View
230
Download
3
Category
Preview:
Citation preview
OEM names and part numbers are used to identify part numbers. Our products are not affiliated with, sponsored or approved by the original equipment manufacturer.
Replacement spare parts for
FETTE tablet compression equipment
INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE
ELON, NC 27244
TEL 001 336 584 4777
FAX 001 336 584 9540
410 NORTH 1650 WEST SPRINGVILLE, UT 84663
TEL 001 801 491 7022
FAX 001 801 491 7014
www.iimnc.com
rev 120816
456 MANNING AVENUE ELON, NC 27244 USA
TEL 001 336 584 4777 FAX 001 336 584 4950
Fette Spare Parts Catalog
Table of Contents
Section 1 Pages 3-4 Lubrication felts
Section 2 Page 5 Seals
Section 3 Pages 6-10 Cams, rails etc.
Section 4 Pages 11-16 Feed frames & related components
Section 5 Pages 17-18 Dust cups
Notice to copyright: this publication, including all portions hereof, is copyrighted by IIM and is protected by the copyright laws of the United States and other respecting Proprietary rights. No part of this publication, including any portion herein, may be reproduced, transmitted, or redistributed in any form, or by any means, electronic or mechanical or otherwise, including photocopying, recording, or use in any information storage and retrieval system, without written permission from IIM. Such unauthorized reproduction, transfer, and/or use may be a violation of criminal and civil law.
Section 1: lubrication felts
Picture IIM p/n Description Model
14996 Felt, Lube, 1.25” x 3” 3200
3090
15451 Felt, Lube, 1.375” x 2.75” 3200
3090
25050 Felt, Lube, for holder 3109768 3200
3090
24496 Felt, Lube, B-Size 3200
3090
15452 Felt, Lube, B-Size 3200
3090
14997 Felt, Lube, B-Size 3200
3090
Page 3www.iimnc.com (336) 584-4777 x 2229 Page 3
Picture IIM p/n Description Model
25051 Felt, Lube, B-Size, for holder 3109768 3200
3090
24470 Felt, Lube, D-Size 3200
3090
24497 Felt, Lube, D-Size 3200
3090
Page 4www.iimnc.com (336) 584-4777 x 2229 Page 4
Section 2: seals
Picture IIM p/n Description Model
403 Seal, punch, B-size,upgraded 3200 3100 3090 3000 2200 2090
24586 Seal, punch, D-size, metal rim 3200 3100 3090 3000 2090
25952 Seal, punch, D-size, metal rim, slightly smaller OD and lower profile for newer turrets
3200 3100 3090 3000 2090
23203 Seal, punch, D-size, old style 3200 3100 3090 3000 2090
10247 Tool, seal installation and removal, B & D size tooling
3200 3090 2200 2090
Page 5www.iimnc.com (336) 584-4777 x 2229 Page 5
Section 3: cams
Picture IIM p/n Description Model
20958 Rail, Hold Down 3200
3090
17857 Plate, Wear 3200
3090
24660
17837
Rail, catch, IPT 1 (D size)
Rail, catch, IPT19 (B size)
3200
3090
24209 Rail, catch, IPT19 (B size) 2200
2090
24577 Ledge, Pulldown, IPT-1, D-size 3200
3090
16950 Cam, lowering bar, B-size 3200 3090
23584 Cam, lowering bar, B-size 2200 2090
Page 6www.iimnc.com (336) 584-4777 x 2229 Page 6
Picture IIM p/n Description Model
24657 Cam, Shank Lube, Inside, IPT 1 3200
3090
24658 Insert cam, B-size 3200 3090
25735 Insert cam, D-size 3200 3090
26361 Ledge, holding, upper, D-size 2200 2090
17846
25736
Ledge, Plastic, IPT-19 (B-size)
Ledge, Plastic, IPT-1 (D-size)
3200
3090
24576 Ledge, compression, B-size 3200 3090
24574 Ledge, compression, D-size 3200 3090
Page 7www.iimnc.com (336) 584-4777 x 2229 Page 7
Picture IIM p/n Description Model
24194
24273
Ledge, pre-pressure, plastic
Ledge, pre-pressure, plastic, older version
3200 3090
26395
Cam, Flight, Plastic 2200 2090
15062
15063
Cam, Flight, bronze
Cam, Flight, plastic
2200 2090
24661 Plate, Cover, small B-size 3200 3090
24659 Plate, Cover, Large D-size 3200 3090
