View
0
Download
0
Category
Preview:
Citation preview
PrecisionAssembly Presses
Manual PressesPneumatic PressesHydropneumatic PressesPress Accessories
...the assembly experts
Assembling
Pressing-in
Bending
Riveting
Cutting
Punching
Crimping
Stamping
TABLE OF CONTENTS
Baltec presses can perform a variety of tasks quickly, preciselyand easily. Examples are:
2
Manual Presses
Accessories for Manual Presses 3Toggle Presses with round ram 4-7Toggle Presses with square ram 8-11Rack and Pinion Presses with round ram 12-13Rack and Pinion Presses with square ram 14-15
Pneumatic Presses
Manually Assisted Pneumatic Toggle presses 16Direct-Acting Pneumatic Presses 17-27Direct-Acting Press Cylinders 20-28MicroPress® with Square Ram 30-31Pneumatic Toggle Presses 32-37Hydropneumatic Presses 38-39
Press Control Systems 40Pneumatic Slide Table 41TPC-MIDI Process Monitoring 42-43
We reserve the right to make technical modifications.
Diagrams in the catalog showwhich accessories are possible forwhich presses.
Precision ram adjustment (DP)As toggle presses do not achieve their maximumforce until bottom dead center (BDC), adjusting theheight of the press head by means of the threadedspindle is often too inaccurate. The precision ramadjustment enables the press pressure point to beprecisely set directly at the ram. The scale on theadjustment ring enables the fine setting to be readoff to 0.02 mm. The adjustment range is ±1.5 mm.The precision ram adjustment is used when theutmost precision is required for the press depth.Ideal for prototype manufacture and serialproduction when accurate and easy adjustmentwithin the tolerance range is required.
Micrometer stop (MICRO)The micrometer stop is used with rack and pinionpresses for high-precision assembly work or forwhen the tool has to be accurately positioned. Thisenables the press stroke length to be accuratelyadjusted to 0.01 mm
Return travel lock (HS)The return travel lock for toggle and rack and pinionpresses is an effective contribution to quality assuranceduring production. The return travel lock rules outpartial strokes and therefore incomplete operations.Forming, assembly and joining operations are alwaysreliably and completely executed, as the return strokeof the press is blocked on the downward stroke. Theinterlock is only released and the lever can only bereturned when the stroke is complete. The Quick-Release mechanism enables this inhibit to be releasedand jammed parts to be removed in any position. TheQuick-Release is automatically deactivated when thelever is returned.
Table bore (TB)The bottom part of the tool can be mounted in thecentric table bore. Fixing is by means of a transversescrew in all models up to 80 mm throat. The tablebore enables the tool to be changed quickly andreduces set-up time. The alignment accuracy of theram bore with the table bore is <0.05 mm.
stroke counter (Z)A rapid overview of the number of items producedcan be obtained with the five-digit stroke counter.The number of items can be reset.
ACCESSORIES FOR MANUAL PRESSES
3
EP - the ERGOPRESS® seriesthe concept of a modern,ergonomic manual togglepress for manual workstationsin industrial series production.
The ERGOPRESS® modelsrepresent a logicaldevelopment of the manualpress-in technology.
ERGOPRESS® hand lever• 360° variably adjustable hand lever• the basic version of the press can be rapidly adapted for left- or right-handed operation just by switching over the toggle lever
• the laterally offset lever ensures unobstructed view of the work area
This means higher output through optimum destressing:with ERGOPRESS®, cramped and incorrect posture duringoperation is a thing of the past. This reducesabsenteeism, increases the motivation of personnel,makes work easier and lowers production costs.
4
ERGOPRESS® hand lever
switched-over for left-handed
operation
Manual toggle presses with roundram EP series / L-EP series withextra-high daylight
Toggle presses only produce their rated force atthe end of the stroke, the bottom dead center(BDC). In doing so, the high working pressure ofthe press is achieved using the toggle mechanismwith a relatively low effort (approximately 150N) from the user.
Toggle presses are therefore used where the fullforce of the press is only required over a shortdistance at the end of the working stroke, e.g. inassembling, punching, riveting, stamping, gluingetc.
All Baltec toggle presses are recognized by thefollowing quality features:
• factory-set bottom dead centre (BDC)• simple adjustment of the height of the
press head using a threaded spindle• hardened and ground ram• long, honed and therefore highly precise
ram guide• ground press table
MANUAL TOGGLE PRESSES
A
B
B
C x D
E
E
F
C x G
K
Capacity
Working stroke
Throat
Daylight
Daylight with DP
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø x Depth with DP
Ram Ø
Space requirement
Stand height
Weight
MANUAL TOGGLE PRESSES
5
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
Manual toggle presses with round ramEP series / L-EP series with extra-high daylight
L-presses are used wherever tall or long parts are eithermachined or pressed in and therefore require a high daylight.
Possible applications:• for applications and tools, which require a largeinstallation area, for example:- when pressing-in long axes or- when bushing or machining tall parts
Type EP 750-40
7.5
40
80
58-265
38-250
157x115
12
10H7x25
10H7x25
24
157x237
450
ca. 20
L-EP 750-40
7.5
40
80
55-375
39-359
157x115
12
10H7x25
10H7x25
24
157x280
570
ca. 28
EP 1200-60
12.0
60
80
62-240
48-231
157x115
12
10H7x30
10H7x25
30
157x237
450
ca. 24
L-EP 1200-60
12.0
60
80
75-338
53-328
157x115
12
10H7x30
10H7x25
30
157x280
570
ca. 32
DP
HS
Z
TB
Precision ram adjustment
Return travel lock
Counter
Table bore 12H7
Accessories (See page 3) Please specify when ordering
DP
HS
Z
TB
DP
HS
Z
TB
DP
HS
Z
TB
DP
HS
Z
TB
EP 500-40 L-EP 1200-60EP 750-40with accessoriesDP - Precision ram adjustmentHS - Return travel lock
EP 500-40
5.0
40
63
40-213
20-197
110x65
10
10H7x25
10H7x25
20
110x164
355
ca. 10
Manual toggle presses with round ramAPK T series presses with 250 mm throat
Wherever oversized components have to be processed, a larger throat is needed, for example to process PCB,sheet materials and similar pieces. For this purpose, Baltec XL presses with 250 mm throat are used.
