REDROCK MICRO 1 Title: ultra Event for Canon EOS C300/C500...

12" CarbonFiber Rod

ultraCage

9" CarbonFiber Rod

microBrace

microBraceRetainer KnobmicroMount

Hand GripsmicroFollowFocus | blue

powerPack

Top Handleand Thumbscrew

2x 6” CarbonFiber Rods

DoubleTap

http://start.redrockmicro.comTutorials, forums, customer support

ultra Event BASIC Bundle Components

ultra Event for Canon EOS C300/C500 SETUP GUIDEREDROCK MICRO

Title: Scene:

Company: Pages: of

Date:

1

04.01.12

1

create the cinema experience

ultra Event Additional Options

D

AC

B

E

F

G

HE: Attach Top Handle. See above note.F: Insert 6” Carbon Fiber Rods into ultraCage.G: Attach microFollowFocus | blue to rig and microLens Gear to camera lens.H: Screw powerPack into place on cage.

ultra Event BASIC and DELUXE Bundles

ADDITIONAL OPTIONS

COMPLETE BASIC ultra Event ASSEMBLY Note: when using Top Handle, Triangle knob screw replaces 1/4-20 x 3/8” screw at top of cage into camera.

A: Attach microBrace to microMount by tightening Retainer knob. B: Insert 12” and 9” Carbon Fiber Rods into ultraCage as shown.

C: Tighten microMount with microBrace onto 12” Rod.D: Add Blue Handgrips to both rods in front.