View
20
Download
0
Category
Preview:
Citation preview
Nokia N93 User Guide
9245183
ISSUE 1 EN
Copyright © 2006 Nokia. All rights reserved.
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this RM-55 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.
Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, Visual Radio, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998-200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC / INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
ISSUE 1 EN, 9245183
ht © 2006 Nokia. All rights reserved.
....................................29clips ............................................ 30..................................................... 30.....................................................32..................................................... 33..................................................... 33..................................................... 34..................................................... 34..................................................... 34..................................................... 35
..................................38.....................................................38.....................................................39.....................................................40
....................................41..................................................... 42s ................................................. 43
s................................................... 45.....................................................47 card .........................................49
..................................................... 49
ConFor you
Your NModes ....Useful shSettings .Transfer cEssential Keypad loVolume aClock.......Headset..Wrist andWireless Home neMemory cFile manaHelp ........Tutorial ..
CameraRecord viTake pict
Copyrig
tentsr safety...........................................6
okia N93.........................................9................................................................................... 9ortcuts...................................................................11.................................................................................12ontent from another device...........................12indicators .............................................................13ck (keyguard)......................................................14nd loudspeaker control ....................................14.................................................................................14.................................................................................15 lens cover straps ..............................................15
LAN.........................................................................15twork......................................................................17ard.........................................................................18ger .........................................................................20.................................................................................21.................................................................................21
..................................................... 22deos........................................................................22ures.........................................................................24
Gallery...................View images and video Edit video clips................Edit images ......................Slide show ........................TV out mode.....................Presentations...................Albums ..............................PrintOnline .......................Online sharing.................
Media applicationsMusic player ....................Image print ......................Back up files ....................
Messaging.............Write text .........................Write and send messageInbox—receive messageMailbox .............................View messages on a SIMMessaging settings........
entries......................................... 72........................................................ 72
......................................73 service) ........................................ 73........................................................ 75........................................................ 77........................................................ 78........................................................ 79
......................................80...................................................... 80
........................................................ 83
........................................................ 84
........................................................ 84
........................................................ 84
........................................................ 85
........................................................ 86
........................................................ 86
......................................90........................................................ 90........................................................ 90........................................................ 90........................................................ 91........................................................ 91
Copyright © 2006 Nokia. All rights reserved.
Make calls ................................................54Voice calls ............................................................................. 54Video calls ............................................................................. 56Video sharing (network service)...................................... 57Answer or reject a call....................................................... 60Log........................................................................................... 62
Contacts (Phonebook) .............................64Save names and numbers................................................. 64Copy contacts ...................................................................... 65Add ringing tones for contacts ....................................... 66Create contact groups ....................................................... 66
Web...........................................................67Web access point ................................................................ 67Bookmarks view................................................................... 67Connection security ........................................................... 68Browse.................................................................................... 68Download and purchase items........................................ 69End a connection ................................................................ 69Web settings......................................................................... 70
Calendar....................................................71Create calendar entries ..................................................... 71Meeting requests ................................................................ 71Calendar views..................................................................... 72
Manage your calendarCalendar settings ........
My own...............Visual Radio (networkRealPlayer......................Flash Player...................Movie director..............Games.............................
Connectivity .......Bluetooth connectivityInfrared connection....Data cbl..........................PC connections ............Connection manager..Synchronization...........Device manager ...........Home network .............
Office..................Calculator ......................Converter .......................Notes ..............................Web browser ................Recorder.........................
ht © 2006 Nokia. All rights reserved.
................................. 113...................................................113
n ............................. 117g...............................................117ation guidelines....................117
nce ......................... 120
nformation............. 121
................................. 124
Copyrig
Barcode reader .....................................................................91Quickoffice ............................................................................92
Personalize your device .......................... 95Profiles—set tones ...............................................................95Change the look of your device.......................................96Active standby mode ..........................................................97
Tools ......................................................... 98Media Key ..............................................................................98Settings ..................................................................................98TV configuration ............................................................... 109Voice commands............................................................... 109Application manager ....................................................... 110Activation keys for copyright-protected files .......... 112
Troubleshooting ...Q&A....................................
Battery informatioCharging and discharginNokia battery authentic
Care and maintena
Additional safety i
Index .....................
6
F WHEN REFUELING Do not use t a refueling point. Do not use near icals.
F NEAR BLASTING Follow any Do not use the device where progress.
LY Use only in the normal explained in the product ion. Do not touch the antenna ly.
SERVICE Only qualified personnel or repair this product.
ENTS AND BATTERIES Use only hancements and batteries. Do not ompatible products.
SISTANCE Your device is not ant. Keep it dry.
OPIES Remember to make ies or keep a written record of all formation.
Copyright © 2006 Nokia. All rights reserved.
For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.
SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFthe device afuel or chem
SWITCH OFrestrictions.blasting is in
USE SENSIBposition as documentatunnecessari
QUALIFIED may install
ENHANCEMapproved enconnect inc
WATER-REwater-resist
BACK-UP Cback-up copimportant in
7ht © 2006 Nokia. All rights reserved.
on features of Microsoft Word, icrosoft Office 97, 2000, XP, and s can be viewed or modified.
ny features in this device, other the device must be switched on. ice on when wireless device use e or danger.
esst have service from a wireless the features in this device wireless network to function. ay not be available on all e to make specific arrangements r before you can utilize network vider may need to give you r their use and explain what networks may have limitations use network services. For may not support all racters and services. Network this guide by (network services).
have requested that certain t activated in your device. If so, ur device menu. Your device may onfigured. This configuration
Copyrig
CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. The keypad is active only in the Fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.
About your deviceThe wireless device described in this guide is approved for use on the EGSM 900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks.
When using the features in this device, obey all laws and respect privacy and legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.
This device supports commPowerPoint, and Excel (M2003). Not all file format
Warning: To use athan the alarm clock, Do not switch the devmay cause interferenc
Network servicTo use the device you muservice provider. Many ofdepend on features in theThese network services mnetworks or you may havwith your service provideservices. Your service proadditional instructions focharges will apply. Some that affect how you can instance, some networks language-dependent chafeatures are designated in
Your service provider mayfeatures be disabled or nothey will not appear on yoalso have been specially c
8
e use of any other types may val or warranty, and may be
ved enhancements, please check you disconnect the power cord of p and pull the plug, not the cord.
Copyright © 2006 Nokia. All rights reserved.
may include changes in menu names, menu order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.
Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, or AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the CA-44 charger adapter.
The battery intended for use with this device is BP-6M.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this
particular model. Thinvalidate any approdangerous.
For availability of approwith your dealer. Whenany enhancement, gras
Your
Nok
ia N
93
9ht © 2006 Nokia. All rights reserved.
the cover display provides clock n the standby mode display, the ry indicators, time information, name of the active profile (if be shown. If you are using the a sound clip, volume bars and layed. Use the side scroll keys to /previous sound clip, and turn
dio in the Fold closed mode, the n on the cover display. You can
ns with station name, frequency, . This information is shown on the audio on and off, change the annels, use the scroll key on the
s and notes for missed calls and re also displayed. To view d the text and image objects of
sages, open the fold, and view display.
ted by their normal tone and a settings, select Answer if fold hen you open the fold. If a
Copyrig
Your Nokia N93Model number: Nokia N93-1
Hereinafter referred to as Nokia N93.
ModesYour device has four mechanical modes that are optimized for different use situations: Fold closed for carrying, Fold open for traditional mobile phone use, Imaging for recording video and taking pictures, and View for viewing your images and videos. To switch between the modes, turn the fold and the swing axis display. There is a short time-out before a mode is activated.
Fold closed modeWhen the fold is closed, the main display deactivates and the cover display lights up. Ongoing calls end, unless the loudspeaker is in use or a compatible headset is connected. To change the settings, see ‘Cover display’, p. 99. If you are using the player to listen to a sound clip, it continues to play.
In the Fold closed mode, and status information. Osignal strength and battestatus indicators, and theother than General) maymusic player to listen to track information are dispplay, pause, play the nextthe volume up or down.
If you are using Visual Ravisual content is not showstore several preset statioand location informationthe cover display. To turn channel, and seek new chside of the device.
Calendar and clock alarmnew received messages areceived text messages anreceived multimedia mesthe message on the main
Incoming calls are indicanote. In the cover displayopened to answer a call w
10
ld opens about 160 degrees, as o not force the fold to open more.
up rn he the ed.
see .
ou ake pictures. See ‘Camera’, p. 22.
e keypad is not active. You can use ey, side scroll key, camera mode cated on the side of the device), scape selection keys and selection isplay.
and you lift the side of the swing ld is closed, the View mode is
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
compatible headset is connected to the device, press the answer key on the headset. To change the settings, see ‘Cover display’, p. 99.
To make calls or use the menu, open the fold.
To use the flash as a torch light, press the flash key on the side of the device. To operate the torch light:• Quickly press the flash key once. The torch light is
activated for 1.5 seconds.• Quickly press the flash key twice. The torch light is
activated for 3 minutes, or until you press the flash key again.
• Press and hold the flash key. The torch light is activated and stays on for as long as you hold the key or until the 3 minute time-out ends.
Fold open modeWhen you open the fold, the Fold open mode is activated automatically: the main display lights up, the keypad is available, and you can access the menu. Scroll in the menu with the scroll key.
The Fold open mode is activated even if the fold is
not fully opened. The foshown in the picture. D
Imaging modeWhen you open the foldto 90 degrees, hold thedevice sideways, and tuthe fold down so that tmain display faces you, Imaging mode is activatThe main camera is activated, and you can the view to be captured
In the Imaging mode, ycan record videos and t
In the Imaging mode, ththe capture key, zoom kkey, and flash key (all lopower key, and the landkeys next to the main d
View modeWhen the fold is closedaxis display when the foactivated.
Your
Nok
ia N
93
11ht © 2006 Nokia. All rights reserved.
ully press the capture key in the
lbox (network service), press and
pplications, press and hold . . press , and select a profile.e General and Silent profiles, you have two phone lines, this en the two lines.
d numbers list, press .ds, press and hold .to Services, press and hold .
ble in the standby mode, see 97.
st, scroll to it, and press and
s in a list, press and hold . To end the selection, release .t: To select letters and words, t the same time, press or opy the text to clipboard, while ct Copy. To insert the text into a old , and select Paste.
Copyrig
Use the View mode to do the following:• View your images.• Activate photos and
movies from the gallery to watch slideshows.
• Make hands free video calls and send live video during a video call. Adjust the angle of the display for optimum secondary camera angle.
Useful shortcutsUse shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions.
Standby mode• To switch between applications that are open, press
and hold , and select an application. If memory is low, the device may close some applications. The device saves any unsaved data before closing an application.Leaving applications running in the background increases the demand on battery power and reduces the battery life.
• To start the camera, fImaging mode.
• To call your voice maihold .
• To open multimedia aSee ‘Media Key’, p. 98
• To change the profile,• To switch between th
press and hold . Ifaction switches betwe
• To open the last diale• To use voice comman• To start a connection
See ‘Web’, p. 67.
For other shortcuts availa‘Active standby mode’, p.
Edit text and lists• To mark an item in a li
at the same time.• To mark multiple item
while you press or, then release
• To copy and paste texpress and hold . Ato highlight text. To cstill holding , seledocument, press and h
12
iew, select Continue.ant to use Bluetooth connectivity
er the data. Both devices must connection type.th connectivity, to have your Nokia es with Bluetooth connectivity,
ect your other device from the list. er a code on your Nokia N93. Enter , and select OK. Enter the same vice, and select OK. The devices are r devices’, p. 82.els, the Transfer application is
vice as a message. To install er device, open the message, and ns on the display., connect the two devices. See ’, p. 83.3, select the content you want to device.
the memory and compatible d) of the other device to the in your Nokia N93 and memory pying time depends on the amount d. You can cancel copying and
tion of a previous transfer, in the fer log.
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
SettingsYour Nokia N93 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.
Transfer content from another device
You can copy content such as contacts and calendar entries from a compatible Nokia phone to your Nokia N93 using Bluetooth connectivity or infrared. The type of content that can be copied depends on the phone model.
Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When your Nokia N93 is switched on without a SIM card, the offline profile is automatically activated.Transfer content1 Press , and select select Tools > Transfer on your
Nokia N93.
2 In the information v3 Select whether you w
or infrared to transfsupport the selected
4 If you select BluetooN93 search for devicselect Continue. SelYou are asked to enta code (1-16 digits)code on the other denow paired. See ‘PaiFor some phone modsent to the other deTransfer on the othfollow the instructioIf you select infrared‘Infrared connection
5 From your Nokia N9copy from the other
Content is copied from memory card (if insertecorresponding location card (if inserted). The coof data to be transferrecontinue later.
To view the log informamain view, select Trans
Your
Nok
ia N
93
13ht © 2006 Nokia. All rights reserved.
ed to the device.
headset with Bluetooth t.
d to the device.
nected to the device.
et data connection is available.
et data connection is active.
et data connection is on hold.
onnection is available.
onnection is active.
onnection is on hold.
ce to scan for wireless LANs, and e. See ‘Wireless LAN’, p. 104.
nection is active in a network
ction is active in a network that .
y is on.
itted using Bluetooth
active.
Copyrig
To view the devices you have copied or transferred data from, in the main view, select Phones.
Essential indicators The device is being used in a GSM network.
The device is being used in a UMTS network (network service).
You have one or more unread messages in the Inbox folder in Messag..
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are forwarded to another number. If you have two phone lines (network service), the indicator for the first line is and for the second
.
A headset is connect
The connection to a connectivity has been los
A loopset is connecte
A text phone is con
A data call is active.
A GPRS or EDGE pack
A GPRS or EDGE pack
A GPRS or EDGE pack
A UMTS packet data c
A UMTS packet data c
A UMTS packet data c
You have set the devia wireless LAN is availabl
A wireless LAN conthat has encryption.
A wireless LAN connedoes not have encryption
Bluetooth connectivit
Data is being transmconnectivity.
A USB connection is
14
r allows you to speak and listen ithout having to hold the device to
hold the device near your ear when use, because the volume may be
during a call, select Options >
ker, select Options > Activate
ck. To set a new alarm, select hen an alarm is active, is
lect Stop, or to stop the alarm for e.
hed while the device is switched itself on and starts sounding the Stop, the device asks whether you vice for calls. Select No to switch make and receive calls. Do not
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.
Keypad lock (keyguard)Use the keypad lock to prevent the keys from being accidentally pressed.
To turn on the display light when the keypad lock is on, press the power key.• To lock: In the standby mode, press , then .
When the keys are locked, is shown on the display.
• To unlock in the Fold open mode: Press , then .• To unlock in the Fold closed mode: Press the scroll key.
An unlock dialog appears on the cover display. Select Yes by moving the scroll key.
When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.
Volume and loudspeaker controlTo increase or decrease the volume level when you have an active call or are listening to a sound, press or .
The built-in loudspeakefrom a short distance wyour ear.
Warning: Do not the loudspeaker is inextremely loud.
To use the loudspeaker Activate loudsp..
To turn off the loudspeahandset.
Clock
Press , and select CloOptions > Set alarm. Wshown.
To turn off the alarm, se5 minutes, select Snooz
If the alarm time is reacoff, the device switchesalarm tone. If you selectwant to activate the deoff the device or Yes to
Your
Nok
ia N
93
15ht © 2006 Nokia. All rights reserved.
time in your device is changed cted. Check that the time is time zone.
here it can endanger your safety.
cover straps
less local area network (wireless you can connect your device to
Copyrig
select Yes when wireless phone use may cause interference or danger.
To cancel an alarm, select Clock > Options > Remove alarm.
Clock settingsTo change the clock settings, select Clock > Options > Settings.
To change the time or date, select Time or Date.
To change the clock shown in the standby mode, select Clock type > Analogue or Digital.
To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.
To change the alarm tone, select Clock alarm tone.
World clockTo open the world clock view, open Clock, and press . In the world clock view, you can view the time in different cities.
To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the
clock main view, and theaccording to the city selecorrect and matches your
HeadsetConnect a compatible headset to the Pop-PortTM
connector of your device.
Warning: When you use the headset, yourability to hear outside sounds may be affected. Do not use the headset w
Wrist and lensThread the straps as shown, and tighten them.
Wireless LANYour device supports wireLAN). With wireless LAN,
16
Internet access point with default change these settings, see ‘Access
ks you to select an access point, s point, or to search for wireless arch for WLAN.
ion is established when you create a wireless LAN Internet access
ss LAN connection ends when you n. To end the connection, see . 84.
N during a voice call or when u can only be connected to one
nt device at a time, but several e same wireless LAN connection.
Offline profile, you can still use le). Remember to comply with any ements when establishing and nnection.
modes in wireless LAN: oc.
ting mode allows two kinds of s devices are connected to each s LAN access point device, or
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
the Internet and compatible devices that have wireless LAN. For information about using your device in a home network, see ‘Home network’, p. 17.
Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.
Features using wireless LAN, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.
Your device supports the following wireless LAN features:• IEEE 802.11b/g standard• Operation at a frequency of 2.4 GHz• Wired equivalent privacy (WEP) with keys up to 128
bits, Wi-Fi protected access (WPA), and 802.1x encryption methods. These functions can be used only if they are supported by the network.
You can create an Internet access point (IAP) in a wireless LAN, and use it for applications that need to connect to the Internet.Create an Internet access point1 Press , and select Connect. > Conn mgr > Availab.
WLAN.2 The device searches for wireless LANs within range.
Scroll to the network in which you want to create an Internet access point, and select Options > Define access point.
3 The device creates ansettings. To view or points’, p. 101.
When an application asselect the created accesLANs in range, select Se
A wireless LAN connecta data connection usingpoint. The active wireleend the data connectio‘Connection manager’, p
You can use wireless LApacket data is active. Yowireless LAN access poiapplications can use th
When you activate the wireless LAN (if availabapplicable safety requirusing a wireless LAN co
There are two operatinginfrastructure and ad h
The infrastructure operacommunication: wirelesother through a wireles
Your
Nok
ia N
93
17ht © 2006 Nokia. All rights reserved.
y prevent some images, music and other content from being d, played, or printed.
g in your wireless LAN, first r wireless LAN home Internet ure the devices. On your Nokia gs in the Home network compatible PC to the home ust install the Media Server
OM supplied with your Nokia
the necessary configurations in he network, you can start using our media files. See ‘View media
he security settings of the Use the home network feature in ure network with a wireless LAN ncryption enabled.
enable one of the available crease the security of your . Using encryption reduces the s to your data.
to the home network only if you est from another device, or in to view, play, print, or copy
Copyrig
wireless devices are connected to a wired LAN through a wireless LAN access point device.
In the ad hoc operating mode, devices can send and receive data directly with each other. To create an Internet access point for the ad hoc network, see ‘Access points’, p. 101.
Tip! To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode.
Home networkYour device is compatible with Universal Plug and Play (UPnP). With a wireless LAN access point device, you can create a home network and connect compatible UPnP devices that support wireless LAN to the network, such as your Nokia N93, a compatible PC, a compatible printer, and a compatible sound system or a TV, or a sound system or TV equipped with a compatible wireless multimedia receiver.
After you have configured the home network, you can copy, view, or play compatible media files and print images in Gallery on the other connected compatible devices, for example, view images stored on your Nokia N93 on a compatible TV. See ‘Home network’, p. 86 and ‘Image print’, p. 39.
Copyright protections ma(including ringing tones),copied, transferred, viewe
To set up home networkincreate and configure youaccess point, then configN93, configure the settinapplication. To connect anetwork, on the PC, you msoftware from the DVD-RN93.
After you have completedall devices connected to tHome network to share yfiles’, p. 88.
