View
5
Download
1
Category
Preview:
Citation preview
HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI Telecom Energy SolutionsMigrate Towards Simplicity
Full connected world cannot build without network, power supply
become a key factor in network reliability. Along rapid development of
telecommunication industry, site number tends to be explosive and the
growth rate of energy cost exceeds increase of income. Low energy efficiency
and weak expansion ability of traditional site hardly meets requirements of
building a green broadband network and reducing operational cost. How to
effectively deploy sites, elevate energy efficiency and reduce carbon emissions
while improving the power supply and environment assurance reliability, has
become common challenges faced by enterprises and operators globally.
H uawei, with extensive experiences in digital technology, network
technology, M2M, software, big data, and power electronics, is
promoting legacy telecom power onto a new level, where energy
can be accessed anytime, anywhere, energy utilization becomes simpler, energy
management becomes smarter and energy facility is always ready to facilitate
network evolution. MTS (Migrate Towards Simplicity) makes everything simple,
ensures more efficient network and operation. Let's build a better connected
world, together.
• Large Capacity Power System100A-24,000A/6kW-1,440kW
• Indoor Power System100A-600A/6kW-36kW
• Outdoor Power System100A-400A/6kW-24kW
• Wall-mounted Power System30A-60A/1.74kW-3.2kW
• Embedded Power System30A-400A/1.74kW-24kW
• Monitoring ModulesSUM02B/ECC500
• Rectifier Modules15A-100A/870W-6,000W
• Advanced Energy Storage ModulesESM-A2400Wh(D)/ESM-A9600Wh(N)
Contents
Large capacity power(100A-24,000A)
Outdoor power(100A-400A)
Indoor power(100A-600A)
Wall-mounted power(30A-60A)
Embedded power(30A-400A)
6
• New Generation Outdoor SolutionMTS9000A
• PowerCube 1000 - Solar HybridPowerCube S1/S2/S3
• PowerCube 1000 - Diesel HybridPowerCube D1-Standard/D1-Advanced
• PowerCube 1000 - Grid HybridPowerCube G2/G3/G4/G4-Mini
• PowerCube 500IVS Solution
• Energy OSSNetEco
Diesel HybridMTS9000A
IVS Solution NetEco
Solar Hybrid
Grid Hybrid
1
• New Generation Outdoor SolutionMTS9000A
• PowerCube 1000 - Solar HybridPowerCube S1/S2/S3
• PowerCube 1000 - Diesel HybridPowerCube D1-Standard/D1-Advanced
• PowerCube 1000 - Grid HybridPowerCube G2/G3/G4/G4-Mini
• PowerCube 500IVS Solution
• Energy OSSNetEco
Large Capacity Power System100A-24,000A/6kW-1,440kW
Huawei new generation all-digital large capacity power systems
include TP483000D, TP482000B and TP481200B. Adopting high
power desity design and 1U 100A or 50A high efficiency rectifiers,
single rectiifer cabinet can output maximum 3000A/180kw. The
systems have tremendous features such as high reliability, high
efficiency, high power density, high capacity, low noise and easy
maintenance.
Introduction
• Carrier class high reliability, system MTBF over 500,000 hours,
passed over 1000 test items
• Green and energy saving, rectifier efficiency over 96%
• Compact design, single rectifier cabinet can output maximum
3000A/180kw,which is the highest in industry
• Huge system capacity, TP483000D can be expanded to 24,000A
by parallel combination matching network evolution, while
TP482000B expanded to 10000A and TP481200B expanded to
6000A
• Flexible remote monitoring mode, saving OPEX
Features
Legacy power system modernization
• Wireless network central office
• Fixed network central office
• Large capacity convergence site
• Enterprise network central office
• Data center
Application Scenarios
Newly-built scenario
TP481200B TP482000B TP483000D
Legacy power
Reuse AC & DC distribution
Reuse AC distribution All swap
Integrated Type Distributed Type
2
Specifications
Integrated large power system
Product style TP4812000B-N20C3 TP482000B-N20C5 TP482000B-L20B5
System
Dimension(W×D×H)
600mm×600mm×2000mm
Cabling mode Top inlet & outlet
Rated capacity 1200A(12×100A) 2000A(20×100A) 2000A(40×50A)
AC Distribution
Input mode220/380VAC, three phase four/five line (L1, L2, L3, PE or L1, L2, L3, N, PE)
120/208VAC, three phase four/five line
Input voltage 260VAC-530VAC, rated: 380VAC90VAC-290VAC, rated: 208VAC
Input capacity 2×150A/3P (MCCB) 2×150A/3P (terminal) 2×230A/3P (terminal)
DC Distribution
Battery branch 2×(1000A×2) (NT4) 2×(1000A×2) (NT4) 2×(1000A×2) (NT4)
Load branch6×500A(NT3), 6×160A(NT00), 6×100A(NT00)
6×500A(NT3), 6×160A(NT00), 6×100A(NT00)
6×500A(NT3), 6×160A(NT00), 6×100A(NT00)
Rectifier ModuleInput mode Three phase, 260VAC-530VAC 120V or 240V dual live wire
Rated capacity 100A/6000W 50A/3000W
Distributed large power system
Product style TP483000D
AC Distribution Cabinet
Cabinet style TPA38631B-N20B1 TPA38401B-N20B1
Dimension(W×D×H)
600mm×600mm×2000mm
Input mode 220/380VAC, three phase four/five line (L1, L2, L3, PE or L1, L2, L3, N, PE)
Input voltage 260VAC-530VAC, rated: 380VAC
Input capacity 1×630A/4P (two inputs/manual switchover) 1×400A/4P (two inputs/manual switchover)
AC output
6×160A/3P (MCCB)1×63A/3P (MCB)1×32A/3P (MCB)3×32A/1P (MCB)
4×160A/3P (MCCB)1×63A/3P (MCB)1×32A/3P (MCB)3×32A/1P (MCB)
DC Distribution Cabinet
Cabinet style TPD48302B-N20B1
Dimensions 800mm(W)×600mm(D)×2000mm(H)
Output voltage 42-58VDC, default value: 53.5VDC
Maximum capacity 3000A/180kW
Battery branch 2×(1250A×2) (NT4)
Load branch 8×500A(NT3), 4×400A(NT2), 4×200A(NT1), 8×160A(NT00), 6×100A(NT00)
Rectifier Cabinet
Cabinet style TPR48302B-N20C3 TPR48202B-N20C3
Dimensions(W×D×H) 600mm×600mm×2000mm
Rated capacity 3000A/180kW(30×100A/6kW) 2000A/120kW(20×100A/6kW)
3
Indoor Power System100A-600A/6kW-36kW
The indoor power systems include integrated power(built-in
batteries) and detached power(separated batteries), whose output
range varies from 100A to 600A. The series can accommodate
high efficiency rectifier modules and have outstanding monitoring
functions, and have been applied in multiple indoor scenarios.
