View
29
Download
0
Category
Preview:
Citation preview
RMD AustraliaAscent-
Formwork
PRODUCT BROCHURE
Product OverviewAscent-formwork is a new guided climbing formwork system from RMD Australia. RMD developed Ascent-F with our customers to provide cutting edge equipment, which speeds cycle times and reduces labour costs. Ascent-F can also be operated hydraulically, which saves on crane costs and means you can operate in high wind or when the crane is being used elsewhere significantly improving cycle times.
FasterAscent-F is a new guided climbing formwork system developed to speed cycle times and reduce labour costs
Ascent-F can be lifted in high winds. If there's no crane or is it's being used somewhere else on the project, the Ascent hydraulic system can be used avoiding lost project time
Wall brackets can be quickly pre-mounted on the cast-in wall anchor before adding the connecting bolt. This is a fast job for a single worker
SaferAscent-F masts are safely extended as the equipment rises, giving significant time, labour and site space advantages
Safety and peace of mind for workers, because the highly visible Ascent Latch connects securely with the Ascent Wall Brackets. ELEV (Electronic Latch Engagement Verification) system further enhances operator confidence
Ascent components have been developed with manual handling and safety in mind. Pre-assembly of equipment can be carried out without cranes at ground level
EasierSuitable for a diverse range of projects. Constructs piers and straight or curved walls sloping by up to 20 degrees
At the end of the job, Ascent platforms can be removed by raising, lowering or moving directly away from the building thereby reducing required crane height
Ascent is suitable for all formwork systems, and can do inclined, stepped, circular or straight surfaces. Safety features were completely integrated into the system
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
1
ApplicationsGuided climbing formwork system for core and wall applications in multi-storey situations. Also highly suitable for LNG/CSG tanks. In fact it's suitable for a range of concrete slabs up to 450mm thick. Comes in 3 basic option variants.
Option 1The lowest cost option, which is used when the wall brackets and anchors can be retrieved from the following construction levels. This option requires two wall brackets and anchors per lift
Option 2This option is used when wall brackets and anchors need to be recovered from the wall with the progress of work. It requires a single wall bracket and anchor per wall lift
Option 3The option used when wall brackets and anchors need to be recovered from the wall with the progress of work and concrete finishing and/or hydraulic wall climbing are required. This option requires a single wall bracket and anchor per wall lift
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
2
Features & BenefitsAscent-Formwork is a new guided climbing formwork system developed with our customers, to speed cycle times and reduce labour costs. Ascent is fully adaptable to fit all formwork systems, and is suitable for inclined, stepped, circular or straight surfaces. All necessary safety features are completely integrated.
VersatileAscent-Formwork can be used with all formwork, including systems customers already have.
Starts from the first wall liftThe masts are safely extended in-situ, speeding early construction cycles, reducing labour and saving valuable site space.
Can be lifted in high winds and if no cranage is availableThe easy to use Ascent hydraulic system can be used to ensure you meet those tight construction deadlines.
Peace of mind for operativesThe highly visible Ascent latch connects securely with the Ascent Wall Brackets.
Components developed with manual handling in mindPre-assembly of equipment can be carried out without cranes at ground level.
Makes the job easyWall brackets can be pre-mounted on the cast-in wall anchor before adding the connecting bolt, making this a fast job for a single operative.
Increases your optionsAt the end of the job Ascent platforms can be removed by raising, lowering or moving directly away from the building, reducing the required crane height.
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
3
In DetailMast & Latch
Ascent Mast - StrengthManufactured from ultra-high yield, steel plate giving excellent strength to weight ratio making both manual and crane handling far easier.
Ascent Mast - Function through designInnovative design features include, mast mounts on first wall lift, no need to remove from the wall to extend length and an integral mast hook for mast extension.
Ascent Latch - Visual indicationManufactured from robust cast steel and brightly coloured for easy visual checking of engagement. The latch can be placed anywhere along a mast on a 150mm module, even at mast joints.
