Pack 13 - model-space.com

PackPack

1313

STAGE PAGE61 The dashboard 207

62 Speedometer 210

63 Left caravan wall 213

64 The dashboard 216

65 Left caravan window 219

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ. Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.All rights reserved © 2020

Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown.

207

Your parts: 61A. Radio cover 61B. Ashtray cover 61C. Ashtray 61D. The right inner caravan wall CP. 1.7 x 4mm screws IP. 2 x 4mm screws

Stage 61: The dashboard

208

2 Inser t the ashtray cover (61B) into the upper hole in the dashboard, as shown. 1 Al ign the radio cover (61A) with the rec tangular opening in the

dashboard. S ec ure in place with t wo CP screws.

3 Now mount the ashtray (61C ) under the cover and sec ure the with a CP screw. 4 Al ign the tabs in the caravan roof panel with the corresponding

holes in the r ight outer wal l (Stage 40) . S ec ure the par ts together with three CP screws.

209

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 Place the r ight inner caravan wal l (61D) onto the ins ide of the r ight outer wal l. Fi rst t ighten three IP screws into the

indicated holes. 6 Tighten a fur ther four IP screws into the inner wal l to sec ure i t.

210

Your parts: 62A. Speedometer housing 62B. Speedometer 62C. Speedometer backlight 62D. Curtain 62E. Curtain rail EP. 1.7 x 2.5 x 5mm screws

Stage 62: Speedometer

211

2 Instal l the speedometer into the indicated locat ion in the dashboard. S ec ure in place with t wo EP screws.1 Inser t the speedometer (62B) into the housing (62A), pr inted s ide

f i rst, as shown.

3 Press the speedometer backl ight (62C ) into the speedometer. 4 Sl ide the c ur tain (62D) onto the c ur tain ra i l (62E) .

212

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 Inser t the ends of the c ur tain ra i l into the t wo holes over the window in the r ight caravan wal l.

213

Your parts: 63A. Function button 1 63B. Function button 1 housing 63C. Switch 1 63D. Left outer caravan wall CP. 1.7 x 4mm screws

Stage 63: Left caravan wall

214

2 Pass the end of the switch 1 (63C ) through the hole in func t ion button 1 housing (63B). Guide the metal prongs through the

upper hole, and then fold them over the cross-piece. 1 Inser t func t ion button 1 (63A) into the indicated hole in

the dashboard.

3 Place the button housing onto the rear of the dashboard over func t ion button 1 and sec ure with a CP screw. 4 Al ign the tabs of the caravan roof with the corresponding par ts

of the lef t caravan wal l (63D).

215

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 S ec ure the caravan wal l to the roof with three CP screws.

216

Your parts: 64A. Function button 2 64B. Function button 2 housing 64C. Switch 2 64D. Reflector mounts 64E. Reflectors CP. 1.7 x 4mm screws EP 1.7 x 2.5 x 5mm screws

Stage 64: The dashboard

217

2 Pass the end of switch 2 (64C ) through func t ion switch 2 housing (64B), guiding the metal prongs through the upper hole. Then fold

them around the cross-piece to sec ure.1 Inser t func t ion button 2 (64A) into the rec tangular hole in the

dashboard nex t to the ashtray.

3 S crew the housing over func t ion button 2 with t wo CP screws. 4 Place the ref lec tors (64E) into the ref lec tor mounts (64D).

218

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.

5 Mount the ref lec tors to the corresponding points towards the bottom of the lef t caravan wal l and f ix them in place with

t wo EP screws.

219

Your parts: 65A. Air intake chamber 65B. Left caravan window KP. 2 x 3 x 5mm screws EP. 1.7 x 2.5 x 5mm screws

Stage 65: Left caravan window

220

2 S ec ure the chamber f rom the other s ide of the bulkhead with t wo KP screws.1 Inser t the posts on the bottom of the a i r intake chamber (65A)

into the t wo holes in the bulkhead.

3 Place the lef t caravan window (65B) over the corresponding opening in the lef t caravan wal l, a l igning the tabs with the

holes around the opening.4 S ec ure the window with four EP screws.

221

Here is how your assembly should look at the end of this stage. Keep any assemblies, unused parts and spares labelled to one side for later use.