METALWORKING - Next Industries...13870 Cavalier Drive Shelby Township, MI 48315 PHONE (MI):...

13870 Cavalier DriveShelby Township, MI 48315

www.NextInd.com PHONE (MI): 586-803-3163 PHONE (KY): 270-888-7001

METALWORKING

Size Flutes Thread Limit Order No. 8-32 2 H-2 12635-1012369 8-36 2 H-2 12635-1012375 10-32 2 H-3 12635-1012383 1/4-20 2 H-3 12635-1010292 1/4-28 2 H-3 12635-1010299 5⁄16-18 2 H-3 12635-1010306 5⁄16-24 3 H-3 12635-1010313 3/8-16 3 H-3 12635-1010320 3/8-24 3 H-3 12635-1010324 7⁄16-14 3 H-3 12635-1010328 7⁄16-20 3 H-3 12635-1010332 ½-13 3 H-3 12635-1010336 ½-20 3 H-3 12635-1010340 5/8-11 3 H-3 12635-1010342 5/8-18 3 H-3 12635-1012774 ¾-10 3 H-3 12635-1010344 ¾-16 3 H-3 12635-1012775

Union Butterfield - Bright • General purpose taps for use in a wide variety if materials • Versatile taps for use in both hand or machine tapping in through or blind hole application

• Plug chamfer - 3 to 5 threads • High speed steel - ground thread

SPIRAL POINT TAPS - PLUG STYLE HIGH SPEED STEEL

SIX FLUTE SOLIDCARBIDE COUNTERSINK

• Conventional relief design • Heat resistant when used for high speed applications • Good rigidity • Can be used on cast iron, plastic, wood, nonferrous, and aluminum

DIA Angle OAL Shank DIA Order No. 1/8 60° 1-½ 1/8 11581-74049 1/8 82° 1-½ 1/8 11581-74149 1/8 90° 1-½ 1/8 11581-74249 3⁄16 60° 2 3⁄16 11581-74052 3⁄16 82° 2 3⁄16 11581-74152 3⁄16 90° 2 3⁄16 11581-74252 1/4 60° 2 1/4 11581-74055 1/4 82° 2 1/4 11581-74155 1/4 90° 2 1/4 11581-74255 3/8 60° 2-¹³⁄16 1/4 11581-74058 3/8 82° 2-¹³⁄16 1/4 11581-74158 3/8 90° 2-¹³⁄16 1/4 11581-74258 ½ 60° 2-7/8 1/4 11581-74061 ½ 82° 2-7/8 1/4 11581-74161 ½ 90° 2-7/8 1/4 11581-74261 5/8 60° 3 3/8 11581-74064 5/8 82° 3 3/8 11581-74164 5/8 90° 3 3/8 11581-74264 ¾ 60° 3 ½ 11581-74067 ¾ 82° 3 ½ 11581-74167 ¾ 90° 3 ½ 11581-74267 1 60° 3-1/4 ½ 11581-74070 1 82° 3-1/4 ½ 11581-74170 1 90° 3-1/4 ½ 11581-74270

Style Cutter DIA Shank DIA LOC Order No. SA-43 1/8 1/8 9⁄16 11541-10653SA-51 1/4 1/8 ½ 11541-10678SA-1 1/4 1/4 5/8 11541-10003SA-5 ½ 1/4 1 11541-10173SA-6 5/8 1/4 1 11541-10203SA-7 ¾ 1/4 1 11541-10253Ask about our complete offering of burrs

CYLINDER SHAPE SOLID CARBIDE BURRSA STYLE DOUBLE CUT

Size Flutes Thread Limit Order No. M5 x 0.8 2 D4 12635-1012672M6 x 1.0 2 D5 12635-1012674M7 x 1.0 2 D5 12635-1012676M8 x 1.25 2 D5 12635-1012678M10 x 1.5 3 D6 12635-1012682M11 x 1.5 3 D6 12635-1012685M12 x 1.75 3 D6 12635-1012686M14 x 2.0 3 D7 12635-1012689M16 x2.0 3 D7 12635-1012693M18 x 2.5 3 D7 12635-1012696

Union Butterfield - Bright • General purpose taps for use in a wide variety if materials • Versatile taps for use in both hand or machine tapping in through or blind hole application

• Plug chamfer - 3 to 5 threads • High speed steel - ground thread

METRIC SPIRAL POINT TAPS - PLUG STYLE HIGH SPEED STEEL

GENERAL PURPOSE JOBBER DRILL SETS

• HSS • 118° Point • Bright finish improves chip flow in soft or non-ferrous materials

• Steam Oxide reduces wear and chip welding in harder or ferrous materials

• Cobalt drills - use for drilling tough, high tensile strength material such as stainless, titanium and Inconel. 135° split point is self-centering and reduces thrust.