Ascent Latch - Design ingenuityThe Ascent latch includes a number of ingenious design features. It's spring loaded to ensure positive return action, a protected position between the mast webs which ensures snag-free operation, stowable in the retracted position so equipment can be lowered for removal if required. In addition, electronic verification of engagement is available, which is the red light pictured.
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
4
In DetailBracket & Hydraulics
Wall Bracket - Attach and guideThe Ascent Wall Bracket is used to attach the masts to the wall and provide guidance during lifting. Smoothly chamfered leading and trailing edges guide the mast through the wall brackets during lifting or lowering.
Wall Bracket - Optimised for usageOptimised to reduce weight and make manual handling easier. Other features include - removable mast guides which allow equipment to be craned directly away from the wall and an integrated handle, for easy carrying.
Wall Bracket - Cost reducingThe bracket is lightweight at only 13.2kg. A projecting boss on the rear of the bracket locates into the recess on the embedded anchor, enabling a labour saving single-man fix or removal of the bracket from the wall.
Hydraulic system - Maintain cycle timesEnables movement of the platforms without the need for a crane, useful during conditions when the crane is either winded off or is servicing other trades, allowing work to continue and maintaining fast cycle times.
Hydraulic system - Simple connectionThe system attaches to the bracket using a simple pin connection and is fully interchangeable between platform modules
Hydraulic system - Utilise onsite powerMovement is controlled by a single unit, powered by a 415v, 3 phase power, with equal raise speeds for safe, smooth movement.
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
5
In DetailRack and Trolley - Shaft Latch & Pocket
Rack and Trolley - Simple and easyThe Ascent Rack and Trolley assembly pins into the mast and attaches the formwork and main platform to the masts to enable Form adjustment. The smooth rack and pinion operation makes form movement easy along the 0.75m form roll-back.
Rack and Trolley - A range of movementsFurther adjustments come courtesy of diagonal turnbuckles which allow form tilt and the form jack which enables level and sideways transit.
Rack and Trolley - SafeA wedge action safety brake prevents accidental form movement - certified lifting shackles for safe raising of the platform. To ensure the assembly works smoothly, protected lubrication points are fitted and system covers are available to protect the running gear.
Shaft Latch and Pocket - Simple connectionsUsed with Superslim Soldiers to make a platform inside the shaft or core. The assembly, which is adjustable for length in 60mm increments, connects simply to each end of a Superslim Soldier and is adjustable in level from the platform.Shaft Latch and
Pocket - Integrated featuresDetails such as a robust latch which ensures positive engagement with every lift and a nylon wheel for snag-free lifting without marking the concrete face.
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
6
In DetailAccess and Wall Anchor Options
Access - Easier and saferA comprehensive range of access and safety equipment completes the system and enables free movement of workers to and between all work areas throughout the forming and lifting cycle.
Access - VersatileA level working platform with no trip hazards, mesh edge protection with toe board. Stop-end guardrails ensure safety during platform movement and an alloy ladder system with dedicated hatch locations provide safe access between levels.
Wall Anchor option 1Anchor secured by bolting through forms
Wall Anchor option 2Ascent Anchor Screw Ascent Anchor Screw (HTX20005)
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
7
Project References
PROJECTHilton Tower Hotel
REGIONEurope
STRUCTURESCommercial, Leisure
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
8
Components
Ascent-Formwork Masts easily mount on the first wall lift. There's no need to remove the mast from the wall to extend the length, just add a new section at the bottom of the wall. The 2.1m mast section only weighs 67kg, which enables assembly to be done without a crane, reducing costs.
Code Description Weight
AGX10001 Ascent Top Mast 64.0kg
AGX10002 Ascent Mast 2.1m 70.1kg
AGX10027 Ascent Half Mast 1.05m 33.7kg
Ascent-Formwork Masts
The Ascent Wall Bracket is used to attach the masts to the wall and provide guidance during lifting and has been optimised to reduce weight and ease manual handling. It has an integrated handle, to make carrying easy. The bracket is lightweight, only 13.2kg.