The base is a durable welded construction on which the different standard press heads are mounted.
APK T-rangeThe extra powerful hand-operated toggle presses of the APK T 3 and APK T 4 ranges are especially suitable forthe frequently changing applications in model making and in the workshop. Their high forces of up to 30 kNenable them to be flexibly used for widely differing applications.
The advantages:• Choice of different stroke lengths• Extra stable press base design• Daylight easily adjustable by means of the standard press head threaded spindle height adjustment• The nominal force of the press can be achieved with moderate applied force
XL-APKT range with 250 mm throatA larger throat is required wherever bulky parts are processed, e.g. the processing of printed circuit boards,sheet metal and similar parts. Baltec XL presses with 250 mm throat are employed in such cases. The base is astable welded structure to which different standard press heads can be fitted.
MANUAL TOGGLE PRESSES
6
Manual toggle presses with round ramAPK T series presses with 250 mm throat
DP
HS
Z
TB
DP
HS
Z
TB
APK T3-S-60
25.0
60
100
-
65-295
44-274
-
185x145
12
10H7x30
10H7x25
30
185x320
520
ca.63
APK T4-S-30
30.0
30
100
-
55-285
34-264
-
185x145
12
10H7x30
10H7x25
30
185x320
520
ca.63
APK T3-S-40
25.0
40
100
-
60-290
46-274
-
185x145
12
10H7x30
10H7x25
30
185x320
520
ca.58
XL-APK T3-40
15.0
40
250
100
88-166
72-150
100
200x200
12
10H7x30
10H7x25
30
200x465
465
ca.54
XL-APK T3-40
15.0
60
250
100
90-168
69-147
100
200x200
12
10H7x30
10H7x25
30
200x465
465
ca.58
APK T3-60
15.0
60
100
-
51-172
30-151
-
175x140
12
10H7x30
10H7x25
30
175x300
425
ca.43
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
A
H
B
B
BB
CxD
E
F
C x G
K
Capacity
Working stroke
Throat
Throat C-frame
Daylight
Daylight with DP
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø x Depth with DP
Ram Ø
Space requirement
Stand height
Weight
7
Type
DP
HS
Z
TB
Precision ram adjustment
Return travel lock
Counter
Table bore 12H7
Accessories (See page 3) Please specify when ordering
DP
HS
Z
TB
DP
HS
Z
TB
MANUAL TOGGLE PRESSES
APKT 3-40 XL-APK T 3-40APK T 3-S-60
APK T3-40
15.0
40
100
-
49-168
35-154
-
175x140
12
10H7x30
10H7x25
30
175x300
425
ca.39
DP
HS
Z
TB
DP
HS
Z
TB
8
Manual toggle presses with square ramVK series / L-VK series
The square ram has significant advantages over theround ram:• absolute torsion resistance• hardened, precisely ground ram• play-free movement of the press arm• adjustable gib strips of the square ram• large support surface for the tool• guides on the tool are therefore usually unnecessary• virtually maintenance-free operation
Additional standard equipment:• height adjustment of the press head using a threaded spindle
• side-located measuring strip for repeatable accurate setting of press head
These models can also be fitted with the usual options:• precision ram adjustment for precise setting of the insertion depth (DP)
• return travel lock for quality assurance during production (HS)
• stroke counter (Z)• central table bore (TB)
MANUAL TOGGLE PRESSES
Baltec manual toggle presses with square rams areideal equipment for the production of high-precisionsmall components with narrow tolerances in smalland medium batches, where automation would beuneconomical.
ERGOPRESS® hand lever
• Ergonomic user comfort.• 360° stepless adjustment• Lever angled to the side: free view of work area and ergonomically comfortable position.
• Simple and easy conversion for left-handers (except HS and Z option) without losing the tool setting. Ideal for job sharing on one press.
9
VK 750-40 L-VK 1200
MANUAL TOGGLE PRESSES
Manual toggle presses with square ramVK series / L-VK series
A
B
B
C x D
E
E
F
C x G
Capacity
Working stroke
Throat
Daylight
Daylight with DP
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø x Depth with DP
Ram area
Space requirement
Stand height
Weight
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
Type VK 750-40
7.5
40
80
53-265
38-250
157x115
12
10H7x25
10H7x25
25x25
157x237
450
ca. 20
L-VK 750-40
7.5
40
80
55-375
39-359
157x115
12
10H7x25
10H7x25
25x25
155x280
570
ca. 28
VK 1200-60
12.0
60
80
45-245
31-231
157x115
12
10H7x30
10H7x25
31x31
157x237
450
ca. 24
L-VK 1200-60
12.0
60
80
52-352
38-338
157x115
12
10H7x30
10H7x25
31x31
157x280
570
ca. 32
DP
HS
Z
TB
Precision ram adjustment
Return travel lock
Counter
Table bore 12H7
DP
HS
Z
TB
DP
HS
Z
TB
DP
HS
Z
TB
VK 500-40
5.0
40
63
40-213
20-197
110x65
10
10H7x25
10H7x25
21x21
110x164
355
ca. 10
Accessories (See page 3) Please specify when ordering
DP
HS
Z
TB
10
Manual toggle presses with square ramVK series / XL-VK series / PHK series
The extra powerful hand-operated toggle presses of theVK range are especially suitable for the frequentlychanging applications in model making and in theworkshop. Their high forces of up to 30 kN enable themto be flexibly used for widely differing applications.
