Research Advances Towards Low Cost, High Efficiency PEM Electrolysis Dr. Katherine Ayers Presented...

Research Advances Towards Low Cost, High Efficiency PEM Electrolysis

Dr. Katherine Ayers

Presented by: Larry Moulthrop

NHA 2010, Long Beach, CA

RPTXXXX

Outline

• Proton Capabilities– Strong product history– Advanced technology and reliability

• Near Term Strategy– System development– Materials research

• Recent Advances and Future Directions

2

RPTXXXX

Capabilities

• Complete product manufacturing & testing

• Containerization and hydrogen storage solutions

• Turnkey product installation for industrial and energy applications

• World-wide sales and service

3

Power PlantsLaboratories SemiconductorsHeat Treating

RPTXXXX

• New laboratory line also launched at Pittcon 2010• Over 1200 commercial units currently fielded

S Series H Series StableFlow®

HOGEN® Hydrogen Generators Hydrogen Control Systems

Commercial Industrial Products

4

RPTXXXX

Specialty Products

FuelGen line HP products (2400 psi electrolysis)

Indoor and outdoor versions

5

RPTXXXX

Proven Cell Stack Reliability

Projected Cell Stack Life

1.4

1.8

2.2

2.6

3.0

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000

Operating Time (Hours)

Average Cell Potential

(Volts, 50oC)

10 µV/cell hr Decay Rate30 µV/cell hr Decay Rate

3-Yr Life (27,000 hr) 5-Yr Life (45,000 hr)

15 µV/cell hr Decay Rate

4 µV/cell hr Decay Rate

Cell Stack End of Life Voltage

25-cell stacks1200 ASF (1.3 A/cm2)200 psi H2 / 10 psi O2

6

RPTXXXX

Product Strategy• Leverage strong history and technology base to

provide reliable customer solutions • Address real world technology problems for

commercial and military applications – Increased H2 generation capacity for fueling and

industrial applications– Materials research towards lower cost, higher

efficiency electrolyzers– High pressure, integrated solutions for small fueling

applications

• Balance business goals with stewardship of environmental and educational responsibility

7

RPTXXXX

$5/kg H2 pathway: Electrolysis scale upHamilton

Sundstrand

TARDEC Phase 2

TARDEC Phase 1

Missile Defense Agency

0.23 ft2 Stack Development

CostReduction of 0.23 ft2

Stack

65 kg/day System

Development

ProtonInternal

R&D funding(+$2 Million)

0.6 ft2 Cell Design & Validation

150 kg/day System

Development

Scale-up0.6 ft2 High Efficiency

Stack

DOETrade Study

DOEUNLV

Subcontract

DOEBipolar Plate

Program

Cost Reduction & Efficiency

Improvements

500 kg/day System

Development

8

Volumes and stack advancements lead to further cost reductions

RPTXXXX 9

HOGEN® C Series• Maximum Capacity: 30 Nm3/hr H2

• Prototypes operational with full commercial availability in Q1 2011.• 5 times the hydrogen output of the H-Series yet only 1.5x the foot print.• Uses stack platform developed for Navy with Hamilton Sundstrand.• Also allows entry in to higher capacity heat treating, food processing and

glass manufacturing.

RPTXXXX

0.6 ft2 Stack Development• Bipolar plate design• Demonstrated 200 and 425 psi operation

– Single and multi cell stacks tested

1.751.801.851.901.952.002.052.102.152.202.252.30

0 1000 2000 3000 4000

Ce

ll P

ote

nti

al

(V)

Run Time (hours)

0.6 SQFT 3 Cell (1032 amps, 425 psi, 50oC)

Cell 1 Cell 2 Cell 3

10

RPTXXXX

$-

$2

$4

$6

$8

$10

FuelGen65, current stack

150 kg/day system, next

generation stack

150 kg/day system,

advanced stack*

$/kg

H2,

H2A

mod

el

*Assumes volumes of 500 units/year

Hydrogen Cost Progression

, product

introduction

11

RPTXXXX 12

Materials Technology Roadmap

Membrane

6-12 months 1-2 years 2-3 years 3-5 years

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Original <12 months 1-3 years >3 years

Cel

l co

st

Implementation timing

Cell materialsFrames and gasketsSeparatorsO2 flow fieldsH2 flow fieldsAnode catalystCathode catalystMembrane

Catalyst

Flow fields

PFSA materials, reduced thickness

Process improvements/reduced loading

Higher activity catalysts

Next generation materials

Other parallel activities:Increased operating temperature/pressureLarger active area designsAutomation/high speed processing

