View
241
Download
1
Category
Preview:
Citation preview
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
1/40
Member, Mapua Alumni Association
Alberta Chapter
RAY ALVARADO, P.E.
PROCESS ENGINEERINGPIPING ENGINEERINGPIPELINE ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
2/40
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
3/40
Acronyms
CAE Computer Aided EngineeringCAD Computer Aided DesignHMB Heat and Mass Balance, a Process activity
CFD Computational Fluid DynamicsFEA Finite Element AnalysisPFD Process Flow DiagramP&ID Piping and Instrumentation Diagram
LDT Line Designation TableROW Right of Way, for pipeline routingHDD Horizontal Directional Drilling, for pipelinecrossing
HVAC/R Heating, Ventilation, Air Conditioning &Refrigeration
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
4/40
PROCESS ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
5/40
PROCESS ENGINEERING
PROCESS ENGINEERING - an early project activity for analysis ofphysical separation or chemical conversion. It follows project definitionand early financial studies. System-wide Process simulation nowadays iscomputer-aided e.g. heat-and-mass balances, logical block flows, controlphilosophies, and equipment selection.
Important Deliverables:
Process Flow Diagrams(PFDs) - schematic showing major processequipment, main fluid flows, and basic stream characteristics (pressure,
level, temp., flow).Piping and Instrumentation Diagrams(P&IDs) - schematics with muchmore detail and confirmed data. Shown here are process conditionlimitations, major machinery specifications, minor equipment data, pipesize/details, instrumentation types, and more precise
controls/automation.-
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
6/40
PROCESS ENGINEERING
Usual entry-level positions:Chemical Process EngineerMechanical Process Engineer
Process Simulation Specialist
Minimum Skill Sets for a Junior Process Engineer:Undergraduate degree in Chemical Engineering,Mechanical Engineering, or Chemistry-relatedacademic programs.Basic knowledge of Fluid Statics/Dynamics,Thermodynamics, Heat Transfer, and Chemical Unit
Operations.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
7/40
PROCESS ENGINEERING CHEMCAD Process Simulation, Screen Images
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
8/40
PROCESS ENGINEERINGHeat and Mass Balance (HMB) Study, Selexol Process
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
9/40
PROCESS ENGINEERING Early concept of an oil refinery
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
10/40
PROCESS ENGINEERINGExample of Process Flow Diagram (PFD)
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
11/40
PROCESS ENGINEERINGExample of Piping & Instrumentation Diagram(P&ID)
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
12/40
PROCESS ENGINEERING
Process Engineering and Beyond:Next-Generation Process Simulators ..higherprocessing speeds, capable of more simultaneous
calculations, broader chemical database.Multi-Physics Tools to the Mainstream thesesoftware can now be fully integrated with existingProcess Simulators.Intelligent 2D Diagrams embedded data onPFDs and P&IDs will pop up once a particularelement is clicked or highlighted on the drawing.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
13/40
PIPING ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
14/40
PIPING ENGINEERING
Screen shots of CAEPIPE , a widely-used pipestress analysis software, showing the InputGeometry :
Piping layoutimported fromCAD 3D Model, ormanually re-created
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
15/40
PIPING ENGINEERING
Stress Output .watch for the Reds!
RED areas havehigher calculatedstresses(needs re-work)
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
16/40
PIPING ENGINEERING
Animation features ...it moves!
Shows areas of
excessive movemendirection of thermalgrowth, lift-off atsupport points, etc.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
17/40
PIPING ENGINEERING If not analysed properly, pipes may..
deform and collapse
.or lift -off from
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
18/40
PIPING ENGINEERING
PIPING ENGINEERING - a Mechanical sub-disciplinemainly to validate Piping Design s pipe -fittings layout,inside enclosed industrial areas, by computational analysisor technical reasoning.Such activities follow right after critical and major piping arecompletely laid out and supported.
PIPE - a closed cylindrical conduit for moving fluid (liquid,gas, solid particles) from one location to another, either bygravity or applied pressure.FITTINGS - are transition elements for connecting pipesinto an assembly or conduit network. Elbows, tees,flanges, reducers, and couplings are examples.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
19/40
PIPING ENGINEERING
Important Deliverables:Static & Dynamic Pipe Stress Analysis, Reports -computer- aided, hand calculations, and by -inspection
judgement.Finite Element Analysis (FEA) - on equipment nozzles,header branches, and support attachments. General Pressure Calculations wall thickness, branchreinforcement, leak-strength testing, and hot-tapcalculations. Sizing of Engineered Restraints - for spring supports,rollers, sway braces, sway struts, seismic snubbers, etc.
Detailing of Special Pipe Supports - as required bystress analysis results or vendor special requests.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
20/40
PIPING ENGINEERINGPlant Piping
3D layout ofpipingand pressurevessels
Offshore platformpiping
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
21/40
PIPING ENGINEERING
Usual entry-level positions:Piping Design EngineerPipe Stress EngineerPiping Materials Engineer
Minimum Skill Sets for a Junior Piping Engineer:Undergraduate degree in Mechanical Engineering,Chemical Engineering, or related sub-discipline.
Basic knowledge of Structural Mechanics, Strength ofMaterials, Fluid Dynamics, Machine Elements Design,Materials Science, and Welding Technology.Supplemental knowledge in Chemical Processes, HeatTransfer, Thermodynamics, and Stationary/Rotating
Mechanical Equipment.
