View
1
Download
0
Category
Preview:
Citation preview
Technology Services
Ciencia y Tecnología No. 790, Col. Saltillo 400 25290 Saltillo, Coahuila; México.
Corporación Mexicana de Investigación en Materiales, S.A. de C.V.
IntroductionCOMIMSA is a self‐sufficient CONACYT Public Research Center
Our main business lines are: risk analysis, reliability engineering, mechanical integrity engineering, manufacturing engineering, engineering materials and engineering projects.
Our focus is on the oil and gas industries.
COMIMSA’s target industries are: steel, mining, energy and automotive.
Nowadays COMIMSA has 10 active projects in 10 Mexican cities, having 1,100 specialists.
Annual volume sales are 40 million dollars average.
COMIMSA has always been recognized as a competent corporation due its service attitude and knowledge quality.
Project Engineering
• Process engineering
• Control and Instruments engineering
• Electrical engineering
• Mechanical Engineering (Pipelines and containers)
• Civil ‐ Planning Engineering
• BIM* technology
This line is focused on: Basic Engineering, Detailed Engineeringand Supervision.
COMIMSA has a170,000 man‐hour work capacity
in different engineering fields
Development Engineering of BIM*
* Building Information Modeling
Mechanical IntegrityProcess Plants
• Mechanical integrity evaluation in pressure subject containers, atmospheric tanks and metallic structures
• Guided ultrasonic waves in process piping
• Qualification for service evaluation
• Drilling equipment structure evaluation
• Infrared thermography and vibration analysis
Pipelines
• Pipeline integrity management
• Pipeline integrity assessment
• Internal corrosion and corrosion inhibitors evaluation
• Guided ultrasonic waves in buried pipeline
• Surface facilities mechanical integrity evaluation
Certified Personnel
Manufacturing Engineering
Engineering and Design
Reverse engineering development, components design and manufacturing for equipment and systems manufacturing and rehabilitation.
Gas Turbine Reconditioning
Gas turbine components manufacturing and rehabilitation, comprising rotors, extractors, combustion chambers, vanes, gas manifolds, etc.
Static and Dynamic Equipment Maintenance
Equipment maintenance including vertical pumps, four‐way valves, ball valves, and rotary converters. This service integrates components manufactured and / or
rehabilitated by COMIMSA.
Reconditioning drilling equipment
Manufacturing and rehabilitation of components such as mud pumps modules,winch belts brake, pulleys, winch and hooks, etc.
Environmental Engineering
• Development of new technologies on air, water and soil treatments
• Research and Oil Recovery by microbian methodologies
Geosciences
• Geological risk assessment
• Hydrogeological assessment
• Geophysical prospection
• Geotechnical engineering
• Geographic information systems (GIS)
Polluted soil characterization
Hydrocarbons polluted soils remediation
Polluted soils and water remediation
Wastewater analysis
Wastewater Plants design
Research and technological development projects
Projects:
Laboratory Services
Materials Evaluation • Metallographic analysis• Thermal treatments evaluation• Mechanical tests • Chemical analysis• Welding procedures specification and
performance tests
Failure Analysis• Defects evaluation and characterization• Mechanism and cause of failure
determination• Electronic scanning microscopy• EDS
Chemical Analysis• Ferrous and non ferrous materials• Superalloys• Non‐metallic materials • Waste and soil analysis
Corrosion
• Test focused on:• Accelerated corrosion electrochemical • Corrosiveness• Coatings• Inhibitors characterization and efficiency
evaluation
Lubricants• Preventive maintenance diagnose using lubricants
analysis and monitoring • Quality control • Heavy machinery lubricant check (lub pollution and
machinery wear)
Quality Air• Perimeter monitoring and stationary sources
Strobes• Strobes certification using loading tests
ISO IEC 17025:2005/ NMX‐EC‐17025‐IMNC‐2006 Accreditation
AndISO 9001‐2008 Certification
ISO IEC 17025:2005/ NMX‐EC‐17025‐IMNC‐2006 Accreditation
AndISO 9001‐2008 Certification
Reliability Engineering Our reliability assessment and hazard analysis are focused on chemical process plants that usehazardous chemical substances. These studies and evaluations pursuit the use of Process SafetyManagement Systems, to increase reliability, availability and safety for all assets.
Reliability Strategies
• Risk Based Inspection (API‐580/581)
• Reliability Centered Maintenance• Quantitative Risk Analysis
• Criticality Analysis
• Functional Safety• Statistical Methods• Life cycle cost analysis
• Asset managementRisk Management
• Risk analysis
• Emergency Response Planning
• Environmental Evaluation
• Deep water facilities risk analysis
• Safety barriers analysis• Layer of Protection Analysis
• Consequence analysis
Software DevelopmentOur IT Department is certified as “Capability Maturity Model Integration”
CMMI Level 3 and ISO 9001.
It services are currently focused on three main areas:
• Mapping and Processes Optimization
• Enterprise Software Development
• Mobile Applications Development
Software developed by COMIMSA
HARMI® Software was developed as a theRisk based inspection technology, based onthe American Petroleum Institutestandards. HARMI® software includesReliability centered maintenance and RiskBased Inspection applications.
SAPIRT® is a software that allowsinspection results storage usingnondestructive testing in oil installations,both offshore and onshore, includingprocessing plants and rigs.
Our software was developed in a web‐based system and its interfaces useboth systems databases to reach abetter risk management .
Strategy Development(IBR plan))
Planning Strategy
Strategy Execution
Data collection and analysis
Optimized strategy (new IBR)
Re‐evaluationof the
strategy (IBR plan)
Maintenance actions
Defectanalysis
Human Development and Post‐graduate Studies Master and Doctorate degree in Science and Technology
Advanced Manufacturing Technologies
Specialty and Master’s degree in Industrial Welding Technology
Industrial Engineering
COMIMSA has four graduate programs:
Industrial Welding Technology Specialization
Industrial Welding Technology Master Degree
Science and Technology Master Degree with two terminal options: Industrial Engineering and Advanced Manufacturing Systems
Science and Technology PhD with terminal options in: Industrial Engineering and Advanced Manufacturing Systems
Our programs are recognized by CONACYT through the PNPC (National Program for Quality in Postgraduate Studies).
Current academic staff: 17 research professors,
SNI (National System of Researchers) 60%.
Technological Development
RDI (Research, Development and Innovation)
• Products and processes design and development
• Prototype manufacturing, design and simulation using finite element
• Technological projects identification, integration and execution
• RDI funds search and assessment
• National and International government funds proposal assessment (CONACYT, SE, IBEROEKA, OSEO, etc.)
COMIMSA´S Offices
/comimsamx
@comimsa
www.comimsa.com/english
info@comimsa.com
Recommended