View
22
Download
0
Category
Preview:
Citation preview
PATCH CABLES PIGTAILS
ADAPTER PLATES PATCH PANELS
SWITCHES MEDIA CONVERTERS
MTP SOLUTIONS
Fiber OpticMINI CATALOG
INDEX
ReliabilityQuality
Optic Fiber
Single-mode
Multi-modeNetwork
Cables
Cust
om
MPO
MTP
AttenuatorsEnclosures
Converters
Cassettes
Solutions
Loop-backs
Switches
Splicing
Fan-outs
Adapters
Couplers
Testers
Cooling
Simplex
MountsPanels
Hybrid
Duplex
ToolsBoxes
Media
Patch
Trays
Racks
Sheet
Metal
MXC
OM1
OM3
STLC
SC
FC
TM
Cable Management ..................... 15
Fiber Switches ............................. 17
Media Converters ........................ 19
Network Copper Cables ............ 21
Tools ................................................ 23
Fusion Splicing ............................. 25
Visual Fault Locators ................. 27
Fiber Patch Cables ..................... 1
Fiber Optic Pigtails .................... 3
Fiber Optic Loopbacks .............. 5
Adapter Plates ............................. 7
Adapters ........................................ 9
Attenuators ................................... 11
Patch Panels ............................... 13
FIBER PATCH CABLES
We offer a huge selection of Fiber Optic Patch Cables. Most of our
cables are Ready-to-Ship for overnight deliveries. Single-mode and
Multimode fiber optic jumper and patch cords are available at factory
direct prices. Don’t forget we also offer armored variants as
well. Some of our options include; Single-mode (9/125μm),
Multimode OM1 (62.5/125μm) and Multimode OM3 (50/125μm). Our
assemblies are manufactured using Corning glass and all cables can be
customized for little to no extra cost.
Connectors Fiber Mode Fiber Count Cable Diameter Ø Jacket Color Jacket Type Unit
D: SC/UPC E: SC/APC F: E2000 G: E2000/APC H: FC/UPC I: FC/UPC K: LC/UPC L: LC/APC S: ST/UPC Y: MT-RJ
9: Single-mode (9/125μm) 6: Multimode OM1 (62.5/125μm) 7: Multimode OM3 (50/125μm) 4: Multimode OM4 (50/125μm) 2: Multimode (200/230μm) 1: Multimode (100/140μm) P: Panda PM Fiber B: Bowtie PM Fiber E: Elliptical PM Fiber
S: Simplex (1 Fiber) D: Duplex (2 Fiber)
2: 2mm Jacket 3: 3mm Jacket 4: 900μm (0.9mm) 6: 250μm Bare
Y: Yellow O: Orange A: Aqua L: Blue G: Green E: Brown S: Slate W: White R: Red B: Black U: Purple P: Pink
R: Riser (OFNR) P: Plenum (OFNP) L: Low Smoke (LSZH) N: None V: PVC Jacket
M: Meters F: Feet I: Inches C: Centimeters
FIBER PATCH CABLES PART NUMBER MATRIXBelow is an example part number: PC-KK9D3YV01M. It is a Patch Cable with LC/UPC to LC/UPC Connectors, Single-mode (9/125μm) Duplex with a 3mm Yellow PVC Jacket and 1 Meter in length.
PC
PRODUCT GROUP
K K
CONNECTORS A&B
9
FIBER MODE
D
FIBER COUNT
3
CABLEDIAM Ø
Y
JACKET COLOR
V
JACKET TYPE
01
TOTAL LENGTH
M
UNIT
1 2
FIBER OPTIC PIGTAILS
Fibertronics supplies fiber optic pigtails at competitive prices. We
offer 3 primary fiber versions including the Single-mode (9/125μm),
Multimode OM1 (62.5/125μm) and Multimode OM3 (50/125μm) types.
Our fiber pigtails are made with a variety of Premium Grade Jackets with
LC, SC, ST, and FC Connectors. They typically feature a 0.9mm outer
diameter cable.
FIBER OPTIC PIGTAIL PART NUMBER MATRIXBelow is an example part number: SPJ-12LCMM10G3. It is a Pigtail with 12 Fibers, LC/UPC Connectors, Multimode OM3 (50/125μm) and 3 Meters in length.