Code Description Weight
AGX10023 Ascent Wall Bracket 13.2kg
Ascent Bracket
Brightly coloured to facilitate visual checking of engagement and also spring loaded to ensure positive return action. It's very strong, having been manufactured from robust cast steel. Electronic verification of engagement is available.
Code Description Weight
AGX10022 Ascent Latch 8.30kg
Ascent Latch
The Ascent Platform Beam Assembly attaches the formwork and main platform to the Ascent masts and enables form adjustment. Its rack and pinion operation enables 750mm form roll back. Diagonal turnbuckles enable form tilt adjustment. Form jack enables adjustment of formwork level and sideways transit.
Code Description Weight
AGX10026 Ascent Platform Beam Assembly 132.3kg
Ascent Platform Beam Assembley
Ascent Zed Frame attaches RMD’s Superslim Soldier Screen extension to the mast and also supports the slab edge access platform.
Code Description Weight
AGX10004 Ascent Zed Frame 25.5kg
Ascent Zed Frame
Ascent Anchor Screws are recoverable, the screws are used to attach wall brackets, there removal eliminates the cost of lost items.
Code Description Weight
HTX20005 Ascent Anchor Screw 280mm 1.53kg
Ascent Anchor Screw
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
9
Components
Anchor Screw Removal Tool removes anchor screws quickly and easily so they can be used again.
Code Description Weight
AGX10038 Ascent Anchor Screw Removal Socket 0.86kg
Anchor Screw Removal Tool
Code Description Weight
AGX10007 Ascent Bracing Tube 2500mm 9.16kg
Ascent Bracing Tube
Code Description Weight
SSX10050 Superslim Soldier 400mm x 15 deg 13.7kg
Ascent-Formwork Angled Superslim Soldier
Code Description Weight
AGX10011 Ascent Platform Beam Strut 27.1kg
BNX30002 M30 x 375 Bolt (Grade 8.8) Black 2.3kg
BNX30004 M30 Hex Nut (Grade 8.8) Black 0.05kg
BNX24008 M24 x 100 Bolt (Grade 8.8) 0.44kg
BNX24010 M24 x 70 Bolt (Grade 8.8) 0.34kg
BNX12400 M24 Hex Nut 0.01kg
BNM16130 M16 x 130 Bolt (Grade 8.8) 0.30kg
BNX16002 M16 x 40 Bolt (Grade 8.8) 0.09kg
BNU16001 M16 Hex Nut (Grade 8) 0.03kg
AGX10031 Ascent Pivot Pin 24mm dia 0.47kg
SSU10011 R Clip 5mm 0.03kg
Ascent Accessories
Code Description Weight
AGX10025 Ascent Superslim Adaptor 6.2kg
Ascent Superslim Adaptor
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
10
Components
Code Description Weight
SSX10055 Superslim Shaft Latch 51.4kg
SSX10056 Superslim Shaft Pocket 2.73kg
BNX20032 Superslim High Yield Pin M20 x 220 0.6kg
Ascent-Formwork Platform Bracket and Pocket
Code Description Weight
AGX10007 Ascent Bracing Tube 2500mm 9.16kg
Ascent Bracing Tube
Code Description Weight
AGX10044 Ascent Screen Edge 4.06m 9.07kg
AGX10045 Ascent Screen Edge 5.28m 11.8kg
AGX10047 Ascent Screen Edge End Cap Plate 0.06kg
AGX10048 Ascent Screen Edge Clamp 0.500m 0.12kg
AGX10016 Ascent Edge Seal per 25m 15.0kg
Ascent-Screen Edge
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
11
ServicesOur service sets RMD Australia apart...
With over 60 years of experience in the construction industry RMD Australia understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference.
Sales SupportThe Sales Team support you throughout the project, they have the knowledge to advise effective solutions based on RMD's safe and productive products to reduce costs.
