive.It will take considerably longer for the systemto index the files on the drive if it contains any-thing other than compatible music files.
MP3 playerMany mp3 players have a file indexing systemthat is not supported by the vehicle's audiosystem. In order to use an mp3 player, the sys-tem must be set to USB Removable device/Mass Storage Device.
iPodAn iPod receives current and its battery ischarged through the connecting cord. How-ever, if the iPod's battery is completelydrained, it should be recharged before the iPodis connected to the audio system.
NOTE
When an iPOD is used as a sound source,the vehicle's audio system has a menustructure similar to the one in the iPOD. Seethe iPOD's manual for detailed information.
For further information, refer to the accessorymanual USB/iPod Music Interface.
Rear control panel with headphonessocket (option)Headphones with an impedance of16 – 32 ohm and sensitivity of 102 dB or higherare recommended for best sound reproduc-tion.
04 Comfort and driving pleasure
Audio system
04
133
G02
1400
Volume
Scroll/search forward and backward
Audio source, activating
Headphones sockets (3.5 mm) – accessory
Activating/deactivatingThe control panel is activated by pressingMODE when the audio system is switched on.It is switched off automatically when the audiosystem is switched off or by a long press onMODE.
Scroll/search forward and backwardShort presses on (2) are used to scroll betweenCD tracks or preset radio stations. Longpresses are used to fast-wind CD tracks or tosearch for radio stations automatically.
LimitationsThe audio source (FM, AM, CD, etc.) beingplayed in the speakers cannot be controlledfrom the rear control panel.
Menu control and MY KEYCertain functions can be controlled from themenu system in the center console. For moreinformation on menus, see page 120.
Storing your favorite functions with MYKEY
G01
8381
1. Select the function in the menu to bestored. Only certain functions can bestored.
2. Press and hold MY KEY for more than twoseconds.
Activate the stored function by pressing MYKEY briefly.
The following functions can be pro-grammed using MY KEY:
FM
Radio text on/off
Audio settings
Sound stage (front/driver/rear)
Auto. volume control (off/low/medium/high)
Sirius satellite radio (option)
Add song to memory
Direct channel entry
Song seek (on/off)
Sirius settings – Song memory (showmemory list)
CD/CD changer
Random (CD changer)
Disc text (on/off)
Track information (on/off)
Car settings
Fold mirror when locking
04 Comfort and driving pleasure
Audio system
04
134
Audio functions
G01
8382
Center console, controls for audio functions
Internal audio sources: AM, FM and CD
External audio source. For connection, seepage 131
Push button and knob controls for makingsound settings
Navigation button
Volume and on/off
Audio volume and automatic volumecontrolThe audio system compensates for disruptingnoises in the passenger compartment byincreasing the volume according to the speed
of the vehicle. The level of sound compensa-tion can be set at low, medium or high. Selectthe level under Audio settings Autovolume control.
External audio source audio volumeExternal devices such as an MP3 player can beconnected to the AUX input, see page 131. Thevolume of the external sound source AUX maybe different from the volume of the internalsound sources such as the CD player or theradio. If the external sound source's volume istoo high, the quality of the sound may beimpaired. To help prevent this, adjust the inputvolume of the external audio source:
1. Set the audio system in AUX mode usingMODE and use (4) to navigate to Volume,AUX input.
2. Turn the control (3) or press / the nav-igation button.
Sound settingsPress the control (3) repeatedly to togglesamong the sound settings. Adjustments aremade by turning the control (3).
• Bass – Bass level.
• Treble – Treble level.
• Fader – Balance between the front andrear speakers.
• Balance – Balance between the right andleft speakers.
• Subwoofer (option on certain marketsonly) – Level for the bass speaker. The sub-woofer can be switched off by turning con-trol (3) counterclockwise to MIN.
• Surround (option) – Surround settings.
Under Surround, 3 channel stereo or DolbySurround Pro logic II can be activated byselecting 3-ch or Dpl2 respectively. This ena-bles the following options:
• Center level1 – Level for the centerspeaker.
• Surround level1 – Level for surroundsound.
EqualizerSound levels for different frequencies can beadjusted separately using the equalizer2.
1. Go to Audio settings and selectEqualizer Front or Equalizer Rear.
The sound level for the frequency isadjusted with / on the navigation but-ton. Press / to select another fre-quency.
1 Premium Sound2 Certain audio systems
04 Comfort and driving pleasure
Audio system
04
135
2. Use ENTER to save or EXIT to close.
Sound stage3
The sound experience can be optimized for thedriver's seat, both front seats or the rear seat.Select one of the options underAudio settings Soundstage.
Optimal sound reproductionThe audio system is calibrated for optimalsound reproduction using digital signal pro-cessing.
This calibration takes into account factors suchas the speakers, amplifier, cabin acoustics, thelisteners' seating positions, etc., for each com-bination of vehicle/audio system.
There is also a dynamic calibration that takesinto consideration the volume level, radioreception, and the speed of the vehicle.
The settings that are described in this manual,such as Bass, Treble, and Equalizer are onlyintended to enable the user to adapt soundreproduction to his/her personal tastes.
CD functions
G01
8383
Center console, controls for CD functions
CD insert and eject
CD slot
Navigation button for changing CD tracks
Fast-back and change CD track
CD changer position selection (option)
Scan CD
Playing a CD (CD player4)If a music CD is in the player when CD ispressed, it will be played automatically. Other-wise, insert a disc and press CD.
Playing a CD (CD changer)If a CD position with a music CD is alreadyselected when CD is pressed, it will be playedautomatically. Otherwise select a disc with thenumber buttons 1 – 6 or / on the naviga-tion button.
Insert a CD (CD changer)1. Select an empty position with the number
buttons 1 – 6 or / on the navigationbutton.> An empty position is marked on the dis-
play. The text Insert disc shows that anew disc can be inserted. The CDchanger can hold up to six CDs.
2. Insert a CD in the CD changer slot.
Disc ejectFor reasons of traffic safety, an ejected CDmust be removed within 12 seconds or it willbe automatically drawn back into the slot andthe CD player will enter pause mode. Press theCD button to restart the disc.
Eject individual discs by pressing the eject but-ton.
3 Certain markets only.4 Certain markets only.
04 Comfort and driving pleasure
Audio system
04
136
Eject all discs with a long press on the ejectbutton. The entire magazine is emptied disc bydisc.
NOTE
The Eject all function can only be used whilethe vehicle is at a standstill and will be can-celled if the vehicle begins to move.
PauseWhen the audio system volume is turned offcompletely, the CD player will pause and willresume playing when the volume is turned upagain.
Sound filesIn addition to playing normal music CDs, theCD player/changer can also play discs con-taining files in mp3 or wma format.
NOTE
Some copy protected sound files may notbe read by the player.
When a CD containing sound files is insertedinto the player the disc's directory structure isscanned before the CD begins playing. Thelength of time that this takes depends on thequality of the disc.
Navigating the disc and playing tracksIf a disc containing sound files is inside the CDplayer, press ENTER to display the disc'sdirectory structure. The directory structure isnavigated in the same way as the audio sys-tem's menu structure. Sound files have the
symbol and directories have the symbol. Press ENTER to play a selected folderor a file.
When the music file has been played, theplayer will continue to play the rest of the filesin the current folder. When all of the files in thefolder have been played, the player will auto-matically go to the next folder and play the filesin it.
Fast-forward/change CD tracks andsound filesShort presses / on the navigation buttonare used to scroll between CD tracks/soundfiles. Long presses are used to search withinCD tracks/sound files. TUNING (or the steeringwheel keypad) can also be used for this pur-pose.
Scan CDThis function plays the first ten seconds ofeach CD track/sound file. Press SCAN to acti-vate. Interrupt with EXIT or SCAN to continueplaying the current CD track/sound file.
RandomThis function plays the tracks in random order(shuffle). The random CD tracks/sound filescan be scrolled through in the normal way.
NOTE
It is only possible to scroll between randomCD tracks on the current disc.
Different messages are displayed dependingon which random function has been selected:
• RANDOM means that the tracks from onlyone music CD are played
• RND ALL means that all tracks on allmusic CDs in the optional CD changer areplayed.
• RANDOM FOLDER means that the soundfiles in a directory on the current CD areplayed.
CD playerIf a normal music CD is being played, activate/deactivate under Random.
If a disc with sound files is being played, acti-vate/deactivate under Random Folder.
CD changerIf a normal music CD is being played underRandom Single disc or Random All
04 Comfort and driving pleasure
Audio system
04
137
discs. The option All discs only applies to themusic CDs in the changer.
If a CD with sound files is being played, acti-vate/deactivate instead under RandomFolder. If you select another CD the function isdeactivated.
Disc textIf title information is stored on a music CD it canbe shown on the display5. Activate/deactivatein CD mode under CD settings Disc text.
Radio functions
G01
8384
Center console, controls for radio functions
Navigation button for automatic tuning
Press to cancel a menu selection or aselected function
Manual tuning
Scan the current wave band
Auto store the strongest radio stations inthe area in which you are driving
Station preset buttons
Select wave band AM and FM (FM1 andFM2)
Automatic tuning1. Select a wave band using FM or AM.
2. Press / on the navigation button.
Manual tuning1. Select a wave band using FM or AM.
2. Turn TUNING to select a station.
PresetTen station presets can be stored for eachwave band. FM has two memories for presets:FM1 and FM2. Only radio stations playedthrough the car's speakers can be stored aspresets. The stored presets are selected usingthe preset buttons.
Preset storage can be carried out manually orautomatically.
Manually storing preset stations1. Tune into a station.
2. Hold in one of the preset buttons until themessage Channel stored appears on thedisplay.
Automatically storing preset stationsThe function is especially useful in areas wherethe radio stations and their frequencies areunfamiliar. The ten strongest radio stations arestored automatically in a separate memory.
5 Only applies to the CD changer.
04 Comfort and driving pleasure
Audio system
04
138
1. Select a wave band using FM or AM.
2. Hold in AUTO until Autostoring…appears on the display.
Once Autostoring… disappears from the dis-play, the stations are stored. The radio contin-ues in Auto mode and Auto appears on thedisplay. The automatically stored presets cannow be selected using the preset buttons.Automatic preset storage can be cancelledusing EXIT.
Auto mode is cancelled by pressing for exam-ple AUTO or FM.
Returning to Auto mode provides access to theautostored presets:
1. Press AUTO.> Auto appears on the display.
2. Press a preset button.
ScanThe function automatically searches the cur-rent wave band for strong stations. When astation is found, it is played for approx. eightseconds before scanning is resumed. Whilethe station is playing it can be stored as a pre-set as usual.
1. Select a wave band using AM or FM.
2. Press SCAN.
> SCAN appears on the display. Closeusing SCAN or EXIT.
Radio textSome stations transmit information on pro-gram content, artists, etc. This information canbe shown on the display.
Activate/deactivate in FM mode under Radiotext.
Sirius satellite radio (option)
Listening to satellite radioThe Sirius satellite system consists of a numberof high elevation satellites in geosynchronousorbit.
NOTE
• The digital signals from the Sirius satel-lites are line-of-sight, which means thatphysical obstructions such as bridges,tunnels, etc, may temporarily interferewith signal reception.
• Avoid any obstructions, such as metal-lic objects transported on roof racks orin a ski box, or other antennas that mayimpede signals from the SIRIUS satel-lites.
Selecting Sirius radio mode1. Press Power to switch on the audio sys-
tem (see page 134 and see page 137 forinformation on the standard audio andradio functions).
2. Press the MODE button repeatedly untilSirius 1 or 2 is displayed.
Activating Sirius radio1. Tune to a satellite channel that has no
audio, which means that the channel isunsubscribed and the text "Call 888-539-SIRIUS TO SUBSCRIBE" is displayed (seealso "Selecting a channel".
2. Call Sirius at 1-888-539-SIRIUS (7474).
3. When asked for the Sirius ID number pressAUTO to display this number. It is alsopossible to retrieve the Sirius ID from themenu.
4. UPDATING SUBSCRIPTION will be dis-played while the subscription is beingupdated, after which the display will returnto the normal view.
SIRIUS IDThe SIRIUS ID is required when contacting theSirius Call Center. It is used to activate youraccount and when making any account trans-actions. The SIRIUS ID is sometimes referredto as the Electronic Serial Number (ESN).
04 Comfort and driving pleasure
Audio system
04
139
Selecting a channel category1. Select Sirius radio mode as described
above.
2. Press ENTER.
3. Use the up/down arrow keys to scrollthrough the list of categories.
4. Press ENTER or the right arrow key toselect a category.> The first channel in the selected cate-
gory will then be played.
NOTE
• The category ALL is default, which ena-bles you to scroll through the entire listof available satellite channels.
• The channel categories are automati-cally updated several times a year. Thistakes approximately two minutes andwill interrupt normal broadcasting. Amessage will be displayed while updat-ing is in progress. Information on chan-nel or feature updates is available atwww.sirius.com.
Selecting a channelThere are three ways of tuning in a channel:
• Using the left and right arrow keys
• By turning the tuning control
• Through direct channel entry.
NOTE
• The numbers of skipped or lockedchannels will not be displayed.
• If a channel is locked, the access codemust be entered before the channel canbe selected. See "Unlocking a channel"on page 141.
Direct channel entryThe Sirius satellite channels are in numericalorder throughout all of the categories. Toaccess a channel directly:
1. Press MENU and scroll to Direct channelentry.
2. Use the numerical keypad to enter thechannel's number.
3. Press ENTER. The radio will tune to thischannel, even if it belongs to a categoryother than the currently selected one.
ScanningSCAN automatically searches through the listof satellite channels. The search will only becarried out in the selected category, seepage 137 for more detailed information.
Storing a channelA total of 20 satellite channels can be stored;10 channels each for Sirius 1 and 2, seepage 137 for detailed information on storingchannels.
• A long press on one of the number keysstores the currently tuned channel on thatkey.
• A short press on a number key while theradio is in Sirius 1or 2 mode will tune to thepreset satellite channel stored on that but-ton, regardless of the currently selectedchannel category.
Song Seek and Song MemoryThe Song Seek and Song Memory functionsprovide both audio and visual notification whenSirius is broadcasting your favorite songs.Song Seek enables you to store the name ofthe song for future advance notification whenthat song is being played. The Song Memoryfeature makes it possible to view all of the cur-rent songs that are stored in memory.
Song memoryUp to ten songs can be saved in the system'smemory.
1. Press MENU.
2. Scroll to Add song to song mem. andfollow the instructions shown in the dis-play.
04 Comfort and driving pleasure
Audio system
04
140
If a new song is selected when the memory isfull, you will be prompted to press ENTER todelete the last song on the list.
NOTE
The remaining songs in the list will movedown one position, and the newly addedsong will be placed at the top of the list.
Song seekWhen a satellite radio channel plays one of thesongs stored in the song memory, the listenerwill be alerted by a text message and an audi-ble signal.
Press ENTER to listen to the song or EXIT tocancel.
To activate/deactivate the song seek function:
1. Press MENU
2. Scroll to Song seek
3. Press ENTER to activate or deactivate thefunction.
NOTE
When the song has ended, the radio willremain tuned to the channel on which thesong was played.
Radio textThe text that is displayed about the song thatis currently playing can be changed. Use theAUTO button or the menu to display the Artist,Title, Composer, or switch radio text off.
Advanced settingsThis menu function enables you to make set-tings on certain Sirius satellite radio functions.To access this menu:
1. Press MENU.
2. Scroll to the Sirius menu.
3. Select Advanced Sirius settings.
WARNING
Settings should be made when the vehicleis at a standstill.
The following settings can be made in the Sir-ius menu:
• The list of saved songs can be displayed
• Channel skip settings can be made
• Channel lock settings can be made
• The channel access code can be displayedor changed
• Your Sirius ID can be displayed
Skip optionsThis function is used to remove a channel fromthe list of available channels.
Skipping a channel1. Select CHANNEL SKIP LIST and press
ENTER.
2. Select a category in the list and pressENTER.
3. Skip channels in the list presented bypressing ENTER or right arrow key.
Unskip all channelsThis permanently removes all channels fromthe skip list and makes them available forselection.
Temp. unskip all ch.This function will temporarily unskip all chan-nels and make them available for selection. Thechannels remain on the skip list and will againbe skipped the next time the ignition isswitched on.
Channel lockAccess to specific channels can be restricted(locked). A locked channel will not provideaudio, song titles, or artist information.
NOTE
All channels are initially unlocked.
04 Comfort and driving pleasure
Audio system
04
141
Locking a channel:1. Select Sirius ID in the menu and select
LOCK OPTIONS and press ENTER.
2. Select CHANNEL LOCK LIST and pressENTER
3. Enter the channel access code6 and pressENTER.
4. Select a category in the list and pressENTER.
5. Lock channels in the list presented bypressing ENTER or right arrow.
The channel is now locked and a checked boxwill be displayed to indicate this. It will be nec-essary to enter the channel access code6 inorder to listen to a locked channel.
Unlocking a channelA channel's access code6 is required to unlocka channel.
Unlock all channelsThis permanently removes all channels fromthe locked list and makes them available forselection.
Temp. unlock all ch.This function will temporarily unlock all chan-nels and make them available for selection. Thechannels remain on the locked list and will
again be locked the next time the ignition isswitched on.
CHANGE CODEThis function makes it possible to change thechannel access code. The default code is0000.
To change the code:
1. Select CHANGE CODE and pressENTER.
2. Enter the current code and press ENTER.
3. Enter the new code and press ENTER.
4. Confirm the new code and press ENTER.
If an incorrect code is entered, the textWRONG CODE! is displayed.
If you have forgotten the access code:1. Select SIRIUS ID in the Sirius settings
menu and press ENTER.
2. Press and hold the ENTER button for2 seconds.
3. The current code will be displayed.
Your Volvo retailer can also provide you withassistance.
SIRIUS IDThis function displays the 12-digit Sirius acti-vation ID.
6 The default code is 0000. If you have changed the code and forgotten it, see the section "If you have forgotten the access code."
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
142
Introduction
G02
1443
System overview
Cell phone
Location of the microphone
Steering wheel keypad
Center console control panel and display
Bluetooth hands-freeThis option makes it possible to set up a wire-less connection between a Bluetooth-enabledcell phone and the vehicle’s audio system. Thisenables the audio system to function as ahands-free connection and allows you toremote-control a number of the phone’s func-tions. The microphone used by this system islocated in the ceiling console (2). The buttonsand other controls on the cell phone can
always be used regardless of whether or notthe phone is connected to the hands-free sys-tem.
NOTE
Not all cell phones are fully compatible withthe hands-free system. A list of compatiblephones is available at your Volvo retailer orat www.volvocars.us
WARNING
Never use the hands-free feature or anyother device in your vehicle in a way thatdistracts you from the task of driving safely.Distraction can lead to a serious accident.
Bluetooth functions in the centerconsole control panel
G02
1444
VOLUME – This function is also availableon the steering wheel keypad.
Keys containing letters and numbers fordialing numbers, adding phone bookentries, etc.
PHONE – Press to activate/deactivate theBluetooth function
Navigation buttons
EXIT – Press to end or defer calls, erasecharacters that have been entered, end anongoing function. This function is alsoavailable on the steering wheel keypad.
ENTER – Answer a call. Press once to dis-play the most recently dialed number. This
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
143
function is also available on the steeringwheel keypad.
Getting startedUse the controls on steering wheel keypad (3)and in the center console (4) to access, navi-gate and make selections in the hands-freesystem’s menus (see page 147).
Activating/deactivatingA short press on the PHONE button in the cen-ter console activates the hands-free system.The text TELEPHONE will appear at the top ofthe display to indicate that the audio system isin telephone mode.
The symbol indicates that the hands-freesystem is active.
A long press on the PHONE button deactivatesthe hands-free system and disconnects thecell phone.
Connecting cell phonesThe procedure for connecting a cell phone var-ies, depending on the phone itself, and onwhether or not the phone has been previouslyconnected.
If this is the first time the phone is to be con-nected to the hands-free system, proceed asfollows:
Alternative 1–using the vehicle's menus
1. Activate the cell phone’s Bluetooth func-tion (refer to the phone’s owner’s manual ifnecessary) or go to www.volvocars.com
2. Activate the vehicle’s Bluetooth hands-free system by briefly pressing thePHONE button.> Add phone will be displayed. If one or
more cell phones are already registeredin the system, they will also be dis-played.
3. Select Add phone.> The audio system will search for cell
phones that are in range. This searchtakes approximately 30 seconds. Anyphones detected will be displayed withtheir Bluetooth names. The hands-freesystem’s Bluetooth name will appearin the cell phone’s display as My Car.
4. Select one of the cell phones shown in theaudio system’s (center console) display.
5. Using the cell phone’s keypad, enter thedigits shown in the audio system’s display.
Alternative 2–using the cell phone’s menus
1. Activate the hands-free system by brieflypressing the PHONE button in the centerconsole. If there is a cell phone connected,disconnect it from the hands-free system
(by pressing PHONE in the center consolefor several seconds).
2. Perform a search using the cell phone’sBluetooth function (consult the cellphone’s owner’s manual if necessary).
3. Select My Car in the list of devices shownin the cell phone’s display.
4. When prompted, enter the PIN code 1234in the cell phone.
5. Connect to My Car from the cell phone.
The cell phone will be registered and will beconnected automatically to the audio systemwhile the text Synchronising is displayed. Formore information on synchronizing a cellphone, see page 145.
When a connection has been established, the symbol and the cell phone’s Bluetooth
name will be displayed. The cell phone cannow be controlled from the audio system.
Making a call1. Ensure that TELEPHONE is shown at the
top of the center console display and thatthe symbol is visible (by pressing brieflyon PHONE on the center console).
2. Dial the desired phone number or use thephone book (see page 145).
3. Press ENTER.
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
144
End the call by pressing EXIT.
Disconnecting the cell phoneThe cell phone is automatically disconnectedfrom the audio system if it is moved out ofrange. For more information about connec-tions, see page 143.
The cell phone can be manually disconnectedfrom the hands-free system by pressingPHONE. The hands-free system is also deac-tivated when the ignition is switched off (or ifthe driver’s door is opened on vehicles equip-ped with the optional keyless drive).
When the cell phone is disconnected from thehands-free system, a call in progress can becontinued using the cell phone’s own speakerand microphone.
NOTE
Certain cell phones may require confirma-tion from the phone’s keypad when a call istransferred from hands-free to the cellphone.
Handling calls
Incoming callsPress ENTER to answer a call, even if the audiosystem is currently in e.g., CD or FM mode.Press EXIT to defer a call.
Automatic answerThis function means that incoming calls will beanswered automatically. Activate or deactivatethe function in the menu system under Phonesettings Call options Automaticanswer.
Call settingsWhile a call is in progress, press MENU orENTER on the center console to access thefollowing functions:
• Microphone off–mute the audio system’smicrophone.
• Transfer call to mobile–transfer the callfrom hands-free to the cell phone.
• Phone book–this feature enables you tosearch for a stored telephone number.
NOTE
• On certain cell phones, the connectionis broken when the mute function isused, which is normal. If this happens,the hands-free system will prompt youto reconnect.
• A new call cannot be initiated whileanother call is in progress.
Sound settings
Call volumeCall volume can be adjusted when the hands-free system is activated. Use the buttons in thesteering wheel keypad or the audio system’svolume control.
Audio system volumeWhile a phone call is in progress, volume forthe audio system can be adjusted in the normalway with the audio system's volume control. Inorder to adjust volume during a phone call, theaudio system must be switched to one of theother modes (FM, CD, etc).
Audio system sound can be automaticallymuted when a phone call is received in Phonesettings Sounds and volume Muteradio and adjust the volume with the / keys on the center console.
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
145
Ringing volumeGo to Phone settings Sounds and volume
Ring volume and adjust the volume withthe / keys on the center console.
Ringing tonesThe hands-free system’s integrated ringingtones can be selected in Phone settingsSounds and volume Ring signal Ringsignal 1,2,3....
NOTE
The connected cell phone’s ring tone is notswitched off when one of the hands-freesystem's ringing tones is used.
If you prefer to use the connected cell phone’sring tone1, go to Phone settings Soundsand volume Ring signal Use mobilephone signal
More information about registeringand connecting cell phonesA maximum of 5 cell phones can be registeredin the hands-free system. Registration onlyneeds to be done once for each phone. Afterregistration, the cell phone no longer needs tobe in sight or searchable. Only one cell phonecan be connected to hands-free at a time.Phones can be unregistered in BluetoothRemove telephone
Automatic connectionWhen the hands-free system is active and themost recently connected cell phone is withinrange, it is detected automatically. When theaudio system searches for the most recentlyconnected phone, this phone’s name appearsin the display. To manually connect a differentcell phone, press EXIT.
Manual connectionTo connect a phone other than the one thatwas most recently connected or to switchbetween cell phones that are already regis-tered in the hands-free system:
1. Put the audio system in telephone mode.2. Press PHONE in the center console and
select one of the phones on the list.
A connection can also be established in themenu system under Bluetooth Connectphone or Change phone.
Phone bookIn order to use the hands-free system’s phonebook (list of contacts), TELEPHONE must bedisplayed at the top of the center console dis-play and the symbol must be visible.
The audio system stores a copy of the phonebook of each registered cell phone. The phonebook is automatically copied each time aphone is connected. This function can be acti-vated in Phone settings Synchronisephone book. Searches for contacts are onlymade in the phone book of the currently con-nected cell phone.
NOTE
If a particular cell phone does not supportcopying of the phone book, List is emptywill be displayed when copying has beencompleted.
If the phone book contains information aboutsomeone who is trying to call you, this infor-mation will be shown in the display.
1 Not supported by all cell phones
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
146
Searching for contactsThe easiest way to search for a contact in thephone book is to press and hold any of thebuttons 2–9 (see the illustration on page 142).This starts a search based on the first letter onthe button that has been pressed.
The phone book can also be accessed bypressing the navigation buttons / on thecenter console or by pressing / on thesteering wheel keypad. A search can also bemade in the phone book’s search menu inPhone book Search:
1. Enter the first letter of the contact’s nameand press ENTER or simply press ENTER.
2. Select the desired contact and pressENTER to make a call to that person.
Voice controlIf the cell phone that is currently connectedallows calls to be made via voice commands,this function can be used by pressing and hold-ing ENTER.
Voice mail numberThe phone number to your voice mail can bechanged in the menu Phone settings Calloptions Voice mail number. If no numberhas been stored, this menu can be accessedby a prolonged press on button 1. Once a
phone number has been stored, press and hold1 to dial this number.
Call listsLists of calls in a particular cell phone are cop-ied to the hands-free system each time thatphone is connected. These lists are then upda-ted while the phone is connected. PressENTER to show the most recently dialed num-bers. Other call lists can be found under Callregister.
NOTE
Certain cell phones display the list of themost recently dialed numbers in reverseorder.
Entering textText is entered by using the number buttons inthe center console. Press a button once toenter the first letter on the button, twice to enterthe second letter, etc. Continue to press thebutton to display other characters.
Press EXIT briefly to erase a character. Pressand hold EXIT to erase all of the characters thathave been entered. Use the / buttons onthe center console to navigate among the char-acters.
Button Function
Space .1-? ! , : " ' ( )
A B C 2 Ä Å À Æ Ç
D E F 3 È É
G H I 4 Ì
J K L 5
M N O 6 Ñ Ö Ò Ø
P Q R S 7 ß
T U V 8 Ü Ù
W X Y Z 9
Press briefly if two characters areto be entered in succession fromthe same button.