Product Group Fiber Count Connectors Fiber Mode Length
SP: Splice Pigtail SPJ: Splice Pigtail Jacketed
1: 1 Fiber 6: 6 Fiber 12: 12 Fiber
LC: LC/UPC LCA: LC/APC SC: SC/UPC SCA: SC/APC FC: FC/UPC FCA: FC/APC ST: ST/UPC
SM: Single-mode (9/125μm) MM: Multimode OM1 (62.5/125μm) MM10G: Multimode OM3 (50/125μm)
#: Length in Meters
Fibertronics also offers a variety of custom-made fiber optic pigtails with various connector types, please contact us at 321 473 8933 or visit our online store www.fibertronics.com.
SPJ
PRODUCT GROUP
LC
CONNECTORS
MM10G
FIBER MODE
12
FIBER COUNT
3
LENGTH
CUSTOM PIGTAILS
Simplex fiber pigtails and duplex fiber pigtails are available with
different cable colors, diameters and jacket types.
3 4
FIBER OPTIC LOOPBACKS
Fiber Optic Loopbacks are designed to return media; this is typically used
for testing and network diagnostics. They feature a very compact
design, and like all our products, can be custom ordered with a variety of
options available. Our loopbacks are compliant with ATM, Fast Ethernet,
Fiber Channel, and Gigabit Ethernet.
LC Fiber Optic Loopback
Single-mode DX 9/125μm LB-LCSM1
Connector: LC/UPCMode: Single-mode, OS2, 9/125μmFiber Count: 01
Product Features• Custom Manufactured• Compliant to Telcordia, EIA/TIA and IEC
standards• Custom loop length and cable diameter
on request
LC Fiber Optic Loopbacks Multimode DX OM1
62.5/125μm & OM3 50/125μm LB-LCMM62.5, LB-LCMM50
Connectors: LC/UPCModes: OM1 62.5/125μm / OM3 50/125μmFiber Counts: 01
Product Features• Custom Manufactured• Compliant to Telcordia, EIA/TIA and IEC
standards• Custom loop length and cable diameter
on request
SC Fiber Optic Loopback
Single-mode DX 9/125μm LB-LCSM1
Connector: LC/UPCMode: Single-mode, OS2, 9/125μmFiber Count: 01
Product Features• Custom Manufactured• Compliant to Telcordia, EIA/TIA and IEC
standards• Custom loop length and cable diameter
on request
SC Fiber Optic Loopbacks Multimode DX OM1
62.5/125μm & OM3 50/125μm LB-SCMM62.5, LB-SCMM50
Connectors: SC/UPCModes: OM1 62.5/125μm / OM3 50/125μmFiber Counts: 01
Product Features• Custom Manufactured• Compliant to Telcordia, EIA/TIA and IEC
standards• Custom loop length and cable diameter
on request
5 6
FIBER OPTIC ADAPTER PLATES
LGX Adapter Plates F-Type Adapter Plates 1U Adapter Plates
Connectors• LC/UPC, LC/APC• SC/UPC, SC/APC• FC/UPC, FC/APC• ST/UPC• MTP Standard
Fiber Modes• Single-mode (9/125μm)• Multimode OM1 (62.5/125μm)• Multimode OM3 (50/125μm)
Types• Blank• Simplex• Duplex• Quad• LGX to CCH
Ports• 6, 8, 12, 24, None
Connectors• LC/UPC, LC/APC• SC/UPC, SC/APC• FC/UPC, FC/APC• ST/UPC
Fiber Modes• Single-mode (9/125μm)• Multimode OM1 (62.5/125μm)• Multimode OM3 (50/125μm)
Types• Blank• Simplex• Duplex• Quad
Ports• 6, 12, 24, None
Connectors• LC/UPC, LC/APC• SC/UPC, SC/APC• FC/UPC, FC/APC• ST/UPC
Fiber Modes• Single-mode (9/125μm)• Multimode OM1 (62.5/125μm)• Multimode OM3 (50/125μm)
Types• Simplex• Duplex• LGX
Ports• 12, 24
ADAPTER PLATES PRODUCT OPTIONS
We have a good mix of LGX, F-Type and 1U Adapter Plates
available. Our LGX fiber optic patch panel adapter plates, are designed
specifically to fit most patch panels while the in-house F-Type adapter
plates are designed for use within our own F-Type patch panels.
