View
233
Download
5
Category
Preview:
Citation preview
PiPe Hangers & Devices
TG/SD/5/M Web Rev. 3/09/15
PiPe Hangers & Devices
W. VA.
Plumbing & Mechanical
Electrical
Welcome to PHD manufacturing
PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial, sales and manufacturing backgrounds. The entrepreneurial vision of this close group used the talents they acquired over the years to forge something special in a business that needed a different purpose. This core group continues to manage PHD today, ensuring the original commitment to quality and excellence.
Our 33 professional sales representatives supporting the plumbing, mechanical and electrical industries are ready to serve your needs. Our manufacturing plant in Columbiana, Ohio, together with our 24 stocking warehouses throughout the United States, gives us one of the largest inventories in the industry.
Many of our products are Underwriter’s Laboratories listed and Factory Mutual approved. All PHD products are manufactured to meet or exceed industry standards set for their design and manufacture.
If you need a product not listed in this catalog, please call the factory or your local PHD representative to check availability and pricing.
PHD Plumbing & Mechanical Stock LocationsPHD Electrical Stock Locations
1
PiPe Hangers & Devices
2
tHreaDeD accessories
Fig. 37 Fig. 38 Fig. 40 Fig. 41 Fig. 43 Fig. 44 Fig. 45 Steel Eye Forged Steel Coach Screw Hex Head Bolt Flattened End Turnbuckle Lag Screw Socket Clevis Rod Lag Screw Adjuster
Fig. 020 Fig. 10 Fig. 15 Fig. 20 & 21 Fig. 25 Fig. 30 Fig. 35 Rod Swivel Threaded Machine Continuous Extension Piece Eye Socket Weldless Attachment Thread Rod Threaded Rod Eye Nut
Fig. 100, 104, & 105 Fig. 110 & 110H Fig. 130 Fig. 134 Fig. 135 Fig. 136 Rod Coupling Hex Nut Flat Washer Lock Washer Bevel Washer Fender Washer
Fig. 160Self Centering
Insulation Shield
Fig. 155Ring HangerWith Shield
Fig. 143, 152 & 154Copper Tubing Ring
HangerPVC Ring Hanger
Fig. 170Insulation
Shield
Fig. 180-183Band Hanger
Fig. 141 & 151Swivel Ring
Hanger
Fig. 47 Fig. 48 Fig. 50-55L Fig. 60 Fig. 70 Fig. 80 Fig. 90-95 Concrete Wood Drive Eye Rod J-Beam Bolt Anchor Bolt U-Hook U-Bolt Anchors Screw
roD couPlings, Hex nuts & WasHers
Hangers, sHielDs & insulation
Fig. 055Surge
Restraint
PiPe Hangers & Devices
Fig. 020 Fig. 10 Fig. 15 Fig. 20 & 21 Fig. 25 Fig. 30 Fig. 35 Rod Swivel Threaded Machine Continuous Extension Piece Eye Socket Weldless Attachment Thread Rod Threaded Rod Eye Nut
Fig. 100, 104, & 105 Fig. 110 & 110H Fig. 130 Fig. 134 Fig. 135 Fig. 136 Rod Coupling Hex Nut Flat Washer Lock Washer Bevel Washer Fender Washer
Fig. 460Pipe Roller
Chair
Fig. 480 & 480DAdjustable PipeRoller Support
Fig. 470 & 475Pipe Roller
Hanger
Fig. 485Short Pipe Roller
Fig. 483Adjustable PipeRoller Support
Fig. 486Pipe Roller Stand
Fig. 496Roller Socket
Fig. 495Long Pipe Roller
Fig. 487Adjustable Pipe Roller
Stand with Base
Fig. 490Pipe Roller
with Sockets
Fig. 450-454Standard
Clevis
Fig. 420A.W.W.A.