+ 0 @ * # & $ £ / %
Shift between uppercase andlowercase letters
04 Comfort and driving pleasure
Bluetooth hands-free connection
04
147
Bluetooth menus1. Missed calls
2. Received calls
3 Dialed calls
4. Phone book
4.1. Search
4.2. Copy fr. mobile phone
5. Bluetooth...
5.1. Change phone
5.2. Connect phone
5.3. Disconnect phone
5.4. Connect fr. mobile phone
6. Phone settings
6.1. Call options
6.1.2. Automatic answer
6.1.3. Voice mail number
6.2. Sounds and volume
6.3. IDIS
6.4. Synchronize phone book
04 Comfort and driving pleasure
Rear Seat Entertainment - Dual Screen (RSE)–option
04
148
IntroductionThe RSE system can be used at the same timeas the vehicle’s audio system.
When the rear seat passengers play a DVD,connect an external device to the RSE AUXconnectors, etc., and listen to the audiothrough the cordless headphones, the driverand front seat passenger can still use the vehi-cle's audio system to listen to the radio, a CD,music stored on an MP3 player, etc.
Please also refer to the Quick Guide providedwith the RSE system for additional information.
Electrical current - ignition keyThe RSE system can be activated with the igni-tion in mode I or II. or when the engine isrunning. While the engine is being started, afilm or music that is currently being played willpause momentarily and resume playing whenthe engine has started.
When the RSE system has been used oncewhen the ignition is switched off, it will be thenbe blocked for further use. RSE can be restar-ted by putting the ignition in mode I.
NOTE
Using RSE for more than approximately10 minutes with the engine switched off maydrain the vehicle’s battery and make it diffi-cult or impossible to start the engine.
If this occurs, a message will be displayedon the RSE system’s screens.
Music
Listening to a music CD1. Open the cover on the armrest between the
front seats and insert a CD into the RSEplayer’s slot with the disc’s label facing for-ward (away from the buttons).> The CD will begin to play automatically.
2. Switch on the cordless headphones andselect CH A for the left screen or CH B forthe right screen.> This will direct the sound to the head-
phones.
3. Adjust the headphone volume by using thethumb wheel on the headphones.
To listen through the vehicle’s audio sys-tem speakers, press MODE on the audiosystem control panel and select AUX.
Press A B on the RSE remote to routethe sound through the speakers.
Selecting a folder on the CD1. Insert the CD in the player.
2.Press .
3. Use the navigation buttons (the arrow keyssurrounding the OK button on the RSEremote control) to highlight a folder and/ora specific track.
4.Press to select a sub-folder.
Playback alternativesThe CD can be played in several different ways.Use the navigation buttons to select one of thealternatives.
With the dialogue box displayed:
1. Press the right navigation button to accessthe menu to the right..
2. Use the navigation keys to select one of thealternatives.
3.Confirm your choice by pressing .
Changing tracks on the CDChange tracks on the CD by pressing
or . Hold the respectivebuttons down for fast forward or reverse.
04 Comfort and driving pleasure
Rear Seat Entertainment - Dual Screen (RSE)–option
04
149
Pause1. Pause and restart the CD by pressing
.
2.Stop the CD by pressing .
3.Press again to eject the CD.
Home-burned CDsCDs burned on a home computer can beplayed. However, the quality of the sound maybe affected by the type of source file and for-mat used, and by the condition of the disc.
RSE-AUX connectors and 12-voltsocketThe three color-coded (yellow-white-red) RSE-AUX connectors can be used to connect anauxiliary device to the RSE system. Always fol-low the connection instructions provided withthe auxiliary device. Devices connected toRSE-AUX can use the RSE screens, cordlessheadphones, the headphone sockets or thevehicle’s audio system speakers.
Connecting a device to RSE-AUX
G03
0382
RSE-AUX connectors are located under the coverover the armrest between the front seats
1. Connect the video cable from the auxiliarydevice to the yellow connector.
2. Connect the left audio cable to the whiteconnector and the right cable to the redconnector.
3. Connect the power cable to the 12-voltsocket (if the device is designed for 12-voltcurrent).
For the location of the 12-volt sockets, seepage 189.
SystemThe formats supported by the system are:
Audioformat
CD-DA, DVD Audio Playback,MP3, WMA
Videoformat
DVD video, VCD, SVCD, Divx/MPEG-4, WMA video, Photo cdKodak, Photo CD JPG
Discformat
DVD-RAM, DVD-ROM, DVD-RW,DVD+RW, DVD-R, DVD+R, CD-R,CD-ROM, CD-RW, CD-3, HDCD
Advanced system settingsThese settings can only be made when there isno disc in the CD/DVD player.
Press MEDIA MENU.
GENERAL SETUP ANGLE MARK
CAPTION
AUDIO SETUP COMPRESSION
DVX(R)REGISTRATION
PREFERENCES TV TYPE
AUDIO
SUBTITLE
DEFAULTS
04 Comfort and driving pleasure
Rear Seat Entertainment - Dual Screen (RSE)–option
04
150
Replacing batteries in the remotecontrol and cordless headphonesThe remote control and headphones each runon 2 AAA batteries.
G03
1361
1. Remove the retaining screw and lift off thebattery cover.
2. Remove the old batteries and insert newones as indicated by the symbols in thebattery compartment.
3. Replace the battery cover and tighten theretaining screw.
G03
1358
1. Remove the retaining screw and lift off thebattery cover.
2. Remove the old batteries and insert newones as indicated by the symbols in thebattery compartment.
3. Replace the battery cover and tighten theretaining screw.
NOTE
If the temperature in the passenger com-partment is high (e.g., if the car has beenparked in the sun for a prolonged period) orif the batteries in the remote or headphonesare weak, a message will appear on the RSEscreens.
Concern for the environmentUsed batteries should be disposed of properly(e.g., at a recycling facility, etc).
04 Comfort and driving pleasure
Trip computer
04
151
Introduction
G02
2909
Information display and controls
READ–press to acknowledge/confirm/erase a message)
Thumb wheel (used to scroll among the tripcomputer menus)
RESET–resets certain functions
To scroll through trip computer information,move the thumb wheel up or down. Continueturning to return to the starting point.
Functions
NOTE
If a warning message appears while you areusing the trip computer, this message mustbe acknowledged in order to return to thetrip computer function. Acknowledge amessage by pressing READ.
To change the unit of measure specified fordistance and speed, contact an authorizedVolvo workshop.
Average speedThe system calculates the average speed fromthe last resetting. Reset using RESET.
Current speed in mph (Canadian modelsonly)This function provides the driver with an instan-taneous conversion of the car's current speedfrom km/h to mph.
Current speed in km/h (U.S. models only)This function provides the driver with an instan-taneous conversion of the car's current speedfrom mph to km/h.
Current fuel consumption(Instantaneous)Current fuel consumption is calculated everysecond. The information on the display is
updated every few seconds. When the vehicleis stationary, "----" appears on the display.
Average fuel consumptionThe average fuel consumption since the lastreset. Reset using RESET.
Driving distance on current fuel reserveThis function shows the approximate distancethat can be driven on the fuel remaining in thetank. The calculation is based on average fuelconsumption during the last 20 miles (30 km)of driving and the amount of fuel remaining inthe tank when the reading was taken. When themessage ---- miles to empty tank appears inthe display, refuel as soon as possible.
NOTE
The actual distance that can be driven onthe usable fuel remaining in the tank may beinfluenced by a change in driving style.
Resetting1. Select Average speed or Average fuel
consumption.
2. Press and hold RESET for approx. 1 sec-ond to reset the selected function. IfRESET is kept depressed for at 3 threeseconds, Average speed and Average fuelconsumption are reset simultaneously.
04 Comfort and driving pleasure
Compass
04
152
Operation
G02
9736
Rearview mirror with compass.
The rearview mirror has an integrated displaythat shows the compass direction in which thevehicle is pointing. Eight different directionsare shown with the abbreviations: N (north),NE (north east), E (east), SE (southeast), S(south), SW (southwest), W (west) and NW(northwest).
The compass is displayed automatically whenthe vehicle is started or in ignition mode II. Toswitch the compass on/off use a pen or similarobject and press in the button on the rear sideof the mirror.
Calibration
G02
9737
Calibrating the compass.
The compass may need to be calibrated if, forexample, the vehicle is driven into a new mag-netic zone. The character C is shown in themirror's display if calibration is necessary.
1. Stop the vehicle in a large open area, safelyout of traffic and away from steel structuresand high-tension electrical wires.
2. Start the vehicle.
NOTE
For best results from calibration, switch offall electrical equipment in the vehicle (cli-mate system, windshield wipers, audio sys-tem, etc.) and make sure that all doors areclosed.
3. Using a pen or similar object, press andhold the button on the rear side of mirroruntil C is shown again in the mirror(afterapprox. 6 seconds).
4. Drive as usual. C disappears from the dis-play when calibration is complete.
Alternative calibration method:
Drive slowly in a circle at a speed of nomore than 5 mph (8 km/h) until C disap-pears from the display when calibration iscomplete.
Selecting a magnetic zone
15
14
13
12
119
8
76
5
4
3
2
1
10
G01
8632
Magnetic zones.
The earth is divided into 15 magnetic zones.The correct zone must be selected for the com-pass to work correctly.
04 Comfort and driving pleasure
Compass
04
153
1. Put the ignition in mode II.
2. Using a pen or similar object, press andhold the button on the rear side of mirrorfor at least 3 seconds. The number for thecurrent area will be shown.
3. Press the button repeatedly until the num-ber for the required geographic area(1 – 15) is shown.
4. The display will revert to showing the com-pass direction after several seconds.
04 Comfort and driving pleasure
Stability system
04
154
IntroductionThe Dynamic Stability and Traction Controlsystem (DSTC) consists of a number of func-tions designed help reduce wheel spin, coun-teract skidding, and to generally help improvedirectional stability.
CAUTION
A pulsating sound will be audible when thesystem is actively operating and is normal.
Traction control (TC)This function is designed to help reduce wheelspin by transferring power from a drive wheelthat begins to lose traction to the wheel on theopposite side of the vehicle (on the same axle).
TC is most active at low speeds.
This is one of DSTC's permanent functions andcannot be switched off.
Active Yaw Control (AYC)This function helps maintain directional stabil-ity, for example when cornering, by brakingone or more of the wheels if the vehicle showsa tendency to skid or slide laterally.
This is one of DSTC's permanent functions andcannot be switched off.
Spin control (SC)The spin control function is designed to helpprevent the drive wheels from spinning whilethe vehicle is accelerating.
Under certain circumstances, such as whendriving with snow chains, or driving in deepsnow or loose sand, it may be advisable totemporarily switch off this function for maxi-mum tractive force.
WARNING
The car's handling and stability characteris-tics will be altered if the spin control functionhas been disabled.
Operation
G02
1409
Temporarily switching off Spin control1. Turn the thumbwheel until the DSTC
menu is shown.
2. Hold down the RESET button to togglebetween DSTC SPIN CONTROL ON orOFF.
Messages in the information displayDSTC Temporarily OFF – system functionhas been temporarily reduced due to highbrake disc temperature. The function is acti-vated automatically when the brakes havecooled.
DSTC Service required – the system hasbeen disabled due to a fault. If this occurs:
1. Stop the vehicle in a safe place and turn offthe engine.
2. Restart the engine.
If the message remains when the engine isrestarted, drive to an authorized Volvo work-shop to have the system inspected.
Symbols in the instrument panel
If the symbols and are dis-played at the same time, read the message inthe information display.
04 Comfort and driving pleasure
Stability system
04
155
If the symbol appears alone, it mayappear as follows:
• If the symbol flashes, this indicates that thestability system is actively functioning tohelp counteract wheel spin and/or a skid.
• If the symbol remains on for approximately2 seconds after the engine has beenstarted, this indicates that the system isperforming a self-diagnostic test.
WARNING
The stability system is intended to helpimprove driving safety. It supplements, butcan never replace, the driver's judgmentand responsibility when operating the vehi-cle. Speed and driving style should alwaysbe adapted to traffic and road conditions.
04 Comfort and driving pleasure
Active chassis system–Four C
04
156
Active chassis (Four C)–optionActive chassis, Four-C (Continuously Con-trolled Chassis Concept), regulates the cha-racteristics of the shock absorbers so that thecar's driving characteristics can be adjusted.There are three settings: Comfort, Sport andAdvanced.
ComfortComfort mode offers a somewhat softer rideand the transmission shifts gears at lower rpm.This mode is particularly suitable for long-dis-tance highway driving. The indicator light in thebutton will be on when this mode is selected.
SportIn this mode, the vehicle's body sway isreduced during cornering and steeringresponse is more immediate. The transmissionshifts up at higher rpm for sportier driving. Theindicator light in the button will be on to indi-cate that Sport mode has been selected.
AdvancedIn this mode, body sway in curves is minimaland steering response is very direct. Gear shift-ing is done at high rpm in each gear fordynamic and active driving.
Operation
G02
1410
Chassis settings
Use the buttons in the center console tochange setting. The setting in use when theengine is switched off is activated the next timethe engine is started.
Speed-dependent steering force(option)Steering force increases with the speed of thevehicle to give the driver enhanced sensitivity.At low speed the vehicle is easy to steer inorder to facilitate parking, etc.
Steering force can be changed under Carsettings Steering force level. For adescription of the menu system, seepage 120.
NOTE
This steering force level menu function can-not be accessed when the vehicle is inmotion.
04 Comfort and driving pleasure
Cruise control
04
157
Operation
G02
2910
Steering wheel-mounted controls and display
Standby mode
Resume set speed
Deactivating
Activate/set speed
Set speed indicator (parentheses indicatestandby mode)
Engaging the cruise control functionBefore a speed can be set, the cruise controlsystem must be engaged (put in standbymode).
Press the CRUISE button (1).
> The symbol illuminates and the text(---) mph (5) indicates that cruise con-trol is in standby mode.
NOTE
This does not set the vehicle's speed.
Setting a speedUse the or buttons set the vehicle's cur-rent speed. The set speed is shown in thedisplay.
NOTE
Cruise control cannot be engaged atspeeds below 20 mph (30 km/h).
Adjusting the set speedAfter a speed has been set, it can be increasedor decreased by using the or buttons.
1. Press and hold down or until thevehicle reaches the desired speed.> This will become the set speed when the
button is released.
2. Press or for approximately a halfsecond and release the button to increaseor decrease vehicle speed by approxi-mately 1 mph (1.6 km/h).
NOTE
• A temporary increase in speed bypressing the accelerator pedal, for lessthan 1 minute (e.g. when passinganother car), does not affect the currentcruise control setting. The vehicle willautomatically return to the previouslyset speed when the accelerator pedal isreleased.
• If one of the cruise control buttons iskept depressed for more than approx.1 minute cruise control is disengaged.The engine must then be switched off inorder to reset cruise control.
Automatic deactivationCruise control is automatically deactivatedtemporarily if one of the following occurs:
• If the speed drops below approximately20 mph (30 km/h).
• When the brake pedal is depressed.
• If the gear selector is moved to position N.
• During wheel spin or wheel lock-up.
• If the vehicle's speed is increased by usingthe accelerator pedal for more than 1minute.
The currently set speed will be saved in thesystem's memory.
04 Comfort and driving pleasure
Cruise control
04
158
Temporary deactivationThe driver can temporarily deactivate cruisecontrol by pressing 0. The saved speed isshown in brackets in the information display.
Resume set speedIf cruise control has been deactivated tempo-rarily, it can be reactivated by pressing . Thevehicle's speed returns to the most recently setspeed.
WARNING
There may be a significant increase in speedafter the button has been pressed.
DeactivationCruise control is disengaged with CRUISE, byputting the gear selector in Neutral, or byswitching off the engine. The set speed iscleared.
WARNING
Cruise control should not be used in heavytraffic or when driving on wet or slipperyroads. Cruise control may not maintain setspeed on steep downgrades.
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
159
IntroductionCollision Warning with Auto-brake is designedto assist the driver if there is a risk of a collisionwith the vehicle ahead, if that vehicle is at astandstill or moving in the same direction asyour vehicle. Auto-brake helps reduce the col-lision speed.
Collision Warning consists of the followingthree functions:
1. Collision warningThe driver is warned of the imminent risk of acollision.
2. Brake supportThis helps the driver brake efficiently in a criti-cal situation.
3. Auto-brakeThis function brakes the vehicle automaticallyif a collision cannot be avoided.
WARNING
The auto-brake function connot prevent acollision but instead is intended to reducespeed at the moment of impact. For fullbraking effect, driver must apply the brakes.
WARNING
• The collision warning system does notwork in all driving situations, and traffic,weather and road conditions.
• The collision warning system is notdesigned to detect pedestrians.
• Warnings are only provided when therisk of collision is high. The Functionsection provides information about lim-itations that the driver must be aware ofbefore use.
• Never wait for a collision warning. Thissystem is designed to be a supplemen-tary driving aid. It is not, however,intended to replace the driver's atten-tion and judgement. The driver isresponsible for maintaining a safe dis-tance and speed, even when the colli-sion warning system is in use.
• Maintenance of the collision warningsystem components must only be per-formed by a trained and qualified Volvotechnician.
Function
G017382
Function overview
Visual warning signal, collision risk
Radar sensor
Camera
Collision warningThe radar sensor and the camera worktogether to detect stationary vehicles and vehi-cles that are moving in the same direction asyour vehicle. If there is a risk of collision, thedriver is alerted by a flashing red warning lightand an audible warning signal. Collision warn-ing is active at speeds above 5 mph (7 km/h).
Brake supportIf the risk of collision continues to increase afterthe collision warning has been given, brake
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
160
support is activated. Brake support preparesthe brake system to react quickly, and thebrakes are applied slightly. This may be expe-rienced as a light tug.
If the brakes are applied quickly, full brakingeffect will be provided, even if pressure on thebrake pedal is light.
Auto-brakeIf a collision is imminent and the driver has notapplied the brakes, the auto-brake function isactivated without the driver pressing the brakepedal. Limited brake force is applied to reducethe vehicle’s speed when the collision occurs.
WARNING
The auto-brake function connot prevent acollision but instead is intended to reducespeed at the moment of impact. For fullbraking effect, driver must apply the brakes.
NOTE
The auto-brake function is always on andcannot be turned off.
OperationSome settings are controlled from the centerconsole via a menu system. For information onhow the menu system is used, see page 120.
On and offTo switch Collision Warning on or off, go intothe menu Car settings Collision warningsettings and select On or Off. When the engineis started, the setting that was selected whenit was switched off will be used.
Activating/deactivating warning signalsThe collision warning system’s audible and vis-ual signals are activated automatically whenthe engine is started if the collision warningsystem is activated.
The audible warning signal can be activated/deactivated by selecting the alternative On orOff in Car settings Collision warningsettings Warning sound.
Setting a warning distanceThis setting determines the distance at whichthe visual and audible warnings are triggered.Select Long, Normal or Short under Carsettings Collision warning settingsWarning distance
The warning distance determines the level ofsensitivity used by the system. The warningdistance Long provides an earlier warning.Begin by using Long and if the system givestoo many warnings, try changing to Normal.
WARNING
• The setting Short should only be usedin situations where traffic is light andmoving at low speeds.
• Collision Warning alerts the driver to therisk of a collision but this function can-not reduce the driver’s reaction time.
• For Collision Warning to be as effectiveas possible, it is recommended that Dis-tance Alert be set to 4 or 5, seepage 172.
NOTE
• When adaptive cruise control is used,the warning light and signal will be usedby cruise control, even if they have beendeactivated by the driver.
• In situations where traffic is moving atconsiderably different speeds, or if thevehicle ahead brakes suddenly, warn-ings may be considered to be late, evenif the setting Long has been selected.
Checking settingsThe current Collision Warning settings can bechecked by going into the menu system at Carsettings Collision warning settings. Seepage 120 for more information on the menusystem.
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
161
LimitationsStrong sunlight, reflections, extreme light con-trasts, the use of sunglasses, or if the driver isnot looking straight ahead may make the visualwarning signal in the windshield difficult to see.For this reason, always activate the audiblewarning signal in such conditions.
NOTE
The visual warning signal may be temporar-ily disengaged in the event of high passen-ger compartment temperature due to strongsunlight, etc. If this occurs, the audiblewarning signal will be used, even if it hasbeen deactivated in the menu system.
Warnings may not appear if the distance to thevehicle ahead is very small or if steering wheeland pedal movements are great, for example,due to a very active driving style.
WARNING
• In certain situations, the system cannotprovide warnings or warning may bedelayed if traffic conditions or otherexternal factors make it impossible forthe radar sensor or camera to detect thevehicle ahead.
• Warnings may not be provided if thedistance to the vehicle ahead is short,or if movements of the steering wheel/brake pedal are great, such as duringactive driving.
• The sensor system has a limited rangefor stationary or slow-moving vehiclesand may therefore give delayed or nowarnings if your vehicle’s speed isabove approximately 45 mph(70 km/h).
• Warnings for stationary or slow-movingvehicles may not be provided in darkconditions.
The Collision Warning system uses the sameradar sensors as Adaptive Cruise Control. Formore information on the radar sensor and itslimitations, see page 168.
If no warning is given, or if a warning is delayed,Auto-brake will also not be provided or will bedelayed.
NOTE
If warnings are given too frequently, thewarning distance can be reduced (seepage 160. This causes the system to pro-vide later warnings, which decreases thetotal number of warnings provided.
The camera’s limitationsThe camera is used by Collision Warning withAuto-brake, Driver Alert Control (seepage 175), and Lane Departure Warning (seepage 177).
NOTE
• To help protect the camera in very hotconditions, it may be temporarilyswitched off for approximately 15minutes after the engine has beenstarted.
• Keep the section of the windshield infront of the camera clean and free of ice,snow, or condensation.
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
162
WARNING
• The camera has the same limitations asthe human eye. In other words, its“vision is impaired” by adverse weatherconditions such as heavy snowfall,dense fog, etc. These conditions mayreduce the function of systems thatdepend on the camera or cause thesesystems to temporarily stop function-ing.
• Never place any objects, decals, etc.,on the windshield in front of the camera.This could reduce or block the camera’sfunction, and could cause one or moreof the systems that utilize the camera tostop functioning.
• Strong sunlight, reflections from theroad surface, ice or snow covering theroad, a dirty road surface, or unclearlane marker lines may drastically reducethe camera’s capacity to detect the sideof a lane or another vehicle.
Fault tracing and actionsIf the message Windshield sensorsblocked is displayed, this means that the cam-era is obscured and cannot detect vehicle orroad marker lines in front of the vehicle.
This, in turn, means that Collision Warning withAuto-brake, Lane Departure Warning, andDriver Alert Control will not have full function-ality.
The table lists possible causes for this mes-sage being displayed, and suitable actions.
Cause Action
The surface of the windshield in front of the camera is dirty or coveredwith ice or snow.
Clean or clear the section of the windshield in front of the camera.
Fog, heavy rain or snow is interfering with the function of the camera. No action possible. Heavy precipitation may affect the function of thecamera.
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
163
Cause Action
The surface of the windshield is clean but the message remains in thedisplay.
Wait a short time. It may take several minutes for the camera to registervisibility.
The surface between the inside of the windshield and the camera is dirty. Contact an authorized Volvo retailer or service technician to have thissurface cleaned.
Symbols and messages in the display
Symbol Message Description
Collision warn.
OFF
Collision Warning is switched off. This message is displayed when the engine is started and will dis-appear after approx. 5 seconds. It can also be erased by pressing the READ button.
Collision warn.
Unavailable
Collision Warning cannot be activated. This message is displayed when the driver attempts to activatethe function. It will disappear after approx. 5 seconds or can be erased by pressing the READ button.
Auto braking
was activated
Auto-braking has been active.
Camera blocked
See manual
The camera is temporarily not functioning. This message is displayed if the camera is obstructed bysnow, ice, dirt, etc., on the windshield. Clean the area of the windshield in front of the camera, seepage 161 for more information on the camera’s limitations.
04 Comfort and driving pleasure
Collision warning with Auto-brake (option)
04
164
Symbol Message Description
Radar blocked
See manual
Collision Warning and Auto-brake are temporarily not functioning. The radar sensor is blocked, forexample by heavy rain or snow that has accumulated in front of the sensor, and cannot detect othervehicles, see page 168 for more information on the radar sensor’s limitations.
Collision warn.
Service required
Collision Warning and Auto-brake are partially or completely not functioning.
Contact a trained and qualified Volvo service technician if the message remains in the display.
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
165
IntroductionAdaptive Cruise Control (ACC) is an optionalsystem designed to assist the driver by main-taining a set speed or a set distance to thevehicle ahead. It is primarily intended for useon long straight roads in steady traffic, such ason highways and other main roads.
WARNING
• Do not use the adaptive cruise controlsystem in demanding driving conditionssuch as city traffic, winding roads, atintersections, on slippery surfaces, inpoor visibility, heavy rain, etc.
• Maintenance of cruise control compo-nents must only be performed by anauthorized Volvo workshop.
WARNING
• Adaptive cruise control cannot cover alldriving situations and traffic, weatherand road conditions. The Function sec-tion provides information about limita-tions that the driver must be aware ofbefore using the adaptive cruise con-trol.
• This system is designed to be a supple-mentary driving aid. It is not, however,intended to replace the driver's atten-tion and judgement. The driver isresponsible for maintaining a safe dis-tance and speed and must intervene ifadaptive cruise control does not main-tain a suitable speed or suitable dis-tance.
Function
G02
1412
Function overview
Warning light, braking by driver required
Controls
Radar sensor in front grille
Adaptive cruise control consists of:
• A cruise control system to maintain a setspeed
• A system to maintain a set distance to thevehicle ahead (expressed as a time inter-val. For example, you can choose toremain approximately 2 seconds behindthe vehicle ahead).
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
166
WARNING
• Adaptive cruise control is not a collisionavoidance system. The driver is alwaysresponsible for applying the brakes ifthe system does not detect anothervehicle.
• Adaptive cruise control does not reactto slow moving or stationary vehicles.
The distance to the vehicle ahead (in the samelane) is measured by a radar sensor. Your vehi-cle's speed is regulated by acceleration andbraking. The brakes may emit a sound whenthey are being modulated by the adaptivecruise control system. This is normal.
WARNING
The brake pedal moves when the adaptivecruise control system modulates thebrakes. Do not rest your foot under thebrake pedal.
The adaptive cruise control system is designedto follow the vehicle ahead of you in the samelane, at a set time interval.
If the radar sensor has not detected a vehicleahead, the system will then attempt to maintainthe set speed. This is also the case if the speed
of the vehicle ahead exceeds the speed thatyou have set.
The adaptive cruise control system is designedto smoothly regulate speed. However, thedriver must apply the brakes in situations thatrequire immediate braking. This applies whenthere are great differences in speed betweenvehicles, or if the vehicle ahead brakes sud-denly.
WARNING
Due to limitations in the radar sensor, brak-ing may occur unexpectedly or not at all,see page 168.
Adaptive cruise control can only be activatedat speeds above 20mph (30 km/h). If speedfalls below 20 mph (30 km/h) or if engine speed(rpm) becomes too low, adaptive cruise controldisengages and will no longer modulate thebrakes. In situations when adaptive cruise con-trol cannot be activated Cruise ControlUnavailable is shown in the display, seepage 170.
