Result Test Report

Tags:

Preview:

Click to see full reader

Citation preview

SAFETYPART NAME : BRACE ASSY FR PLR UPR HINGE RH DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 76260-2TPOB MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

32 1 5

4 191 15 18 20 21

6 14

16

2223

b a Welding diameter C = (Cross section) a+b 2POINT : 2 POINT : 3

13

12 11

24 10

9

8

7

CONDITION OF SPOT WELD MACHINE POINT : 1 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME29 AIR PRESSURE5-7 STD RESULT : OK 5.3 6.65

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.70

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.42

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.50

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.47

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.53

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.48

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 6.14

POINT : 9

POINT : 10

POINT : 11

POINT : 12

POINT : 13

POINT : 14

POINT : 15

POINT : 16

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME29 AIR PRESSURE5-7 STD RESULT : OK 4.5 5.92

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.01

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.86

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.12

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.18

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.34

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.58

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.56

CONDITION OF SPOT WELD MACHINE POINT : 17 POINT : 18 POINT : 19 POINT : 20 POINT : 21 POINT : 22 POINT : 23

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME29 AIR PRESSURE5-7 STD RESULT : OK 4.5 5.60

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.24

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.54

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.07

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.28

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.92

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.79

REMARK : SAMPLE DESTRUCTIVE SPOT 23 PCSTOTAL JUMLAH SPOT : 46 PCS

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

SAFETYPART NAME : BRACE ASSY FR PLR HINGE. LH DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 76261-2TPOB MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

3 2

4

1

5

6

7

89

b a (Cross section) a+b 2

10

1

Welding diameter C =

11

13

14

CONDITION OF SPOT WELD MACHINE POINT : 1 POINT : 2 POINT : 3 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME29 AIR PRESSURE5-7 STD RESULT : OK 5.3 5.89

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 5.92

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 5.78

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 5.89

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 5.3 5.91

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.14

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.04

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.26

CONDITION OF SPOT WELD MACHINE POINT : 9 POINT : 10 POINT : 11 POINT : 12 POINT : 13 POINT : 14

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME29 AIR PRESSURE5-7 STD RESULT : OK 4.5 6.22

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.85

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.81

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.02

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.60

Cycle SQUEEZE TIME29 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.55

REMARK :

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

SAFETYPART NAME : REINF ASSY HOODLEDGE RH / CJ4R DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 64180-2TPOA MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

2 1

3

4

b a (Cross section) a+b 2

5 6 7 8

9

10

11

Welding diameter C =

CONDITION OF SPOT WELD MACHINE POINT :1 POINT : 2 POINT : 3 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME26 AIR PRESSURE5-7 STD RESULT : OK 4.5 5.66

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.81

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.07

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.58

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.92

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.16

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.20

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 5.96

CONDITION OF SPOT WELD MACHINE POINT : 9 POINT : 10 POINT : 11

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME26 AIR PRESSURE5-7 STD RESULT : OK 4.5 6.86

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.77

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.74

REMARK :

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

SAFETYPART NAME : REINF ASSY HOODLEDGE LH / CJ4L DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 64181-2TPOA MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

4

3

2 1

b a Welding diameter C = (Cross section) a+b 2

11

10

9

8 7

6

5

CONDITION OF SPOT WELD MACHINE POINT : 1 POINT : 2 POINT : 3 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME26 AIR PRESSURE5-7 STD RESULT : OK 4.5 6.24

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.46

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.26

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.39

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.48

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.33

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.37

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.49

CONDITION OF SPOT WELD MACHINE POINT : 9 POINT : 10 POINT : 11

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9.5 25 20

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME26 AIR PRESSURE5-7 STD RESULT : OK 4.5 6.57

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.47

Cycle SQUEEZE TIME26 Mpa AIR PRESSURE5-7 mm mm : NG STD RESULT : OK 4.5 6.04

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

SAFETYPART NAME : RAIL COMP ROOF SIDE INR RH DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 76304-2TPOB MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

B11 8 91

12

13

14

1

b a (Cross section)

1

23

4 5

6

7

Welding diameter C = a + b 2CONDITION OF SPOT WELD MACHINE POINT : 1 POINT : 2 POINT : 3 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME 29 AIR PRESSURE 5-7 STD RESULT : OK 5.3 5.40

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.17

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.38

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 5.53

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.22

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.11

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.65

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.96

CONDITION OF SPOT WELD MACHINE POINT : 9 POINT : 10 POINT : 11 POINT : 12 POINT : 13 POINT : 14 POINT : 15

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.65 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME 29 AIR PRESSURE 5-7 STD RESULT : OK 4.5 5.75

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.01

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.93

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.82

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.11

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.81

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.3 4.97

REMARK :

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

SAFETYPART NAME : RAIL COMP ROOF SIDE INR LH DRAWING :

DESTRUCTIVE TEST REPORTPART NO : 76305-2TPOB MODEL : X11J CUSTOMER : NMI TEST METHOD : NES-D-0107

B14

11 13 12 1 9 8

1

2 3

b

4 5 6 7

a

(Cross section)

Welding diameter C = a + b 2

CONDITION OF SPOT WELD MACHINE POINT : 1 POINT : 2 POINT : 3 POINT : 4 POINT : 5 POINT : 6 POINT : 7 POINT : 8

THICKNESS CURRENT WELD TIME HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

1.2 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME 29 AIR PRESSURE 5-7 STD RESULT : OK 5.3 6.15

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.30

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.21

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.03

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 5.3 6.16

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.95

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.40

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.88

CONDITION OF SPOT WELD MACHINE POINT : 9 POINT : 10 POINT : 11 POINT : 12 POINT : 13 POINT : 14

THICKNESS CURRENT WELD TIME HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm THICKNESS Amp CURRENT Cycle WELD TIME Cycle HOLD TIME

0.8 9 15 6

mm Amp Cycle Cycle Cycle Mpa mm mm : NG

SQUEEZE TIME 29 AIR PRESSURE 5-7 STD RESULT : OK 4.5 6.02

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.24

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.18

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 5.92

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.40

Cycle SQUEEZE TIME 29 Mpa AIR PRESSURE 5-7 mm mm : NG STD RESULT : OK 4.5 6.38

REMARK :

NCR NO.

