View
218
Download
0
Category
Preview:
Citation preview
(Excluding V.A.T.)PRICE LISTAPRIL 2013
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:12 Page 1
2
Total Management Policy Statement
The total Management System of Philmac ensures that theCompany’s products and activities meet the quality expected by our customers and are generated in a safe andhealthy workplace with proper regard to environmental considerations.
The policy is founded on a philosophy of continuousimprovement in every aspect of the business, always withthe aim to enhance customer satisfaction.
Continuous improvement initiatives are the responsibility ofall employees and the policies and procedures that guidetheir actions and support this aim. The Company’s TotalManagement System conforms to statutory health and safety requirements and international quality standards.
The commitment to the Total Management philosophy stated in this policy is essential for the long term benefit of our customers, employees and business and is totallysupported by company management.
Graham IssittGENERAL MANAGER EUROPE
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:12 Page 2
3
Philmac 3G Metric/Imperial™ compression fittings
The UK's number one choice.
Market focussed. 3G Metric/Imperial™ was designed for the UKmarket providing an insert free system
Approved. Fully WRAS approved for above and below ground use.
Innovative. A modern, versatile fitting for today's market.
High performance. Manufactured from high-performancethermoplastic materials with outstanding impact, UV and corrosionresistance. Rated to 16 Bar (230psi).
Flexibility not complexity. One range, removing the need fordedicated fittings and inserts.
Problem solving. Old black pipes are difficult to identify.3G Metric/Imperial™ connects to all classes without inserts.Normal Gauge requires a connection kit.
Simple to use. No need to push the pipe past the seal, with Philmac'sSlide & Tighten™ technology installation couldn't be simpler. Simplyinsert the pipe fully into the fitting and tighten the nut.
Compact design.An ideal fitting for use in confined spaces.The design and size of the fittings means that in installations takingplace between fixed points, the manipulation of the pipe into the fittingbecomes easy.
No loose components. If the nut is removed there is no danger oflosing components, as the collet and seal ring are retained in the body.
Philmac 3G metric/Imperial™ - The complete solution.
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:13 Page 3
Page
METRIC/IMPERIALTMIntroduction 5Fittings range 6-16Poly x Copper/PEX push fit (above ground) 12Saddles 12Plastic stopcock and ball valve 13Liners and connection kits 14-16Installation instructions 17-21
VALVESPlastic F.I., M.I. and Air Release 22Back flow prevention 23Metal stopcocks 24
LARGE BORE METRICFittings range 25-28
UNIVERSAL TRANSITION COUPLINGS Introduction 29-30Fittings range 31-33Installation instructions 34Size guide 35
BSP FITTINGSFittings range 36-40High Flow Ballcock 40
SUNDRIES 41
PIPE STANDARDS 42-43
PROPERTIES 44-45Chemical resistance 45
SALES AREAS 46-47
CONTENTS4
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:13 Page 4
11
MATERIALS & COMPONENTS
NUT – Acetal
BODY – Polypropylene
SPLIT COLLET – Acetal
SEAL – Nitrile Rubber
5
3G Metric/ImperialTM - The complete solution
Patent protected the Metric/ImperialTM plastic compression fitting is the product ofthe company’s unrelenting commitment to continuous improvement and a culturebased on innovation and ingenuity.
Seven into one will goConnectsBlue MDPE BS 6572Black MDPE BS 6730Low Density Class C BS 1972Low Density Class D BS 1972High Density Class C BS 3284High Density Class D BS 3284IRS 135 Heavy Gauge BS 1972/61
No need for inserts or dedicated fittings.Liners must be used with metric pipe sizes 20, 25, 32, 50 & 63mm
No pipe preparation is needed and no force is required to push the pipe past theseal, so installation could not be faster or easier. Simply insert the pipe fully into thefitting and then tighten the nut. Assembly is so easy that you can even do it underlive conditions. No special tools are required and there is no need to disassemblethe fitting before use because the Metric/ImperialTM compression fitting is suppliedpre-assembled and ready to use.
MATERIALS & COMPONENTS
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 5
METRIC/IMPERIALTM
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALJOINERPOL X POL
METRIC/IMPERIALSLIP JOINERPOL X POL
METRIC/IMPERIALREDUCING JOINERPOL X POL
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
25mm/3/4" x 20mm/1/2"32mm/1" x 20mm/1/2"32mm/1" x 25mm/3/4"40mm/11/4" x 25mm/3/4"40mm/11/4" x 32mm/1"50mm/11/2" x 25mm/3/4"50mm/11/2" x 32mm/1"50mm/11/2" x 40mm/11/4"63mm/2" x 32mm/1"63mm/2" x 40mm/11/4"63mm/2" x 50mm/11/2"