WARNING
When adaptive cruise control disengages,the brakes will not be modulated automati-cally. The driver must assume full controlover the vehicle.
Warning light-driver braking requiredAdaptive cruise control has a braking capacitythat is equivalent to approximately 30% of thevehicle's total braking capacity. In situationsrequiring more brake force than ACC can pro-vide, if the driver does not apply the brakes, anaudible signal will sound and a red warninglight will illuminate in the windshield to alert thedriver to react.
NOTE
Strong sunlight, reflections, extreme lightcontrasts, the use of sunglasses, or if thedriver is not looking straight ahead maymake the visual warning signal in the wind-shield difficult to see.
WARNING
Cruise control only warns of vehiclesdetected by the radar sensor, seepage 168. In some cases there may be nowarning or the warning may be delayed. Thedriver should always apply the brakes whennecessary.
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
167
Operation
G02
7123
Controls and display
Activate and resume settings, increasespeed
Standby mode, on/off
Set time interval
Activate and set a speed
Set speed (parentheses indicate standbymode)
Time interval while it is being set
Time interval after it has been set
Engaging the cruise control functionBefore ACC can be used, it must first be put instandby mode. To do so, press . The symbol
illuminates in the display and (---) indicatethat ACC is in standby mode.
Setting a speedUse the or buttons to store (set) thevehicle's current speed. The set speed, forexample 55 mph, is shown in the display.
NOTE
Adaptive cruise control cannot be engagedat speeds below 20 mph (30 km/h).
The “car” symbol illuminateson the left side of the displaywhen the radar sensordetects another vehicleahead. The distance to a vehi-cle ahead is only regulatedwhen this symbol is illumi-
nated.
Adjusting the set speedAfter a speed has been set, it can be increasedor decreased by using the or buttons.
When the system is in active mode, the but-ton has the same function as , but results ina smaller increase in speed.
NOTE
• If one of the adaptive cruise control but-tons is pressed for more than approxi-mately one minute, ACC will be deacti-vated. The engine must then beswitched off and restarted to reset ACC.
• In some situations cruise control cannotbe activated. Cruise ControlUnavailable is shown in the display,see page 170.
Setting a time intervalThe set time interval to vehicles ahead isincreased with and decreased with .The current time interval is shown briefly in thedisplay following adjustment.
Five different time intervalscan be selected and areshown in the display as 1–5horizontal bars. The greaterthe number of bars, the longerthe time interval. At lowspeeds, when the distance to
the vehicle ahead is short, ACC increases thetime interval slightly. In order to follow the vehi-cle ahead as smoothly as possible, ACC allowsthe time interval to vary considerably in certainsituations.
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
168
WARNING
• Only use a time interval that is suitablein current traffic conditions.
• A short time interval gives the driver lim-ited reaction time if an unexpected sit-uation occurs in traffic.
The number of bars indicating the selectedtime interval are shown while the setting isbeing made and for several seconds afterward.A smaller version of the symbol is then shownto the right in the display. The same symbol isalso displayed when Distance Alert is acti-vated, see page 172 .
Deactivating and resuming settingsCruise control is deactivated, either with ashort press on , or by action taken by thedriver, such as braking, etc. The set speed, forexample 55 mph, is then shown in parenthe-ses. Speed and time interval are resumed bypressing .
WARNING
There may be a significant increase in speedafter the button has been pressed.
A short press on in standby mode or a longpress in active mode deactivates cruise con-
trol. The set speed is then cleared and cannotbe resumed.
When ACC is activated, the vehicle’s speedincreases by approximately 1 mph (1 km/h)each additional time is pressed.
Deactivation due to action by the driverACC is deactivated:
• when the brakes are applied
• if the gear selector is moved to N
• if the accelerator pedal is depressed for anextended period.
NOTE
If the accelerator pedal is only depressed fora short time, such as when passing anothervehicle, ACC is deactivated temporarily andis reactivated when the pedal is released.
Automatic deactivationAdaptive cruise control is linked to other sys-tems such as ABS, the stability and tractioncontrol system (DSTC), and the Distance AlertSystem. If any of these systems are not func-tioning properly, adaptive cruise control isautomatically deactivated.
In the event of automatic deactivation a signalwill sound and the message Cruise ControlCanceled is shown in the display. The driver
must then intervene and adapt the vehicle'sspeed to the surrounding traffic.
Automatic deactivation may be caused if:
• the vehicle's speed falls below 20 mph(30 km/h)
• the wheels lose traction or if the anti-lockbrake system (ABS) is activated
• brake temperature is high
• engine speed (rpm) is too low
• the radar sensor is obstructed by, forexample, wet snow or rain.
The radar sensor and its limitationsThe radar sensor is used by both AdaptiveCruise Control and the Collision Warning Sys-tem with Auto-brake. It is designed to detectcars or larger vehicles driving in the samedirection as your vehicle.
WARNING
Accessories or other objects, such as extraheadlights, must not be installed in front ofthe grille.
Modification of the radar sensor could makeits use illegal.
The radar sensor's capacity to detect vehiclesahead is impeded:
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
169
• if the radar sensor is obstructed and can-not detect other vehicles, for example inheavy rain, or if snow or other objects areobscuring the radar sensor.
NOTE
Keep the area in front of the radar sensorclean.
• if the speed of vehicles ahead is signifi-cantly different from your own speed.
WARNING
The radar sensor has a limited field of vision.In some situations it may detect a vehiclelater than expected or not detect vehicles atall.
G02
1414
Radar sensor field of vision (gray)
In certain situations, the radar sensor can-not detect vehicles at close quarters, forexample a vehicle that suddenly enters the
lanes between your vehicle and the onethat the system has already detected.
Small vehicles, such as motorcycles, orvehicles not driving in the center of the lanemay remain undetected.
In curves, the radar sensor may detect thewrong vehicle or lose a detected vehiclefrom view.
Fault tracing and actionsIf the message Radar blocked See manual isdisplayed, this means that the radar signalsfrom the sensor have been obstructed and thata vehicle ahead cannot be detected.
This, in turn, means that the functions of theACC, Distance Alert, and Collision WarningSystem with Auto-brake will not function.
The table lists possible causes for this mes-sage being displayed, and suitable actions.
Cause Action
The surface of the radar in the grille is dirty or obstructed in some way. Clean the radar surface, or remove the object causing the obstruction.
Heavy rain or snow is interfering with the radar signals. No action possible. Heavy precipitation may affect the function of theradar.
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
170
Cause Action
Swirling water or snow from the surface of the road may interfere withthe radar signals.
No action possible. A very wet or snow-covered road surface may affectthe function of the radar.
The surface of the radar is clean but the message remains in the display. Wait a short time. It may take several minutes for the radar to detect thatit is no longer obstructed.
Symbols and messages in the display
Symbol Message Description
Standby mode or active mode when no other vehicle has been detected.
Active mode with a detected vehicle to which ACC is adapting speed/distance.
Time interval while it is being set.
Time interval after it has been set.
Turn on DSTC
to enable Cruise
ACC cannot be activated until the stability system (DSTC) has been activated. see page 154 for moreinformation on DSTC.
Cruise control canceled ACC has been automatically switched off.
The driver must regulate the vehicle’s speed/distance to the vehicle ahead.
Cruise control unavailable ACC cannot be activated. This may be due to:
• high brake temperature
• the radar sensor is obstructed (by heavy rain, snow, etc.)
04 Comfort and driving pleasure
Adaptive Cruise Control–ACC (option)
04
171
Symbol Message Description
Radar blocked
See manual
ACC has been temporarily disconnected because the radar is obstructed in some way and cannotdetect other vehicles.
see page 168 for information on the radar sensor’s limitations..
Cruise control
Service required
ACC is not functioning.
Contact a trained and qualified Volvo service technician.
04 Comfort and driving pleasure
Distance alert
04
172
IntroductionDistance Alert is part of Adaptive Cruise Con-trol and is a function that provides informationabout the time interval to the vehicle ahead.
Time interval information is only given for avehicle that is driving ahead of your vehicle, inthe same lane, and in the same direction. Noinformation is provided for vehicles drivingtoward you, moving very slowly, or at a stand-still.
G017362
A smaller section of the red warning light in thewindshield glows steadily if your vehicle iscloser to the vehicle ahead than the set timeinterval.
NOTE
Distance Alert is in active mode while Adap-tive Cruise Control is active.
Distance Alert is active at speeds aboveapproximately 20 mph (30 km/h).
WARNING
Distance Alert only indicates the distance tothe vehicle ahead. It does not affect thespeed of your vehicle.
Operation
G017371
Press the button in the center instrumentpanel to switch this function on or off.> The indicator light in the button illumi-
nates when the function is on.
Setting a time intervalThe buttons for setting a time interval arelocated on the left side of the steering wheel,see the illustration on page 167 .
Press to increase the interval or todecrease it.
Five different time intervalscan be selected and areshown in the display as 1–5horizontal bars. The greaterthe number of bars, the longerthe time interval.
No. of bars Approx. time interval(in seconds)
1 1.0
2 1.4
3 1.8
4 2.2
5 2.6
The number of bars indicating the selectedtime interval are shown while the setting isbeing made and for several seconds afterward.A smaller version of the symbol is then shownto the right in the display. The same symbol is
04 Comfort and driving pleasure
Distance alert
04
173
also displayed when Adaptive Cruise Control isactivated.
NOTE
• The higher your vehicle’s speed, thegreater the distance to the vehicleahead, measured in feet (meters), for agiven time interval.
• The set time interval is also used byAdaptive Cruise Control, see page 167.
WARNING
Only use a time interval that is suitable incurrent traffic conditions.
LimitationsThe Distance Alert function uses the sameradar sensor used by Adaptive Cruise Controland the Collision Warning system. See page168 for more information on the radar sensor’slimitations.
NOTE
Strong sunlight, reflections, extreme lightcontrasts, the use of sunglasses, or if thedriver is not looking straight ahead maymake the visual warning signal in the wind-shield difficult to see.
WARNING
• Bad weather or winding roads mayaffect the radar sensor’s capacity todetect vehicles ahead.
• The size of the vehicle ahead, such as amotorcycle, may also make it difficult todetect. This may result in the warninglight illuminating at a shorter distancethan the one that has been set, or thatthe light will not come on at all.
Symbol Message Description
Time interval while it is being set.
Time interval after it has been set.
04 Comfort and driving pleasure
Distance alert
04
174
Symbol Message Description
Radar blockd
See manual
Distance Alert has been temporarily disconnected because the radar is obstructed in some way andcannot detect other vehicles. See page 168 for information on the radar sensor’s limitations.
Collision warn.
Service required
Distance Alert or Collision Warning with Auto-brake is not functioning properly. Contact a trained andqualified Volvo service technician.
04 Comfort and driving pleasure
Driver Alert System (option)
04
175
IntroductionThe Driver Alert System is designed to help adriver who may be becoming fatigued or whois inadvertently leaving the lane.
The Driver Alert System consists of two differ-ent functions that can be switched on togetheror separately.
• Driver Alert Control (DAC)
• Lane Departure Warning (LDW)
When one or both of the functions has beenswitched on, it is in standby mode and is acti-vated when the vehicle exceeds a speed of40 mph (65 km/h).
The function deactivates if speed goes under37 mph (60 km/h).
Both functions use a camera that is dependenton the road/lane being clearly marked by pain-ted lines on each side.
WARNING
The Driver Alert system does not function inall situations and is designed to be a sup-plementary aid. It is not, however, intendedto replace the driver’s attention and judge-ment.
Driver Alert Control (DAC)–generalinformation
G017332
This function is intended to alert the driver ifhis/her driving becomes erratic, such as if thedriver is distracted or fatigued. The camera hascertain limitations, see page 170.
A camera monitors the painted lines markingthe lane in which the vehicle is traveling andcompares the direction of the road with thedriver’s movements of the steering wheel. Thedriver is alerted if the vehicle does not followthe lane smoothly.
NOTE
The camera has certain limitations, seepage 161.
DAC is designed to help detect a slowly chang-ing driving pattern. It is primarily intended to beused on main roads and is not meant for use incity traffic.
WARNING
• DAC is not intended to extend the dura-tion of driving. Always plan breaks atregular intervals to help remain alert.
• In certain cases, fatigue may not affectthe driver’s behavior. In situations ofthis type, no warning will be provided.Therefore, it is important to take breaksat regular intervals, regardless ofwhether or not DAC has given a warn-ing.
LimitationsIn certain situations, DAC may provide warn-ings even if the driver’s driving pattern has notbecome erratic.
• if the driver is testing the LDW function
• in strong crosswinds
• on grooved road surfaces.
04 Comfort and driving pleasure
Driver Alert System (option)
04
176
Operating DACCertain settings can be made from the menusystem controlled from the center instrumentpanel, see page 120 for more information onthe menu system.
The current system status can be checked onthe trip computer’s display by using the but-tons on the left steering wheel lever.
G017329
Thumb wheel. Turn this wheel until DriverAlert is displayed. The second line showsthe alternative Off, Unavailable, or[-----], i.e., the number of bars.
READbutton. Confirms and erases a mes-sage in the display.
Activating DACIn the center instrument panel, go to Carsettings Driver Alertand select On.
The function is activated when thevehicle exceeds a speed of 40 mph(65 km/h). The display will show levelmarkings of 1–5 bars, where a low
number of bars indicates erratic driving. A highnumber of bars indicates stable driving.
If the vehicle is being driven erratically, thedriver will be alerted by an audible signal andthe message Driver Alert, Time for a break isdisplayed. The warning will be repeated after ashort time if the driving pattern remains thesame.
WARNING
• An alert should be taken seriously sinceit is sometimes difficult for a driver torealize that he/she is fatigued.
• In the event of a warning or if the driverfeels fatigued, stop as soon as possiblein a safe place and rest.
04 Comfort and driving pleasure
Driver Alert System (option)
04
177
Symbols and messages in the display
Symbol Message Description
Driver Alert
OFF
The function is not switched on.
Driver Alert
Unavailable
The vehicle’s speed is below 37 mph (60 km/h) or the road lacks clear marking lines.
Driver Alert The function is analyzing the driver’s driving pattern. The number of bars varies from 1–5, where a lownumber of bars indicates erratic driving. A high number of bars indicates stable driving.
Driver Alert
Time for a break
The vehicle has been driven erratically. The driver receives an audible signal and a text message.
Camera blocked
See manual
The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Clean the areaof the windshield in front of the camera. See page 161 for information on the camera’s limitations.
Driver Alert Sys
Service required
The system is not functioning. Contact a trained and qualified Volvo service technician if the messageremains in the display.
04 Comfort and driving pleasure
Driver Alert System (option)
04
178
Lane Departure Warning (LDW)–general information
G017394
This function is designed to help reduce therisk of accidents in situations where the vehicleleaves its lane and there is a risk of driving offthe road or into the opposite lane. LDW con-sists of a camera that monitors the lane’s sidemarker lines. The driver is alerted by an audiblesignal if the vehicle crosses a side marker lineor the road’s center dividing line.
Operation and function
G017426
LDW can be switched on or off by pressing thebutton on the center console. A light in the but-ton illuminates when the function is on.
The trip computer display shows Lane DepartWarn Unavailable when the function is instandby mode.
When LDW is in standby mode, the function isactivated automatically after the camera hasmonitored the road’s side marker lines and thevehicle’s speed exceeds 40 mph (65 km/h).Lane Depart Warn Available will be dis-played.
If the camera can no longer monitor the road’sside marker lines, or if the vehicle’s speed fallsbelow 37 mph (60 km/h), LDW will return tostandby mode and Lane Depart WarnUnavailable will be displayed.
If the vehicle unexpectedly crosses the lane’sleft or right side marker lines, the driver will bealerted by an audible signal.
No warning signal will be given in the follow-ing situations:
• The turn signal is being used
• The driver’s foot is on the brake pedal1
• The throttle pedal is pressed quickly
• If the steering wheel is moved quickly
• In sharp turns that cause the vehicle’sbody to sway.
See page 161 for information on the camera’slimitations.
WARNING
The driver will only be warned once for eachtime the wheels cross a marker line. Noalarm will be given if a marker line isbetween the wheels.
1 A warning will be given even when Increased sensitivity has been selected.
04 Comfort and driving pleasure
Driver Alert System (option)
04
179
Symbols and messages in the display
Symbol Message Description
Lane departure
warning On/Off
The function is switched on or off. The text disappears after 5 seconds.
Lane Depart Warn
Available
The function is monitoring the road’s marker lines.
Lane Depart Warn
Unavailable
Speed is below 37 mph (60 km/h) or if the road lacks clear marker lines.
Camera blocked
See manual
The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Cleanthe area of the windshield in front of the camera. See page 161 for information on the camera’slimitations.
Driver Alert Sys
Service required
The system is not functioning. Contact a trained and qualified Volvo service technician if themessage remains in the display.
SettingsSettings for Lane Departure Warning can bemade in the menu system under Car settings
Lane Departure Warning. See page 120for more information on the menu system.
On at startup: This selection puts the functionin standby mode each time the engine is
started. Otherwise, the system will be in themode that it was in when the engine wasswitched off.
Increased sensitivity: This selection increa-ses the function’s sensitivity. Warnings will begiven at an earlier stage and fewer limitationsapply.
04 Comfort and driving pleasure
Park assist (option)
04
180
IntroductionThe park assist system is designed to assistyou when driving into parking spaces, garages,etc. It utilizes four ultrasound sensors locatedin one or both bumpers to measure the dis-tance to a vehicle, object, or a person who maybe close to the front or rear of your vehicle.
This system is available in the rear bumperonly, or in both the front and rear bumpers.
Park assist utilizes four ultrasound sensors inthe bumper(s) to measure the distance to avehicle, object, or a person who may be closeto the front or rear of your vehicle. An audiblesignal and symbols in the audio system’s dis-play indicate the distance to the object
WARNING
Park Assist is an information system, NOT asafety system. This system is designed tobe a supplementary aid when parking thevehicle. It is not, however, intended toreplace the driver's attention and judge-ment.
Function
G01
8386
Park assist button
The system is activated automatically when thevehicle is started. The indicator light in the but-ton in the center console illuminates when thesystem is on.
• The front park assist system is active fromthe time the engine is started until the vehi-cle exceeds a speed of approximately10 mph (15 km/h). It is also active when thevehicle is backing up.
• Rear park assist is active when the engineis running and reverse gear has beenselected.
Activating/deactivatingThe system is activated automatically when thevehicle is started.
Press the Park assist button on the centerconsole to temporarily deactivate the sys-tem(s).> The indicator light in the button will go
out when the system has been deacti-vated.
Park assist will be automatically reactivated thenext time the engine is started, or if the buttonis pressed (the indicator light in the button willilluminate).
NOTE
• Front park assist is disengaged auto-matically when the parking brake isapplied.
• If the vehicle is equipped with front andrear park assist, both systems will bedeactivated by pressing the button.
04 Comfort and driving pleasure
Park assist (option)
04
181
Signals from the park assist system
Active
Active
Active
1
2
3
Views in the display
Visual indicatorThe audio system’s display gives an overviewof the vehicle’s position in relation to adetected object.
The markers in the display indicate that one ormore of the four sensors has detected anobject. The greater the number of markers, thecloser the vehicle is to the object.
Display in a vehicle with rear park assistonly. Here, an object has been detected byboth of the right rear sensors.
Display in a vehicle with both front and rearpark assist. The solid marker in this exampleindicates that an object is closer than approx-imately 1 foot (30 cm) to the right front sensor.
Display in a vehicle with both front and rearpark assist. Reverse gear is selected and noobjects have been detected in front of orbehind the vehicle.
Audible signalThe Park Assist system uses an intermittenttone that pulses faster as you come close to anobject, and becomes constant when you arewithin approximately 1 ft (30 cm) of an objectin front of or behind the vehicle (example 2 inthe illustration). If there are objects within thisdistance both behind and in front of the vehicle,the tone alternates between front and rearspeakers.
If the volume of another source from the audiosystem is high, this will be automatically low-ered.
Rear park assist
G02
1423
The distance monitored behind the vehicle isapproximately 5 ft (1.5 m). The audible signalcomes from the rear speakers.
The system must be deactivated when towinga trailer, carrying bicycles in a rear-mountedcarrier, etc, which could trigger the rear parkassist system's sensors.
NOTE
Rear park assist is deactivated automati-cally when towing a trailer if Volvo genuinetrailer wiring is used.
04 Comfort and driving pleasure
Park assist (option)
04
182
Front park assist
G02
1424
The distance monitored in front of the vehicleis approximately 2.5 ft (0.8 m). The audible sig-nal comes from the audio system's frontspeakers.
It may not be possible to combine auxiliaryheadlights and front park assist since theselights could trigger the system's sensors.
Faults in the systemIf the information symbol illuminates and ParkAssist syst Service required is shown on theinformation display, this indicates that the sys-tem is not functioning properly and has beendisengaged. Consult a trained and qualifiedVolvo service technician.
CAUTION
In certain circumstances, the park assistsystem may give unexpected warning sig-nals that can be caused by external soundsources that use the same ultrasound fre-quencies as the system. This may includesuch things as the horns of other vehicles,wet tires on asphalt, pneumatic brakes,motorcycle exhaust pipes, etc. This doesnot indicate a fault in the system.
Cleaning the sensors
G02
8933
G02
1425
Location of the rear sensors
The sensors must be cleaned regularly toensure that they work properly. Clean themwith water and a suitable car washing deter-gent.
Ice and snow covering the sensors may causeincorrect warning signals.
NOTE
If the sensors are obstructed by e.g., dirt,snow, or ice, this could result in false warn-ing signals from the park assist system.
04 Comfort and driving pleasure
Blind Spot Information System (option)
04
183
Introduction
G02
1426
BLIS camera
Indicator light
BLIS symbol
The Blind Spot Information System (BLIS) is aninformation system that indicates the presenceof another vehicle moving in the same directionas your vehicle in the side-view mirror's "blindarea."
CAUTION
The BLIS system should only be repaired bya trained and qualified Volvo service tech-nician.
WARNING
• BLIS is an information system, NOT awarning or safety system.
• BLIS does not eliminate the need foryou to visually confirm the conditionsaround you, and the need for you to turnyour head and shoulders to make surethat you can safely change lanes.
• As the driver, you have full responsibilityfor changing lanes in a safe manner.
The system is based on digital camera tech-nology. The cameras are located beneath theside-view mirrors.
When one (or both) of the cameras havedetected a vehicle in the blind area (up toapproximately 10 ft. (3 meters) from the side ofyour vehicle, and up to approximately 31 ft.(9.5 meters) behind the side-view mirror), seethe illustration, the indicator light in the doorpanel illuminates. The light will glow continu-ously to alert the driver of the vehicle in theblind area.
NOTE
The door panel indicator light illuminates onthe side of the vehicle where the system hasdetected another vehicle. If your vehicle ispassed on both sides at the same time, bothlights will illuminate.
BLIS has an integrated function that alerts thedriver if a fault should occur with the system.For example, if one or both of the system'scameras are obscured, a message (see thetable on page 186) will appear in the informa-tion display in the instrument panel. If thisoccurs, clean the camera lenses. If necessary,the system can be temporarily switched off (forinstructions, see page 185).
G02
1427
Areas monitored by BLIS Distance A = approx.31 ft. (9.5 meters), Distance B = approx. 10 ft.(3 meters)
04 Comfort and driving pleasure
Blind Spot Information System (option)
04
184
When does BLIS functionThe system functions when your vehicle ismoving at speeds above 6 mph (10 km/h).
When you pass another vehicle:The system reacts when you pass anothervehicle at a speed of up to 6 mph (10 km/h)faster than that vehicle.
When you are passed by another vehicle:The system reacts if your vehicle is passed byanother vehicle at a speed of up to 43 mph(70 km/h) faster than your vehicle.
WARNING
• BLIS does not function in sharp curves.
• BLIS does not function when your vehi-cle is backing up.
• If you are towing a wide trailer, this mayprevent the BLIS cameras from detect-ing other vehicles in adjacent lanes.
How BLIS functions in daylight anddarkness
DaylightBLIS reacts to the shape of surrounding vehi-cles. The system is designed to help detectmotor vehicles such as cars, trucks, buses,motorcycles, etc.
DarknessBLIS reacts to the headlights of surroundingvehicles. In order to be detected by BLIS, avehicle in the blind area must have its head-lights on. This means, for example, that thesystem will not detect a trailer without head-lights that is being towed behind a car or truck.
WARNING
• BLIS does not react to cyclists ormopeds.
• BLIS does not react to vehicles that arestanding still.
• The function of the BLIS cameras maybe affected by intense light, or whendriving at night in areas where there areno external sources of light (e.g., streetlights, other vehicles, etc.). In suchcases, the system may react as if thecameras were obscured.
• In both of the above mentioned condi-tions, a message will appear in the infor-mation display.
• When driving in such conditions, thesystem's function will be limited or itmay be temporarily switched off, seepage 185 for instructions.
• When the message is no longer dis-played, BLIS will return to normal func-tion.
• The BLIS cameras have the same limi-tation as the human eye. In other words,their "vision is impaired" by adverseweather conditions such as heavysnowfall, dense fog, etc.
04 Comfort and driving pleasure
Blind Spot Information System (option)
04
185
LimitationsIn certain situations, the BLIS indicator light(s)may illuminate even when there are no othervehicles in the area monitored by the system.
NOTE
If the BLIS indicator lights illuminate occa-sionally even when there are no other vehi-cles in the blind area, this does not indicatea fault in the system.
In the event of a fault, Blind spot syst.service required will be displayed.
The following are several examples of situa-tions in which the BLIS indicator light(s) mayilluminate even when there are no other vehi-cles in the area monitored by the system.
G02
1430
Light reflected from a wet road surface
G02
1431
The vehicle's own shadow against a large, light,smooth surface such as barriers between lanes ona highway
G02
1432
Sunlight directly in the camera when the sun is lowon the horizon
Cleaning the BLIS camera lensesIn order to function optimally, the BLIS cameralenses must be kept clean. They can be wipedclean with a soft cloth or wet sponge.
CAUTION
• Clean the lenses carefully to avoidscratching.
• The lenses are electrically heated tohelp melt ice or snow. If necessary, gen-tly brush away snow from the lenses.
Switching BLIS on and off
G02
1428
BLIS is automatically activated when the igni-tion is switched on. The indicator lights willprovide confirmation by flashing 3 times.
• The system can be switched off by press-ing the BLIS button in the center console(see the illustration). The indicator light inthe button goes out when the system is
04 Comfort and driving pleasure
Blind Spot Information System (option)
04
186
switched off, and a text message is dis-played.
• BLIS can be switched on again by pressingthe button. The indicator light in the buttonwill illuminate and a new text message willbe displayed. Press the READ button (seepage 121) to erase the message.
BLIS system messages
Text in the dis-play
System status
Blind spot syst.service required
BLIS not functioningproperly. Contact anauthorized Volvoservice technician.
Blind spot syst.camera blocked
BLIS cameraobscured. Clean thelenses.