Clevis
Fig. 425Stainless Steel
Clevis
Fig. 430Insulated Pipe
Clevis
Fig. 455 & 456Clevis With
Secured Shield
Fig. 450V & 450TV-Bottom ClevisSupport Trough
Fig. 360Wide MouthBeam Clamp
Fig. 359Beam Clamp
Retaining Strap
Fig. 350Beam Clamp
Fig. 270Malleable C-Clamp
Fig. 259C-Clamp
Retaining Strap
Fig. 250 & 250-1Steel C-Clamp
Fig. 290Purlin Clamp
Fig. 440-442Lt. Duty Clevis
Copper Tubing Clevis
Beam clamPs
clevis Hangers
PiPe roller suPPorts
Fig. 508RHinged Extension
Split Clamp
Fig. 510RExtension Split
Clamp
Fig. 512 & 512HCopper Tubing Extension
Split Clamp
sPlit ring Hangers
3
Fig. 345Top Beam
Clamp
PiPe Hangers & Devices
4
Fig. 520 & 521Standard Pipe
Clamp
Fig. 522Heavy DutyPipe Clamp
Fig. 525Double BoltPipe Clamp
Fig. 526Heavy Duty Double
Bolt Pipe Clamp
Fig. 535Offset Pipe
Clamp
Fig. 545Extended Pipe
Clamp
PiPe clamPs
center loaD clamPs
J-Hooks, straPs & clamPs
PiPe saDDles, guiDes & sliDes
Fig. 625Steel Center Load
Beam Clamp
Fig. 630Malleable Center Load
Beam Clamp
Fig. 635Adjustable Steel
Beam Clamp
Fig. 610 & 620Steel Center Load
Beam Clamp
Fig. 656 & 658Pipe Saddle
Fig. 670-678Pipe Alignment Guide
Fig. 690Pipe Slide
Fig. 651 & 653Pipe Saddle
Fig. 654 & 655Pipe Saddle
Fig. 820Offset J-Hook
Fig. 830Short Pipe
Strap
Fig. 825Two Hole Pipe Strap
Fig. 810Return Line
J-Hook
Fig. 840Right Angle
Clamp
Fig. 550, 551 & 553Riser Clamp
Fig. 552 & 554Copper Tubing
Riser Clamp
Fig. 580Two Bolt Underground
Pipe Clamp
Fig. 585Washer for
Fig. 580
Fig. 590Four Bolt Underground
Pipe Clamp
Fig. 595Washer
for Fig. 590
Fig. 632 & 633Steel Center Load-
Beam Clamp
PiPe Hangers & Devices
5
Wall Brackets
Fig. 890Seismic Brace
Fig. 904Concrete
Clevis Plate
Fig. 903Concrete Rod
Attachment PlateFig. 900 & 900-1
Welded BeamAttachment
Fig. 885Adjustable
Q-Deck Insert
Fig. 920Side Beam
Angle Bracket
Fig. 905Side BeamConnector
Fig. 910Reversible
Angle Bracket
Fig. 950-951NConcrete Insert
Fig. 940-942Ceiling Flange
Fig. 935 & 936Welding Lug
Fig. 930Square Plate
Washer
Fig. 925Reversible Side
Beam Angle Bracket
Fig. 980 & 982Felt Isolator
Fig. 970-973J-Hanger
Fig. 960Turnbuckle
miscellaneous
Fig. 875Adjustable PipeSaddle Support
Fig. 871Threaded Base
Stand
Fig. 870Pipe Saddle Support
with Coupling
Fig. 882Pipe Saddle
Support with U-Bolt
Fig. 880Pipe Saddle
Support
Fig. 876Adjustable Pipe Saddle
Support with U-Bolt
Fig. 850Light Duty
Wall Bracket
Fig. 850CClip for Fig. 850
Wall Bracket
Fig. 855Medium DutyWall Bracket
Fig. 860Heavy DutyWall Bracket
PiPe suPPorts
Fig. 878 Pipe Support
Adjuster
Fig. 879Pipe Support
Adjuster
Fig. 877Pipe Support
Adjuster
Fig. 906Steel Side
Beam Connector
Fig. 945 & 946Steel Ceiling Plate
Fig. 874Pipe Saddle Support
with Stud
Fig. 990Adjustable In-Rack
Flue Hanger
Fig. 995Single In-RackFlue Hanger
strut ProDucts & accessories
cHannel
1001-104215/8” X 15/8” X 12 Ga.
1101-114215/8” X 15/8” X 14 Ga.
1701-174215/8” X 13/8” X 12 Ga.
1201-124215/8” X 13/16” X 12 Ga.
1301-134215/8” X 13/16” X 14 Ga.
1401-144215/8” X 1” X 12 Ga.
1501-154215/8” X 31/4” X 12 Ga.