The home network uses twireless LAN connection. a wireless LAN infrastructaccess point device and e
Important: Alwaysencryption methods to inwireless LAN connectionrisk of unauthorize acces
Your device is connected accept a connection requGallery, select the option
18
patible miniSD as extra storage ry on your
ck up evice to the memory card.
niSD memory cards with this ards, such as Reduced Size t fit in the memory card slot and this device. Using an incompatible ge the memory card as well as the on the incompatible card may be
out of the reach of small children.dthe
a
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
media files on your Nokia N93 or search for other devices in the Home network folder.
Important security informationWhen you configure your wireless LAN home network, enable an encryption method, first on your access point device, then on the other devices you intend to connect to your home network. Refer to the documentation of the devices. Keep any passcodes secret and in a safe place separate from the devices.
To view or change the settings of the wireless LAN Internet access point in your Nokia N93, see ‘Access points’, p. 101.
If you use the ad hoc operating mode to create a home network with a compatible device, enable one of the encryption methods in WLAN security mode when you configure the Internet access point. This step reduces the risk of an unwanted party joining the ad hoc network.
Your device notifies you if another device attempts to connect to it and the home network. Do not accept connection requests from an unknown device.
If you use wireless LAN in a network that does not have encryption, switch off sharing Nokia N93 files with other devices, or do not share any private media files. To change sharing settings, see ‘Home network settings’, p. 87.
Memory cardYou can purchase a commemory card and use it space to save the memodevice. You can also bainformation from your d
Use only compatible midevice. Other memory cMultiMediaCards, do noare not compatible withmemory card may damadevice, and data storedcorrupted.
Keep all memory cards Insert the memory car1 To open the door of
memory card slot, swing it upwards in counterclockwise direction.
Your
Nok
ia N
93
19ht © 2006 Nokia. All rights reserved.
card tool
s > Memory. You can use a xtra storage space and for on in the device memory.
om the device memory to a ons > Backup phone mem.
m the memory card to the device Restore from card.
rdeformatted, all data on the card
upplied preformatted and others lt your retailer to find out if you card before you can use it.
, select Options > Format mem. m.
ance, use your Nokia N93 to cards.
Copyrig
2 Insert the memory card in the slot. Ensure that the contact area on the card is facing up.
3 Push the card in. You hear a click when the card locks into place.
4 Close the door. You cannot use the memory card if the door is open.
Eject the memory card1 Before you eject the card, press
the power key, and select Remove mem. card. All applications are closed.
2 When Remove memory card and press 'OK' is displayed, swing open the door of the memory card slot.
3 Press the memory card to release it from the slot.4 Remove the memory card. If the device is switched on,
select OK when prompted to confirm the removal. Important: Do not remove the memory card in the
middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
Memory
Press , and select ToolminiSD memory card as ebacking up the informati
To back up information frmemory card, select Opti
To restore information fromemory, select Options >
Format a memory caWhen a memory card is ris permanently lost.
Some memory cards are srequire formatting. Consumust format the memory
To format a memory cardcard. Select Yes to confir
Tip! For best performformat all new miniSD
20
ry details. The amount of available e memory.
ee memoryif the device or the memory card
transfer data to a memory card, if s to be moved, and select Move to and a folder.
edia files to a compatible PC, for sfer option in Gallery. See ‘Back up
ne Browser in Nokia PC Suite to emories in your device and transfer
memory, use File mgr. or the or example, you can remove the
nbox, Drafts, and Sent folders in
ssages from the device memory
s, or sound files
Your
Nok
ia N
93
Copyright © 2006 Nokia. All rights reserved.
File manager
Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.
You can use a memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.
To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools > File mgr.. The device memory view ( ) opens. Press to open the memory card view ( ) (if available).
To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder.
To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.
View memory consumption To view what types of data you have in the device and how much memory the different data types consume,
select Options > Memomemory is shown in Fre
Memory low—frThe device notifies you memory is low.
To free device memory, you have one. Mark filefolder > Memory card
You can also transfer mexample, using the tranfiles’, p. 40.
Tip! Use Nokia Phoview the different mdata.
To remove data to free respective application. Ffollowing:• Messages from the I
Messag.• Retrieved e-mail me• Saved Web pages• Saved images, video• Contact information• Calendar notes
Your
Nok
ia N
93
21ht © 2006 Nokia. All rights reserved.
Copyrig• Downloaded applications. See also ‘Application manager’, p. 110.
• Any other data that you no longer need
Help
Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.
When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .
To open help from the main menu, select Tools > Help. Select the desired application to view its help topics.
Tutorial
The tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select My own > Tutorial and the section you want to view.
22
start recording. The record icon cording indicator is displayed and g that video is being recorded. any time, press the capture key.y again to resume recording. omatically saved to the Images & ry. See ‘Gallery’, p. 29.
lor adjustments before recording a de, use the side scroll key to scroll ‘Setup settings—Adjust color and oting modes’, p. 27.
subject (continuous 3x optical and rotate the zoom key on the side of
splays the following:
Cam
era
Copyright © 2006 Nokia. All rights reserved.
CameraYour Nokia N93 has two cameras, a high resolution camera on the side of the device (the main camera) and a lower resolution camera on the top of the main display (the secondary camera). You can use both cameras to take still images and record video in the portrait and landscape views.
The Nokia N93 device supports an image capture resolution of 2048x1536 pixels using the main camera. The image resolution in these materials may appear different.
The images and video clips are automatically saved in the Images & video folder in Gallery. The cameras produce .jpeg images. Video clips are recorded in the .mp4 file format, or in the 3GPP file format with the .3gp file extension (Sharing modes). See ‘Video settings’, p. 23.
You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity.
Record videosActivate the main camera by rotating the display to the Imaging mode. If the camera is in the Image mode, use the camera mode key to select Video mode.
Press the capture key to is shown. The red re
a tone sounds, indicatin1 To stop recording at2 Press the capture ke
The video clip is autvideo folder of Galle
To make lighting and covideo in the Imaging mothrough the toolbar. Seelighting’, p. 27 and ‘Sho
To zoom in or out of theup to 20x digital zoom),the device.
The video viewfinder di
Cam
era
23ht © 2006 Nokia. All rights reserved.
lip, select the following from the
he video clip you just recorded,
keep the video, select Delete.g multimedia, e-mail, Bluetooth, all key, or select Send. For more
saging’, p. 41 and ‘Bluetooth is option is not available during not send video clips saved in the ultimedia message.
clip, select New video.line profile to ensure your video upted by incoming calls or
ttings for the video recorder: tings. To adjust Video setup, see lor and lighting’, p. 27. The
he default settings after you main settings remain the same ain. To change the main settings, s and from the following:
On if you want to record sound.
Copyrig
• Status indicators (1) for audio mute on, stabilization on, and the current capture mode.
• The toolbar (2), which you can scroll through before recording to select the shooting mode, white balance, and color tone (the toolbar is not displayed during recording).
• The total available video recording time (3). When you are recording, the current video length indicator also shows the elapsed time and time remaining.
• The device memory ( ) and memory card ( ) indicators (4) show where videos are saved.
• The video quality indicator (5) indicates whether the quality of the video is TV (high), TV (normal), Handset (high), Handset (normal), or Sharing.
• The video clip file type (6). Tip! Select Options > Turn icons on to display all
viewfinder indicators or Turn icons off to display only the video status indicators.
After you record a video ctoolbar:• To immediately play t
select Play.• If you do not want to• To send the video usin
or infrared, press the cinformation, see ‘Mesconnectivity’, p. 80. Than active call. You can.mp4 file format in a m
• To record a new video Tip! Activate the Off
recording is not interrmessages.
Video settingsThere are two kinds of seVideo setup and main set‘Setup settings—Adjust cosetup settings return to tclose the camera, but theuntil you change them agselect Options > Setting
Audio recording—Select
Exit
Options
24
the default memory store: device d (if inserted).
ra by rotating the display to mera is in video mode, use the itch to image mode.
object, press the capture key mera only). The green locked focus e display. If the focus was not dicator appears. Release the t halfway down again. You can, re without locking the focus.
main camera, press the capture evice before the image is saved.
nd color adjustments before taking mode by using the side scroll key olbar. See ‘Setup settings—Adjust 7.
age may take longer if you change olor settings.
displays the following:
Cam
era
Copyright © 2006 Nokia. All rights reserved.
Video quality—Set the quality of the video clip to TV (high) (best quality for long term usage and playback on a compatible TV or PC and handset), TV (normal), Handset (high), Handset (normal), or Sharing (limited video clip size to send using multimedia message (MMS)). If you want to view the video on a TV or PC, select TV (high), which has VGA resolution (640x480) and the .mp4 file format. To send the video clip through MMS, select Sharing (QCIF resolution, .3gp file format). The size of the video clip recorded with Sharing is limited to 300 KB (about 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device.
Video stabilisation—Select On to reduce camera shake when recording the video.
Add to album—Select whether you want to add the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums.
Show captured video—Select whether you want the first frame of the recorded video clip to be shown on the display after the recording stops. Select Play from the toolbar (main camera) or Options > Play (secondary camera) to view the video clip.
Optical zoom during recording—Select On or Off. Select Off to eliminate mechanical noise caused by lens movement during optical zooming when recording.
Memory in use—Definememory or memory car
Take picturesActivate the main cameImaging mode. If the cacamera mode key to sw
To lock the focus on anhalfway down (main caindicator appears on thlocked, the red focus incapture key, and press ihowever, take the pictu
To take a picture, in thekey. Do not move the d
You can make lighting aa picture in the Imagingto scroll through the tocolor and lighting’, p. 2
Saving the captured imthe zoom, lighting, or c
The camera viewfinder
Cam
era
25ht © 2006 Nokia. All rights reserved.
te the following:p the camera still.lly zoomed picture is lower than picture.the battery saving mode if there a moment. To continue taking
, select the following from the
keep the image, select Delete.g multimedia, e-mail, Bluetooth, call key, or select Send. ge, select New image.elect Print. See ‘Image print’,
ra settingstings for the still image camera: ttings. To adjust Image setup, st color and lighting’, p. 27. The he default settings after you main settings remain the same ain. To change the main settings, s and from the following:
- Large (2048x1536 ed. (1600x1200 resolution),
Copyrig
• Status indicators (1) for sequence on, self-timer on; Automatic ( ), On ( ), or Off ( ) flash mode, and the current capture mode.
• The toolbar (2), which you can scroll through before capturing the image to select the shooting mode, white balance, exposure value, and color tone (the toolbar is not displayed during focus and image capture).
• The image resolution indicator (3) indicates whether the quality of the image is Print 3M - Large (2048x1536 resolution), Print 2M - Med. (1600x1200 resolution), Print 1.3M - Small (1280x960 resolution), or MMS 0.3M (640x480 resolution).
• The image counter (4) displays the estimated number of images you can capture using the current image quality setting and memory in use (the counter is not displayed during focus and image capture).
• The device memory ( ) and memory card ( ) indicators (5) show where images are saved.
Tip! Select Options > Turn icons on to display all viewfinder indicators or Turn icons off to display only the camera status indicators.
When taking a picture, no• Use both hands to kee• The quality of a digita
that of a nonzoomed • The camera goes into
are no keypresses for pictures, press .
After you take the picturetoolbar:• If you do not want to• To send the video usin
or infrared, press the • To capture a new ima• To print the picture, s
p. 39.
Still image cameThere are two kinds of setImage setup and main sesee ‘Setup settings—Adjusetup settings return to tclose the camera, but theuntil you change them agselect Options > Setting
Image quality—Print 3Mresolution), Print 2M - M
Exit
Options
26
a sequencelable only in the main camera.
e up to six pictures in a sequence lable), select Options > Sequence
ss the capture key.
res, they are shown in a grid on the re, press to open it.
quence mode with the self-timer.
ce mode viewfinder, press the
re—self-timerle only in the main camera.
lay the capture so that you can icture. To set the self-timer delay,
imer > 2 seconds, 10 seconds, or the self-timer, select Activate. The ) blinks and the device beeps when camera takes the picture after the
lf-timer in the sequence mode.
Cam
era
Copyright © 2006 Nokia. All rights reserved.
Print 1.3M - Small (1280x960 resolution), or MMS 0.3M (640x480 resolution). The better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M - Large, Print 2M - Med., or Print 1.3M - Small. If you want to send it through e-mail, select Print 1.3M - Small. To send the image through MMS, select MMS 0.3M.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens.
Show captured image—Select Yes if you want to see the captured image after it is taken, or No if you want to continue taking pictures right away.
Extended zoom (main camera only)—Select On (continuous) to allow the zoom increments to be smooth and continuous between digital and extended digital zoom, On (paused) to allow the zoom increments to pause at the digital and extended digital step point. If you want to limit the zoom to where the selected image quality is maintained, select Off.
Flicker cancellation—Select 50Hz or 60Hz.
Shutter tone—Select the tone you want to hear when you take a picture.
Memory in use—Select where to store your images.
Take pictures inSequence mode is avai
To set the camera to tak(if enough memory avaimode.
To take the pictures, pre
After you take the pictudisplay. To view a pictu
You can also use the se
To return to the sequencapture key.
You in the pictuThe self-timer is availab
Use the self-timer to deinclude yourself in the pselect Options > Self t20 seconds. To activateself-timer indicator (the timer is running. Theselected delay elapses.
You can also use the se
Cam
era
27ht © 2006 Nokia. All rights reserved.
e current lighting condition the camera to reproduce colors
only)—Adjust the exposure time
lor effect from the list.
es to match any settings you the change affects the pictures
y depending on the selected
mera specific; if you change the camera, the settings in the main e setup settings do, however, ge and video modes.
u to find the right color and urrent environment. Select a taking pictures or recording ting mode list. The settings of been set according to a certain
available in the main camera.
Copyrig
Tip! Select Options > Self timer > 2 seconds to keep your hand steady when taking a picture.
FlashThe flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.
The camera has an LED flash for low light conditions. The following flash modes are available: Automatic ( ), On ( ), and Off ( ).
To switch between the flash modes, press the flash key.
Setup settings—Adjust color and lightingTo enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, use the side scroll key to scroll through the toolbar, and select from the following options:
Shooting mode—Select a proper shooting mode for the environment in which you take pictures. Every shooting mode uses its own lighting settings that have been adjusted according to a certain kind of environment.
White balance—Select thfrom the list. This allows more accurately.
Exposure value (images of the camera.
Colour tone—Select a co
The screen display changmake, so that you see howor videos.
The available settings varcamera.
The setup settings are casettings in the secondary camera do not change. Thtransfer between the ima
Shooting modesA shooting mode helps yolighting settings for the cproper shooting mode forvideo clips from the shooeach shooting mode havestyle or environment.
Shooting modes are only
28
Cam
era
Copyright © 2006 Nokia. All rights reserved.
Use the side scroll key to scroll through the toolbar, and select from the following options:
Video shooting modes
Normal ( )(default) and Night ( )
Image shooting modes
Automatic ( ) (default), User ( ), Close-up mode ( ), Landscape ( ), Night ( ), and Night portrait ( ).
When you take pictures, the default shooting mode is Automatic.
To make your own shooting mode suitable for a certain environment, scroll to User, and select Options > Change. In the user defined shooting mode you can adjust different lighting and color settings. To copy the settings of another shooting mode, select Based on shooting mode and the desired shooting mode.
Galle
ry
29ht © 2006 Nokia. All rights reserved.
card/Move to memory card or ve to phone mem..
ry card (if inserted) are indicated the device memory are indicated
ges that you already copied to o a compatible PC, select mory > Shrink. Selecting tion of an image to 640x480. To ce after you have copied items to , select a file and Options > Free es’, p. 40.
llery in one of the main folders Graphic downl., Video downl., ownl.. The browser opens, and k from which the site can
d in Gallery with other through wireless LAN, you must your wireless LAN home Internet nfigure the Home network LAN’, p. 15.
Copyrig
GalleryTo store and organize your images, video clips, sound clips, playlists, and streaming links, or share your files with other compatible Universal Plug and Play devices through wireless LAN, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. From Camera, only the Images & video folder is available.
Tip! To switch from Gallery to the camera, in the Images & video folder, press the capture key or the camera mode key, or select Options > Go to Camera.
Select Images & video , Tracks , Sound clips , Streaming links , Presentations , All files , or Home network , and press to open it.
Video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer’, p. 75. You can also create albums; and mark, and add items to albums. See ‘Albums’, p. 34.
To open a file, press . Videos open in RealPlyr., and music and sound clips in Mus. plyr.. See ‘View images and video clips’, p. 30.
To copy or move files to the memory card (if inserted) or to device memory, select a file and Options > Move and
copy > Copy to memoryCopy to phone mem./Mo
Files stored on the memowith . Files stored on with .
To reduce the size of imaother locations, such as tOptions > Transfer & meShrink reduces the resoluincrease free memory spaother locations or devicesmemory. See ‘Back up fil
To download files into Gausing the browser, selectTrack downl., or Sound dyou can select a bookmardownload.
To share media files savecompatible UPnP devicesfirst create and configureaccess point, and then coapplication. See ‘Wireless
30
clips, select a video clip or several select Options > Edit. See ‘Edit
a compatible printer, or to store ard (if inserted) for printing, select age print’, p. 39.
essage to your service provider's rvice (network service), press the ad (if available). Contact your e information.
ll to an image and press .
ed, to zoom an image, select oom out. The zooming ratio is at he zooming ratio is not stored
background image, select the ssign > Set as wallpaper.
ideo clip, press .
sllery and create custom video clips, d select Options >Edit. See e custom video clips, combine and d images, sound clips, transitions,
Galle
ry
Copyright © 2006 Nokia. All rights reserved.
The options related to Home network are not available in Gallery before the Home network settings have been configured.
View images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, through Bluetooth connectivity, or by using infrared. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the device memory or on a memory card (if inserted).
Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files is displayed. To browse the files one by one, scroll left or right. To browse files in groups, scroll up or down.
To edit a video clip or a photo, select Options > Edit. An image editor or a video editor opens. See ‘Edit video clips’, p. 30. See ‘Edit images’, p. 32.
To add an image or a video clip to an album in the gallery, select Options > Albums > Add to album. See ‘Albums’, p. 34.
To create custom video clips in the gallery, andvideo clips’, p. 30.
To print your images onthem on your memory cOptions > Print. See ‘Im
To send a multimedia mmedia file uploading secall key, and select Uploservice provider for mor
To view the image, scro
When the image is openOptions > Zoom in or Zthe top of the display. Tpermanently.
To use the picture as a picture and Options > A
To delete an image or v
Edit video clipTo edit video clips in Gascroll to a video clip, an‘Gallery’, p. 29. To creattrim video clips, and ad
Galle
ry
31ht © 2006 Nokia. All rights reserved.
lip to the selected location.
deo clip from the video.
of the selected video clip.
you added text)—To move, ; change the color and style of it stays on the screen; and add
f you added an image)—To move, age; define how long it stays on
kground or a color effect to the
nly if you have added a sound sound clip, to adjust its length, the clip.
e three types of transitions: at e end of a video, and transitions can select start transition when video is active.
Image, Text, Sound clip, or New
ie in the full screen or as a he movie, or cut the movie to a in a multimedia message.
Copyrig
and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips.
You can also use Movie director to create custom video clips. Select the video clips and images you want to create a muvee with and select Options > Edit > Create muvee. See ‘Movie director’, p. 78.
In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down.
Edit video, sound, image, text, and transitionsTo create custom video clips, mark and select one or more video clips, and select Options > Edit.
To modify the video, select from the following options:
Edit video clip:
Cut—Trims the video clip in the cut video clip view.
Add color effect—Inserts a color effect on the video clip.
Use slow motion—Slows the speed of the video clip.
Mute sound/Unmute sound—Mutes or unmutes the original video clip sound.
Move—Moves the video c
Remove—Removes the vi
Duplicate—Makes a copy
Edit text (shown only if remove, or duplicate textthe text; define how longeffects to the text.
Edit image (shown only iremove, or duplicate an imthe screen; and set a bacimage.