The advantages:• Choice of different stroke lengths• Extra stable press base design• Daylight easily adjustable by means of the standard press head threaded spindleheight adjustment
• The nominal force of the press can be achieved with moderate applied force
XL-VK series range with 250 mm throatA larger throat is required wherever bulky parts areprocessed, e.g. the processing of printed circuit boards,sheet metal and similar parts. Baltec XL presses with 250mm throat are employed in such cases. The base is astable welded structure to which different standard pressheads can be fitted.
MANUAL TOGGLE PRESSES
Manual toggle presses with square ramVK series / XL-VK series / PHK series
XL-VK 1500-40
11
MANUAL TOGGLE PRESSES
VK 1500 TB
ORDER EXAMPLE
40
Model Stroke Options
VK 2500-60
DP
HS
Z
TB
DP
HS
Z
TB
VK 2500-60
25.0
60
100
-
65-295
44-274
-
185x145
12
10H7x30
10H7x25
31 X 31
185x320
520
ca.63
VK 3000-30
30.0
30
100
-
65-285
44-274
-
185x145
12
10H7x30
10H7x25
31 X 31
185x320
520
ca.63
VK 2500-40
25.0
40
100
-
60-290
46-274
-
185x145
12
10H7x30
10H7x25
31 X 31
185x320
520
ca.58
XL-VK 1500-40
15.0
40
250
100
80-166
72-150
100
200x200
12
10H7x30
10H7x25
31 X 31
200x465
465
ca.55
XL-VK 1500-60
15.0
60
250
100
88-166
72-150
100
200x200
12
10H7x30
10H7x25
31 X 31
200x465
465
ca.59
VK 1500-60
15.0
60
100
-
49-168
35-154
-
175x140
12
10H7x30
10H7x25
31 X 31
175x300
425
ca.43
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
A
H
B
B
BB
CxD
E
E
F
C x G
K
Capacity
Working stroke
Throat
Throat C-frame
Daylight
Daylight with DP
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø x Depth with DP
Ram area
Space requirement
Stand height
Weight
Type
DP
HS
Z
TB
Precision ram adjustment
Return travel lock
Counter
Table bore 12H7
Accessories (See page 3) Please specify when ordering
DP
HS
Z
TB
DP
HS
Z
TB
VK 1500-40
15.0
40
100
-
49-168
35-154
-
175x140
12
10H7x30
10H7x25
31 X 31
175x300
425
ca.39
DP
HS
Z
TB
DP
HS
Z
TB
VK 1500-40
12
Rack-and-pinion presses with round ram APZ SeriesL-APZ Series with extra large daylight
Baltec rack-and-pinion presses transmit their pressingforce constantly over the entire length of the stroke.Direct power transmission via the hand lever permitsextreme precision in the pressing operation.
The improved transmission ratio enables a highercompression force to be achieved for the same force applied.
The following quality features are characteristic of all Baltec rack-and-pinion presses:• anti-twist ram • infinitely adjustable stroke length:Standard: via setting screwMICRO: via micrometer screw
• height adjustment of the press head using a threaded spindle
• 360° infinitely adjustable hand lever• adjustable return stroke power
Rack-and-pinion presses are therefore ideal for:• pressing-in longer components• jointing operations over long strokes
MANUAL PRESSES
13
MANUAL PRESSES
APZT1
APZ T 1-40 APZ T 2-50
ORDER EXAMPLE
40 HS-TB
Model Stroke Options
L APZ T 2-50
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
APZ T2-100
2.5
100
80
55-390
157x115
12
10H7x25
25
155x237
450
ca.21
L-APZ T2-50
2.5
50
80
55-390
157x115
12
10H7x25
25
155x280
570
ca.29
APZ T2-50
2.5
50
80
42-290
157x115
12
10H7x25
25
157x237
450
ca.21
L-APZ T2-50
2.5
100
80
55-390
157x115
12
10H7x25
25
155x280
570
ca.29
APZ T1-90
1.5
90
63
40-235
110x65
10
10H7x25
25
110x164
355
ca.8.5
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
A
B
CxD
E
F
C x G
K
Capacity
Working stroke
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Space requirement
Stand height
Weight
Type
Return travel lock
Mikrometer
Counter
Table bore 12H7
Left/right-hander version*
*Can only be combined with MICRO and Z accessories.
Accessories (See page 3) Please specify when ordering
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
APZ T1-40
1.5
40
63
40-235
110x65
10
10H7x25
25
110x164
355
ca.8.5
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
Rack-and-pinion presses with round ram APZ SeriesL-APZ Series with extra large daylight
14
Rack-and-pinion presses with square ramVZ SeriesL-VZ Series with extra large daylight
The square ram has significant advantages over the round ram:• absolute torsion resistance• play-free movement of the press ram• adjustable gib strips of the square ram• large support surface for the tool• guides on the tool are therefore usually unnecessary• virtually maintenance-free operation
Additional standard equipment:• height adjustment of the press head using a threaded spindle
• side-located measuring strip for repeatable accurate setting of press head
• these models can also be fitted with the usual options
Baltec rack-and pinion presses with square rams are idealequipment for the production of high-precision smallcomponents with narrow tolerances in small and mediumbatches, where automation would be uneconomical.
MANUAL PRESSES
15
MANUAL PRESSES
VZ 150-40 with MICRO accessory
L-VZ 250-50
ORDER EXAMPLE
VZ 150 40 Z-TB
Model Stroke Options
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
VZ 250-100
2.5
100
80
42-290
157x115
12
10H7x25
20X20
157x237
450
ca.21
L-VZ 250-50
2.5
50
80
55-390
157x115
12
10H7x25
20X20
155x280
570
ca.29
VZ 250-50
2.5
50
80
42-290
157x115
12
10H7x25
20X20
157x237
450
ca.21
L-VZ 250-100
2.5
100
80
55-390
157x115
12
10H7x25
20X20
155x280
570
ca.29
VZ 150-90
1.5
90
63
35-235
110x65
10
10H7x25
20X20
110x164
355
ca.8.5
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
A
B
CxD
E
F
C x G
K
Capacity
Working stroke
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram area
Space requirement
Stand height
Weight
Type
Return travel lock
Mikrometer
Counter
Table bore 12H7
Left/right-hander version*
*Can only be combined with MICRO and Z accessories.