Introduction
• High rectifier efficiency (>98%) and non-derating below 55ºC
help save energy
• Footprint saving, 50% footprint saved by integrated power, ‘0’
footprint for rack stack / wall-mounted of mini power
• Large housing ability, up to 8 BBUs accommodation
• Intelligent battery management prolongs battery lifespan
• Support in-band transmission networking, ‘0’ extra data
collector and transmission link cost
• All-in-one controller, MIMO* energy scheduling mgmt., 5 AI, 9
DI, 8 DO
• Support solar access, saving grid expenditure
• High-temp. battery saves 70%-80% site A/C consumption
Features
• Indoor site of access network
• Indoor site of convergence network
• Medium and small capacity central office
• Enterprise communication network
Application Scenarios
Combined Type
Integrated Type
TP48200B/400B/600B
TP48300B/TP48600B Mini TP48300B
Mini Power Detached PowerIntegrated Power
supporting solar evolution
supporting solar evolution
High temp. battery
Unified NetEco
*MIMO: Multiple energy input, multiple mode output
4
Integrated power system
Specifications
Product type TP48200B TP48400B TP48600B
Dimension(W×D×H)
600mm×600mm×2000mm 600mm×600mm×2000mm 600mm×600mm×2000mm
Rated capacity 200A 400A 600A
Battery space 16-32U(2-4×190Ah) 32U(4×190Ah) 24U(3×190Ah)
User space 0-16U N/A N/A
Input mode220V single phase380V three phase110V dual-wire
220V three phase380V three phase
220V three phase380V three phase
Load branchesLLVD: (MCB)5 branchesBLVD: (MCB)6 branches
LLVD: (MCB)10 branchesBLVD: (MCB)8 branches
LLVD: (fuse)4 branches+(MCB)10 branchesBLVD: (MCB)6 branches
Combined power system
Product type TP48300B TP48600B Mini TP48300B
Dimension(W×D×H)
600mm×400mm×1600mm 600mm×400mm×1600mm 442mm×360mm×480mm
Rated capacity 300A 600A 300A
Installation mode Antistatic floor/ ground installation Antistatic floor/ ground installationOn the battery rack, 19/21/23 inches open rack, ground, DFMU cabinet, wall-mounted
Input mode220V single phase380V three phase
220V three phase380V three phase
220V single phase380V three phase110V dual-wire
Load branchesLLVD: (fuse)7 branches+ (MCB)3 branchesBLVD: (MCB)4 branches
LLVD: (fuse)5 branches+ (MCB)7 branchesBLVD: (MCB)9 branches
LLVD: (MCB)8 branchesBLVD: (MCB)6 branches
5
Outdoor Power System100A-400A/6kW-24kW
TP48200A(TP48400A) is an AC/DC outdoor power system
that configures 48V/50A rectifier modules to supply rated of
200A(400A) output current, with various cooling system: heat
exchanger(HEX), direct ventilation(DV) and TEC cooling. The power
system has excellent performance such as wide range of AC input
voltage, high power efficiency, intelligent battery management and
remote monitoring.
Introduction
• Cooling capacity up to 1500W, operation temperature can be
-40ºC-45ºC, IP55 protect level, protect main equipment to be
safe and reliable
• High power efficiency of rectifier >98%, intelligent rectifier
dormancy, saving energy
• Support electronic labels, can be co-managed by HUAWEI main
equipment OSS, saving management and maintenance cost
• Intelligent battery management and online test, prolonging
battery lifespan
• Cooling system equipped in door, easy maintance
Features
TP48200A/TP48400A
Integrated Type
TP48200A
Separated Type
TBC300A
Separated Type
• Outdoor carrier’s wireless site power scenarios
• Outdoor enterprise communication network power scenarios
Application Scenarios
Typical outdoor DBS
Typical outdoor BTS
Typical outdoor DBS+BTS
BBU(2U)
POWER (6U)
WIRE(2U)
SPARE
BATTERY
BBU(2U)
RRU
RRU
…… POWER
(6U)
WIRE(2U)
SPARE
BATTERY
BBU(2U)
BBU(2U)
TMC
RFC
POWER (6U)
WIRE(2U)
SPARE
BATTERY
BBU(2U)
BBU(2U)
TMC
RFC
RRU
RRU
……
6
Separated power cabinet seriesProduct Type TP48200A-HX09A5 TP48200A-HX09A6 TP48200A-HX09A7
System capacity 200A
Dimension(W×D×H)
650mm×650mm×900mm
Cooling HEX(850W)
Input mode 220V single phase/380V three phase 110V dual-live wire N/A
User space 11U 15U
Separated battery cabinet series
Product Type TBC300A-DCA7 TBC300A-DCA6 TBC300A-TCA3
Dimension(W×D×H)
650mm×650mm×900mm
Cooling DV DV TEC
Battery space 16U(2×190Ah)
Heater With heater (500W) Without heater Heat by TEC
Integrated cabinet steel series(1.5m Height)
Product TypeTP48200A-
HD15A6TP48200A-
HD15A7TP48200A-
HD15A8TP48200A-
HD15A9TP48200A-
HT15A5TP48200A-
HT15A6TP48200A-
HX15A1
System capacity 200A
Dimension(W×D×H)
650mm×650mm×1500mm
Cooling HEX(850W)+DV HEX(850W)+TEC HEX(850W)
Input mode 220V/380V 110V 220V/380V 110V 220V/380V 110V 220V/380V
User space 9U 25U
Battery space 16U(2×190Ah) N/A
Heater N/A 500W N/A 500W Heat by TEC N/A
Integrated cabinet steel series(0.9m Height)Product Type TP48120A-HD09A1 TP48120A-HD09A2 TP48120A-HD09A3 TP48120A-HD09A4
System capacity 120A
Dimension(W×D×H)
650mm×650mm×1500mm
Cooling HEX(1500W) +DV HEX(850W) +DV
Input mode 220V/380V 110V 220V/380V 110V
User space 8U
Battery space 8U(1×100Ah)
Heater 500W(Optional)
Specifications
7
Wall-mounted Power System30A-60A/1.74kW-3.2kW
TP4860C and TP4860H are 2 types of wall-mounted power system,
which can convert from 220VAC single-phase or 110VAC dual-live
wire input to stabilized -48V DC output. Its largest capacity is 60A.