Edit sound clip (shown oclip)—To cut or move theor to remove or duplicate
Edit transition—There arthe start of a video, at thbetween video clips. You the first transition of the
Insert—Select Video clip,sound clip.
Movie—Preview the movthumbnail, save or send tproper size for sending it
32
r taking them, or the ones already Options > Edit.
crop and rotate the image; adjust ntrast, and resolution; and add a frame to the picture.
t Options > Apply effect > Crop. anually, select Manual or a
from the list. If you select Manual, per left corner of the image. Move
the area to crop, and select Set. n the lower right corner. Again pped. To adjust the first selected
elected areas form a rectangle, d image.
ined aspect ratio, select the upper o be cropped. To resize the e scroll key. To freeze the selected the area within the picture, use
the area to be cropped, press .
eyes in an image, select Options > redu.. Move the cross onto the p appears on the display. To resize f the eye, move the scroll key. To
ss .
Galle
ry
Copyright © 2006 Nokia. All rights reserved.
To take a snapshot of a video clip, in the cut video view, select Options > Take snapshot. In the thumbnail preview view, press , and select Take snapshot.
To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory.
In the Settings view, you can also define Default video name, Default sc. shot name, Resolution, and Memory in use.
To send the video, select Send > Via multimedia,Via e-mail, Via Bluetooth, or Via infrared. Contact your network operator or service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message,
appears.
Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth wireless technology. See ‘Send data using Bluetooth connectivity’, p. 82. You can also transfer your videos to a compatible PC using Bluetooth connectivity, or by using a memory card reader enhancement.
Edit imagesTo edit the pictures aftesaved in Gallery, select
Select Apply effect to the brightness, color, coeffects, text, clip art, or
To crop an image, selecTo crop the image size mpredefined aspect ratio a cross appears in the upthe scroll key to select Another cross appears iselect the area to be croarea, select Back. The swhich forms the croppe
If you selected a predefleft corner of the area thighlighted area, use tharea, press . To movethe scroll key. To select
To reduce redness of theApply effect > Red eyeeye, and press . A loothe loop to fit the size oreduce the redness, pre
Galle
ry
33ht © 2006 Nokia. All rights reserved.
file from the list.
e volume during the slide show,
images stored in your device on le TV. Connect the Nokia ) from the TV out Pop-Port to the video input of a lications other than the Images and RealPlyr., the TV screen on the screen of your device.
in the thumbnail view while it is om in option is not available. d, the opened image is displayed
images as a slide show. All items eos and images are displayed on e the selected music plays.
hted video clip, RealPlyr. starts the device display and the TV . 75.
tereo video clip sound, ringing ted to the TV when the Nokia
Copyrig
Shortcuts in the image editor:• To view an image in the full screen, press . To return
to the normal view, press again.• To rotate an image clockwise or counterclockwise,
press or .• To zoom in or out, press or .• To move on a zoomed image, scroll up, down, left, or
right.
Slide showSelect Options > Slide show > Start to view images and video clips in the full screen mode. The slide show starts from the selected file. Select from the following:• Play—to open the RealPlayer application, and play a
selected video clip• Pause—to pause the slide show• Continue—to resume the slide show, if paused• End—to close the slide show
To browse the images, press (previous) or (next).
To adjust the tempo of the slide show, before starting the slide show, select Options> Slide show > Settings > Delay between slides.
To add sound to the slide show, select Options > Slide show > Settings and from the following:• Music—Select On or Off.
• Track—Select a music
To decrease or increase thpress or .
TV out modeYou can watch videos andthe screen of a compatibVideo-Out Cable (CA-64Uconnector on your devicecompatible TV. For all app& video folder in Gallerydisplays what is displayed
When you open an imageviewed on the TV, the ZoWhen image is not zoomeon the TV in full screen.
You can view videos and in an album or marked vidthe TV in full screen whil
When you open a highligplaying the video clip on screen. See ‘RealPlayer’, p
All audio, including the stone, and key tone, is rou
34
n album, press . The file is not s & video folder in Gallery.
ility of this service may vary untry or sales area.
pplication you can print images nt products with the selected
mouse pads. The available products rovider.
line, you must subscribe to the rinting service provider and have at e configuration file installed. The
om printing service providers that
es that are in .jpeg format.
ay prevent some images, music ), and other content from being erred or forwarded.
Gallery > Images & video. Select and Options > Print > Order
ider from the list.from the following:onnection to the service provider
Galle
ry
Copyright © 2006 Nokia. All rights reserved.
Video-Out Cable is connected to the device. You can use the device microphone normally.
TV out settings must be configured for the applicable TV system and TV aspect ratio. See ‘TV configuration’, p. 109.
PresentationsWith presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play.
To zoom in, press . To zoom out, press .
To switch between full screen and normal screen, press *.
AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums.
To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options > Albums > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press .
To remove a file from adeleted from the Image
PrintOnline Note: The availab
according to your co
With the PrintOnline aonline, and order differeimage, such as mugs or depend on the service p
In order to use PrintOnservice with an online pleast one printing servicfiles can be obtained frsupport PrintOnline.
You can only print imag
Copyright protections m(including ringing tonescopied, modified, transf
1 Press , and selectan image or images,prints.
2 Select a service prov3 Select Options and
Open—to start the c
Galle
ry
35ht © 2006 Nokia. All rights reserved.
t, Order sent successfully is
ity of this service may vary ntry or sales area.
application, you can share your ne albums, weblogs, or in other the Web. You can upload
posts as drafts and continue nt of the albums. The supported epending on the service provider.
y prevent some images, music and other content from being red or forwarded.
u must subscribe to the service ring service provider. You can ervice on the Web page of the your service provider for details ice. For more information on ers, see www.nokia.com/
Copyrig
Remove—to remove the service provider from the list. If you remove the last service provider from the list, the Order prints option is not available until you have at least one configuration file installed.Log—to view the details of the previous orders: the name of the service provider, total sum, and status of the order.When you are connected to the service provider server, the images preview view opens, and displays the images you selected in Gallery.
4 Select Options and from the following:Preview—to view the image before ordering a print. Scroll up or down to view the images.Order now—to submit your orderChange product order—to adjust the product details and number of copies for the selected image. In the product order view, you can select which product and of what type you want to order. The available options and products vary depending on the service provider.Scroll left or right to view and change the image details of the other images in the order.Change customer info—to change the customer and order information. You can copy the customer information from contacts.Add image—to add more images to the orderRemove image—to remove images from the orderLog—to view the details of the previous orders.
When the order is sendisplayed.
Online sharing Note: The availabil
according to your cou
With the Online sharing images and videos in onlionline sharing services oncontent, save unfinished later, and view the contecontent types may vary d
Copyright protections ma(including ringing tones),copied, modified, transfer
Get startedTo use Online sharing, yowith an online image shausually subscribe to the sservice provider. Contact on subscribing to the servcompatible service providsupport/phones/N93.
36
tarted, select Cancel > Save as
e and upload the files to the Web, d, or press .
vices and videos in the online service, es in your device, in the Images & ions > Online services > Open ated a new account offline, or service settings through a Web e PC, to update the services list in ons > Retrieve services. Select a
, select from the following:ser—to connect to the selected uploaded and draft albums in the ew may vary depending on the
edit the draft entries, and upload
0 latest entries created through
a new entry
ay vary depending on the service
Galle
ry
Copyright © 2006 Nokia. All rights reserved.
When you open the service for the first time in the Online sharing application, you are prompted to provide the user name and password. You can access the settings later through Options > Settings in the Online sharing application. See ‘Online sharing settings’, p. 37.
Upload filesPress , and select Gallery > Images & video, the files you want to upload, and Options > Send > Web upload. You can access the Online sharing application also from the main camera.
The Select service view opens. To create a new account to a service, select Options > Add new account or the service icon with the text Create account in the services list. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. To select a service, press the scroll key.
When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganize them, add text to them, or add new files.
To cancel the Web upload process, and save the created post as a draft, select Back > Save as draft. If the
uploading has already sdraft.
To connect to the servicselect Options > Uploa
Open online serTo view uploaded imageand draft and sent entrivideo folder, select Optservice. If you have cremodified an account orbrowser on a compatiblyour device, select Optiservice from the list.
After you open a service• Open in Web brow
service and view theWeb browser. The viservice provider.
• Drafts—to view andthem to the Web
• Sent—to view the 2your device
• New post—to create
The available options mprovider.
Galle
ry
37ht © 2006 Nokia. All rights reserved.
lect the size in which the image f your device. This setting does ge size.
ct the font size used to display ies, or when you add or edit text
w or edit service provider e provider, or view details of a
ange the service provider, all the for the previous service provider e the settings of predefined
change the access point used to vice, select the access point you
Copyrig
Online sharing settingsTo edit the Online sharing settings, in the Online sharing application, select Options > Settings.
My accountsIn My accounts, you can create new accounts or edit existing accounts. To create a new account, select Options > Add new account. To edit an existing account, select an account and Options > Edit. Select from the following:
Account name—to enter a name for the account
Service provider—to select the service provider you want to use. You cannot change the service provider for an existing account, you must create a new account for the new service provider. If you delete an account in My accounts, the services related to the account are also deleted from you device, including the sent items for the service.
User name and Password—to enter the user name and password you created for your account when you registered to the online service
Upload image size—to select the size in which the images are uploaded to the service
Application settingsDisplay image size—to seis shown on the display onot affect the upload ima
Display text size—to seletext in draft and sent entrto a new entry
AdvancedService providers—to viesettings, add a new servicservice provider. If you chMy accounts informationis lost. You cannot changservice providers.
Default access point—toconnect to the online serwant.
38
sic player, the previously played ayed. To view the music library, Music library and the desired song songs in the view, select Options >
to change between play and pause,
. To fast forward or rewind, press start playing the next or previous
ayed song list, select or playing'. To save the song list as a > Add to track list, and create a saved playlist.
ress or .
usic playback, select Options >
m play and normal play mode, m play. To select whether playing
Med
ia a
pplic
atio
ns
Copyright © 2006 Nokia. All rights reserved.
Media applicationsMusic player
Press , and select Mus. plyr.. With the music player, you can play music files and create and listen to playlists.
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.
After you add or remove music files in the device, update your music library. Select Options > Music library > Options > Update Music library.
Tip! You can transfer music files from your device to a compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.
Play musicWhen you open the mutrack or playlist is displselect or Options > list. To start playing the Play.
When a song is playing, press or .
To stop a song, press and hold or . Tosong, press or .
To view the currently plOptions > Open 'Now playlist, select Optionsnew playlist, or select a
To adjust the volume, p
To modify the tone of mEqualiser.
To select between randoselect Options > Rando
Med
ia a
pplic
atio
ns
39ht © 2006 Nokia. All rights reserved.
your images using a data cable, ), Bluetooth connectivity, or a (if available).
s that are in .jpeg format. The mera are automatically saved in
ge print, select the image you nt option in the gallery, camera, ewer.
atible with Image print, connect select the print option.
t for the first time, a list of yed after you select the image. er is set as the default printer.
rinter compatible with Image ble, the printer is automatically
t available, a list of available ed.
nter, select Options > Print r.
Copyrig
stops at the end of the playlist or restarts from its beginning, select Options > Loop.
To open your Web bookmarks for downloading music, select Options > Track downloads.
To return to the standby mode and leave the music playing in the background, select Options > Play in background.
Music libraryTo view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.
To add songs, albums, artists, genres, or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.
To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks.
To delete a playlist, press . Deleting a playlist only deletes the playlist, not the music files.
Image printUse Image print to print wireless LAN (if availablecompatible memory card
You can only print imagepictures taken with the ca.jpeg format.
To print images with Imawant to print, and the priimage editor, or image vi
To print to a printer compthe data cable before you
Printer selectionWhen you use Image prinavailable printers is displaSelect a printer. The print
If you have connected a pprint using the CA-53 cadisplayed.
If the default printer is noprinting devices is display
To change the default prisettings > Default printe
40
device or Store in folder settings, gs.
Med
ia a
pplic
atio
ns
Copyright © 2006 Nokia. All rights reserved.
Print previewThe print preview view opens only when you start printing an image in the gallery.
The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.
Print settingsThe available options vary, depending on the capabilities of the printing device you selected.
To set a default printer, select Options > Default printer.
To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.
Back up filesTo transfer and back up media files from your device to a compatible PC through the wireless LAN, select Options > Transfer > Start. See ‘Wireless LAN’, p. 15.
Your device starts a device search. Select a device and a folder to which you want to transfer the media files. Select OK.
To change the Storage select Options > Settin
Mes
sagi
ng
41ht © 2006 Nokia. All rights reserved.
ges that have not been sent are
essages that have been sent, using Bluetooth connectivity or To change the number of e ‘Other settings’, p. 53.
aiting to be sent are temporarily
are placed in the outbox, for evice is outside network schedule e-mail messages to be connect to your remote
quest the network to send you a t messages and multimedia network service). Receiving a media message that has been may not be possible.
opened any of the default een the folders, press or .
requests (also known as USSD ation commands for network
Copyrig
MessagingPress , and select Messag.. In Messag., you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Web service messages, cell broadcast messages, and send service commands.
To create a new message, select New message.
Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.
Messag. contains the following folders:
Inbox—Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often, use texts in the templates folder.
Mailbox—Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 51.
Drafts—Draft messastored here.
Sent—The last 20 mexcluding messages sent infrared, are stored here. messages to be saved, se
Outbox—Messages wstored here.
Example: Messagesexample, when your dcoverage. You can alsosent the next time youmailbox.
Reports—You can redelivery report of the texmessages you have sent (delivery report of a multisent to an e-mail address
Tip! When you havefolders, to switch betw
To enter and send servicecommands), such as activ
42
ocated on the same key as the til the cursor appears (or press period), and enter the letter.ess . To move the cursor to the three times.
nputr with a single keypress. Predictive built-in dictionary to which you
is displayed when you write xt input.e text input, press , and select This activates predictive text input device.word,
. once
okia"
d, for o, and
changes after each keypress.ting the word correctly, press ss to add a space.
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
services, to your service provider, select Options > Service command in the main view of Messag..
Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.
Write textABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.
Traditional text input is displayed when you are writing text using
traditional text input.• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters available for a number key than are printed on the key.
• If the next letter is lpresent one, wait unto end the time-out
• To insert a space, prnext line, press
Predictive text iYou can enter any lettetext input is based on acan add new words. text using predictive te1 To activate predictiv
Predictive text on. for all editors in the
2 To write the desired press the keys —Press each key only for one letter. For example, to write "Nwhen the English dictionary is selectepress for N,
for k, for i, for a.
The word suggestion3 When you finish wri
to confirm it, or pre
Mes
sagi
ng
43ht © 2006 Nokia. All rights reserved.
ter and number mode, press and
fferent character modes, press
ss . To delete more than one .
ation marks are available under
haracters, press and hold .
l special characters at the same you select each character.
messagesimedia message may vary, g device.
y prevent some images, music and other content from being red or forwarded.
ultimedia message or write an e correct connection settings in and e-mail settings’, p. 45 and
Copyrig
If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one, or press , and select Predictive text > Matches.If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.
4 Start writing the next word.
Write compound wordsWrite the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.
Turn predictive text input offTo turn predictive text input off for all editors in the device, press , and select Predictive text > Off.
Tip! To turn predictive text input on or off, quickly press twice.
Tips on text inputTo insert a number in the letter mode, press and hold the desired number key.
To switch between the lethold .
To switch between the di.
To delete a character, precharacter, press and hold
The most common punctu.
To open a list of special c
Tip! To insert severatime, press when
Write and sendThe appearance of a multdepending on the receivin
Copyright protections ma(including ringing tones),copied, modified, transfer
Before you can create a me-mail, you must have thplace. See ‘Receive MMS ‘E-mail’, p. 51.
44
, write the message. To insert a ions > Insert or Insert object >
ct to a multimedia message, select ject > Image, Sound clip, or Video added, is shown.t in which recorded videos are tings’, p. 23.e or record sound or video for a , select Insert new > Image, clip. To insert a new slide to the
e.timedia message looks like, select
nt to an e-mail, select Options > nd clip, Video clip, or Note. E-mail icated by .er file types as attachments, open pplication, and select Send > Via le., select Options > Send, or press
e sending of text messages beyond single message. Longer messages o or more messages. Your service
cordingly. Characters that use and characters from some
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.
1 Select New message and one of the following:Text msg.—to send a text messageMultimedia message—to send a multimedia message (MMS)E-mail—to send an e-mailIf you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.
2 In the To field, press to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.
3 In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.
4 In the message fieldtemplate, select OptTemplate.
5 To add a media objeOptions > Insert obclip. When sound is To change the formasaved, see ‘Video set
6 To take a new picturmultimedia messageSound clip, or Videomessage, select SlidTo see what the mulOptions > Preview.
7 To add an attachmeInsert > Image, Souattachments are ind
Tip! To send oththe appropriate ae-mail, if availab
8 To send the message.
Your device supports ththe character limit for aare sent as a series of twprovider may charge acaccents or other marks,
Mes
sagi
ng
45ht © 2006 Nokia. All rights reserved.
manuallyools > Settings > Connection > fine the settings for a access point. See ‘Connection’,
essaging > Options > sg. > Access point in use and reated as the preferred Multimedia messages’, p. 50.
ive, retrieve, reply to, and do the following: access point (IAP) correctly. See
ttings correctly. If you select g. main view and have not set up you are prompted to do so. To ail settings with the mailbox e also ‘E-mail’, p. 51.rate e-mail account. Follow the our remote mailbox and Internet
eceive messages
indicates an unread text ultimedia message, data
Copyrig
language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.
E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.
Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See ‘Multimedia messages’, p. 50.
Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See ‘Data and settings’, p. 46.
For availability of and subscription to data services, contact your network operator or service provider. Follow the instructions given by your service provider.
Enter the MMS settings1 Press , and select T
Access points, and demultimedia messagingp. 101.
2 Press , and select MSettings > Multim. mthe access point you cconnection. See also ‘
Before you can send, receforward e-mail, you must• Configure an Internet
‘Connection’, p. 101.• Define your e-mail se
Mailbox in the Messayour e-mail account, start creating the e-mguide, select Start. SeYou must have a sepainstructions given by yservice provider (ISP).
Inbox—r
In the Inbox folder, message, an unread m
46
s that have been included in the lect Options > Objects.
a multimedia presentation, is resentation, select the indicator.
s many kinds of messages that
—You may receive settings from service provider, or company nt department in a configuration ttings, select Options > Save all.
the information to Contacts, select ss card. Certificates or sound files s card are not saved.
the ringing tone, select Options >
the logo shown in the standby work operator’s own identification,
he invitation, select Options >
the bookmark to the bookmarks ns > Add to bookmarks. If the
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
received through infrared, and data received through Bluetooth connectivity.
When you receive a message, and 1 new message are shown in the standby mode. to open the message, select Show. To open a message in Inbox, scroll to it, and press .
To reply to a received message, select Options > Reply.
To print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.
Multimedia messages Important: Exercise caution when opening
messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.
You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.
When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included, or if video is included. To play the sound or the video, select the indicator.
To see the media objectmultimedia message, se
If the message includesdisplayed. To play the p
Data and settingYour device can receivecontain data ( ):
Configuration messageyour network operator, information managememessage. To save the se
Business card—To save Options > Save busineattached to the busines
Ringing tone—To save Save.
Operat. logo—To have mode instead of the netselect Options > Save.
Calen. entry—To save tSave to Calendar.
Web message—To savelist in Web, select Optio
Mes
sagi
ng
47ht © 2006 Nokia. All rights reserved.
ox, the device asks if you want x (Connect to mailbox?).
ox and retrieve new e-mail lect Yes. When you view continuously connected to a ata connection. See also
ed e-mail messages offline, e-mail messages offline, your
o the remote mailbox.
essagesptions > Connect to start a mailbox.
e caution when opening es may contain malicious harmful to your device or PC.
en connection to a remote s > Retrieve e-mail and one of
ew e-mail messagesonly the e-mail messages that
ssages from the mailbox
Copyrig
message contains both access point settings and bookmarks, to save the data, select Options > Save all.
