View
15
Download
0
Category
Preview:
Citation preview
PN 34063-A1PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Standard Kits..........................................................2-3Assembly .................................................................. 4Primary Components Corner Connector ................................................... 5 Straight Connector .................................................. 5 Top Light Bracket ..................................................... 5 Hang/Foot Assembly ............................................... 5 Center Foot ............................................................ 6 Vertical Brace Assembly ........................................... 6
Cross Brace Assembly ............................................. 7 Fabric Panel ........................................................... 7 Hang Corner .......................................................... 8 Anti-Rotation Connector ........................................... 8Internal Lighting Configurations for Standard Kits ............................... 9 1-Light Assemblies for Rectangles & Cubes ............... 10 2-Light & 3-Light Assemblies for Rectangles & Cubes .. 11 2-Light & 3-Light Assemblies Diamonds..................... 12
Table of Contents
Packing & Unpacking
5”
11.75”
4.5”
5”
11.75”
4.5”
Corner Connectors
1-Light Assembly 2-Light Assembly
PictureCube Extrusions
10”
12”
6”
3-Light Assembly
Six 46”Extrusions Max.
Save Boxesfor Repacking
Save Boxesfor Repacking
Save Boxfor Repacking
Save Boxesfor Repacking
8”
17.5”
4.5”
PN 34063-A2PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Standard Kits
46”
46”
46”
19”
46”
46”
46”
46”
46”
46”
46”
42”
42”
42”
42”
19”
42” 42”
42”
42” 42”
42”
42”42”
19”
19”
19”
42”
46”
46”
19”
46”
46” 46”
46”
46”
42”
42”
46”
42”
42”42”
42”42”
42”
42”
42”
42”
19”19” 19”
19”
23” x 23” x 92” 46” x 46” x 88” 46” x 46” x 92”
46” x 46” x 115” 46” x 46” x 138” 46” x 46” x 161” 46” x 46” x 184”
46” x 46” x 46” CUBE46” x 46” x 46” DIAMOND
69” x 69” x 69” CUBE
69” x 69” x 69” DIAMOND
PN 34063-A3PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
19” 19” 46”46”46”
42”42”
46”46”
46”
46”
46”
46”
46”
46”
42”
42”
42”42”
42”
42”42”
19”
115” x 22” x 92”
92” x 92” x 92”
92” x 92” x 46”
115” x 46” x 92”
Standard Kits (continued)
PN 34063-A4PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Assembly
CornerConnector
CornerConnector
Hang/Foot Assembly
Hang/Foot Assembly
StraightConnector
StraightConnector
StraightConnector
Center Foot
PictureCubeExtrusion
PictureCubeExtrusion
CornerConnector
Corner Connector
PictureCubeExtrusion
PictureCubeExtrusion
Vertical BraceAssembly
Cross BraceAssembly
PN 34063-A5PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Corner Connector
Straight Connector
Hang/Foot AssemblyFor Cube & Rectangle Kits Only.
Install as Foot
Install for Hanging
Top Light Bracket
Use with:CMH Lights (shown)• MR 16 Lights• 200W Halogen Lights• SkyTrak Lights•
1
1
2
3
4
2
3
side view (installed)
PN 34063-A6PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Vertical Brace AssemblySupplied with 115” x 23” x 92” and 115” x 46”’x 92” Kits Only.
Center FootSupplied with 115” x 23” x 92” and 115” x 46” x 92” Kits Only.
1
22
PictureCube to Truss 45° Connector
(qty 4)
PictureCube to Truss Connector Installation
PN 34063-A7PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Cross Brace AssemblySupplied with 46” x 46” x 161” and 46” x 46” x 184” Kits Only.
PictureCube to Truss
Connector Installation
1
2
2
PictureCube to Truss 90° Connector
(qty 4)
Fabric Panel
Pull Tab(use to remove panel)
1
22
3
4
4
Start at the upper corner 1. of the assembly by pressing the edge of the panel into the extrusion. Work the panel edge into the entire length of the upper extrusion.Work the panel edge 2. into each of the side extrusions about 1/3 the way down.Work the panel edge into 3. the entire length of the lower extrusion.Work the panel edge 4. into each of the side extrusions about the rest of the way down.Repeat for each side of 5. the PictureCube.
Fabric Panel
Fabric Panel
PictureCube Extrusion
PN 34063-A8PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Anti-Rotation Connector
Hang Corner ConnectorSupplied with Diamond Kits.
Supplied with Diamond Kits.
Cable(not supplied)
Tether(not supplied)
Remove Existing Screw
WARNING: DO NOT hang PictureCube assemblies from Anti-Rotation Connectors.Use Only Hang Plates and Hang Corner Connectors to hang Picture Cube Assemblies.
PN 34063-A9PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Internal Lighting
Multiple single bulb internal light assemblies may be strung together as shown.
x3x3
x3
x4
23” x 23” x 92” 46” x 46” x 88” 46” x 46” x 92” 46” x 46” x 115”
x5x6
x7
46” x 46” x 138” 46” x 46” x 161” 46” x 46” x 184”
x3x3x3
x3x3x3
115” x 23” x 92” 115” x 46” x 92”
x3
x3 x3
x3
92” x 92” x 92” Cube
1-Light Assemblies
92” x 92” x 46”
46” x 46” x 46” Cube 46” x 46” x 46” Diamond
2-Light Assemblies
69” x 69” x 69” Cube
69” x 69” x 69” Diamond
3-Light Assemblies
PN 34063-A10PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Internal Lighting - 1-Light Assemblies for Rectangles & Cubes
1
22
PictureCube to Truss 45° Connector
(qty 2)
Main Power Cord
8 lb. load max
PictureCube to Truss ConnectorInstallation (inverted view)
PN 34063-A11PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Internal Lighting - 2-Light & 3-Light Assemblies for Rectangles & Cubes
Use with 92” x 92” x 46” Rectangle &
46” x 46” x 46”Cube Kits Only.
Use with 69” x 69” x 69”Cube Kits Only.
OR
PictureCube to Truss 45° Connector
(qty 2)
For 69” x 69” x 69”Cube Kits Only:Use cable and
additional carabiner supplied here.
1
22
PictureCube to Truss ConnectorInstallation (inverted view)
Main Power Cord
PN 34063-A12PictureCube is a trademark of Skyline ExhibitsPatents Pending©2010 Skyline Exhibits
PictureCubeTM Exhibit System INSTRUCTIONS
Use with 46” x 46” x 46”Diamond Kits Only.
Use with 69” x 69” x 69”Diamond Kits Only.
Internal Lighting - 2-Light & 3-Light Assemblies for Diamonds
Main Power Cord
Recommended