View
4
Download
0
Category
Preview:
Citation preview
ProduktneuheitenProduct News
2010
www.kueberit.com
Gerade Verlegung bei Beton stufen
Straight fastening of concrete step
VERSION
3Schräge Verlegung
Sloping fastening
VERSION
13402
STEP-CLIP CHAMPIONDas neue, 2-teilige Treppenkanten-Profilsystem ist aufgrund der Champion-Technologie mit Ver-schiebenut für Materialstärken von 7 – 14 mm anpassbar. Während das BASIS-Profil fest mit dem Untergrund verschraubt wird, wird das TOP-Profil mit glatter Oberfläche schnell und bequem auf den Laminat-, Kork- oder Parkettboden aufgeclipst. Step-Clip Champion zeichnet sich durch folgen-de Produktvorteile aus:• nur noch ein Profil für alle Beläge von 7 – 14 mm• geringere Lagerkosten• optisch ansprechende Verlegung
The new two part stair nosing profile system can be used for material thicknesses of 7 – 14 mm due to the patented champion-technology with a unique adjustment. The base-profile is screwed to the subfloor and the top-profile can be clipped on the lami-nate-, cork-, or parquet-floor quickly and easily. The result is a perfect installation. The innovative Step-Clip Champion has the following features:
• only one profile for all floor coverings from 7 – 14 mm
• lower storage costs
• decorative finishes available
NEUES PROFILSYSTEM FÜR DIE TREPPENRENOVIERUNG
NEW PROFILE SYSTEM FOR STAIR RENOVATION
© Küberit ®
2-TEILIGES TREPPENKANTEN CLIP-SYSTEM FÜR LAMINAT, KORK UND PARKETTTWO PART STAIR NOSING CLIP-SYSTEM FOR LAMINATE, CORK AND PARQUET
Typ 5107 – 14 mm
TREPPENKANTENPROFIL STAIR NOSING
Gerade Verlegung
Straight fastening
VERSION
23400
Verlegung mit Blend-Winkel
Fastening with facing edge
VERSION
43401
Nur noch ein Profil für alle Bodenbelagshöhen von 7 – 14 mm Only one profile for all floor coverings from 7 – 14 mm
VERLEGEVARIANTEN STEP-CLIP CHAMPION · DIFFERENT FASTENING VERSIONS FOR STEP-CLIP CHAMPION:
WEITERE PRODUKTNEUHEITENMORE PRUDUCT NEWS
Das Farbspektrum bei den mit Holzdekor ummantelten Profilen oder den Profilen, bei denen ein Dekorstreifen eingeklebt werden kann, wird um das Trenddekor Wenge auf nunmehr 13 Farben erweitert. Bei den Dreikant-Treppenstangen ver-bessert Küberit außerdem die
Materialqualität und liefert diese zukünftig aus massivem Messing, wodurch das Sägen der Stangen vereinfacht wird. Ebenso wurde bei den Dehnfugenprofilen die Silikonfugenfarbe schwarz zusätz-lich mit ins Lagerprogramm aufge-nommen.
The colour spectrum of wood decor covered profiles or profiles with adhesive decor strips have now been expanded to 13 colours with the addition of the new Wenge wood decor. Küberit has improved the quality of their triangular stairrods and now supplies them in solid brass, which will simplify
the cutting process for the installer. A new black silicone joint is now available in the expansion joint profile range.