Blind-spot infosystem ON
BLIS system on
Text in the dis-play
System status
Blind-spot infosystem off
BLIS system off
Blind spot syst.reduced function
The BLIS cameras'function has beenreduced by e.g., fog,or strong sunlightdirectly into thecamea. The camerawill reset itself whenthese conditionshave changed. havebeen functionreduced
04 Comfort and driving pleasure
Passenger compartment convenience
04
187
Storage spaces
G02
4158
04 Comfort and driving pleasure
Passenger compartment convenience
04
188
Compartment in door panel
Storage pocket on the front edge of thefront seat cushions
Glove compartment
Storage compartment, 12-volt socket andAUX input
Jacket holder
Rear seat cup holders
Storage pocket
Jacket holderThe jacket hanger is located on the inboardside of the front passenger's seat headrestraint. It is only intended for hanging lightgarments.
Tunnel console
G02
1436
Storage compartment (for CDs, etc.) underarmrest.
Includes cup holder for driver and passen-ger, 12 V socket and small storage com-partment.
Cigarette lighter and ashtray (option)Your Volvo retailer has lighters and ashtraysavailable as accessories.
Glove compartment
A B
G02
1437
The owner's manual and maps can be kepthere. There are also holders for pens and fuelcards. The glove compartment can be lockedmanually with the key blade, see page 61.
04 Comfort and driving pleasure
Passenger compartment convenience
04
189
Vanity mirror
G02
1438
Vanity mirror with lighting
The light comes on automatically when thecover is lifted.
12-volt sockets
G02
1439
12-volt socket in the front tunnel console
G02
1440
12-volt socket in the rear center console
The electrical socket can be used for 12-voltaccessories such as cell phone chargers andcoolers. The maximum current is 10 A. For the
socket to supply current, the ignition must bein at least mode I, see page 78.
WARNING
Always keep the sockets covered when notin use.
04 Comfort and driving pleasure
Passenger compartment convenience–S80 Executive
04
190
Refrigerator
G02
1857
The refrigerator is located behind the rear cen-ter armrest and has a volume of 12.2 qts.(11.5 liters). It functions when the engine is run-ning or when the ignition is in mode II
WARNING
Bottles kept in the refrigerator should befirmly sealed and the refrigerator's doormust be securely closed while the vehicle isin motion.
NOTE
The refrigerator requires free air circulationin order to function at its best. At least2 inches (5 cm) of free space should be leftaround the refrigerator's air intake in thetrunk.
Carpet in the trunk
G02
1858
If the vehicle is equipped with a refrigerator, therear seat backrests must be folded downslightly before the carpet on the floor of thetrunk can be removed, see page 82.
Glasses
G02
1859
There is a storage compartment under thecover in the rear center armrest for two glassesand a bottle opener.
WARNING
Keep the glasses in their storage compart-ment when not in use or in the cup holdersprovided. The cover on the armrest shouldbe closed when the vehicle is in motion.
04 Comfort and driving pleasure
04
191
192
Driving recommendations..................................................................... 194Refueling............................................................................................... 198Loading................................................................................................. 202Towing a trailer...................................................................................... 205Emergency towing................................................................................ 207
05DURING YOUR TRIP
05 During your trip
Driving recommendations
05
194
General information
Economical driving conserves naturalresourcesBetter driving economy may be obtained bythinking ahead, avoiding rapid starts and stopsand adjusting the speed of your vehicle toimmediate traffic conditions.
Observe the following rules:
• Bring the engine to normal operating tem-perature as soon as possible by drivingwith a light foot on the accelerator pedal forthe first few minutes of operation. A coldengine uses more fuel and is subject toincreased wear.
• Whenever possible, avoid using the vehiclefor driving short distances. This does notallow the engine to reach normal operatingtemperature.
• Drive carefully and avoid rapid accelerationand hard braking.
• Use the transmission's Drive (D) positionas often as possible and avoid using kick-down.
• Do not exceed posted speed limits.
• Avoid carrying unnecessary items (extraload) in the vehicle.
• Maintain correct tire pressure. Check tirepressure regularly (when tires are cold).
• Remove snow tires when threat of snow orice has ended.
• Note that roof racks, ski racks, etc,increase air resistance and also fuel con-sumption.
• At highway driving speeds, fuel consump-tion will be lower with the air conditioningon and the windows closed than with theair conditioning off and the windows open.
• Using the onboard trip computer's fuelconsumption modes can help you learnhow to drive more economically.
Other factors that decrease gas mileageare:
• Dirty air cleaner
• Dirty engine oil and clogged oil filter
• Dragging brakes
• Incorrect front end alignment
Some of the above mentioned items and othersare checked at the standard maintenanceintervals.
WARNING
Driving with the trunk open: Driving withthe trunk open could lead to poisonousexhaust gases entering the passenger com-partment. If the trunk must be kept open forany reason, proceed as follows:
• Close the windows
• Set the ventilation system control to airflow to floor, windshield and side win-dows and the blower control to its high-est setting.
Weight distribution affects handlingAt the specified curb weight your vehicle has atendency to understeer, which means that thesteering wheel has to be turned more thanmight seem appropriate for the curvature of abend. This ensures good stability and reducesthe risk of rear wheel skid. Remember thatthese properties can alter with the vehicle load.The heavier the load in the trunk, the less thetendency to understeer.
Handling, roadholdingVehicle load, tire design and inflation pressureall affect vehicle handling. Therefore, checkthat the tires are inflated to the recommendedpressure according to the vehicle load. See the"Tire pressure" section. Loads should be dis-tributed so that capacity weight or maximumpermissible axle loads are not exceeded.
05 During your trip
Driving recommendations
05
195
Driving through water• The vehicle can be driven through water up
to a depth of approximately 10 in. (25 cm),at a maximum speed of 6 mph (10 km/h).
• Take particular care when driving throughflowing water.
• Clean the electrical connections for trailerwiring after driving in mud or water.
• When driving through water, maintain lowspeed and do not stop in the water.
WARNING
After driving through water, press lightly onthe brake pedal to ensure that the brakesare functioning normally. Water or mud canmake the brake linings slippery, resulting indelayed braking effect.
CAUTION
• Engine damage will occur if water isdrawn into the air cleaner.
• If the vehicle is driven through waterdeeper than 10 in (25 cm), water mayenter the differential and the transmis-sion. This reduces the oil's lubricatingcapacity and may shorten the servicelife of these components.
• Do not allow the vehicle to stand inwater up to the door sills longer thanabsolutely necessary. This could resultin electrical malfunctions.
• If the engine has been stopped while thevehicle is in water, do not attempt torestart it. Have the vehicle towed out ofthe water.
Engine and cooling systemUnder special conditions, for example whendriving in hilly terrain, extreme heat or withheavy loads, there is a risk that the engine andcooling system will overheat. Proceed as fol-lows to avoid overheating the engine.
• Maintain a low speed when driving with atrailer up long, steep hills.
• Do not turn the engine off immediatelywhen stopping after a hard drive.
WARNING
The cooling fan may start or continue tooperate (for up to 6 minutes) after the enginehas been switched off.
• Remove any auxiliary lights from in front ofthe grille when driving in hot weather con-ditions.
• Do not exceed engine speeds of 4500 rpmif driving with a trailer in hilly terrain. The oiltemperature could become too high.
Conserving electrical currentKeep the following in mind to help minimizebattery drain:
• When the engine is not running, avoidusing ignition mode II. Many electrical sys-tems (the audio system, the optional navi-gation system, power windows, etc) willfunction in ignition modes 0 and I. Thesemodes reduce drain on the battery.
• Please keep in mind that using systems,accessories, etc., that consume a greatdeal of current when the engine is not run-ning could result in the battery being com-pletely drained.
• The optional 12 volt socket in the trunkprovides electrical current even with theignition switched off, which drains the bat-tery.
05 During your trip
Driving recommendations
05
196
Before a long distance tripIt is always worthwhile to have your vehiclechecked by a trained and qualified Volvo serv-ice technician before driving long distances.Your retailer will also be able to supply you withbulbs, fuses, spark plugs and wiper blades foryour use in the event that problems occur.
As a minimum, the following items should bechecked before any long trip:
• Check that engine runs smoothly and thatfuel consumption is normal.
• Check for fuel, oil, and fluid leakage
• Have the transmission oil level checked.
• Check condition of drive belts.
• Check state of the battery's charge.
• Examine tires carefully (the spare tire aswell), and replace those that are worn.Check tire pressures.
• The brakes, front wheel alignment, andsteering gear should be checked by atrained and qualified Volvo service techni-cian only.
• Check all lights, including high beams.
• Reflective warning triangles are legallyrequired in some states/provinces.
• Have a word with a trained and qualifiedVolvo service technician if you intend todrive in countries where it may be difficultto obtain the correct fuel.
• Consider your destination. If you will bedriving through an area where snow or iceare likely to occur, consider snow tires.
Cold weather precautionsIf you wish to check your vehicle before theapproach of cold weather, the following adviceis worth noting:
• Make sure that the engine coolant contains50 percent antifreeze. Any other mixturewill reduce freeze protection. This givesprotection against freezing down to–31 °F (–35 °C). The use of "recycled" anti-freeze is not approved by Volvo. Differenttypes of antifreeze must not be mixed.
• Volvo recommends using only genuineVolvo antifreeze in your vehicle's radiator.
• Try to keep the fuel tank well filled – thishelps prevent the formation of condensa-tion in the tank. In addition, in extremelycold weather conditions it is worthwhile toadd fuel line de-icer before refueling.
• The viscosity of the engine oil is important.Oil with low viscosity (thinner oil) improvescold-weather starting as well as decreas-ing fuel consumption while the engine iswarming up. For winter use, 5W-30 oil, par-ticularly the synthetic type, is recom-mended. Be sure to use good quality oil butdo not use cold-weather oil for hard drivingor in warm weather, see page 274 for moreinformation on engine oil.
NOTE
Synthetic oil is not used when the oil ischanged at the normal maintenance inter-vals except at owner request and at addi-tional charge.
• The load placed on the battery is greaterduring the winter since the windshield wip-ers, lighting, etc. are used more often.Moreover, the capacity of the batterydecreases as the temperature drops. Invery cold weather, a poorly charged bat-tery can freeze and be damaged. It is there-fore advisable to check the state of chargemore frequently and spray an anti-rust oilon the battery posts.
• Volvo recommends the use of snow tireson all four wheels for winter driving, seepage 251.
• To prevent the washer fluid reservoir fromfreezing, add washer solvents containingantifreeze. This is important since dirt isoften splashed on the windshield duringwinter driving, requiring the frequent use ofthe washers and wipers. Volvo WasherSolvent should be diluted as follows: Downto 14 °F (–10 °C): 1 part washer solvent and4 parts water Down to 5 °F (–15 °C): 1 partwasher solvent and 3 parts water Down to0 °F (–18 °C): 1 part washer solvent and
05 During your trip
Driving recommendations
05
197
2 parts water Down to –18 °F (–28 °C):1 part washer solvent and 1 part water.
• Use Volvo Teflon Lock Spray in the locks.
• Avoid using de-icing sprays as they cancause damage to the locks.
05 During your trip
Refueling
05
198
Fuel requirements
Deposit control gasoline (detergentadditives)Volvo recommends the use of detergent gas-oline to control engine deposits. Detergentgasoline is effective in keeping injectors andintake valves clean. Consistent use of depositcontrol gasolines will help ensure good driva-bility and fuel economy. If you are not surewhether the gasoline contains deposit controladditives, check with the service station oper-ator.
NOTE
Volvo does not recommend the use ofexternal fuel injector cleaning systems.
Unleaded fuelEach Volvo has a three-way catalytic converterand must use only unleaded gasoline. U.S. andCanadian regulations require that pumps deliv-ering unleaded gasoline be labelled "UNLEA-DED". Only these pumps have nozzles whichfit your vehicle's filler inlet. It is unlawful to dis-pense leaded fuel into a vehicle labelled"unleaded gasoline only". Leaded gasolinedamages the three-way catalytic converter andthe heated oxygen sensor system. Repeateduse of leaded gasoline will lessen the effec-
tiveness of the emission control system andcould result in loss of emission warranty cov-erage. State and local vehicle inspection pro-grams will make detection of misfueling easier,possibly resulting in emission test failure formisfueled vehicles.
NOTE
Some U.S. and Canadian gasolines containan octane enhancing additive called methyl-cyclopentadienyl manganese tricarbonyl(MMT). If such fuels are used, your EmissionControl System performance may be affec-ted, and the Check Engine Light (malfunc-tion indicator light) located on your instru-ment panel may light. If this occurs, pleasereturn your vehicle to a trained and qualifiedVolvo service technician for service.
Gasoline containing alcohol and ethers,"Oxygenated fuels"Some fuel suppliers sell gasoline containing"oxygenates" which are usually alcohols orethers. In some areas, state or local lawsrequire that the service pump be marked indi-cating use of alcohols or ethers. However,there are areas in which the pumps areunmarked. If you are not sure whether there isalcohol or ethers in the gasoline you buy, checkwith the service station operator. To meet sea-
sonal air quality standards, some areas requirethe use of "oxygenated" fuel.
Volvo allows the use of the following "oxygen-ated" fuels; however, the octane ratings listedon page 199 must still be met.
Alcohol – EthanolFuels containing up to 10% ethanol by volumemay be used. Ethanol may also be referred toas Ethyl alcohol, or "Gasohol".
Ethers – MTBE: Fuels containing up to15% MTBE may be used.
MethanolDo not use gasolines containing methanol(methyl alcohol, wood alcohol). This practicecan result in vehicle performance deteriorationand can damage critical parts in the fuel sys-tem. Such damage may not be covered underthe New Vehicle Limited Warranty.
05 During your trip
Refueling
05
199
Octane rating
Minimum octane
G02
8920
Typical pump octane label
Volvo recommends premium fuel for best per-formance, but using 87 octane or above will notaffect engine reliability.
Volvo engines are designed to achieve ratedhorsepower, torque, and fuel economy per-formance using premium 91 octane fuel.
Demanding drivingIn demanding driving conditions, such as oper-ating the vehicle in hot weather, towing a trailer,or driving for extended periods at higher alti-tudes than normal, it may be advisable toswitch to higher octane fuel (91 or higher) or tochange gasoline brands to fully utilize your
engine's capacity, and for the smoothest pos-sible operation.
NOTE
When switching to higher octane fuel orchanging gasoline brands, it may be neces-sary to fill the tank more than once before adifference in engine operation is noticeable.
Fuel FormulationsDo not use gasoline that contains lead as aknock inhibitor, and do not use lead additives.Besides damaging the exhaust emission con-trol systems on your vehicle, lead has beenstrongly linked to certain forms of cancer.
Many fuels contain benzene as a solvent.Unburned benzene has been strongly linked tocertain forms of cancer. If you live in an areawhere you must fill your own gas tank, takeprecautions. These may include:
• standing upwind away from the filler nozzlewhile refueling
• refueling only at gas stations with vaporrecovery systems that fully seal the mouthof the filler neck during refueling
• wearing neoprene gloves while handling afuel filler nozzle.
Use of AdditivesWith the exception of gas line antifreeze duringwinter months, do not add solvents, thicken-ers, or other store-bought additives to yourvehicle's fuel, cooling, or lubricating systems.Overuse may damage your engine, and someof these additives contain organically volatilechemicals. Do not needlessly expose yourselfto these chemicals.
WARNING
Never carry a cell phone that is switchedon while refueling your vehicle. If the phonerings, this may cause a spark that couldignite gasoline fumes, resulting in fire andinjury.
WARNING
Carbon monoxide is a poisonous, colorless,and odorless gas. It is present in all exhaustgases. If you ever smell exhaust fumesinside the vehicle, make sure the passengercompartment is ventilated, and immediatelyreturn the vehicle to a trained and qualifiedVolvo service technician for correction.
05 During your trip
Refueling
05
200
Opening/closing the fuel filler door
G02
2914
The fuel filler door is located on the right rearfender (indicated by an arrow beside the fueltank symbol on the information display )
With the ignition switched off, press the buttonon the lighting panel to unlock the fuel fillerdoor. Please note that the fuel filler door willremain unlocked until the vehicle begins tomove forward. An audible click will be heardwhen the fuel filler door relocks.
• If you intend to leave your vehicle while itis being refueled, this feature enables youto lock the doors/trunk while leaving thefuel filler door unlocked.
• You can also keep the vehicle locked if youremain inside it during refueling. The cen-tral locking button does not lock the fuelfiller door.
• Be sure the fuel filler door is not obstructedand is completely closed after refueling.
• Open the fuel filler cap slowly during hotweather.
Close the fuel filler door by pressing it a clickindicates that it is closed.
CAUTION
• Avoid spilling gasoline during refueling.In addition to causing damage to theenvironment, gasolines containingalcohol can cause damage to paintedsurfaces, which may not be coveredunder the New Vehicle Limited War-ranty.
Manually opening the fuel filler door
G02
4631
If necessary, the fuel filler door can be openedmanually:
1. Open the side hatch in the trunk (on thesame side as the fuel filler door).
2. Grasp the green cord with a handle.
3. Pull the cord straight rearward until the fuelfiller door clicks open.
Opening/closing the fuel cap
G02
2915
Fuel vapor expands in hot weather. Open thefiller cap slowly.
After refueling, close the fuel filler cap by turn-ing it clockwise until it clicks into place.
05 During your trip
Refueling
05
201
CAUTION
• Do not refuel with the engine running1.Turn the ignition off or to position I. If theignition is on, an incorrect reading couldoccur in the fuel gauge.
• Avoid overfilling the fuel tank. Do notpress the handle on the filler nozzlemore than one extra time. Too muchfuel in the tank in hot weather conditionscan cause the fuel to overflow. Overfill-ing could also cause damage to theemission control systems.
Emission controls
Three-way catalytic converter• Keep your engine properly tuned. Certain
engine malfunctions, particularly involvingthe electrical, fuel or distributor ignitionsystems, may cause unusually high three-way catalytic converter temperatures. Donot continue to operate your vehicle if youdetect engine misfire, noticeable loss ofpower or other unusual operating condi-tions, such as engine overheating or back-firing. A properly tuned engine will help
avoid malfunctions that could damage thethree-way catalytic converter.
• Do not park your vehicle over combustiblematerials, such as grass or leaves, whichcan come into contact with the hot exhaustsystem and cause such materials to igniteunder certain wind and weather condi-tions.
• Excessive starter cranking (in excess ofone minute), or an intermittently firing orflooded engine can cause three-way cata-lytic converter or exhaust system over-heating.
• Remember that tampering or unauthorizedmodifications to the engine, the EngineControl Module, or the vehicle may be ille-gal and can cause three-way catalytic con-verter or exhaust system overheating. Thisincludes: altering fuel injection settings orcomponents, altering emission systemcomponents or location or removing com-ponents, and/or repeated use of leadedfuel.
NOTE
Unleaded fuel is required for vehicles withthree-way catalytic converters.
Heated oxygen sensorsThe heated oxygen sensors monitor the oxy-gen content of the exhaust gases. Readingsare fed into a control module that continuouslymonitors engine functions and controls fuelinjection. The ratio of fuel to air into the engineis continuously adjusted for efficient combus-tion to help reduce harmful emissions.
1 If the fuel filler cap is not closed tightly or if the engine is running when the vehicle is refueled, the Check Engine Light (malfunction indicator lamp) may indicate a fault. However, your vehicle'sperformance will not be affected. Use only Volvo original or approved fuel filler caps.
05 During your trip
Loading
05
202
IntroductionThe load carrying capacity of your vehicle isdetermined by factors such as the number ofpassengers, the amount of cargo, the weightof any accessories that may be installed, etc.
To increase loading space, the rear seat backr-ests can be folded down, See page 82.
When loading the trunk, keep the following inmind:
The trunk lid can be unlocked an pop-ped open slightly via the button
located on the lighting panel, see page 62.
• Load objects in the trunk against the back-rest whenever possible.
• Unstable loads can be secured to the loadanchoring eyelets with straps or web lash-ings to help keep them from shifting.
• Stop the engine and apply the parkingbrake when loading or unloading longobjects. The gear selector can be knockedout of position by long loads, which couldset the vehicle in motion.
WARNING
• Stop the engine, put the gear selector inP, and apply the parking brake whenloading or unloading long objects.
• The vehicle's driving characteristicsmay change depending on the weightand distribution of the load.
• A 44-pound (20 kg) object produces aforce of 2,200 pounds (1,000 kg) in aheadon collision at 30 mph (50 km/h).
• The rear seat should not be loaded to alevel higher than 2 in. (5 cm) below theupper edge of the rear side windows.Objects placed higher than this levelcould impede the function of the VolvoInflatable Curtain.
Load anchoring eyelets
G02
1462
The load anchoring eyelets on both sides of thevehicle are used to fasten straps, etc., to helpanchor items in the trunk.
05 During your trip
Loading
05
203
WARNING
• Cover sharp edges on long loads to helpprevent injury to occupants. Secure theload to help prevent shifting during sud-den stops.
• Always secure large and heavy objectswith a seat belt or cargo retainingstraps.
• Always secure the load to help preventit from moving in the event of suddenstops.
• Switch off the engine, apply the parkingbrake and put the gear selector in Pwhen loading and unloading the vehicle.
Grocery bag holder1 (option)
G02
1463
Grocery bag holder under the floor of the trunk
The grocery bag holder holds shopping bagsin place.
1. Open the hatch in the floor of the trunk.
2. Secure the shopping bags with the strap.
Ski hatch
1 Available on certain markets only.
05 During your trip
Loading
05
204
There is a hatch in the right section of the rearseat backrest that can be opened for transpor-tation.
Fold the right backrest forward.
Release the hatch in the rear seat backrestby sliding the catch up while folding thehatch forward.
Return the backrest to the upright positionwith the hatch open.
Use the seat belt to prevent the load from mov-ing.
WARNING
• Always secure the load to help preventit from moving in the event of suddenbraking.
• Switch off the engine, apply the parkingbrake and put the gear selector in Pwhen loading and unloading the vehicle.
NOTE
If the vehicle is equipped with the optionalintegrated booster cushion, fold it out first.
The cover on the rear seat armrest/child seathas no hinge. The cover must be removedbefore the ski hatch is used.
Removal:
Open the cover 30 degrees and lift straightup.
Installation:
Insert the cover in the grooves behind theupholstery and close the cover.
Roof loads
Using load carriersLoad carriers are available as Volvo accesso-ries. Observe the following points when in use:
• To avoid damaging your vehicle and toachieve maximum safety when driving, werecommend using the load carriers thatVolvo has developed especially for yourvehicle.
• Volvo-approved removable roof racks aredesigned to carry the maximum allowableroof load for this vehicle: 220 lbs (100 kg).For non-Volvo roof racks, check the man-ufacturer's weight limits for the rack.
• Never exceed the rack manufacturer'sweigh limits and never exceed the maxi-mum rated roof load of 220 lbs (100 kg).
• Avoid single-point loads. Distribute loadsevenly.
• Place heavier cargo at the bottom of theload.
• Secure the cargo correctly with appropri-ate tie-down equipment.
• Check periodically that the load carriersand load are properly secured.
• Remember that the vehicle's center ofgravity and handling change when youcarry a load on the roof.
• The vehicle's wind resistance and fuel con-sumption will increase with the size of theload.
• Drive smoothly. Avoid rapid starts, fastcornering and hard braking.
05 During your trip
Towing a trailer
05
205
IntroductionVolvo recommends the use of Volvo trailerhitches that are specially designed for the vehi-cle.
NOTE
See page 272 for the maximum trailer andtongue weights recommended by Volvo.
• Observe the legal requirements of thestate/province in which the vehicles are
• All Volvo models are equipped withenergy-absorbing shock-mounted bump-ers. Trailer hitch installation should notinterfere with the proper operation of thisbumper system.
Trailer towing does not normally present anyparticular problems, but take into considera-tion:
• Increase tire pressure to recommendedfull. See the tire inflation tables on pages246 and 247.
• When your vehicle is new, avoid towingheavy trailers during the first 620 miles(1,000 km).
• Maximum speed when towing a trailer:50 mph (80 km/h).
• Engine and transmission are subject toincreased loads. Therefore, engine coolanttemperature should be closely watched
when driving in hot climates or hilly terrain.Use a lower gear and turn off the air con-ditioner if the temperature gauge needleenters the red range.
• If the automatic transmission begins tooverheat, a message will be displayed inthe text window.
• Avoid overload and other abusive opera-tion.
• Hauling a trailer affects handling, durabil-ity, and economy.
• It is necessary to balance trailer brakeswith the towing vehicle brakes to provide asafe stop (check and observe state/localregulations).
• Do not connect the trailer's brake systemdirectly to the vehicle's brake system.
• More frequent vehicle maintenance isrequired.
• Remove the ball and drawbar assemblywhen the hitch is not being used.
• Volvo recommends the use of syntheticengine oil when towing a trailer over longdistances or in mountainous areas.
WARNING
• Bumper-attached trailer hitches mustnot be used on Volvos, nor shouldsafety chains be attached to thebumper.
• Trailer hitches attaching to the vehiclerear axle must not be used.
• Never connect a trailer's hydraulicbrake system directly to the vehiclebrake system, nor a trailer's lightingsystem directly to the vehicle lightingsystem. Consult your nearest author-ized Volvo retailer for correct installa-tion.
• When towing a trailer, the trailer's safetywire must be correctly fastened to thehole or hook provided in the trailer hitchon the vehicle. The safety wire shouldnever be fastened to or wound aroundthe drawbar ball.
05 During your trip
Towing a trailer
05
206
NOTE
• When parking the vehicle with a traileron a hill, apply the parking brake beforeputting the gear selector in P. Alwaysfollow the trailer manufacturer's recom-mendations for wheel chocking.
• When starting on a hill, put the gearselector in D before releasing the park-ing brake. See also page 115 for moredetailed information about starting offon a hill while towing a trailer.
• If you use the manual (Geartronic) shiftpositions while towing a trailer, makesure the gear you select does not puttoo much strain on the engine (using toohigh a gear).
• The drawbar assembly/trailer hitch maybe rated for trailers heavier than thevehicle is designed to tow. Pleaseadhere to Volvo's recommended trailerweights.
• Avoid driving with a trailer on inclines ofmore than 15 %.
Trailer cableAn adapter is required if the vehicle's trailerhitch has a 13-pin connector and the trailer has7 pins. Use an adapter cable approved byVolvo. Make sure the cable does not drag onthe ground.
Detachable trailer hitch (accessory)
A
C
EDB
G01
0496
Ball holder
Locking bolt
Cotter pin
Hitch assembly
Safety wire attachment
Installing the ball holder1. If necessary, remove the cotter pin from
the locking bolt and slide the locking boltout of the hitch assembly.
2. Slide the ball holder into the hitch assem-bly.
3. Align the hole in the ball holder with the onein the hitch assembly.
4. Slide the locking bolt through the hitchassembly/ball holder.
5. Insert the cotter pin in the hole at the endof the locking bolt.
Removing the ball holder1. Remove the cotter pin from the locking bolt
and slide the locking bolt out of the ballholder/hitch assembly.
2. Pull the ball holder out of the hitch assem-bly.
NOTE
A cover for the hitch assembly is alsoincluded in the kit.
05 During your trip
Emergency towing
05
207
Towing eyelet
G02
1500
G02
1501
Attaching the towing eyelet
The towing eyelet is located under the floor ofthe trunk, with the spare tire. This eyelet mustbe screwed into the positions provided on theright sides of either the front or rear bumper(see illustration).
CAUTION
If the vehicle is being towed on a flat bedtruck, the towing eyelets must not be usedto pull the vehicle up onto the flat bed.
