project portfolio - KAIA

PROJECT HANDLED UNDER UAAC UNITED ARAB ALUMINUM COMPANY (OCTOBER 2011-CURRENT)

THE LOT AREA OF 670,000 m2 MULTI BILLION RIYALS

PROJECT IS DESIGNED TO MAKE KAIA THE LARGEST

HUB IN THE WORLD

KAIA INTERNATIONAL AIRPORT King Abdul-Aziz International Airport Development Project

THE LOT AREA OF 670,000 m2 MULTI BILLION DOLLAR

PROJECT IS DESIGNED TO MAKE KAIA THE LARGEST

HUB IN THE WORLD

FIRST ASSIGNMENT Oct. 25 2011 I took Performance test to release fabrication drawing for cladding works as per site dimension for Saudi Private Airport Building

DATA CENTER 1

December 2011 First major project handled as Facade designer

ANTICIPATING PHASE 1 FROM KAIA PROJECTION OF

30 MILLION ANNUAL CAPACITY, WE HAVE THE

OPPORTUNITY TO SUCCESFULLY PROVIDE THE

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 8,000 m2 OF ALUMINUM REQUIREMENTS FOR

THIS BUILDING

FLOOR AREA: 15,800m2

DATA CENTER 2

August 2012 Building assignment as Team leader

TYPICAL BUILDING WITH DATA CENTER 1 WE WERE

ALSO GRANTED TO PROVIDE THE DESIGN,

FABRICATION AND INSTALLATION OF MORE THAN

8,000 m2 OF ALUMINUM REQUIREMENTS FOR THIS

BUILDING (TYPICAL TO DATA CENTER 1)

FLOOR AREA: 15,800m2

METEOROLOGICAL OBSERVATION BUILDING

September 2014 Building Assignment as Team Leader

STATE OF THE ART WEATHER STATION OF KAIA, WE

HAVE THE OPPORTUNITY TO DESIGN, FABRICATE AND

INSTALL MORE THAN 800 m2 OF ALUMINUM

REQUIREMENTS FOR THIS BUILDING

FLOOR AREA: 470m2

CRISIS MANAGEMENT CENTER

January 2014 Building Assignment as Team Leader

WE ALSO HAVE SUCCESSFULLY PROVIDED THE

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 1000 m2 OF ALUMINUM REQUIREMENTS FOR

THIS BUILDING

FLOOR AREA: 1200m2

FUEL FARM

November 2014 Building Assignment Team Leader

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 2000 m2 OF ALUMINUM REQUIREMENTS FOR

KAIA’S OIL DEPOT WAS SUCCESSFULLY PROVIDED BY

UAAC

FLOOR AREA: 1900m2

J250 TREE NURSERY FACILITY BUILDINGS

October 2015 Building Assignment as Team Leader

J250 NURSERY FACILITY BUILDINGS

1. Administration Building

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 7,700 m2 OF ALUMINUM REQUIREMENTS FOR

KAIA’S ADMINISTRATION BUILDING

FLOOR AREA: 2,300m2

J250 NURSERY FACILITY BUILDINGS

2. Housing Facilities

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 9,800 m2 OF ALUMINUM REQUIREMENTS FOR

KAIA’S HOUSING ACCOMMODATIONS

TOTAL FLOOR AREA: 4,800m2 (FOR 8 HOUSING UNITS

& GRAND RECEIVING HALL)

J250 NURSERY FACILITY BUILDINGS

4. MEP Buildings

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 2,600 m2 OF ALUMINUM REQUIREMENTS

TOTAL FLOOR AREA: 2,900 m2 (FOR 4 UNITS)

J250 NURSERY FACILITY BUILDINGS

3. Housing Substation Building

HOUSING SUBSTATION: DESIGN, FABRICATION

AND INSTALLATION OF MORE THAN 500 m2 OF

ALUMINUM REQUIREMENTS

FLOOR AREA: 391m2

GARDEN CENTER SUBSTATION:

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 800 m2 OF ALUMINUM REQUIREMENTS

FLOOR AREA: 493 m2

CHECK POINT:

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 300 m2 OF ALUMINUM REQUIREMENTS

TOTAL FLOOR AREA: 64 m2 (FOR 2 UNITS)

TECH. UNITS:

DESIGN, FABRICATION AND INSTALLATION OF MORE

THAN 1,100 m2 OF ALUMINUM REQUIREMENTS

TOTAL FLOOR AREA: 330 m2 (FOR 10 UNITS)