1601-164215/8” X 27/16” X 12 Ga.
strut clamPs
2501-2587Clamp With
Cushion
2600Cushion Material
2001-2016I.P. Pipe Clamp
2101-2107Universal Pipe
Clamp for EMT, IMC & GRC
2201-2207EMT Conduit Clamp
2301-2314Copper Tubing
Clamp
2401-2461O.D. Tube
Clamp
strut nuts
4500Plastic Closure
Strip
4405-4420Type A End Caps
4440-4470Type B
End Caps
4001-400215/8” X 13/8” X 12 Gauge (Shown)
4101-410215/8” X 13/16” X 12
Gauge
4201-420215/8” X 1” X 12
Gauge
4301-430215/8” X 15/8” X 12
Gauge
3001-3011Strut Nut
without Spring (Shown)
3351-3353Shallow Strut Nut without
Spring
3101-3111Strut Nut
with Spring
3201-3210Strut Nut with Short
Spring
3301-3311Strut Nut
with Long Spring
flat Plate fittings
5000-5004Square Washer
5005-5009No Turn Square Washer
50174-Hole Splice Plate
SWIVEL PLATE5020 2-Hole
5023 3-Hole (Shown)CORNER PLATE5025 3-Hole (Shown)
5030 4-Hole
CROSS GUSSET PLATE5090 6-Hole
5095 7-Hole (Shown)
CORNER GUSSET PLATE
5045 3-Hole 5050 4-Hole
5060 5-Hole (Shown)
50405-Hole Cross Plate
50354-Hole Tee Plate
TEE GUSSET PLATE5065 3-Hole 5075 4-Hole
5080 5-Hole (Shown)5085 6-Hole
SPLICE PLATE5010-5012 2-Hole
5013-5014 3-Hole (Shown)5015 4-Hole5019 5-Hole
1001A-1722AWelded
Back to Back
3404-3408Squeeze
Nut
continuous concrete insert
6
723025-7293127 Series Klo-Sure Clamp for Elasto-meric Insulation
824050-8282628 Series Klo-Shure Clamp for Elasto-meric Insulation
924062-9291909 Series Klo-Shure
Clamp for Fiberglass Insulation
strut ProDucts & accessories
7
90˚ fittings
5101-51071-Hole Angle
5110 & 51122-Hole
Corner Angle
52602-Hole Tapped Corner Angle
52702-Hole Bus Duct Angle
UNIVERSAL SHELF BRACKET
5165 (Shown)5166 Welded
5210 & 52116-Hole
Gussetted Corner
Connector
51483-Hole Offset
Bent Tee
5140-51463-Hole Offset Bent Angle5140 & 5145
(Shown)
51354-Hole
Corner Angle
CORNER ANGLE5120-5123 3-Hole5130-5131 4-Hole
(Shown)
5119“No-Turn”
2-Hole Corner Angle
5115-51182-Hole
Corner Angle
51504-Hole Offset
Bent Tee
5155 & 51564-Hole Offset
Bent Tee
51605-Hole Offset
Bent Tee
5170 - 51764-Hole Corner
Gusset
GUSSETTED SHELF ANGLE
5180 3-Hole 5185 & 5186 4-Hole
5190 5-Hole (Shown)
5220-52262-Hole Adjustable
Corner Angle5221 (Shown)
52282-Hole Adjustable
Corner Angle
5250 & 52554-Hole Adjustable
Corner Angle5250 (Shown)
52303-Hole Adjustable
Corner Angle
JOINT ANGLE CONNECTOR
5200 4-Hole (Shown)
5205 5-Hole
“u” fittings
55133-Hole
“U” Support17/8“ tall
“U” SUPPORT5501 3-Hole - 13/16“ tall5503 5-Hole - 15/8 tall
(Shown)5505 3-Hole - 27/16“ tall 5507 3-Hole - 31/4“ tall
55216-Hole
“U” Support
5530-5532Slotted 3-Hole “U” Support
STUD RING CONNECTOR
5541 1 Stud5542 2 Stud5543 2 Stud
(Shown)
55093-Hole “U”
Support 47/8“ tall
angle fittings Braces
5301-5315 2-Hole Open
Angle Connector
5340-5350 4-Hole Open
Angle Connector
5360-53662-Hole Closed
Angle Connector
5370-53764-Hole Closed
Angle Connector (Shown) 5410-5412
2-Hole 45˚ Knee Brace
5420-54272-Hole 45˚ Tubing
Knee Brace
5430-54402-Hole Straight Tubing Brace
strut ProDucts & accessories
8
“Z” fittings
55502-Hole Offset “Z”
Support
5590Adjustable
Offset Gussetted “Z” Support
55753-Hole Sheath
Corner Connection
5570-55742-Hole ”Z”
