View
225
Download
0
Category
Preview:
Citation preview
7/31/2019 Monitoring SPD Setup
1/18
Systagenix SCM PROD Monitoring setup
1.1 Update OS services and hosts entries in CEN and all monitored ABAP systems
Step-by-Step
1. On solution manager add entries of the satellite systems IP and Hostname on the /etc/hosts eg.vi /etc/hosts
10.151.184.16 swwh-scap-pp1 swwh-scap-pp1.systagenix.com
10.151.184.17 swwh-scap-pp2 swwh-scap-pp2.systagenix.com
2. On satellite systems add entries of the Solution Manager systems IP and Hostname on the/etc/hosts eg. vi /etc/hosts
#SOLUTION MANAGER SYSTEM ENTRIES
172.23.120.201 cbrmgmtsol01 cbr-mgmt-sol-01 cbr-mgmt-sol-01.mgmt.ciber.net
172.23.120.202 cbrmgmtsol02 cbr-mgmt-sol-02 cbr-mgmt-sol-02.mgmt.ciber.net172.23.120.203 cbrcsoascs00172.23.120.204 cbrcsoscs01172.23.120.205 cbrcsodb
3. On solution Manager update services the satellite systems message servers port.eg.vi /etc/services
4. On satellite systems update services the Solution managers message server port.eg.vi /etc/services
SapmsCSO 3600/tcp # SAP System Message Server Port
Vi services
Insert I SHIFT I
Shift G to go to end
Paste the info
Escape (disable the edit mode)
:wq! To save or :q! to quit.
More to know whether the entry is added or not.
7/31/2019 Monitoring SPD Setup
2/18
1.2 Activated background dispatching in monitored ABAP systems in client 000.--done
Step-by-Step
1. Call transaction RZ21. The Monitoring: Properties and Methods screen appears.2. Choose Technical Infrastructure > Local Method Execution >Activate
Background Dispatching
1.3 Creating the CSMREG User---done
Required a user with specific, greatly restricted authorizations for communication betweenmonitored systems and CEN. Created the user monitored ABAP systems
Step-by-Step1. Call transaction RZ21 in the relevant system (Business client ).2. Choose Technical Infrastructure > Configure Central System > Create CSMREG User.
7/31/2019 Monitoring SPD Setup
3/18
Passowrd: C1B3RR0CKS
1.4 Required super user in Monitored system for RFC connections (solution manager torelevant system 000 client) ---BIP
Step-by-Step
1. Login to 000 client and call transaction SU01.
2. Create solman user in 000 client as a super user.
User SOLMAN ( Type Service) created in 000 client ofSPD (C1B3RR0CKS)--Done
1.5 Entering Monitored ABAP Systems in CEN
To monitor remote ABAP systems in CEN, create a corresponding entry in the alert monitor. To dothis, first set up two RFC destinations for the monitored system in CEN; these RFC destinationseach serve one of the following purposes:
Data collection (transferring monitoring data to CEN)
Analysis (calling analysis methods in the monitored system from CEN)
7/31/2019 Monitoring SPD Setup
4/18
Step by-Step
Create RFC Destination for ABAP and JAVA solution manager
1. login to solution manager system and call transaction sm59
Create new RFC connections, we required four RFC connections
SPDSWWA_RZ20_ANALYZESPDSWWA_RZ20_COLLECTSPDSWWJ_RZ20_ANALYZESPDSWWJ_RZ20_COLLECT
On the Techinical Settings tab page, enter the Target system informationEnter the following:
Target Host
System No
Choose the Logon/Securitytab page, and, depending on the RFC destination to be created, enterthe data for the appropriate user in the Logon group box:
7/31/2019 Monitoring SPD Setup
5/18
7/31/2019 Monitoring SPD Setup
6/18
Choose the Logon/Securitytab page, and, depending on the RFC destination tobe created, enter the data for the appropriate user in the Logon group box:
7/31/2019 Monitoring SPD Setup
7/18
7/31/2019 Monitoring SPD Setup
8/18
1.6 Install sapccm4x agents on Satellite systems(FOR windows)
Navigate to the path E:\usr\sap\SOL\DVEBMGS10\log\sapccm4x and created sapccmsr.ini
file and in that specify LONGSID SOLBAGA.(LONGSID BIPBAGA)
IN Linux:to create a file below command.