When configured with inverter, it can output -48VDC and 220VAC
simultaneously . It can be built in 20Ah/40Ah VRLA battery. It
provides great performance such as compact design, high efficiency
and flexible power backup.
Introduction
• High rectifier efficiency over 96% helps to save energy, output
without derated below 55ºC
• Support built-in inverter to output AC&DC simultaneously
• Support flexible installation mode, such as wall mounted, pole
mounted and grounding installation
• High protection level of IP55
• Low noise and high environment adaptability
Features
TP4860H
TP4860C
• Wireless coverage sites power supply
• WLAN power supply
Application Scenarios
Remote power supply Small site power supply
8
Wall-mounted power system
Type TP4860H TP4860C
System
Dimension(W×D×H)
450mm×300mm×580mm450mm (excluding 50mm protuberant part on the vent port)×300mm×630mm
Rated capacity DC: 1740W / 2000W / 3200W, AC: 700W (1000VAC)
Cooling mode Natural cooling DV
Installation mode Wall-mounted / floor-mounted Wall-mounted / pole-mounted / floor-mounted
Protection level IP21 IP55
AC Distribution
AC input 220VAC single phase or 110VAC dual-live wire
Inverter output (optional) 3 branches
AC SPD 20kA/40kA, 8/20µs
Signal port SPD 3kA/5kA, 8/20µs
DC Distribution
Maximum output 3200W
Battery branch 1 branch
BLVD 3 branches
DC SPD N/A 10kA / 20kA, 8/20µs
Rectifier Rated power 870W, 1000W or 1600W (optional)
Controller
Sensors interface Battery temperature, door, battery mid-point voltage check
Signal input 7 Digital input
Alarm output 4 Dry contact output
Communication port RS485 / RS232
Inverter (optional)Rated output 1000VA/700W
Working mode Default by DC input priority
Battery (optional)Rated capacity 20Ah/40Ah VRLA battery or 40Ah lithium battery
Normal voltage 12V
Specifications
9
Embedded Power System30A-400A/1.74kW-24kW
This series of embedded power products includes 5 types of
products: ETP4830, ETP4890, ETP48150, ETP48200 and ETP48400.
They can provide wide range of DC output from 30A to 400A,
and are very broad application in DC power system scenarios. The
functional unit using a standardized installation structure design,
power height ranging from 1U to 11U, compact design, support
19-inch rack or cabinet installation. The system can be adapted
to a wide range of AC input voltage, with intelligent battery
management, remote monitoring, etc.
Introduction
• High rectifier efficiency over 98% helps to save energy, derated
output above 55ºC
• Rectifier with MTBF > 500,000h helps to save OPEX
• E-label function, can achieve assets management of the whole
site, easy for assets management and location of problem quality
• Capacity covers 30A - 400A
• Smooth expansion of capacity from 200A to 400A and ACDB &
DCDB
• Only 5U for 200A system, 12kW/U high power density
• Support 19/21 inch standard rack
• Standard FE, RS485/232 port , supporting 5 AI, 9 DI, 8 DO
• Support MIMO (solar access, 24V output, etc.) evolution
Features
ETP4830
ETP4890
ETP48150
ETP48200
ETP48400
• Access network
• Transmission network
• Wireless base station
• Communication network of enterprise
Application Scenarios
Newly-built site Legacy site modernization
*MIMO: Multiple energy input, multiple mode output
10
Type ETP4830 ETP4890 ETP48150
System
Dimension(W×D×H)
442mm×255mm×43.6mm (1U)
442mm×255mm×86.1mm (2U)
442mm×255mm×130.5mm (3U)
Installation mode Installed on 19-inch rack or cabinet
Protection level IP20
AC DistributionInput mode
220VAC single phase or 110VAC dual-live wire
220/380VAC 3-phase or 220VAC single phase or 110VAC dual-live wire
SPD 5kA/10kA, 8/20us
DC Distribution
Maximum capacity 2kW 4.8kW 8kW
Battery breakers 1 branch 1 branch 1 branch
Load breakers 2 branches 4 branches 8 branches
Controller
Type SMU01A SMU01B SMU01C
Signal input 7 digital input, 2 analog input 2 digital input
Alarm output 8 dry contact output 4 dry contact output
Communication port RS232/485, FE RS232/485
Type ETP48200 ETP48400
System
Dimension(W×D×H)
482.6mm×330mm×222.5mm(5U) 442mm×330mm×489.5mm(11U)
Installation mode Installed on 19-inch rack or cabinet
Protection level IP20
AC Distribution
Input mode 220/380VAC 3-phase, 220VACsingle phase, or 110VAC dual-live wire
Input breakers 1 branch
Output breakers 1 branch 2 branches
SPD 30kA/60kA, 8/20us 5kA/10kA, 8/20us
DC Distribution
Maximum capacity 12kW 24kW
Battery breakers 2 branches
Load breakers Maximum 10 branches 16 branches
SPD 10kA/20kA, 8/20us
Controller
Signal input6 digital input, 1 door magnetism, 1 water logging, 1 smoke, 2 temperature, 1 battery temperature, 1 environment temperature and humidity
Alarm output 8 dry contact output
Communication port RS232/485, FE
Small and medium capacity embedded power system
Large capacity embedded power system
Specifications
11
SMU02B is a type of high-end monitoring unit for site and power.