KÜBERIT
WENGE · WENGE
Messing, brass
poliert, polishedglanz vernickelt, Bright Nickel Plated Finish
16 x 16 mm
Längen/m, lengths/m
5,00
DREIKANT-STANGE · TRIANGULAR STAIRROD
Dehnfugenprofile 301S - 306S jetzt auch mit reißfester Silikonfuge in schwarz.Expansion joint profiles 301S - 306S now also available with a black flexible silicone joint
Längen/m, lengths/m
2,50
DEHNFUGENPROFILE · EXPANSION JOINT PROFILES
INNOVATIVE RAMPENPROFIL-LÖSUNGEN · INNOVATIVE RAMP PROFILE SOLUTIONS
269 U
Aluminium, aluminium
silber, silver
SBS U
Längen/m, lengths/m
3,00
267 EC
Aluminium, aluminiumsilber, silver
U
Längen/m, lengths/m0,2 x 0,2
68,5
20,5
267 U
Aluminium, aluminium
silber, silver
SBS U
Längen/m, lengths/m
3,00
266 U © Küberit ®
84
22,5
266 U
Aluminium, aluminium
silber, silver
SBS U
Längen/m, lengths/m
3,15
Neu sind die Rampenprofile 269 U und 267 U aus Aluminium für 8 mm bzw. 20,5 mm starke Bodebeläge. Für ein perfektes Verlegebild z.B. bei Shop-in-Shop Systemen sind für beide Profile vorkonfektionierte 90°-Ecken mit Verbinder erhältlich.
Das Rampenprofil 266 U aus Aluminium für 22,5 mm starke Beläge verfügt über eine rutsch- und feuchtigkeits hemmende P-Dich tungslippe aus EPDM, die bereits werkseitig vormontiert ist.
The new ramp profiles type 269 U and 267 U made of aluminium are available in an undrilled version and can be used for floor thicknesses of 8 and 20,5 mm. Fitting 90°-Corners with connector are available for both profiles to achieve a perfect look for example in “Shop-in-shop designs”.
The ramp profile type 266 U made of aluminium in an undrilled version for a floor thickness of 22,5 mm is provided with a pre-assembled P-sealing lip made of EPDM that is slip-resistant and restrains moisture.
269 EC
Aluminium, aluminium
silber, silver
U
Längen/m, lengths/m0,2 x 0,2
mit Verbinder with Connectors
mit Verbinder with Connectors
mit Verbinder with Connectors
mit Verbinder with Connectors
mit Verbinder with Connectors
PROFILE FÜR DESIGNBÖDEN, CV-, PVC-, KAUTSCHUK- UND LINOLEUM-BELÄGE
PROFILES FOR DESIGN FLOORS, CV, PVC, RUBBER AND LINOLEUM FLOORS
24
6
295
Aluminium, aluminium
poliert, polishedsilber, silvergold, goldsand, sand bronze, bronze edelstahl, stainless steel Ø=120 cm
Längen/m, lengths/m
2,70
SBS EB
Hochwertige Designbeläge werden immer häufiger als Basis für kreative Raumkonzepte gewählt. Aus diesem Grund hat Küberit sein umfangrei-ches Sortiment um die folgenden Profile speziell für Designböden oder CV-, PVC-, Kautschuk- und Linoleum-Beläge ergänzt: • zwei Rampenprofile 264 und 265 zum Höhenausgleich von 2,5 – 5 mm sowie 5 – 7 mm starken Bodenbelägen, versenkt gebohrt oder selbstklebend• das einfach biegbare T-Profil mit einer Abdeckbreite von 24 mm und für Belagstärken ab 5 mm. Der minimale Biegedurchmesser beträgt 120 cm• das Treppenkantenprofil 872 mit optisch dezenter Sicht- schutzkante und für 4 mm starke Beläge
The use of high-quality design coverings as a base for crea-tive floorings has increased enormously. Therefore Küberit has complemented it's range of products with the following profiles which specifically can be used for design floors, CV, PVC, rubber and linoleum floors:
• two ramp profiles type 264 and type 265 to compensate for height differences of 2.5 – 5 mm and 5 – 7 mm, countersunk drilled or self-adhesive