Finish Order No. Bright 12634-090162 Steam Oxide 12634-099977 Cobalt 12634-090290

Sale Price$78.95$78.95 $149.95

Sale Price$11.05$11.05$11.25$13.25$13.05$14.50$14.85$14.85$15.35$26.55$29.95$27.85$33.45$38.85$31.45$38.85$40.05$40.05$59.95$60.50$61.35$75.75$89.95$74.50

Sale Price$3.95 $4.50 $3.95 $3.95 $3.95 $4.15 $4.15 $4.95 $5.25 $8.40 $8.40 $8.65 $9.95 $19.25 $19.25 $26.94 $32.95

Sale Price$5.05 $5.05 $5.85 $5.85 $9.65 $9.65 $11.75 $17.65 $20.75 $32.95

Sale Price$5.25$8.95$8.95$18.95$23.95$34.95

SINGLE END SQUARE & BALLNOSE END MILLS REGULAR LENGTH / ALTiN COATED

• Center cutting • Micro grain carbide end mills for enhanced tool life • Great end mills for slotting and milling

Size Flute Length OAL Square End No. Ball Nose No. 1⁄16 3⁄16 1-½ 11553-ZA304004 11553-ZB304004 ³⁄32 5⁄16 1-½ 11553-ZA304006 11553-ZB304006 1/8 ½ 1-½ 11553-ZA304008 11553-ZB304008 5⁄32 9⁄16 2 11553-ZA304010 11553-ZB304010 3⁄16 5/8 2 11553-ZA304012 11553-ZB304012 7⁄32 5/8 2-½ 11553-ZA304014 11553-ZB304014 1/4 ¾ 2-½ 11553-ZA304016 11553-ZB304016 5⁄16 13⁄16 2-½ 11553-ZA304020 11553-ZB304020 3/8 1 2-½ 11553-ZA304024 11553-ZB304024 7⁄16 1 3 11553-ZA304028 11553-ZB304028 ½ 1 3 11553-ZA304032 11553-ZB304032 9⁄16 1-1/8 3-½ 11553-ZA304036 11553-ZB304036 5/8 1-1/4 3-½ 11553-ZA304040 11553-ZB304040 ¾ 1-½ 4 11553-ZA304048 11553-ZB304048 1 1-½ 4 11553-ZA304064 11553-ZB304064

SPIRAL FLUTE-SEMI-BOTTOMING-COBALT CUT TAPS SERIES 3904 -COARSE

• 40° Helix spiral flute design • ANSI shank and length • Premium cobalt for longer tool life • 2B Class of fit - eliminate the guesswork of finding the H limit • Applications: Steel, carbon steel, structural steel, aluminum, brass, and bronze

Size OAL Flutes Approx Limit Order No. 4-40 1.882 3 H2/H3 11017-90390400284505-40 1.941 3 H2/H3 11017-90390400317506-32 2 3 H3/H4 11017-90390400350508-32 2.13 3 H3/H4 11017-903904004166010-24 2.382 3 H3/H4 11017-903904004826012-24 2.382 3 H3/H4 11017-90390400548601/4-20 2.5 3 H4/H5 11017-90390400635005⁄16-18 2.72 3 H4/H5 11017-90390400793803/8-16 2.941 3 H5/H6 11017-90390400952507⁄16-14 3.157 3 H5/H6 11017-9039040111130½-13 3.381 3 H5/H6 11017-90390401270009⁄16-12 3.591 3 H5/H6 11017-90390401428805/8-11 3.811 3 H5/H6 11017-9039040158750¾-10 4.252 4 H5/H6 11017-90390401905007/8-9 4.689 4 H6/H7 11017-90390402222501-8 5.13 4 H6/H7 11017-9039040254000

SPIRAL FLUTE-SEMI-BOTTOMING-COBALT CUT TAPS SERIES 3903 - METRIC

Size OAL Flutes Approx Limit Order No. M2x0.40 1.752 3 D2/D3 11017-9039030020000M3x0.50 1.941 3 D2/D3 11017-9039030030000M4X 0.70 2.13 3 D3/D4 11017-9039030040000M5x0.80 2.382 3 D3/D4 11017-9039030050000M6x1.00 2.5 3 D4/D5 11017-9039030060000M8x1.25 2.72 3 D4/D5 11017-9039030080000M10x1.5 2.941 3 D4/D5 11017-9039030100000M12x1.75 3.381 3 D5/D6 11017-9039030120000M14x2.00 3.591 3 D5/D6 11017-9039030140000M16x2.00 3.811 3 D6/D7 11017-9039030160000 M18x2.50 4.031 4 D6/D7 11017-9039030180000M20x2.50 4.469 4 D6/D7 11017-9039030200000