LGX adapter plates have dimensions of 13.03cm (5.130”) x 2.92cm (1.150”) with a center pin spacing of 11.80cm (4.646”). F-Type have dimensions of 13.48cm (5.31”) x 3.96cm (1.56”) with a center pin spacing of 12.06cm (4.75”).
To order your adapter plates you can either call us at 321 473 8933 or visit our online store www.fibertronics.com.
7 8
FIBER OPTIC ADAPTERS
ADAPTERS PART NUMBER MATRIX
Fibertronics offers a variety of fiber optic adapters with all connector
types including SC, SC/APC, FC, FC/APC, LC, LC/APC, ST, E2000, SMA
and MTP. Single-mode and Multimode fiber optic adapters are available in
multiple variants including Simplex, Duplex and Quad (4 Port)
configurations with multiple colors and with or without a flange.
Below is an example part number: FT-ADDX-LCSMBW. It is a Fibertronics branded Adapter with a Duplex LC/UPC, Single-mode (9/125μm), Blue in color with a full flange for easy fitment into an adapter plate.
Adapter Type Connector Fiber Mode Color Flange Shutter
SX: Simplex DX: Duplex QX: Quad
LC: LC/UPC SC: SC/UPC FC: FC/UPC ST: ST/UPC
SM: Single-mode (9/125μm) MM: Multimode
B: BlueG: Green (APC)T: Tan/Beige (OM1)A: Aqua (OM3)
W: Full FlangeO: Reduced Flange
S: Shuttered
If not present at the end of the part number the adapter is non-shuttered.
FT
MANUFACTURER
DX
ADAPTER TYPE
AD
PRODUCT GROUP
W
FLANGE
LC
CONNECTOR
SM
FIBER MODE
B
COLOR
Fibertronics offers US Connect MTP® / MPO bulkhead adapters in a variety of single port and ganged configurations. They are available in Standard and SC Footprints for both full and reduced flange in a variety of colors including black, beige, green, aqua, blue, and gray. They are compatible with all US Conec MTP® brand connectors in fiber counts ranging from 4 to 72.
Bare Fiber Adapters, Hybrid Adapters and Terminators as also available on our online store www.fibertronics.com.
9 10
FIBER OPTIC ATTENUATORS
Available for use in Single-mode 9/125μm, Multimode 62.5/125μm (OM1)
and Multimode 50/125μm (OM3) applications. Our Male to Female
Build-out Optical Attenuation (Pads) are available in all fiber modes with
LC, LC/APC, SC, SC/APC, FC, FC/APC and ST types.
The In-line Attenuator is custom manufactured to meet the length and
connector type customers need. The Adjustable Attenuator uses a
Air Gap for the attenuation value and is available with a ST or FC
configurations. The Variable Attenuator is our newest addition.
In-line Male to Female Bulkhead Variable
Connectors• LC/UPC, LC/APC• SC/UPC, SC/APC• FC/UPC, FC/APC• ST/UPC
Fiber Modes• Single-mode (9/125μm)• Multimode OM1 (62.5/125μm)• Multimode OM3 (50/125μm)
Attenuation• 2dB• 5dB• 8dB• 10dB• 25dB
Connectors• SC/UPC• FC/UPC• ST/UPC
Wave Length• 1310nm• 1550nm
Attenuation• 5dB• 10dB• 15dB• 20dB
These are Handheld Optical Variable Attenuators, used for continuously variable optical signal attenuation.
The attenuator is primarily used in laser systems and on-line testing, it can therefore be used in digital communication devices (such as: PHD and SDH) and in a system of adapting analog modulation (CATV).