It can monitor and manage telecom power system, and provides
site monitoring function. LCD screen and keyboard are equipped
in the unit to realize man-machine interaction. It has a serial
communication port and an Ethernet port to realize local and
remote monitoring. SMU02B supports the monitoring management
of HUAWEI’s power system series, including embedded power,
indoor power and outdoor power system.
Introduction
• Performs comprehensive power management and intelligent
battery management
• Grid quality detection
• Support time, voltage, capacity disconnecting protection and
LLVD1, LLVD2, BLVD
• Supports north CAN and FE ports accessing and support SNMP
protocol through FE interface
• Support local display and configuration by LCD screen or HTTPS
browsing
• Supports electronic label function
• Support remote management and remote software upgrade from
NetEco
• Supports downloading historical logs and statistics data
• Provides 5 analog inputs(AI), 12 dry contact outputs(DO) and 9
Boolean value inputs(DI)
• Provides multiple ports accessing, such as smoke sensor, door
status sensor, water sensor, battery temperature sensor, ambient
temperature and humidity sensor
• Supports multiple languages, such as English, Chinese, Turkish,
Spanish, Portuguese and German
• Supports hot plug
Features
Full Series of Monitoring Modules SMU02B
SMU02B
12
ECC500(Energy Control Center) is a central control unit of
PowerCube system, which adopts advanced power conversion
technology and intelligent management to maximize efficiency
of energy utilization. It consists of main control module, basic I/
O module, expansion I/O module, GPRS module(optional), D.G.
control module(optional) and one reserved slot.
Introduction
• Unified controller with comprehensive data acquisition function
• Supports multiple energy input and adopts advanced energy
scheduling strategic to matching different hybrid power
application scenario.
• Supports comprehensive management of power, energy storage
system, environment and intelligent equipments.
• Support remote management and remote software upgrade from
NetEco.
• Support local display and configuration by LCD screen or HTTPS
browsing
• Support time, voltage, capacity disconnecting protection and
LLVD1, LLVD2, BLVD
• Supports electronic label function
• Supports downloading historical logs and statistics data
• Provides multiple ports accessing, such as smoke sensor, door
status sensor, water sensor, battery temperature sensor, ambient
temperature and humidity sensor
• Supports multiple languages, such as English, Chinese, Turkish,
Spanish, Portuguese and German
• Supports hot plug
• Support extended IO port
• Support GPRS communications with NetEco server
Features
Full Series of Monitoring ModulesECC500
ECC500
13
Specifications
HUAWEI 1U height rectifier module with high efficiency and high
power density can cover the output capacity from 15A to 100A
or from 870W to 6000W. Rectifier efficiency is over 96%, and has
tremendous features such as high reliability, high power density, soft
start, excellent input and output protection, low noise and multi-
module paralle.etc. HUAWEI rectifier modules are widely applied in
HUAWEI -48VDC power system such as embedded power, outdoor
power, indoor power and large power system.
Introduction
• Full series of high efficiency modules, applied in multiple
scenarios
• Efficiency over 96%, energy saving
• 1U height, high power density
• MTBF over 500,000hours, high reliability
• Excellent grid and environment adaptability
Features
Full Series of Rectifier Modules15A-100A/870W-6,000W
Module style Dimensions (H×W×D) Efficiency Input voltage Output power
R4850S 40.8mm×105mm×281mm 98%85-300VAC, 220V single phase or 110V dual live lines
3000W
R4815G140.8mm×95.5mm×208mm
>96%
85-300VAC, 220V single phase or 110V dual live lines
870W
R4830G1 1600W
R4830G240.8mm×105mm×281mm
2000W
R4850G2 3000W
R48100G1 43mm×238mm×378mm 260-530VAC, three phase three line 6000W
R4815G
R4830G1
R4830G2
R4850G
R48100G
R4850S
14
HUAWEI advanced Energy Storage Modules(ESM) are a type of
lithium iron phosphate battery integrated with management
system. As an important module of PowerCube diesel hybrid
solution and grid hybrid solution, ESM can be used in off grid
and unstable grid areas. With fast charging adaptability and long
lifespan, ESM can sharply reduce the D.G. running time and O&M
cost comparing with traditional solutions.
Introduction
• High charge acceptance to ensure rapid and complete recharge
• Long shelf life up to 2 years at 35ºC due to low self-discharge
• Good performance at high temperature up to 55ºC
• Support parallel use and maximum capacity of 28.8kWh in
parallel
Features
Full Series of Advanced Energy Storage ModulesESM-A2400Wh(D), ESM-A9600Wh(N)
Specifications
ESM-A2400Wh(D) ESM-A9600Wh(N)
Nominal Voltage 48V
Operating Voltage 47V-58V DC
Charging Voltage@ 25ºC 56.4V
Recommended Operating Temperature 25ºC-35ºC
Self Discharge @ 25ºC Less than 5% after 90 days storage
Nominal Capacity 2400Wh@ 5hr, 25ºC 9600Wh @ 5hr, 25ºC
Total Weight Approx. 42.5kg Approx. 125kg
Maximum Charging Current Limited 50 A 100 A
ESM-A Dimension(WxDxH) 435mmx420mmx125 mm 440mmx500mmx500mm
ESMU Dimension(WxDxH) 444mmx310mmx44.5mm
ESM-A2400Wh(D)
ESM-A9600Wh(N)
15
Huawei new generation telecom power solution (MTS9000A) ensures carriers realize network easy deployment, site level
saving, efficient O&M and smooth evolution for its easy, intelligent and high efficiency performance. Huawei MTS system
highly integrates power system, cooling system, site monitor system and housing system to provide safe and reliable
environment for main equipment.
MTS9000A solution could be widely used in outdoor sites.
• wireless coverage site
• Transmission node site
Introduction
Huawei new generation telecom power solution MTS9000A
provides plentiful intelligent management functions to make
telecom power system easy and high efficiency.
Solution
New Generation Telecom Power SolutionMTS9000A
MTS9000A
SOH SOCSOH management
MTS9000A provides SOH management based on monitoring
battery cell SOH & SOC (Status of health, status of charge) in real
time, to prolong battery serving life and avoid site power failure.