E-mail notif.—The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.
Web service messagesWeb service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.
Mailbox
If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 51.
When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.
Open the mailboxWhen you open the mailbto connect to the mailbo
To connect to your mailbheadings or messages, semessages online, you areremote mailbox using a d‘Connection’, p. 101.
To view previously retrievselect No. When you viewdevice is not connected t
Retrieve e-mail mIf you are offline, select Oconnection to the remote
Important: Exercismessages. E-mail messagsoftware or otherwise be
1 When you have an opmailbox, select Optionthe following:New—to retrieve all nSelected—to retrieve have been markedAll—to retrieve all me
48
age on a compatible Basic Print rinter with Bluetooth connectivity Mobile Printer or HP Photosmart Print.
ssages automaticallytomatically, select Options >matic retrieval > Header bled or Only in home net., and ften the messages are retrieved.
ges automatically may increase e data traffic.
essagesf an e-mail message from the ng it in the remote mailbox, select lete msg. from:, select Phone
-mail headings in the remote delete the message content, the your device. If you want to remove must first delete the e-mail
ote mailbox, and then make a evice to the remote mailbox again
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
To stop retrieving messages, select Cancel.2 After you retrieve the e-mail messages, you can
continue viewing them online, or select Options > Disconnect to close the connection and view the e-mail messages offline.E-mail status indicators:
The new e-mail (offline or online mode) has not been retrieved to your device.
The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not
been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the
message content has been deleted from the device.3 To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.
To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.
You can also receive meeting requests in the mailbox. See ‘Meeting requests’, p. 71, and ‘Create calendar entries’, p. 71.
To print an e-mail messProfile (BPP) equipped p(such as HP Deskjet 4508150), select Options >
Retrieve e-mail meTo retrieve messages auE-mail settings > Autoretrieval > Always enadefine when and how o
Retrieving e-mail messayour call costs due to th
Delete e-mail mTo delete the contents odevice while still retainiOptions > Delete. In Deonly.
The device mirrors the emailbox. Although you e-mail heading stays in the heading as well, youmessage from your remconnection from your dto update the status.
Mes
sagi
ng
49ht © 2006 Nokia. All rights reserved.
y. A list of folders opens.t a folder and OK. To view the lder.
ingsth Must be defined or with a red ctions given by your service tain settings from your service n message.
ers or access points may be your service provider or network t be able to change, create, edit,
sag. > Options > Settings > ollowing:
list of all text message centers
use character conversion to when available, select Reduced
ct which message center is used
Copyrig
To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.
If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.
To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Undelete.
Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.
View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1 In the Messag. main view, select Options > SIM
messages.2 Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3 Select Options > Cop4 To start copying, selec
messages, open the fo
Messaging settFill in all fields marked wiasterisk. Follow the instruprovider. You may also obprovider in a configuratio
Some or all message centpreset for your device by operator, and you may noor remove them.
Text messagesPress , and select MesText msg. and from the f
Message centres—View athat have been defined.
Character encoding— Toanother encoding systemsupport.
Msg. centre in use—Seleto deliver text messages.
50
nt. Select Restricted; the device ing messages that may not be
lect which access point is used as n for the multimedia message
Select how you want to receive o receive multimedia messages ome network, select Aut. in home home network, you receive a s a multimedia message that you imedia message center.
our home network, sending and essages may cost you more.
a retrieval > Always automatic, lly makes an active packet data he message both in and outside
lect whether you want to reject ymous sender.
e whether you want to receive vertisements.
whether you want the status of the wn in the log (network service).
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
Receive report—Select whether the network sends delivery reports on your messages (network service).
Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.
Message sent as—Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.
Preferred conn.—Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See ‘Connection’, p. 101.
Reply via same ctr.—Select whether you want the reply message to be sent using the same text message center number (network service).
Multimedia messagesPress , and select Messag. > Options > Settings > Multimedia message and from the following:
Image size—Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.
MMS creation mode —If you select Guided, the device informs you if you try to send a message that may not be
supported by the recipieprevents you from sendsupported.
Access point in use—Sethe preferred connectiocenter.
Multimedia retrieval—multimedia messages. Tautomatically in your hnetwork. Outside your notification that there ican retrieve in the mult
When you are outside yreceiving multimedia m
If you select Multimediyour device automaticaconnection to retrieve tyour home network.
Allow anon. msgs.—Semessages from an anon
Receive adverts—Definmultimedia message ad
Receive report—Select sent message to be sho
Mes
sagi
ng
51ht © 2006 Nokia. All rights reserved.
ser name, given to you by your
ssword. If you leave this field or the password when you try to ailbox.
er the IP address or host name of ves your e-mail.
ct an Internet access point (IAP).
ame for the mailbox.
e e-mail protocol that your ovider recommends. The options is setting can be selected only ged if you have saved or exited s. If you use the POP3 protocol, pdated automatically when you st e-mail messages, you must
ew connection to your mailbox.
the security option used to the remote mailbox.
e connection.
OP3 only)—Use with the POP3 nding of passwords to the
le connecting to the mailbox.
Copyrig
Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.
Deny report sending—Select whether you want to prevent your device from sending delivery reports of received multimedia messages.
Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.
E-mailPress , and select Messag. > Options > Settings > E-mail and from the following:
Mailboxes—Select a mailbox to change the following settings: Connection settings, User settings, Retrieval settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use for sending e-mail.
To create a new mailbox, select Options > New mailbox in the mailbox main view.
Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:
User name—Enter your uservice provider.
Password—Enter your pablank, you are prompted fconnect to your remote m
Incoming mail serv.—Entthe mail server that recei
Access point in use—SeleSee ‘Connection’, p. 101.
Mailbox name—Enter a n
Mailbox type—Defines thremote mailbox service prare POP3 and IMAP4. Thonce and cannot be chanfrom the mailbox settinge-mail messages are not uare online. To see the latedisconnect and make a n
Security (ports)—Select secure the connection to
Port—Define a port for th
APOP secure login (for Pprotocol to encrypt the seremote e-mail server whi
52
ct whether you want to attach a il messages.
ect whether you want to receive ons, a tone and a note, when new ailbox.
ct another encoding according to
fine which parts of the e-mail are , Partially (kB), Messages (for attachs..
ine how many new e-mail to the mailbox.
r IMAP4 only)—Define the folder bscribed.
r IMAP4 only)—Subscribe to other ailbox and retrieve content from
lelect whether you want to receive e-mail is received in your remote
automatic header retrieval cannot me.
Mes
sagi
ng
Copyright © 2006 Nokia. All rights reserved.
To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.
Outgoing mail serv.—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.
Access point in use—Select an Internet access point (IAP). See ‘Connection’, p. 101.
The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.
User settingsMy name—Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.
Send message—Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.
Send copy to self—Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.
Include signature—Selesignature to your e-ma
New e-mail alerts—Selthe new e-mail indicatimail is received to the m
Default encoding—Selelanguage.
Retrieval settingsE-mail to retrieve—Deretrieved: Headers onlyIMAP4 only), or Msgs. &
Retrieval amount—Defmessages are retrieved
IMAP4 folder path (fopath for folders to be su
Folder subscriptions (fofolders in the remote mthose folders.
Automatic retrievaE-mail notifications—Snotifications when newmailbox.
E-mail notifications andbe active at the same ti
Mes
sagi
ng
53ht © 2006 Nokia. All rights reserved.
hether the device automatically mbers, and saves the new
to the topic list.
saging > Options > Settings > wing:
ect whether you want to save a s, multimedia messages, or e- Sent folder.
ne how many sent messages are at a time. The default limit is 20 t is reached, the oldest message
ory card is inserted in the y where you want to save your y or Memory card.
Copyrig
Header retrieval—Select whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.
Retrieving e-mail messages automatically may increase your call costs due to the data traffic.
Web service messagesPress , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.
Cell broadcastCheck the available topics and related topic numbers with your service provider. Press , and select Messaging > Options > Settings > Cell broadcast and from the following:
Reception—Select whether you want to receive cell broadcast messages.
Language—Select the languages in which you want to receive messages: All, Selected, or Other.
Topic detection—Select wsearches for new topic nunumbers without a name
Other settingsPress , and select MesOther and from the follo
Save sent messages—Selcopy of the text messagemail that you send to the
No. of saved msgs.—Defisaved to the Sent folder messages. When the limiis deleted.
Memory in use—If a memdevice, select the memormessages: Phone memor
54
he search field. Matching contacts . Select the call type Voice call.
acts from your SIM card to n make a call this way. See ‘Copy
x (network service), press and hold e. See also ‘Call divert’, p. 107.
phone number of your voice nd select Tools > Voic. mail > umber. Enter the number
service provider), and select OK.
number in the standby mode, press er you want, and press to call
nce callrst participant.other participant, select Options > all is automatically put on hold.s answered, to join the first nference call, select Options >
Mak
e ca
lls
Copyright © 2006 Nokia. All rights reserved.
Make callsVoice calls
Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the or
keys. To adjust the volume, select Unmute, and press or .
You can make voice calls in the Fold open mode and View mode. See ‘Modes’, p. 9. 1 To start a voice call, in the Fold open mode, enter the
phone number in the standby mode, including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.
2 Press to call the number.3 Press to end the call (or to cancel the call
attempt).
Pressing always ends a call, even if another application is active.
To make a call from Contacts, press , and select Contacts. Scroll to the desired name, or enter the first
letters of the name to tare listed. To call, press
You must copy the contContacts before you cacontacts’, p. 65.
To call your voice mailbo in the standby mod
Tip! To change themailbox, press , aOptions > Change n(obtained from your
To call a recently dialed . Scroll to the numb
the number.
Make a confere1 Make a call to the fi2 To make a call to an
New call. The first c3 When the new call i
participant in the coConference.
Mak
e ca
lls
55ht © 2006 Nokia. All rights reserved.
de, press the speed dial key and
anced voice commands. s are not dependent on the
ot record voice tags in advance. s a voice tag for the entries in he spoken voice tag to it. The evice adapts to the main user’s ice commands better.
ct is the name or nickname that ard. To listen to the synthesized card, and select Options > Play
oice tagags may be difficult in a noisy an emergency, so you should ice dialing in all circumstances.
g, the loudspeaker is in use. Hold ance away when you say the
in the standby mode, press and sing a compatible headset with
Copyrig
To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. When you finish the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop.
4 To end the active conference call, press .
Speed dial a phone numberTo activate speed dialing, press , and select Tools > Settings > Call > Speed dialling > On.
To assign a phone number to one of the speed dialing keys ( — ), press , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox.
To call in the standby mo.
Voice dialingYour device supports enhEnhanced voice commandspeaker’s voice; you do nInstead, the device createcontacts, and compares tvoice recognition in the dvoice to recognize the vo
The voice tag for a contais saved on the contact cvoice tag, open a contactvoice tag.
Make a call with a vNote: Using voice t
environment or duringnot rely solely upon vo
When you use voice dialinthe device at a short distvoice tag.1 To start voice dialing,
hold . If you are u
56
video image captured by the shown to the video call recipient.
eo call, you must have a USIM card f a UMTS network. For availability ideo call services, contact your vice provider. A video call can only arties. The video call can be made hone or an ISDN client. Video calls ere is another voice, video, or data
ng video (the recipient is not twork is not transmitting it). ideo sending from your device. To d, see ‘Call settings’, p. 100. in the er the e lect tact.ll >
ctivate e call he call.
Mak
e ca
lls
Copyright © 2006 Nokia. All rights reserved.
the headset key, press and hold the headset key to start voice dialing.
2 A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.
3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 2.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing.
If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business).
Video callsYou can make video calls in the Fold open mode and View mode. See ‘Modes’, p. 9.
For hands-free video calls, use the View mode.
When you make a video call, you can see a real-time, two-way video between you and the recipient of the call.
The live video image, orcamera in your device is
To be able to make a vidand be in the coverage oof and subscription to vnetwork operator or serbe made between two pto a compatible mobile pcannot be made while thcall active.
Icons: You are not receivi
sending video or the ne You have denied v
send a still image instea1 To start a video call,
Fold open mode, entphone number in thstandby mode, or seContacts and a con
2 Select Options > CaVideo call.
If you want to make a hands-free video call, athe View mode after threcipient has answered t
Mak
e ca
lls
57ht © 2006 Nokia. All rights reserved.
(network service)d live video or a video clip from ther compatible mobile device
y invite a recipient to view the you want to share. Sharing n the recipient accepts the te the correct mode. See ‘Share
uirementsquires a 3G Universal Mobile em (UMTS) connection, your ng depends on 3G network service provider for questions y and fees associated with using ideo sharing you must:ring is installed on your Nokia
e is set up for person-to-person ings’, p.58.tive UMTS connection and are
coverage. See ‘Settings’, p. 58. If session while you are within ge and a handover to GSM ssion is discontinued, but your
Copyrig
Starting a video call may take a while. Waiting for video image is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead.
The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you hear the sound and may see a still image or a grey background graphic.
Tip! To increase or decrease the volume during a call, scroll left or right.
To change between showing video or hearing only sound, select Enable/Disable > Sending video, Sending audio, or Sending audio & video.
To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display.
To switch the places of the sent and received video images on the display, select Change image order.
Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider.
To end the video call, press .
Video sharing Use Video sharing to senyour mobile device to anoduring a voice call. Simpllive video, or a video clip begins automatically wheinvitation, and you activavideo’, p. 58.
Video sharing reqBecause Video sharing reTelecommunications Systability to use Video shariavailability. Contact yourabout network availabilitthis application. To use V• Ensure that Video sha
N93.• Ensure that your devic
connections. See ‘Sett• Ensure you have an ac
within UMTS networkyou start the sharing UMTS network coveraoccurs, the sharing sevoice call continues.
58
name (you can use an IP address e).
ings
nnection, do the following: provider to establish an o use the UMTS network.ice UMTS access point connection red properly. For help, see .
sion, the recipient must install igure the required settings on their the recipient must both be before you can start sharing.
ons, you must be registered to the UMTS connection, and be within rage.
active, select Options > Share
invitation to the SIP address you ontact card of the recipient.
Mak
e ca
lls
Copyright © 2006 Nokia. All rights reserved.
• Ensure that both the sender and recipient are registered to the UTMS network. If you invite someone to a sharing session and that person’s phone is turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation.
SettingsPerson-to-person connection settings
A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible phone. The SIP profile must also be established to receive a sharing session.
Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air.
If you know a recipient’s SIP address, you can enter it on your contact card for that person. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options > Add detail > SIP. Enter the SIP address in the format
sip:username@domaininstead of a domain nam
UTMS connection sett
To set up your UMTS co• Contact your service
agreement for you t• Ensure that your dev
settings are configu‘Connection’, p. 101
Share videoTo receive a sharing sesVideo sharing and confmobile device. You and registered to the service
To receive share invitatiservice, have an active the UMTS network cove
Live video1 When a voice call is
video > Live.2 The phone sends the
have added to the c
Mak
e ca
lls
59ht © 2006 Nokia. All rights reserved.
eral SIP addresses in the contact dress to which you want to send lect to send the invitation. e recipient is not available, enter K to send the invitation.
atically when the recipient . the sharing session. Select o resume sharing.sion, select Stop. To end the d key.
ion a share invitation, an invitation
wing the sender’s name or SIP not set to Silent, it rings when
hare invitation and you are not erage, you will not know that .
tation, you can select:haring session. If the sender eo, activate the View mode.
invitation. The sender receives a cted the invitation. You can also
Copyrig
If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation.
3 Sharing begins automatically when the recipient accepts the invitation.The loudspeaker is active. You can also use a headset to continue your voice call while you share live video.
4 Select Pause to pause the sharing session. Select Continue to resume sharing.
5 To end the sharing session, select Stop. To end the voice call, press the end key.
Video clip1 When a voice call is active, select Options > Share
video > Clip.A list of video clips opens.
2 Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play.
3 Select Options > Invite.You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK.The phone sends the invitation to the SIP address you have added to the contact card of the recipient.
If the recipient has sevcard, select the SIP adthe invitation, and SeIf the SIP address of tha SIP address. Select O
4 Sharing begins automaccepts the invitation
5 Select Pause to pauseOptions > Continue t
6 To end the sharing sesvoice call, press the en
Accept an invitatWhen someone sends youmessage is displayed shoaddress. If your device is you receive an invitation.
If someone sends you a swithin UMTS network covyou received an invitation
When you receive an invi• Accept to begin the s
wants to share live vid• Reject to decline the
message that you reje
60
ll during a video call, the video call is not available during a video call.
t a video calls, is displayed.
n a ringing tone for video calls. Tools > Profiles, a profile, and se > Video call tone.
press to answer the video call.
ctivate the View mode, and a live ideo clip, or the image being in your device is shown to the nd a live video image, turn the tion from which you want to send do not activate the View mode, ssible, but you can still hear the een is shown in place of the video. en with a still image, see ‘Call o call, p. 100.
have denied video sending during is still charged as a video call. th your network operator or service
the View mode or in the Fold open
Mak
e ca
lls
Copyright © 2006 Nokia. All rights reserved.
press the end key to decline the sharing session and disconnect the voice call.
To end the sharing session, select Stop. If you share a video clip, select Exit. Video sharing ended is displayed.
Answer or reject a callTo answer the call in the Fold open mode, press . If Anykey answer is set to On, to answer a call in the Fold closed mode, open the fold, and the call starts automatically. Otherwise, open the fold, and press .
To mute the ringing tone when a call comes in, select Silence.
Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key.
If you do not want to answer a call, in the Fold open mode, press to reject it. The caller hears a line busy tone. If you have activated the Call divert > If busy function to divert calls, rejecting an incoming call also diverts the call. See ‘Call divert’, p. 107.
When you reject an incoming call in the Fold open mode, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send msg.. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 100.
If you answer a voice cais dropped. Call waiting
Answer or rejecWhen a video call arrive
Tip! You can assigPress and select Options > Personali
In the Fold open mode,
To start sending video, avideo image, recorded vcaptured by the cameracaller. If you want to secamera unit to the directhe video image. If you video sending is not poother person. A grey scrTo replace the grey scresettings’, Image in vide
Note: Even if youa video call, the callCheck the pricing wiprovider.
To end the video call, inmode, press .
Mak
e ca
lls
61ht © 2006 Nokia. All rights reserved.
he message and change the Press to send the file to a
F tone strings, for example, a F string or search for it in character (w) or a pause
epeatedly. Select OK to send the
MF tones to the Phone number ntact card.
video callideo call for the following e (audio in the Fold open mode; e View mode); Activate handset th connectivity is attached);
vate handsfree (Fold open mode h Bluetooth connectivity is l; Change image order Zoom in/ly); and Help.
Copyrig
Call waiting (network service)You can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Call > Call waiting.
To answer the waiting call, press . The first call is put on hold.
To switch between the two calls, select Swap. Select Options > Transfer to connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls. To end the active call, press . To end both calls, select Options > End all calls.
Options during a voice callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following:
Replace—To end an active call and replace it by answering the waiting call.
Send MMS (in UMTS networks only)—To send an image or a video in a multimedia message to the other participant
of the call. You can edit trecipient before sending. compatible device.
Send DTMF—To send DTMpassword. Enter the DTMContacts. To enter a waitcharacter (p), press rtone.