FT-VA3301A: 0 - 30dBFT-VA3301A: 0 - 60dB
In-line Cable Adjustable Air Gap Collimator Variable
FT-ILFA-05: Single-mode (9/125μm) 5dBFT-ILFA-10: Single-mode (9/125μm) 10dBFT-ILFA-15: Single-mode (9/125μm) 15dBFT-ILFA-20: Single-mode (9/125μm) 20dB
FT-2250: ST AdjustableFT-2251: FC Adjustable
VOA-SM-2M: Single-mode (9/125μm)VOA-MM62-2M: Multimode OM1 (62.5/125μm)VOA-MM50-2M: Multimode OM3 (50/125μm)
ATTENUATOR PRODUCT OPTIONSAvailable for use in Single-mode 9/125, Multimode 50/125 and Multimode 62.5/125 applications. Our Male to Female Build-out Optical Attenuation (Pads) are available in all fiber modes with LC, LC/APC, SC, SC/APC, FC, FC/APC and ST types.
• 4dB• 7dB• 10dB• 20dB
• 3dB• 6dB• 9dB• 15dB
11 12
FIBER OPTIC PATCH PANELS
Fibertronics offers a complete line of fiber optic patch panels and
termination kits. 12 fiber 24 core, 48, 72 and 144 fiber configurations.
Standard 1U, 2U, 3U and 4U (LIU) Fiber Optic Patch Panels and Optical
Distribution Frames (ODF).
Rack Mounts for
4 P-Type Slim Cassettes APP18-4MPO-1U
This is a full P-Type compatible patch panel that accommodates P-Type Slim Cassettes. These units have a pull-out tray and offer full access from the front. These units also have a full smoked clear, front hinged access panel.
Height Options: 1U
Product Features• P-Type Compatible• Rack Mountable• Powder Coated• Smoked Front Cover• Slide-out Tray for Easy Access• Front Hinged Doors
19” Swing Out Panels for LGX Adapter PlatesLGX-APP17-2X-1U, LGX-APP17-2X-2U
Rack-mount fiber distribution units designed to support both patching and splicing in one unit. These units have a swing-out master panel that allows access for termination and splicing. Included are two universal 19” or 23” mounting supports.
Height Options: 1U, 2U
Product Features• 19” and 23” Standard Size, Light Weight
and Robust Structure• 16-gauge steel with corrosion-resistant
black powder finish coat• Patching and splicing in one unit
19” Patch Panels for
LGX Adapter Plates LGX-APP11-2D-1U, LGX-APP11-2D-2U,
LGX-APP11-2D-3U, LGX-APP11-2D-4U
These are full LGX compatible patch panels that accommodate LGX adapter plates or Fibertronics LGX MTP / MPO Cassettes. These units have a pull-out tray and offer full access from the front and rear.
Height Options: 1U, 2U, 3U, 4U
Product Features• 19” and 23” Standard Size, Light Weight
and Robust Structure• 16-gauge steel with corrosion-resistant
black powder finish coat• Patching and splicing in one unit
19” Patch Panels for
F-Type Adapter Plates FT-1RU3AP, FT-2RU6AP, FT-3RU9AP,
FT-4RU12AP
These are F-Type compatible patch panels that accommodate F-Type adapter plates. These units have a pull-out tray.
Height Options: 1U, 2U, 3U, 4U
Product Features• F-Type Compatible• 16-gauge steel with corrosion-resistant
black powder finish coat• Suitable for both ribbon and round cable• Improved design to assure fiber optic
cable bend radius not less than 40mm
13 14
CABLE MANAGEMENT
Cable management solutions from Fibertronics are designed to ensure
your network investments continually perform. Our cable
organizers are great for routing and managing cable layouts. This makes
planning easier and helps with future-proofing and troubleshooting for
technicians.
Blank Cover PanelsRM-BP1U, RM-BP2U,
RM-BP3U, RM-BP4U
Blank cover panels provide a neat and clean appearance by hiding cabling. The blank panels fit a standard 19” wide rack. The panels are constructed of black powder coated steel with pre-drilled mounting holes.
Height Options: 1U, 2U, 3U, 4U
Product Features• Easy Installation• Standard Size• Powder Coated• Pre-drilled Mounting Holes
Horizontal Brush PanelsCM-BP-01, CM-BP-01
These network rack brush panels are a standard 19” plate that can be used for cable management and provides a neat and clean appearance for your cabling. The panel is constructed of black painted steel with mounting holes pre-drilled for ease and convenience.
