Relay Switch 2x1,5kW association - fibaro · with Fibaro System How to: make device association...

H o m e i n t e l l i g e n c e

Relay Switch 2x1,5kW association with Fibaro System

How to: make device association with Fibaro System.

Example scene: there are 3 lamps in a living room, each with separate switch.

Target: associate 3 lamps so that switching one lamp ON or OFF switches all of them at

same time.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Click settings icon in lamp which switch key other 2 lamps are to be associated with.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

After completing previous step, Click "Advanced" settings tab

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Now click "Set up" button corresponding to chosen association group. Fibaro Relay Switch 2x1,5kW sup-ports two, independent association groups: ID1 and ID2, triggered by key 1 or key 2 of the switch, respec-tively.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Tick devices to be associated.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Click disk icon to save association.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Now Home Center pro-cesses saved data and sends commands to all associated devices. After approx. 1 second, associa-tion is ready.