Engineered DrawingsEngineering is based in each Region and at RMD's Head Office. They provide detailed drawings that clearly show the most efficient and safest way that the project should be undertaken.
Customer ServiceRMD provide a wide range of customer services to suit your special requirements, from training to the support items that you may require.
Technical ExpertiseEvery project, large or small, requires a unique design. Our highly skilled team of Engineers will firstly gain a thorough understanding of your specific requirements, and then provide a solution designed to more than meet them in terms of speed and accuracy. With a view to cost effectiveness.
SafetyRMD Australia prides itself on the inherent safety of our product range and the solutions that we design. Safety is a major criteria for all of our personnel including our dedicated Sales Team.
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
ContactsRMD AUSTRALIAHEAD OFFICEPO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039Tel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: rmd.australia@rmdformwork.com
ADELAIDEPO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039Tel: +61 (08) 8179 8240Fax: +61 (08) 8179 8241Email: rmd.adelaide@rmdformwork.com
BRISBANE163 Crockford Street, Northgate, QLD 4013 (PO Box 55, Nundah, QLD 4012)Tel: +61 (07) 3634 2700Fax: +61 (07) 3634 2701Email: rmd.brisbane@rmdformwork.com
CAIRNSPO Box 399, 78 - 80 Ishmael Road, Earlville, QLD 4870Tel: +61 (07) 4255 5800Fax: +61 (07) 4255 5810Email: rmd.cairns@rmdformwork.com
DARWIN3/32 Bishop Street, Stuart Park, NT 0820 (PO Box 37639 Winnellie, NT 0821)Tel: +61 (08) 8924 8800Fax: +61 (08) 8924 8810Email: rmd.darwin@rmdformwork.com
HOBART5 Lampton Avenue, Derwent Park, TAS 7009 (PO Box 246, Moonah, TAS 7009)Tel: +61 (03) 6246 7500Fax: +61 (03) 6246 7510Email: rmd.hobart@rmdformwork.com
LAUNCESTON9 Churchill Park Drive, Ivernay, TAS 7248 (PO Box 739, Launceston, TAS 7250)Tel: +61 (03) 6325 2800Fax: +61 (03) 6325 2810Email: rmd.launceston@rmdformwork.com
MELBOURNEPO Box 3224, Unit 5/80 Camp Road, Broadmeadows, VIC 3047Tel: +61 (03) 8301 7200Fax: +61 (03) 8301 7201Email: rmd.melbourne@rmdformwork.com
NEWCASTLE3 Riverside Drive, Mayfield West, NSW 2304 (PO Box 53, Wickham, NSW 2293)Tel: +61 (02) 4041 6700Fax: +61 (02) 4041 6710Email: rmd.newcastle@rmdformwork.com
PERTH6 Energy Street, Malaga, WA 6090 (PO Box 3203, Malaga DC, WA 6945)Tel: +61 (08) 9207 9200Fax: +61 (08) 9207 9201Email: rmd.perth@rmdformwork.com
ROCKHAMPTONCorner McLaughlin and Wade Street, North Rockhampton, QLD 4702 (PO Box 5922, Central Queensland MC, QLD 4701)Tel: +61 (07) 4921 5900Fax: +61 (07) 4921 5910Email: rmd.rockhampton@rmdformwork.com
SYDNEY25-39 Chadderton Street, Canley Vale, NSW 2166 (PO Box 3007, Lansvale, NSW 2166)Tel: +61 (02) 8717 3700Fax: +61 (02) 8717 3701Email: rmd.sydney@rmdformwork.com
TOWNSVILLEPO Box 7788, 11 Whitehouse Street, Garbutt, QLD 4814Tel: +61 (07) 4727 6000Fax: +61 (07) 4727 6010Email: rmd.townsville@rmdformwork.com
Ascent-Formwork Is innovative, craned or self-climbing formwork.PRODUCT BROCHURE
www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.
The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.
An Interserve Company
Recommended