RGB 160 - LED Neon Flex · Dimensions 11.5 x 29mm / .45 x 1.14in 11.5 × 21mm / .45 × .83in Output...

For more informationplease contacttoll free: 1.888.580.NEON (6366)email: sales@ledneonflex.com

Vivid RGB delivers remarkably fluid color transitions by utilizing advanced DMX and LED dimming technology. Using our exclusive Triple-Extrusion technology, Vivid RGB brings you discernibly richer, truer color. Visibly uniform and flicker free, Vivid RGB transitions like no other – even in high frame-rate environments. Seen by millions at the 2014 Grammy Awards.

Features and Benefits• Seamless source of dot-free illumination• Epistar SMD Light Source• Over 16 Million Color Possibilities • Flat Surface 160° Beam Angle • Bending Diameter of 120 millimeters/ 4.72 inches • Fabricated with Eco-friendly, UV-resistant PVC materials • Three Year Manufacturer’s Warranty

RGB 160

www.ledneonflex.com

Color Lumen/m Power/m Red

Green

Blue

R+G+B(white)

Vivid RGB

Color CCT Wave Length

Red 620 - 630 Nanometer

Green 520 - 530 Nanometer

Blue 465 - 470 Nanometer

Technical Specifications Colors Available

www.ledneonflex.com

*For DMX controller inquiries please check our website or call for customer service.**Photometric Data available upon request or at www.ledneonflex.com

Profiles

Dimensions 11.5 x 29mm / .45 x 1.14in 11.5 × 21mm / .45 × .83in

Output

LED Light SMD, RGB Light Chip

Running Length Single feed: 10 meters / 32.8 feet Double feed: 20 meters / 65.6 feet

Light Surface Rounded profile 270° Square profile 160°

Lumen Maintenance 70,000 Hours L70 @ 25°C : 90,000 L50 @ 25° 50,000 Hours L70 @ 50° : 70,000 Hours L50 @ 50°C

Chromaticity Ordinates x: 0.4715 y: 0.4276 u: 0.2624 v: 0.5354

Color Bin Tolerances +/- 3 %

Efficacy (lm/w) 19.88

CRI 88

Electrical

Input Voltage 24V DC Constant Voltage

Power Consumption 12 watts per meter / 3.66 watts per foot

Power Factor ≤ 1

LED Count 60 LEDs per meter / 18 LEDs per foot

Dimming 110-277v 0- 10v & Magnetic Low Voltage

Physical

Materials Polyvinyl Chloride (PVC)

LED Spacing 16.7 millimeter / .66 inch

Cutting Length 100 millimeters / 3.94 inches - 6 LEDs

Package Size: 340 × 340 ×240 millimeters / 340 × 340 × 120 millimeters / 13.4 × 13.4 × 9.4 inches 13.4 × 13.4 × 4.7 inches

Package Weight: 10.5 kilograms / 23.1 pounds 8 kilograms / 17.6 pounds

Thermal Management Cool to the Touch, Free Air Convection

Fixture Connections Front & End Leader Cables

Bend Tolerances

Maximum Diameter 120 millimeters / 4.7 inches (lateral bending only)

Temperature Ranges

Ambient -30° to 45° Celsius / -22° to 113° Fahrenheit

Operating -25° to 45° Celsius / -13° to 113° Fahrenheit

Humidity 0- 95% Non Condensing

Dependability

Warranty 3 years

Safety

Certification Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.

IP Rated IP68 Factory Order/ IP68 with Accessories

Lumen Count

>201lm

>751lm

>151m

>110lm

3 W

4.5 W

4.5 W

12 W

RGB 160

Mounting

Tolerance of the light is ±0.2mm.

www.ledneonflex.com

RGB 160

3 Year

3Year

Photometric Data

Minimum Bend Diameter

4.7 inch

Candle Power Distribution Illuminance Characteristics

Bottom Exit CableConnects light to power supply with pre-installed bottom cable, IP68.The following cable lengths are available. (For longer lengths please contact us)

Length

0.3m / 0.98’ 1m / 3.2’3m / 9.8’

Side Exit CableConnects light to power supply with pre-installed side cable, IP68.The following cable lengths are available. (For longer lengths please contact us)

Length

0.3m / 0.98’ 1m / 3.2’3m / 9.8’

www.ledneonflex.com

RGB 160

Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only.

End Exit CableConnects light to power supply with pre-installed end cable, IP68.The following cable lengths are available. (For longer lengths please contact us)

Length

0.3m / 0.98’ 1m / 3.2’3m / 9.8’

End Cap

Pre-installed termination protectionof the light, IP68.

Part NumberLN-11X21-FA-EC

Part Number

LN-11X21-RGB-FA-PFB

LN-11X21-RGB-FA-PFB-1m

LN-11X21-RGB-FA-PFB-3m

Part NumberLN-11X21-RGB-FA-PFS

LN-11X21-RGB-FA-PFS-1m

LN-11X21-RGB-FA-PFS-3m

Part NumberLN-11X21-RGB-FA-PFE

LN-11X21-RGB-FA-PFE-1m

LN-11X21-RGB-FA-PFE-3m

Injection-moulded End Fittings

JumperConnects two pieces of light together with a flexible cable. IP68 connector.

Lengths Available

0.3m / 0.98’ 1m / 3.2’3m / 9.84’

www.ledneonflex.com

RGB 160

End FittingsStocked accessories. Standard on non-factory orders.

Power ConnectorConnects light to power lead, IP68.The following cable lengths are available. (For longer lengths please contact us)

Length

0.3m / 0.98’ 1m / 3.2’3m / 9.8’

End CapTermination protection of the light. IP68.