Vi file name(sapccmsr.ini)
Shift i
Path:
E:\usr\sap\SPD\SYS\exe\uc\NTAMD64>sapccm4x -R
pf=E:\usr\sap\SPD\SYS\profile\SPD_DVEBMGS02_swwh-scap-pp1
INFO: CCMS agent sapccm4x working directory is
C:\usr\sap\SPD\DVEBMGS02\log\sapccm4x
INFO: CCMS agent sapccm4x config file is
C:\usr\sap\SPD\DVEBMGS02\log\sapccm4x\csmconf
**** Welcome to SAP CCMS agent program sapccm4x ****
Please enter the name (system ID) of
the CENTRAL (!) monitoring system.
SAP system ID : cso
additional CENTRAL system y/[n] ? : nINFO: found ini file C:\usr\sap\SPD\DVEBMGS02\log\sapccm4x\sapccmsr.ini.
INFO:
CCMS version 20040229, 64 bit, multithreaded, Unicodecompiled at Nov 18 2008
systemid 562 (PC with Windows NT)relno 7000
patch text patch collection 2008/4, OSS note 1129577/1136330
patchno 185
INFO Runtime:
7/31/2019 Monitoring SPD Setup
9/18
running on SWWH-SCAP-PP1 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Le
vel 6 (Mod 23 Step 10)
running with profile E:\usr\sap\SPD\SYS\profile\SPD_DVEBMGS02_swwh-scap-pp1
INFO profile parameters:alert/MONI_SEGM_SIZE = 60000000
alert/TRACE = 1
SAPSYSTEM = 02SAPSYSTEMNAME = SPD
SAPLOCALHOST = swwh-scap-pp1
DIR_CCMS = C:\usr\sap\CCMS
DIR_LOGGING = C:\usr\sap\SPD\DVEBMGS02\logDIR_PERF = C:\usr\sap\PRFCLOG
INFO:
pid 5436
INFO: Attached to Shared Memory Key 13 (size 60211232), no pool used
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application s
erver swwh-scap-pp1_SPD_02, created with version CCMS version 20040229, 64 bit multithreaded, compiled at Nov 18 2008, kernel 7000_20050900_185, platform 562
(PC with Windows NT)]
segment status ENABLED
segment started at Wed Aug 05 02:33:33 2009segment version 20040229
****************************************************
********************** CSO **********************
****************************************************
Please enter the logon info for an admin user of thecentral monitoring system [CSO].
The user should have system administrator privileges
client [000] : 100
user : sapagentlanguage [EN] : EN
hostname of CSO message server : cbrcsoascs00
use Load Balancing n/[y] ? : n
hostname of application server [cbrcsoascs00] :
7/31/2019 Monitoring SPD Setup
10/18
system number (00 - 98) : 02 (solman system no)
[optional] route string :
trace level [0] :
please enter password for [CSO:100:sapagent]: **********
Try to connect ...
INFO: [CSO:100:SAPAGENT] connected to CSO, host cbrcsoascs00, System Nr. 02, tra
ceflag [ ]INFO: CSO release is 700 , (kernel release 700 )
This program will act as registered RFC server lateron.
Please enter the info for a gateway of monitoring system CSO
gateway info:
host: [cbrcsoascs00]
service: [sapgw02]
Gateway info ok n/[y] ? : y
**** CCMS agent sapccm4x: RFC client functionality ****
This CCMS agent program sapccm4x is able to actively report
alert data into the monitoring system [CSO].
To enable this feature, you have to setup the user CSMREG
in [CSO]. (refer to SAP Online-help, search for 'CSMREG').