Tip! You can add DTor DTMF fields in a co
Options during aSelect Options during a voptions: Enable or Disablvideo, audio, or both in th(if a headset with BluetooActivate loudsp.; or Actionly, and if a headset witattached); End active calZoom out (View mode on
62
call duration while a call is active, Options > Settings > Show call
time invoiced for calls by your vary, depending on network ff for billing, and so forth.
mers, select Options > Clear d the lock code; see ‘Security’, .
data sent and received during s, press , and select My own > example, you may be charged for ctions by the amount of data sent
munication events
ation events
Mak
e ca
lls
Copyright © 2006 Nokia. All rights reserved.
Log
Recent calls To monitor the phone numbers of missed, received, and dialed calls, press , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area.
Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .
To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press .
Call duration To monitor the approximate duration of your incoming and outgoing calls, press , and select My own > Log > Call duration.
To set the display of theselect Connect. > Log >duration > Yes or No.
Note: The actualservice provider mayfeatures, rounding o
To clear call duration titimers. For this you nee‘Phone and SIM’, p. 104
Packet dataTo check the amount ofpacket data connectionLog > Packet data. Foryour packet data conneand received.
Monitor all comIcons in Log:
Incoming Outgoing Missed communic
Mak
e ca
lls
63ht © 2006 Nokia. All rights reserved.
onfirm. To remove a single event
elect Options > Settings > Log remain in the phone memory for r which they are automatically you select No log, all the log ister, and messaging delivery eleted.
ommunication event, in the an event, and press the scroll
ew, to copy a phone number to ptions > Copy Number.
connection timer: To view how ilobytes, is transferred and how a connection lasts, scroll to an nt indicated by Pack., and select
Copyrig
To monitor all voice and video calls, text messages, or data connections registered by the device, press , select My own > Log, and scroll to the right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information.
Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes.
Tip! To view a list of sent messages, press , and select Messaging > Sent.
Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options >
Clear log. Select Yes to cfrom the log, press .
To set the Log duration, sduration. The log events a set number of days afteerased to free memory. Ifcontents, recent calls regreports are permanently d
To view the details of a cgeneral log view, scroll tokey.
Tip! In the details vithe clipboard, select O
Packet data counter andmuch data, measured in klong a certain packet datincoming or outgoing eveOptions > View details.
64
t contact cards, use Nokia Contacts okia PC Suite.
nail image to a contact card, open lect Options > Edit > Options > mbnail image is shown when the
is a quick way to call frequently an assign speed dialing keys to s. See ‘Speed dial a phone number’,
ct information, select the card you Options > Send > Via text edia, Via Bluetooth, or Via
ging’, p. 41 and ‘Send data using ity’, p. 82.
roup, select Options > Add to ou have created a group). See , p. 66.
ontacts, groups, and the available lect Options > Contacts info.
Cont
acts
(Ph
oneb
ook)
Copyright © 2006 Nokia. All rights reserved.
Contacts (Phonebook)Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 46. Contact information can only be sent to or received from compatible devices.
Save names and numbers1 Select Options > New contact.2 Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit.
Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.
To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete.
Tip! To add and ediEditor available in N
To attach a small thumbthe contact card, and seAdd thumbnail. The thucontact calls.
Tip! Speed dialing used numbers. You ceight phone numberp. 55.
Tip! To send contawant to send. Selectmessage, Via multiminfrared. See ‘MessaBluetooth connectiv
To add a contact to a ggroup: (shown only if y‘Create contact groups’
To view the amount of cmemory in Contacts, se
Cont
acts
(Ph
oneb
ook)
65ht © 2006 Nokia. All rights reserved.
onize your contacts to a okia PC Suite.
d other SIM servicesation on using SIM card card vendor. This may be the
operator, or other vendor.
tacts > Options > SIM y to see the names and numbers the SIM directory you can add, ontacts, and you can make calls.
aling numbers, select Options > alling contacts. This setting is y your SIM card.
r device to selected phone > Activ. fixed dialling. To add dialing list, select Options > eed the PIN2 code for these
ing, packet data connections are sending text messages over a n this case, the message center ’s phone number must be ling list.
Copyrig
Default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1 In the address book, select a contact, and press .2 Select Options > Defaults.3 Select a default to which you want to add a number or
an address, and select Assign.4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact card.
Copy contactsTo copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied.
Tip! You can synchrcompatible PC with N
SIM directory anFor availability and informservices, contact your SIMservice provider, network
Press , and select Concontacts > SIM directorstored on the SIM card. Inedit, or copy numbers to c
To view the list of fixed diSIM contacts > Fixed dionly shown if supported b
To restrict calls from younumbers, select Optionsnew numbers to the fixedNew SIM contact. You nfunctions.
When you use Fixed diallnot possible, except whenpacket data connection. Inumber and the recipientincluded on the fixed dia
66
select Options > Add members.nd press to mark it. To add
t a time, repeat this action on all nt to add.e contacts to the group.
ct Options > Rename, enter the K.
rs from a groupen the group you want to modify.
t, and select Options > Remove
e the contact from the group.hich groups a contact belongs, , and select Options > Belongs to
Cont
acts
(Ph
oneb
ook)
Copyright © 2006 Nokia. All rights reserved.
When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.
Add ringing tones for contactsWhen a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).1 Press to open a contact card or go to the groups
list, and select a contact group.2 Select Options > Ringing tone. A list of ringing tones
opens.3 Select the ringing tone you want to use for the
individual contact or the selected group.
You can also use a video clip as a ringing tone.
To remove the ringing tone, select Default tone from the list of ringing tones.
Create contact groups1 In Contacts, press to open the groups list.2 Select Options > New group. 3 Write a name for the group or use the default name
Group %N, and select OK.
4 Open the group, and5 Scroll to a contact, a
multiple members athe contacts you wa
6 Select OK to add th
To rename a group, selenew name, and select O
Remove membe1 In the groups list, op2 Scroll to the contac
from group.3 Select Yes to remov
Tip! To check to wscroll to the contactgroups.
Web
67ht © 2006 Nokia. All rights reserved.
s > Settings > Connection > fine the settings for an access uctions given to you by your Connection’, p. 101.ervices > Options > Bookmark mark. Write a name for the ress of the page defined for the
ess point as the default access > Settings > Access point.
ws when you open Services.
e bookmarks loaded for sites not ia does not warrant or endorse
to access them, you should take security or content, as you site.
page defined for the default
Copyrig
WebVarious service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.
Press , and select Services.
Shortcut: To start a connection, press and hold in the standby mode.
Web access pointTo access pages, you need Web service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See ‘Data and settings’, p. 46. For more information, contact your network operator or service provider.
Tip! Settings may be available on the Web site of a network operator or service provider.
Enter settings manually1 Press , select Tool
Access points, and depoint. Follow the instrservice provider. See ‘
2 Press , and select Smanager > Add bookbookmark and the addcurrent access point.
3 To set the created accpoint, select Options
Bookmarks vieThe bookmarks view open
Your device may have somaffiliated with Nokia. Nokthese sites. If you choosethe same precautions, forwould with any Internet
indicates the startingaccess point.
68
links appear underlined in blue nks in purple. Images that act as around them.
selections, press .
to jump to the end of a page and g of a page.
ge while browsing, select Back. If lect Options > Navigation w a chronological list of the pages wsing session.
ntent from the server, select options > Reload.
ect Options > Save as bookmark.
bookmarks view while browsing, o return to the browser view, select age.
wsing, select Options > Advanced ou can save pages to the device d (if inserted), and browse them the pages later, press in the the Saved pages view.
ress, select Options > Navigation ddress.
Web
Copyright © 2006 Nokia. All rights reserved.
Connection securityIf the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.
The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.
Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.
Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also ‘Certif. management’, p. 106.
Browse Important: Use only services that you trust and that
offer adequate security and protection against harmful software.
To download a page, select a bookmark, or enter the address in the field ( ).
On a browser page, newand previously visited lilinks have a blue border
To open links and make
Shortcut: Use to the beginnin
To go to the previous paBack is not available, seoptions > History to vieyou visited during a bro
To retrieve the latest coOptions > Navigation
To save a bookmark, sel
Tip! To access the press and hold . TOptions > Back to p
To save a page while brooptions > Save page. Ymemory or memory carwhen offline. To accessbookmarks view to open
To enter a new URL addoptions > Go to web a
Web
69ht © 2006 Nokia. All rights reserved.
wnloaded photo can be saved in
stall and use applications and ces that offer adequate security rmful software.
, scroll to the link, and press . option to purchase the item, for
information provided.oad, select Accept. To cancel the cel.
ond view the browser page offline, ed options > Disconnect, or to lose the browser, select
es you have accessed are stored he device.
tion that is used to store data ried to access or have accessed requiring passwords, empty the information or services you have
Copyrig
To open a sublist of commands or actions for the currently open page, select Options > Service options.
You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press .
When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options > Tools > Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads.
Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.
Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your
device, for example, a doGallery.
Important: Only inother software from sourand protection against ha
1 To download the item2 Select the appropriate
example, “Buy”.3 Carefully read all the
To continue the downldownload, select Can
End a connectiTo end the connection anselect Options > Advancend the connection and cOptions > Exit.
Empty the cacheThe information or servicin the cache memory of t
A cache is a memory locatemporarily. If you have tconfidential information cache after each use. The
70
Web page that is downloaded tion options > Open search page or when browsing.
e browser to play sounds s, select a volume level.
the page layout shown as hen in the Small screen mode, do not want external cascading loaded, select By speed.
ble the receiving and sending of
ble or disable the use of scripts.
e or show security notifications.
elect whether you want to confirm DTMF tones during a voice call. See oice call’, p. 61.
Web
Copyright © 2006 Nokia. All rights reserved.
accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache.
Web settingsSelect Options > Settings and from the following:
Access point—Change the default access point. See ‘Connection’, p. 101. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.
Load imgs. & sounds—Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images.
Font size—Select the text size.
Default encoding—If text characters are not shown correctly, you can select another encoding according to language.
Auto. bookmarks—Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.
Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.
Homepage—Define the home page.
Search page—Define a when you select Navigain the bookmarks view,
Volume—If you want thembedded on Web page
Rendering—If you wantaccurately as possible wselect By quality. If youstyle sheets to be down
Cookies—Enable or disacookies.
Java/ECMA script—Ena
Security warnings—Hid
Conf. DTMF sending—Sbefore the device sends also ‘Options during a v
Cale
ndar
71ht © 2006 Nokia. All rights reserved.
d you of birthdays or special ated every year) of a task that needs doing by a
t an alarm, select Alarm > On, ime and Alarm date.
or an appointment or a meeting, description.ct Done.
s for a note, select Silence to m tone. The reminder text stays calendar alarm, select Stop. To elect Snooze.
nize your calendar with a okia PC Suite. When creating a desired Synchronisation
stsequest to the mailbox in your d to the calendar when you open
Copyrig
CalendarUse Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes.
Create calendar entries Shortcut: In the day, week, or month calendar view,
press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.
1 Press , and select Calendar > Options > New entry and one of the following:Meeting—to remind you of an appointment that has a specific date and timeMeeting request—to send a meeting request by e-mail (a mailbox must be defined in the device)Memo—to write a general entry for a day
Anniversary—to remindates (entries are repeTo-do—to remind youspecific date
2 Fill in the fields. To seand enter the Alarm tTo add a description fselect Options > Add
3 To save the entry, sele
When the calendar alarmturn off the calendar alaron the screen. To end theset the alarm to snooze, s
Tip! You can synchrocompatible PC using Ncalendar entry, set theoption.
Meeting requeIf you receive a meeting rdevice, the request is savethe e-mail.
72
calendar entries Calendar saves space in your
e event at a time, go to the month s > Delete entry > Before date or
leted, scroll to it in the to-do view, ark as done.
ings alarm tone, Default view, Week itle, and select Options > Settings.
Cale
ndar
Copyright © 2006 Nokia. All rights reserved.
You can view received meeting requests in the mailbox or in the calendar. To respond to a meeting request using e-mail, select Options > Respond.
Calendar views Tip! Select Options > Settings to change the
starting day of the week or the view that is shown when you open the calendar.
In the month view, dates that have calendar entries are marked with a small triangle in the bottom right corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press .
To go to a certain date, select Options > Go to date. To jump to today, press .
To send a calendar note to a compatible device, select Options > Send.
To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.
Manage your Deleting past entries indevice memory.
To delete more than onview, and select OptionAll entries.
To mark a task as compand select Options > M
Calendar settTo modify the Calendarstarts on, Week view t
My
own
73ht © 2006 Nokia. All rights reserved.
to the Visual Radio service, the ns in your area may not support
adio service may not be available .
an antenna other than the A compatible headset or attached to the device for the erly.
o with the built-in loudspeaker When using the loudspeaker, in the device. The lead of the antenna of the radio, so let it
music at a moderate level. o high volume may damage your e device near your ear when the
because the volume may be
swer an incoming call while radio is turned off when there is all is finished, the radio is turned
Copyrig
My ownVisual Radio (network service)
You can use the Visual Radio application as a traditional FM radio with automatic tuning and saved stations. If you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.
To use the Visual Radio service, the following conditions are required:• The device must be switched on.• The device must have a valid SIM card inserted.• The station you listen to and the network operator you
use must support this service.• An Internet access point must be defined to access the
operator’s visual radio server. See ‘Access points’, p. 101.
• The station must have the correct Visual Radio service ID defined and Visual Radio service enabled. See ‘Saved stations’, p. 75.
If you do not have accessoperators and radio statioVisual Radio. The Visual Rin all areas and countries
The FM radio depends onwireless device antenna. enhancement needs to beFM radio to function prop
You can listen to the radior a compatible headset. keep the headset pluggedheadset functions as the hang freely.
Warning: Listen toContinuous exposure thearing. Do not hold thloudspeaker is in use, extremely loud.
You can make a call or anlistening to the radio. Thean active call. When the cback on.
74
ed list,
t of ect e
y radio nd, in
.
entd costs, and to subscribe to the twork operator or service provider.
content for a tuned station, select view, select Options > Station > the visual service ID has not been ter it, or select Retrieve to search ctory (network service).
the visual service is established, urrent visual content designed by
My
own
Copyright © 2006 Nokia. All rights reserved.
The radio selects the used frequency band based on the country information received from the network.
Visual Radio can be used for listening when the device cover is closed. Channel information may be displayed on the cover display. To mute or unmute the radio, press the cover key.
Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.
Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press , and select My own > Radio.
To start a station search, select or . Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning.
If you have previously saved radio stations, select or to go to the next or previous saved station. To select
the memory location of a station, press the corresponding number key.
To adjust the volume, press or . To listen to the radio using the loudspeaker, select Options > Activate loudspeaker.
To view available stations based on location, select Options > Station directory (network service).
To save the current tunstation to your station select Options > Save station. To open the lisyour saved stations, selOptions > Stations. Se‘Saved stations’, p. 75.
To return to the standbmode and leave the FMplaying in the backgrouselect Options > Play background, or press
View visual contTo check availability anservice, contact your ne
To view available visual, or in the stations
Start visual service. If saved for the station, enfor it in the station dire
When the connection tothe display shows the cthe content provider.
My
own
75ht © 2006 Nokia. All rights reserved.
er
own > RealPlyr.. With RealPlyr., r stream media files over the air. ing link when you browse Web
evice memory or a compatible .
w video clips or streaming links her compatible UPnP devices, hrough wireless LAN. See ‘View
ith extensions such as .3gp, alPlyr. does not necessarily
all the variations of file formats. empts to open all .mp4 files, but de content that is not compliant , therefore, is not supported by
ored in device memory or on the ed), select Options > Open and
play one of the last six files
Copyrig
To adjust display settings for the visual content view, select Options > Display settings > Lighting or Power saver time-out.
Saved stationsYou can save up to 20 radio stations in Visual Radio. To open your station list, select Options > Stations.
To listen to a saved station, select Options > Station > Listen. To view available visual content for a station with Visual Radio service, select Options > Station > Start visual service.
To change station details, select Options > Station > Edit.
SettingsSelect Options > Settings and from the following:
Start-up tone—To select a tone to play when the application is started.
Auto-start service—To have the Visual Radio service start automatically when you select a saved station that offers visual service, select Yes.
Access point—To select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.
RealPlay
Press , and select My you can play video clips oYou can activate a streampages, or store it in the dmemory card (if inserted)
Tip! You can also viein your device with otsuch as a TV or a PC, tmedia files’, p. 88.
RealPlyr. supports files w.mp4, or .rm. However, Resupport all file formats orFor example, RealPlyr. attsome .mp4 files may incluwith 3GPP standards andthis device.
Play video clips1 To play a media file st
memory card (if insertfrom the following:Most recent clips—toplayed in RealPlyr.
76
nt. The content is not saved in your
yer settingsyr. settings in a special text ork operator or service provider. p. 46. For more information, perator or service provider.
yer settingsgs and from the following:
r. automatically repeat video clips .
hether to use a proxy server, ss point, and set the port range Contact your service provider for
xy server, select Yes.
ter the IP address of the proxy
ter the port number of the proxy
are intermediate servers between eir users. Some service providers
My
own
Copyright © 2006 Nokia. All rights reserved.
Saved clip—to play a file saved in GallerySee ‘Gallery’, p. 29.
2 Scroll to a file, and press to play the file.
Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode.
Shortcuts during play:• To fast forward, press and hold .• To rewind through the media file, press and hold .• To mute the sound, press and hold until is
displayed. To turn on the sound, press and hold until you see .
Stream content over the airMany service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.
The access points may be configured when you first start your device.
Contact your service provider for more information.
In RealPlyr., you can only open an rtsp:// URL address. However, RealPlyr. recognizes an http link to a .ram file.
To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and
starts loading the contedevice.
Receive RealPlaYou may receive RealPlmessage from the netwSee ‘Data and settings’,contact your network o
Change the RealPlaSelect Options > Settin
Video—to have RealPlyafter they finish playing
Connection—to select wchange the default acceused when connecting. the correct settings.
Proxy sett.:
Use proxy—To use a pro
Proxy serv. address—Enserver.
Proxy port number—Enserver.
Glossary: Proxy servers media servers and th
My
own
77ht © 2006 Nokia. All rights reserved.
esown > Flash Player. Scroll right.
flash file, scroll to it, and press
mpatible device, scroll to it, and
ther folder, select Organise >
other folder, select Organise >
nize your flash files, select
y vary.
ll to it, and press .
own > Flash Player. Scroll to a
the following:
available in all flash files.ayback.ack.
Copyrig
use them to provide additional security or speed up access to browser pages that contain sound or video clips.
Netw. sett.:
Default access point—Scroll to the access point you want to use to connect to the Internet, and press .
Online time—Set the time for RealPlyr. to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK.
Lowest UDP port—Enter the lowest port number of the server’s port range. The minimum value is 1024.
Highest UDP port—Enter the highest port number of the server’s port range. The maximum value is 65535.
Select Options > Advanced settings to edit the bandwidth values for different networks.
Flash Player
With Flash Player, you can view, play, and interact with flash files made for mobile devices.
Organise flash filPress , and select My
To open a folder or play a.
To send a flash file to a copress .
To copy a flash file to anoCopy to folder.
To move a flash file to anMove to folder
To create a folder to orgaOrganise > New folder.
The available options ma
To delete a flash file, scro
Play flash filesPress , and select Myflash file and press .
Select Options and from
Note: Options may not be• Pause to pause the pl• Stop to stop the playb
78
or main view, select the videos and create a muvee with and select uvee, or open the Images & video lect the video clips and images you vee with and select Options > e. muvee from the style list. Movie
usic and text associated with the
e.
tomatically and a Preview view is t Save to save the muvee in the uffle the media files and create a ck to select a different style for so select Customise to change the ate a custom muvee to which you and text.
muveer main view, select the videos and
create a muvee with and select uvee, or select the Images & video lect the videos and images you vee with and select Options > e.
My
own
Copyright © 2006 Nokia. All rights reserved.
• Volume to adjust the playback volume. To increase or decrease the volume scroll left or right.
• Quality to select the playback quality.If the playback appears uneven and slow, change the Quality setting to Normal or Low.
