View
4
Download
0
Category
Preview:
Citation preview
Off-Highway Drive and Motion Technologies Deck Cranes
Brevini® motion systems
from Dana for deck crane
applications
With a rapidly growing need for “electrified technologies” to help original-equipment
manufacturers meet standards for reduced pollution and consumption, the deck crane market
is also facing end-user demands for low cost of ownership and a reduced environmental impact.
Dana’s engineering capabilities, broad product
range, and focus on collaboration with
customers allow us to deliver optimal solutions
with the performance required to support high
levels of efficiency. As a single supplier, with a
unique portfolio Brevini® motion systems,
we can also help to optimize supply chains.
Dana – Your Single Source for Motion Systems to Support Deck Cranes
To address these market trends, Dana delivers a range of advanced motion products for deck cranes. We design and manufacture fully integrated motion products for all types of deck cranes, along with other types of cranes used in the marine, offshore, and harbour crane markets.
A Trusted Partner
Dana designs and manufactures fully integrated motion
systems for a complete range of deck cranes with many
variants. Dana’s flexibility and engineering expertise
deliver the right solution for any needs.
We deliver innovative technologies to meet worldwide
customer demands. By anticipating market trends,
Dana uses industry expertise to deliver product
solutions to help customers achieve their goals. Customized Technologies Full-System Solutions Low Cost of Ownership Electrification Global Support
Market-Driven Innovations
PROVEN ENGINEERING EXPERTISE
MULTIPLE PRODUCT COMBINATIONS
SUPPLY-CHAIN OPTIMIZATION
MECHANICS
ELECTRONICS
HYDRAULICS
2
Full-System Solutions for Deck Cranes
Deck cranes – cranes installed on the deck of a ship – come in a wide variety of types and sizes and are often classified by the specific application for which they are designed. All deck cranes share similar basic functions – lifting, lowering, and positioning a load from one site to another. However, functionality varies greatly depending on where the crane is being used. Deck cranes designed to move loads when a ship is docked in the quay handle much smaller loads than deck cranes for offshore
Main Hoist System Active Heave Compensation Main Hoist Drive
Brevini® Axial Piston PumpsDisplacement Up to 226ccMedium and high pressureFixed and variable displacement availableOpen or closed loop circuitAtex certificationsEnvironmentally Acceptable Lubricants (EAL Fluid)Suitable for working in harsh and aggressive environments
Brevini® Industrial Planetary Gearboxes – S SeriesMain winch drivesRatio range up to 5.000:1Modular designInput flange for hydraulic and electric prime mover Compact and light solutions for a perfect fit on the machine framesMarine painting cycleThird parties marine certification available
Brevini® Axial Piston MotorsMain hoist drive motorsMarine painting cycleFixed and variable displacement up to 216 CC/ rev.Seven or nine pistons options technologies Wide control valves rangeThird parties marine certification availableAtex certifications availableEnvironmentally Acceptable Lubricants (EAL Fluid)Suitable for working in harsh and aggressive environments
Brevini® Winch DrivesWinch drive for auxiliary hoist systemRatio range up to 6.000:1Max torque up to 850 kNmThird parties marine certification availableInline and right angle configuration version availableElectric motor connection availableAtex certifications on requestIntegrated hydraulic failsafe negative brake and electromagnetic brake availableSafety devices available as back stop, torque limiter and sensors
Brevini® Planetary Gearboxes – Slewing Drives Torque range up to 370 kNmModular design, inline or right angle configurationWide option of output support configuration (low lange, long a short support with eccentricity)Failsafe negative brakesInput flange for hydraulic and electric prime mover Compact and light solutions for a perfect fit on the machine framesOutput pinion for any customer needsProduct marine / offshore class certification availableSpecial solutions for Low Climate and ATEX
applications, which need to manage several hundred tons, often while ships are floating in a stormy sea. Customizable design options include hydraulic and electric drivelines; telescopic, knuckle, or lattice booms; a range of control system features to improve accuracy; and environmental features to optimize performance based on worksite conditions. Dana works with customers to ensure that all local standards are met, as well as regulations set by the International Association of Classification Societies (IACS).
Dana offers customized solutions to meet a range of customer needs, including modular designs and add-on accessories.
Brevini® Evolution™ Series Winches Winches for auxiliary hoist systemLine pull up to 30 TonsThird parties marine certification availableWide range of safety controlsEquipped with Brevini® high speed axial piston motorLifting of personnel available
Brevini® Proportional Directional ValvesOil Flow Up to 1000lt/minHigh modularityAtex certificationRemote control, electronic operationSmooth control to improve operation functionality and accuracy
43
Brevini® Portfolio expanded with two new products line covers every application in Marine Sector
Through its platform of proven technologies, Dana offers an expanded portfolio of solutions for marine, offshore and port equipment applications to serve the specific needs of these sectors.
A new range of Brevini® Winches and Large Winch Drives offer the reliability and support critical for these applications. Designed for personnel lifting and suitable for third-party certifications, the winch series is suitable for output line pull up to 30 tonnes.
Brevini hydraulic valve ensures safe operation with enhanced control during load lowering
High-performance gears allow for low noise, long product life
Robust steel frame, suitable for low-temperature applications
Robust steel drum, available in grooved or smooth options
Specific multidisc static brake, designed specifically for winch applications
New Brevini® hydraulic axial motor featuring variable displacement with nine pistons; ideal balance of smooth control, at low speeds and high performance
Electrical motor connections can be available on request. The large winch drives cover output torque up to 450 kNM, offering a sizeable solution based on a modular and compact concept design optimized for electric motor connections.
All winches and winch drives are available with Brevini® Fluid-Power hydraulic motors and related control valves that can be customized to satisfy any customer requirement.
Hub and spindle made of high-strength material to meet customer requirements
Lightweight design features a wide range of ratios available with hydraulic or electric motors, ensuring the best performance and highest level of efficiency for each unique application
Multi-disc parking brake improves safety
Brevini® hydraulic axial piston motors and load holding valves available
High radial load bearings deliver reliable lifting performance for heavy loads
Special sealing system designed for severe environments
Brevini® Heavy-Duty Winch Drives Brevini® Evolution™ Series Winches
5
TechnologiesCustomized to Every Partof the Globe
dana.com/oh/contact
About Dana Incorporated About Dana Off-Highway Drive and Motion Technologies
With a global presence in 33 countries, Dana incorporated boasts more than 100 engineering, manufacturing, and distribution facilities. Our worldwide network of local service centers provides assurance that each customer will benefit from the local proximity and responsiveness that they need.
Dana is an integral partner for virtually every major vehicle and engine manufacturer worldwide. We are a leading supplier of drivetrain, sealing, and thermal technologies to the global automotive, commercial-vehicle, and off-highway markets. Founded in 1904, we employ thousands of people across six continents.
Capacity ratings, features, and specifications vary depending upon the model and type of service. Application approvals must be obtained from Dana; contact your
representative for application approval. We reserve the right to change or modify our product specifications, configurations, or dimensions at any time without notice.
Application Policy
Dana delivers fully optimized Spicer® drivetrain systems and individual product solutions to customers in construction, agriculture, material-handling, underground mining, and forestry markets, plus Brevini® motion systems for machine working functions.
©2018 Dana Limited DOSG66528 072018
Learn more about Dana's drivetrain and motion systems at dana.com/offhighway.
Recommended