PRICEEACH £
912291339144915591669177
901229013390144901559016690177
91329142914391539154916391649165917491759176
10105111
111111
105511111111
4.034.24
10.0622.1623.1534.85
5.816.50
13.4024.4330.9646.61
8.3013.4013.4025.2525.2537.1337.1338.6049.9151.8251.82
UK WATER REGULATIONS ADVISORY SCHEME APPROVED
A P P ROVED
P RODUCT
for MDPE liners see page 14
6
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 6
METRIC/IMPERIALTM 7
for Liners and connection kits see page 32
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALEND CONNECTORPOL X M.I. BSP
METRIC/IMPERIALEND CONNECTOR POL X F.I. BSP
20mm/1/2" x 1/2" BSP20mm/1/2" x 3/4" BSP20mm/1/2" x 1" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP25mm/3/4" x 1" BSP32mm/1" x 3/4" BSP32mm/1" x 1" BSP32mm/1" x 11/4" BSP32mm/1" x 11/2" BSP40mm/11/4" x 1" BSP40mm/11/4" x 11/4" BSP40mm/11/4" x 11/2" BSP40mm/11/4" x 2" BSP50mm/11/2" x 11/2" BSP50mm/11/2" x 2" BSP63mm/2" x 11/2" BSP63mm/2" x 2" BSP
20mm/1/2" x 1/2" BSP20mm/1/2" x 3/4" BSP20mm/1/2" x 1" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP25mm/3/4" x 1" BSP32mm/1" x 3/4" BSP32mm/1" x 1" BSP32mm/1" x 11/4" BSP40mm/11/4" x 11/4" BSP40mm/11/4" x 11/2" BSP50mm/11/2" x 11/2" BSP50mm/11/2" x 2" BSP63/2" x 2" BSP
PRICEEACH £
922192229223923192329233924292439244924592539254925592569265926692759276
98219822982398319832983398429843984498549855986598669876
101010101010555511111111
10101010101055511111
3.644.427.004.764.637.416.746.74
14.1014.1015.8615.8617.6520.1617.2319.8324.2724.27
4.935.176.855.455.326.346.346.37
18.7618.6619.6720.2228.3428.34
for MDPE liners see page 15for MDPE liners see page 14
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 7
METRIC/IMPERIALTM
for Liners and connection kits see page 32for MDPE liners see page 15
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALTEE - EqualPOL X POL
METRIC/IMPERIALSLIP TEEPOL X POL
METRIC/IMPERIALTEE - UnequalPOL X POL
METRIC/IMPERIALTEE POL X M.I. BSP
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63/2"
20mm/1/2"25mm/3/4"32mm/1"50mm/11/2"63mm/2"
25mm/3/4" x 25mm/3/4" x 20mm/1/2"25mm/3/4" x 25mm/3/4" x 32mm/1"32mm/1" x 32mm/1" x 25mm/3/4"50mm/11/2" x 50mm/11/2" x 25mm/3/4"50mm/11/2" x 50mm/11/2" x 32mm/1"50mm/11/2" x 50mm/11/2" x 40mm/11/4"63mm/2" x 63mm/2" x 25mm/3/4"63mm/2" x 63mm/2" x 32mm/1"63mm/2" x 63mm/2" x 50mm/11/2"
25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP
PRICEEACH £
932293339344935593669377
9032290333903449036690377
933293349343936393649365937393749376
99319932
1055111
11111
555111111
55
7.2411.3314.1833.8233.1051.27
10.4115.6219.3242.9765.92
11.6517.0217.0241.5941.5935.1252.4852.4851.27
9.0710.97
for MDPE liners see page 14
8
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 8
METRIC/IMPERIALTM
for Liners and connection kits see page 32for MDPE liners see page 15
9
for Liners and connection kits see page 32
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALTEE POL X F.I. BSP
METRIC/IMPERIALELBOWPOL X POL
METRIC/IMPERIALREDUCING ELBOWPOL X POL
20mm/1/2" x 1/2" BSP20mm/1/2" x 3/4" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP25mm/3/4" x 1" BSP32mm/1" x 1/2" BSP32mm/1" x 3/4" BSP32mm/1" x 1" BSP32mm/1" x 11/4" BSP40mm/11/4" x 11/4" BSP40mm/11/4" x 11/2" BSP50mm/11/2" x 1/2" BSP50mm/11/2" x 3/4" BSP50mm/11/2" x 11/2" BSP50mm/11/2" x 2" BSP63mm/2" x 2" BSP
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
25mm/3/4" x 20mm/1/2"
PRICEEACH £
9421942294319432943394419442944394449454945594619462946594669476
952295339544955595669577
9532
101055555551111111
10105111
10
7.0110.6211.1811.1813.5213.6013.6013.6027.3927.2630.6231.3431.3431.3440.7144.00
5.387.96
11.5924.8126.9036.57
7.96
for MDPE liners see page 14
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 9
METRIC/IMPERIALTM
for Liners and connection kits see page 32
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALELBOW POL X F.I. BSP
METRIC/IMPERIALELBOW POL X M.I. BSP
METRIC/IMPERIALTANK CONNECTORASSEMBLYc/w Seal Washers
METRIC/IMPERIALEND CAP
20mm/1/2" x 1/2" BSP20mm/1/2" x 3/4" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP25mm/3/4" x 1" BSP32mm/1" x 1" BSP32mm/1" x 11/4" BSP40mm/11/4" x 11/4" BSP40mm/11/4" x 11/2" BSP50mm/11/2" x 11/2" BSP50mm/11/2" x 2" BSP63mm/2" x 2" BSP
20mm/1/2" x 1/2" BSP25mm/3/4" x 3/4" BSP32mm/1" x 1" BSP
25mm/3/4" x 3/4" BSP32mm/1" x 1" BSP
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
PRICEEACH £
962196229631963296339643964496549655966596669676
972197329743
97809781
902990399049905990699079
10101010105511111
10105
105
10105111
4.886.176.846.669.929.97
22.0021.8923.8523.6830.9431.05
4.886.84
11.58
10.2712.37
4.385.887.85
15.5118.9726.87
for MDPE liners see page 14
10
NOTE: FOR LARGER TANK INLETS SEE PAGE 40.