NOTE
On certain models equipped with a trailerhitch, the towing eyelet cannot be screwedinto the hole in the rear bumper. The towingrope should be attached to the trailer hitchinstead. For this reason, the detachablesection of the trailer hitch should be safelystowed in the vehicle at all times.
Attaching the towing eyeletUse a coin to pry open the lower edge ofthe cover.
Screw the towing eyelet in place, first byhand and then using the tire iron until it issecurely in place.
WARNING
Do not use the towing eyelets to pull thevehicle up onto a flat bed tow truck.
After the vehicle has been towed, the eyeletshould be removed and returned to its storagelocation.
Press the cover for the attachment pointback into position.
WARNING
If the vehicle has no electrical current andmust be towed, the power steering andbrake systems will not function normally. Itwill still be possible to steer the vehicle andapply the brakes. However, keep in mindthat greater effort will be required to turn thesteering wheel and depress the brake pedal.
Precautions when the vehicle is in tow• The steering wheel must be unlocked. The
remote key must be in the ignition slot1.
• Attach jumper cables (see page 107) toprovide current for releasing the optionalelectric parking brake and to move the gearselector from the P position.
• The gear selector must be in position N.
• Maximum speed: 50 mph (80 km/h). Do notexceed the maximum allowable towingspeed.
• Maximum distance with front wheels onground: 50 miles (80 km).
1 On vehicles with the optional keyless drive, the remote key must be in the passenger compartment.
05 During your trip
Emergency towing
05
208
• While the vehicle is being towed, try tokeep the tow rope taut at all times.
• The vehicle should only be towed in theforward direction.
NOTE
During towing, ignition mode II should beused so that the lighting can be switched on.
CAUTION
Vehicles with AWD (All Wheel Drive) with thefront wheels off the ground should not betowed at speeds about 50 mph (70 km/h) orfor distances longer than 30 miles (50 km).
CAUTION
• Please check with state and localauthorities before attempting this typeof towing, as vehicles being towed aresubject to regulations regarding maxi-mum towing speed, length and type oftowing device, lighting, etc.
• If the vehicle's battery is dead, do notattempt to start the vehicle by pushingor pulling it as this will damage thethree-way catalytic converter(s). Theengine must be jump started using anauxiliary battery (see page 107).
• If the vehicle is being towed on a flat bedtruck, the towing eyelets must not beused to pull the vehicle up onto the flatbed or to secure the vehicle on the flatbed. Consult the tow truck operator.
Towing vehicles with front wheel drive/All Wheel DriveVolvo recommends the use of flat bed equip-ment.
• If wheel lift equipment must be used,please use extreme caution to help avoiddamage to the vehicle. In this case, thevehicle should be towed with the rearwheels on the ground if at all possible.
• If it is absolutely necessary to tow the vehi-cle with the front wheels on the ground,
please refer to the towing information onpage 207.
CAUTION
• Sling-type equipment applied at thefront will damage radiator and air con-ditioning lines.
• It is equally important not to use sling-type equipment at the rear or apply lift-ing equipment inside the rear wheels;serious damage to the rear axle mayresult.
• If the vehicle is being towed on a flat bedtruck, the towing eyelets must not beused to secure the vehicle on the flatbed. Consult the tow truck operator.
05 During your trip
05
209
G020922
210
Volvo maintenance................................................................................ 212Maintaining your car.............................................................................. 213Hood and engine compartment............................................................ 215Engine oil............................................................................................... 216Fluids..................................................................................................... 218Replacing bulbs.................................................................................... 220Wiper blades and washer fluid.............................................................. 228Battery................................................................................................... 230Fuses..................................................................................................... 233Wheels and tires.................................................................................... 242Vehicle care........................................................................................... 264Label information.................................................................................. 269Specifications........................................................................................ 271Volvo programs..................................................................................... 278
06MAINTENANCE AND SPECIF ICATIONS
06 Maintenance and specifications
Volvo maintenance
06
212
IntroductionVolvo advises you to follow the maintenanceprogram outlined in the Warranty and ServiceRecords Information booklet. This mainte-nance program contains inspections and serv-ices necessary for the proper function of yourvehicle. The maintenance services containseveral checks that require special tools andtraining, and therefore must be performed by aqualified technician. To keep your Volvo in topcondition, specify time-tested and provenGenuine Volvo Parts and Accessories.
The Federal Clean Air Act – U.SThe Federal Clean Air Act requires vehiclemanufacturers to furnish written instructions tothe ultimate purchaser to assure the properservicing and function of the components thatcontrol emissions. These services, which arelisted in the "Warranty and Service RecordsInformation" booklet, are not covered by thewarranty. You will be required to pay for laborand material used.
MaintenanceYour Volvo passed several major inspectionsbefore it was delivered to you, in accordancewith Volvo specifications. The maintenanceprocedures outlined in the Warranty and Serv-ice Records Information booklet, many ofwhich will positively affect your vehicle's emis-sions, should be performed as indicated. It is
recommended that receipts for vehicle emis-sion maintenance be retained in case ques-tions arise concerning maintenance. Inspec-tion and maintenance should also beperformed anytime a malfunction is observedor suspected.
Applicable warranties – U.S/CanadaIn accordance with applicable U.S. and Cana-dian regulations, the following list of warrantiesis provided.
• New Vehicle Limited Warranty
• Parts and Accessories Limited Warranty
• Corrosion Protection Limited Warranty
• Seat Belt and Supplemental Restraint Sys-tems Limited Warranty
• Emission Design and Defect Warranty
• Emission Performance Warranty
These are the federal warranties; other warran-ties are provided as required by state/provin-cial law. Refer to your separate Warranty andService Records Information booklet fordetailed information concerning each of thewarranties.
Periodic maintenance helps minimizeemissionsPeriodic maintenance will help keep your vehi-cle running well. Your Warranty and ServiceRecords Information booklet provides a com-
prehensive periodic maintenance schedule upto 150,000 miles (240,000 km) of vehicle main-tenance. The schedule includes componentsthat affect vehicle emissions. This pagedescribes some of the emission-related com-ponents.
Vehicle Event Data (Black Box)Your vehicle's driving and safety systemsemploy computers that monitor, and sharewith each other, information about your vehi-cle's operation. One or more of these comput-ers may store what they monitor, either duringnormal vehicle operation or in a crash or near-crash event. Stored information may be readand used by:
• Volvo Car Corporation
• service and repair facilities
• law enforcement or government agencies
• others who may assert a legal right toknow, or who obtain your consent to knowsuch information.
06 Maintenance and specifications
Maintaining your car
06
213
Owner maintenancePeriodic maintenance requirements and inter-vals are described in your vehicle's Warrantyand Service Records Information booklet.
The following points can be carried outbetween the normally scheduled maintenanceservices.
Each time the car is refueled:• Check the engine oil level.
• Clean the windshield, windshield wipers,headlights, and tail lights.
Monthly:• Check cold tire pressure in all tires. Inspect
the tires for wear.
• Check that engine coolant and other fluidlevels are between the indicated "min" and"max" markings.
• Clean interior glass surfaces with a glasscleaner and soft paper towels.
• Wipe driver information displays with a softcloth.
• Visually inspect battery terminals for cor-rosion. Corrosion may indicate a loose ter-minal connector, or a battery near the endof its useful service life. Consult your Volvoretailer for additional information.
As needed:Wash the car, including the undercarriage, toreduce wear that can be caused by a buildupof dirt, and corrosion that can be caused by saltresidues.
Clean leaves and twigs from air intake vents atthe base of the windshield, and from other pla-ces where they may collect.
NOTE
Complete service information for qualifiedtechnicians is available online for purchaseor subscription at www.volvotechinfo.com.
Emission inspection readiness
What is an Onboard Diagnostic System(OBD II)?OBD II is part of your vehicle's computerizedengine management system. It stores diagnos-tic information about your vehicle's emissioncontrols. It can light the Check Engine light(MIL) if it detects an emission control "fault." A"fault" is a component or system that is notperforming within an expected range. A faultmay be permanent or temporary. OBD II willstore a message about any fault.
How do states use OBD II for emissioninspections?Many states connect a computer directly to avehicle's OBD II system. The inspector canthen read "faults." In some states, this type ofinspection has replaced the tailpipe emissiontest.
How can my vehicle fail OBD II emissioninspection?Your vehicle can fail OBD II emission inspec-tion for any of the following reasons.
• If your Check Engine (MIL) light is lit, yourvehicle may fail inspection.
• If your vehicle's Check Engine light was lit,but went out without any action on yourpart, OBD II will still have a recorded fault.Your vehicle may pass or fail, dependingon the inspection practices in your area.
• If you had recent service that required dis-connecting the battery, OBD II diagnosticinformation may be incomplete and "notready" for inspection. A vehicle that is notready may fail inspection.
How can I prepare for my next OBD IIemission inspection?• If your Check Engine (MIL) light is lit – or
was lit but went out without service, have
06 Maintenance and specifications
Maintaining your car
06
214
your vehicle diagnosed and, if necessary,serviced by a qualified Volvo technician.
• If you recently had service for a lit CheckEngine light, or if you had service thatrequired disconnecting the battery, aperiod of driving is necessary to bring theOBD II system to "ready" for inspection. Ahalf-hour trip of mixed stop-and-go/high-way driving is typically needed to allowOBD II to reach readiness. Your Volvoretailer can provide you with more infor-mation on planning a trip.
• Maintain your vehicle in accordance withyour vehicle's maintenance schedule.
06 Maintenance and specifications
Hood and engine compartment
06
215
Opening and closing the hood
G02
1502
G01
0951
Pull the lever located under the left side ofthe dash to release the hood lock.
Lift the hood slightly. Press the releasecontrol (located under the right front edgeof the hood) to the left, and lift the hood
WARNING
Check that the hood locks properly whenclosed.
Engine compartment, overview
G01
8945
The appearance of the engine compartmentmay vary depending on engine model.
Coolant expansion tank
Power steering fluid reservoir
Engine oil dipstick
Radiator
Filler cap for engine oil
Cover over brake fluid reservoir
Battery
Relay and fuse box
Washer fluid reservoir
Air cleaner
WARNING
The cooling fan may start or continue tooperate (for up to 6 minutes) after the enginehas been switched off.
WARNING
The ignition should always be completelyswitched off before performing any opera-tions in the engine compartment.
The distributor ignition system operates atvery high voltages. Special safety precau-tions must be followed to prevent injury.Always turn the ignition off when:
• Replacing distributor ignition compo-nents e.g. plugs, coil, etc.
• Do not touch any part of the distributorignition system while the engine is run-ning. This may result in unintendedmovements and body injury.
06 Maintenance and specifications
Engine oil
06
216
Checking the engine oilThe oil level should be checked every time thevehicle is refueled. This is especially importantduring the period up to the first scheduledmaintenance service.
• See page 274 for oil specifications.
• Refer to the Warranty and Service RecordsInformation booklet for information on theoil change intervals.
Volvo recommends Castrol oil products.
CAUTION
• Not checking the oil level regularly canresult in serious engine damage if the oillevel becomes too low.
• Oil that is lower than the specified qual-ity can damage the engine.
• Volvo does not recommend the use ofoil additives.
• Always add oil of the same type andviscosity as already used.
• Never fill oil above the MAX mark. Thiscould cause an increase in oil consump-tion.
Checking and adding oil
G02
1734
Location of the filler cap and dipstick
NOTE
Before checking the oil:
• The car should be parked on a level sur-face when the oil is checked.
• If the engine is warm, wait for at least10 – 15 minutes after the engine hasbeen switched off before checking theoil.
G02
1737
The oil level must be between the MIN and MAXmarks on the dipstick
Checking the oil1. Pull out the dipstick and wipe it with a lint-
free rag.
2. Reinsert the dipstick, pull it out, and checkthe oil level. The level must be between theMIN and MAX marks.
3. Add oil if necessary. If the level is close tothe MIN mark, add approximately0.5 US quarts (0.5 liters) of oil.
4. Recheck the level and add more oil if nec-essary until the level is near the MAX mark.
06 Maintenance and specifications
Engine oil
06
217
WARNING
Do not allow oil to spill onto or come intocontact with hot exhaust pipe surfaces.
NOTE
Synthetic oil is not used when the oil ischanged at the normal maintenance inter-vals except at owner request and at addi-tional charge. Please consult your Volvoretailer.
06 Maintenance and specifications
Fluids
06
218
Coolant
G02
1738
Location of the coolant reservoir
Normally, the coolant does not need to bechanged. If the system must be drained, con-sult a trained and qualified Volvo service tech-nician.
See page 276 for information on cooling sys-tem capacities.
CAUTION
• If necessary, top up the cooling systemwith Volvo Genuine Coolant/Antifreezeonly (a 50/50 mix of water and anti-freeze).
• Different types of antifreeze/coolantmay not be mixed.
• If the cooling system is drained, itshould be flushed with clean water orpremixed anti-freeze before it is refilledwith the correct mixture of water/anti-freeze.
• The cooling system must always bekept filled to the correct level, and thelevel must be between the MIN andMAX marks. If it is not kept filled, therecan be high local temperatures in theengine which could result in damage.Check coolant regularly!
• Do not top up with water only. Thisreduces the rust-protective and anti-freeze qualities of the coolant and has alower boiling point. It can also causedamage to the cooling system if itshould freeze.
• Do not use chlorinated tap water in thevehicles cooling system.
WARNING
• Never remove the radiator cap while theengine is warm. Wait until the vehiclecools.
• If it is necessary to top off the coolantwhen the engine is warm, unscrew theexpansion tank cap slowly so that theoverpressure dissipates.
Brake fluid
G02
1739
Location of the brake fluid reservoir
Checking the levelThe fluid reservoir is concealed under theround cover at the rear of the engine compart-ment. The round cover must be removed firstbefore the reservoir cap can be accessed.
06 Maintenance and specifications
Fluids
06
219
The brake fluid should always be between theMIN and MAX marks on the inside of the res-ervoir. Check, without removing the cap, thatthere is sufficient fluid in the reservoir.
Fluid type: DOT 4+ boiling point >536 °F
(280 °C), P/N 9437433
Replace: The fluid should be replaced accord-ing to the intervals specified in the Warrantyand Service Records Information booklet.
When driving under extremely hard conditions(mountain driving, etc), it may be necessary toreplace the fluid more often. Consult a trainedand qualified Volvo service technician.
Always entrust brake fluid changing to atrained and qualified Volvo service technician.
WARNING
If the fluid level is below the MIN mark in thereservoir or if a brake-related message isshown in the information display: DO NOTDRIVE. Have the car towed to a trained andqualified Volvo service technician and havethe brake system inspected.
Filling1. Turn and open the cover.
2. Unscrew the reservoir cap and fill the fluid.The level must be between the MIN andMAX marks.
Power steering fluid
G02
1740
Check the level frequently. The fluid does notrequire changing. The fluid level must bebetween the MIN and MAX marks. For capaci-ties and recommended fluid grade, seepage 276.
WARNING
If a problem should occur in the powersteering system or if the vehicle has no elec-trical current and must be towed, it is stillpossible to steer the vehicle. However, keepin mind that greater effort will be required toturn the steering wheel.
CAUTION
Keep the area around the power steeringfluid reservoir clean when checking.
06 Maintenance and specifications
Replacing bulbs
06
220
IntroductionAll bulb specifications are listed on page 226.The following bulbs should only be replaced bya trained and qualified Volvo service techni-cian:
• Dome lighting
• Reading lights
• Glove compartment lighting
• Turn signals in the door mirror
• Approach lighting in the door mirror
• Brake/fog/taillights
• Rear side parking lights
• Active Bi-Xenon and LED bulbs
NOTE
For information regarding any other bulbsnot mentioned in this section, please con-tact your Volvo retailer or a trained andauthorized Volvo service technician.
WARNING
• Active Bi-Xenon headlights (option) –due to the high voltage used by theseheadlights, these bulbs should only bereplaced by a trained and qualifiedVolvo service technician.
• Turn off the lights and remove theremote key from the ignition beforechanging any bulbs.
Headlight housing
G01
0479
G010325
WARNING
• The engine should not be running whenchanging bulbs.
• When changing in the headlight hous-ing, if the engine has been running justprior to replacing bulbs, please beaware that components in the enginecompartment will be hot.
The entire headlight housing must be lifted outwhen replacing all front bulbs (except for thefog lights).
06 Maintenance and specifications
Replacing bulbs
06
221
CAUTION
Never touch the glass of bulbs with your fin-gers. Grease and oils from your fingersvaporize in the heat and will leave a depositon the reflector, which will damage it.
NOTE
• Always switch off the ignition beforestarting to replace a bulb.
• The optional active Bi-Xenon head-light bulbs contain trace amounts ofmercury. These bulbs should always bedisposed of by a trained and qualifiedVolvo service technician.
Removing the headlight housing1. Switch off the ignition by pressing quickly
on the START/STOP ENGINE button andremove the remote key from the ignitionslot1.
2. (Upper illustration under "Headlight hous-ing")
Withdraw the headlight housing's lock-ing pins.
Pull the headlight housing straight out .
CAUTION
When disconnecting the connector, pull onthe connector itself and not on the wiring.
3. (Lower illustration under "Headlight hous-ing")
Unplug the wiring connector by holdingdown the clip with your thumb.
Pull out the connector with the otherhand.
4. Lift out the housing and place it on a softsurface to avoid scratching the lens.
5. Replace the defective bulb(s), seepage 226.
Reinserting the headlight housing1. Plug in the connector until it clicks into
place.
2. Reinstall the headlight housing and lockingpins. Check that they are correctlyinserted. The headlight housing must beproperly inserted and secured in placebefore the lighting is switched on or theremote key is inserted into the ignition slot.
3. Check that the lights function properly.
Removing the cover to access theheadlights and parking lights
G02
1745
NOTE
Before starting to replace a bulb, seepage 220.
1. Open the retaining clamp by pressing it tothe side.
2. Press down the clips on the upper edge ofthe cover and remove it.
Reinstall the cover in the reverse order.
1 Does not apply to vehicles with the optional keyless drive.
06 Maintenance and specifications
Replacing bulbs
06
222
Low beam, Halogen
G02
1746
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the cover over the bulbs.
3. Detach the bulb by pressing the upper sec-tion of the retaining spring downward andto the side.
4. Unplug the connector from the bulb.
5. Replace the bulb and reinsert it into theheadlight housing.
6. Put the cover back into position and rein-stall the headlight housing.
High beam, Halogen
G02
1747
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the cover over the bulbs (seepage 221).
3. Pull the bulb holder out of the headlighthousing.
4. Pull the defective bulb out of the socket.
5. Press the new bulb into the socket until itsnaps into place. It can only be secured inone position.
6. Return the bulb holder into position in theheadlight housing.
7. Put the cover back into position and rein-stall the headlight housing.
Extra high beam2
G02
1748
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the cover over the bulbs (seepage 221).
3. Remove the bulb by pressing the holderdownward.
4. Remove the connector from the bulb.
5. Insert a new bulb in the connector until itsnaps in place. It can only be inserted inone way.
6. Return the bulb holder into position in theheadlight housing.
7. Put the cover back into position and rein-stall the headlight housing.
2 Models with optional Active Bi-Xenon headlights only.
06 Maintenance and specifications
Replacing bulbs
06
223
Parking lights
G02
1749
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the cover over the bulbs (seepage 221).
3. To access the bulb, first remove the highbeam bulb.
4. Pull the wire to withdraw the bulb holder.
5. Remove the burned out bulb and install anew one. It can only be secured in oneposition.
6. Press the bulb holder into the socket andpress until it clicks into place.
7. Put the cover back into position and rein-stall the headlight housing.
Turn signals
G02
1750
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the round cover by pulling the tabuntil the cover comes off.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing itin slightly and turning out before pulling itout. Press a new bulb into the socket.
5. Press the bulb holder into the socket andpress until it clicks into place.
6. Press the cover until it clicks into position.
7. Reinstall the headlight housing.
Side marker lights
G02
1751
NOTE
Before starting to replace a bulb, seepage 220.
1. Remove the headlight housing from thevehicle (see page 220).
2. Remove the round cover.
3. Pull the wire to withdraw the bulb holder.
4. Pull out the burned out bulb and install anew one. It can only be secured in oneposition.
5. Press the bulb holder into the socket andpress until it clicks into place.
6. Press the cover until it clicks into position.
06 Maintenance and specifications
Replacing bulbs
06
224
Fog lights
G02
1753
1. Remove the cover by pressing in the clipsand pulling straight out.
2. Unscrew the fog light housing screw andpull it out.
3. Turn the bulb counterclockwise andremove it.
4. Install a new bulb by turning clockwise.
5. Press the bulb into the holder. (The profileof the bulb holder corresponds to the pro-file of the foot of the bulb.)
6. Reinstall the bulb holder. The TOP mark onthe bulb holder must always be upward.
7. Put the cover back into place.
Taillight housing
G02
1754
The bulbs in the taillight cluster are replacedfrom inside the trunk (not the LED functions).
NOTE
Before starting to replace a bulb, seepage 220.
1. Remove the covers in the left/right panel toaccess the bulbs. The bulbs are located inseparate bulb holders.
2. Press the catches together and pull out thebulb holder.
3. Remove the defective bulb by pressing it inslightly and turning it before pulling it out.
4. Plug in the connector.
5. Press the bulb holder until it clicks intoplace and reinstall the cover.
Location of taillight bulbs
G02
1755
Taillight lens, right side
Parking lights (LED)
Turn signals
Side maker lights (LED)
Brake lights
Rear fog light (driver’s side only)
Backup light
06 Maintenance and specifications
Replacing bulbs
06
225
NOTE
If an error message remains in the displayafter a faulty bulb has been replaced, con-tact an authorized Volvo workshop.
G01
5418
Taillight bulb holder, right side
Turn signal
Brake lights
Rear fog light (driver’s side only)
Backup light
License plate lighting
G02
1756
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housingand pull it out.
3. Replace the bulb.
4. Refit the entire bulb housing and screw itinto place.
Footwell lighting
G02
1757
1. Insert a screwdriver at the short end of thelens closest to the tunnel console (the cen-ter of the vehicle) and turn gently so thatthe lens comes loose. (Applies to bothlights).
2. Turn carefully until the lens comes loose.
3. Replace the bulb.
4. Press the lens back into place.
06 Maintenance and specifications
Replacing bulbs
06
226
Trunk lighting
G02
1758
NOTE
Before starting to replace a bulb, seepage 220.
The trunk lighting is located on opposite sidesof the trunk.
1. Insert a screwdriver and gently turn so thatthe bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and pressit back into the bulb housing.
Vanity mirror lighting
Removing the mirror glass
G02
1759
1. Insert a screwdriver underneath the loweredge, in the center, turn and carefully pryup the lug on the edge.
2. Insert the screwdriver underneath the edgeon the left and right sides (by the blackrubber sections), and pry carefully so thatthe glass comes loose in the lower edge.
3. Carefully detach and lift aside the entiremirror glass and cover.
4. Replace the bulb.
Reinstalling the mirror glass1. Press the three lugs at top edge of the mir-
ror glass back into position.
2. Press the three lower lugs back into posi-tion.
Specification, bulbs
Lightingfunction
Output/volt-age (W/V)
Bulb
Active Bi-Xenon (extrahigh beam)
55 H7
Low beam(halogen)
55 H7
High beam(halogen)
65 H9
Rear turn sig-nals
21 PY21W
Front turn sig-nals
21 H21W
Front foglights
35 H8
Footwell light-ing, trunklighting,license platelighting
5 FestoonbulbSV5.5
06 Maintenance and specifications
Replacing bulbs
06
227
Lightingfunction
Output/volt-age (W/V)
Bulb
Vanity mirror 1.2 FestoonbulbSV5.5
Front parkinglights
5 W5W
Front sidemarker lights
5 W5W
Glove com-partmentlighting
5 FestoonbulbSV8.5
06 Maintenance and specifications
Wiper blades and washer fluid
06
228
Wiper blades
G02
1763
The windshield wiper blades are differentlengths. The blade on the driver’s side is longerthan the one on the passenger side.
Service positionThe wiper blades must be in the service (verti-cal) position for replacement or washing.
1. Switch off the ignition (ignition mode 0, seepage 78) and keep the remote key in theignition slot1.
2. Move the right steering wheel lever up andhold it for at least 1 second. The wipers willthen move to the vertical position on thewindshield.
The wipers will return to the normal positionwhen the vehicle is started.
Replacing the windshield wiper blades
G02
1760
G02
1761
G02
1762
With the wipers in the service position, foldout the wiper arm from the windshield.Press the button on the wiper blade attach-ment and pull the wiper blade straight out,parallel with the wiper arm.
Slide in the new wiper blade until it clicksinto place.
Check that the blade is securely in place.
CleaningKeeping the windshield and wiper blades cleanhelps improve visibility and prolongs the serv-ice life of the wiper blades. Clean the wiperblades with a stiff-bristle brush and lukewarmsoap solution or car washing detergent.
1 Does not apply to vehicles with the optional keyless drive.
06 Maintenance and specifications
Wiper blades and washer fluid
06
229
Filling washer fluid
G02
1764
Location of the washer fluid reservoir
The windshield and headlight washers share acommon reservoir.
The washer fluid reservoir is located on thedriver's side of the engine compartment. Dur-ing cold weather, the reservoir should be filledwith windshield washer solvent containingantifreeze. For capacities, see page 276.
06 Maintenance and specifications
Battery
06
230
Warning symbols on the battery
Wear protective goggles.
Keep away from children.
Avoid smoking, open flames,and/or sparks.
See the owner's manual.
Contains corrosive acid.
Risk of explosion
NOTE
A used battery should be disposed of in anenvironmentally responsible manner. Con-sult your Volvo retailer or take the battery toa recycling station.
Handling• Check that the battery cables are correctly
connected and tightened.
• Never disconnect the battery when theengine is running (for example, whenreplacing the battery).
The service life and function of the battery isinfluenced by factors such as the number ofstarts, discharging, driving style, driving con-ditions, climatic conditions etc.
Never use a quick charger to charge the bat-tery.
WARNING
• Never expose the battery to open flameor electric spark.
• Do not smoke near the battery.
• Battery fluid contains sulfuric acid. Donot allow battery fluid to contact eyes,skin, fabrics or painted surfaces. If con-tact occurs, flush the affected areaimmediately with water. Obtain medicalhelp immediately if eyes are affected.
NOTE
The life of the battery is shortened if itbecomes discharged repeatedly.
Maintenance• Regularly check that the electrolyte level is
correct and never fill above the level mark.
• Check all cells. Use a large screwdriver ora coin to remove the cell caps. Each cellhas its own maximum and minimum levelmark.
• If necessary, top up with distilled water tothe battery's maximum mark.
• Tighten the cell caps thoroughly.
06 Maintenance and specifications
Battery
06
231
CAUTION
• Always use distilled or deionized water(battery water).
• Never fill above the level mark in the cell.
Changing
G02
1768
G02
1769
WARNING
Connect and disconnect the positive andnegative cables in the correct sequence.
RemovalSwitch off the ignition and wait at least5 minutes before disconnecting the battery sothat all information in the vehicle's electricalsystem can be stored in the control modules.
Open the clips on the front cover andremove the cover.
Release the rubber moulding so that therear cover is free.
Remove the rear cover by pulling it away.
Detach the black negative cable.
Detach the red positive cable
Detach the ventilation hose from thebattery
Loosen the screw holding the batteryclamp.
Move the battery to the side and lift it up.
