View
215
Download
0
Category
Preview:
Citation preview
TECHNICAL SPECIFICATIONSEngine 2-Stroke
Displacement 30.1 cc
Max. output 1.1 kW / 9500 rpm
Sound Pressure 98 dB (A)
Dry weight 3.3 kg
Dimension (LxWxH, mm) 421 x 244 x 230
Guide bar 6-tooth sprocket nose bar
Guide bar length mm(inch) 300 (12)
Chain type 91 VG
Fuel tank capacity (L) 0.24
Chain oil tank capacity (L) 0.18
MAR-MCV3100SMarch 2018
Rear Handle Chainsaw
Special Price: Please
contact us
Retail / Nett Price:
R4,400EXCL. VAT
Please note this price is only valid from Head Office,
contact Branches for price with courier cost in your area.
PROFESSIONAL GRADE
NOTE: Specifications may vary according to the types, and are subject to change without notice.
HEAD OFFICE: NIGEL, GAUTENG1 Third Avenue, Vorsterskroon
Tel: 011 730 3400 / Fax: 011 814 2345Email: info@turfmaster.co.za
Website: www.turfmaster.co.za
BellvilleCnr Cilmor & Labelle Rd,Stikland, Bellville
Tel: (021) 945-4106/7/8Fax: (021) 946-2371
DurbanCnr Bevis & Bishop RdNo.11 Old Main Road, PinetownTel: (031) 701 8233Fax: (031) 701 3097
Port Elizabeth20 – 6th Ave., Walmer, Port ElizabethTel: (041) 581-8443/4/5Fax: (041) 581-8446
PretoriaUnit 9 Miracle Park, Lenchen Ave Ext off Old JHB Road, CenturionTel: (012) 653-8342/8Fax: (012) 653-8343
BRANCHES:
NelspruitCnr Friedenheim& Fuchsia Rd,NelspruitTel: (013) 492 0490
BRANCHES:
Maruyama pays attention of all the details of quality and performance while always working to achieve the lightest possible weight.– Our Neodymium magnet rotor is an excellent example or our engineers selecting materials that not only save weight but contribute to added quality and performance.– Neodymium not only saves on weight, but the high magnesium content also makes for easier engine starting.
An additional, comfortable braking system. The saw chain is stopped in the event of powerful kick-back and also by theinertial load.
Our Intake-only clean air system separates dust and debris using centrifugal force that diverts
dirty air away from the air filter so that the saw intakes only clean air.
The original “Pre VENT” system not only keeps the internal workings of the saw cleaner, it
reduces the frequency of air filter maintenance.
Loose ChainNo Problem!!
Just Pull theE Just Systemto make the chain tight.
⑦⑧
⑨
⑥
Automatic return choke
Throttle lever
Big chain brake handle for the safety
*also ” E JUST ”
handle.
①
②
③
④ ⑤
Easy maintenance for air cleaner without tool.
Less vibration and ergonomic handle
Priming pump for good starting
performance
Starter handle “MARUYAMA
Reverse Start 2”
Stop switch
Super easy starting system.
“Reverse Start 2 “ system incorporates the best features of an
electric starter for fast and easy starts without the drawbacks of added weight,
expense, or complicated components.
• Our auto-advance magnet makes for easy pulling and smooth starts.
• Our chainsaws use Digital CDI(Capacitor Discharge Ignition) Also plug wire is replaceable.
BOOT-MOUNTED CARBURETORWalbro carburetor sits on a rubber boot
Reduces temperature at the carburetor
Less chance of vapor lock
Reduces vibration at the carburetor
Longer life of internal carburetor components
Oil adjustment screw is accessed from the top for ultimate
convenience to the end user.
Our patented
“E JUST”
chain tensioning system uses a ratchet
mechanism on the front handle for quick
chain tightening.
A Maruyama exclusive!
MUFFLER
Light weight & Non-catalyst Our muffler design is not only extremely effective in noise-reduction qualities, but it is
also simple to disassemble for maintenance.
• Our large,25mm diameter oil and fuel filler openings feature captivated caps to avoid misplacing the filler caps.
• Our oversized cleaner cover constructed with generous thickness and it located for maximum resistance to external damage.
HYBRID ANTI-VIBRATION SYSTEM
Spring
Damper
Rubber
Damper
Our saws feature a lightweight, durable three shoe centrifugal clutch.
- All metal
- 3 extension spring
- 13mm hex for easy removal
Positive engagement means highly efficient power transfer from engine to
cutting attachment.
NOTE: Specifications may vary according to the types, and are subject to change without notice.
HEAD OFFICE: NIGEL, GAUTENG1 Third Avenue, Vorsterskroon
Tel: 011 730 3400 / Fax: 011 814 2345Email: info@turfmaster.co.za
Website: www.turfmaster.co.za
BellvilleCnr Cilmor & Labelle Rd,Stikland, Bellville
Tel: (021) 945-4106/7/8Fax: (021) 946-2371
DurbanCnr Bevis & Bishop RdNo.11 Old Main Road, PinetownTel: (031) 701 8233Fax: (031) 701 3097
Port Elizabeth20 – 6th Ave., Walmer, Port ElizabethTel: (041) 581-8443/4/5Fax: (041) 581-8446
PretoriaUnit 9 Miracle Park, Lenchen Ave Ext off Old JHB Road, CenturionTel: (012) 653-8342/8Fax: (012) 653-8343
BRANCHES:
NelspruitCnr Friedenheim& Fuchsia Rd,NelspruitTel: (013) 492 0490
Recommended