• Full screen to play the file using the entire display. To return to the normal screen, select Normal screen.Even though not visible in full screen, the key functions may still be available when you press either key below the display.
• Fit to screen to play the file in its original size after zooming it.
• Pan mode on to be able to move around the display with the scroll key when you have zoomed in.
The available options may vary.
Movie director
Press , and select My own > Movie, or launch it from the gallery. Muvees are styled video clips that can contain videos, images, music, and text. The style determines the transitions, visual effects, graphics, music, and text that are used in the muvee.
Create muvees1 In the Movie direct
images you want toOptions > Create mfolder in Gallery. Sewant to create a muEdit > Create muve
2 Select a style for thedirector uses the mchosen style.
3 Select Create muve
The muvee is created audisplayed. You can selecGallery, Recreate to shnew muvee, or press Bayour muvee. You can almuvee settings and crecan add images, music,
Create a custom1 In the Movie directo
images you want toOptions > Create mfolder in Gallery. Sewant to create a muEdit > Create muve
My
own
79ht © 2006 Nokia. All rights reserved.
matically and a Preview muvee select Save to save the muvee
to shuffle the media files and ustomise to return to the muvee
wn and a game. For instructions , select Options > Help.
Copyrig
2 Select a style for the muvee from the style list. In the style view, select Options > Customise. Select from the following:Music—to select a music clip from the list.Message—to edit the Opening message and Closing message.Videos & Images—select from the following:• Add/Remove to add or remove video clips and
images, or Add/Remove > Capture to open the camera application to capture new video clips and images.
• Move to reorder the position of video clips and images in the custom muvee.
• Select contents to select video segments to include/exclude in the muvee.
• Length—to define the duration of the muvee, select User defined. Select Multimedia message, Same as music, or Auto-select. If the muvee duration is less than the music duration, the muvee is repeated to match the music duration. If the muvee duration is longer than the music duration, the music is repeated to match the muvee duration.
Settings—to change the settings for muvee production. Select from the following:• Memory in use—select where to store your muvees.• Resolution—select the resolution of your muvees.• Default muvee name—set a default name for the
muvees.
3 Select Create muvee.
The muvee is created autoview is displayed. You canin the Gallery, Recreate create a new muvee, or Csettings.
GamesPress , and select My oon how to play the game
80
aging Profile, SIM Access profile, evice Profile. To ensure n other devices supporting se Nokia approved enhancements ith the manufacturers of other eir compatibility with this device.
corresponds to a service or a s how different devices connect. dsfree Profile is used between the
d the phone. For devices to be st support the same profiles.
s on using Bluetooth technology in ith your local authorities or service
h technology, or allowing such ackground while using other emand on battery power and
ed, you cannot use Bluetooth ity’, p. 104 for more information on
Conn
ectiv
ity
Copyright © 2006 Nokia. All rights reserved.
ConnectivityBluetooth connectivity
You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print. See ‘Image print’, p. 39.
Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Basic Printing Profile, Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imand Human Interface Dinteroperability betweeBluetooth technology, ufor this model. Check wdevices to determine th
Glossary: A profile function, and defineFor example, the Hanhandsfree device ancompatible, they mu
There may be restrictionsome locations. Check wprovider.
Features using Bluetootfeatures to run in the bfeatures, increase the dreduce the battery life.
When the device is lockconnectivity. See ‘Securlocking the device.
Conn
ectiv
ity
81ht © 2006 Nokia. All rights reserved.
sscode, and set the other device vices’, p. 82. Activate the remote device.
de is on in your Nokia N93, in the standby mode. The s network is turned off, as nal strength indicator area, and
services or features requiring . However, a wireless LAN e during the remote SIM mode.
mote SIM mode, you cannot alls with your device, except mergency numbers, or use other etwork coverage. To make calls, remote SIM mode. If the device the lock code.
ode, press the power key, and de.
luetooth connectivity, select hone's visibility > Hidden.
own device.
Copyrig
SettingsPress , and select Connect. > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection.
My phone's visibility—To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.
Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When
pairing, use a 16-digit paas authorized. See ‘Pair deSIM mode from the other
When the remote SIM moRemote SIM is displayedconnection to the wirelesindicated by in the sigyou cannot use SIM cardcellular network coverageconnection remains activ
Warning: In the remake or receive any cmake calls to certain efeatures that require nyou must first exit thehas been locked, enter
To exit the remote SIM mselect Exit rem. SIM mo
Security tipsWhen you are not using BBluetooth > Off or My p
Do not pair with an unkn
82
n has been established, Sending
ag. does not store messages sent tivity.
ng for devices, some devices may e address (device address). To find f your device, enter the code dby mode.
ces view ( ), in the Bluetooth press .
our own passcode (1—16 digits), er of the other device to use the do not have a user interface have
The passcode is used only once.
lect Options > New paired device. luetooth technology within range isplay. Select the device, and enter passcode must be entered on the ter pairing, the device is saved to .
ated by in the device search.
rized or unauthorized, scroll to a the following options:
Conn
ectiv
ity
Copyright © 2006 Nokia. All rights reserved.
Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same time.
Bluetooth connectivity indicators• When is shown in the standby mode, Bluetooth
connectivity is on.• When is blinking, your device is trying to connect
with another device.• When is shown continuously, data is being
transmitted using Bluetooth connectivity.1 Open the application where the item you want to send
is stored. For example, to send an image to another compatible device, open Gallery.
2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display.Device icons are: computer, phone, audio or video device, and other device.To interrupt the search, select Stop.
3 Select the device with which you want to connect.4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 82.
5 When the connectiodata is shown.
The Sent folder in Messusing Bluetooth connec
Tip! When searchishow only the uniquthe unique address o*#2820# in the stan
Pair devicesTo open the paired deviapplication main view,
Before pairing, create yand agree with the ownsame code. Devices thata factory-set passcode.
To pair with a device, seDevices with wireless Bstart to appear on the dthe passcode. The sameother device as well. Afthe paired devices view
Paired devices are indic
To set a device as authodevice, and select from
Conn
ectiv
ity
83ht © 2006 Nokia. All rights reserved.
oth connectivityonnectivity, select Bluetooth >
connection
ansfer data such as business d media files with a compatible
(IR) beam at anyone's eye or other IR devices. This device is a
sing infrareded ports of the sending and pointing at each other, and that ons between the devices. The tween the two devices is up to 1
ing device activates the infrared
d port of your device to receive , press , and select
g device selects the desired tart the data transfer.
Copyrig
Set as authorised—Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorised—Connection requests from this device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.
Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off.
Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 45.
Switch off BluetoTo switch off Bluetooth cOff.
Infrared
With infrared, you can trcards, calendar notes, andevice.
Do not point the infraredallow it to interfere with Class 1 laser product.
Send and receive data u1 Ensure that the infrar
receiving devices are there are no obstructipreferable distance bemeter (3 feet).
2 The user of the receivport.To activate the infraredata through infraredConnect. > Infrared.
3 The user of the sendininfrared function to s
84
s with a variety of PC connectivity ns applications. With Nokia PC ple, transfer images between your e PC.
ection from the PC to synchronize
modem as a modem to send and receive the Internet with a compatible PC nectivity, infrared, or a USB data ion instructions can be found in the Suite.
kia PC Suite for the first time, to to a compatible PC and to use he Get Connected wizard available
ion manager
nnect. > Conn mgr. To view the ns or end connections in GSM and less LAN, select Act. data conn..
Conn
ectiv
ity
Copyright © 2006 Nokia. All rights reserved.
To send data through infrared, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.
If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.
All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by .
When blinks, your device is trying to connect to the other device or a connection has been lost.
When is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.
Data cbl.
Press , and select Connect. > Data cbl.. In Data cable mode, select what the USB data cable connection is used for: PC Suite, Data transfer, or Image print. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection.
PC connectionYou can use your deviceand data communicatioSuite you can, for examdevice and a compatibl
Always create the connwith your device.
Your device as aYou can use your devicee-mail, or to connect toby using Bluetooth concable. Detailed installatUser Guide for Nokia PC
Tip! When using Noconnect your deviceNokia PC Suite, use tin Nokia PC Suite.
Connect
Press , and select Costatus of data connectioUMTS network and wire
Conn
ectiv
ity
85ht © 2006 Nokia. All rights reserved.
nization
nect. > Sync. Sync enables you s, calendar, contacts, or e-mail calendar and address book ible computer or on the Internet. it synchronization settings.
ication uses SyncML technology nformation on SyncML supplier of the application with ronize your device data.
ization settings in a special text ettings’, p. 46.
u can see the different
on profile and Options > us of the synchronization is
tion before it finishes, select
the synchronization is complete. log file showing the s and how many entries have
Copyrig
To search for wireless LANs available within range, select Availab. WLAN.
Data connectionsIn the active connections view, you can see the open data connections: data calls ( ), packet data connections ( or ), and wireless LAN connections ( ).
Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.
To view the details of a connection, select Options > Details. The details shown depend on the connection type.
Wireless LANThe available wireless LAN view shows a list of wireless LANs within range, their network mode (Infrastructure or Ad-hoc), and signal strength indicator. is shown for networks with encryption, and if your device has an active connection in the network.
To view the details of a network, select Options > Details.
To create an Internet access point in a network, select Options > Define access point.
Synchro
Press , and select Conto synchronize your notewith various compatible applications on a compatYou can also create or ed
The synchronization applfor synchronization. For icompatibility, contact thewhich you want to synch
You may receive synchronmessage. See ‘Data and s
Synchronize dataIn the Sync main view, yosynchronization profiles.1 Select a synchronizati
Synchronise. The statshown on the display.To cancel synchronizaCancel.
2 You are notified whenSelect Yes to view thesynchronization statu
86
a password to identify your device
access point to be used when r.
e URL address of the server.
mber of the server.
rd—Enter your user name and
o receive configuration settings es.
If you want your device to ask for epting a configuration from the
k
le with Universal Plug and Play ing a wireless LAN access point router, you can create a home mpatible UPnP devices that the network, such as your Nokia compatible printer, and a m or a TV, or a sound system or TV tible wireless multimedia receiver.
Conn
ectiv
ity
Copyright © 2006 Nokia. All rights reserved.
been added, updated, deleted, or discarded (not synchronized) in your device or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.
To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options > Start configuration.
To allow or deny receiving of configuration settings from service providers, select Options > Enable config. or Disable config..
Server profile settingsContact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the configuration server.
Server password—Enterto the server.
Access point—Select anconnecting to the serve
Host address—Enter th
Port—Enter the port nu
User name and Passwopassword.
Allow configuration—Tfrom the server, select Y
Auto-accept all reqs.—confirmation before accserver, select No.
Home networ
Your device is compatibarchitecture (UPnP). Usdevice or a wireless LANnetwork and connect cosupport wireless LAN toN93, a compatible PC, acompatible sound systeequipped with a compa
Conn
ectiv
ity
87ht © 2006 Nokia. All rights reserved.
ct Always ask if you want the e access point every time you ork, User defined to select your
nt that is used automatically ork, or None. If your home
ireless LAN security settings ty warning. You can continue, AN security on later; or cancel , and first switch on the wireless s LAN in ‘Access points’, p. 101.
a name for your device that is atible devices in the home
e content
network > Share content.
or deny sharing media files with t set Content sharing on before
he other settings. If you set ther UPnP compatible devices in
ew and copy your files you have e Images & video and Music
haring with other devices from Music folders, or to view the & video or Music, select Share
Copyrig
Using the wireless LAN function of the Nokia N93 in a home network requires a working wireless LAN home connection setup and the other target home devices to be UPnP enabled and to be connected to the same home network.
You can share media files saved in Gallery with other compatible UPnP devices using the home network. To manage your Home network settings, press , and select Connect. > Home network. You can also use the home network to view, play, copy, or print compatible media files from Gallery. See ‘View media files’, p. 88.
Home network settingsTo share media files saved in Gallery with other compatible UPnP devices through wireless LAN, you must first create and configure your wireless LAN home Internet access point, and then configure the Home network application. See ‘Wireless LAN’, p. 15.
The options related to Home network are not available in Gallery before the Home network settings have been configured.
Configure settings
To configure the Home network application, select Connect. > Home network > Settings, and from the following:
Home access point—Seledevice to ask for the homconnect to the home netwhome Internet access poiwhen you use Home netwnetwork does not have wenabled, you get a securiand switch the wireless Ldefining the access pointLAN security. See Wireles
My device name— Entershown to the other compnetwork.
Set sharing on and defin
Select Connect. > Home
Content sharing—Allow compatible devices. Do noyou have configured all tContent sharing on, the othe home network can viselected for sharing in thfolders.
To select media files for sthe Images & video and sharing status of Images content.
88
tored in the other devicet are stored on another home w them in your device (or in a ple), do the following:
me network. Your device starts the patible devices. Device names start play. the list. edia you want to view from the ailable file types depend on the r device.eo clip, or music clip you want to ions > Show via home net. r Play via home network (music).which the file is shown.
ia file, select Options > Stop
Gallery through Home network printer, select the print option in t’, p. 39. Content sharing does not .
erent criteria, select Options > files, select Options > Sort by.
Conn
ectiv
ity
Copyright © 2006 Nokia. All rights reserved.
View media filesTo connect a compatible PC to the home network, you must install the related software from the DVD-ROM supplied with your Nokia N93.
If Content sharing is on in your device, the other UPnP compatible devices in the home network can view and copy the media files you have selected to share in Share content. If you do not want the other devices to access your files, set Content sharing off. Even if Content sharing is off in your device, you can still view and copy the media files stored in another home network device if it is allowed by the other device.
Show media files stored in your deviceTo select images, videos, and sound clips stored in your device, and show them in another home network device, such as a compatible TV, do the following:1 In Gallery, select an image, a video clip, or a sound
clip.2 Select Options > Show via home net.3 Select a compatible device in which the media file is
shown. The images are shown both in the other home network device and your device, and the video clips and sound clips are played only in the other device.
Show media files sTo select media files thanetwork device, and shocompatible TV, for exam1 In Gallery, select Ho
search of other comto appear on the dis
2 Select a device from3 Select the type of m
other device. The avfeatures of the othe
4 Select the image, vidview, and select Opt(images and video) o
5 Select the device in
To stop sharing the medshowing.
To print images saved inwith a UPnP compatibleGallery. See ‘Image prinhave to be switched on
To search files with diffFind. To sort the found
Conn
ectiv
ity
89ht © 2006 Nokia. All rights reserved.
CopyrigCopy media filesTo copy or transfer media files from your device to another compatible device, such as a UPnP compatible PC, select a file in Gallery, and Options > Organise > Copy to home network or Move to home network. Content sharing does not have to be switched on.
To copy or transfer files from the other device to your device, select a file in the other device, and Options > Copy to phone mem. or Copy to memory card (the name of the memory card if the memory card is available). Content sharing does not have to be switched on.
90
cy and exchange rates> Options > Currency rates.
rrency conversions, you must select exchange rates. The rate of the
1.
change base currency, you must ecause all previously set exchange
, and select Office > Notes. You atible devices, and save plain text ou receive to Notes.
patible Basic Print Profile (BPP) luetooth connectivity (such as HP ter or HP Photosmart 8150), select
Off
ice
Copyright © 2006 Nokia. All rights reserved.
OfficeCalculator
To add, subtract, multiply, divide, and calculate square roots and percentages, press , and select Office > Calculator.
Note: This calculator has limited accuracy and is designed for simple calculations.
Converter
To convert measures from one unit to another, press , and select Office > Converter.
Converter has limited accuracy, and rounding errors may occur.1 In the Type field, select the measure you want to use.2 In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to which you want to convert.
3 In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.
Set base currenSelect Type > CurrencyBefore you can make cua base currency and addbase currency is always
Note: When you enter the new rates brates are cleared.
Notes
To write notes, press can send notes to compfiles (.txt format) that y
To print a note on a comequipped printer with BDeskjet 450 Mobile PrinOptions > Print.
Off
ice
91ht © 2006 Nokia. All rights reserved.
r
ress , and select Office > ephone conversation, open all. Both parties hear a tone cording.
pplication to decode different le, barcodes and codes in y contain information such as
es, and phone numbers.
des, press , and select .
n code. Set the code between y. The Barcode reader scans and e decoded information appears
select Options > Save. The data
formation, in the main view, ode, press .
Copyrig
Web browser
Various service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.
Press , and select Office > Web.
With this additional browser, you are able to view normal Web pages, to zoom in and out on a page (Mini Map), to view Web pages that contain only text in narrow form so that text wraps, and to read feeds and blogs.
To turn the Mini Map on or off for the current page, press . When the Mini Map is on, an overview of the
complete page is shown when you press and hold the scroll key right, left, up, or down to move on the page.
See also ‘Web access point’, p. 67.
Recorde
To record voice memos, pRecorder. To record a telRecorder during a voice cevery 5 seconds during re
Barcode readerUse the Barcode reader atypes of codes (for exampmagazines). The codes maURL links, e-mail address
To scan and decode barcoOffice > Barcode reader
To scan a code, select Scathe red lines on the displadecodes the code, and thon the display.
To save the scanned data,is saved in .bcr format.
To view saved decoded inselect Saved. To open a c
92
ffice
pplications, press , and select list of files in the .doc, .xls, .ppt, ed in your device opens.
ctive application, press . To sort ort files.
icksheet, or Quickpoint, press w.
an view native Microsoft Word ay of your device. Quickword alics, and underline.
e viewing of documents saved in t Word 97, 2000, and XP. Not all f the mentioned file formats are
tion’, p. 94.
ntsnt, use the scroll key.
t for text, select Options > Find.
ions and from the following:
Off
ice
Copyright © 2006 Nokia. All rights reserved.
When viewing the decoded information, the different links, URL links, phone numbers, and e-mail addresses, are indicated by icons on the top of the display in the direction they appear in the decoded information.
In the Saved view, select Options and from the following:
Scan new code—To scan a new code
Open link—To open a URL link
Add to bookmarks—To save a URL link to the bookmarks in Web
Create message—To send a text message or an e-mail to a phone number or an e-mail address
Add to Contacts—To add a phone number, e-mail address, or URL address to Contacts
Call—To call a phone number.
The available options may vary depending on the highlighted link.
The device goes into stanby mode to save battery power if Barcode reader cannot be activated or if no keys are pressed for 1 minute. To continue scanning or viewing saved information, press .
Quicko
To use the Quickoffice aOffice > Quickoffice. Aand .txt file formats sav
To open a file in its respefiles, select Options > S
To open Quickword, Quto reach the desired vie
QuickwordWith Quickword, you cdocuments on the displsupports colors, bold, it
Quickword supports th.doc format in Microsofvariations or features osupported.
See also ‘More informa
View Word documeTo move in the docume
To search the documen
You can also select Opt
Off
ice
93ht © 2006 Nokia. All rights reserved.
he current worksheet by blocks. and rows displayed by a screen. d rows, use the scroll key to
lighted row, column, or both the spreadsheet
of columns or rows
n view Microsoft PowerPoint lay of your device.
viewing of presentations created ft PowerPoint 97, 2000, and XP. res of the mentioned file formats
n’, p. 94.
e, outline, and the notes view,
evious slide in the presentation,
in full screen, select Options >
Copyrig
Go to—to move to the start, end, or selected position within the document
Zoom—to zoom in or out
Autoscroll—to start automatic scrolling through the document. To stop scrolling, press .
QuicksheetWith Quicksheet, you can read Microsoft Excel files on the display of your device.
Quicksheet supports the viewing of spreadsheet files saved in .xls format in Microsoft Excel 97, 2000, 2003, and XP. Not all variations or features of the mentioned file formats are supported.
See also ‘More information’, p. 94.
View spreadsheetsTo move around in the spreadsheet, use the scroll key.
To switch between worksheets, select Options > Worksheet.
To search the speadsheet for a text within a value or formula, select Options > Find.
