View
5
Download
0
Category
Preview:
Citation preview
PRECISION SEEDING SYSTEM
PRECISION SEEDING SYSTEM (PSS) THE NEXT GENERATION OF CONSERVATION TILLAGE.
THE HORWOOD BAGSHAW PSS OFFERS: • Better soil structure • Low soil disturbance • Better seed placement • Improved seed germination and yield • Reduced fertiliser toxicity.
THE PSS COMBINES: • The ground-following capability of a
unique parallelogram and presswheel, with
• The versatility of variable rate Airseeders to ensure accurate seed and fertiliser metering. Precision Seeding Module - fertiliser & seed placement with presswheel.
Seed
Fertiliser
HORWOOD BAGSHAW’S PRECISION SEEDING SYSTEM FOR CONSERVATION FARMING OPTIMISES SEEDING PERFORMANCE.
The deeper, more open frame layout of the PSS facilitates: • The use of parallelograms which improve
yield through better fertiliser and seed placement
• Improvedtrashflow.
Wider tine spacings, combined with accurate GPS guidance, facilitate: • Inter-row planting of alternate crops • Use of paired row and ribbon-seeding
systems• Shielded chemical application for safer,
more cost-effective chemical usage.
HorwoodBagshaw’sPSSmoduleincorporates:
1. HYDRAULIC FRONT TINE. The hydraulic front tine places fertiliser at a controlled depth below the seed bed. The front tine is designed to work deeper than the seeding tine, leading to: • Increasedwaterinfiltration• Utilisation of sub-soil moisture reserves
for earlier germination• Reduced fertiliser toxicity• Improved plant growth.
Tine breakout can be adjusted on-the-go from the cab, matching breakout forces to fieldconditions:• From 75lbf • Up to 660lbfThis breakout provides a genuine ‘hardpan-busting’capability,creatingaloosened, deep band for fertiliser placement and deeper root establishment and growth.
The hydraulic front tine is available in two height-adjustable straight, edge-on formats. The low-disturbance, edge-on tines provide multiplebenefits:• Reduced horsepower requirement
saves fuel • Lower soil disturbance reduces weed
germination • Openings are restricted to the seed
row to conserve moisture.
Tine shank options HorwoodBagshaw’sclevertinedesignallows a user to choose either of two high-performance, vertically-adjustable straight shanks:
The Zero Till shankThe Zero Till shank accommodates a point which, in turn, provides a low disturbance seeding performance.
The Minimum Till shankTheMinimumTillshankisaterrific ‘all-round’option,whichwhenfittedwith:• A Knife Point – The PSS operates as an
advanced seeding implement• A Share – The PSS provides genuine ‘ChiselPlough’cultivatingperformance.
2. PARALLELOGRAM. The parallelogram controls the rear seeding tine’sground-following;leadingtomoreconsistent seeding depth. Seed depth control leads to more accurate seed placement, which produces more even crop development. • The rear section of the parallelogram can
be easily removed, allowing the PSS to be used for chisel ploughing
• In the event of very wet conditions, the parallelograms can be locked in several positions, moving the presswheels out-of-action
• The rear seeding tine can be removed/locked out-of-action in rough, rocky or wet conditions and seeding then conducted in single shoot mode through the front tine.
3. REAR SEEDING TINE. Seed can be placed: • Inline with the fertiliser tine • In a side-band, offset from the
front tine. TheHorwoodBagshawAirseeder’sBlending System allows selected amounts of fertiliser to be placed with theseedasa‘starter’forvigorous,earlyplant growth.
4. PRESSWHEEL. Essentialtofinishingthejob,thepresswheelpresses the seed onto the soil’s surface, optimising seed/soil contact which facilitates earlier seed germination/crop establishment and avoids crusting.
The presswheel also creates a furrow which: • Harvests valuable rainfall • Reduces evaporation from the
loosened soil • Provides shelter for the young plant.
THE MOST FLEXIBLE & VERSATILE SYSTEM AVAILABLE. HorwoodBagshaw’sprecisionmoduleoffers an unmatched range of options: • A choice of tines • A choice of cultivating points for the front
fertiliser tine • A choice of seeding points and boots for
the rear seeding tine
Offset seed placement. In-line seed placement. Presswheels optimise soil/seed contact.
Minimum Till Tine.
Parallelogram presswheel creates early, even emergence.
• A choice of presswheels • Seed can be placed either in-line with
the front fertiliser tine or side-banded • The rear seeding tine can be locked
in-line, or be allowed to pivot for curves and corners.
A UNIQUE RAISED BED & CONTROL TRAFFIC OPTION.Sow inter-row on raised beds by:• Shifting the whole machine sideways by
50mm (using an offset drawbar tongue)• Re-positioning the wheels back into the controltrafficlines/tracks (using the slide-adjustable axles).