• 40° Helix spiral flute design • ANSI shank and length • Premium cobalt for longer tool life • 6H Class of fit - eliminate the guesswork of finding the H limit • Applications: Steel, carbon steel, structural steel, aluminum, brass, and bronze

SILVER & DEMING 1/2" SHANK DRILLS

• All drills have 3” of flute length and are 6” overall • All standard drills have 118° point • All cobalt drills listed have a 118° split point

Size Order No. Cobalt Order No. ³³⁄64 12634-091433 12634-09233317⁄32 12634-091434 12634-09233435⁄64 12634-091435 12634-0923359⁄16 12634-091436 12634-09233637⁄64 12634-091437 12634-09233719⁄32 12634-091438 12634-09233839⁄64 12634-091439 12634-0923395/8 12634-091440 12634-092340⁴¹⁄64 12634-091441 12634-092341²¹⁄32 12634-091442 12634-092342⁴³⁄64 12634-091443 12634-092343¹¹⁄16 12634-091444 12634-09234445⁄64 12634-091445 12634-092345²³⁄32 12634-091446 12634-092346⁴⁷⁄64 12634-091447 12634-092347¾ 12634-091448 12634-092348⁴⁹⁄64 12634-091449 12634-09234925⁄32 12634-091450 12634-092350⁵¹⁄64 12634-091451 12634-092351¹³⁄16 12634-091452 12634-092352⁵³⁄64 12634-091453 12634-092353²⁷⁄32 12634-091454 12634-092354⁵⁵⁄64 12634-091455 12634-0923557/8 12634-091456 12634-092356⁵⁷⁄64 12634-091457 12634-092357²⁹⁄32 12634-091458 12634-092358⁵⁹⁄64 12634-091459 12634-092359¹⁵⁄16 12634-091460 12634-09236061⁄64 12634-091461 12634-092361³¹⁄32 12634-091462 12634-092362⁶³⁄64 12634-091463 12634-0923631 12634-091464 12634-092364Additional sizes available through 1-1/2

Order No. Sale Price11598-10000 $39.50

• 60° Plain type • HSS

5 PC COMBINED DRILL & COUNTERSINK SET

Combined drill and countersinks are designed to produce accurate conical holes in components which require to be machined between centers.

Sale Price$23.75 $22.95 $23.75 $22.95 $26.75 $25.75 $26.75 $25.95 $29.50 $28.50 $29.50 $28.50 $32.75 $31.75 $32.75 $31.75 $36.85 $35.75 $36.95 $35.75 $44.50 $38.15 $44.50 $38.25 $48.95 $43.25 $48.95 $43.15 $58.50 $49.95 $58.50 $49.95

Sale Price$17.75$17.75$13.95$13.95$13.95$14.45$14.95$16.95$20.25$26.50$38.15$35.50$45.85$43.45$67.95$96.50

Sale Price$19.55$17.25$14.15$14.45$14.95$16.95$20.25$26.50$38.50$41.65$42.25$65.50

Sale Price $5.95 $5.95 $5.50 $8.15 $7.75 $11.50 $9.95 $15.75 $18.25 $24.95 $24.95 $45.25 $53.25 $78.95 $125.95

Sale Price$7.25$6.75$6.75$8.95$8.50$12.50$12.25$17.50$21.95$27.95$33.95$44.25$61.75$90.50$142.75

Sale Price$14.75 $14.50 $15.75 $15.50 $16.95 $16.50 $17.75 $17.25 $18.95 $18.50 $19.75 $19.05 $19.95 $19.50 $21.55 $21.00 $23.05 $22.40 $27.00 $23.55 $28.00 $24.50 $29.25 $29.50 $30.50 $26.50 $32.75 $28.85 $34.75 $29.75 $38.50 $33.25

CAT 40 PRECISION ER TOOLHOLDERS

• Balanced to 25,000 rpm at G2.5 • T.I.R. 0.0001” measured from taper to collet pocket

• PowerCOAT nut included for 75% more clamping power

• Techniks holder comes with a complete lap report.