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 10
METRIC/IMPERIALTM 11
DESCRIPTION REF. NO. SIZES PACKS
METRIC/IMPERIALWALL PLATE ELBOWPLASTIC
METRIC/IMPERIALWALL PLATE ELBOWMETAL
HOSE UNION BIB TAP
ARCTIC ICE RESISTANTBIB TAP
HOSE UNION SNAPCONNECTOR
20mm/1/2" x 1/2" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP
20mm/1/2" x 1/2" BSP25mm/3/4" x 3/4" BSP
DZR 1/2" c/w double check valveDZR 3/4" c/w double check valve
1/2" BSP3/4" BSP● Water: -20°C
1/2"
3/4" (to suit 8022 only)
PRICEEACH £
902290319032
92289229
30223033
80218022
HOSCON21HOSCON22
555
55
11
11
1
1
9.9811.6712.77
22.0627.35
17.2425.96
14.0919.77
1.48
1.70
for Liners and connection kits see page 32for Liners and connection kits see page 32for MDPE liners see page 14
NEW
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 11
METRIC/IMPERIALTM
PE x Copper/PEX Push Fit (above ground)
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
DESCRIPTION REF. NO. SIZES PACKS
METRIC SADDLE
FLANGE ADAPTORFlange to BS 4504
JOINER
ELBOW
50mm x 25mm/3/4"63mm x 25mm/3/4"
50mm/11/2" x 2"63mm/2" x 2"
20mm/1/2" x 15mm25mm/3/4" x 15mm25mm/3/4" x 22mm32mm/1" x 22mm32mm/1" x 28mm
20mm/1/2" x 15mm25mm/3/4" x 15mm25mm/3/4" x 22mm32mm/1" x 28mm
PRICEEACH £
9063590735
8776687776
13211331133213421343
1521153115322543
11
11
11111
1111
23.1423.82
95.7095.70
8.9110.8610.8614.9716.32
8.9110.8610.8618.46
FOR CONNECTIONS TO PEX PIPE PLEASE REFER TO PIPE MANUFACTURERS INSTALLATIONINSTRUCTIONS AND ONLY USE PEX LINERS COMPATIBLE WITH THE PIPE BEING USED
for MDPE liners see page 14
NEW
12
NEW
(STAINLESS NUTS & BOLTS)
SUITABLE FOR USE WITH ANY METRIC O.D. PIPE
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 12
FLANGE ADAPTOR & PLASTIC VALVES 13
Stopcock
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
METRIC/IMPERIALSTOPCOCKPOL X POL
METRIC/IMPERIALSTOPCOCKPOL x FI
20mm/1/2"25mm/3/4"32mm/1"
25mm/3/4" x 1/2" 25mm/3/4" x 3/4" 32mm/1” x 3/4" 32mm/1" x 1"
282228332844
28312832 28422843
552
5522
23.2334.3552.44
33.2133.2150.7050.70
see page 38 for M.I. and F.I ball valves
METRIC/IMPERIALBALL VALVEPOL X POL
20mm/1/2" (20mm Nominal Bore)25mm/3/4" (20mm Nominal Bore)25mm/3/4" (25mm Nominal Bore)32mm/1" (25mm Nominal Bore)
95272953729527395373
1111
30.8832.2638.9742.42
Ball valve
NEW
12 BAR RATED
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 13
METRIC/IMPERIALTMLINERS & CONNECTION KITS14
MDPE LINERSBS 6572 (below ground)BS 6730 (above ground)
METRIC/IMPERIALCONNECTION KIT
METRIC/IMPERIALREDUCING SETSBS 6572/6730 MetricBS 1972/3284 & IRS 135-Imperial
METRIC/IMPERIALNORMAL GAUGECONNECTION KITBS 1972 IRS 134
20mm25mm32mm50mm63mm
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
25mm/3/4" x 20mm/1/2"32mm/1" x 20mm/1/2"32mm/1" x 25mm/3/4"50mm/11/2" x 25mm/3/4"50mm/11/2" x 32mm/1"63mm/2" x 25mm/3/4"63mm/2" x 32mm/1"63mm/2" x 50mm/11/2"
1/2"*3/4"1"11/4"11/2"2"
*fits 3/8" LD and HD
7800278003780047800678007
999002999003999004999005999006999007
9803298042980439806398064980739807498076
930029300393004930059300693007
10010050
202010555
10101055555
101010555
0.310.330.561.081.33
1.051.171.692.183.805.08
2.814.014.018.328.32
12.5512.5512.55
0.961.161.382.993.705.62
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
NEW
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 14
CONNECTION KITS 15
METRIC/IMPERIALNORMAL GAUGEREDUCING SETS
METRIC/IMPERIALCOPPER CONNECTION KITTable X & Y
METRIC/IMPERIALBLANKING PLUG
3/4" x 1/2"1" x 1/2"1 x 3/4"
20mm/1/2" x 15mm25mm/3/4" x 22mm32mm/1" x 28mm25mm/3/4" x 15mm
20mm/1/2"25mm/3/4"32mm/1"40mm/11/4"50mm/11/2"63mm/2"
931329314293143
96002960039600496032
912891389148915891689178
101010
10101010
10105555
3.695.114.38
3.504.316.054.31
1.441.982.123.473.926.56
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
Connection Kit for copper pipe for above and below ground use
NOT SUITABLE FOR PB OR PEX PIPE
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 15
LINERS & CONNECTION KITS16
METRIC PVC/ABSCONNECTION KIT
IMPERIAL PVC/ABSCONNECTION KIT
20mm25mm32mm40mm50mm63mm
1/2" (20mm/1/2" body)3/4" (25mm/3/4" body)1" (32mm/1" body)11/4" (40mm/11/4" body)11/2" (50mm/11/2" body)*2" (63mm/2" body)*
*Complete with nut and seal
942029420394204942059420694207
94402944039440494405944061944071
????????????
????????????
3.183.273.375.947.569.52
3.183.273.375.94
15.0118.81
DESCRIPTION REF. NO. SIZES PACKS PACKSPRICEEACH £
Connection Kit for Metric and Imperial PVC or ABS
NEW
NEW
101010111
101010111
END LOAD RESISTANT TO 20 BAR
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 16
17
2. Insert liner in MDPE pipeWith MDPE pipe a liner must beused to ensure conformance withWRAS.
5. Pipe insertionSlide the pipe fully into the fitting tothe point where the stop is felt
8. Imperial fully installedFor connections to Imperial PE pipe(BS1972/3284 and IRS 135 HeavyGauge) steps 5 and 6 instructionsare the same as for MDPEconnections.
3. No liner or insert required forimperial pipeFor IRS 134 use connection kit.
6. Nut tighteningTighten the nut by hand and thenfirmly with a wrench.
9. DisassemblySimply loosen the nut until 2threads are showing. Pipe will bereleased and can simply be pulledout of the fitting.
1. Cut the pipe squareNo need to prepare pipe end.Chamfering or lubrication is notrequired.
4. Ready to use positionThe fitting is pre-assembled andready to use. Always ensure the nutis fully relaxed and 2 threads areshowing before inserting the pipe.