Height Options: 1U, 2U
Product Features• Brushes to keep dust out• Easy Installation• Standard Size• Powder Coated• Pre-drilled Mounting Holes
D-Ring PanelsCM-01P-1U, CM-01P-2U,
CM-05-1U-LD CM-01-1U
The D-Ring rack mount panels have a standard 19” plate that is great for simple cable organization. They are constructed of both molded plastic and black powder coated steel with pre-drilled mounting holes.
Height Options: 1U, 2U
Product Features• Easy Installation• Standard Size• Powder Coated (Only on Steel D-Rings)• Pre-drilled Mounting Holes
Finger Duct PanelsPart Numbers & Decriptions Below
Finger Duct rack mount panels fit a standard 19” wide rack and covers 1U of rack space. They are constructed of both molded plastic and black powder coated steel with mounting holes pre-drilled for ease and convenience.
CM-02-1U: 1U, Metal PanelCM-02-2U: 2U, Metal Panel CM-05-1U: 1U, Plastic PanelCM-05-2U: 2U, Plastic Panel CM-05-1UD: 1U, Plastic, Dual Sided PanelCM-05-2UD: 2U, Plastic, Dual Sided PanelCM-06-20UVS: 20U, Plastic Vertical PanelCM-06-40UVS: 40U, Plastic Vertical PanelCM-06-20UV: 20U, Dual Sided, Vertical PanelCM-06-40UV: 40U, Dual Sided, Vertical Panel
15 16
FIBER SWITCHES
Fibertronics Fiber Optic Switches are much faster than the
previously used copper switches and are optimized to make use of a fiber
optic signal. They are most commonly used in businesses where there
is a requirement to switch from an optical signal to more traditional data
transfer methods (copper) and vice versa.
2 Port Switch 10/100/1000 RJ45, 2 SFP PortsESW-2204
Our ESW-2204 optical fiber switch has 2 Fiber Optic SFP Module ports and 2 X 10/100/1000 Base-TX copper RJ-45 ports. It works best with Cat6 or Cat 5e Ethernet patch cables.
It supports dual optical SFP modules and Gigabit transmission speeds, with a 1000Base-T maximum transmission distance of the Fibertronics SFP module selected for Multimode or Single-mode applications.
It is ideal for commercial office applications connecting floors together in multi-level buildings and other optical fiber networks.
Various 4 Ethernet Port SwitchesPart Numbers & Descriptions Below
Fibertronics offers a variety of 4 port switches that feature either 1 or 2 Fiber Optic Duplex ports 100 Base-FX and 6 X 10/100Base-TX copper RJ-45. They work best with Fibertronics Cat6 or Cat5e Ethernet patch cables.
They are ideal for commercial office applications, connecting floors together in multi-level buildings and other optical fiber networks.
ESW-605: 1 Fiber Port, Multimode, 2kmESW-605S25: 1 Fiber Port, Single-mode, 25kmESW-605A/B: 1 Fiber Port, WDM, 25kmESW-2206: 2 Fiber Optic SFP Modules
Various 6 Ethernet Port SwitchesPart Numbers & Descriptions Below
Fibertronics offers a variety of 6 port switches that feature either 1 or 2 Fiber Optic Duplex ports 100 Base-FX and 6 X 10/100Base-TX copper RJ-45. They work best with Fibertronics Cat6 or Cat5e Ethernet patch cables. They are ideal for commercial office applications, connecting floors together in multi-level buildings and other optical fiber networks.
ESW-618: 1 Fiber Port, Multimode, 2km ESW-628: 2 Fiber Port, Multimode, 2kmESW-618S25: 1 Fiber Port, Single-mode, 25kmESW-628S25: 2 Fiber Port, Single-mode, 25kmESW-618A/B: 1 Fiber Port, WDM, 25kmESW-628A/B: 2 Fiber Port, WDM, 25km
8 Port Switch 10/100/1000 RJ45, 2 SFP Ports ESW-2210
The ESW-2210 switch provides 8 10/100/1000M RJ45 ports and 2 X 1000M SFP fiber ports, users may need to use different SFP modules, such as 1000Base-T, 1000Base-SX, 1000Base-LX. It offers stable performance and excellent quality.