06 Maintenance and specifications
Battery
06
232
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
Installation1. Lower the battery into the battery box.
G02
1771
2. Move the battery inward and to the sideuntil it reaches the rear edge of the box.
3. Screw in the battery with the screw in theclamp.
4. Connect the ventilation hose.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See Removal).
8. Reinstall the cold section moulding. (SeeRemoval).
9. Reinstall the front cover and secure it withthe clips. (See Removal).
06 Maintenance and specifications
Fuses
06
233
Replacing fusesThere are relay/fuse boxes located in theengine compartment, the passenger compart-ment, and the trunk.
If an electrical component fails to function, thismay be due to a blown fuse. The easiest wayto see if a fuse is blown is to remove it.
To do so:
1. Pull the fuse straight out. If a fuse is difficultto remove, special fuse removal tools arelocated on the inside of the fuse box cov-ers.
2. From the side, examine the curved metalwire in the fuse to see if it is intact.
If the wire is broken, insert a new fuse of thesame color and amperage (written on the fuse).
If fuses burn out repeatedly, have the electricalsystem inspected by a trained and qualifiedVolvo service technician.
WARNING
Never use metal objects or fuses with higheramperage than those stated on the follow-ing pages. Doing so could seriously damageor overload the vehicle's electrical system.
Location of the fuse boxes
G02
1772
Under the glove compartment
Engine compartment
Trunk
06 Maintenance and specifications
Fuses
06
234
Engine compartment
G02
5600
06 Maintenance and specifications
Fuses
06
235
Engine compartment, upper
Engine compartment, front
Engine compartment, lower
PositionsThese fuses are all located in the engine com-partment box. Fuses in are located under
.
NOTE
• Fuses 16 – 33 and 35 – 41 may bechanged at any time when necessary.
• Fuses 1 – 15, 34 and 42 – 44 are relays/circuit breakers and should only beremoved or replaced by a trained andqualified Volvo service technician.
• There is a special fuse removal tool onthe underside of the cover.
Function A
Circuit breaker 50
Circuit breaker 50
Circuit breaker 60
Circuit breaker 60
Function A
Circuit breaker 50
–
–
–
Windshield wipers 30
–
Climate system blower 40
–
ABS pump 40
ABS valves 20
–
Active Bi-Xenon Lights.Headlight leveling (option)
10
Central electrical module 20
Radar. ACC control module(option)
5
Speed related power steering 5
Function A
Engine Control Module (ECM),transmission, SRS
10
Heated washer nozzles 10
Vacuum pump I5T 20
Lighting panel 5
Headlight washers 15
12-volt socket, front and rearseat
15
Moonroof (option), ceiling con-sole/ECC (option)
10
Engine compartment box 5
Auxiliary lights (option) 20
Horn 15
Engine Control Module (ECM) 10
Control module, automatictransmission
15
Compressor A/C 15
Coils 5
06 Maintenance and specifications
Fuses
06
236
Function A
Starter motor relay 30
Ignition coils 20
Engine Control Module (ECM),throttle
10
Injection system 15
Engine valves 10
EVAP/heated oxygen sensor/Injection
15
Water pump (V8)
Crank case ventilation heater
10
Fuel leakage detection 5
–
-
Cooling fan 80
06 Maintenance and specifications
Fuses
06
237
Under the glove compartment
10 11 12 13 141 2 3 4 5 6 7 8 9
232221201918171615 24 25 26 27 28
G03
2918
Fold aside the iupholstery covering the fusebox.
1. Press the cover's lock and fold it up.
2. The fuses are accessible.
Positions
Function A
Rain sensor (option) 5
SRS system 10
ABS brakes. Electric parkingbrake
5
Function A
Accelerator pedal, heatedseats (option)
7.5
–
ICM display, CD & Radio 15
Steering wheel module 7.5
–
High beam 15
Function A
Moonroof (option) 20
Backup lights 7.5
–
Front fog light (option) 15
Windshield washers 15
Adaptive cruise control ACC(option)
10
06 Maintenance and specifications
Fuses
06
238
Function A
–
Overhead courtesy lighting,Control panel driver's door/Power passenger seat (option)
7.5
Information display 5
Power driver's seat (option) 5
–
Remote key receiver, Alarmsensors
5
Fuel pump 20
Electric steering column lock 20
–
Lock, tank/trunk 10
Alarm siren. ECC 5
START/STOP ENGINE button 5
Brake light switch 5
06 Maintenance and specifications
Fuses
06
239
In the center consol – S80 Executive only
G03
1531
1. Fold aside the interior trim covering thefuse box.
2. The fuse can then be accessed.
Pos Function A
Analogue clock 5
06 Maintenance and specifications
Fuses
06
240
Trunk
G03
2920
The fuse box is located behind the upholstery on the left side of the trunk
Positions
Module A (black). Func-tion
A
Switches in driver's door 25
Switches in passenger's door 25
Switches in rear door, driver'sside
25
Switches in rear door, pas-senger's side
25
Module A (black). Func-tion
A
–
12-V socket in cargo area,refrigerator (S80 Executiveonly)
15
Rear window defroster 30
Folding rear head restraints(option)
15
Module A (black). Func-tion
A
Trailer socket 2 (option) 15
Power driver's seat (option) 25
Trailer socket 1 (option) 40
-
06 Maintenance and specifications
Fuses
06
241
Module B (white). Func-tion
A
Front seat massage, arm restlights, refrigerator (option)
5
Control module Four C(option)
15
Heated driver's seat (option) 15
Heated passenger's seat(option)
15
Rear seat heater, passenger'sside (option)
15
AWD control module 10
Rear seat heater, driver's side(option)
15
Folding head restraints 15
Power passenger's seat(option)
25
Keyless drive (option) 20
Module B (white). Func-tion
A
Electric parking brake – driv-er's side (option)
30
Electric parking brake – pas-senger's side (option)
30
Module D (blue). Func-tion
A
Navigation system display(option)
10
–
–
SIRIUS satellite radio (option) 5
Audio amplifier 25
Audio system 15
–
Reserve –
06 Maintenance and specifications
Wheels and tires
06
242
IntroductionYour vehicle is equipped with tires accordingto the vehicle's tire information placard on theB-pillar (the structural member at the side ofthe vehicle, at the rear of the driver's dooropening).
The tires have good road holding characteris-tics and offer good handling on dry and wetsurfaces. It should be noted however that thetires have been developed to give these fea-tures on snow/ice-free surfaces.
Certain models are equipped with "all-season"tires, which provide a somewhat higher degreeof road holding on slippery surfaces than tireswithout the "all-season" rating. However, foroptimum road holding on icy or snow-coveredroads, we recommend suitable winter tires onall four wheels.
CAUTION
Some Volvo models are equipped with anUltra High Performance tire and wheel com-bination designed to provide maximum drypavement performance with considerationfor hydroplaning resistance. As such, theymay be more susceptible to road hazarddamage and, depending on driving condi-tions, may achieve a tread life of less than20,000 miles (30,000 km). Even if this vehi-cle is equipped with Volvo’s advanced AWDor DSTC system, these tires are notdesigned for winter driving, and should bereplaced with winter tires when weatherconditions dictate.
When replacing tires, be sure that the new tiresare the same size designation, type (radial) andpreferably from the same manufacturer, on allfour wheels. Otherwise there is a risk of alteringthe car's roadholding and handling characte-ristics.
Storing wheels and tiresWhen storing complete wheels (tires mountedon rims), they should be suspended off thefloor or placed on their sides on the floor.
Tires not mounted on rims should be stored ontheir sides or standing upright, but should notbe suspended.
CAUTION
Tires should preferably be stored in a cool,dry, dark place, and should never be storedin close proximity to solvents, gasoline, oils,etc.
Tread wear indicator
G02
1829
Tread wear indicator
The tires have wear indicator strips runningacross or parallel to the tread. The letters TWIare printed on the side of the tire. Whenapproximately 1/16 " (1.6 mm) is left on thetread, these strips become visible and indicatethat the tire should be replaced. Tires with lessthan 1/16 " (1.6 mm) tread offer very poor trac-tion.
06 Maintenance and specifications
Wheels and tires
06
243
When replacing worn tires, it is recommendedthat the tire be identical in type (radial) and sizeas the one being replaced. Using a tire of thesame make (manufacturer) will prevent altera-tion of the driving characteristics of the vehicle.
WARNING
• The wheel and tire sizes for your Volvoare specified to meet stringent stabilityand handling requirements. Unap-proved wheel/tire size combinationscan negatively affect your vehicle's sta-bility and handling. Approved tire sizesare shown in the Tire inflation pressuretables.
• Any damage caused by installation ofunapproved wheel/tire size combina-tions will not be covered by your newvehicle warranty. Volvo assumes noresponsibility for death, injury, orexpenses that may result from suchinstallations.
New tires
G02
1823
Remember that tires are perishable goods. Asof 2000, the manufacturing week and year(Department of Transportation (DOT) stamp)will be indicated with 4 digits (e.g. 1502 meansthat the tire illustrated was manufactured dur-ing week 15 of 2002).
Tire age• Tires degrade over time, even when they
are not being used. It is recommended thattires generally be replaced after 6 years ofnormal service. Heat caused by hot cli-mates, frequent high loading conditions orUltra Violet (U.V.) exposure can acceleratethe aging process.
• You should replace the spare tire when youreplace the other road tires due to theaging of the spare.
• A tire's age can be determined by the DOTstamp on the sidewall (see the illustration).
• A tire with e.g., visible cracks or discolor-ation should be replaced immediately.
Improving tire economy• Maintain correct tire pressure. See the tire
pressure tables on pages 246 and 247.
• Drive smoothly: avoid fast starts, hardbraking and tire screeching.
• Tire wear increases with speed.
• Correct front wheel alignment is veryimportant.
• Unbalanced wheels impair tire economyand driving comfort.
• Tires must maintain the same direction ofrotation throughout their lifetime.
• When replacing tires, the tires with themost tread should be mounted on the rearwheels to reduce the chance of oversteerduring hard braking.
• Hitting curbs or potholes can damage thetires and/or wheels permanently.
06 Maintenance and specifications
Wheels and tires
06
244
Tire inflation
G03
2521
Tire inflation placard on U.S. models
Tire inflationCheck tire inflation pressure regularly.
Tables listing the recommended inflation pres-sure for your vehicle can be found on pages246 and 247. A tire inflation pressure placardis also located on the driver's side B-pillar (thestructural member at the side of the vehicle, atthe rear of the driver's door opening). This plac-ard indicates the designation of the factory-mounted tires on your vehicle, as well as loadlimits and inflation pressure.
NOTE
• The placards shown indicate inflationpressure for the tires installed on thevehicle at the factory only.
• A certain amount of air seepage fromthe tires occurs naturally and tire pres-sure fluctuates with seasonal changesin temperature. Always check tire pres-sure regularly.
• Use a tire gauge to check the tire inflationpressure, including the spare, at least oncea month and before long trips. You arestrongly urged to buy a reliable tire pres-sure gauge, as automatic service stationgauges may be inaccurate.
• Use the recommended cold inflation pres-sure for optimum tire performance andwear.
• Under-inflation or over-inflation may causeuneven treadwear patterns.
NOTE
A certain amount of air seepage from thetires occurs naturally and tire pressure fluc-tuates with seasonal changes in tempera-ture. Always check tire pressure regularly.
WARNING
• Under-inflation is the most commoncause of tire failure and may result insevere tire cracking, tread separation,or "blow-out," with unexpected loss ofvehicle control and increased risk ofinjury.
• Under-inflated tires reduce the load car-rying capacity of your vehicle.
G03
2522
Tire inflation placard on Canadian models
When weather temperature changes occur, tireinflation pressures also change. A 10-degreetemperature drop causes a correspondingdrop of 1 psi (7 kPa) in inflation pressure. Checkyour tire pressures frequently and adjust themto the proper pressure, which can be found on
06 Maintenance and specifications
Wheels and tires
06
245
the vehicle's tire information placard or certifi-cation label.
Checking tire pressure
Cold tiresInflation pressure should be checked when thetires are cold.
The tires are considered to be cold whenthey have the same temperature as the sur-rounding (ambient) air.
This temperature is normally reached after thevehicle has been parked for at least 3 hours.
After driving a distance of approximately1 mile (1.6 km), the tires are considered to behot. If you have to drive farther than this dis-tance to pump your tire(s), check and recordthe tire pressure first and add the appropriateair pressure when you get to the pump.
If checking tire pressure when the tire is hot,never "bleed" or reduce air pressure. The tiresare hot from driving and it is normal for pres-sures to increase above recommended coldpressures. A hot tire at or below recommendedcold inflation pressure could be significantlyunder-inflated.
To check inflation pressure:1. Remove the cap from the valve on one tire,
then firmly press the tire gauge onto thevalve.
2. Add air to reach the recommended airpressure.
3. Replace the valve cap.
4. Repeat this procedure for each tire, includ-ing the spare.
5. Visually inspect the tires to make sure thereare no nails or other objects embeddedthat could puncture the tire and cause anair leak.
6. Check the sidewalls to make sure there areno gouges, cuts, bulges or other irregular-ities.
NOTE
• If you overfill the tire, release air bypushing on the metal stem in the centerof the valve. Then recheck the pressurewith your tire gauge.
• Some spare tires require higher inflationpressure than the other tires. Consultthe tire inflation tables or see the infla-tion pressure placard.
Tire specifications
Speed ratingsThe speed ratings in the table translate as fol-low:
Speed ratings
M 81 mph (130 km/h)
Q 100 mph (160 km/h)
T 118 mph (190 km/h)
H 130 mph (210 km/h)
W 168 mph (270 km/h)
V 149 mph (240 km/h)
Y 186 mph (300 km/h)
Load ratingsThe speed ratings in the table translate as fol-low:
Load ratings
91 1365 lbs (615 kg)
93 1433 lbs (650 kg)
99 1709 lbs (755 kg)
06 Maintenance and specifications
Wheels and tires
06
246
See also page 247 for an explanation of the designations on the sidewall of the tire.
Tire inflation pressure table – U.S. modelsThe following tire pressures are recommended by Volvo for your vehicle. Refer to the tire inflation placard for information specific to the tires installedon your vehicle at the factory.
Tire size Cold tire pressure for up to 5 persons
Front
psi/kPa
Rear
psi/kPa
6-cylinder models
225/50 R 17
245/45 R 17
245/40 R18
35/240 35/240
V8 models
245/45 R 17
35/240 35/240
V8 models
245/40 R18
36/250 36/250
T 125/80 R 17 61/420 61/420
06 Maintenance and specifications
Wheels and tires
06
247
Tire inflation pressure table – Canadian modelsThe following tire pressures are recommended by Volvo for your vehicle. Refer to the tire inflation placard for information specific to the tires installedon your vehicle at the factory.
Tire size Cold tire pressure for up to 5 persons Optional tire pressure for up to 3 persons
Front
psi/kPa
Rear
psi/kPa
Front
psi/kPa
Rear
psi/kPa
6-cylinder models
225/50 R 17
245/45 R 17
38/260 38/260 32/220 32/220
6-cylinder models
245/40 R 18
38/260 38/260 33/230 33/230
V8 models
245/45 R 17
38/260 38/260 32/220 32/220
V8 models 38/260 38/260 35/240 35/240
T 125/80 R 17 61/420 61/420 61/420 61/420
06 Maintenance and specifications
Wheels and tires
06
248
Tire designations
310
11
12
4
5 6 7 89
2
1
G01
0753
Federal law mandates that tire manufacturersplace standardized information on the sidewallof all tires (see the illustration).
The following information is listed on the tiresidewall:
The tire designation (the following figures areexamples of a tire designation):
1. 215: the width of the tire (in millimeters)from sidewall edge to sidewall edge. Thelarger the number, the wider the tire.
2. 65: The ratio of the tire's height to its width.
3. R: Radial tire.
4. 15: The diameter of the wheel rim (ininches).
5. 95: The tire's load index. In this example, aload index of 95 equals a maximum load of1521 lbs (690 kg).
6. H: The tire's speed rating, or the maximumspeed at which the tire is designed to bedriven for extended periods of time, carry-ing a permissible load for the vehicle, andwith correct inflation pressure. For exam-ple, H indicates a speed rating of 130 mph(210 km/h).
NOTE
This information may not appear on the tirebecause it is not required by law.
7. M+S or M/S = Mud and Snow, AT = AllTerrain, AS = All Season
8. U.S. DOT Tire Identification Number(TIN): This begins with the letters "DOT"and indicates that the tire meets all federalstandards. The next two numbers or lettersare the plant code where it was manufac-tured, the next two are the tire size codeand the last four numbers represent theweek and year the tire was built. For exam-ple, the numbers 317 mean the 31st weekof 1997. After 2000 the numbers go to fourdigits. For example, 2501 means the 25thweek of 2001. The numbers in between aremarketing codes used at the manufactur-er's discretion. This information helps a tiremanufacturer identify a tire for safety recallpurposes.
9. Tire Ply Composition and MaterialUsed: Indicates the number of plies indi-cates or the number of layers of rubber-coated fabric in the tire tread and sidewall.Tire manufacturers also must indicate theply materials in the tire and the sidewall,which include steel, nylon, polyester, andothers.
06 Maintenance and specifications
Wheels and tires
06
249
10. Maximum Load: Indicates the maximumload in pounds and kilograms that can becarried by the tire. Refer to the vehicle's tireinformation placard or the safety certifica-tion label, located on the B-Pillar or thedriver's door or on the inside of the fuel fillerdoor on Canadian models, for the correcttire pressure for your vehicle.
11. Treadwear, Traction, and Temperaturegrades: See page 251 for more informa-tion.
12. Maximum permissible inflation pressure:the greatest amount of air pressure thatshould ever be put in the tire. This limit isset by the tire manufacturer.
Glossary of tire terminologyThe tire suppliers may have additional mark-ings, notes or warnings such as standard load,radial tubeless, etc.
• Tire information placard: A placardshowing the OE (Original Equipment) tiresizes, recommended inflation pressure,and the maximum weight the vehicle cancarry.
• Tire Identification Number (TIN): A num-ber on the sidewall of each tire providinginformation about the tire brand and man-ufacturing plant, tire size and date of man-ufacturer.
• Inflation pressure: A measure of theamount of air in a tire.
• Standard load: A class of P-metric or Met-ric tires designed to carry a maximum loadat 35 psi [37 psi (2.5 bar) for Metric tires].Increasing the inflation pressure beyondthis pressure will not increase the tires loadcarrying capability.
• Extra load: A class of P-metric or Metrictires designed to carry a heavier maximumload at 41 psi [43 psi (2.9 bar) for Metrictires]. Increasing the inflation pressurebeyond this pressure will not increase thetire's load carrying capability.
• kPa: Kilopascal, a metric unit of air pres-sure.
• PSI: Pounds per square inch, a standardunit of air pressure.
• B-pillar: The structural member at the sideof the vehicle behind the front door.
• Bead area of the tire: Area of the tire nextto the rim.
• Sidewall of the tire: Area between thebead area and the tread.
• Tread area of the tire: Area of the perim-eter of the tire that contacts the road whenmounted on the vehicle.
• Rim: The metal support (wheel) for a tire ora tire and tube assembly upon which thetire beads are seated.
• Maximum load rating: a figure indicatingthe maximum load in pounds and kilo-grams that can be carried by the tire. Thisrating is established by the tire manufac-turer.
• Maximum permissible inflationpressure: the greatest amount of air pres-sure that should ever be put in the tire. Thislimit is set by the tire manufacturer.
• Recommended tire inflation pressure:inflation pressure, established by Volvo,which is based on the type of tires that aremounted on a vehicle at the factory. Thisinflation pressure is affected by the numberof occupants in the vehicle, the amount ofcargo, and the speed at which the vehiclewill be driven for a prolonged period. Thisinformation can be found on the tire infla-tion placard(s) located on the driver's sideB-pillar or on the inside of the fuel filler dooron Canadian models, and in the tire infla-tion table in this chapter.
• Cold tires: The tires are considered to becold when they have the same temperatureas the surrounding (ambient) air. This tem-perature is normally reached after the vehi-cle has been parked for at least 3 hours.
06 Maintenance and specifications
Wheels and tires
06
250
Vehicle loadingProperly loading your vehicle will provide maxi-mum return of vehicle design performance.
Before loading your vehicle, familiarize yourselfwith the following terms for determining yourvehicle's weight ratings, with or without atrailer, from the vehicle's Federal/CanadianMotor Vehicle Safety Standards (FMVSS/CMVSS) label, and the vehicle's tire informa-tion placard:
Curb weightThe weight of the vehicle including a full tankof fuel and all standard equipment. It does notinclude passengers, cargo, or optional equip-ment.
Capacity weightAll weight added to the curb weight, includingcargo and optional equipment. When towing,trailer hitch tongue load is also part of cargoweight.
NOTE
For trailer towing information, please refer tothe section "Towing a trailer", seepage 205.
Permissible axle weightThe maximum allowable weight that can becarried by a single axle (front or rear). Thesenumbers are shown on the Federal/CanadianMotor Vehicle Safety Standards (FMVSS/CMVSS) label. The total load on each axle mustnever exceed its maximum permissible weight.
Gross vehicle weight (GVW)The vehicle's curb weight + cargo + passen-gers.
NOTE
• The location of the various labels in yourvehicle can be found on page 269.
• A table listing important weight limits foryour vehicle can be found on page272.
Steps for Determining Correct LoadLimit1. Locate the statement "the combined
weight of occupants and cargo shouldnever exceed XXX pounds" on your vehi-cle's placard.
2. Determine the combined weight of thedriver and passengers that will be riding inyour vehicle.
3. Subtract the combined weight of the driverand passengers from XXX kilograms orXXX pounds.
4. The resulting figure equals the availableamount of cargo and luggage loadcapacity. For example, if the "XXX" amountequals 1400 lbs. and there will be five150 lb. passengers in your vehicle, theamount of available cargo and luggageload capacity is 650 lbs. (1400 – 750(5 × 150) = 650 lbs.)
5. Determine the combined weight of luggageand cargo being loaded on the vehicle.That weight may not safely exceed theavailable cargo and luggage load capacitycalculated in Step 4.
6. If your vehicle will be towing a trailer, loadfrom your trailer will be transferred to yourvehicle. Consult this manual1 to determinehow this reduces the available cargo andluggage load capacity of your vehicle.
1 See "Introduction" on page 205.
06 Maintenance and specifications
Wheels and tires
06
251
WARNING
• Exceeding the permissible axle weight,gross vehicle weight, or any otherweight rating limits can cause tire over-heating resulting in permanent defor-mation or catastrophic failure.
• Do not use replacement tires with lowerload carrying capacities than the tiresthat were original equipment on thevehicle because this will lower the vehi-cle's GVW rating. Replacement tireswith a higher limit than the originals donot increase the vehicle's GVW ratinglimitations.
Uniform Tire Quality GradingALL PASSENGER VEHICLE TIRES MUSTCONFORM TO FEDERAL SAFETYREQUIREMENTS IN ADDITION TO THESEGRADES
Quality grades can be found, where appli-cable, on the tire sidewall between the treadshoulder and maximum section width. Forexample:
Treadwear 200 Traction AA Temperature A
TREADWEARThe treadwear grade is a comparative ratingbased on the wear rate of the tire when testedunder controlled conditions on a specified gov-
ernment test course. For example, a tire gra-ded 150 would wear one and one half (1 1/2)times as well on the government course as atire graded 100. The relative performance oftires depends upon the actual conditions oftheir use, however, and many depart signifi-cantly from the norm due to variation in drivinghabits, maintenance practices and differencesin road characteristics and climate.
TRACTIONThe traction grades, from highest to lowest, areAA, A, B, and C, as measured under controlledconditions on specified government test sur-faces of asphalt and concrete. A tire marked Cmay have poor traction performance. The trac-tion grade assigned to this tire is based onbraking (straight-ahead) traction tests and isnot a measure of cornering (turning) traction.
WARNING
The traction grade assigned to this tire isbased on braking (straight-ahead) tractiontests and is not a measure of cornering(turning) traction.
TEMPERATUREThe temperature grades are AA (the highest),A, B, and C, representing the tire's resistanceto the generation of heat and its ability to dis-sipate heat when tested under controlled con-
ditions on a specified indoor laboratory testwheel. Sustained high temperature can causethe material of the tire to degenerate andreduce tire life, and excessive temperature canlead to sudden tire failure. The grade C corre-sponds to a minimum level of performance thatall passenger vehicle tires must meet under theFederal Motor Safety Standard No. 109.Grades B and A represent higher levels of per-formance on the laboratory test wheel than theminimum required by law.
WARNING
The temperature grade for this tire is estab-lished for a tire that is properly inflated andnot overloaded. Excessive speed, under-inflation, or excessive loading, either sepa-rately or in combination, can cause heatbuildup and tire failure.
Snow chains, snow tires, studded tires
Snow chainsSnow chains can be used on your Volvo withthe following restrictions:
• Snow chains should be installed on frontwheels only. Use only Volvo approvedsnow chains.
• If accessory, aftermarket or "custom" tiresand wheels are installed and are of a sizedifferent than the original tires and wheels,
06 Maintenance and specifications
Wheels and tires
06
252
chains in some cases CANNOT be used.Sufficient clearances between chains andbrakes, suspension and body componentsmust be maintained.
• Some strap-on type chains will interferewith brake components and thereforeCANNOT be used.
• All Wheel Drive models: Snow chainsshould only be installed on the frontwheels. Only chains adapted for AWDmodels should be used.
Consult your Volvo retailer for additional snowchain information.
CAUTION
• Check local regulations regarding theuse of snow chains before installing.
• Always follow the chain manufacturer'sinstallation instructions carefully. Installchains as tightly as possible andretighten periodically.
• Never exceed the chain manufacturer'sspecified maximum speed limit. (Underno circumstances should you exceed31 mph (50 km/h).
• Avoid bumps, holes or sharp turnswhen driving with snow chains.
• The handling of the vehicle can beadversely affected when driving withchains. Avoid fast or sharp turns as wellas locked wheel braking.
Snow tires, studded tires2
Tires for winter use:• Owners who live in or regularly commute
through areas with sustained periods ofsnow or icy driving conditions are stronglyadvised to fit suitable winter tires to helpretain the highest degree of traction.
• It is important to install winter tires on allfour wheels to help retain traction duringcornering, braking, and accelerating. Fail-
ure to do so could reduce traction to anunsafe level or adversely affect handling.
• Do not mix tires of different design as thiscould also negatively affect overall tire roadgrip.
• Winter tires wear more quickly on dry roadsin warm weather. They should be removedwhen the winter driving season has ended.
• Studded tires should be run-in300 – 600 miles (500 – 1000 km) duringwhich the vehicle should be driven assmoothly as possible to give the studs theopportunity to seat properly in the tires.The tires should have the same rotationaldirection throughout their entire lifetime.
NOTE
Please consult state or provincial regula-tions restricting the use of studded wintertires before installing such tires.
2 Where permitted
06 Maintenance and specifications
Wheels and tires
06
253
Temporary SpareThe spare tire in your vehicle is called a "Tem-porary Spare".
Recommended tire pressure (see the placardon the B-pillar or on the fuel filler door) shouldbe maintained irrespective of which position onthe vehicle the temporary spare tire is used on.
In the event of damage to this tire, a new onecan be purchased from your Volvo retailer.
