View
4
Download
0
Category
Preview:
Citation preview
1
Prep Uncoated Wood or Concrete*
Remove old or peeling coatings with a stain and finish stripper
Clean with wood cleaner such as No. 63 All-In-One Wood Cleaner
Rinse and allow wood to dry completely prior to applying coating
2 3
RESURFACES PROPERLY PREPAREDWEATHERED WOOD AND CONCRETE
®
Smooth FinishTextured or Extra Textured Finish
ALWAYS Prepare Surface Before Coating
Apply ADVANCED DeckOver Coating*
Prefill cracks Apply 1st coat at 75 sq. ft. per gallon Apply 2nd coat at 75 sq. ft. per gallon
4 5 6
*See product label for more details
behr.com
Have a coating or
product question?
Visit behr.com or call
1-800-854-0133 Ext. 2 (U.S.).
©2018 Behr Process Corporation • 1801 St. Andrew Place • Santa Ana, CA 92705 U.S.A. C-DECK-OVER Item No. 50003180
REV. 12/18
U|xaICEHEy00223kzU
Project Checklist1/2" Nap Roller Cover(for Smooth & Textured DECKOVER)
Painter’s Tape
Roller Frame & Extension Pole
Extra Textured Roller Cover(for Extra Textured finish)
Stir Stick & Paint Tray
Protective Equipment (gloves, goggles, etc.)
Plastic Watering Can
Stiff Bristle Brush
Drop Cloth
Nylon/Polyester Brush
Hose or Pressure Washer
Wood or Concrete Cleaners
Concrete Surfaces: Paint Stripper to Remove Failing Coating (if necessary)
Wood Surfaces: Stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper to Remove Failing Coating (if necessary)
Cover Photo Deck (top left) - Dark Walnut PFC-25, Deck (bottom left) - Cape Cod Gray SC-365, Dancing (bottom right) - Redwood SC-330
ADHESION
•
CRACKING
RESISTANCE
NOW
DECKOVER
ADVANCED
Chestnut SC-110
Adobe Brown SC-148
Woodbridge SC-116
Padre Brown SC-105 ♥
Pyramid PFC-19
Valise SC-123
Wood Chip SC-111 ♥
Chocolate SC-129 ♥
Sable SC-135
Dark Walnut PFC-25 ♥
California Rustic SC-130 ♥
Cappuccino SC-142
Russet SC-117 ♥
Redwood SC-330 ♥
Terra Cotta SC-118
Bordeaux SC-106
Barn Red SC-112 ♥
Tile Red PFC-04
Slate SC-102 ♥
Drift Gray SC-137
Harbor Gray SC-143
Silver Gray PFC-68
Pewter SC-131
Atlantic SC-101
Slate Gray PFC-63 ♥
Stonehedge SC-125
Colony Blue SC-119
Flat Top PFC-65 ♥
Mountain Spruce SC-114
Woodland Green SC-126
Sea Foam SC-132
Sandal SC-121
Ponderosa Green SC-120
Forest SC-108
Boot Hill Grey SC-159
Taupe SC-153
Chatham Fog SC-154
Sagebrush Green SC-138
Cordovan Brown SC-104
Antique Brass SC-115
Castle Gray SC-147
Cedar SC-146
Wrangler Brown SC-109
Coffee SC-103
Red Cedar SC-152
Redwood Naturaltone SC-122
Cedar Naturaltone SC-533
Tugboat SC-141
Light Lead SC-149 Cape Cod Gray SC-365 ♥ Sage SC-151 Rose Beige SC-160Golden Beige SC-158Desert Sand SC-145
• Creates a Smooth,
waterproofing finish
• Conceals splinters & cracks up to 1/4"
• Creates a Textured,
waterproofing finish
• For Extra Textured finish, use Extra Textured Roller Cover
♥ Popular Color
Why Choose ADVANCED DeckOver?
ADVANCED DeckOver® Resurfaces Properly Prepared Weathered Wood and Concrete
SMOOTH TEXTURED EXTRA TEXTURED
(Samples Above Shown in Redwood SC-330)
Recommended