View
224
Download
0
Category
Preview:
Citation preview
8/10/2019 Oil & Gas FEI Product Portfolio
1/12
Oil & Gas Product Portfolio
Patricio Jaime
Patricio.Jaime@fei.com
8/10/2019 Oil & Gas FEI Product Portfolio
2/12
cm
mm
m
nm
Slice & view
Drill core Drill cuttings
3D
Meso
Micro
Nano
Section & view
Surface viewHuman Eye
Optical microscopy
Scanning Electron Microscopy
Automated SEM-EDS
Focused Ion Beam
SEM
DualBeam
FEIs Multi-Scale Analysis Solutions
8/10/2019 Oil & Gas FEI Product Portfolio
3/12
FEI covers Centimeter-scale down to Nano-scale
1 cm 1 mm 100 um 10 um 1 um 100 nm 10 nm
Optical Microscopy
SEM and FIB Combination
Scanning Electron Microscopy
Micro-CT
Naked Human Eye
8/10/2019 Oil & Gas FEI Product Portfolio
4/12
FEIs Core-To-Pore Workflow
4 04-Sep-14
QEMSCAN
Helios NanoLab
MAPSMultiscale imaging
2-D Quantitative petrography
3-D volume reconstruction
cm nm
2-D 3-D
Core Pore
HeliscanMicroCT
8/10/2019 Oil & Gas FEI Product Portfolio
5/12
Scanning electron microscopy (SEM)imaging at multiple scales using MAPS
(Modular Automated Processing System)
to allow characterisation of sub-micron
scale features
SEM imaging
8/10/2019 Oil & Gas FEI Product Portfolio
6/12
8/10/2019 Oil & Gas FEI Product Portfolio
7/12
Old Cores Sidewall Cores
Damaged cores Drill cuttingsUnconsolidated sands
Carbonate Clastic
3D micro-CT imaging
at multiple scales
High resolution 3D
micro-CT imaging of
core material
3D image data with
grey-scale controlled
by X-ray density
8/10/2019 Oil & Gas FEI Product Portfolio
8/12
Higher geometric and signal fidelity
> 10 times faster than conventional CT
Larger length scales at highest resolution
Under the same
conditions aconventional micro-CT
could only scan this
much material at same
resolution.
40 Gbyte scan of carbonate core (5mm diameter, 20mm long, 3.5 micron resolution)
Heliscan
3D micro-CT imaging
at multiple scales
8/10/2019 Oil & Gas FEI Product Portfolio
9/12
Image registration2D-3D: a high resolution 2D SEM image is registered on a 3D micro-CT scan
to map fine features and improve the quality of 3D.
2D-3D: a QEMSCAN mineral map is registered on a 3D micro-CT scan toallow 3D mineral identification
3D-3D: enables accurate combination of 3D images for derivation of
difference maps and mapping of micro-porosity, multiple fluid phases,
dynamic effects etc. (dry and wet imaging)
2D SEM picture registered on 3D plug scan Animation of 2D to 3D registration and computation
of pore space and pore network
8/10/2019 Oil & Gas FEI Product Portfolio
10/12
Image processing
Avizo Fire: Data import of images from:
whole core CT, micro-CT, PET, MRI, Dual-Beam (FIBSEM), SEM, and optical
microscopy;
Image segmentation;
3D data exploration and manipulation;
Easy generation of 3D movies;
Statistical and geometrical analysis of 3D features;
Matlab bridge;
3D registration for multiple imaging;
Avizo XLab:
Direct 3D image-based simulation of:
absolute permeability, molecular diffusivity, electrical resistivity, and
thermal conductivity computation
8/10/2019 Oil & Gas FEI Product Portfolio
11/12
Automated sequential sample Focused Ion Beam (FIB) millingand SEM (Scanning Electron Microscope) imaging creates a
series of high resolution 2D images;
After 3D volume reconstructions, Avizo Fire software can be
used to visualize and quantify textures such pore networks atthe micron to nano-scale.
DualBeam FIBSEM imaging
8/10/2019 Oil & Gas FEI Product Portfolio
12/12
Thank You!
http://www.fei.com/natural-resources/oil-gas/
Recommended