7. Fully installedFitting is now fully installed.
INSTALLATION INSTRUCTIONS - METRIC/IMPERIALTM
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 17
18
or small sifo styles – one wTTw
e reductions (left) an zor small si
e reduction zge siror laf nd
ight)r ns (
or small sifo styles – one wTTw
e reductions (left) and zor small si
e reductions (zge siror lafe reductions (left) and
ight)re reductions (
Disassem1.
e the vorem
ylbDisassem
.utne the
ed. These arevoust then be remmThe white split collet and seal
ylbDisassem2.
iate connection kit re the appropkaTTaSmall diameter change kit is illustratedInstall Reducing Kit3a
ed. These areing rThe white split collet and seal
iate connection kit Small diameter change kit is illustratedInstall Reducing Kit
reinstalation laterRetain this Met
reinstalation lateror f ut nial ric-ImperRetain this Met
no longer required.
with the tapered end pointing outward.
with the tapered end pointing outward.
eads visiro thwtWind the
Reinstall the MetInstall N4a Install N4a
lebeads visiving a le,, leyy,ut onto bodnWind the
ial Nutric-ImperReinstall the Met Nut Nut
iate connection kit re the appropkaTTaillustratediskitchangediameterLarge
Install the Reducing Kit3 Install the Reducing Kit3b3b
iate connection kit illustrated
4 Install Nut4
lebeads visiro thwtut onto bodnWind the
rReinstall the MetInstall Nut4b4b
leving a le,, leyy,ut onto bod
ial Nutric-Impe
uctionsrinstPipe is installed as per pipe installation
eads visiro thwt
uctionsPipe is installed as per pipe installation
lebeads visi
.evoper the image ab
uctionsrinstPipe is installed as per pipe installation
lebeads visiro thwt
Pipe is installed as per pipe installation
le
REDUCING KIT INSTALLATION INSTRUCTIONS
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 18
19
INSTALLATION INSTRUCTIONS - METRIC/IMPERIALTM NORMAL GAUGE
5. Fit collet into body offitting. For 1/2", 1", 1-1/4".and 1-1/2" fit cap on thecollet.
6. Replace nut. Leave twothreads showing.
7. Insert pipe. Insert the pipeinto the fitting to where thestop is felt.
8. Tighten by hand and thenfirmly with a wrench.
1. Remove nut and retain.2. Remove collet. This is nolonger required.
3. Remove seal. This is nolonger required.
4. Insert NG seal. Markedwith red dot for identification.
* can also be used on 3/8" Low and High Density pipeOther sizes1/2" Insert one piece adaptor with cap facing out.1" seal first followed by collet and cap.1-1/4" & 1-1/2" Body liner first followed by seal, collet and cap.
93002 93003 93004 93005 93006 93007
1/2"* 3/4" 1" 1-1/4" 1-1/2" 2"
1 part 2 part 3 part 4 part 4 part 2 part
Seal & collet Seal, collet & cap Body liner, seal,collet & cap
Body liner, seal,collet & cap Seal & collet
3/4" and 2" Instructions
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:14 Page 19
20
Cop o rTTo r
p p g
2 DisassemblyRemove the White 3G Collet.Remove the Black rubber seal.These are no longer required.
3 AssemblyBefore installing the CopperAdaptor check the rubber sealand adaptor are assembledcorrectly.
4 Install the Copper Adapter
5 AssemblyInstall 3G Metric-Imperial Nut
1 DisassemblyRemove the 3G nut and keep forreinstallation later
6 Cut the Pipe SquareCut the pipe square. There is noneed to prepare the pipe end.Ensure the nut is fully relaxedand there are two threadsshowing prior to inserting thepipe
7 Witness Mark the PipeTo ensure the correct insertiondepth witness mark the pipe bylining up the pipe against thefitting, using the flange of thebody as an indicator.
8 Pipe InsertionInsert the pipe fully into thefitting up to the witness mark.
7 A
9 Nut Tightening
The nut should be tightenedfirmly with multi-grips orsimilar plumbing tools until thenut just touches the flange onthe body of the fitting.
COPPER CONVERSION KIT INSTALLATION INSTRUCTIONS
Not suitable for PB or PEX pipe.
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:15 Page 20
21
PVC CONNECTION KIT INSTALLATION INSTRUCTIONS
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:15 Page 21
BALL VALVEF.I. X F.I. BSP
BALL VALVEM.I. X M.I. BSP
AIR RELEASEVALVEF.I. BSP
3/4” F.I. x 3/4” F.I.1” F.I. x 1” F.I.11/4” F.I. x 11/4” F.I.11/2” F.I. x 11/2” F.I.2” F.I. x 2” F.I.
3/4” M.I. x 3/4” M.I.1” M.I. x 1” M.I.
1” BSP
5500255003550045500555006
5540255403
55033
11111
11
1
25.8235.9746.7155.0270.47
23.7930.69
42.28
FI, MI Ball Valves and Air Release Valve
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
NOM.BORE
2025324050
2025
25
VALVES22
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:15 Page 22
VALVES
DESCRIPTION REF. NO. SIZES PACKS
FOOT VALVEF.I. BSP
SINGLE CHECKNON RETURNVALVEF.I. BSP X F.I. BSP
DZR DOUBLECHECK VALVEF.I. BSP X F.I. BSPto BS 6282
3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
3/4” F.I. x 3/4” F.I.1” F.I. x 1” F.I.11/4” F.I. x 11/4” F.I.11/2” F.I. x 11/2” F.I.2” F.I. x 2” F.I.
1/2” F.I. x 1/2” F.I.3/4” F.I. x 3/4” F.I.1” F.I. x 1” F.I.