Support
5565Tapped “Z”
Support
55562-Hole Offset “Z”
Support
55582-Hole “Z”
Support
5560-55622-Hole “Z” Bus
Duct Connection
“Z” SUPPORT5551 2-Hole for #1200 Strut 5552 3-Hole for #1500 Strut5553 2-Hole for #1600 Strut5554 3-Hole for #1000 Strut
(Shown)
CHANNEL HANGER5580 For #1000 Strut (Shown)
5581 For #1200 Strut5582 For #1500 Strut5583 For #1600 Strut
TRIPLE WING CONNECTOR
5650 6-Hole5655 12-Hole
(Shown)5660 9-Hole
CORNER CONNECTOR
5600 & 5601 3-Hole5605 & 5606 4-Hole5610 & 5611 5-Hole
(Shown)5615 & 5616 6-Hole
DOUBLE CORNER CONNECTOR
5620 4-Hole5625 6-Hole5630 8-Hole
(Shown)
DOUBLE WING CONNECTOR
5635 5-Hole5640 8-Hole5645 10-Hole
(Shown)
56658-Hole Gussetted
Double Corner Connector
567510-Hole Gussetted
Double Corner Connector
56858-Hole Gussetted
Double Corner Connector
clevis fittings misc. fittings
5750-57642-Hole Clevis
57703-Hole ClevisSPLICE CLEVIS
#1200 Strut5705 2-Hole5710 3-Hole5715 4-Hole#1000 Strut5720 2-Hole5730 4-Hole
SINGLE PIPE AXLE
SUPPORT5801 & 5802 for
11/4” Pipe5803 & 5804 for 2” Pipe
(Shown)
5821Pipe Support
Bracket
5825-5827Series Ladder Rungs
Brackets & trolleys
TROLLEY ASSEMBLY
5870 4-Bearing
5845Trolley Beam Joint Support
5835-5837Pipe Coupling
Fitting
STAIR SUPPORT5860 45˚ (Shown)
5861 371/2˚
5830-5834Wall Ladder
Brackets
5840Trolley Beam
Support
TROLLEY ASSEMBLY
5875 2-Bearing
5700-57041-Hole
“U” Washer
Wing fittings
4475-4489Safety End Caps
57804-Hole
Suspension Clevis
57753-Hole
Suspension Clevis
strut ProDucts & accessories
9
Post Bases
6040Post Base
for Double 15/8 Strut
6060Post Base
for Double 15/8 Strut
6050Post Base
for Double 15/8 Strut
6045Post Base
for Double 15/8 Strut
6080Post Base
for 15/8 Back to Back Strut
6095Post Base
for 15/8 Strut
6065Post Base
for Double 15/8 Strut
6005Post Base
for 15/8 Strut
6010Post Base
for 15/8 Strut
6015Post Base
for 15/8 Strut
6020Post Base
for 15/8 Strut
6025Post Base
for 15/8 Strut
6030Post Base
for 15/8 Strut
6035Post Base
for Double 15/8 Strut
Brackets
Beam clamPs
PiPe clamPs, rollers, & HarDWare
6101-6125Shelf
Bracket
6130-6135Single Channel
Bracket
6140-6144Double Chan-
nel Bracket
6150-6152Braced Single
Bracket
6160-6172Braced Single
Bracket
6202-6208Interlocking
Channel Bracket (Slot Up)
6212-6218Interlocking
Channel Bracket (Slot
Down)
6222 & 6224Wrap-Around
Channel Bracket (Slot Up)
6246 & 6248Wrap-Around
Channel Bracket (Slot Up)
6232 & 6234Wrap-Around
Channel Bracket (Slot Down)
CHANNEL BRACKET SUPPT.
6305 Single for 1001 & 1101 Strut
(Shown)6310 Double for 1001A & 1101A
Strut
BEAM CLAMP7070
For use with 15/8” Strut (Shown)
7075For use with 31/4“ Strut
7076For use with
1500A Series Strut
7011 & 7012“I” Beam
Clamp
7020 & 7025“I” Beam
Clamp 7030“Z” Beam
Clamp
7040Beam Clamp
7050 & 7051Square U-Bolt
7060Beam Clamp For use with 15/8“ Strut
7231-7238One Hole Clamp for
O.D. Tubing
7251-7263Standard Pipe
Strap
7370Pipe Stop
7400Separate Rollers
7501-7506Pipe Roller with Axle
753060˚ Separate
Rollers
756060˚ Rollers with
Center Roller
7581-7585Roller
Support
7001 & 7002Heavy DutyBeam Clamp
7600Cradle
Clip
7005 - 7007Beam Clamp
strut ProDucts & accessories
Recommended