View
240
Download
5
Category
Preview:
Citation preview
CPU SpecificationsImage AcquisitionWorkstation (2D/3D)• 2 Ghz or more Duo Core Processor• 60 GB or better HD Free Space• 3 GB or more RAM•WINDOWS 7,WINDOWS XP, or VistaBusiness / Ultimate (32 bit OS only)
• Monitor 1600 x 1200 res. min.• 32 bit graphic card, 256MB• 2-1 GBit Net Interface Cards (NICs)• High-speed Internet, DSL or better• 8 x DVD/RW
Acquisition Workstation• Romexis Software acquires the imagefrom the Reconstruction PC
• After the case images are reviewed inRomexis, they can be transferred to3rd party imaging software
• Romexis Software is alsoused to enhance, filter, measure,diagnose, archive and export theimages (2D / 3D)
CPU Specifications forAdditional WorkstationsFor 3D/2D images.(refer to Image Acquisition Workstation (2D/3D))
Local Area ConnectionRequired for sharing printer or addingadditional workstations.
Optional PrinterStandard 10/100/1000 Switch(Provided by PLANMECA)
NOTE: A PLANMECAPower Conditioner isrecommended for theX-ray and Reco.
alternate connection for 2nd NICNIC
NIC
Network ServerSpecifications• 2 Ghz or more Duo Core Processor• 2 Hard Drives, 500 GB each min.• 3 GB or more RAM•WINDOWS XP / Server 2003 OS(32 bit OS-Only)NET 2.0 and IIS must be installed
• Ethernet 1 GB• 8 x DVD/RW
Network Server• Stores and archives all data toMS SQL Express• Romexis stores data to XML• The data server should have large harddrive disk space, hardware redundancyand logical backup system• Each“Standard”or “High Resolution”3D data set is approx. 250 MB• Each“Low Dose”3D Large Volume data isapprox. 30 MB
Dedicated Reconstruction PC(Provided by PLANMECA)
The reconstruction processingcombines X-ray slices (raw datataken during the patient scan)through digital geometryconversion to produce voxels.This data is transferred toRomexis Software on ImageAcquisitionWorkstation andarchived on server.
PLANMECAProMax 3D / 3Ds
PLANMECAProMax 3D / 3Dsw / Cephalostat
Width 113 cm(44.5 in.)
198 cm(78 in.)
Depth 126 cm(49.5 in.)
76 cm(30 in)
Height* 154 - 243 cm(60.5 - 95.75 in.)
130 - 220 cm(51.25 - 86.5 in.)
Width 150 cm(59 in.)
216 cm(85 in.)
Depth 163 cm(64 in.)
163 cm(64 in.)
Height* 244 cm(96 in.)
244 cm(96 in.)
Weight 113 kg(248 lbs)
128 kg(282 lbs)
PhysicalSpace
Requirements
Minimum
Operational
Space
Requirements
*Themaximum
heightoftheunitcanbeadjusted
forofficeswithlimitedceilingclearance
PLANMECA Romexis Software
19 PLANMECAProMax 3D 20PLANMECA
ProMax 3D
The disk space requirements are determined by digital
images. Thus, the space requirements vary, but a rough
estimate is as follows: 1 MB per intraoral image, 7–9 MB per
extraoral image, depending on a variety of image specific
factors, and up to 250 MB per 3D image.
It is NOT recommended to use the same computer for your
application server as your database server. If PLANMECA
Romexis server computer is also used for client activities, the
hardware should meet both client and server specifications.
ProMax 3D digital X-rayimaging hardware diagrams and system requirements
Dimensionsand space requirements
21 PLANMECAProMax 3D 22PLANMECA
ProMax 3D
42.5”108 cm
37”94 cm
60.5” - 95.75”154 cm - 243 cm
51.25” - 86.5”130 cm - 220 cm
Recommended