PRICEEACH £
5501255013550145501555016
5502255023550245502555026
111011120211303
11111
11111
111
39.4742.4652.1663.1884.64
36.6338.8048.3057.3778.23
34.2544.9456.62
Back flow prevention
NOM.BORE
2025324050
2025324050
23
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:15 Page 23
METAL VALVES
F.I. X F.I. – G.M.(BS.5433 Type2)
METRIC/IMPERIALEND CONNECTORPOL X M.I. BSP
1/2” x 1/2” F.I.3/4” x 3/4” F.I.1” x 1” F.I.11/2” x 11/2” F.I.2” x 2” F.I.
20mm/1/2" x 1/2" BSP20mm/1/2" x 3/4" BSP20mm/1/2" x 1" BSP25mm/3/4" x 1/2" BSP25mm/3/4" x 3/4" BSP25mm/3/4" x 1" BSP32mm/1" x 3/4" BSP32mm/1" x 1" BSP32mm/1" x 11/4" BSP32mm/1" x 11/2" BSP40mm/11/4" x 1" BSP40mm/11/4" x 11/4" BSP40mm/11/4" x 11/2" BSP40mm/11/4" x 2" BSP50mm/11/2" x 11/2" BSP50mm/11/2" x 2" BSP63mm/2" x 11/2" BSP63mm/2" x 2" BSP
25112522253320552066
922192229223923192329233924292439244924592539254925592569265926692759276
11111
101010101010555511111111
41.9556.56
104.50266.27372.02
3.644.427.004.764.637.416.746.74
14.1014.1015.8615.8617.6520.1617.2319.8324.2724.27
Metal stopcocks
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
ADAPT TO PE USING THE METRIC/IMPERIAL M.I. END CONNECTOR
24
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:15 Page 24
www.philmac.co.uk
LARGE BORE METRIC FITTINGS
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:16 Page 25
DESCRIPTION REF. NO. SIZES PACKS
JOINERPOL X POL
REDUCING JOINERPOL X POL
END CONNECTORPOL X M.I. BSP
END CONNECTORPOL X F.I. BSP
75mm90mm110mm
75mm x 63mm90mm x 75mm110mm x 90mm
75mm x 2” BSP75mm x 3” BSP90mm x 3” BSP110mm x 4” BSP
75mm x 2” BSP90mm x 3” BSP110mm x 4” BSP
PRICEEACH £
718871997100
718771987109
7286728872987209
788678987809
111
111
1111
111
55.5768.10
109.58
54.7972.01
105.87
36.7939.1542.2871.09
36.0142.2893.93
Plastic compression fittings for MDPE pipe.
LARGE BORE METRIC26
16 BAR RATED
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:16 Page 26
LARGE BORE METRIC
DESCRIPTION REF. NO. SIZES PACKS
TEE – EqualPOL X POL
TEEPOL X F.I. BSP
ELBOWPOL X POL
PRICEEACH £
738873997300
748674987409
758875997500
111
111
111
79.23110.41219.31
75.6286.21
158.81
87.72105.87179.98
75mm90mm110mm
75mm x 2” BSP90mm x 3” BSP110mm x 4” BSP
75mm90mm110mm
27
16 BAR RATED
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:16 Page 27
LARGE BORE METRIC
ELBOWPOL X F.I. BSP
END CAP
FLANGE ADAPTORFlange to BS 4504
75mm x 2” BSP90mm x 3” BSP110mm x 4” BSP
75mm90mm110mm
90mm x 3”110mm x 4”
PRICEEACH £
768676987609
708970997009
7779877709
111
111
11
54.7954.7993.93
37.8151.4260.50
130.55163.57
DESCRIPTION REF. NO. SIZES PACKS
28
16 BAR RATED
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:17 Page 28
U N I V E R S A L T R A N S I T I O N C O U P L I N G
The Universal Connection
www.philmac.co.uk
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 29
UNIVERSAL TRANSITION COUPLINGS
Universal Transition Couplings
The generation of mechanical couplings, designed to make a simple task of joining metric polyethylene pipes to pipes of a different material. They providethe ultimate in pipe connection flexibility, enabling fast, easy, effective connections between polyethylene pipe and most other recognised pipe materials.
Universal transition couplings can join Metric PE pipe to Copper, Alkathene,PVC, ABS, Stainless, Galvanised Iron and even Lead.
Universal transition couplings also offer effective burst repair to most recognised pipe materials with ease of installation via a slip facility.
• one fitting covers a wide range of joints
• no time-consuming pipe preparation required
• superior end-load resistance
• flexibility in both pipe material and size
• proven history with sales of over three million units
• pressure rated to 12.5 Bar at 20°C
30
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 30
UNIVERSAL TRANSITION COUPLINGS
UNIVERSALTRANSITIONJOINERUTC X POLc/w Metric MDPELiner
UNIVERSALTRANSITIONELBOWUTC X POLc/w Metric MDPELiner
15-21mm x 20mm/1/2”15-21mm x 25mm/3/4”21-27mm x 20mm/1/2”21-27mm x 25mm/3/4”27-34mm x 20mm/1/2”27-34mm x 25mm/3/4”27-34mm x 32mm/1”27-34mm x 40mm/11/4”34-39mm x 32mm/1”34-39mm x 40mm/11/4”39-43mm x 32mm/1”39-43mm x 40mm/11/4”47-49mm x 50mm/11/2”47-49mm x 63mm/2”59-61mm x 63mm/2”
15-21mm x 25mm/3/4”21-27mm x 25mm/3/4”21-27mm x 32mm/1”27-34mm x 25mm/3/4”27-34mm x 32mm/1”
103210331042104310521053105410551074107510641065108610871097
15331543154415531653
111111111111111
11111
16.6816.6816.6816.6819.8219.8222.9822.9823.6823.6826.4726.4730.1830.1835.92
16.6816.6819.8219.8219.82
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
For connection from Metric PE pipe to Copper, Alkathene, PVC, ABS,Stainless, Galvanised Iron and even Lead
31
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 31
UNIVERSAL TRANSITION COUPLINGS
DESCRIPTION REF. NO. SIZES PACKS
UNIVERSAL TRANSITIONDOUBLE ENDEDREPAIR JOINER
UNIVERSAL TRANSITIONREDUCED REPAIRJOINER
15-21mm x15-21mm21-27mm x 21-27mm27-34mm x 27-34mm34-39mm x 34-39mm39-43mm x 39-43mm47-49mm x 47-49mm59-61mm x 59-61mm
21-27mm x 15-21mm27-34mm x 21-27mm27-34mm x 15-21mm39-43mm x 27-34mm
PRICEEACH £
1133114411551177116611881199
1143115411531165
1111111
1111
16.6816.6819.8226.4726.4730.1835.92
16.6819.8219.8226.47
For connection repairs of Copper, Alkathene, PVC, ABS, Stainless,Galvanised Iron and even Lead
32
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 32
UNIVERSAL TRANSITION COUPLINGS
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
For connection from BSP pipe to Copper, Alkathene, PVC, ABS, Stainless,Galvanised Iron and even Lead
UNIVERSALTRANSITIONM.I. END CONNECTORUTC X M.I. BSP
PIPE GAUGEfor use withUniversal TransitionCoupling
15-21mm x 1/2” BSP15-21mm x 3/4” BSP15-21mm x 1” BSP21-27mm x 3/4” BSP21-27mm x 1” BSP21-27mm x 11/4” BSP27-34mm x 3/4” BSP27-34mm x 1” BSP27-34mm x 11/4” BSP27-34mm x 11/2” BSP
15-34mm34-43mm43-63 mm
1231123212331242124312441252125312541255
113511361137
1111111111
111
11.7411.7411.7411.7411.7411.7414.8614.8614.8614.86
P.O.A.P.O.A.P.O.A.