RESULT

DATE 10-Nov-2011

REPORTED RISWANTO

CHECKED Mr.DICKY

APPROVED Mr.PAIBOON

-

-

-

: ACCEPTED : REJECTED PD : ______________________

COPY : EN : ______________________

CUSTOMER : ______________________

OTHER : ______________________ F-QAD-017-01

QUALITY ASSURANCE DEPARTMENT

Recommended

Test Report No.: SDHL1607013690FT Date: Nov.24, 2016 ......Test Report No.: SDHL1607013690FT Date: Nov.24, 2016 Page 13 of 67 Result #2 Test 1 Test Conducted: This test is conducted
Documents
ARRL Laboratory Expanded Test-Result Report YAESU … ·  · 2002-06-15ARRL Laboratory Expanded Test-Result Report Model: Yaesu FT-920 Serial: 7F020059 ... the ARRL Laboratory Test
Documents
TEST REPORT...TEST REPORT No . : GZMR140100779 Date : Apr. 03, 2014 Page: 3 of 13 No. Test item Test method Test condition Test result 5 Alkali resistance With reference to ISO 175-2010
Documents
MSP-1000-24 TEST REPORT - meanwell-web.com · model:msp-1000-24 test report 2 / 12 design verify test output function test no test item specification test condition result 1 output
Documents
Test Report - Inkcups Tagless · Test Report Report No. SCL01I118709 Report Issued Date : Page 2 of 14 Jan. 5, 2017 Summary of Test Result(s) Test Item(s) Pre-Treatment Test Method
Documents
Creating Test Reports Test report documents the result of software testing
Documents
EMC TEST REPORT Shenzhen Micsig Instruments Co., Ltd ... · Page 3 of 47 EMC -- TEST REPORT Test Result according to the standards on page 6: Positive The test report merely corresponds
Documents
IP100 Test Report 021118 - IC Plus Test Report_021118.pdf · IC PLUS CORP. ꑅ띺륱ꑬꗷꚳ궭꒽ꕱ-1- IP100 Test Report Dateꅇ2002-Nov-18 Summary Item No. Description Test Result
Documents
ARRL Laboratory Test Result Report - stuff.mit.edu ... · Telephone: 425-454-8155 . ARRL Laboratory Expanded Test-Result Report Model: ... ARRL Laboratory Expanded Test-Result Report
Documents
IC Test Report - TomTom · IC : 5767A-4CR51 IC Test Report Report No. : RX331231 3. Test Result 3.1. Test of AC Conducted Emission Measurement 3.1.1 Limits of AC Conducted Emission
Documents
[Vendor Solution Name] Storage Solution · Appendix C—Database Backup Test Result Report ..... 20 Appendix D—Soft Recovery Test Result Report ..... 21 . Fujitsu PRIMEFLEX for
Documents
TEST REPORT - Modern Power Solutions · PDF fileThe test result in this test report refers exclusively to the presented test sample. This report shall not be ... does not reach excessive
Documents
TEST REPORT · Report Number: 100034923ATL-003 Issued: 04/29/2010 Intertek 2.0 Test Summary 1.0 Introduction and Conclusion Section Test Full Name Test Date Result 4.0 System setup
Documents
FCC DoC TEST REPORT - Logitech · 2018-02-10 · Report No.: FD990811E03 4 Report Format Version 3.0.2 2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks Conducted Test PASS
Documents
Test Report...Test Report Report No. SCL01I118709 Report Issued Date : Page 2 of 14 Jan. 5, 2017 Summary of Test Result(s) Test Item(s) Pre-Treatment Test Method Test Result/ Conclusion
Documents
QA Test Report - Elmarksupport.elmark.com.pl/advantech/download/ipc-610/1-DP3JL.pdf2 IPC-610-H Test Item List Report No.03S005A0 QA Lab Reliability test Num. Test item Result Remark
Documents
FCC Test Report - TomTom · FCC ID : S4L4CR51 FCC Test Report Report No. : FD331231 SUMMARY OF TEST RESULT Report Section FCC Rule IC Rule Description Limit Result Remark 3.1 15.107
Documents
Expanded Test-Result Report - Kenwood TS-2000hamradio.online.ru/ftp2/ts-2000.pdf · ARRL Laboratory Expanded Test-Result Report Model: Kenwood TS-2000 Serial: ... a 100-watt CW/SSB
Documents
TEST REPORT - · PDF fileBelkin Corporation Wireless USB Adaptor Model F5D6050 Test Report Test Report No.: CERASH03041703 EN 60 950 Clause Requirement - Test Result -remark Verdict
Documents
HDMI Test Report - Diodes Incorporated...HDMI Test Report Overall Result: PASS Test Configuration Details Device Description Device ID Transmitter Fixture Type Other Probe Connection
Documents