WARNING
Current legislation prohibits the use of the"Temporary Spare" tire other than as a tem-porary replacement for a punctured tire. Itmust be replaced as soon as possible by astandard tire. Road holding and handlingmay be affected with the "TemporarySpare" in use. Do not exceed 50 mph(80 km/h).
CAUTION
The vehicle must not be driven with wheelsof different dimensions or with a spare tireother than the one that came with the vehi-cle. The use of different size wheels canseriously damage your car's transmission.
G02
1778
The arrow shows the direction of rotation of thetire
Summer and winter tires• When switching between summer and
winter tires, mark the tires to indicatewhere they were mounted on the vehicle,e.g. LF = left front, RR = right rear.
• Tires with tread designed to roll in only onedirection are marked with an arrow on thesidewall.
• Incorrectly mounted tires impair the car'sbraking properties and ability to forceaside rain, snow and slush.
• The tires with the most tread should alwaysbe at the rear (to reduce the risk of skid-ding).
• Contact a Volvo workshop if you areunsure about the tread depth.
Tire rotationYour vehicle has no recommended tire rota-tion. The following information is intended tohelp you understand why.
Tread setAs a tire ages and the rubber cures, front andrear tires set at different angles. Therefore, iftires are rotated, the tread will eventually set atan angle that is a compromise. Even if ride,handling, and road noise may still seemacceptable, they may not be optimal. Further,tires that are rotated, but not on a regular basis,may actually cause more tire noise, faster tirewear, and unpleasant changes in steering feeland vehicle handling.
A tire that can fully adapt to its position willprovide better steering feel, lower tire noise,and better fuel economy.
Braking stability performanceYour vehicle is driven mainly by the front tires,which will wear faster. This can be beneficial.Having more tread on the rear tires will helpreduce oversteer. Oversteer is when a vehiclewants to keep turning because of momentumand dynamic forces on its suspension.
Suspension wear diagnosticsEvery suspension needs periodic inspectionand maintenance. A tire's wear pattern can bean aid in detecting a suspension problem. Eachtire, if left in place, tells a story about the sus-
06 Maintenance and specifications
Wheels and tires
06
254
pension. Tire rotation, on the other hand, couldmake suspension wear harder to detect. Earlydetection is very important, because suspen-sion problems can make tire wear worse.
If you do rotate your tires…Please follow the tire manufacturer's recom-mendations, as outlined in the tire manufactur-ers tire warranty pamphlet.
Your Volvo retailer can also provide guidancebased on your particular driving circumstan-ces.
Changing a wheelG
0143
41
Spare wheelThe spare wheel (Temporary spare) is onlyintended for temporary use. Replace the sparewheel with a normal wheel as soon as possible.
The car's handling may be altered by the useof the spare wheel. The correct tire pressure forthe spare wheel is stated in the tire pressuretables on pages 246 and 247.
WARNING
Current legislation prohibits the use of the“Temporary Spare” tire other than as a tem-porary replacement for a punctured tire. Itmust be replaced as soon as possible by astandard tire. Road holding and handlingmay be affected with the “TemporarySpare” in use.
CAUTION
The vehicle must never be driven with morethan one temporary spare wheel.
The spare wheel is located in the spare wheelwell with the rim side down. There are two foamblocks, one under the spare wheel and oneover/inside. The upper one contains all tools.
The same bolt runs through to secure the sparewheel and the foam blocks.
Taking out the spare wheel1. Fold the rear edge of the floor mat forward.
2. Open the floor hatch.
3. Undo the retaining bolt.
4. Lift out the foam block with tools.
5. Lift out the spare wheel.
The other two blocks can remain in the wheelwell.
After useThe foam block and spare wheel must bereplaced in the reverse order. Note the arrowon the upper foam block. It should point for-ward.
G02
1779
Removing the wheel cover
Changing a tire:1. Apply the parking brake.
2. Put the gear selector in P.
3. Block the wheels that are on the groundwith wooden blocks or large stones.
06 Maintenance and specifications
Wheels and tires
06
255
4. Remove the wheel cover (where applica-ble) using the lug wrench in the toolbag.With the vehicle still on the ground,use the lug wrench to loosen the wheelnuts 1/2 – 1 turns by exerting downwardpressure.
5. Turn the nuts counterclockwise to loosen.
G01
7465
6. There are two jack attachment points oneach side of the vehicle. Position the jackcorrectly in the attachment (see illustrationabove) and crank while simultaneouslyguiding the base of the jack to the ground.The base of the jack must be flat on a level,firm, non-slippery surface. Before raisingthe vehicle, check that the jack is still cor-rectly positioned in the attachment.
7. Raise the vehicle until the wheel to bechanged is lifted off the ground.
8. Unscrew the wheel nuts completely andcarefully remove the wheel so as not todamage the threads on the studs.
9. Raise the vehicle until the wheel to bechanged is lifted off the ground.
10. Unscrew the wheel nuts completely andcarefully remove the wheel so as not todamage the threads on the studs.
WARNING
• The jack must correctly engage the jackattachment.
• Be sure the jack is on a firm, level, non-slippery surface.
• Never allow any part of your body to beextended under a vehicle supported bya jack.
• Use the jack intended for the vehiclewhen changing a tire. For any other job,use stands to support the vehicle.
• Apply the parking brake and put thegear selector in the Park (P) position.
• Block the wheels standing on theground, use rigid wooden blocks orlarge stones.
• The jack should be kept well-greasedand clean, and should not be damaged.
• No objects should be placed betweenthe base of jack and the ground, orbetween the jack and the attachmentbar on the vehicle.
Re-installing the wheel1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
06 Maintenance and specifications
Wheels and tires
06
256
G02
2916
Tighten the lug nuts
3. Install the wheel nuts and tighten hand-tight. Using the lug wrench, tighten cross-wise until all nuts are snug.
4. Lower the vehicle to the ground and alter-nately tighten the bolts crosswise to62 ft. lbs. (85 Nm).
5. Install the wheel cap (where applicable).
Tire Sealing System
G01
4340
IntroductionCertain models are equipped with a tire sealingsystem that enables you to temporarily seal ahole in the tread surface and re-inflate a flat tire,or to adjust a tire’s inflation pressure.
The system consists of an air compressor, acontainer for the sealing compound, wiring toconnect the system to the vehicle’s electricalsystem via one of the 12-volt sockets, and ahose used to connect the system to the tire’sinflation valve.
The 12-volt sockets are located in the fronttunnel console and on the rear side of the cen-ter console in the rear seat, see page 189.
Accessing the tire sealing systemThe tire sealing system is stowed under thefloor of the trunk. To access it:
1. Fold up or remove any protective floor cov-ering or carpet.
2. Open the floor hatch.3. Remove the retaining screws.4. Lift out the foam plastic block holding the
jack and lug wrench.5. Lift out the tire sealing system.
NOTE
• The tire sealing system is only intendedto seal holes on the tire’s tread area, notthe sidewall.
• Tires with large holes or tears cannot berepaired with the tire sealing system.
06 Maintenance and specifications
Wheels and tires
06
257
WARNING
• After using the tire sealing system, thevehicle should not be driven farther thanapproximately 120 miles (200 km).
• Have the tire inspected by a trained andqualified Volvo service technician assoon as possible to determine if it canbe permanently repaired or must bereplaced.
• The vehicle should not be driven fasterthan 50 mph (80 km/h) while using a tirethat has been temporarily repaired withthe tire sealing system.
• After using the tire sealing system, drivecarefully and avoid abrupt steeringmaneuvers and sudden stops.
Tire sealing system–overview
G01
4337
Speed limit sticker
On/Off switch
Electrical wire
Bottle holder (orange cover)
Protective hose cover
Air release knob
Hose
Bottle with sealing compound
Air pressure gauge
Protective gloves3
3 Certain markets only
06 Maintenance and specifications
Wheels and tires
06
258
WARNING
Please keep the following points in mindwhen using the tire sealing system:
• The sealing compound bottle (no. 8 inthe illustration) contains 1.2-Ethanoland natural rubber-latex. These sub-stances are harmful if swallowed.
• The contents of this bottle may causeallergic skin reactions or otherwise bepotentially harmful to the skin, the cen-tral nervous system, and the eyes.
Precautions:
• Keep out of reach of children.
• Do not ingest the contents.
• Avoid prolonged or repeated contactwith the skin.
• Hands should be washed thoroughlyafter handling.
First aid:
• Skin: Wash affected areas of skin withsoap and water. Get medical attentionif symptoms occur.
• Eyes: Flush with plenty of water for least15 minutes, occasionally lifting theupper and lower eyelids. Get medicalattention if symptoms occur.
• Inhalation: Move the person to fresh air.If irritation persists, get medical atten-tion.
Tire sealing system–temporarilyrepairing a flat tire
G01
4338
Temporarily repairing a flat tire is done in twostages:
• Stage 1: The hole is sealed by pumpingsealing compound into the tire. The car isthen driven a short distance to distributethe sealing compound in the tire.
NOTE
Do not remove any foreign objects (nails,etc.) from the tire before using the sealingsystem.
• Stage 2: The tire’s inflation pressure ischecked and adjusted if necessary.
WARNING
• Never leave the tire sealing systemunattended when it is operating.
• Keep the tire sealing system away fromchildren.
• Be sure the vehicle is parked safely offthe road and away from moving traffic.
• Apply the parking brake.
Stage 1: Sealing the hole1. Open the cover on the tire sealing kit.
2. Peel off the speed limit sticker and affix itto the steering wheel hub where it will beclearly visible to the driver.
06 Maintenance and specifications
Wheels and tires
06
259
3. Ensure that the on/off switch is in posi-tion 0 (the 0 side of the switch should bepressed down).
4. Put on the gloves included in the tire seal-ing system.
WARNING
Contact with the sealing compound maycause skin irritation. If contact occurs, washthe affected area immediately with soap andwater.
5. Unscrew the orange cover over the bottleholder and unscrew the cap on the bottleof sealing compound.
NOTE
Do not break the seal on the bottle. Thisoccurs automatically when the bottle isscrewed into the holder.
6. Screw the bottle into the bottle holder.
WARNING
The bottle is equipped with a catch to keepit securely in place and help prevent sealingcompound leakage. Once in place, the bot-tle cannot be unscrewed. This must be doneby a trained and qualified Volvo servicetechnician.
7. Remove the valve cap from the tire’s infla-tion valve and screw the tire sealing sys-tem’s hose connector onto the valve astightly as possible by hand.
8. Connect the electrical wire to the nearest12-volt socket in the vehicle.
9. Start the vehicle’s engine.
WARNING
The vehicle´s engine schould be runningwhen the tire sealing system is used to avoidbattery drain. Therefore, be sure the vehicleis parked in a well ventilated place, or out-doors, before using the system.
10. Start the tire sealing system’s compressorby pressing the on/off switch to position I.
WARNING
• Never stand next to the tire being inflatedwhen the compressor is in operation.
• If cracks, bubbles, etc. form on the tire,switch off the compressor immediately.
• If there is visible damage to the sidewallor the rim, the tire cannot be repaired.The vehicle should not be driven if thisoccurs. Contact a towing service orVolvo On Call Roadside Assistance ifapplicable.
NOTE
The air pressure gauge will temporarilyshow an increase in pressure to approxi-mately 88 psi (6 bar) while the sealing com-pound is being pumped into the tire. Thepressure should return to a normal levelafter approximately 30 seconds.
11. Within seven minutes, inflate the tire tobetween 22—44 psi (1.8—3.0 bar). Switchoff the compressor briefly to get a clearreading from the pressure gauge. Thecompressor should not be used for morethan 10 minutes at a time to avoid over-heating.
06 Maintenance and specifications
Wheels and tires
06
260
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
WARNING
If the pressure remains below 22 psi (1.8bar) after approximately seven minutes, turnoff the compressor. In this case, the hole istoo large to be sealed and the vehicle shouldnot be driven.
12. Switch off the compressor and disconnectthe electrical wire from the 12-volt socket.
13. Unscrew the hose from the tire’s inflationvalve and reinstall the valve cap.
14. Immediately drive the vehicle for approxi-mately 2 miles (3 km) at a maximum speedof 50 mph (80 km/h) to distribute the seal-ing compound in the tire.
NOTE
• Safely stow the tire sealing system in aconvenient place as it will soon be usedagain to check the tire’s inflation pres-sure.
• The empty bottle of sealing compoundcannot be removed from the bottleholder. Consult a trained and qualifiedVolvo service technician to have thebottle removed and properly disposedof.
WARNING
If heavy vibrations, unsteady steeringbehavior, or noises should occur while driv-ing, reduce speed and park the vehicle in asafe place. Recheck the tire for bumps,cracks, or other visible damage, andrecheck its inflation pressure. If the pressureis below 19 psi (1.3 bar), do not continuedriving. Have the vehicle towed to a trainedand qualified Volvo service technician.
Stage 2: Checking inflation pressure1. Connect the tire sealing system as descri-
bed in stage 1.
2. Refer to the inflation pressure tablesfor thecorrect inflation pressure. If the tire needsto be inflated, start the tire sealing system’scompressor. If necessary, release air from
the tire by turning the air release knobcounterclockwise.
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
WARNING
If you interrupt your trip for more than 1hour, check the inflation pressure in thedamaged tire again before continuing.
Replacing the sealing compoundcontainerThe sealing compound container must bereplaced if:
• the tire sealing system has been used torepair a tire
• the container’s expiration date has passed(see the date on decal).
06 Maintenance and specifications
Wheels and tires
06
261
NOTE
• After use, the sealing compound bottle,the hose, and certain other systemcomponents must be replaced. Pleaseconsult your Volvo retailer for replace-ment parts.
• If the sealing compound bottle’s expi-ration date has passed, please take it toa Volvo retailer or a recycling stationthat can properly dispose of harmfulsubstances.
Inflating tiresThe tire sealing system can be used to inflatethe tires. To do so:
1. Park the car in a safe place.
2. The compressor should be switched off.Ensure that the on/off switch is in position
0 (the 0 side of the switch should bepressed down).
3. Take out the electrical wire and hose.
4. Remove the valve cap from the tire’s infla-tion valve and screw the hose connectoronto the valve as tightly as possible byhand.
5. Connect the electrical wire to the nearest12-volt socket in the vehicle.
6. Start the vehicle’s engine.
WARNING
• The vehicle’s engine should be runningwhen the tire sealing system is used toavoid battery drain. Therefore, be surethe vehicle is parked in a well ventilatedplace, or outdoors, before using the sys-tem.
• Children should never be left unattendedin the vehicle when the engine is running.
7. Check the tire’s inflation pressure on thegauge. Switch off the compressor briefly toget a clear reading from the pressuregauge.
8. Refer to the tire inflation tables for the cor-rect inflation pressure. If the tire needs tobe inflated, start the tire sealing system’scompressor (press the on/off switch toposition I). If necessary, release air from thetire by turning the air release knob coun-terclockwise.
CAUTION
The compressor should not be used formore than 10 minutes at a time to avoidoverheating.
9. Turn off the compressor (press the on/offswitch to position 0) when the correct infla-tion pressure has been reached.
10. Unscrew the hose from the tire’s inflationvalve and reinstall the valve cap.
11. Disconnect the electrical wire from the12-volt socket.
Tire Pressure Monitoring System(TPMS)–U.S models only
NOTE
USA – FCC ID: KR5S122780002
This device complies with part 15 of theFCC rules. Operation is subject to the fol-lowing conditions: (1) This device may notcause harmful interference, and (2) thisdevice must accept any interferencereceived, including interference that maycause undesired operation.
The tire pressure monitoring system uses sen-sors mounted in the tire valves to check infla-tion pressure levels. When the vehicle ismoving at a speed of approximately 20 mph(30 km/h) or faster, these sensors transmitinflation pressure data to a receiver located inthe vehicle.
06 Maintenance and specifications
Wheels and tires
06
262
When low inflation pressure is detected, TPMSwill light up the tire pressure warning light( ) (also referred to as a telltale) in theinstrument panel, and will display a message inthe text window. The wording of this messageis determined by the degree of inflation pres-sure loss.
NOTE
If a fault occurs in TPMS, the tire pressurewarning light will flash for approximately1 minute and TIRE PRESS SYSTSERVICE REQUIRED will be displayed.
Each tire, including the spare (if provided),should be checked monthly when cold andinflated to the inflation pressure recommendedby the vehicle manufacturer on the vehicleplacard or tire inflation pressure label. (If yourvehicle has tires of a different size than the sizeindicated on the vehicle placard or tire inflationpressure label, you should determine theproper tire inflation pressure for those tires.)
As an added safety feature, your vehicle hasbeen equipped with a tire pressure monitoringsystem (TPMS) that illuminates a low tire pres-sure telltale when one or more of your tires issignificantly under-inflated. Accordingly, whenthe low tire pressure telltale illuminates, youshould stop and check your tires as soon as
possible, and inflate them to the proper pres-sure. Driving on a significantly under-inflatedtire causes the tire to overheat and can lead totire failure. Under-inflation also reduces fuelefficiency and tire tread life, and may affect thevehicle's handling and stopping ability.
Please note that the TPMS is not a substitutefor proper tire maintenance, and it is the driv-er's responsibility to maintain correct tire pres-sure, even if under-inflation has not reachedthe level to trigger illumination of the TPMS lowtire pressure telltale.
Your vehicle has also been equipped with aTPMS malfunction indicator to indicate whenthe system is not operating properly. TheTPMS malfunction indicator is combined withthe low tire pressure telltale. When the systemdetects a malfunction, the telltale will flash forapproximately one minute and then remaincontinuously illuminated. This sequence willcontinue upon subsequent vehicle start-ups aslong as the malfunction exists. When the mal-function indicator is illuminated, the systemmay not be able to detect or signal low tirepressure as intended. TPMS malfunctions mayoccur for a variety of reasons, including theinstallation of replacement or alternate tires orwheels on the vehicle that prevent the TPMSfrom functioning properly. Always check theTPMS malfunction telltale after replacing one
or more tires or wheels on your vehicle toensure that the replacement or alternate tiresand wheels allow the TPMS to continue tofunction properly.
NOTE
TPMS indicates low tire pressure but doesnot replace normal tire maintenance. Forinformation on correct tire pressure, pleaserefer to the Tire inflation pressure tables orconsult your Volvo retailer.
Erasing warning messagesWhen a low tire pressure warning message hasbeen displayed, and the tire pressure warninglight has come on:
1. Use a tire pressure gauge to check theinflation pressure of all four tires.
2. Re-inflate the tire(s) to the correct pressure(consult the tire pressure placard or thetables on pages 246 and 247.
3. In certain cases, it may be necessary todrive the vehicle for several minutes at aspeed of 20 mph (30 km/h) or faster. Thiswill erase the warning text and the warninglight will go out.
06 Maintenance and specifications
Wheels and tires
06
263
WARNING
Incorrect inflation pressure could lead to tirefailure, resulting in a loss of control of thevehicle.
Changing wheels with TPMSPlease note the following when changing orreplacing the factory installed TPMS wheels/tires on the vehicle:
• Only the factory-mounted wheels areequipped with TPMS sensors in the valves.
• If the vehicle is equipped with a temporaryspare tire, this tire does not have a TPMSsensor.
• If wheels without TPMS sensors are moun-ted on the vehicle, TIRE PRESS SYSTSERVICE REQUIRED will be displayedeach time the vehicle is driven above25 mph (40 km/h) for 10 minutes or more.
• Once TPMS sensors are properly installed,the warning message should not reappear.If the message is still displayed, drive thevehicle for several minutes at a speed of20 mph (30 km/h) or faster to erase themessage.
• Volvo recommends that TPMS sensors befitted on all wheels used on the vehicle.Volvo does not recommend moving sen-sors back and forth between sets ofwheels.
NOTE
• If you change to tires with a differentrecommended inflation pressure, theTPMS system must be recalibrated tothese tires. This must be done by atrained and qualified Volvo service tech-nician.
• If a tire is changed, or if the TPMS sen-sor is moved to another wheel, the sen-sor's seal, nut, and valve core should bereplaced.
• When installing TPMS sensors, thevehicle must be parked for at least15 minutes with the ignition off. if thevehicle is driven within 15 minutes, aTPMS error message will be displayed.
CAUTION
When inflating tires with TPMS valves, pressthe pump's mouthpiece straight onto thevalve to help avoid bending or otherwisedamaging the valve.
06 Maintenance and specifications
Vehicle care
06
264
Washing the car
WARNING
Be sure that the compressor is not con-nected to a 12-volt socket while replacingthe container.
The following points should be kept in mindwhen washing and cleaning the car:
• The car should be washed at regular inter-vals since dirt, dust, insects and tar spotsadhere to the paint and may cause dam-age. To help prevent corrosion, it is partic-ularly important to wash the car frequentlyin the wintertime.
• Avoid washing your car in direct sunlight.Doing so may cause detergents and waxto dry out and become abrasive. To avoidscratching, use lukewarm water to softenthe dirt before you wash with a softsponge, and plenty of sudsy water.
• Bird droppings: Remove from paintworkas soon as possible. Otherwise the finishmay be permanently damaged.
• A detergent can be used to facilitate thesoftening of dirt and oil.
• A water-soluble grease solvent may beused in cases of sticky dirt. However, usea wash place equipped with a drainageseparator.
• Dry the car with a clean chamois andremember to clean the drain holes in thedoors and rocker panels.
• Tar spots can be removed with keroseneor tar remover after the car has beenwashed.
• A stiff-bristle brush and lukewarm soapywater can be used to clean the wiperblades. Frequent cleaning of the wind-shield and wiper blades improves visibilityconsiderably and also helps prolong theservice life of the wiper blades.
• Wash off the dirt from the underside (wheelhousings, fenders, etc).
• In areas of high industrial fallout, more fre-quent washing is recommended.
• After cleaning the engine, the spark plugwells should be inspected for water andblown dry if necessary.
NOTE
When washing the car, remember to removedirt from the drain holes in the doors andsills.
CAUTION
• During high pressure washing, thespray mouthpiece must never be closerto the vehicle than 13" (30 cm). Do notspray into the locks.
• Dirt, snow, etc., on the headlights canreduce lighting capacity considerably.Clean the headlights regularly, forexample when refueling.
• When washing or steam cleaning theengine, avoid spraying water or steamdirectly on the electrical components ortoward the rear side of the engine. Spe-cial moonroof cautions:
• Always close the moonroof and sunshade before washing your vehicle.
• Never use abrasive cleaning agents onthe moonroof.
• Never use wax on the rubber sealsaround the moonroof.
Exterior componentsVolvo recommends the use of special cleaningproducts, available at your Volvo retailer, forcleaning colored plastic, rubber, or ornamentalcomponents such as chromed strips on theexterior of your vehicle. The instructions forusing these products should be followed care-
06 Maintenance and specifications
Vehicle care
06
265
fully. Solvents or stain removers should not beused.
CAUTION
• Avoid waxing or polishing plastic or rub-ber components
• Polishing chromed strips can wearaway or damage the surface
• Polishes containing abrasive sub-stances should not be used
Automatic car wash• We do NOT recommend washing your car
in an automatic wash during the first sixmonths (because the paint will not havehardened sufficiently).
• An automatic wash is a simple and quickway to clean your car, but it is worthremembering that it may not be as thor-ough as when you yourself go over the carwith sponge and water. Keeping the under-body clean is most important, especially inthe winter. Some automatic washers donot have facilities for washing the under-body.
CAUTION
• Before driving into an automatic carwash, turn off the optional rain sensorto avoid damaging the windshield wip-ers.
• Make sure that side view mirrors, auxil-iary lamps, etc, are secure, and that anyantenna(s) are retracted or removed.Otherwise there is risk of the machinedislodging them.
• Chromed wheels: Clean chrome-plated wheels using the same deter-gents used for the body of the vehicle.Aggressive wheel-cleaning agents canpermanently stain chrome-platedwheels.
WARNING
• When the vehicle is driven immediatelyafter being washed, apply the brakes,including the parking brake, severaltimes in order to remove any moisturefrom the brake linings.
• Engine cleaning agents should not beused when the engine is warm. Thisconstitutes a fire risk.
Exterior lightingCondensation may form temporarily on theinside of the lenses of exterior lights such as
headlights, fog lights, or taillights. This is nor-mal and the lights are designed to withstandmoisture. Normally, condensation will dissi-pate after the lights have been on for a shorttime.
Polishing and waxing• Normally, polishing is not required during
the first year after delivery, however, wax-ing may be beneficial.
• Before applying polish or wax the vehiclemust be washed and dried. Tar spots canbe removed with kerosene or tar remover.Difficult spots may require a fine rubbingcompound.
• After polishing use liquid or paste wax.
• Several commercially available productscontain both polish and wax.
• Waxing alone does not substitute for pol-ishing a dull surface.
• A wide range of polymer-based waxes canbe purchased today. These waxes are easyto use and produce a long-lasting, high-gloss finish that protects the bodyworkagainst oxidation, road dirt and fading.
• Do not polish or wax your vehicle in directsunlight (the surface of the vehicle shouldnot be warmer than 113 °F (45 °C).
06 Maintenance and specifications
Vehicle care
06
266
CAUTION
Volvo does not recommend the use of long-life or durable paint protection coatings,some of which may claim to prevent pitting,fading, oxidation, etc. These coatings havenot been tested by Volvo for compatibilitywith your vehicle's clear coat. Some of themmay cause the clear coat to soften, crack,or cloud. Damage caused by application ofpaint protection coatings may not be cov-ered under your vehicle's paint warranty.
Cleaning the interiorOnly use cleaning agents and car care prod-ucts recommended by Volvo. Clean regularlyand follow the instructions included with thecar care product.
Upholstery care
FabricClean with soapy water or a detergent. Formore difficult spots caused by oil, ice cream,shoe polish, grease, etc., use a clothing/fabricstain remover. Consult your Volvo retailer.
AlcanteraTM suede-like materialSuede-like upholstery can be cleaned with asoft cloth and mild soap solution.
Leather careVolvo's leather upholstery is manufacturedwith a protectant to repel soiling. Over time,
sunlight, grease and dirt can break down theprotection. Staining, cracking, scuffing, andfading can result.
Volvo offers an easy-to-use, non-greasyleather care kit formulated to clean and beau-tify your vehicle's leather, and to renew theprotective qualities of its finish. The cleanerremoves dirt and oil buildup. The light creamprotectant restores a barrier against soil andsunlight.
Volvo also offers a special leather softener thatshould be applied after the cleaner and pro-tectant. It leaves leather soft and smooth, andreduces friction between leather and other fin-ishes in the vehicle.
Volvo recommends cleaning, protecting andconditioning your vehicle's leather two to fourtimes a year. Ask your Volvo retailer aboutLeather Care Kit 951 0251 and Leather Soft-ener 943 7429.
Cleaning leather upholstery1. Pour leather cleaner on a damp sponge
and squeeze it until the cleaner foams.
2. Apply the foam to the stain by moving thesponge with circular movements.
3. Dampen the stain thoroughly with thesponge. Let the sponge absorb the stain,do not rub.
4. Dry the stain with soft paper towels or atowel, and allow the leather to dry com-pletely.
Protecting leather upholstery1. Put a small amount of protectant cream on
a cloth and apply a thin coating of creamto the upholstery with light circular move-ments.
2. Allow the leather to dry for 20 minutes.
This will help the leather resist staining andprotect against sunlight's harmful UV rays.