Accessories (See page 3) Please specify when ordering
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
VZ 150-40
1.5
40
63
35-235
110x65
10
10H7x25
20X20
110x164
355
ca.8.5
HS
MICRO
Z
TB
R/L
HS
MICRO
Z
TB
R/L
Rack-and-pinion presses with square ramVZ SeriesL-VZ Series with extra large daylight
16
Model
Capacity
Working stroke
Power stroke
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x depth
Ram cross-section
Port size
Air consumption/mm cyl. stroke
Space requirement
Weight
kN
lbs
mm
mm
mm
mm
mm
mm
mm
mm
SCF
mm
lbs
NP 4000
40
9000
40
0 - 6
130
58 - 325
200 x 190
14
20H7x 25
40 x 40
R 3/8”
0.026
200 x 385
212
NP 2000
20
4500
40
0 - 6
130
58 - 325
200 x 190
14
20H7x 25
40 x 40
R 3/8”
0.018
200 x 385
210
XL-NP 4000
40
9000
40
0 - 6
300
125 - 265
200 x 220
14
20H7x 25
40 x 40
R 3/8”
0.026
200 x 550
300
XL-NP 2000
20
4500
40
0 - 6
300
125 - 265
200 x 220
14
20H7x 25
40 x 40
R 3/8”
0.018
200 x 550
300
A
B
C x D
E
F
C x G
Manually assisted pneumatic toggle presses are used when, due tothe special nature of the workpiece, it is not initially possible touse both hands for two-handed operations and yet a largecompression force is required at the end of the working stroke.
With NP manually assisted pneumatic toggle presses, safeworking is possible in these circumstances: the ram is brought tothe pressure position of the stroke using the hand lever and theworkpiece is then held by the force of this lever. A sensorregisters this position. At the same time, the workpiece can bereleased and a button pushed using the other hand, which theninitiates the power stroke.
The power stroke can only be initiated when both hands areoccupied. So, if the hand lever is released, the ram is raised by asafety mechanism and the enable signal for the power stroke inthe control system is removed.
40 38 36 34 32 30 28 26 22 20 18 16 14 12 10 8 6
10
15
20
25
30
35
40
45
5
0
4 2 0
NP
NP
mm before BDC
Force in kN
24
The length of the power stroke in NP manually assistedpneumatic toggle presses and hence the BDC position canbe set with high accuracy using the standard precisionadjustment facility. Thanks to the specially designedtransmission mechanism, a uniform pressure is availableover the whole length of the selected stroke.
DIRECT-ACTING PNEUMATIC PRESSES
DA series
XL-NP 4000
17
DIRECT-ACTING PNEUMATIC PRESSES
DA series
DA presses are the logical implementation of modernpress technology for direct-acting pneumatic presses.Due to their modular design, exactly the size neededfor the application can be selected, thus optimizing theprice/performance ratio.
Standard stroke lengths from 40 mm to 120 mm areavailable in 20 mm steps. Special lengths can beprovided on request.
Direct-acting pneumatic presses produce a constantforce over the whole stroke length. All direct-actingpneumatic presses can be provided as automationcomponents or with Baltec IPC controllers for individualworkstations.
The processing of sheet metal, printed circuit boardsand other bulky components requires presses to have alarger throat. XL-DA presses with 250 mm and 300 mmthroat enable even these workpieces to be processed.L-DA presses with up to 350 mm daylight are used fortall parts which require more vertical space. Fordimensions which lie outside the standard, presses withpressframes in welded design can be manufactured toyour specifications.
DA presses are practically maintenance-free, as allmoving parts are mounted in bearings. Cylinders arepregreased and are therefore suitable for oil-freeoperation.
Other quality features:• Factory pre-set pressure point• Right-angled gearbox for simple height adjustment of the press head
• Side-mounted measuring strip for fast reproduction ofsettings when changing the tool
• Practically maintenance-free double-acting cylinder• Low noise: less than 75 dB
18
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ramL-DA series with round ram, daylightwith 350 mm
Adjusting the stroke of DA pressesDA presses are fitted as standard with an innovative,precise and easy-to-use system which enables accuratestroke adjustment and protects the ram againsttwisting.
Operation:• The press depth can be adjusted to a reading
accuracy of 0.05 mm over the whole stroke length with only one scale nut (A). The stroke length can be read off using the side scale (B) and the vernier on the scale nut (A).
• The position of the ram can be checked by means of reed contacts (C) which are slid onto the standard scale.
• The sensors do not have to be readjusted when the stroke length is changed, as the stroke length control magnets always move to the sameend positions.
Tandem cylindersThe energy-efficient tandem cylinder design is usedfor larger forces. Several pneumatic cylinders areconnected in tandem thus increasing the force of thecylinder accordingly. The air consumption isoptimized, as the return stroke is only via one cylinderchamber. The press can be operated using only twoair connections, as the air is channelled within thepneumatic cylinder.
Sensors are not included
19
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ramL-DA series with round ram, daylight with 350 mm
DA 150-80-63 DA 250-80-80
DA 450-*-80
4.5
40/60/80/100/120
80
58-243
157x115
12
20H7x25
40
G 3/8”
1.0
155x237
450
ca. 28
L-DA 450-*-80
4.5
40/60/80/100/120
80
65-350
157x115
12
20H7x25
40
G 3/8”
1.0
155x280
570
ca. 34
L-DA 250-80-80
2.5
80
80
65-390
157x115
12
20H7x25
40
G 1/4”
0.3
155x280
570
ca. 31
DA 850-*-80
8.5
40/60/80/100/120
80
58-243
157x115
12
20H7x25
40
G 3/8”
1.5
155x237
450
ca. 31
L-DA 850-*-80
8.5
40/60/80/100/120
80
65-350
157x115
12
20H7x25
40
G 3/8”
1.5
155x280
570
ca. 37
DA 250-80-80
2.5
80
80
70-280
157x115
12
20H7x25
40
G 1/4”
0.3
157x237
450
ca. 25
kN
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
A
B
CxD
E
F
C x G
K
Capacity
Working stroke*
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port Size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
Type DA 150-80-63
1.5
80
63
40-215
100x65
10
16H7x25
30
G 1/4”
0.2
110x164
355
ca. 11.5
DA 850-*-80
8.5
40/60/80/100/120
80
58-243
157x115
12
20H7x25
40
G 3/8”
1.5
155x237
450
ca. 31
TB TBTB TB TBTBTable bore 12H7
*Specify the stroke length when ordering.Valve and service unit only included with controller. Design may vary.
