View
215
Download
2
Category
Preview:
DESCRIPTION
Manual de usuario del sistema de control por radiofrecuencia XB OPTION
Citation preview
S O F T B O X E S ㆍ F L A S H E S ㆍ A C C E S S O R I E S
DIGITAL ZIGBEE SYSTEM
www.rimelite.com
CE
registered
Operating Instructions
This manual will show you how to use your Hyundae Photonics Digital Zigbee System XB-T correctly.Please follow the instructions carefully.
CE / CSA / ISO 9001 / ISO 14001 / RoHS
Control and Display
① ②③④ ⑤ ⑥ ⑦
ON
1 2 3 4
ECE
ON
OFF
TEST
Transmitter
① Power On / Off Switch ② Status Indicator ③ Test Button ④ Channel ⑤ Battery Holder ⑥ Hotshoe Connector ⑦ Antenna
Receiver
Operation Instruction
1. Power On / Off Use the on / off switch when new XB-T power turn on / off.Please turn it off after using.
2. STROBE POWER ON/ OFFWhen pushing the TEST button for 3 sec. used strobe will turn on / off.
3. SELECT CHANNELS and SEQUENTIAL FLASHINGSelecting any channel very easy with 4 switches.
4. NOTICE♦ Use 2pcs of AA battery♦ Please replace new batteries when LED light is dim and it doesn't work. ♦ After turn off new XB-T, please change the channel.
Set up one strobe in channel-A and another strobe in channel-B first.And then you make all switches down, the strobes are under the mode of Sequential Flashing.
Channel A Channel B Channel E
Sequential Flashing
Channel C Channel D
ON
OFF
TEST
ON
1 2 3 4
ECE
ON
1 2 3 4
ECEON
1 2 3 4
ECEON
1 2 3 4
ECEON
1 2 3 4
ECEON
1 2 3 4
ECE
CHANNEL SET UP
A s/w1=up, s/w2=down, s/w3=down, s/w4=downs/w1=down, s/w2=up, s/w3=down, s/w4=downs/w1=down, s/w2=down, s/w3=up, s/w4=downs/w1=down, s/w2=down, s/w3=down, s/w4=ups/w1=up, s/w2=up, s/w3=up, s/w4=ups/w1=down, s/w2=down, s/w3=down, s/w4=down
BCDE
Sequential Flashing
Recommended