Product Features• Provides 8-port 10/100/1000M RJ45 and
2-port SFP fiber ports• Supports auto duplex(HDX/FDX)
auto MDI/MDIX function• SFP port supports 1000BASE-SX/LX
modules• Supports 802.3x flow control
17 18
MEDIA CONVERTERS
Fibertronics Network Media Converters can transform signals among
Ethernet, Fast Ethernet, Gigabit Ethernet, T1/E1, DS3, ATM, V.35 and
many more. Our high quality and reliable fiber optic media converters are
available in many different types.
10/100BASE-TX/FX Media Converters Part Numbers & Descriptions Below
The EMC-1100 series is among Fibertronics’ answers to expanding existing Fast Ethernet net-works. The easy implementation and expansion of 10/100BASE-TX/FX networks is assured with these converters. They are completely transparent when connected to a network, allowing for the co-existence of both copper and fiber.
EMC-1100S25: SC, Single-mode, 25km EMC-1100S40: SC, Single-mode, 40km EMC-1100S60: SC, Single-mode, 60km EMC-1100S80: SC, Single-mode, 80km EMC-1100S120: SC, Single-mode, 80kmEMC-1100-SC: SC, Multimode, 2km EMC-1100-ST: ST, Multimode, 2km
10/100/1000BASE-TX/FX Media Converters Part Numbers & Descriptions Below
The Fibertronics EMC-2200 series can be used in a 16 slot chassis as a plug in module. It transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa. The 1000Base-T port supports a full-duplex Gigabit connection at wire speed with a RJ45 connector. The fiber Gigabit connection supports Shortwave (SX) or Longwave (LX) laser optic with Multimode or Single-mode SC type connector.
EMC-2200-SC: SC, Multimode, 550mEMC-2200S20: SC, Single-mode, 20kmEMC-2200S40: SC, Single-mode, 40km EMC-2200S80: SC, Single-mode, 80kmEMC-2200A-SFP: SFP for Gigabit Links
Bi-directional (Bi-di) WMD Media ConvertersPart Numbers & Descriptions Below
These Bi-Di (Bi-directional) 2 Wavelength WDM (Wave Division Multiplexing) Fiber Optic Media Converters are designed to fit into the fast growing and ever advancing optical fiber network deployment environment.
Users can now double their optical fiber band-width and upgrade their existing 100Base-TX or even 10Base-T network easily and more cost effectively. Product is sold in pairs.
EMC-1200S25: 10/100BASE-TX, SC, 25km EMC-1200S40: 10/100BASE-TX, SC, 40km EMC-1200S60: 10/100BASE-TX, SC, 60kmEMC-1200S80: 10/100BASE-TX, SC, 80km
Single-mode to Multimode Media Converters Part Numbers & Descriptions Below
Fibertronics Single-mode to Multimode Media Converters are used to convert a Single-mode fiber signal to a Multimode equivalent that extends the long span fiber connections easily and inexpensively.
These media converters can be installed as a standalone unit or as a slide-in module to the 19”converter rack (up to 14 units) for use at a central hub.
EMC-1020MS: 100Base-SX/LX, 155Mbps EMC-2020MS: 1000Base-LX, 1.25Gbps
19 20
NETWORK COPPER CABLES
Fibertronics offers easy to use Network Copper Cables or LAN Cables.
These Ethernet Patch Cables are available in Bulk or Individual Snag-less
Boot Types. The most commonly available types include Cat5, Cat5e, Cat6
and Cat6a. Our range includes a variety of different colors with shielded
variants also available.
Cat5e Ethernet Patch Cables Part Numbers & Descriptions Below
Our Cat5e cables are great at reducing cross-talk and confining signals to different channels, ensur-ing that the signals remain strong and that there is minimal interference. Cat5e Ethernet Cables are capable of handling speeds of up to 1000 Mbps (known as Gigabit Ethernet) at 100 MHz.
CAT5E-BLACK-***FT: BlackCAT5E-BLUE-***FT: BlueCAT5E-GRAY-***FT: Gray CAT5E-GREEN-***FT: GreenCAT5E-ORANGE-***FT: OrangeCAT5E-PURPLE-***FT: PurpleCAT5E-RED-***FT: RedCAT5E-WHITE-***FT: White CAT5E-YELLOW-***FT: Yellow
Cat6 Ethernet Patch CablesPart Numbers & Descriptions Below
Fibertronics Cat6 cables are a step above, capable of handling speeds of up to 10 Gigabits (10x faster than Cat5e) at 250 MHz. They improve cross-talk reduction by using an internal separator. They are also backwards compatible with all Cat5e installations.