Accessories (see Page 3) Please specify when ordering
TB TB
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ram
20
21
DA 1300-*-100
13.0
40/60/80/100/120
100
60-285
185x145
12
20H7x25
40
G 3/8”
2.1
185x320
520
ca.68
DA 1300-*-130
13.0
40/60/80/100/120
130
70-325
200x190
14
20H7x25
40
G 3/8”
2.1
200x385
580
ca.83
DA 850-*-100
8.5
40/60/80/100/120
100
60-285
185x145
12
20H7x25
40
G 3/8”
1.5
185x320
520
ca.65
kN
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
Capacity
Working stroke
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
*Specify the stroke length when ordering.Valve and service unit only included with controller. Design may vary.
Type DA 450-*-100
4.5
40/60/80/100/120
100
60-285
85x145
12
20H7x25
40
G 3/8”
1.0
185x320
520
ca.62
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ram
DA 850-40-100 DA 1300-40-130
DA 1700-*-100
17.0
40/60/80/100/120
100
60-285
185x145
12
20H7x25
40
G 3/8”
2.6
185x320
520
ca.71
DA 1300-*-130
13.0
40/60/80/100/120
130
70-325
200x190
14
20H7x25
40
G 3/8”
2.1
200x385
580
ca.83
DA 850-*-130
8.5
40/60/80/100/120
130
70-325
200x190
14
20H7x25
40
G 3/8”
1.5
200x385
580
ca.80
DA 450-*-130
4.5
40/60/80/100/120
130
70-325
200x220
14
20H7x25
40
G 3/8”
1.0
200x385
580
ca.77
A
B
BB
CxD
E
F
C x G
K
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ram
22
DA 2800-*-130
28.0
40/60/80/100/120
130
75-330
200x190
14
20H7x25
40
G 3/8”
3.7
200x385
580
ca.99
kN
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
A
B
CxD
E
F
C x G
K
Capacity
Working stroke*
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
*Specify the stroke length when ordering.Valve and service unit only included with controller. Design may vary.
Type DA 2100-*-130
21.0
40/60/80/100/120
130
75-330
200x190
14
20H7x25
40
G 3/8”
3.0
200x385
580
ca.92 23
DIRECT-ACTING PNEUMATIC PRESSES
DA series with round ram
DA 3400-40-130
DA 3400-*-130
34.0
40/60/80/100/120
130
75-330
200x190
14
20H7x25
40
G 3/8”
4.5
200x385
580
ca.105
DIRECT-ACTING PNEUMATIC PRESSES
XL-DA series with round ram, 250 mm throat
24
A
H
B
BB
C x D
E
F
C x G
K
Capacity
Working stroke*
Throat
Throat C-frame
Daylight
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
*Specify the stroke length when ordering.Valve and service unit only included with controller. Design may vary.
DIRECT-ACTING PNEUMATIC PRESSES
XL-DA series with round ram, 250 mm throat
25
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
Type XL-DA 850-*-250
8.5
40/60/80/100/120
100
250
75-175
100
200x200
12
20H7x25
40
G3/8”
1.5
200x465
465
ca. 60
XL-DA 1300-*-250
13.0
40/60/80/100/120
100
250
75-175
100
200x200
12
20H7x25
40
G3/8”
2.0
200x465
465
ca. 63
XL-DA 1700-*-250
17.0
40/60/80/100/120
100
250
75-175
100
200x200
12
20H7x25
40
G3/8”
1.0
200x465
465
ca. 66
XL-DA 450-*-250
4.5
40/60/80/100/120
100
250
75-175
100
200x200
12
20H7x25
40
G3/8”
1.0
200x465
465
ca. 57
XL-DA 850-40
DIRECT-ACTING PNEUMATIC PRESSES
XL-DA series with round ram 300 mm throat
26
DIRECT-ACTING PNEUMATIC PRESSES
XL-DA series with round ram 300 mm throat
27
XL-DA 1700-*-300
17.0
40/60/80/120
130
300
140-175
158
220x220
14
20H7x25
40
G3/8”
2.6
200X560
630
ca.141
XL-DA 2100-*-300
21.0
40/60/80/120
130
300
130-275
158
220x220
14
20H7x25
40
G3/8”
3,0
200X560
630
ca.141
XL-DA 1300-*-300
13.0
40/60/80/120
130
300
140-175
158
220x220
14
20H7x25
40
G3/8”
2.1
200X560
630
ca.141
XL-DA 2100-*-300
28.0
40/60/80/120
130
300
130-275
158
220x220
14
20H7x25
40
G3/8”
3.7
200X560
630
ca.158
XL-DA 3400-*-300
34.0
40/60/80/120
130
300
130-275
158
220x220
14
20H7x25
40
G3/8”
4.5
200X560
630
ca.164
XL-DA 850-*-300
8.5
40/60/80/120
130
300
140-175
158
220x220
14
20H7x25
40
G3/8”
1.5
200X560
630
ca.138
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
A
H
B
BB
CxD
E
F
C x G
K
Capacity
Working stroke*
Throat
Throat C-frame
Daylight
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port Size
Air consumption/cm cyl stroke
Space requirement
Stand height
Weight
*Specify the stroke length when ordering.Valve and service unit only included with controller. Design may vary.