Access control management
MTS9000A Intelligent access control management system makes
the O&M easier and safer. The electrical lock on the cabinet is
designed to be opened by:
• authorized card within valid period
• mobile APP with authorized username and password
• NetEco remotely
Smart capture
To reduce carrier investment loss due to illegal invasion, MTS9000A
provide intelligent photograph capture function against illegal
activities. The camera mounted on the top of inner cabinet will take
a series of pictures automatically while invasion, and the pictures
will be sent to OSS center(NetEco) immediately
16
Site energy efficiency management
Huawei MTS9000A solution provide energy information collecting
sensors on site to measure energy input and output, the data will
upload to NetEco server for SEE analysis. NetEco could show SEE
status on multiple customized views.
Mobile APP management
Mobile APP management is a new innovative OSS auxiliary function
supported by MTS9000A, customer can not only maintain telecom
site in mobile APP through OSS server, but also log on though WIFI
module integrated in MTS9000A while arrived site. With the help
of mobile APP, customer could realize network management at
anywhere and anytime.
• Easy land acquisition for its compact figure, knockdown type cabinet and Multiple energy input & output
• Intelligent O&M, Overall energy system and environment monitoring and convenient mobile app supported
• Easy Evolution, All modular design, easy expansion and upgrading
• High efficiency, High efficiency rectifier and site & network level efficiency management
Benefits
17
Accessories
Battery SOC & SOH management
Item iBox
Parameters
Dimension 110mm×142mm×10mm(L×W×H)
Installation Cabinet interior side wall
Working Voltage 12V ± 2V
Working Current Less than 100mA
CommunicationNorthbound interface: ModbusSouthbound interface: Zigbee
Camera
Item Camera
Parameters
Pixels 0.3 Million
Lens 6mm infrared
Output Format JPEG
Night Vision Monochrome image, 6m distance
Communication RS485, Modbus,
Working Voltage DC 9-15V
Working Current Less than 100mA( night vision, less than 300mA)
Working temperature -20˚C to 70˚C
Intelligent Electronic Door Lock
Item eLock
Parameters
Working Voltage 12V ± 20%
Working Current Less than 60mA
Unlock Magnetic card, Live APP, OSS, LUI on site
Record Unlock time and authorization number
IP level Closed status: IP55
AC Meter
Item AC Meter
Parameters
Working Voltage 36 to 72 VDC
Working Current Less than 100mA
Detecting Voltage Range 90 to 300VAC
Detecting Current Range 0 to 75A
AC PUE Measurement Precession
±1%
EFUSE
Item EFUSE
Parameters
Dimension 442mm×42mm×300mm(W×H×D)
Distribution 10 Routes, up to 20A/route (5,10,15,20A configurable)
SPD Differ mode: 10kA, ComVmon mode: 20kA; 8/20µs
Working Voltage 40 to 60VDC
Maximum Current 100A
18
Product ModelMTS9510A
(Mini-shelter)MTS9512A MTS9513A
Cabinet
Base Dimension (W x D)
815mmx735mm
Height 1.4m, 2.0m, 2.3m 2.0m 2.0m
Application modeEquipment cabinetBattery cabinetIntegrated cabinet
Integrated telecom energy solution
Cooling modeHEX (Only for equipment cabinet and integrated cabinet)DV/TEC (Only for battery cabinet)DC/AC Aircon
Maintenance Front operation & maintenance
Panel material Sandwich panel
Battery shelf 2/3/4 Layers
Protection level IP55 for Aircon and HEX, IP45 for DV
EmbeddedPower
Power Model N/AETP48200-C5B4/C4
ETP48200-C5B5/C3
ETP48200-C5C5 ETP48300-C6A1
Capacity N/A 200A 200A 200A 300A
Input voltage N/A 220/380V 110V dual live 220/380V 220/380V
Input frequency N/A 45Hz to 66Hz
AC input N/A MCB:1×63A/3P MCB:1×100A/2P N/A
AC input SPD N/A 30kA/60kA (8/20µs) N/A
Dimension N/A 5U 6U
Rectifier capacity N/A 3000W
Rectifier efficiency N/A >96%
DC distribution N/A
LLVD: 2×80A/1P, 3×32A/1PBLVD: 1×63A/1P, 3×32A/1P, 1×16A/1P Battery breaker: 2×125A/1P
LLVD: 2×80A/1P, 3×32A/1PBLVD:1×63A/1P, 2×32A/1P, 1×16A/1P Battery breaker:2×125A/1P
LLVD: 2×80A/1P, 9×32A/1PBLVD:1×63A/1P, 3×32A/1P, 4×16A/1P Battery breaker: 2×125A/1P
LLVD: 2×80A/1P, 9×32A/1PBLVD: 1×63A/1P, 3×32A/1P, 1×16A/1P Battery breaker:4×125A/1P
Advanced Features
Optional Features N/A
• Battery SOH management• Access control management• Smart capture• Mobile APP management• Site energy efficiency management (unavailable for ETP48300-C6A1)(Above features are unavailable for ETP48200-C5B4/B5)
Environment
Operation temperature
-40˚C to +50˚C -40˚C to +55˚C -40˚C to +45˚C
Storage & transportation temperature
-40˚C to +70˚C
Humidity 5% to 95%
Battery(optional)
Specification 12V/2V 12V 12V 12V 12V
Capacity Max. 4x190Ah Max. 3x190Ah Max. 2x190Ah Max. 2x190Ah Max. 2x190Ah
Specifications
19
Hybrid Power-Solar HybridPowerCube S1: Pure Solar Solution
Pure solar hybrid solution is currently the most favored choice for green power solutions in many regions for low and medium
load sites.
Introduction
• ‘Zero’ OPEX, ‘Zero’ CO2 emission
• More PV panels saving with advanced SolarMax MPPT(Maximum Power Point Tracking) tech.
• Multi-anti-theft design to protect assets
Benefits
• Mountainous areas and isolated islands where the topography is complicated and transportation is inconvenient
• Scenic spots which require environment protection.