CAT6-BLACK-***FT: BlackCAT6-BLUE-***FT: BlueCAT6-GRAY-***FT: Gray CAT6-GREEN-***FT: GreenCAT6-ORANGE-***FT: OrangeCAT6-PURPLE-***FT: PurpleCAT6-RED-***FT: RedCAT6-WHITE-***FT: White CAT6-YELLOW-***FT: Yellow
Cat6a Ethernet Patch Cables Part Numbers & Descriptions Below
Cat6a supports data transfer rates of up to 10Gbps at a maximum bandwidth of 500MHz. Cat6a has additional and tighter twists, with additional insulation to reduce crosstalk.
It is also backwards compatible with CAT6 and CAT5e, but is limited by the other connectors in the link.
CAT6A-BLUE-***FT: BlueCAT6A-GREEN-***FT: GreenCAT6A-YELLOW-***FT: Yellow
***Various lengths are available including; 0.5ft, 1ft, 2ft, 3ft, 5ft, 7ft, 10ft, 14, 20ft, 25ft, 30ft, 50ft, 75ft, and 100ft.
21 22
FIBER OPTIC QUALITY TOOLS
When you’re out in the field working on fiber optic projects and installations
you want to make sure you are working with the best tools available.
Fibertronics supplies high end tools from industry leading and well known
international manufactures, the likes of which include Miller and Ripley
Cleavers / ScribesPart Numbers & Descriptions Below
All of our fiber optic scribes produce a quality cleave in optical fiber by creating a precision controlled break.
This break creates a perpendicular flat surface at the end face of glass fibers. The procedure is known as the scribe-and-tension strategy or the scribe-and-break strategy.
CS-30-W: Single End Carbide ScribeCS-30-DE: Double End Carbide ScribeDS-60-C: Diamond Scribe with a 60 AngleDS-90-W: Diamond Scribe with a 90 AngleFOC-SS: Fiber Optic Cleaver Field Kit
Slitters / Access ToolsPart Numbers & Descriptions Below
Fiber optic cable jacket slitters are an efficient and indispensable tool for fiber optic cable termination. They easily slit PVC cable jackets into two halves before crimping. Lots of time is saved with this consistent and precise tool.
FOJST: Fiber Optic Jacket Slitting ToolMSAT: Mid-Span Access ToolMSAT 5: Mid-Span Access ToolMSS100: Mid Span SlitterACS: Professional Armored Cable SlitterACS 2: Professional Armored Cable Slitter42555: CommScope® Mid-Span Entry ToolFDS: Fiber Optic Drop Cable SlitterFDS- 2-3 MM: Drop Stripper & Buffer Slitter
Fiber Optic StrippersPart Numbers & Descriptions Below
When stripping fiber optic cable, a professional quality stripping tool makes your job easier by providing a clean cut. We have a complete line of hand tools for the right job.
FTS: Fiber Optic Jacket StripperFTS-035: Jacket Stripper (Thick Tubes)FO-CF: Center Feed StripperCFS- 2: Dual, 600 - 900µm & 125µm BareCFS-2 900: Dual, 600 - 900µm & 125µm BareFO 103-S: Single, 250µm Buffer from 125µmOPTISTRIP: Strips 0.5 to 3 mm in diameterFO 103-D-J: Dual, 600 - 900µm & 125µm Bare FO 103-D-250: Dual, 250µm & 125µm BareFO-R12: Fiber Ribbon Access ToolFO 103-T-250-J: Three Hole Fiber Stripper
Kevlar Cutters / Shears Part Numbers & Descriptions Below
Fiber optic Kevlar cutters, shears & scissors are specially designed to cut Kevlar materials, soft cable, electrical tape and more.
Made of high-carbon stainless steel for durability, these ergonomic cutting tools reduce hand strain and increase leverage.