Type XL-DA 450-*-300
4.5
40/60/80/120
130
300
140-175
158
220x220
14
20H7x25
40
G3/8”
1.0
200X560
630
ca.135
XL-DA 1300-40-300 XL-DA 3400-40-300
0 kN
5 kN
10 kN
15 kN
20 kN
25 kN
30 kN
35 kN
40 kN
0 ba r 1 ba r 2 ba r 3 ba r 4 ba r 5 ba r 6 ba r
DAF 450DAF 850DAF 130 0DAF 170 0DAF 210 0DAF 280 0DAF 340 0
E
A
B
B
Ø 40
22C
42,4
4
24,5
49
6xM10
Ø 70f7
10
25
M8
Ø 20H 7
E
PNEUMATIC PRESSES
28
DAF direct-acting press cylinders
DAF direct-acting press cylinders with flangehave been designed for flexible use in specialmachines. DAF press cylinders come with allthe advantages of modern pneumatic pressesas standard:
• Unlimited adjustment of stroke length• Adjustable end-position damping• Tool mounting hole• Easy to automate
DAF 450-40 4.5 4 0 - 40 363 112 32DAF 450-60 4.5 4 0 - 60 403 112 32DAF 450-80 4.5 4 0 - 80 443 112 32DAF 450-100 4.5 4 0 - 100 483 112 32DAF 450-120 4.5 4 0 - 120 523 112 32DAF 850-40 8.5 4 0 - 40 449 112 32DAF 850-60 8.5 4 0 - 60 509 112 32DAF 850-80 8.5 4 0 - 80 569 112 32DAF 850-100 8.5 4 0 - 100 629 112 32DAF 850-120 8.5 4 0 - 120 689 112 32DAF 1300-40 13 4 0 - 40 535 112 32DAF 1300-60 13 4 0 - 60 615 112 32DAF 1300-80 13 4 0 - 80 695 112 32DAF 1300-100 13 4 0 - 100 775 112 32DAF 1300-120 13 4 0 - 120 855 112 32DAF 1700-40 17 4 0 - 40 621 112 32DAF 1700-60 17 4 0 - 60 721 112 32DAF 1700-80 17 4 0 - 80 821 112 32DAF 1700-100 17 4 0 - 100 921 112 32DAF 1700-120 17 4 0 - 120 1021 112 32DAF 2100-40 21 19 0 - 40 581 134 38DAF 2100-60 21 19 0 - 60 661 134 38DAF 2100-80 21 19 0 - 80 741 134 38DAF 2100-100 21 19 0 - 100 821 134 38DAF 2100-120 21 19 0 - 120 901 134 38DAF 2800-40 28 26 0 - 40 689 134 38DAF 2800-60 28 26 0 - 60 789 134 38DAF 2800-80 28 26 0 - 80 889 134 38DAF 2800-100 28 26 0 - 100 989 134 38DAF 2800-120 28 26 0 - 120 1089 134 38DAF 3400-40 34 32 0 - 40 797 134 38DAF 3400-60 34 32 0 - 60 917 134 38DAF 3400-80 34 32 0 - 80 1037 134 38DAF 3400-100 34 32 0 - 100 1157 134 38DAF 3400-120 34 32 0 - 120 1277 134 38
Type CapacitykN at 6 bar
Return forcekN at 6 bar
strokemm
A mm
Bmm
Cmm
PNEUMATIC PRESSES
DAF direct-acting press cylinders
29
DAF cylinders
PRECISION PNEUMATIC PRESS
MicroPress® with square ram
MicroPress® is a pneumatic press forsmaller capacities with a robust press base.MicroPress® types are ideal for joining andshaping applications where componentsrequire low pressure and precise strokedepth. Examples are applications in medicalengineering, electronics manufacturing andprecision mechanics.
Quality features:• Square ram• Precision ram guide• Adjustable stroke length• Height-adjustable press head• Practically maintenance-free cylinder• Low noise
30
PRECISION PNEUMATIC PRESS
MicroPress® with square ram
31
MicroPress® 190-60-63
120-60-63
120
5-60
63
43-208
100x65
10
10H7x25
21X21
M5
0.16
110x164
355
ca. 11
190-60-63
190
5-60
63
43-208
100x65
10
10H7x25
21X21
G 1/8”
0.24
110x164
355
ca. 11
70-60-63
70
5-60
63
43-208
100x65
10
10H7x25
21X21
M5
0.08
110x164
355
ca. 10
290-60-63
290
5-60
63
43-208
100x65
10
10H7x25
21X21
G 1/8”
0.38
110x164
355
ca. 12
480-60-63
480
5-60
63
43-208
100x65
10
10H7x25
21X21
G 1/8”
0.64
110x164
355
ca. 12
40-60-63
40
5-60
63
43-208
100x65
10
10H7x25
21X21
M5
0.06
110x164
355
ca. 10
N
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
A
B
CxD
E
F
C x G
K
Type 30-60-63
30
5-60
63
43-208
100x65
10
10H7x25
21X21
M5
0.04
110x164
355
ca. 9.5
TB TBTB TB TBTBTable bore 12H7Accessories (see Page 3) Please specify when ordering
TB TB
750-60-63
750
5-60
63
43-208
100x65
10
10H7x25
21X21
G 1/4”
1.0
110x164
355
ca. 12
Capacity
Working stroke
Throat
Daylight
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram area
Port Size
Air consumption/60mm cyl. stroke
Space requirement
Stand height
Weight
32
The optimum transmission ratio of the toggle leverproduces large forces at the end of the stroke andensures low air consumption. The resulting low energyconsumption means that Baltec pneumatic togglepresses are a cost-effective production tool, not only atthe procurement stage but also in the long term.All pneumatic toggle presses can be provided with thestandard Baltec IPC controller or with customer-specifiedcontrollers.