To change how the spreadsheet is displayed, select Options and from the following:
Pan—to navigate within tA block contains columnsTo display the columns anselect a block and OK.
Zoom—to zoom in or out
Freeze—to keep the highvisible while you move in
Resize—to adjust the size
QuickpointWith Quickpoint, you capresentations on the disp
Quickpoint supports the in .ppt format in MicrosoNot all variations or featuare supported.
See also ‘More informatio
View presentationsTo move between the slidpress or .
To move to the next or prpress or .
To view the presentation Full screen.
94
Off
ice
Copyright © 2006 Nokia. All rights reserved.
To expand items in the presentation outline in the outline view, select Options > Expand entry.
More informationIf you experience problems with Quickword, Quicksheet, or Quickpoint, visit www.quickoffice.com for more information. Support is also available by sending an e-mail to supportS60@quickoffice.com.
Pers
onal
ize
your
dev
ice
95ht © 2006 Nokia. All rights reserved.
own in the standby mode, press Options > Settings > Clock igital.e note to an image or animation, ools > Settings > Phone > ote / logo.enu view, in the main menu, ge view > Grid or List.
menu, in the main menu, select e to folder, or New folder. You
plications into folders, and place use more often into the main
—set tones
ringing tones, message alert different events, environments, , and select Tools > Profiles.
ss in the standby mode. ant to activate, and select OK.
, and select Tools > Profiles. select Options > Personalise.
Copyrig
Personalize your deviceYour service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby mode’, p. 97.
• To change the standby mode background image or what is shown in the screen saver, see ‘Change the look of your device’, p. 96.
• To customize the ringing tones, see ‘Profiles—set tones’, p. 95 and ‘Add ringing tones for contacts’, p. 66.
• To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see ‘Standby mode’, p. 99.
• To change the clock sh, and select Clock >
type > Analogue or D• To change the welcom
press , and select TGeneral > Welcome n
• To change the main mselect Options > Chan
• To rearrange the mainOptions > Move, Movcan move less used apapplications that you menu.
Profiles
To set and customize thetones, and other tones foror caller groups, press
To change the profile, preScroll to the profile you w
To modify a profile, pressScroll to the profile, and
96
unction by changing profiles. If the ed, enter the lock code.
evice must be switched on to use ot switch the device on when s prohibited or when it may cause er.
d the Offline profile, you can still available), for example, to read n the Internet. Remember to
able safety requirements when wireless LAN connection. See
ile, press the power key, and select ice reenables wireless g there is sufficient signal connection is activated before
e, it is deactivated. A Bluetooth ally reactivated after you exit the tings’, p. 81.
the look of your
he display, such as the wallpaper select Tools > Themes. The active
. In Themes you can group
Pers
onal
ize
your
dev
ice
Copyright © 2006 Nokia. All rights reserved.
Scroll to the setting you want to change, and press to open the choices. Tones stored on the memory card are indicated with . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.
If you want the caller’s name to be said when your device rings, select Options > Personalise, and set Say caller’s name to On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.
Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first
activate the phone fdevice has been lock
Warning: Your dOffline profile. Do nwireless device use iinterference or dang
When you have activateuse the wireless LAN (ifyour e-mail or browse ocomply with any applicestablishing and using a‘Wireless LAN’, p. 15.
To exit the Offline profanother profile. The devtransmissions (providinstrength). If a Bluetoothusing the Offline profilconnection is automaticOffline profile. See ‘Set
Changedevice
To change the look of tand icons, press , andtheme is indicated by
Pers
onal
ize
your
dev
ice
97ht © 2006 Nokia. All rights reserved.
y is
p of
r
plications shortcuts, press , Phone > Standby mode > d press .
ixed, and you are not able to
Copyrig
together elements from other themes or select images from the Gallery to personalize themes further. The themes on the memory card (if inserted) are indicated by
. The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first.
To open a browser connection and download more themes, select Theme downloads.
To activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview.
To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings.
To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme.
Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.
Press , select Tools > Settings > Phone > Standby mode > Active standby, and press to switch the active standby on or off.
The active standby displashown with default applications across the tothe screen, and calendar,to-do, and player events listed below.
Scroll to an application oevent, and press .
The standard scroll key shortcuts available in thestandby mode cannot be used when the active standby mode is on.
To change the default apselect Tools > Settings >Active standby apps., an
Some shortcuts may be fchange them.
98
reset for the device by your vice provider, and you may not be
ettings
ging the language of the display affects the format used for date
ators used, for example, in selects the language according to
r SIM card. After you change the he device restarts.
or Phone language or Writing application in your device, and the e until you change these settings
nging the language affects the haracters available when writing text dictionary used.
Tool
s
Copyright © 2006 Nokia. All rights reserved.
ToolsMedia Key
To open the shortcut assigned to the multimedia key, press and hold . To open a list of multimedia applications, press . To open the desired application, use the scroll key. To exit the list without selecting an application, press and hold .
To change the shortcuts, press , and scroll down. To change the default shortcut, select Multimedia key. To change the applications that are shown when you press
, select Top, Left, Middle, and Right and the application.
Some shortcuts may be fixed, and you are not able to change them.
Settings
To change settings, press , and select Tools > Settings. To open a settings group, press . Scroll to a setting you want to change, and press .
Some settings may be pnetwork operator or serable to change them.
Phone s
GeneralPhone language—Chantexts in your device alsoand time and the separcalculations. Automaticthe information on youdisplay text language, t
Changing the settings flanguage affects every change remains effectivagain.
Writing language—Chacharacters and special ctext and the predictive
Tool
s
99ht © 2006 Nokia. All rights reserved.
hort tune to play when you open is in the standby mode.
Select No or Yes.
d call or Activate loudspeaker.
rtcuts to applications in the e standby mode’, p. 97.
n a shortcut to the left selection mode.
ign a shortcut to the right standby mode.
lect the application shortcuts e active standby. This setting is tandby is on.
ad shortcuts for the different The scroll key shortcuts are not ndby is on.
ng is only available if you have erator logo. Select Off if you do hown.
Copyrig
Predictive text—Set the predictive text input On or Off for all editors in the device. The predictive text dictionary is not available for all languages.
Welcome note / logo—The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings to their original values. To do this, you need the lock code. See ‘Security’, ‘Phone and SIM’, p. 105. After resetting, the device may take a longer time to power on. Documents and files are unaffected.
Cover displayPersonalization:
Wallpaper—Select the background image displayed on the cover display in the standby mode. If you select User defined in the wallpaper settings, the cropping tool frame is shown on top of the image you selected. The cropping tool frame is the size of the cover display, and you can zoom, rotate, and crop the area of the image you want to be displayed on the cover display.
Closing animation—Select a short animation to play when you close the cover.
Closing tone—Select a short tune to play when you close the cover.
Opening tone—Select a sthe cover and the device
Calls:
Answer if fold opened—
If fold closed—Select En
Standby modeActive standby—Use shostandby mode. See ‘Activ
Left selection key—Assigkey ( ) in the standby
Right selection key—Assselection key ( ) in the
Active standby apps.—Seyou want to appear in thonly available if Active s
You can also assign keyppresses of the scroll key. available if the active sta
Operator logo—This settireceived and saved an opnot want the logo to be s
10
text to be sent in a text message
u can deny video sending when Select a still image to be displayed
ct On, and your device makes a ts to connect the call after an pt. To stop automatic redialing,
ctivate this setting if you want the the approximate duration of the
On, and the numbers assigned to - ) can be dialed by
e key. See also ‘Speed dial a phone
On, and you can answer an pressing any keypad key, except .
(network service) is shown only if o subscriber numbers, that is, two h phone line you want to use for
g text messages. Calls on both lines ctive of the selected line. If you
not subscribed to this network
Tool
s
0 Copyright © 2006 Nokia. All rights reserved.
DisplayBrightness—Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted.
Power saver time-out—Select the time-out period after which the screen saver is activated.
Light time-out—Select a time-out after which the backlight of the display is switched off.
Call settings
Send my caller ID—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service).
Call waiting—If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).
Reject call with SMS—Select Yes to send a text message to a caller informing why you could not answer the call. See ‘Answer or reject a call’, p. 60.
Message text—Write awhen you reject a call.
Image in video call—Yoyou receive a video call.instead of video.
Automatic redial—Selemaximum of 10 attempunsuccessful call attempress .
Summary after call—Adevice to briefly displaylast call.
Speed dialling—Select the speed dialing keys (pressing and holding thnumber’, p. 55.
Anykey answer—Selectincoming call by briefly
, , , and
Line in use—This settingthe SIM card supports twphone lines. Select whicmaking calls and sendincan be answered irrespeselect Line 2 and have
Tool
s
101ht © 2006 Nokia. All rights reserved.
(IAP) to send and receive e-mail ternet
point you need with your service u want to access. For availability t data connection services, rator or service provider.
oint settings in a message from ata and settings’, p. 46. Some or preset for your device by your rk operator, and you may not be it, or remove them. indicates
ta access point, and a t.
ernet access point in a wireless lect Connect. > Conn mgr > tions > Define access point.
oint, select Options > New ettings of an access point, select e instructions from your service
a descriptive name for the
data connection type.
Copyrig
service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and hold in the standby mode.
Line change—To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.
Connection
Data connections and access pointsYour device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a data connection.
You can also use a wireless LAN data connection. See ‘Wireless LAN’, p. 15. Only one connection in one wireless LAN can be active at a time.
To establish a data connection, an access point is required. You can define different kinds of access points, such as:• MMS access point to send and receive multimedia
messages• Access point for the Web application to view WML or
XHTML pages
• Internet access point and connect to the In
Check the type of access provider for the service yoand subscription to packecontact your network ope
Access pointsYou may receive access pa service provider. See ‘Dall access points may be service provider or netwoable to change, create, eda protected access point.
indicates a packet dawireless LAN access poin
Tip! To create an IntLAN, press , and seAvailab. WLAN > Op
To create a new access paccess point. To edit the sOptions > Edit. Follow thprovider.
Connection name—Enterconnection.
Data bearer—Select the
10
on the access point you are setting ss or the address of the multimedia
ced settings to change the
he Internet protocol type to use: ettings. The other settings depend type.
Pv4 only)—Enter the IP address of
y name serv.:, enter the IP address er. In Second. name server:, enter condary DNS server. Contact your r to obtain these addresses.
efine the address for the proxy
ter the proxy port number.
from your service provider.
lect Enter manually or Search for xisting network, WLAN netw. ity mode are determined by the int device.
Tool
s
2 Copyright © 2006 Nokia. All rights reserved.
Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.
To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—You obtain the access point name from your network operator or service provider.
User name—The user name may be needed to make a data connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.
Password—A password may be needed to make a data connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Dependingup, enter the Web addremessaging center.
Select Options > Advanfollowing settings:
Network type—Select tIPv4 settings or IPv6 son the selected network
Phone IP address (for Iyour device.
DNS address—In Primarof the primary DNS servthe IP address of the seInternet service provide
Proxy serv. address—Dserver.
Proxy port number—En
Wireless LAN
Follow the instructions
WLAN netw. name—Senetw.. If you select an emode and WLAN secursettings of its access po
Tool
s
103ht © 2006 Nokia. All rights reserved.
ly for EAP)—Enter the settings as ructs.
Pre-shared key)—Enter a word must be entered on the t device.
whether Temporal Key Integrity
e page.
ed settings and from the
ddress (the IP address of your e subnet IP address), Default nd DNS address—Enter the IP and secondary DNS server. vice provider for these addresses.
ress—Select Automatic,ined.
r Ad-hoc)—To enter a channel select User defined.
er the address for the proxy
er the proxy port number.
Copyrig
WLAN netw. mode—Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a wireless LAN access point device is not needed.
WLAN security mode—Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them.
WLAN security sett.—Enter the settings for the selected security mode:
Security settings for WEP:
Wep key in use—Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device.
Authentication type—Select Open or Shared for the authentication type between your device and the wireless LAN access point device.
WEP key settings—Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format).
Security settings for 802.1x and WPA/WPA2:
WPA mode—Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings:
EAP plug-in settings (onyour service provider inst
Pre-shared key (only forpassword. The same passwireless LAN access poin
TKIP encryption—Select Protocol (TKIP) is used.
Homepage—Define a hom
Select Options > Advancfollowing:
IPv4 settings: Phone IP adevice), Subnet mask (thgateway (the gateway), aaddresses of the primary Contact your Internet ser
IPv6 settings > DNS addWell-known, or User def
Ad-hoc channel (only fonumber (1-11) manually,
Proxy serv. address—Entserver.
Proxy port number—Ent
10
server settings from your network ider in a configuration message, or red on your (U)SIM card. You can our device, view, or delete them in
d time
5 and language settings in
n active, the code is requested switched on. Deactivating the umber (PIN) code request may not cards. See ‘Glossary of PIN and
d Lock code—You can change the d PIN2 code. These codes can only m 0 to 9. If you forget any of these
Tool
s
4 Copyright © 2006 Nokia. All rights reserved.
Packet dataThe packet data settings affect all access points using a packet data connection.
Packet data conn.—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.
Access point—The access point name is needed to use your device as a packet data modem to your computer.
Wireless LANShow availability—Select whether is displayed when a wireless LAN is available.
Scan for networks—If you set Show availability to Yes, select how often the device searches for available wireless LANs and updates the indicator.
To view advanced settings, select Options > Advanced settings. Changing wireless LAN advanced settings is not recommended.
Configs.You may receive trustedoperator or service provthe settings may be stosave these settings to yConfigs..
Date an
See ‘Clock settings’, p. 1‘General’, p. 98.
Security
Phone and SIMPIN code request—Wheeach time the device is personal identification nbe allowed by some SIMlock codes’, p. 105.
PIN code, PIN2 code, anlock code, PIN code, aninclude the numbers fro
Tool
s
105ht © 2006 Nokia. All rights reserved.
ou can set the device to display hen you are using a SIM card
codes
codes, contact your service
mber (PIN) code—This code ainst unauthorized use. The PIN ally supplied with the SIM card. correct PIN code entries, the
need the PUK code to unblock it.
be supplied with the USIM card. ced version of the SIM card and bile phones.
o 8 digits) is supplied with some to access some functions in
security code)—This code (5 k the device to avoid tory setting for the lock code is rized use of your device, change w code secret and in a safe place . If you forget the code, contact
Copyrig
codes, contact your service provider. See ‘Glossary of PIN and lock codes’, p. 105.
Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.
Autolock period—You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of commands opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.
Closed user group—You can specify a group of people to whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.
Confirm SIM services—Yconfirmation messages wservice (network service).
Glossary of PIN and lock
If you forget any of theseprovider.
Personal identification nuprotects your SIM card agcode (4 to 8 digits) is usuAfter three consecutive incode is blocked, and you
UPIN code—This code mayThe USIM card is an enhanis supported by UMTS mo
PIN2 code—This code (4 tSIM cards, and is requiredyour device.
Lock code (also known asdigits) can be used to locunauthorized use. The fac12345. To avoid unauthothe lock code. Keep the neseparate from your deviceyour service provider.
10
efit from increased security. The e does not offer any protection by nager must contain correct,
rtificates for increased security to s have a restricted lifetime. If ertificate not valid yet is shown
hould be valid, check that the n your device are correct.
s—check authenticity
the correct identity of a server the period of validity of a server ecked.
dentity of the server is not ot have the correct security e.
ails, scroll to a certificate, and icate details. When you open alidity of the certificate is checked, g notes may be displayed:ted—You have not set any e certificate. See ‘Change the trust
The period of validity has ended ificate.d yet—The period of validity has e selected certificate.
Tool
s
6 Copyright © 2006 Nokia. All rights reserved.
Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.
UPUK code—This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device.
Certif. managementDigital certificates do not guarantee safety; they are used to verify the origin of software.
In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.
Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used
correctly in order to benexistence of a certificatitself; the certificate maauthentic, or trusted cebe available. CertificateExpired certificate or Ceven if the certificate scurrent date and time i
View certificate detail
You can only be sure ofwhen the signature andcertificate have been ch
You are notified if the iauthentic or if you do ncertificate in your devic
To check certificate detselect Options > Certifcertificate details, the vand one of the followin• Certificate not trus
application to use thsettings’, p. 107.
• Expired certificate—for the selected cert
• Certificate not valinot yet begun for th
Tool
s
107ht © 2006 Nokia. All rights reserved.
g-ins currently installed in your Some Internet access points that a bearer and WPA security mode entication.
ivert your incoming calls to your phone number. For details, ider.
nt to divert and the desired voice calls when your number is coming calls, select If busy. Set r off (Cancel), or check whether heck status).
can be active at the same time. d, is shown in the
rting cannot be active at the
ing
Copyrig
• Certificate corrupted—The certificate cannot be used. Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system application.
• Internet: Yes—The certificate is able to certify servers.• App. installation: Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Track protect. objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.
EAP plug-insYou can view the EAP pludevice (network service). use wireless LAN as a datuse the plug-ins for auth
Call divert
Call divert allows you to dvoice mailbox or anothercontact your service prov
Select which calls you wadiverting option. To divertbusy or when you reject inthe option on (Activate) othe option is activated (C
Several diverting optionsWhen all calls are divertestandby mode.
Call barring and call divesame time.
Call barr
10
lect Automatic to set the device to e of the available networks, or lect the network from a list of tion to the manually selected ice sounds an error tone and asks k. The selected network must have ith your home network, that is, the d is in your device.
g agreement is an agreement e network service providers to ne service provider to use the
vice providers.
t On to set the device to indicate lar network based on microcellular ogy and to activate cell info
sett.
indicates a compatible headset hat the headset is unavailable, or a o a headset is lost. indicates a nnected and that a Text
Tool
s
8 Copyright © 2006 Nokia. All rights reserved.
Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the restriction password from your service provider.
Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.
Call barring and call diverting cannot be active at the same time.
When calls are barred, calls may be possible to the official emergency number programmed into your device.
Network
Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated with .
Network mode (shown only if supported by the operator)—Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details.
Operator selection—Sesearch for and select onManual to manually senetworks. If the connecnetwork is lost, the devyou to reselect a networa roaming agreement woperator whose SIM car
Glossary: A roaminbetween two or morenable the users of oservices of other ser
Cell info display—Selecwhen it is used in a cellunetwork (MCN) technolreception.
Enhanc.
In the standby mode, is connected, and tBluetooth connection tcompatible loopset is cophone is connected.
Tool
s
109ht © 2006 Nokia. All rights reserved.
mmands
nds to control your device. For he enhanced voice commands , see ‘Voice dialing’, p. 55.
ce commands for starting you must open the Voice cm. es folder. Press , and select iles; the device creates voice and profiles. To use enhanced d hold in the standby mode, . The voice command is the name ile displayed in the list.
to the list, select Options > New ond voice command that can be ion, select Options > Change new voice command as text. bbreviations, and acronyms.
ed voice tag, select Options >
d settings, select Options > e synthesizer that plays commands in the selected
ynthesiser > Off. To reset voice
Copyrig
Select Headset, Loopset, Text phone, Bluetooth handsfree, Music stand, or Car kit and from the following:
Default profile—Set the profile that you want activated each time you connect a certain enhancement to your device. See ‘Profiles—set tones’, p. 95.
Automatic answer—Set if you want the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for Text phone.
Lights (for music stand and car kit)—Set whether lights remain on, or are switched off after the time-out.
If you are using a Text phone, you must activate it on your device. Press , and select Tools > Settings > Enhancement > Text phone > Use Text phone > Yes.
TV configurationPress , and select Tools > TV out. Select from the following:
TV system—Select PAL for PAL and SECAM TV system format or NTSC for NTSC TV system format.
Ratio—Select 4:3 or 16:9.
Voice co
You can use voice commamore information about tsupported by your device
To activate enhanced voiapplications and profiles,application and its ProfilTools > Voice cm. > Proftags for the applications voice commands, press anand say a voice commandof the application or prof
To add more applications application. To add a secused to start the applicatcommand, and enter theAvoid very short names, a
To listen to the synthesizPlayback.