33
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 33
34
2. Ready to use positionThe fitting is pre-assembled andready to use, however alwaysensure the nut is backed off and 3threads are showing. Pipes at thetop of the tolerance may require 5threads showing.
5. Fully installedThe fitting is fully installed when thenut cannot be tightened any furtherwith reasonable force.
3. Pipe insertionTo ensure adequate insertion depth,witness mark the pipe to the flangeon the fitting. Then insert pipe to thecorrect depth.
6. DisassemblyUnscrew the nut with a wrench.Pipe will be released and can bepulled out of the fitting.
1. Cut pipe to lengthCut pipe square and to length usingflange on the central body as aguide. Ensure end of connectingpipe is undamaged and clean.
4. Nut tighteningTighten nut firmly with a wrench.nut will not butt against the bodyflange when the pipe size is at thetop end of the fitting tolerance.
INSTALLATION INSTRUCTIONS - UTC(Joins MDPE, PE, copper, stainless steel, ABS, PVC, galvanised iron and lead pipes)
• Use a pipe measuring gauge if there are doubts on pipe outside diameter (OD) size.• Installation instructions are also applicable and available to the MDPE/PE end.
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 34
35
UTC RANGE
Alka
then
e
Norm
al Ga
uge I
RS 1
34
Heav
y Gau
ge IR
S 13
5
Copp
er
Galva
nise
d Iro
n
Stain
less S
teel
Met
ric A
BS/P
VC
Impe
rial A
BS/P
VC
Lead
15-21
3/8"
1/2"
15m
m
3/8"
3/8"
16m
m &
20m
m
3/8"
3/8"
5lb
(20m
m O
D)
1/2"
2lb
(16m
m O
D)
4lb
(19.
2mm
OD)
21-27
1/2"
3/4"
1/2"
22m
m
1/2"
1/2"
25m
m
1/2"
1/2"
6lb
(21.
6mm
OD)
7lb
(23.
2mm
OD)
9lb
(25.
4mm
OD)
3/4"
4lb
(25.
2mm
OD)
5lb
(26.
4mm
OD)
27-34
3/4" 1" 3/4"
28m
m
3/4"
3/4"
32m
m
3/4"
3/4"
9lb
(30.
6mm
OD)
11lb
(32.
8mm
OD)
1"
6lb
(31m
m O
D)
7lb
(31.
6mm
OD)
34-39
1"
1-1/
4"
1"
35m
m
1" 1" 1"
1-1/
4"
7lb
(37.
6mm
OD)
39-43
1-1/
4"
42m
m
1-1/
4"
1-1/
4"
40m
m
1-1/
4"
1"
16lb
(41m
m O
D)
1-1/
4"
9lb
(39.
2mm
OD)
47-49
1-1/
2"
1-1/
2"
1-1/
2"
1-1/
2"
1-1/
2"
12lb
(48m
m O
D)
59-61
2" 2" 2" 2"
UTC - GUIDE
Guide only. Actual size depend
ant on
pipe cond
ition
.
Fittin
g sele
ction
can
be m
ade e
asier
with
use
of th
e Phi
lmac
Pipe
Gau
ge
Copper
If us
er d
oes n
ot w
ant t
o use
a U
TC th
e cop
per n
eeds
to b
e M.I.
or F.
I. en
ded
so th
at w
e can
offe
r a M
et/Im
p fit
ting t
o sui
t.Sa
me r
ule a
pplie
s for
54m
m O
.D. c
oppe
r. Us
e cop
per c
ompr
essio
n fit
ting t
o ada
pt to
M.I.
or F.
I. an
d th
en u
se M
et/Im
p fit
ting.
Lead
The g
ener
al co
nditi
on of
lead
pipe
can
mak
e sizi
ng d
ifficu
lt at
top
and
botto
m to
leran
ce. I
f the
reco
mm
ende
d UT
C is
not s
ucce
ssfu
lth
e nex
t size
, up
or d
own,
dep
endin
g on
fit sh
ould
be of
fere
d.
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:18 Page 35
…a tough, corrosion resistant range of fittings to suit BSP thread standards
PHILMAC THREADED FITTINGS
The alternative to rust...
www.philmac.co.uk
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:19 Page 36
BSP THREADED FITTINGS
TEEFEMALE
ELBOWFEMALE
ELBOWMALE X FEMALE
PLUG
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
1/2” x 1/2” BSP3/4” x 3/4” BSP1” x 1” BSP 11/4” x 11/4” BSP11/2” x 11/2” BSP2” x 2” BSP
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
451145224533454445554566
461146224633464446554666
469146924693469446954696
401140224033404440554066
101010552
101010552
101010552
101010101010
3.534.205.268.258.98
12.54
2.993.233.725.306.348.41
2.923.253.815.306.128.32
1.501.792.082.863.194.13
A comprehensive range of corrosion resistant, reinforced Polypropylenefittings
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
N.B. All threads are BSP tapered. Use PTFE Tape on threads for lubrication purposes. Do not overtighten.