Alternatively use any user in [CSO] that has at least authorization ).
to call per RFC function groups
SALC, SALF, SALH, SALS, SAL_CACHE_RECEIVE, SCSMBK_DATA_OUT,SCSMBK_RECONCILE, SCSM_CEN_TOOL_MAIN, SYST, RFC1
After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
client [000] : 100
user [CSMREG] :language [EN] :
hostname of CSO message server [cbrcsoascs00] :
use Load Balancing [n]/y ? :hostname of application server [cbrcsoascs00] :
system number (00 - 98) [02] :
[optional] route string :
trace level [0] :
7/31/2019 Monitoring SPD Setup
11/18
please enter password for [CSO:100:CSMREG]: **********
Try to connect ...
INFO: [CSO:100:CSMREG] connected to CSO, host cbrcsoascs00, System Nr. 02, trace
flag [ ]INFO: CSO release is 700 , (kernel release 700 ), CCMS version 20040229
INFO: RFC logon info for [CSO:100:CSMREG] can be updated at any time with -R option:
sapccm4x -R
INFO: Updated saprfc.ini in agent work directory C:\usr\sap\SPD\DVEBMGS02\log\sa
pccm4x
INFO: LongSid SPDSWWA set in sapccmsr.ini
INFO: Connected to CSO, CCMS version in ABAP: 20040229[optional] monitored system SPDSWWA belongs to system group :
INFO: handling destination SAPCCM4X.SWWH-SCAP-PP1.02INFO: successfully registered at CSO
INFO: trying to register service SAPCCM4X.02 at Windows Service Control Manager
starttype of service: manual/[auto] : auto
DomainName\UserName or [] : SWW(Computer
name)\SAPServiceSPD(baecsdev01\SAPServiceSOL)password (SAP login Password) : **********INFO sapccm4x is no
longer
runningINFO or file was deleted.
INFO: trying to start Windows service SAPCCM4X.02 ...
Windows service SAPCCM4X.02 has been started.
INFO: The following service is registered and started:
SAPCCM4X.02 (command ["E:\usr\sap\SPD\SYS\exe\uc\NTAMD64\sapccm4x.exe"
-Service pf=E:\usr\sap\SPD\SYS\profile\SPD_DVEBMGS02_swwh-scap-pp1] user
[SWW\SAPSe
rviceSPD])INFO: Updated config file C:\usr\sap\SPD\DVEBMGS02\log\sapccm4x\csmconf.
EXITING with code 0
7/31/2019 Monitoring SPD Setup
12/18
1.7 Installing sapccmsr on a Java Instance (Double-Stack System)
Procedure
. Log on to the host of J2EE Engine of the system as adm.
2. Copy the CSMCONF path specified
(E:\usr\sap\QWD\DVEBMGS00\log\sapccm4x) start file to the following directoryMicrosoft Windows: [drive]:\usr\sap\ccms\_\sapccmsrMicrosoft Windows:[drive]:\usr\sap\ccms\_\sapccmsr
Step by-Step
1. login to visual administrator
2. Go to Dispatcher Services Monitoring
Visual admin pathC:\usr\sap\SPD\DVEBMGS02\j2ee\admin\go.bat
Dispatcher --
services
7/31/2019 Monitoring SPD Setup
13/18
7/31/2019 Monitoring SPD Setup
14/18
7/31/2019 Monitoring SPD Setup
15/18
1.9 Assign auto reaction methods
7/31/2019 Monitoring SPD Setup
16/18
Click on ASSIGN Central Auto Reaction
2.0 Setup alert threshold values
7/31/2019 Monitoring SPD Setup
17/18
2.1 Configure availability instance alert
Start transaction RZ21 in the central monitoring system (solution manager system), and choose themenu path Technical Infrastructure Availability Monitoring Configure CCMSPING Monitoring
7/31/2019 Monitoring SPD Setup
18/18
Recommended