Scenarios
High Efficiency PV Module: 15%
High-temperature Tolerant Solar Cycle Battery
High Precision MPPT: Upto 99.8%
United Controller with Advanced SolarMax Technology
20
Configuration
Solution 1 (Outdoor) Solution 2 (Outdoor) Solution 3 (Outdoor) Solution 4 (Indoor)
Typical Power Load <0.8kW < 3kW
ControllerMPPT(Maximum Power Point Tracking) box
ECC500(Energy Control Center) with MPPT(Maximum Power Point Tracking) module
Installation Type Pole-mounted Ground-mounted
Capacity of SSU N/A Max. 8x50A SSU
Capacity of PV Module Max. 3,000Wp Max. 24,000Wp
BLVD 1x32A, 2x10A 2x80A, 2x63A
LLVD N/A 4x32A, 2x16A, 1x10A
Cooling for Equipment Natural cooling HEX
EcoCool / Split DC Aircon
Cooling for Battery Natural cooling Natural cooling
Cabinet ICC100 ICC350 ICC310 ICC200
Remaining Space N/A 7U 26U 31U
Battery Model and Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)SCB-A (Solar Cycle Battery): 200/300/500/600/800Ah (Max. 4 groups)
Key TechnologySolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efficiency of 98.50%, high temperature adaptability and high sensation of light.
21
Hybrid Power-Solar HybridPowerCube S2: Solar & Diesel Solution
Solar & D.G. hybrid solution is applicable for modernization of legacy diesel powered sites with medium and high
load in outlying areas.
Introduction
• High reliability
• Maximum usage of solar energy with leading algorithm design
• Excellent TCO performance with optimized PV & IDG combination
Benefits
• Areas where sunshine duration fluctuates greatly in each month
• Modernization of legacy D.G. powered sites with limited footprint
• Systems requiring high reliability requirements
Scenarios
High Pillar Structure & Anti-theft Bolts
IDG: Integrated Diesel Generator High Efficiency Rectifier: Upto 96%
United Controller with Advanced SolarMax Technology
22
Configuration
Solution 1 (Outdoor) Solution 2(Indoor)
Typical Power Load <3.5kW
Controller ECC500(Energy Control Center)
Installation Type Ground-mounted
Distribution Capacity Max. 8x50A (SSU+PSU)
Capacity of PV Module Max. 24,000Wp
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
Integrated Diesel Generator Capacity
10/14kW with 3W+N; 11.5/16kW with dual-live wire or reuse
Cooling for Equipment HEX
EcoCool / Split DC aircon
Cooling for Battery Natural cooling
Cabinet ICC350 ICC310 ICC200
Remaining Space 7U 26U 31U
Battery Model and Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups)DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups)
Key TechnologySolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efficiency of 98.50%, high temperature adaptability & high sensation of light.
23
Hybrid Power-Solar HybridPowerCube S3: Solar & Grid (Diesel)
Solar & Grid hybrid solution is applicable for medium and high load sites with grid connection.
Introduction
• High reliability
• Solar energy is priority
• Low TCO, less maintenance costs
Benefits
• Areas having unstable grid, Solar energy acts a complement to the unstable grid
• Scenarios where Mains supply needs to blend with sustainable energy solution to cut down emission
Scenarios
United Controller with Advanced SolarMax Technology
Carrier Class Reliability, Complete SPD Design
24
Configuration
Solution 1 (Outdoor) Solution 2 (Indoor)
Typical Power Load <3.5kW
Controller ECC500(Energy Control Center)
Distribution Capacity Max. 8x50A (SSU+PSU)
Capacity of PV Module Max. 12,000Wp
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
AC Input 220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
Integrated Diesel Generator Capacity
10/14kW with 3W+N; 11.5/16kW with dual-live wire
Cooling for Equipment HEX
EcoCool / Split DC Aircon
Cooling for Battery Natural cooling
Cabinet ICC310 ICC200
Remaining Space 26U 31U
Battery Model and Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups)DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups)DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups)
Key TechnologySolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efficiency of 98.50%, high temperature adaptability & high sensation of light.
25
Hybrid Power-Diesel HybridPowerCube D1-Standard & D1-Advanced
Diesel hybrid solution is suitable for medium and high load sites with high reliability requirement.
Introduction
• Up to 75% fuel saving and 90% D.G. running time saving
• Up to 97.5% D.G. maintenance cost saving
• Smooth evolution to Solar Hybrid Solution
Benefits
• Modernization of legacy D.G. powered sites with low load rate
• Areas where Diesel-powered site OPEX is comparatively less than that of the Solar site
• Areas lacking professional D.G. maintenance engineers
Scenarios
United Controller with Advanced DieselMax
Technology
Integrated Diesel Generator
Fuel Level Sensor 5 Levels of Anti-theft Structure Design
Deep Cycle Battery
26
Configuration
D1-Standard(Outdoor)
D1-Standard(Indoor)
D1-Advanced(Outdoor)
D1-Advanced(Indoor)
Typical Power Load <5kW
Controller ECC500(Energy Control Center)
System Capacity Max. 6x50A PSU(Standard)Max. 8x50A PSU(Co-site)
Max. 8x50A PSU Max. 6x50A PSU Max. 8x50A PSU
Integrated Diesel Generator Capacity
10/14kW with 3W+N; 11.5/16kW with dual-live wire(standard/advanced), 10/14kW with 3W+N;(Co-site)
Integrated Fuel Tank Capacity
800L
BLVD 2x80A, 2x63A(standard/advanced), 1x63A/tenant, total for 4 tenants(Co-site)
LLVD 4x32A, 2x16A, 1x10A(standard/advanced), 1x63A,2x80A/tenant, total for 4 tenants(Co-site)
AC Input 220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire
Cooling for Equipment HEX
EcoCool / Split DC Aircon
HEX
EcoCool / Split DC Aircon
Cooling for Battery DC Aircon / Free cooling DC Aircon / Free cooling
Cabinet ICC500 ICC 900 ICC200 ICC500 ICC900 ICC200
Remaining Space 12-14U 19-29U 31U 14U 31U
Battery Model and Capacity
TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 2 groups)DCB-A (Deep Cycle Battery): 300/420/490/600Ah (Max. 2 groups)DCB-B (Deep Cycle Battery): 200/300/500/650Ah (Max. 2 groups)
For ICC500,ESU-A (Advanced Energy Storage Unit),Max. 2x200AhFor ICC900,ESU-A (Advanced Energy Storage Unit),Max. 3x200Ah + 2x150Ah backup batteries(optional)
Key TechnologyDieselMax Technology includes features such as dynamic load algorithm, high AC to DC conversion efficiency of 96% and high charging/discharging efficiency of 96%
27
Hybrid Power-Grid HybridPowerCube G2: Advanced Fast Charging Solution
Advanced fast charging system is feasible when electricity grid is unreliable and outage time is short but frequent.