Other quality features:• Factory pre-set pressure point• Right-angled gearbox for simple height adjustment of the press head
• Side-mounted measuring strip for fast reproduction ofsettings when changing the tool
• Practically maintenance-free double-acting cylinder• Low noise: less than 75 dB
PNEUMATIC TOGGLE PRESSES
APKL and VKL series
33
PNEUMATIC TOGGLE PRESSES
APKL and VKL series
A
B
B
C x D
E
F
C x G
K
Capacity
Working stroke
Throat
Daylight
Daylight with DP
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram area
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
kN
mm
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
Type VKL 1000-40-100
10
40
100
110-280
-
185-145
12
12H7x30
31x31
G 1/4”
0.41
185x320
520
ca. 55
with square ramVKL 2400-40-130
24
40
130
175-330
-
200x190
14
12H7x30
31x31
G 3/8”
1.05
200x385
580
ca. 95
VKL 3200-40-130
32
40
130
175-330
-
200x190
14
12H7x30
31x31
G 3/8”
1.05
200x385
580
ca. 96
VKL 6000-40-150
60
40
150
90-320
-
300x210
14
20H7x34
41x41
G 3/8”
1.65
300x455
630
ca. 140
DPPrecision ram adjustment
Accessories (See page 16) Please specify when ordering
DP - - -
VKL 0500-35-80
5
35
80
80-265
65-250
157-115
12
10H7x25
25x25
G 1/4”
0.26
157x237
450
ca. 22
A
B
B
C x D
E
F
C x G
K
Capacity
Working stroke
Throat
Daylight
Daylight with DP
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
kN
mm
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
Type APK3L
10
40
100
110-280
-
185-145
12
12H7x30
30
G 1/4”
0.41
185x320
520
ca. 55
with round ramAPK4L
24
40
130
175-330
-
200x190
14
12H7x30
30
G 3/8”
1.05
200x385
580
ca. 95
APK5L
32
40
130
175-330
-
200x190
14
12H7x30
30
G 3/8”
1.05
200x385
580
ca. 95
APK6L
60
40
150
87-310
-
300x210
14
20H7x34
40
G 3/8”
1.65
300x455
630
ca. 140
DPPrecision ram adjustment
Accessories (See page 16) Please specify when ordering
DP - - -
APK2L
5
35
80
80-265
65-250
157-115
12
10H7x25
24
G 1/4”
0.26
157x237
450
ca. 22
APK 2L APK 6L VKL 2400
34
PNEUMATIC TOGGLE PRESSES
XL-APK L and XL-VKL series
Presses with XL throat are designed for processing largeand bulky parts. The press stand consists of a stablewelded structure which can be modified to suitcustomers‘ requirements. XL pneumatic toggle pressescan be provided with the standard Baltec IPC controlleror with customer specified controllers.
Other quality features:• Factory pre-set pressure point• Right-angled gearbox for simple height adjustment of the press head
• Side-mounted measuring strip for fast reproduction ofsettings when changing the tool
• Practically maintenance-free double-acting cylinder• Low noise: less than 75 dB
35
XL-VKL 2400-40-300
24
40
130
300
130-280
158
200x220
14
12H7x30
30
G 3/8”
1.05
200x560
630
ca.149
XL-VKL 3200-40-300
32
40
130
300
130-280
158
200x220
14
12H7x30
30
G 3/8”
1.05
200x560
630
ca.150
XL-APK 6 L
60
40
150
300
130-230
190
310x220
16
20H7x34
40
G 3/8”
1.65
320x610
630
ca.250
XL-VKL 6000-40-300
60
40
150
300
130-230
190
310x220
16
20H7x34
40
G 3/8”
1.65
320x610
630
ca.250
XL-APK 5 L
32
40
130
300
130-280
158
200x220
14
12H7x30
30
G 3/8”
1.05
200x560
630
ca.150
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
l
mm
mm
kg
A
H
B
BB
CxD
E
F
C x G
K
Capacity
Working stroke
Throat
Throat C-frame
Daylight
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram bore Ø x Ram area
Port size
Air consumption/cm cyl. stroke
Space requirement
Stand height
Weight
Type XL-APK 4 L
24
40
130
300
130-280
158
200x220
14
12H7x30
30
G 3/8”
1.05
200x560
630
ca.149
XL-APK 4L
with round ram with square ram
PNEUMATIC TOGGLE PRESSES
XL-APK L and XL-VKL series
HYDROPNEUMATIC PRESSES HP
Baltec hydropneumatic presses are initially driven bycompressed air only and activate the hydraulic powerstroke automatically. They combine the advantages ofpneumatic and hydraulic presses. In the pneumaticallydriven fast stroke, the workpiece is approached rapidlywith low force. The hydraulic power stroke is thenactivated automatically when resistance is encountered.
Because of this, the applied energy is used to the mosteconomic effect particularly in these models. Theoperation of hydropneumatic presses is described on thefollowing page. As Baltec hydropneumatic presses donot need a hydraulic power pack, they can also be usedwhere space is at a premium. All hydropneumaticpresses can be provided with the standard Baltec IPCcontroller or with customer specified controllers.
The processing of sheet metal, printed circuit boards andother bulky components requires presses to have alarger throat. XL-HP presses with 300 mm throat enableeven these parts to be processed. For dimensions whichlie outside the standard, presses with stands in weldeddesign can be manufactured to your specifications.
Quality features:• Anti-twist, hardened ram• Long, honed ram guide for maximum precision• Two power stroke lengths provided as standard• Simple adjustment of the height of the press head using a threaded spindle and right-angle gearbox
• Side-mounted measuring strip for fast reproduction ofsettings when changing the tool
• Low noise: less than 75 dB
36
HYDROPNEUMATIC PRESSES HP
Description of operation:
Starting position:Compressed air is applied to the compressed air line (1);the rest of the system is unpressurized.
Fast stroke (A):Pressure is applied to the fast stroke piston (2) via thecompressed air connection (3). The piston moves out andpushes the power stroke piston (4) down by means of theoil at high speed onto the workpiece.