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
22/40
PIPING ENGINEERINGExamples of Engineered Restraints
Constant spring can
Variable spring hangers
Sway strut assembly
Seismicsnubber
Sway brace assembly
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
23/40
PIPING ENGINEERINGExample of Custom-Ordered Supports
Support clamp withfabric lining, for
vibrating lines
Rigid hanger clamp,for pre-insulated line
Pipe clamp and shoe,pre-insulated cold line
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
24/40
PIPING ENGINEERING
Piping Engineering and Beyond: Full Integration of computational Analysis Softwarewith 3D CAD Model seamless and bi -directional compatibility of both CAD and CAEactivities, thus substantial savings of time andresources.FEA/CFD Multi-Physics to theMainstream complex analysis and engineering
calculations can now be simultaneouslyperformed e.g. structural mechanics, fluid flow,vibration, and heat transfer.Opportunities in Oilfield Frontier Areas .morecomplex piping needs for fixed offshore platforms,floating FPSOs, marine tanker, and Arctic process
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
25/40
PIPING ENGINEERING FEA & Multi-Physics Analysis Tools
Multi-Physics Analy(thermal + structuralof vessel
FEA of stab-inbranch
FEA of
crimped pipe
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
26/40
PIPING ENGINEERINGCFD & Multi-Physics Analysis Tools
ANSYS 3D Multi-Physics (wind +thermal + struct.) around reactors
ABAQUS 2D Multi-Physics (fluid flow +thermal)
COMSOL 3D Multi-Physics(fluid
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
27/40
PIPELINE ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
28/40
PIPELINE ENGINEERING
PIPELINE ENGINEERING - a Mechanical sub-discipline mainly tovalidate Pipeline Design s overland or seafloor routing, bycomputational analysis or technical reasoning, outside the fencedindustrial area.
Such activities usually start after initial project development, geodetic(land) or bathymetric (ocean) surveys, and preliminary right-of-wayrouting.
Pipelines are generally classified into:
Land Pipelines, Underground (Buried)
Land Pipelines, AbovegroundUnderwater Pipelines
Important Deliverables/Involvement:
Hydraulic Analysis , Steady-State and/or Transient (Surge)
Pipeline Stress Analysis
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
29/40
PIPELINE ENGINEERING
Usual entry-level positions:Pipeline Design EngineerPipeline Stress Engineer
Pipeline Hydraulics Engineer
Minimum Skill Sets for a Junior Pipeline Engineer:Undergraduate degree in Mechanical or Civil
Engineering.Basic knowledge of Engineering Surveying, StructuralMechanics, Strength of Materials, Fluid Dynamics,Machine Elements Design, Materials Science, andWelding Technology.Supplemental knowledge of Heat Transfer,
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
30/40
PIPELINE ENGINEERINGLand Pipeline Routing
Natural gas pipelineright-of-way Rout ing S tudytaken from terrain survey
Plan-and-Profi le Drawin g ,with data from routing study
and terrain survey
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
31/40
PIPELINE ENGINEERINGPipeline Analysis
Rivercrossing..suspension
bridge and cable stay
Seismic analysis.andmitigation measures for Trans- A lask a Pipel ine while crossingthe Denali fault line
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
32/40
PIPELINE ENGINEERINGEngineered Pipeline Supports
Detail of H-Supportand side bumpers
Trans -A laska Pipeline ammonia-filledH-Support , with cooling fins, piledriven through permafrost
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
33/40
PIPELINE ENGINEERINGUnderwater Pipelines
Underwater gas pipelineon uneven seafloor, withfree-spanned sections
Underwater pipelines, foroil-
PIPELINE ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
34/40
PIPELINE ENGINEERING Seafloor Routing Study of underwater oilpipeline
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
35/40
PIPELINE ENGINEERING Pipeline Stability Analysis & FEA
Overstress at seabed touchdownarea, due to excessive bending
from pipelay surface vessel
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
36/40
PIPELINE ENGINEERING
Pipeline Engineering and Beyond:Integration of Pipeline Surveys with RoutingSelection in intelligent 3D format, these
related activities will be fully synchronized foraccuracy and cost savings.Pipeline 3D Models Imported Into Multi-PhysicsSimulation ..like stress analysis, hydraulic
surge, flow assurance, global buckling, or icegouging hazards.Deeper, Colder in search for oil and gas, theindustry is pushing the limits of pipelinetechnology beyond the worlds Continental Shelf
PIPELINE ENGINEERING
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
37/40
PIPELINE ENGINEERING Arctic Pipelines, Ice Gouge Hazard Analysis &FEA
Burial depth iscritical, to preventpipeline damage
Gouged seafloor imaginBerg gouging
Sea ice gouging
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
38/40
PIPELINE ENGINEERINGCFD & Multi-Physics Analysis Tools (ANSYS)
3D CFD (fluid flow +thermal) at junction
3D CFD (fluid flow +structural) through valve
3D CFD (fluid flowonly) through blades
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
39/40
Trivia Question:
Whats the differencebetweenPIPING andPIPELINES?
Other than spelling of course
8/11/2019 Process-Piping-Pipeline Engg PDP_Ray R10copies
40/40
Answers:
PIPINGInside the enclosed industrial area or fenced plot limits.Physical configuration can be very complex.Mostly of short length, specified in feet or meters.
Uses lower grade steel, thus pipe wall is thicker.Can operate at very high temperatures and pressures, orconversely at cryogenic temperatures and partial vacuum.
PIPELINES
Outside the enclosed industrial area or fenced plot limits.Physical configuration is usually simple, from point A topoint B.
Almost always very long, specified in miles or kilometres.Uses higher grade steel, thus pipe wall is thinner.
Recommended