New membrane chemistries, further thickness reduction

Alternate deposition techniques and engineered nanostructures

Supplier qualification, near term cost reductions

Bipolar plate, next generation design

Integrated frame/flow field, part count reduction

Alternate materials/ precious metal reduction

Unitized parts

• Overall Strategy: maintain projects in varying stages of development

0%

20%

40%

60%

80%

100%

Current <1 year 1-3 years >3 years

% B

asel

ine

cost

Implementation Timeline

MEABalance of cellBalance of stack

RPTXXXX 13

Collaboration Strategy• Develop and strengthen relationships with key materials

companies, universities, and national labs– Leverage proposal collaborations and access to new materials

RPTXXXX

Cell Polarization Model

• Largest opportunities for efficiency improvements are in membrane and anode catalyst development

0%

10%

20%

30%

40%

50%

60%

0 500 1000 1500 2000 2500

% O

verp

ote

nti

al

Current Density, mA/cm2

Activation and Ohmic Overpotentials

Cathode Activation

Anode Activation

Ionic

Electronic

14

RPTXXXX 15

Catalyst Research• Reduce overpotential through

improved oxygen evolution catalysts– Improve utilization: higher surface area– Optimize composition: mixed metal oxides

0.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

9.00

10.00

Baseline,nominal

T1, atm 1 T1, atm 1,treated

T1, atm 2,treated

T2, atm 1 T2, atm 1,treated

T2, atm 1,treated

T2, atm 2 T2, atm 2,treated

T3, atm 2

Catalyst

No

rmal

ized

Su

rfac

e A

rea

vs. B

asel

ine Surface area vs.

synthesis and post treatment conditions

Baseline

Design-Expert® Software

Cell potential - 1 A/cm2Design Points1.92

1.57

X1 = A: IrX2 = B: RuX3 = C: Ta

A: Ir1.000

B: Ru1.000

C: Ta1.000

0.000 0.000

0.000

Cell potential - 1 A/cm2

1.57

1.57

1.60

1.65

1.65

1.70

1.80

1.902.00

Contour plot: oxide composition vs. voltage

3M nanostructured

thin film electrode

RPTXXXX

Catalyst Process Optimization• Achieved 55% reduction in anode loading, 66% reduction in

cathode loading with no performance loss

1.00

1.20

1.40

1.60

1.80

2.00

2.20

0 100 200 300 400 500

Ce

ll P

ote

nti

al

(V)

Run Time (hours)

Catalyst Loading Test: 160 Amps, 80oC

Baseline

20% loading reduction

55% loading reduction

16

RPTXXXX

Impact on MEA Costs

Relative Cost

17

RPTXXXX 18

Membrane Research Directions

Membrane support structure

Reinforced membranes: e.g. WL Gore, Dupont

Hydrocarbon membranes (e.g. Hickner, Penn State)

Proton Focus:

Alternate approach

0.00

0.20

0.40

0.60

0.80

1.00

1.20

0 50 100 150 200 250 300

Membrane thickness (microns)

No

rmal

ized

res

ista

nce

Standard PFSA MEAs, commercial supplier

Reinforced membrane MEAs

No impact of reinforcement material on membrane conductivity

RPTXXXX 19

Durability vs. Thickness

RPTXXXX 20

Efficiency Improvements

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.1

2.2

0 500 1000 1500 2000 2500 3000

Pote

ntial

(Vol

ts)

Current Density (mA/cm2)

Demonstrated >5000 hours

Next Generation Materials - projected

RPTXXXX

Flow Field Improvements

• Prototype flowfields fabricated using production tooling and techniques

• Reduction in part count• Improvement in cell robustness

Separator

H2 Frame

H2 Flowfield

O2 Frame

SeparatorO2 FlowfieldO2

Frame

H2 Frame

MEA

H2O H2OO2

H2

H2O

21

RPTXXXX

Next Generation Materials

• Approach: reduced cost base material with protective coating

• Test wafers imbedded within modified cell parts

• Preliminary results:– Slight corrosion observed at

defect sites– Stable operational

performance

300 µm

22

RPTXXXX

In-Cell Performance: Potential Stress Testing

23

• Maintained stable performance above 2 Volts for 500 hr testT

emp

eratu

re (°F)

RPTXXXX

Cell Cost Reductions

Relative Cost

24

RPTXXXX

Conclusions

• Proton is leveraging robust product development history in advanced designs– Enables rapid time to market and reliability on product

launch

• Strong materials competencies and collaborations are being applied towards cost reductions and efficiency improvements

• Pathways have been defined for meeting DOE fueling targets and customer requirements

25

RPTXXXX

Funding Sources

26