AIRSEEDERS. Combine the PSS with a Horwood Bagshaw AirseederThe PSS will place your seed where youwantit,sothere’snobetterway to optimise your results than with the metering accuracy of a Horwood Bagshaw Airseeder.
VARIABLE RATE TECHNOLOGY. HorwoodBagshaw’svariablerateAirseeders offer reduced costs and increased yields. The variable rate technology allows seed and fertiliser application to be matched to varying soil types and conditions.
Ganular ModelsWe offer a comprehensive selection of granular models ranging from• 2,000 litre to 21,000 litre capacities• In mounted, tow-behind and
tow-between design.
Liquid ModelsBe at the leading edge of Liquid technology with a Horwood Bagshaw Liquid Airseeder.Apply your granular and liquid products at accurate variable rates through up to 6 compartments.
Foratrue‘one-pass’operation,thePSSismore than capable of carrying an A-Frame mounted Liquid Tank for weed control or liquid fertilising (see photo next page).
Deep-Framed PSS for optimal trash-flow.
THERE’S NO SUBSTITUTE FOR QUALITY
Liquid Quad Airseeder.
A-Frame Mounted Liquid Tank.
BROADACRE MODELS CONTROLLED TRAFFIC & BED FARMING MODELSCentre Frame
Fixed Frame Single Fold Double Fold Single Fold 2m Tracks Single Fold 3m Tracks
CompactCentre 10’6”(3.2m) 27’(8.2m)4 beds
NarrowCentre 11’10”(3.6m) 23’(7.0m) 27’(8.2m) 20’(6.0m)3 beds
23’(7.0m)
26’(7.9m)4 beds
27’(8.2m)
MediumCentre 13’0”(4.0m) 32’(9.7m) 36’(10.9m) 39’(11.9m) 29’(9.0m)3 beds
32’(9.7m)
39’(11.9m)
39’(11.9m)4 beds
StandardCentre 17’9”(5.4m) 19’(5.6m) 40’(12.0m) 43’(13.1m) 47’(14.3m) 55’(16.7m) 62’(18.8m)NUMBER OF TINES
At 83/4”spacings(225mm) 55 73
At10”spacings(250mm) 23 28 32 38 44 48 51 55 65 75 32 27 28 32 32 37 38 48 49
At12”spacings(300mm) 19 23 27 32 36 40 43 47 55 63 23 27 32 40
FRAME DIMENSIONS
Height (transport) 6’10”(2.1m) 10’8”(3.2m) 12’1”(3.7m) 13’3”(4.0m) 15’4”(4.7m) 17’4”(5.3m) 16’5”(5.0m) 16’5”(5.0m) 18’10”(5.7m) 14’9”(4.5m) 16’9”(5.1m) 14’9”(4.5m) 10’0”(3.1m) 10’8”(3.2m) 14’2”(4.3m) 12’1”(3.7m) 14’3”(4.3m) 13’3”(4.0m) 17’4”(5.3m) 17’3”(5.3m)
Width (transport) 18’11”(5.8m) 17’7”(5.4m) 17’7”(5.4m) 18’11”(5.8m) 18’11”(5.8m) 18’11”(5.8m) 23’6”(7.2m) 23’6”(7.2m) 23’6”(7.2m) 23’6”(7.2m) 23’6”(7.2m) 11’1”(3.4m) 17’7”(5.4m) 17’7”(5.4m) 17’7”(5.4m) 17’7”(5.4m) 18’11”(5.8m) 18’11”(5.8m) 18’11”(5.8m) 18’11”(5.8m)
Length A-Frame Length 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 20’8” 20’8” 14’9” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0” 16’0”
Main Frame Depth 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4” 14’4”
Total Length 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 34’9”(10.6m) 34’9”(10.6m) 29’1”(8.8m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m) 30’0”(9.1m)
WEIGHT kg 4400 5800 6300 7000 7600 7700 8500 9000 9700 12500 14000 6300 4600 5800 3850 6300 6800 7000 7700 7700
TYRES CentreFrameandWings
KEY MEASUREMENTS (common to all machines)
UnderFrameClearance 28” (710mm)UnderTineClearance 23” (575mm)RoadTransportClearance 113/4” (285mm)Working Depth 6” (150mm)
15.5/80 x 24
Specifications: Table includes most popular models. Contact your dealer for more options. Specifications may change without notification.
SINGLE FOLD – NARROW CENTRE.
DOUBLE FOLD – STANDARD CENTRE.
SINGLE FOLD – STANDARD CENTRE.
Water Harvesting Furrows.
3-ROW FRAME LAYOUT.
CNH Industrial Australia Pty. Ltd. 9 Adelaide Road, Mannum, SA 5238 Phone (08) 8561 6200 Email info@horwoodbagshaw.com.au www.horwoodbagshaw.com.au
Recommended