Introduction
• Fast charging: Full charging < 2hrs
• Energy storage: 4-5 years lifespan
• ‘Zero’ D.G. running time or removing D.G.
• Smooth evolution to Solar Hybrid Solution
Benefits
• Modernization of Grid plus backup D.G. powered sites
• Areas lacking professional D.G. maintenance engineers
Scenarios
United Controller with Advanced GridMax Technology
Advanced Energy Storage Unit
28
Configuration
G2 (Outdoor) G2 (Indoor)
Typical Power Load <5kW
Controller ECC500(Energy Control Center)
AC Input 220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
System Capacity Max. 6x50A PSU Max. 8x50A PSU
Cooling for Equipment HEX
EcoCool / Split DC Aircon
Cooling for Battery DC Aircon
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
Cabinet ICC500 ICC900 ICC200
Remaining Space 14U 14U 31U
Battery Model and Capacity
ESU-A (Advanced Storage Energy Unit): 200Ah (Max. 2 groups)
ESU-A (Advanced Storage Energy Unit): 200Ah (Max. 3 groups)
ESU-A (Advanced Storage Energy Unit): 200Ah (Max. 4 groups)
Key Technology GridMax Technology includes features such as fast charging, step charging and high adaptability
29
Hybrid Power-Grid HybridPowerCube G3: Enhanced Fast Charging Solution
Enhanced fast charging system is used for areas where electricity grid not only faces often short outages but also
seldom abnormal long outages.
Introduction
• Fast charging: Full charging < 3hrs
• Energy storage: 4-5 years lifespan
• ‘Zero’ D.G. running time or removing D.G.
• Smooth evolution to Solar Hybrid Solution
Benefits
• Modernization of Grid plus backup D.G. powered sites
• Areas lacking professional D.G. maintenance engineers
Scenarios
United Controller with Advanced GridMax technology, Unique Control Algorithm of Hybrid Energy Storage
Hybrid Energy Storage
30
Configuration
G3 (Outdoor) G3 (Indoor)
Typical Power Load <5kW
Controller ECC500(Energy Control Center)
System Capacity Max. 6x50A PSU Max. 8x50A PSU
AC Input 220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
Cooling for Equipment HEXEcoCool / Split DC Aircon
Cooling for Battery DC Aircon
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
Cabinet ICC500 ICC900 ICC200
Remaining Space 14U 9U 28U
Battery Model and Capacity
ESU-A (Advanced Storage Energy Unit): 50Ah.FCB-A (Fast Charging Battery): 200/300/400/500/650Ah
Max. 2x50Ah ESU-A + 1x400Ah FCB-A
Max. 3x50Ah ESU-A + 1x650Ah FCB-A
Max. 3x50Ah ESU-A + 1x650Ah FCB-A
Key TechnologyGridMax Technology includes features such as fast charging,step charging and high adaptability.
31
Hybrid Power-Grid HybridPowerCube G4: Standard Fast Charging Solution
Standard fast charging system is suitable for areas where electricity grid has seldom daily outages.
Introduction
• Fast charging: Full charging < 4hrs
• Energy storage: 3-4 years lifespan
• ‘Zero’ D.G. running time or removing D.G.
• Smooth evolution to Solar Hybrid Solution
Benefits
• Modernization of Grid plus backup batteries powered sites
• New-building sites in unstable grid areas
Scenarios
Fast Charging Battery
Split DC Aircon
United Controller with Advanced
GridMax Technology
32
Configuration
G4 (Outdoor) G4 (Indoor)
Typical Power Load <5kW
Controller ECC500(Energy Control Center)
System Capacity Max. 6x50A PSU Max. 8x50A PSU
AC Input 220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire
Cooling for Equipment HEX
EcoCool / Split DC Aircon
Cooling for Battery DC Aircon / Free cooling
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
Cabinet ICC500 ICC900 ICC200
Remaining Space 12U 27U 31U
Battery Model and Capacity
FCB-A (Fast Charging Battery): 200/300/400/500/650Ah
Max. 1x650Ah FCB-A Max. 2x650Ah FCB-A Max. 1x650Ah FCB-A
Key Technology GridMax Technology includes features such as fast charging, step charging and high adaptability.
33
Hybrid Power-Grid HybridPowerCube G4 Mini: Mini Standard Fast Charging Solution
Mini-Standard fast charging system is suitable for areas where the electricity grid suffers from weekly multiple
longtime outages.
Introduction
• Fast charging: Full charging < 4hrs
• Energy storage: 2-3 years lifespan
• ‘Zero’ D.G. running time or removing D.G.
• Smooth evolution to Solar Hybrid Solution
Benefits
• Modernization of Grid plus backup batteries powered sites
• New-building sites in unstable grid areas
Scenarios
United Controller with Advanced GridMax technology
Fast ChargingBattery (12V per cell)
34
Configuration
G4 Mini (Outdoor) G4 Mini (Indoor)
Typical Power Load <3kW
Controller ECC500(Energy Control Center)
System Capacity Max. 6x50A PSU Max. 8x50A PSU
AC Input 220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire
Cooling for Equipment HEX
EcoCool / Split DC Aircon
Cooling for Battery Free Cooling
BLVD 2x80A, 2x63A
LLVD 4x32A, 2x16A, 1x10A
Cabinet ICC330 ICC200
Remaining Space 8U 31U
Battery Model and Capacity
FCB-B (Fast Charging Battery): Max. 2x150Ah FCB-B (Fast Charging Battery): Max. 4x150Ah
Key Technology GridMax Technology includes features such as fast charging, step charging and high adaptability
35
Intelligent Video Surveillance Power SolutionPowerCube500: IVS Solution
Intelligent video surveillance demands grow rapidly. HUAWEI IVS solution can be applied in various scenarios from good
grid, poor grid to off grid.