37
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 37
BSP THREADED FITTINGS
DESCRIPTION REF. NO. SIZES PACKS
BUSH – REDUCING
NIPPLE
NIPPLE – REDUCING
3/4” x 1/2” BSP1” x 1/2” BSP1” x 3/4” BSP11/4” x 1/2” BSP11/4” x 3/4” BSP11/4” x 1” BSP11/2” x 1/2” BSP11/2” x 3/4” BSP11/2” x 1” BSP11/2” x 11/4” BSP2” x 1/2” BSP2” x 3/4” BSP2” x 1” BSP2” x 11/4” BSP2” x 11/2” BSP3” x 2” BSP (PVC)4” x 3” BSP (PVC)
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
3/4” x 1/2” BSP1” x 1/2” BSP1” x 3/4” BSP11/4” x 1/2” BSP11/4” x 3/4” BSP11/4” x 1” BSP11/2” x 1/2” BSP11/2” x 3/4” BSP11/2” x 1” BSP
PRICEEACH £
41214131413241414142414341514152415341544161416241634164416541864198
421142224233424442554266
422142314232424142424243425142524253
10101010101010101010101010101011
101010555
101010555555
1.952.122.123.013.123.123.603.723.723.725.816.006.006.006.00
17.8934.76
1.521.742.192.743.244.30
2.002.572.673.163.163.263.933.933.93
continued
38
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 38
BSP THREADED FITTINGS
DESCRIPTION REF. NO. SIZES PACKS
NIPPLE – REDUCINGCONTINUED
SOCKET
REDUCING SOCKET
CAP
11/2” x 11/4” BSP2” x 1/2” BSP2” x 3/4” BSP2” x 1” BSP2” x 11/4” BSP2” x 11/2” BSP
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
3/4” x 1/2”1” x 1/2”1” x 3/4”11/4” x 1”11/2” x 3/4”11/2” x 1” 2” x 3/4” 2” x 1” 2” x 11/2”
1/2” BSP3/4” BSP1” BSP11/4” BSP11/2” BSP2” BSP
PRICEEACH £
425442614262426342644265
431143224333434443554366
432143314332434343524353436243634365
490149024903490449054906
555555
101010555
10105555555
101010555
3.885.225.225.225.225.16
3.143.634.507.358.03
11.35
3.514.367.117.117.767.76
10.9710.9710.97
2.993.724.204.746.057.56
N.B. All threads are BSP tapered. Use PTFE Tape on threads for lubrication purposes. Do not overtighten.
39
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 39
BSP THREADED FITTINGS
DESCRIPTION REF. NO. SIZES PACKS
HOSE TAILS
TANK INLET MALE
HIGH FLOWBALLCOCK
1/2”3/4”1”11/4”11/2”2”
1/2”3/4”1”11/4”11/2”2”
3/4” standard thread 25mm tail3/4” long thread 45mm tail c/w nut3/4” long thread 45mm tail bent arm
PRICEEACH £
RXHT15RXHT20RXHT25RXHT32RXHT40RXHT50
RXTTI15RXTTI20RXTTI25RXTTI32RXTTI40RXTTI50
RXPTV20RXPTV20LRXPTV20B
10101010105
111111
111
2.893.023.383.643.894.67
5.906.126.928.62
11.5714.06
25.3626.7726.09
NEW
40
NEW
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 40
SUNDRIES
PIPE CUTTER
SPANNER
PIPE CLIPSSuitable for MDPE pipe
Up to 32mm (Medium)Up to 63mm (Large)
20 - 32mm 'Y' spanner (plastic)40 - 63mm 'Y' spanner50 - 110mm 'C' spanner
16mm20mm25mm32mm40mm50mm63mm90mm110mm
Sundry equipment
DESCRIPTION REF. NO. SIZES PACKS PRICEEACH £
17691770
70243170577050
430543064307430843094310431243134314
40.65119.29
6.2439.1554.11
0.800.941.001.111.491.632.054.786.62
11
111
101010101010101010
41
NEW
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 41
42
PIPE STANDARDS
NOMINAL SIZEINCH2025325063
MINMM2025325063
MAXMM20.325.332.350.463.4
MINMM2.32.33.04.65.8
MAXMM2.62.63.45.26.5
OUTSIDE DIAMETER WALL THICKNESSMEDIUM DENSITY PIPE TO WATER INDUSTRY BS 6572 & BS 6730
NOMINAL SIZEINCH3/81/23/41
1 1/41 1/2
MINMM17
21.226.633.442.148.1
MAXMM17.321.526.933.742.548.5
MINMM2.83.44.35.46.87.8
MAXMM3.13.74.75.97.58.6
CLASS D LOW DENSITY (TYPE 32) POLYETHYLENE PIPES TO BS1972/67
NOMINAL SIZEINCH3/81/23/41
1 1/41 1/2
23
MINMM17
21.226.633.442.148.160.188.6
MAXMM17.321.526.933.742.548.560.689.3
MINMM2.22.73.44.25.36.17.611.2
MAXMM2.53.03.74.65.86.78.412.3
CLASS C LOW DENSITY (TYPE 32) POLYETHYLENE PIPES TO BS1972/67
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 42
NOMINAL SIZEINCH1/23/41
1 1/41 1/2
234
MINMM21.226.633.442.148.160.188.6113.9
MAXMM21.526.933.742.548.560.689.3114.7
MINMM1.82.32.83.64.15.17.59.6
MAXMM2.02.63.14.04.55.68.210.6
OUTSIDE DIAMETER WALL THICKNESSCLASS C HIGH DENSITY (TYPE 50) POLYETHYLENE PIPES TO BS3284/67
NOMINAL SIZEINCH1/23/41
1 1/41 1/2
2
MINMM
16.9524.9531.2537.5043.8060.00
MAXMM
17.3025.4031.7538.1044.4560.85
MINMM2.303.103.103.103.504.65
MAXMM2.603.503.503.503.905.20
NORMAL GAUGE BS1972/61 IRS 134
NOMINAL SIZEINCH1/23/41
1 1/41 1/2
MINMM
20.7027.0533.8542.0047.95
MAXMM
21.1027.4534.1042.6548.65
MINMM4.304.304.305.055.35
MAXMM4.854.854.855.605.90
HEAVY GAUGE BS1972/61 IRS 135
NOMINAL SIZEINCH3/81/23/41
1 1/41 1/2
23
MINMM17
21.226.633.442.148.160.188.6
MAXMM17.321.526.933.742.548.560.689.3
MINMM1.92.32.93.74.65.36.69.7
MAXMM2.12.63.24.15.15.87.310.7
CLASS D HIGH DENSITY (TYPE 50) POLYETHYLENE PIPES TO BS3284/67
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 43
PROPERTIES
• Dynamic sealing method: Themechanical advantage of the nut threadcompresses the seal into position, eliminatingresistance when inserting the pipe into thefitting so there is no risk of seal distortion ordisplacement.