• the easily bendable T-profile for floors of 5 mm thickness and more that has a width of 24 mm and can be bent to a diameter of 120 cm
• stair nosing profile type 872 with a discreet finish
RAMPENPROFILE · RAMP PROFILES
40
30
872
Aluminium, aluminium
poliert, polishedsilber, silvergold, goldsand, sand bronze, bronze edelstahl, stainless steel
Längen/m, lengths/m
2,50 · 5,00
SBS SK V
28
2,5 - 5
264 / 264 U
Aluminium, aluminium
poliert, polishedsilber, silvergold, goldsand, sand bronze, bronze edelstahl, stainless steel
SBS
V · U
Längen/m, lengths/m
2,7028
2,5 - 5
38
5 - 7
265 / 265 U
Aluminium, aluminium
poliert, polishedsilber, silvergold, goldsand, sand bronze, bronze edelstahl, stainless steel
SBS
V · U
Längen/m, lengths/m
2,7038
5 - 7
TREPPENKANTENPROFIL FÜR BODENBELÄGE BIS ZU 4 MM · STAIR NOSING PROFILE FOR FLOORS UP TO 4 MM HEIGHT © Küberit ®
KÜBERIT-BEST
EINFACH BIEGBARES T-PROFIL · EASY BENDING T-PROFILE
© Küberit ®
265 U © Küberit ®
PROFIL-SYSTEM FÜR BODENBELAGSHÖHEN VON 7 – 18 MM
PROFILE SYSTEM FOR FLOOR COVERING HEIGHTS OF 7 – 18 MM
PPS®-CHAMPION XXL
Die Neuheit »PPS®-Champion XXL« wird schwer-punktmäßig eingesetzt bei der Verlegung von Parkett oder Massivholzdielen, um für den natürlichen Werkstoff Holz ausreichend Dehnungsfugen zu gewährleisten. Das System ist ausgelegt für Bodenbelagshöhen von 7 – 18 mm und zeichnet sich durch vier wesentliche Produktvorteile aus:
• Dehnungsfuge 13 % größer (jetzt 17,5 mm)
• Höhenverstellbereich +22%
• jetzt mit Torx-Schrauben
• Verstärkung im gesenkten Bohrloch – für einen sicheren Schraubensitz
The novelty »PPS®-Champion XXL« was mainly developed for the application of parquet and timber floor boards, to allow an effectual expansion joint for the natural material wood. The system was laid-out for floor covering heights of 7 – 18 mm and benefits from four vantages:
• the expansion joint was increased by 13 % to 17,5 mm
• adjustable range of the height +22%
• now with Torx screws
• the reinforcement of the countersunk drill holes ensures a safe fit of the screws
Typ 386 XXL 7 – 18 mm Typ 387 XXL 7 – 18 mm Typ 388 XXL 7 – 18 mm
© Küberit ® © Küberit ® © Küberit ®
ANPASSUNGS-PROFIL ADAPTING PROFILE
ABSCHLUSS-PROFILBORDER PROFILE
ÜBERGANGS-PROFILCONNECTING PROFILE
Jetzt mit größerer Dehnfuge und mit Torx-SchraubenNow with increased expansion joint and Torx screws
01/10
Küberit Profile Systems GmbH & Co. KG Römerweg 9 • 58513 Lüdenscheid • GermanyPostfach 81 33 • 58489 Lüdenscheid • Germany
Tel.: +49 (0) 23 51 / 95 07 – 0 Fax: +49 (0) 23 51 / 95 07 – 49
Internet: www.kueberit.com E-Mail: kueberit@kueberit.com • export@kueberit.com
ALUMINIUM-SOCKELLEISTE DECOLINOALUMINIUM SKIRTING DECOLINO
945 U
Aluminium, aluminium
silber, silver edelstahl fein geschliffen, stainless steel fine grinded
SBS U
Längen/m, lengths/m
2,50
• zum Patent angemeldete Aluminium- Sockelleiste mit 3 mm Einschub • beidseitig einsetzbar• zur Befestigung wird ein hochwertiges Klebeband angeboten • mit Ecken, Endstücken und Verbinder aus Aluminium• patent applied aluminium skirting board with 3 mm slot • can be installed on either side• an high-quality adhesive tape for the fixation is available • Corners, End caps and Connectors made of aluminium are available
ALUMINIUM-SOCKELLEISTE DECOLINO · ALUMINIUM SKIRTING DECOLINO
© Küberit ®
© Küberit ®
Recommended