• National security infrastructure demands in terms of border monitoring, fortress spot protecting and website facility
management will adopt the IVS system, which sites grid are unavailable.
• As energy saving and environment friendly demands, in densely populated areas will adopt the IVS system, especially
in city, road, square, scenic spot etc.
Introduction
• Higher efficiency, energy saving, green & environment friendly
• Simplified configuration
• Easy deployment and footprint saving, pole-mounted or ground installation supported
• Anti-theft design and assets protected
Benefits
• Modernization of Grid plus backup batteries powered sites
• New-building sites in unstable grid areas
Scenarios
Integrated cabinet,
including battery,
power converter, etc.
Camera
Grid hybrid IVS solution
Integrated cabinet,
including battery,
power converter, etc.
Camera
Solar Panel
Solar hybrid IVS solution
36
None Backup Time Short Backup Time Long Backup Time Off Grid
Typical Power Load <300 W <150 W <150 W <80 W
Power Supply Source Grid Grid + Battery Grid + Battery Solar + Battery
Autonomy Time 0 Hours 2 Hours 12 Hours 72 Hours
Installation Mode (Cabinet)
Pole Mounted Pole MountedPole Mounted/Ground Installation
Pole Mounted/Ground Installation
Height of Pole Typical 6m
Maximum PV Capacity N/A 800Wp
Input AC Voltage 110/220 V N/A
SPDAC port: 5kA/10kA, FE port: nominal 2kA/6kV
Output VoltageDC12VOptional (DC48V PoE, AC 24V, AC 220V)
Protection Level IP55
Configuration
Solution 1 Solution 2 Solution 3 Solution 4
37
Site Energy Management SpecialistiManager NetEco (Site)
Network Availability = Communication Availability * Transmission Availability * Energy Availability
Site will be out-of-service during energy interruption. Well managed perfect communication equipment and well
managed perfect transmission equipment together with perfect energy system are not necessarily bring high network
availability and satisfied revenue, unless energy system is simultaneously well managed.
Conventional inefficient manpower-based O&M mode can not meet in depth needs of increasing network scale and
diversified types of energy supply and consumption.
Facing cutthroat competition, we never must be considered as they are now of meticulous management for electricity,
fuel, efficiency and asset, to improve profitability by cutting OPEX.
Introduction
• Better back high efficient O&M, makes O&M visible, controllable and manageable; realize automation and information,
reduce manpower site visit; assists preventative maintenance, provides prediction and expert suggestion.
• Improves power availability, ensures smooth communication, improves QoS and QoE; drives revenue and subscribers
increasing.
• Makes site energy saving manageable, controllable and measureable; supports PUE analysis and optimization.
Benefits
NetEco is innovated to adapt to these strategies, it is a centralized remote OSS solution for site energy equipment. The
following diagram indicates the unique features and customer values of NetEco solution.
Scenarios
Flexible Server Options: NetEco
Hybrid Power Systems Site Power SystemsAdaptable to diversified scenarios
Saving Site data acquisition devices-free
Transmission-SavingIn-band networking solution
Flexible and Stable Out-of-band networking solution
Small-scale (<=1000 Sites)
Medium-scale (<=2000 Sites)
Large-scale(<=5000 Sites)
Northbound
Out-of-bandGPRS/IP/E1
In-bandGreen Channel OR
Networking
Mobile APP
Grid HybridDiesel Hybrid
Indoor Power Outdoor PowerEmbedded
PowerSolar Hybrid
3rd Party System
38
Items Specifications and/or Features
System Capacity Small scale Medium scale Large scale
1,000 sites per server 2,000 sites per server 5,000 sites per server
Networking modeIn-band transmission Out-of-band transmission
For some Huawei 3900 G/U/L serials macro sites IP, GPRS, E1, etc.
Integration with 3rd party
Alarm SNMP northbound interface: supports SNMP v1, SNMP v2c, and SNMP v3; Performance SNMP northbound interface, based on SNMPv3
Platform function Supports management of multiple time zones, data backup and restore, online help
Real-time monitoring GIS site Map (based on Google Map), real-time monitoring, GUI, power supply logics, customized real-time counter subscription and my workspace
Alarm management Alarm collection and storage, alarm browse, alarm notification, alarm processing, alarm setting, dry contact alarm management, alarm masking and alarm thresholds setting
Configuration Mgmt. Site controller discovery, graphical drag and drop site configuration, batch sites copy and batch parameters modification, site parameter setting by SMS; configuration data export to EXCEL
Performance and Report
Historical data collection, query, statistical analysis, report management; customized report, automatic periodic report
Security management Network security management, role and operation authority management, user and password management, operation authentication, log management, ECC500-based video capture
Asset management Inventory data management, asset anti-theft
Value-added featuresOverall network battery management, overall network diesel generator and fuel management, site DC power sharing, Diesel Max II efficiency optimization
Preventative maintenance
Early-warning: reduces the probability of power failure Maintenance reminder: D.G. refueling, defected battery changing, etc.
Prospective PredictionOperating time prediction: D.G. fuel capacity, battery backup time, etc. Lifespan prediction: Battery remain capacity, discharge times, etc.
Configuration
Remarks: Features are constrained to the configuration of site hardware and controller software, as well as NetEco versions.
Migrate Towards Simplicity
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
General Disclaimer
The information in this document may contain predictive statements including,
without limitation, statements regarding the future financial and operating results,
future product portfolio, new technology, etc. There are a number of factors
that could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information
is provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice.
Trademark Notice
, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Version No.: M3-022333-20141109-C-1.0
www.huawei.com
Global Recognition, Market Share No.124.7% Market Share of Global Telecom Power in 2013, NO.1 in Industry.
1,600,000+ power system, 170+ countries, 310+ operators
130+ service branches, 1,100+ professional partners, 7×24 hours service
Data Resource: Frost & Sullivan
DC Power
Global Product Leadership
Award for DC Power Market
Frost & Sullivan
98% Efficiency Rectifier
Recommended Excellent
Solution Award
CIC
Recommended