Rebrasti limovi Ribbed metall sheets POSEBNE DORADE; SPECIAL … · 2014-09-13 · | 21 Rebrasti...

| 21

LIM

OVI

POSE

BNE

DO

RAD

E; S

PECI

AL A

DD

ITIO

NAL

PRO

CESS

INGRebrasti limovi Ribbed metall sheets

Artikl; Item: LMDDorada; Additional processing: BADEMASTI UZORAK; ALMOND SAMPLE

Artikl; Item: LMDDorada; Additional processing: ALUMINIJ BADEMASTI UZORAK; ALUMI-NIUM ALMOND SAMPLE

Artikl; Item: LMDSSDorada; Additional processing: SATINIRANE S OTISNUTIM BADEMASTIM UZORKOM; SCOTCH BRITE WITH IMPRESSED ALMOND SAMPLE

Artikl; Item: LMDSDorada; Additional processing: S OTISNUTIM BADEMASTIM UZORKOM; WITH IMPRESSED ALMOND SAMPLE

Artikl; Item: LMBBDorada; Additional processing: S ŠTAPIĆASTIM ISPUPČENIM UZORKOM; WITH CONVEX ASHLAR SAMPLE-STICKS

Artikl; Item: LMBDorada; Additional processing: ROMBOIDNE S ISPUPČENIM UZORKOM ; RHOMBOID WITH CONVEX ASHLAR SAMPLE

Rebrasti limovi bademastog uzorka proizvod su procesa ekstrudiranja u željezarama, mogu biti od inox čelika i od aluminija; upotrebljavaju se za stubišta i skele. Razlikuju se od rebrastih limova s ispupčenim uzorkom jer su ispod potpuno glatki i bez otisaka. Formati: širine 1000/1250/1500; dužine 2000/3000/4000. Rebrasti limovi s ispupčenim uzorkom (Bugnata) proizvode se štancanjem običnih limova. Može ih se upotrijebiti za izgradnju stazica, stepenica, podova, u brodograđevnoj, željezničkoj, automobilskoj indu-striji, u raznim stolarskim i mehaničkim konstrukcijama itd. Standardni format je 1000x2000 mm (drugi formati na upit).

Ribbed metal sheets with almond sample are products of extruding proces-ses in the metalwork’s; they can be made of stainless (inox) steel and aluminum; they are used for staircases and scaffoldings. They differ from the ribbed metal sheet with convex ashlar sample since they are absolutely smooth and without prints underneath. Formats: 1000/1250/1500 width; 2000/3000/4000 length. Ribbed metal sheets with convex ashlar sample are produced by punching ordinary sheet metal. They can be used for manufacturing paths, stairs, floors, in shipbuilding, railway and car industries, in various joinery and mechanical struc-tures, etc. Their standard format is 1000x2000 mm (other formats upon request).