24573 Punch Head Lube Cam, D-size 3200 3090
Page 8www.iimnc.com (336) 584-4777 x 2229 Page 8
Picture IIM p/n Description Model
26215
25612
Punch Head Lube Cam, B-size, Bronze
Punch Head Lube Cam, B-size, Plastic
3090
25308
25412
Tight punch control/ejection cam assembly with removable insert
Customer base provided: modified, insert/hardware added
3200 3090 2200 2090
25309 Insert for tight punch control/ejection cam assembly
Used in assembly #25308
3200 3090 2200 2090
943 Tight punch control/ejection cam, original one-piece version
See #25308 for upgrade
3200 3090 2200 2090
20956 Cam, Transition 3090
24536 Load cell ramp, original one-piece version
See #25432 for upgrade
3200 3090
Page 9www.iimnc.com (336) 584-4777 x 2229 Page 9
Picture IIM p/n Description Model
25432
25434
Load cell ramp assembly, with removable insert
Customer base provided: modified, insert/hardware added
3200 3090
15471 Insert, removable, for upgraded load cell ramp assembly
3200 3090
Page 10www.iimnc.com (336) 584-4777 x 2229 Page 10
Section 4: feed frames and related components
Picture IIM p/n Description Model
316 Base, feed frame, aluminum 3200 3090
26506
26424
Base, feed frame, UHMW
Base, feed frame, Delrin
3200 3090
16092 Base, feed frame, aluminum 2200 2090
25061
25062
Base, feed frame, bi-layer
Insert, feed frame, bi-layer
3090
25427
25428
Base, feed frame, bi-layer
Insert kit, 3 piece, feed frame
3090 3200
317 Base, feed frame, aluminum 3000
www.iimnc.com (336) 584-4777 x 2229 Page 11
Picture IIM p/n Description Model
27863
25874
Insert, wear strip, delrin
Insert, wear strip, feed frame, for use with feed frame FA39033
3090
25874 Insert, wear strip, 26mm 3090
27256 Insert, wear strip, 11mm 2090
27257 Insert, wear strip, 16mm 2090
132 Strip, F.O.M seal, 5 x 9 x 610
5077
5805
Drive shaft, Fill-O-Matic, plastic
O-ring
3090
25481 Paddle wheel 2090 3090
www.iimnc.com (336) 584-4777 x 2229 Page 12
Picture IIM p/n Description Model
24499 Sleeve, paddle wheel 2090 3090
24471 Screw, shroud fastener 3200 3090
350 Screw, die lock 2090 3090
25508 Pre-compression roller 3000
7668
24972
Compression roller with bearing
Compression roller only without bearing
3200 3090
24633 Bearing, compression roller 3200 3090
12981 Punch retaining strip 3200 3090
www.iimnc.com (336) 584-4777 x 2229 Page 13
Picture IIM p/n Description Model
17858 Gate, fast 3200 3090
24686 Cover, re-circulation scoop 3200 3090
17889 Cover, scraper 3200 3090
24197 Scoop, re-circulation 3200 3090
976
26417
Scraper, bronze
Scraper, titanium
3200 3090
21592 Scraper, plastic 3200 3090
5078
27392
Scraper, bronze
Scraper, plastic
2090 2200
www.iimnc.com (336) 584-4777 x 2229 Page 14
Picture IIM p/n Description Model
25409 Scraper, plastic 2090 2200
25410
26418
Scraper, bronze
Scraper, titanium
3000 3100
24923 Take off arm, with air assist 3200 3090
25035 Take off arm, without air assist 3200 3090
25411 Take-off arm, with air assist 3090
25087 Take off arm, without air assist, stainless steel
3200 3090
28171 Take-off arm, with air assist, plastic 3090
www.iimnc.com (336) 584-4777 x 2229 Page 15
Picture IIM p/n Description Model
31128 Take-off arm, with air assist, stainless steel 3090
365 Tail over die, upgraded 3200 3090
13368 Tail Over Die 3000 3100
25413 Tail Over Die 2200
www.iimnc.com (336) 584-4777 x 2229 Page 16
Section 5: dust cups
Picture IIM p/n Description
6087
BB2, 29mm, #1, food grade blue
6088
D3, 35mm, #2, food grade blue
6089
D3, 41mm, #3, food grade blue
25344
25mm, clear, blank, replaces Natoli #1
www.iimnc.com (336) 584-4777 x 2229 Page 17
Recommended