06 Maintenance and specifications
Vehicle care
06
267
CAUTION
• Under no circumstances should gaso-line, naphtha or similar cleaning agentsbe used on the plastic or the leathersince these can cause damage.
• Take extra care when removing stainssuch as ink or lipstick since the coloringcan spread.
• Use solvents sparingly. Too much sol-vent can damage the seat padding.
• Start from the outside of the stain andwork toward the center.
• Sharp objects (e.g. pencils or pens in apocket) or Velcro fasteners on clothingmay damage the textile upholstery.
• Clothing that is not colorfast, such asnew jeans or suede garments, may stainthe upholstery.
Cleaning the seat beltsClean only with lukewarm water and a mildsoap solution.
Cleaning floor matsThe floor mats should be vacuumed or brushedclean regularly, especially during winter whenthey should be taken out for drying. Spots ontextile mats can be removed with a mild deter-
gent. For best protection in winter, Volvo rec-ommends the use of Volvo rubber floor mats.Consult your Volvo retailer.
Spots on interior plastic, metal, or woodsurfacesCleaning interior plastic components shouldbe done with a cleaning agent speciallydesigned for this purpose. Consult your Volvoretailer.
Touching up paintwork
Paint code on the model plate1
Paint damage requires immediate attention toavoid rusting. Make it a habit to check the finishregularly, for instance washing the vehicle.Touch-up if necessary.
Paint repairs require special equipment andskill. Contact your Volvo retailer for any exten-sive damage.
Minor scratches can be repaired by usingVolvo touch-up paint.
Color codeMake sure you have the right color. The colorcode number is stated on the model plate.
Minor stone chips and scratchesMaterial:
• Primer – can
• Paint – touch-up pen
• Brush
• Masking tape
If the stone chip has not gone down to the baremetal and an undamaged color coat remains,you can add paint immediately after removingdirt.
NOTE
When touching up the vehicle, it should beclean and dry. The surface temperatureshould be above 60 °F (15 °C).
1 see page 269 for the location of the model plate.
06 Maintenance and specifications
Vehicle care
06
268
Minor scratches on the surfaceIf the stone chip has not penetrated down tothe metal and an undamaged layer of paintremains, the touch-up paint can be applied assoon as the spot has been cleaned.
Repairing stone chips
G02
1832
1. Place a strip of masking tape over the dam-aged surface. Pull the tape off so that anyloose flakes of paint adhere to it.
2. Thoroughly mix the primer and apply it witha small brush.
3. When the primer surface is dry, the paintcan be applied using a brush. Mix the paintthoroughly; apply several thin paint coatsand let dry after each application.
4. If there is a longer scratch, you may wantto protect surrounding paint by masking itoff
5. After a few days, polish the touched-upareas. Use a soft rag and a small amountof polish.
06 Maintenance and specifications
Label information
06
269
Location of labels
G03
2549
06 Maintenance and specifications
Label information
06
270
List of labelsModel plate. Vehicle Identification Num-ber (VIN). Codes for color and upholstery,etc.
Federal Motor Vehicle Safety Standards(FMVSS) specifications (USA) and Min-istry of Transport (CMVSS) standards(Canada). Your Volvo is designed to meetall applicable safety standards, as evi-denced by the certification label on thefacing side of the driver's door. For furtherinformation regarding these regulations,please consult your Volvo retailer.
Loads and Tire Pressures. The appear-ance of the decal will vary, depending onthe market for which the vehicle isintended. See also page 244.
Vehicle Identification Number (VIN). TheVIN plate is located on the top left surfaceof the dashboard. The Vehicle Identifica-tion Number (VIN) should always be quo-ted in all correspondence concerning yourvehicle with the retailer and when orderingparts.
Vehicle Emission Control Information.Your Volvo is designed to meet all appli-cable emission standards, as evidenced bythe certification label on the underside ofthe hood. For further information regardingthese regulations, please consult yourVolvo retailer.
06 Maintenance and specifications
Specifications
06
271
Dimensions–S80/S80 Executive
G01
7403
Position Dimension in (mm)
A Wheelbase 111.6 (2835)
B Length 191 (4851)
C Load length, floor, seatback down 75.9 (1927)
D Load length, floor 43.1 (1094)
E Height 58.8 (1493)
F Track, front 62.5 (1588)
G Track, rear 62.4 (1585)
06 Maintenance and specifications
Specifications
06
272
Position Dimension in (mm)
H Width 73.3 (1861)
I Width, incl. door mirrors 82.9 (2106)
Weights
Category USA Canada
Gross vehicle weight 6-cyl. FWDA: 4820 lbs
6-cyl. turbo AWDB: 5020 lbs
8-cyl. AWD: 5110 lbs
S80 Executive 6 cyl. turbo AWD: 5020 lbs
S80 Executive 8 cyl. AWD: 5110 lbs
6-cyl. FWD: 2190 kg
6-cyl. turbo AWD: 2280 kg
8-cyl. AWD: 2320 kg
S80 Executive 6 cyl. turbo AWD: 2280 kg
S80 Executive 8 cyl. AWD: 2320 kg
Capacity weight 6-cyl. FWD: 905 lbs
6-cyl. Turbo AWD: 890 lbs
8-cyl. AWD: 890 lbs
S80 Executive 6 cyl. turbo AWD: 890 lbs
S80 Executive 8 cyl. AWD: 890 lbs
6-cyl. FWD: 410 kg
6-cyl. turbo AWD: 400 kg
8-cyl. AWD: 400 kg
S80 Executive 6 cyl. turbo AWD: 400 kg
S80 Executive 8 cyl. AWD: 400 kg
Permissible axle weights, front 6-cyl. FWD: 2690 lbs
6-cyl. turbo AWD: 2750 lbs
8-cyl. AWD: 2860 lbs
S80 Executive 6 cyl. turbo AWD: 2750 lbs
S80 Executive 8 cyl. AWD: 2860 lbs
6-cyl. FWD: 1220 kg
6-cyl. AWD turbo: 1250 kg
8-cyl. AWD: 1300 kg
S80 Executive 6 cyl. turbo AWD: 1250 kg
S80 Executive 8 cyl. AWD: 1300 kg
06 Maintenance and specifications
Specifications
06
273
Category USA Canada
Permissible axle weights, rear 6-cyl. FWD: 2270 lbs
6-cyl. turbo AWD: 2360 lbs
8-cyl. AWD: 2380 lbs
S80 Executive 6 cyl. turbo AWD: 2360 lbs
S80 Executive 8 cyl. AWD: 2380 lbs
6-cyl. FWD: 1030 kg
6-cyl. turbo AWD: 1070 kg
8-cyl. AWD: 1080 kg
S80 Executive 6 cyl. turbo AWD: 1070 kg
S80 Executive 8 cyl. AWD: 1080 kg
Curb weight 3760–4060 lbs
S80 Executive: 4005–4070 lbs
1700–1860 kg
S80 Executive: 1814–1864 kg
Max. roof load 220 lbs 100 kg
Max. trailer weights Without brakes: 1650 lbs
With brakes, 1 7/8” ball: 2,000 lbs
With brakes, 2” ball: 3,300 lbs
Without brakes: 750 kg
With brakes, 1 7/8” ball: 900 kg
With brakes, 2” ball: 1500 kg
Max. tongue weight 165 lbs 75 kg
A FWD = Front Wheel DriveB AWD = All Wheel Drive
Engine specifications
Specification/Model 3.2 6-cyl. 3.0T V8
Engine designation B6324S B6304T2 B8444S
Output (kW/rps) 175/103 210/93 232/99
Output (hp/rpm) 235/6200 281/5600 311/5950
06 Maintenance and specifications
Specifications
06
274
Specification/Model 3.2 6-cyl. 3.0T V8
Torque (Nm/rps) 320/53 400/25 – 80 440/66
Torque (ft. lbs./rpm) 236/3200 295/1500 – 4800 325/3950
No. of cylinders 6 6 8
Bore (in/mm) 3.3/84 3.23/82 3.7/94
Stroke (in/mm) 3.78/96 3.67/93.2 3.13/79.5
Displacement 3.19 liters (194.8 cu. in.) 2.95 liters (175 cu. in.) 4.4 liters (269.4 cu. in.)
Compression ratio 10.8:1 9.3:1 10.4:1
Engine oilEngine oil must meet the minimum ILSACspecification GF-4, API SL, or ACEA A1/B1.Lower quality oils may not offer the same fueleconomy, engine performance, or engine pro-tection.
Volvo recommends Castrol.
Depending on your driving habits, premium orsynthetic oils may provide superior fuel econ-omy and engine protection. Consult your Volvoretailer for recommendations on premium orsynthetic oils.
Oil additives must not be used.
Synthetic oil is not used when the oil ischanged at the normal maintenance services.This oil is only used at customer request, atadditional charge. Please consult your Volvoretailer.
Oil viscosity (stable ambienttemperatures)
Operation in hot climatesWhen temperatures exceed 104 °F (40 °C) inyour area, Volvo recommends, for the protec-tion of your engine, that you use a heavierweight oil, such as such as SAE 5W-40 or0W-40. See the viscosity chart.
G02
3491
Viscosity table
Operation in temperate climatesIncorrect viscosity oil can shorten engine life.Under normal use when temperatures do notexceed 104 °F (40 °C), SAE 5W-30 will provide
06 Maintenance and specifications
Specifications
06
275
good fuel economy and engine protection. Seethe viscosity chart.
Extreme engine operationSynthetic oils meeting SAE 0W-30 or 0W-40and complying with oil quality requirements arerecommended for driving in areas of sustainedtemperature extremes (hot or cold), when tow-ing a trailer over long distances, and for pro-longed driving in mountainous areas.
American Petroleum Institute (API)symbol
G02
2917
The API Service Symbol "donut" is divided intothree parts:
• The upper section describes the oil's per-formance level.
• The center identifies the oil's viscosity.
• The lower section indicates whether the oilhas demonstrated energy-conservingproperties in a standard test in comparisonto a reference oil.
06 Maintenance and specifications
Specifications
06
276
Oil volume
Engine model Oil volume between MIN andMAX
Volume (incl. filter)
3.2 (6-cyl.) B6324S 0.85 US qts (0.8 liters) 7.7 US qts (7.3 liters)
3.0T (6 cyl.) B6304T2 1.1 US qts (1.2 liters) 7.8 US qts (7.4 liters)
V8 B8444S 1.0 US qts (1.1 liters) 7.4 US qts (7.0 liters)
Other fluids and lubricants
Fluid System Volume Specification
Transmission oilA Automatic (TF-80SC) 7.4 US qts (7.0 liters) Transmission fluid JWS 3309
Coolant 3.2 (6-cyl.) 9.4 US qts. (8.9 liters) Coolant with corrosion inhibitormixed with water (50/50 mix), seepackaging.3.0T 9.4 US qts. (8.9 liters)
V8 10.7 US qts. (10.2 liters)
Air conditioning 3.2 6-cyl. 1.4 lbs (620 g) Refrigerant: R134a (HFC134a),PAG oil
V8 1.5 lbs (700 g)
Brake fluid 0.63 US qts (0.6 liters) DOT 4+
Power steering 1.26 US qts (1.2 liters) Power steering fluid WSSM2C204-A2 or equivalent product.
06 Maintenance and specifications
Specifications
06
277
Fluid System Volume Specification
Washer fluid 6.8 US qts (6.5 liters)
4.7 US qts (4.5 litersB)
Use a washer antifreeze recom-mended by Volvo, mixed withwater.
Fuel tank volume 18.5 US gallons (70 liters)
A Under normal driving conditions the transmission oil does not need changing during its service life. However, it may be necessary under adverse driving conditions.B Models without headlight washers
Electrical system
General information12 volt system with a voltage-regulated alter-nator. Single pole system in which the chassisand engine block are used as conductors. Thenegative terminal is connected to the chassis.
Performance, battery
Engine 3.26-cyl./3.0T
V8
Voltage (V) 12 12
Cold startcapacity (A)
520 800A
Reserve capacity(min)
100 120
A Certain models may be equipped with 600 or 700 A batteries,depending on the options chosen.
WARNING
PROPOSITION 65 WARNING!
Battery posts, terminals, and related acces-sories contain lead and lead compounds,chemicals known to the state of Californiato cause cancer and reproductive harm.Wash hands after handling.
CAUTION
If the battery is replaced, replace it with abattery of the same cold start capacity andreserve capacity as the original (see thedecal on the battery).
06 Maintenance and specifications
Volvo programs
06
278
Volvo On Call Roadside AssistanceYour new Volvo comes with a four year ONCALL roadside assistance. Additional informa-tion, features, and benefits are described in aseparate information package in your glovecompartment.
If you require assistance, dial:
American customers: 1-800-638-6586(1-800-63-VOLVO)
Canadian customers: 1-800-263-0475
Technician certificationIn addition to Volvo factory training, Volvo sup-ports certification by the National Institute forAutomotive Service Excellence (A.S.E.). Certi-fied technicians have demonstrated a highdegree of competence in specific areas.Besides passing exams, each technician mustalso have worked in the field for two or moreyears before a certificate is issued. These pro-fessional technicians are best able to analyzevehicle problems and perform the necessarymaintenance procedures to keep your Volvo atpeak operating condition.
07 Index
07
279
1, 2, 3 ...
12-volt sockets........................................ 189
A
Accessory installation warning.................... 9
Active Bi-Xenon headlights........................ 89
Active chassis system............................. 156
Active yaw control................................... 154
Adaptive cruise control.... 165, 166, 167, 168
Airbagsdisconnecting the front passenger’sside................................................. 23, 24front.......................................... 19, 20, 21inflatable curtain................................... 29side impact........................................... 27
Air conditioning........................................ 128
Air distribution.......................................... 125
Air distribution table................................. 130
Air vents................................................... 126
All Wheel Drive......................................... 111
Anti-freeze....................................... 196, 218
Anti-lock brake system............................ 112warning light......................................... 72
Approach lighting................................. 52, 92
Audio systemaudio functions................................... 134CD player/changer...................... 135, 136menu control....................................... 132overview.............................................. 131radio functions.................................... 137Rear seat entertainment (option)........ 148Sirius satellite radio............ 138, 140, 141sound settings.................................... 134steering wheel keypad........................ 131USB/iPOD connector.......................... 132
Auto-dim rearview mirror........................... 99
Automatic locking retractor....................... 34
Automatic transmissionGeartronic................................... 109, 110general description..................... 109, 110oil........................................................ 276shiftlock override................................ 110
Axle weight.............................................. 250
B
Batterychanging..................................... 230, 231maintenance....................................... 230remote control, replacing..................... 55specifications...................................... 277warning symbols................................. 230
Black box............................................. 8, 212
Blind Spot Information System(BLIS)....................................... 183, 184, 185
Booster cushions....................................... 41
Brake lights................................................ 89emergency brake lights........................ 89
Brake systemchecking fluid level............................. 218emergency brake assistance.............. 113fluid..................................................... 276general information............................. 112warning light......................................... 74
Bulbscargo area lighting.............................. 225footwell lighting................................... 225headlights........................... 220, 221, 222introduction......................................... 220license plate lights.............................. 225
07 Index
07
280
side marker lights............................... 223specifications...................................... 226
C
Capacity weight....................................... 250
Cargo areachanging bulbs................................... 225
Catalytic converter................................... 200
CD player/changer........................... 135, 136
Cell phone, hands-free connection......... 142
Central locking system, introduction......... 50
Chains...................................................... 251
Check engine light..................................... 72
Child restraintsrecalls and registration......................... 44
Child restraint systems.............................. 35booster cushions.................................. 41convertible seats.................................. 39infant seats........................................... 37ISOFIX/LATCH anchors........................ 42top tether anchors................................ 43
Child safety.......................................... 33, 34booster cushions.................................. 41child restraint systems.......................... 35
convertible seats.................................. 39infant seats........................................... 37
Child safety locks...................................... 47
Climate system........................................ 128air distribution............................. 125, 130air vents.............................................. 126Interior Air Quality System.................. 125introduction......................................... 124passenger compartment filter............ 125refrigerant........................................... 124
Clockanalogue............................................... 76
Clock, setting............................................. 76
Cold weather driving................................ 196
Collision warning system......................... 159
Compass in rearview mirror..................... 152
Conserving electrical current................... 195
Convertible seats....................................... 39
Coolant............................................ 218, 276
Cooling system, general information....... 195
Courtesy lighting.................................. 91, 92
Crash mode............................................... 32
Cruise control.................................. 157, 158adaptive...................... 165, 166, 167, 168
Curb weight............................................. 250
Current, conserving................................. 195
D
Defroster.................................................. 128
Detachable key blade................................ 55
Disconnecting the front passenger’s air-bag....................................................... 23, 24
Dome lighting....................................... 91, 92
Door mirrors............................................... 98
Driver distraction warning............................ 9
Driving economically................................ 194
Driving in cold weather............................ 196
Driving through water.............................. 195
E
ECC.......................................... 127, 128, 129
Economical driving.................................. 194
Electric parking brake.............................. 114
Electronic Climate Control....... 126, 128, 129air distribution table............................ 130
07 Index
07
281
Interior Air Quality System.................. 129ventilated seats................................... 127
Emergency brake lights............................. 89
Emergency locking retractor...................... 34
Emergency starting.................................. 107
Emergency towing........................... 207, 208
Emission inspection readiness................ 213
Engineoverheating........................................... 75specifications...................................... 273starting................................................ 105starting with keyless drive.................. 106
Engine compartment overview................ 215
Engine oilchecking............................................. 216low pressure warning light.................... 73specifications...................................... 274volumes.............................................. 276
Environment............................................... 10
Eyelets for anchoring loads..................... 202
F
Federal Clean Air Act............................... 212
Fluid specifications.................................. 276
Fog lightsfront...................................................... 73front/rear............................................... 89
Four C (active chassis system)................ 156
Front airbags.................................. 19, 20, 21disconnecting passenger’s side air-bag.................................................. 23, 24
Front fog lights..................................... 73, 89
Front park assist.............................. 180, 182
Front seats..................................... 80, 81, 85heated................................................. 127lumbar support (S80 Executive only).... 85massage function (S80 Executive only) 85moving passenger's seat (S80 Execu-tive only)................................................ 86
Fuel filler cap............................................ 200
Fuel filler door, opening........................... 200
Fuel level warning light.............................. 73
Fuel requirements............................ 198, 199
Fuel tank volume...................................... 276
Fuses............................... 233, 234, 237, 240
G
Gasoline requirements............................. 199
Gas tank volume...................................... 276
Gauges...................................................... 71
Geartronic................................................ 110
Geartronic automatic transmission.. 109, 110
Generator warning light............................. 74
Glossary of tire terminology..................... 249
Grocery bag holder.................................. 203
Gross vehicle weight............................... 250
H
Hands-free connection (cell phone) (Cellphone, hands-free connection)................ 142
Hazard warning flashers............................ 90
Headlightsactive bi-xenon lights........................... 89changing bulbs........................... 221, 222high/low beams.................................... 88high beam flash.................................... 88switch................................................... 88
Headlight washers..................................... 95
07 Index
07
282
Heartbeat sensor (alarm system)............... 53
Heated front seats................................... 127
Heated oxygen sensors........................... 201
Heated rear seats.................................... 127
High beams................................................ 88indicator light........................................ 73
Home safe lighting..................................... 92
Hood, opening/closing............................ 215
Horn........................................................... 87
I
Ignition modes........................................... 78
Immobilizer................................................ 50
Important information.................................. 8
Indicator lights............................... 71, 72, 73
Infant seats................................................ 37
Inflatable Curtain........................................ 29
Inflation pressure............................. 244, 245
Inflation pressure tables.................. 246, 247
Information lights........................... 71, 72, 73
Information symbol.................................... 73
Inspection readiness................................ 213
Instrument lighting..................................... 88
Instrument overview............................ 70, 71
Instrument panel...................................... 121
Interior Air Quality System....................... 125
Interior lighting..................................... 91, 92
iPOD connector (audio system)............... 132
ISOFIX anchors.......................................... 42
J
Jackattaching............................................. 254location of........................................... 254
Jump starting........................................... 107
K
Key blade............................................. 50, 55
Keyless drivestarting the engine.............................. 106
L
Labelslist of................................................... 270location of........................................... 269
LATCH anchors......................................... 42
Leather care............................................. 266
Lighting panel............................................ 88
Load anchoring eyelets........................... 202
Loading the vehicle.......................... 202, 250roof loads............................................ 204
Locking the vehicle.................................... 52
Locks, child safety..................................... 47
Low beams................................................ 88
Low fuel level warning light........................ 73
Low oil pressure warning light................... 73
M
Main instrument panel............................. 121
Maintenance............................................ 212performed by the owner..................... 213
Malfunction indicator light......................... 72
07 Index
07
283
Menu system........................................... 120overview.............................................. 120
Messages in the instrument panel........... 121
Mirrorsdefroster............................................... 99power door........................................... 98rearview, auto-dim function.................. 99retractable............................................. 98vanity.................................................. 189
Moonroof......................................... 100, 101
Motor oilchecking............................................. 216specifications...................................... 274volumes.............................................. 276
O
Occupant safety........................................ 14
Occupant weight sensor...................... 23, 24
Octane recommendations....................... 199
Odometer, trip........................................... 76
Oilspecifications...................................... 274volumes.............................................. 276
On Call Roadside Assistance.................. 278
Overhead courtesy lighting.................. 91, 92
Overheating, engine................................... 75
Oxygen sensors, heated.......................... 201
P
Paint, touching up.................................... 267
Park assist....................................... 180, 182
Parking brakeelectric, applying/releasing................. 114warning light......................................... 73
Parking lights............................................. 89changing bulbs................................... 222
Personal Car Communicator, unique func-tions........................................................... 53
Polishing.................................................. 266
Power front seatmemory function................................... 80with keyless drive................................. 81
Power mirrors............................................ 98defroster............................................... 99
Power moonroof.............................. 100, 101
Power steeringspeed-dependent............................... 156
Power steering fluid......................... 218, 276
Power windows................................... 96, 97laminated glass..................................... 97
Pregnancy, using seat belts during........... 17
PROPOSITION 65 WARN-ING..................................... 10, 107, 231, 277
R
RadioSirius satellite radio............ 138, 140, 141
Radio functions........................................ 137
Rain sensor................................................ 94
READ button............................................ 121
Rear fog light............................................. 89
Rear park assist............................... 180, 182
Rear seat entertainment (option)............. 148
Rear seatsfolding................................................... 82heated................................................. 127
Rearview mirrorauto-dim function................................. 99compass............................................. 152
Rear window defroster.............................. 99
07 Index
07
284
Recalls, child restraints.............................. 44
Refrigerant............................................... 276
Refrigerator (S80 Executive only)............ 190
Refueling.......................................... 198, 199fuel filler cap....................................... 200fuel filler door...................................... 200fuel tank volume................................. 276
Registering child restraints........................ 44
Remote control.......................................... 50approach lighting.................................. 52common functions................................ 52immobilizer........................................... 50key blade........................................ 50, 55key memory.......................................... 50locking the vehicle................................ 52Personal Car Communicator.......... 52, 53replacing the battery............................. 55unlocking the vehicle............................ 52
Reporting safety defects............................ 15
Roadside Assistance............................... 278
Roof loads................................................ 204
S
S80 Executiveanalogue clock..................................... 76front seat lumbar support..................... 85front seat massage function................. 85glasses................................................ 190moving the front passenger's seat....... 86refrigerator.......................................... 190
Safety, occupant........................................ 14
Safety defects, reporting........................... 15
Seat beltsAutomatic locking retractor/Emergencylocking retractor.................................... 34buckling................................................ 16maintenance......................................... 16pretensioners........................................ 16reminder................................................ 16reminder warning light.......................... 74securing child restraint sys-tems.......................................... 37, 39, 41unbuckling............................................ 16use during pregnancy........................... 17using..................................................... 16
Seats, front.......................................... 80, 85
Side door mirrors....................................... 98
Side impact airbags................................... 27
Side marker lights, changing bulbs......... 223
Sirius satellite radio.................. 138, 140, 141
Snow chains............................................ 251
Snow tires................................................ 251
Sound settings, audio system................. 134
Spare tire................................................. 253
Speed-dependent steering...................... 156
Spin control............................................. 154
SRS............................................................ 18
Stability system........................................ 154indicator light........................................ 73
Starting the engine................................... 105with keyless drive............................... 106
Starting the vehicleafter a crash (crash mode).................... 32
Start inhibitor (immobilizer)........................ 50
Steering wheeladjusting............................................... 87horn....................................................... 87keypad.................................. 87, 120, 131
Stone chips, touching up......................... 267
Storage spaces........................................ 187
Studded tires........................................... 251
Sunroof (moonroof).......................... 100, 101
07 Index
07
285
Supplemental restraint system.................. 18warning light......................................... 74
T
Tailgatedriving with it open............................. 194
Telephone (cellular), hands-free connec-tion (Cell phone, hands-free connection). 142
Temporary spare tire............................... 253
Three-way catalytic converter................. 200
Tire designations..................................... 248
Tire Pressure Monitoring System.... 261, 262indicator light........................................ 73
Tiresage...................................................... 243changing from summer to winter........ 253glossary of terms................................ 249improving economy............................ 243inflation pressure........................ 244, 245inflation pressure tables............. 246, 247snow................................................... 251spare................................................... 253specifications...................................... 245storing................................................. 242studded............................................... 251
tire pressure monitoring system......... 261uniform tire quality grading................. 251
Top tether anchors (child restraint sys-tems).......................................................... 43
Touching up paint.................................... 267
Towing a trailer................................ 205, 206trailer hitch.......................................... 206
Towing the vehicle........................... 207, 208
Traction control........................................ 154
Trailer towing................................... 205, 206trailer hitch.......................................... 206
Transmissiongeneral description..................... 109, 110oil........................................................ 276shiftlock override................................ 110
Tread wear indicator................................ 242
Trip computer.......................................... 151
Trip odometers.......................................... 76
Trips, long distance................................. 195
Turn signalschanging bulbs................................... 223indicator lights................................ 73, 91
U
Uniform Tire Quality Grading................... 251
Unlocking the vehicle................................. 52
Upholstery care....................................... 266
V
Vanity mirror............................................. 189changing bulbs................................... 226
Vehicle Event Data............................... 8, 212
Vehicle loading................................. 202, 250roof loads............................................ 204
Vehicle maintenance................................ 212performed by the owner..................... 213
Vehicle weights........................................ 272
Ventilated seats....................................... 127
Volvo and the environment........................ 10
Volvo Inflatable Curtain.............................. 29
Volvo maintenance.................................. 212
Volvo On Call Roadside Assistance........ 278
Volvo programs........................................ 278
07 Index
07
286
W
Warning flashers, hazard........................... 90
Warning lights................................ 71, 72, 73
Warning symbol......................................... 75
Warning system, collision........................ 159
Warranties................................................ 212
Washer fluid..................................... 229, 276
Washersheadlight............................................... 95windshield............................................. 94
Water, driving through............................. 195
Waxing..................................................... 266
Weights.................................................... 272
Wheelschanging............................................. 254storing................................................. 242
Wheels and tires, introduction................. 242
Whiplash Protection System..................... 30
Windowspower.............................................. 96, 97
Windshieldrain sensor............................................ 94washers................................................ 95wipers/washers..................................... 94
Windshield washer fluid................... 229, 276
Windshield wipers.................................... 228
Wiper bladesreplacing windshield wipers............... 228
Recommended