• No loose components: If the nut isremoved there is no danger of losingcomponents, as the collet and seal ring areretained in the body of the fitting. Losingcomponents in the trench becomes a thingof the past.
• Designed to minimise pipe twist: Thefitting has been designed to minimise pipetwist as the nut is tightened. Maximum pipetwist is approximately a quarter turncompared to one and a half turns with manyother fittings. Pipe twist can impact on notonly the connection you have just made butalso on the connection at the other end ofthe line.
• Approvals: Philmac fittings are WRASapproved for above and below ground use.
High performance
• Made from advanced thermoplasticmaterials: 3G Metric/Imperial™ ismanufactured from lightweight highperformance thermoplastic materials withoutstanding impact, UV, chemical andcorrosion resistance. The material is non-toxic and taint-free.
• Rated to 1600 kpa: Metric/Imperial™ ispressure rated to 16 Bar (230psi) to meetthe needs of high pressure systems.
• 50 year+ design life: Built to withstandthe toughest conditions to ensure longevityand durability, Metric/Imperial™ has a 50year+ design life.
Complete coverage
• Wide range: The new Philmac 3GMetric/Imperial™ range is comprehensive:straight and reducing joiners, tees, elbows,end connectors and caps ranging from20mm to 63mm. Also available are copperconnection kits, normal gauge (IRS 134)connection kits, reducing kits and blankingplugs, ball valves, stopcocks, wall plate elbowsand tank connectors.
• Copper connection Kits: Philmac’s allnew carborundum gripper design has beenintroduced into the 3G Metric/Imperial™copper connection kit. With no steelcomponents in the gripping mechanism,there is absolutely no risk of electrolysis.
44
3G Metric/Imperial™
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 44
PROPERTIES
Effect on Water Philmac does not impart to water any odour,taste, colour, or any constituents in concentrations that could be injurious to health.
Philmac complies with:BS 6920 ‘Suitability of non metallic products for use incontact with potable water intended forhuman consumption with regard to theireffect on the water’.
Operating Temperatures-10o C to +25o CNot suitable for hot water applications.
Fluids other than WaterPipes connected by Philmac may convey awide variety of fluids. For resistance to common chemicals consider the followingtable a guide only.
For specific applications please contact our Customer Service SupportCentre for advice and information.
Telephone 01323 847323 Facsimile 0800 590028
45
Chemical Resistance ChartChemical Satisfactory Not
SatisfactoryAmmonium Hydroxide
Alcohol
Acetone
Auto Transmission Fluid
Antifreeze
Benzene
Butane
Calcium Salts
Caustic
Chlorine
Soda (40% aqueous)
Glycol
e
d
K
Oils
P
Cyanide
T
T
T
Cresol
Citric Acid
Copper Salts
Ethylene Alcohol
Ethyl
Diesel
Formic Acid
Gasolin
Hydrocholric Aci
erosene
Mineral
Methane
Methylene Chloride
Nitric Acid
etroleum Oils
Sewerage
Sodium
Sulphuric Acid
oluene
urpentine
ransformer Oil
Zinc Salt Solution
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 45
SALES AREAS
BARRY McKIBBINArea Sales Manager07909 004560barry.mckibbin@philmac.co.uk
JON CLARKArea Sales Manager07885 281439jon.clark@philmac.co.uk
DAVID MARTINArea Sales Manager07787 105342david.martin@philmac.co.uk
STEVE JEFFERYArea Sales Manager07795 302102stephen.jeffery@philmac.co.uk
MATT PROLEKey Account Manager Southern Region07771 954477matt.prole@philmac.co.uk
46
UK Sales Areas
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 46
SALES AREAS
METRIC
BARRY McKIBBIN07909 004560
JON CLARK07885 281439
STEVE JEFFERY07795 302102
DAVID MARTIN07787 105342
MATT PROLE07771 954477
For support and technical informationcontact our Sales Area Managers
47
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 47
Philmac
Diplocks WayHailshamEast SussexBN27 3JFEngland
Tel: 01323 847323Fax: 0800 590028
E-mail: enquiries@philmac.co.ukwww.philmac.co.uk
To contact your local Philmac Sales Manager please refer to page 47
PH0413
Registered office:
Philmac UK
Walsall RoadNorton Canes Cannock StaffordshireWS11 9NSUnited Kingdom
For further information on all Philmacproducts and services contact our Internal Sales Department asdetailed below.
Philmac UK is a trade name of GlynwedPipe Systems Ltd. Company number 1698059
71236 Pricelist Jan 2013_Layout 1 11/02/2013 09:20 Page 48
Recommended