KS-1: Kevlar Cutting Shears without a PouchKC699: Ergonomic Shears for Cutting Kevlar46331: Fine Point Fiber Optic Kevlar ShearsFOKC: Fine Point Fiber Optic Kevlar Shears
23 24
FIBER OPTIC FUSION SPLICING
All core alignment fiber optic fusion splicers from Fibertronics offer high
magnification and dependable accuracy, these products are perfect
for onsite deployment, outside plant (OSP), and fiber to the subscriber
(FTTX) splicing.
Splice Sleeves Part Numbers & Decriptions Below
Fibertronics offers specially designed slice sleeves that provide support and protection to a fiber optic fusion splice. The sleeves are semi-rigid which helps to provide protection to the splice area. They are simple to install, which decreases the potential for damage to the splice. The splice sleeves are heat shrinkable.
PST-25MM: 25mm, 100 Pack, Steel SupportPST40MMRRD: 40mm, 50 Pack, Dual SupportPST40MM: 40mm, 50 Pack, Steel SupportPST40MMRS: 40mm, 50 Pack, Plastic SupportPST40MMRSS 40mm, 50 Pack, Plastic SupportPST60MM: 60mm, 100 Pack, Steel Support
FS-8993 Core Alignment Fusion SplicerFS-8993
Fibertronics offers a very reliable and dependable fusion splicer, the Fiber Optic FS-8993 Core Alignment Fusion Splicer.
This device is for use within several areas of fiber optic deployment, Premise (onsite), OSP (outside plant), or FTTX (fiber to the subscriber) splicing.
Product Features• Equipped with color LCD monitor & 256
magnification for easy viewing and clarity• 9-Second splice time and 40-second
tube-heat allow for quick splicing so you are not wasting precious time on your jobs
FS-8992 Core Alignment Fusion SplicerFS-8992
The FS-8992 is a highly reliable and efficient fiber optic fusion splicer, designed for many areas of deployment. Equipped with a high-powered LED Digital Display, this machine is perfect for splicing even in dark environments. It comes equipped with a high-capacity Lithium Ion battery and an AC adapter and plug to complement it.
Product Features• 304x magnification, and the average
splicing loss of less than 0.02dB for Single-mode and 0.01dB for Multimode.
• 8 Second splice time and a 25 second heat shrink time, allowing for rapid completion of projects.
Greenlee 910FS Core Alignment Fusion Splicer Kits Part Numbers & Decriptions Below
• Designed to meet virtually any FTTx application
• Features Core Alignment to minimize splice losses and rework time.
• Dual cameras, 240X magnification, and a large 5.7”color LCD.
• Up to 5,000 splice records can be stored, and the long-life, quick charged battery keeps on working even in remote locations.
910FS-KIT1: Fusion Splicer Kit 1910FS-KIT2: Fusion Splicer Kit 2
25 26
VISUAL FAULT LOCATORS
Fibertronics Visual Fault locators are great for use in fiber optic cable
testing. Our Testers are available in various different power levels.
They are adjustable from a steady red laser light, fast blinking red laser
light, and a slow blinking level.
Fiber Optic Visual Fault Locator 1mW VFL-01
This Pen-type 1mW Visual Fault Locator (VFL) is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.
Product Features• Economical• Compact in size making it easy and
convenient to use• Dust-proof design keeps fiber connectors
clean
Fiber Optic Visual Fault Locator 5mWVFL-05
This Pen-type 5mW Visual Fault Locator (VFL) is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.
Product Features• Economical• Compact in size making it easy and
convenient to use• Dust-proof design keeps fiber connectors
clean
Fiber Optic Visual Fault Locator 10mWVFL-10
This Pen-type 10mW Visual Fault Locator (VFL) is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.
Product Features• Economical• Compact in size making it easy and
convenient to use• Dust-proof design keeps fiber connectors
clean
Fiber Optic Visual Fault Locator 20mW VFL-20
This Pen-type 20mW Visual Fault Locator (VFL) is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.
Product Features• Economical• Compact in size making it easy and
convenient to use• Dust-proof design keeps fiber connectors
clean
27 28
MADE IN THE USA
321 473 89332900 Dusa Drive,Melbourne Florida, 32934sales@fibertronics.com
Recommended