To change voice commanSettings. To switch off threcognized voice tags anddevice language, select S
11
ns and softwareication, a Java application, ot fully installed, and that the on the memory card.
install and use applications and rces that offer adequate security
harmful software.
the following:ion type, version number, and the turer of the application, select ails.ity certificate details of the ptions > View certificate. See ’, p. 106.at contains an update or repair to
ion, you can only restore the if you have the original installation copy of the removed software he original application, remove the all the application again from the file or the back-up copy.ed for installing Java applications. evice may ask you to download it. point defined for the application, ct one. When you are downloading need to enter a user name and
Tool
s
0 Copyright © 2006 Nokia. All rights reserved.
recognition learning, for example, when the main user of the device has changed, select Reset voice adapts..
Application manager
Press , and select Tools > App. mgr.. You can install two types of applications and software to your device:• J2ME™ applications based on Java technology with
the extension .jad or .jar ( ). • Other applications and software suitable for the
Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia N93. Software providers will often refer to the official model number of this product: the Nokia N93-1.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a memory card (local disk).
Install applicatio indicates a .sis applthat the application is napplication is installed
Important: Only other software from souand protection against
Before installation, note• To view the applicat
supplier or manufacOptions > View det
• To display the securapplication, select O‘Certif. management
• If you install a file than existing applicatoriginal application file or a full back-uppackage. To restore tapplication, and instoriginal installation
• The .jar file is requirIf it is missing, the dIf there is no accessyou are asked to selethe .jar file, you may
Tool
s
111ht © 2006 Nokia. All rights reserved.
r Via e-mail (available only if s are in place).
vice can only support one ing more than one application ty could affect performance and vice to stop functioning.
ons and softwareage, and select Options > nfirm.
ou can only reinstall it if you e package or a full backup of the e. If you remove a software
ger be able to open documents re.
ftware package depends on the you removed, the other stop working. Refer to the installed software package for
s and from the following:
lect to check the online ing an application.
Copyrig
password to access the server. You obtain these from the supplier or manufacturer of the application.
1 To locate an installation file, press , and select Tools > App. mgr.. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messag. > Inbox that contains an installation file.
2 In App. mgr., select Options > Install. In other applications, scroll to the installation file, and press to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.
To start an installed application, locate it in the menu, and press .
To start a network connection and to view extra information about the application, select Options > Go to web address, if available.
To see what software packages are installed or removed and when, select Options > View log.
To send your installation log to a help desk so that they can see what is installed or removed, select Options > Send
log > Via text message othe correct e-mail setting
Important: Your deantivirus application. Havwith antivirus functionalioperation or cause the de
Remove applicatiScroll to a software packRemove. Select Yes to co
If you remove software, yhave the original softwarremoved software packagpackage, you may no loncreated with that softwa
Note: If another sosoftware package thatsoftware package maydocumentation of thedetails.
SettingsSelect Options > Setting
Online certif. check—Secertificates before install
11
hat have no media files connected
or extend the usage period for a alid activation key and Options > ation keys cannot be updated if ception is disabled. See ‘Web .
ation, such as the validity status ile, scroll to an activation key, and
Tool
s
2 Copyright © 2006 Nokia. All rights reserved.
Default web address—Set the default address used when checking online certificates.
Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the App. mgr. main view, scroll to an application, and select Options > Suite settings to change settings related to that specific application.
Activation keys for copyright-protected files
Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
To view the digital rights activation keys stored in your device, press , and select Tools > Actv. keys and from the following:
Valid keys—View keys that are connected to one or more media files and keys whose validity period has not started yet.
Invalid keys—View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.
Not in use—View keys tto them in the device.
To buy more usage timemedia file, select an invActivate content. ActivWeb service message reservice messages’, p. 47
To view detailed informand ability to send the fpress .
Trou
bles
hoot
ing
113ht © 2006 Nokia. All rights reserved.
vice is not in the hidden mode.s are compatible.
ooth connection?
nected to your device, you can on using the other device or by connectivity. Select Connect. >
wing message is displayed: No ned. Define one in Services
er settings. Contact your service s.
udgy?
lastic film covering the display and camera lens protection window is
ise from the camera when om is used?
ment causes mechanical noise. gs > Optical zoom during
Copyrig
TroubleshootingQ&AAccess codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer.If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider.For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold . Scroll to the application, and press to close the
application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth connectivity.Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices.
Check that the other deCheck that both device
Q: Why can’t I end a Bluet
A: If another device is coneither end the connectideactivating BluetoothBluetooth > Off.
Browser services
Q: What do I do if the follovalid access point defisettings.?
A: Insert the correct browsprovider for instruction
Camera
Q: Why do images look sm
A: Remove the protective pcamera. Ensure that theclean.
Q: Why is there audible noautofocus or optical zo
A: Zoom and AF lens moveSelect Options > Settin
11
ear empty?
d a filter, and no communication er have been logged. To see all events, > Options > Filter > All
evice memory is low?
lowing items regularly to avoid
, Drafts, and Sent folders in Messag.sages from the device memory
Gallery
tion, calendar notes, call timers, call or any other data, go to the remove the data. If you are deleting f the following notes are shown: Not orm operation. Delete some data lete some data., try deleting items the smallest item).
ta before deleting it?
ne of the following methods:
make a back-up copy of all data to er.
Trou
bles
hoot
ing
4 Copyright © 2006 Nokia. All rights reserved.
recording > Off to eliminate mechanical noise caused by lens movement when recording.
Q: Why do images or videos captured using night mode tend to be noisier under dark lighting conditions compared to normal mode?
A: The output of the image sensor under the dark lighting conditions is more amplified with night mode than with normal mode to provide better brightness. In return, the noise level on the image or video increases.
Q: Why do VGA video frames appear jagged when video stabilization is activated?
A: Each video frame is enlarged from a smaller size within VGA to the VGA size when video stabilization is activated. Due to this, the quality within each frame is degraded compared to video without stabilization mode.
Display
Q: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Home network (UPnP)
Q: Why can’t I share files with other devices?
A: Ensure that you have configured the home network settings. Select Connect. > Home network > Share content > Content sharing, and the other device is UPnP compatible.
Log
Q: Why does the log app
A: You may have activateevents fitting that filtselect My own > Logcommunication.
Memory low
Q: What can I do if my d
A: You can delete the folmemory getting low:
• Messages from Inbox• Retrieved e-mail mes• Saved browser pages• Images and photos in
To delete contact informacost timers, game scores,respective application tomultiple items and one oenough memory to perffirst. or Memory low. Deone by one (starting from
Q: How can I save my da
A: Save your data using o
• Use Nokia PC Suite toa compatible comput
Trou
bles
hoot
ing
115ht © 2006 Nokia. All rights reserved.
connection when the device starts n and again?
making a data connection, select the following:efer retrieval—to have the centre save the message to be ple, after you have checked the ge, the device still needs to send
e network. To retrieve the message diately.eject message—to reject all essages. After this change, the formation notes to the network, ssaging center deletes multimedia ing to be sent to you.Off—to ignore all incoming fter this change, the device does onnections related to multimedia
connecting the device to my PC?
ite is installed and running on your for Nokia PC Suite on the formation on how to use Nokia PC
tion on Nokia PC Suite or visit the nokia.com.
Copyrig
• Send images to your e-mail address, then save the images to your computer.
• Send data using Bluetooth connectivity to a compatible device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a multimedia message because memory is full?
A: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details.
Q: The note Retrieving message is shown briefly. What is happening?
A: The device is trying to retrieve a multimedia message from the multimedia messaging center.Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multim. msg..
Q: How can I end the data a data connection agai
A: To stop the device fromMessaging and one of On receiving msg. > Dmultimedia messaging retrieved later, for examsettings. After this chaninformation notes to thnow, select Retr. immeOn receiving msg. > Rincoming multimedia mdevice needs to send inand the multimedia memessages that are waitMultimedia recept. > multimedia messages. Anot make any network cmessaging.
PC connectivity
Q: Why do I have problems
A: Ensure that Nokia PC SuPC. See the User Guide DVD-ROM. For further inSuite, see the help funcsupport pages at www.
11
Trou
bles
hoot
ing
6 Copyright © 2006 Nokia. All rights reserved.
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even though I know I'm within its range?
A: The WLAN access point may use a hidden service set identifier (SSID). You can only access networks that use a hidden SSID if you know the correct SSID and have created a WLAN Internet access point for the network on your Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia device?
A: You cannot switch off WLAN on your Nokia device. To reduce battery consumption, you can specify that your Nokia device does not scan for available networks.
To turn off the background scan:1 Press , and select Tools > Settings > Connection >
Wireless LAN.2 Select Scan for networks > Never.3 To save your changes, select Done.
When Scan for networks is set to Never, your Nokia device still listens to available networks, and you can use available WLAN networks as usual.
Batt
ery
info
rmat
ion
117ht © 2006 Nokia. All rights reserved.
ttery. Accidental short-circuiting object such as a coin, clip, or pen f the positive (+) and negative (-) hese look like metal strips on the , for example, when you carry a t or purse. Short-circuiting the battery or the connecting object.
or cold places, such as in a closed nditions, will reduce the capacity . Always try to keep the battery 9°F and 77°F). A device with a hot rk temporarily, even when the ttery performance is particularly ll below freezing.
in a fire as they may explode. if damaged. Dispose of batteries ns. Please recycle when possible.
ld waste.
authentication
batteries for your safety. To check ginal Nokia battery, purchase it ealer, look for the Nokia Original
Copyrig
Battery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery that is damaged.
Do not short-circuit the bacan occur when a metalliccauses direct connection oterminals of the battery. (Tbattery.) This might happenspare battery in your pocketerminals may damage the
Leaving the battery in hot car in summer or winter coand lifetime of the batterybetween 15°C and 25°C (5or cold battery may not wobattery is fully charged. Balimited in temperatures we
Do not dispose of batteriesBatteries may also explodeaccording to local regulatioDo not dispose as househo
Nokia battery guidelinesAlways use original Nokia that you are getting an orifrom an authorized Nokia d
11
he label to , for
210. Turn e numbers he 20-digit om the followed by
digit code is instructions tterycheck.
, enter the le, , and send to
al operator charges will apply.
age indicating whether the code can
not authentic?
at your Nokia battery with the n authentic Nokia battery, please do
it to the nearest authorized Nokia assistance. The use of a battery that anufacturer may be dangerous and mance and damage to your device
Batt
ery
info
rmat
ion
8 Copyright © 2006 Nokia. All rights reserved.
Enhancements logo on the packaging, and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram1 When looking at the hologram on
the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.
2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.
3 Scratch the side of treveal a 20-digit codeexample, 12345678919876543the battery so that thare facing upwards. Tcode reads starting frnumber at the top rowthe bottom row.
4 Confirm that the 20-valid by following theat www.nokia.com/ba
To create a text message20-digit code, for examp12345678919876543210+44 7786 200276.
National and internation
You should receive a messbe authenticated.
What if your battery is
If you cannot confirm thhologram on the label is anot use the battery. Takeservice point or dealer foris not approved by the mmay result in poor perfor
Batt
ery
info
rmat
ion
119ht © 2006 Nokia. All rights reserved.
Copyrigand its enhancements. It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
12
mage the device and may violate radio devices.
p of data you want to keep (such as r notes) before sending your device to
reset, power the device off, and om time to time for optimum ack-up copies of all important data.
ons apply equally to your device, nhancement. If any device is not to the nearest authorized service
Care
and
mai
nten
ance
0 Copyright © 2006 Nokia. All rights reserved.
Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could daregulations governing
• Use chargers indoors.• Always create a backu
contacts and calendaa service facility.
• To allow the device toremove the battery frperformance. Make b
All of the above suggestibattery, charger, or any eworking properly, take it facility for service.
Addi
tiona
l saf
ety
info
rmat
ion
121ht © 2006 Nokia. All rights reserved.
smitting equipment, including fere with the functionality of dical devices. Consult a physician medical device to determine if d from external RF energy or if you off your device in health care ions posted in these areas instruct ealth care facilities may be using nsitive to external RF energy.
recommend that a minimum ters (6 inches) be maintained nd a pacemaker to avoid potential aker. These recommendations are
ndent research by and ess Technology Research. Persons
more than 15.3 centimeters (6 maker a breast pocketear opposite the pacemaker to for interference.
, switch off your device, and move
Copyrig
Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.
Operating environment
Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.
In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.
Medical devices
Operation of any radio tranwireless phones, may interinadequately protected meor the manufacturer of thethey are adequately shieldehave any questions. Switchfacilities when any regulatyou to do so. Hospitals or hequipment that could be se
Pacemakers Pacemaker manufacturers separation of 15.3 centimebetween a wireless phone ainterference with the pacemconsistent with the indeperecommendations of Wirelwith pacemakers should:• Always keep the device
inches) from their pace• Not carry the device in• Hold the device to the
minimise the potential
If you suspect interferencethe device away.
12
e wireless telephone network, and
e environments
hen in any area with a potentially d obey all signs and instructions. ospheres include areas where you d to turn off your vehicle engine. d cause an explosion or fire resulting eath. Switch off the device at ear gas pumps at service stations. e use of radio equipment in fuel ibution areas, chemical plants or s are in progress. Areas with a osphere are often but not always ude below deck on boats, chemical ies, vehicles using liquefied ropane or butane), and areas where ls or particles such as grain, dust, or
ss phones, including this device, ls, wireless networks, landline ammed functions. Because of this, ions cannot be guaranteed. You n any wireless device for essential ical emergencies.
Addi
tiona
l saf
ety
info
rmat
ion
2 Copyright © 2006 Nokia. All rights reserved.
Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt thmay be illegal.
Potentially explosiv
Switch off your device wexplosive atmosphere, anPotentially explosive atmwould normally be adviseSparks in such areas coulin bodily injury or even drefueling points such as nObserve restrictions on thdepots, storage, and distrwhere blasting operationpotentially explosive atmclearly marked. They incltransfer or storage facilitpetroleum gas (such as pthe air contains chemicametal powders.
Emergency calls
Important: Wireleoperate using radio signanetworks, and user-progrconnections in all conditshould never rely solely ocommunications like med
Addi
tiona
l saf
ety
info
rmat
ion
123ht © 2006 Nokia. All rights reserved.
r mobile devices employ a unit of e Specific Absorption Rate or SAR. ICNIRP guidelines is 2.0 watts/over 10 grams of tissue. Tests for tandard operating positions with its highest certified power level in The actual SAR level of an low the maximum value because e only the power required to reach hanges depending on a number of ou are to a network base station.
er the ICNIRP guidelines for use of 4 W/kg.
nd enhancements may result in alues may vary depending on ing requirements and the network mation may be provided under w.nokia.com.
Copyrig
To make an emergency call: 1 If the device is not on, switch it on. Check for adequate
signal strength. Some networks may require that a valid SIM card is properly inserted in the device.
2 Press as many times as needed to clear the display and ready the device for calls.
3 Enter the official emergency number for your present location. Emergency numbers vary by location.
4 Press the key.
If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines fomeasurement known as thThe SAR limit stated in thekilogram (W/kg) averaged SAR are conducted using sthe device transmitting at all tested frequency bands.operating device can be bethe device is designed to usthe network. That amount cfactors such as how close yThe highest SAR value undthe device at the ear is 0.5
Use of device accessories adifferent SAR values. SAR vnational reporting and testband. Additional SAR inforproduct information at ww
12
ck 14alarm 14settings 15
es 104lock codePIN code 105PIN2 code 105security code 105puter connections 84ference call 54nection settings 101tact cards 64inserting pictures 64sending 64storing DTMF tones 61
yingcontacts between the SIM card and
device memory 65yright protectionsee activation keys
a connectionsdetails 85ending 85
4 Copyrigh
IndAaccess p
setactivatialarms
alaapplicat
instJav
BbackingBluetoo
condevheapaisecswi
bookma
Ccache, ccalenda
cresyn
t © 2006 Nokia. All rights reserved.
exoints 101
tings 101on keys 112
rm clock 14ionsalling 110a 110
up 19th 80necting two devices, pairing 82ice address 82dset 108ring 82urity 81tching off 83rks 67
learing 69rate entries 71chronizing PC Suite 71
call registerSee log
callsdialled numbers 62duration 62international 54received 62settings 100settings for call diverting 107transferring 61
cameraadjusting lighting and color 27editing videos 30flash 27image setup settings 27imaging mode 10saving video clips 22scenes 27self-timer 26sequence mode 26still image camera settings 25video recorder settings 23
certificates 106clear screen
See standby mode
clo
cod
comconconcon
cop
cop
Ddat
125ht © 2006 Nokia. All rights reserved.
et settings 108peaker 14
ox 47automatic retrieving 48a filesfast forward 76file formats 75mute sound 76rewind 76oryclearing memory 20, 62viewing memory consumption 20ory card 19, rearranging 95aginge-mail 44multimedia messages 44text messages 44s
fold closed 9fold open 10imaging 10view mode 10es, muveesquick muvees 78imedia messages 44c player 38
Copyrig
indicators 13date 14device manager 86digital rights management, DRM
see activation keys
Eediting videos
adding effects 31adding sound clips 30adding transitions 30custom video clips 30
e-mail 44automatic retrieving 48opening 48remote mailbox 47retrieving from mailbox 47settings 51viewing attachments 48
Ffile formats
.jad 110
.jar 110
.sis 110RealPlayer 75
file manager 20fixed dialing 65FM radio 73
Ggallery 29
backup files 40ordering files in albums 34, 35presentations 34TV out mode 33
Hhandsfree
see loudspeakerheadset settings 108help application 21Home network 17
Iindicators 13Internet
See WebInternet access points (IAP)
See access points
JJava
See applications
Llock code 105log
erasing contents 63filtering 63
log duration 63
loopslouds
Mmailb
medi
mem
memmenumess
mode
movi
multmusi
12
UPUK code 106rtcuts 11 cardcopying names and numbers to
phone 65messages 49names and numbers 65
file 110oze 14tware
transferring a file to your device 110
nd clips 29ndsmuting a ringing tone 60recording sounds 91
ed dialling 55ndby mode 95 files 34chronization 85
t messages 44mes 96e 14nsferring content from another
device 12
6 Copyright © 2006 Nokia. All rights reserved.
mute sound 76
Ooffice applications 92
Ppacket data connections
settings 104PC connections 84PC Suite
calendar data 71synchronization 84transferring music files to your
memory card 38viewing device memory data 20
personalization 96phonebook
See contact cardsPIN code 105profiles 95
QQuickoffice 92
Rradio 73remote mailbox 47remote SIM mode 81ringing tones
personal ringing tone 66receiving in a text message 46
Sscenes
image scenes 28video scenes 28
security codeSee lock code
sendingcontact cards, business cards 64video clips 32
service commands 42settings
access codes 104access points 101Bluetooth connectivity 81calendar 72call barring 107call diverting 107certificates 106data connections 101date and time 104display 100language 98lock code 105original settings 99personalizing the phone 95PIN code 105screen saver 100UPIN code 105
shoSIM
sis snosof
sousou
spestasvgsyn
Ttexthetimtra
127ht © 2006 Nokia. All rights reserved.
CopyrigUUniversal Plug and Play 17
security 18UPIN code 105UPUK code 106USSD commands 42
Vvideo call 56
answering 60rejecting 60
video clips 29video player
See RealPlayerVisual Radio 73
viewing content 74visual service ID 74
voice commands 109voice dialling 55voice mailbox 54
changing the phone number 54diverting calls to voice mailbox 107
voice messages 54voice tags 109
making calls 55volume control 14
during a call 54loudspeaker 14
WWeb
access points, see access pointsbrowser 67
wireless LAN 15access point settings 102create IAP 16security 18see also Universal Plug and Play
Recommended