Power stroke (B):The changeover unit (5) now switches overautomatically; the plunger (6) is pressurized withcompressed air, moves out and closes the oil chambercausing the power transmission to take place. The ram(4) moves out at reduced speed and with increasedforce in the power stroke.
Return stroke (C):System reversal; all pistons return simultaneouslywith pneumatic force. 37
HYDROPNEUMATIC PRESSES
HP seriesXL-HP series with 300 mm throat
38
PNEUMATIC PRESSES
HP seriesXL-HP series with 300 mm throat
39
HP 10000 HV XL-HP 30000 HV
Capacity
Porer stroke
thereof power stroke*
Capacity of rapid stroke 6 bar
Capacity of return stroke bei bar
Throat
Throat C-frame
Daylight
Daylight C-frame
Table size
T-slot width similar to DIN 650
Ram bore Ø x Depth
Ram Ø
Port Size
Space requirement
Stand height
Weight
Type
A
H
B
BB
CxD
E
F
L x G
K
kN
mm
mm
kN
kN
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
HP 3.000 HV
30
40
4/6
1.5
1.3
130
-
123-322
-
200x190
14
16H7x30
35
G 1/4”
200x385
580
ca.78
HP 5.000 HV
50
50
5/10
2.5
1.7
150
-
119-320
-
300x210
14
20H7x34
40
G 1/4”
300x455
630
ca.163
HP 10.000 HV
100
50
5/10
4.5
4.1
150
-
117-312
-
310x220
14
20H7x34
40
G 1/4”
310x500
650
ca.287
XL-HP 3.000 HV
30
40
4/8
1.5
1.3
130
300
189-327
158
220x220
14
16H7x30
35
G 1/4”
200x560
630
ca.184
XL-HP 5.000 HV
50
50
5/10
2.5
1.7
150
300
145-235
190
310x220
16
20H7x34
40
G 1/4”
320x610
630
ca.241
XL-HP 10.000 HV
100
50
5/10
4.5
4.1
150
300
145-235
190
310x220
16
20H7x34
40
G 1/4”
320x610
630
ca.311
40
PRESS CONTROL SYSTEMS
FOR PNEUMATIC AND HYDROPNEUMATIC PRESSES
STANDARD VALVEPACKAGEFeatures include:• Lockable dump valve• ISO Valve 24 VA
BALTEC PPCPNEUMATIC CONTROLFeatures include:• Two hand anti-tie-down control• low cost pneumatic control• Standard valve package
BALTEC IPC 2000ELECTRIC CONTROLFeatures include:• two-hand anti-tie-down-control• Lockable counter• Lockable dwell timer• Pressure switch mode to retract ram based on force applied to part
• E-stop• 1 X 120 VAC• Standard valve package
PPC AND IPC-2000
PNEUMATIC SLIDE TABLE
HST-150
Baltec HST-150 slide tables simplify the manual and automatic insertion tasks, thus increasing the cost-effectiveness of the assembly process.
The advantages:• Part loading takes place outside the press area• Pre-assembly of parts is possible without being impeded by the press
• Versatile application possibilities for automation tasks• Precise positioning of workpieces• Easily automated
Type
Stroke
Load capacity
Mounting Capacity
HST 100
100
12,000
120 x 120
HST-150
200
12,000
120 x 120
41
HST-100-P
mm
lbs
mm
Options
End position damping stop
Pneumatic slide
Pneumatic slide with pneumatic catch lock
RB
P
PR
RB
P
PR
Please indicate with order
TPC-MIDI PROCESS MONITORING
Applications:Joining and assembly processes using presses musttoday be carried out safely and if possible withoutretrospective checking. Specified parameters whichdefine the press process must be maintained duringproduction. Only in this way can the quality and safetyof the manufactured product be guaranteed. For thisreason, TPC-MIDI is used wherever consistent joiningprocesses are required, the progress of which has to bechecked and if applicable documented by meansof software.
TPC-MIDI monitors the press operation, compares theactual progress with the requirements and subsequentlyevaluates it. In this way, reject parts can be reliablydetected and separated out.
TPC-MIDI can be used both with hand-operated pressesand with pneumatic presses. In the case of pneumaticpresses, the MPS-1 TPC controller is supplied togetherwith a PLC onto which the type-tested two-hand MPS-1safety controller is superimposed.
However, the TPC-MIDI is also available as a pure systemcomponent if a PLC environment already exists, e.g. inan automation system.
Quality features:• TPC-MIDI can be programmed via the membranekeyboard or conveniently using the PC software.
• TPC-MIDI stores 8 different measuring programs• 3 windows possible per program• Modern curve evaluation via freelyparameterisable windows
• 4 window types: Insertion, pass-through and blockwindows as well as an envelope curve.
• Force measurement directly in theforce characteristic with DMS sensordeveloped especially for presses.
• Software for programming andsaving measuring programs
• Documentation of eachpress operation
42
43
TPC-MIDI PROCESS MONITORING
Monitoring window
The following monitoring windows can be created withTPC-MIDI:
Pass-through window (1)
The force/displacement curve must pass through thewindow from the entry to the exit side as definedwithout one of the other window boundaries beinginfringed. The entry and exit sides can be freely selected.
Envelope curve (2)
The measuring curve must pass continuouslythrough the envelope curve and must not infringeit. The envelope curve is taught by means of ateach-in process. Its X-axis parameters and the delta-Y, i.e. the force tolerance range, are definedsubsequently.
Block window (3)
The block window monitors the final values of thepress operation. With this type of window, theforce/displacement curve must enter the specifiedentry side and must not leave the window again.
Programmable trigger points can be defined if thepart geometry demands it. By programming thetrigger point, the X-axis positions of the evaluationwindow are matched to the press operation and thenrefer to the trigger zero point.
Notes
Notes
BalTec Corporation130 Technology DriveCanonsburg, PA 15317Phone 724-873-5757Fax 724-873-5858www.baltecorporation.com
Subject to chan
ge • Printed in U
SA • Issue: Rev. 1 M
ay 201
1
Your representative:
Recommended