Part Number

LN-11X21-IP68-END

Tail plug * 1Silicone gasket *1Aluminum Billet * 1Crimp Plate * 1

Power T-FeedConnects two pieces of light together with a T joint, powered from the middle. IP68 connector.

Lengths Available (L1 & L2)

0.3m / 0.98’

T joint * 1 (Four-pin)Silicone gasket * 2Aluminum Billet * 2Crimp Plate * 2

Seamless SpliceConnects two pieces of light togetherseamlessly.

Part Number

LN-11-IP40-RGB-SPL

Silicone gasket * 1Joint PCB * 1U steel plate * 2Crimp Plate * 2

Please Note: Indoor only.

Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1

Part NumberLN-11X21-IP68-RGB-300-L / LN-11X21-IP68-RGB-300-R

LN-11X21-IP68-RGB-1M-L / LN-11X21-IP68-RGB-1M-R

LN-11X21-IP68-RGB-3M-L / LN-11X21-IP68-RGB-3M-R

Part NumberLN-11X21-IP68-RGB-T

Double-end connector *1(Four-pin), Silicone gasket * 2, Aluminum Billet * 2, Crimp Plate * 2

Part NumberLN-11X21-IP68-RGB-J30

LN-11X21-IP68-RGB-J1m

LN-11X21-IP68-RGB-J3m

www.ledneonflex.com

RGB 160Mounting ChannelAluminum Mounting Channel

Please Note: Production Order Only. 21 Day Lead Time.

.94

inch

.55 inch

/.13 inch

/.13 inch

.86

inch

.54 inch

Plastic Mounting Channel

50 mm / 2 inch

1000 mm / 39.37 inch

25 mm / .98 inch

100 mm / 3.93 inch

/

200 mm / 7.87 inch

Φ 3.5 mm / .13 inch

Φ 3.5 mm / .13 inch

Basic, 160 & 270 Models

Basic, 160 & 270 Models

Part Number

LN-11-AL-CLIP

LN-11-AL-1M-CHAN

300 mm / 11.81 inch

1000 mm / 39.37 inch

50 mm / 1.96 inch

100 mm / 3.93 inch

200 mm / 7.87 inch

200 mm / 7.87 inch

Φ 3.5 mm / .13 inch

Φ 3.5 mm / .13 inch

Basic, 160 & 270 Models

Basic, 160 & 270 Models

Part Number

LN-11-PL-CLIP

LN-11-PL-1M-CHAN

www.ledneonflex.com

RGB 160Self-locking Aluminum Mounting Channel

Uses: Ceilings and Vertical Installations

CutterMale and Female Connectors

Optional Accessories

*Installation guide available upon request or at www.ledneonflex.com

Please Note: Factory order only.

Part Number Naming Convention

LN-11X21-24-RGB

RGB - Fixture Color

24V - Voltage

11X21 - Profile Size

LN - LED Neon Flex

Φ 3.5 mm / .13 inch

Φ 3.5 mm / .13 inch

50 mm / 1.96 inch

1000 mm / 39.37 inch

25 mm / .98 inch

100 mm / 3.93 inch

/

200 mm / 7.87 inch

/

350 mm / 13.77 inch

25 mm / .98 inch

150 mm / 5.9 inch

Part Number

LN-11-PL-CLIP

LN-11-AL-1M-CHAN-SL

RGB 160

www.ledneonflex.com

Performance

Optical TestingPhotometric test-integrating sphere systemPhotometric test-goniophotometer systemIlluminance efficiency ratioUniformity of lighting surface (led neon flex light)RGB color mixture uniformity (led neon flex light)Lumen maintenance testColor-coordinate shift

Electrical TestingNormal Temperature Test (77°F)Normal Temperature Test(104°F)

Reliability TestingLifetime testElectrical insulation testDielectric voltage withstand testWaterproof testHi-Lo Temperature impactUltraviolet (UV) light exposureSalt spray testAnti-cracking test (-13°F)Connector pull test

Mechanics TestingPull test (Connector, Body)Impact testBending fatigue resistance test

Standard/Reference value/Description

IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)IES LM 79(lumen intensity distribution & Lux diagram)Product specification sheetEvaluate indirect glareEvaluate the uniformity of colorIES LM 80ANSI C78.377

UL1598, IEC60598-1UL1598, IEC60598-1

IS TM 21UI2388, IEC60598-1, >4M ΩUI2388, IEC60598-1, >1.5KVIP68/IP67/IP65-68°F – 140°FASTM G 26. Exposure Method 1IEC68-2-11Assess PVC’s anti-cracking property under low temp. 50N

UI2388IEC 62262, UL2388UL2388, IEC60598-1

Testing Results for LED Neon Flex

RGB 160

www.ledneonflex.com

Charts

RGB 160

www.ledneonflex.com

Wavelength of Color Light

Power Supply Configuration TableThe maximum length of light for different power supply ratings.

Note- 1. “*” Indicates the power supply is over loaded. 10M/32.8Ft must have power cable installed on both ends of the strip. 2. Example: 18W/83% - 18W is the rated power and 83% is the power efficiency.

RGB 160

Warehouse Locations

www.ledneonflex.com

United States6230 W. Desert Inn Rd.Las Vegas, NV 89146T: (702) 749-5316

Canada30 Milner RoadMoncton, NB E1E 2R8T: (702) 749-5319

For more informationplease contacttoll free: 1.888.580.NEON (6366)email: sales@ledneonflex.com

www.glls.com

Project Name:

Notes:

Project Details