METRIC SIZE PRECISION ER COLLETS

• For use with milling, drilling, tapping or boring operations • Average .0002” T.I.R. • Clamping range .039”

EZ LIFT MATERIAL HANDLING MAGNETS

• .5X max rating for safety • Lift flat or round stock • Capacity to 6,600 lbs

Plate Cap Round Cap A B C D E F G H Weight Order No. 220 lbs 99 lbs 4.2” 3.3” 4.7” 4.9” 2.4” 2.8” 1.6” 1.2” 5.5 lbs 10897-ELM-100660 lbs 300 lbs 7.1” 6.1” 6.1” 7.3” 3.6” 3.7” 2.0” 1.6” 18.9 lbs 10897-ELM-3001,320 lbs 600 lbs 10.0” 8.8” 8.3” 10.2” 4.5” 4.7” 3.0” 2.0” 46 lbs 10897-ELM-6002,200 lbs 990 lbs 11.0” 9.6” 11.3” 14.6” 6.5” 6.7” 3.8” 3.4” 101 lbs 10897-ELM-10004,400 lbs 1,980 lbs 16.6” 15.0” 13.7” 20.2” 8.5” 8.5” 4.1” 4.8” 259 lbs 10897-ELM-20006,600 lbs 2,970 lbs 22.3” 20.9” 15.7” 30.3” 8.5” 8.7” 5.8” 3.2” 399 lbs 10897-ELM-3000

Gage Max NutOrder No. Desc. Length Shank DIA. Hex Nut10897-22213-3 ER11-3 3” .275 0.748 10897-22225 ER16 2.76” .406 1.08 10897-22227 ER16 4” .406 1.08 10897-22231 ER16 6” .406 1.08 10897-22233 ER16 8” .406 1.08 10897-22233-10 ER16 10” .406 1.08 10897-22235 ER20 2.76” .512 1.34 10897-22237 ER20 4” .512 1.34 10897-22239 ER20 6” .512 1.34 10897-22239-10 ER20 10” .512 1.34Slotted Nut10897-22243-2.5 ER25 2.5” .630 1.65 10897-22243 ER25 2.76” .630 1.65 10897-22245 ER25 4” .630 1.65 10897-22247 ER25 6” .630 1.65 10897-22251 ER25 8” .630 1.65 10897-22253 ER25 10” .630 1.65 10897-22255 ER32 2.76” .788 1.97 10897-22257 ER32 6” .788 1.97 10897-22259 ER32 8” .788 1.97 10897-22259-10 ER32 10” .788 1.97 10897-22261 ER40 3.15” 1.023 2.48 10897-22263 ER40 4” 1.023 2.48 10897-22265 ER40 6” 1.023 2.48

MaxPart No. Range Shank ER11 10897-04211-1⁄16 .043-.062 1⁄1610897-04211-3⁄32 .054-.093 3⁄3210897-04211-1/8 .086-.125 1/810897-04211-5⁄32 .117-.156 5⁄3210897-04211-3⁄16 .148-.187 3⁄1610897-04211-7⁄32 .179-.218 7⁄3210897-04211-1/4 .211-.250 1/410897-04211-9⁄32 .242-.281 9⁄32ER16 10897-04216-1⁄16 .043-.062 1⁄1610897-04216-3⁄32 .054-.093 3⁄3210897-04216-1/8 .086-.125 1/810897-04216-5⁄32 .117-.156 5⁄3210897-04216-3⁄16 .148-.187 3⁄1610897-04216-7⁄32 .179-.218 7⁄3210897-04216-1/4 .211-.250 1/410897-04216-9⁄32 .242-.281 9⁄3210897-04216-5⁄16 .273-.312 5⁄1610897-04216-¹¹⁄32 .304-.343 11⁄3210897-04216-3/8 .336-.375 3/810897-04216-¹³⁄32 .367-.406 ¹³⁄32ER2010897-04220-1⁄16 .043-.062 1⁄1610897-04220-3⁄32 .054-.093 3⁄3210897-04220-1/8 .086-.125 1/810897-04220-5⁄32 .117-.156 5⁄3210897-04220-3⁄16 .148-.187 3⁄1610897-04220-7⁄32 .179-.218 7⁄3210897-04220-1/4 .211-.250 1/410897-04220-9⁄32 .242-.281 9⁄3210897-04220-5⁄16 .273-.312 5⁄1610897-04220-¹¹⁄32 .304-.343 ¹¹⁄3210897-04220-3/8 .336-.375 3/810897-04220-¹³⁄32 .367-.406 ¹³⁄3210897-04220-7⁄16 .398-.437 7⁄1610897-04220-¹⁵⁄32 .429-.468 ¹⁵⁄3210897-04220-½ .461-.500 ½ER2510897-04225-3⁄32 .054-.093 3⁄3210897-04225-1/8 .086-.125 1/810897-04225-5⁄32 .117-.156 5⁄3210897-04225-3⁄16 .148-.187 3⁄1610897-04225-7⁄32 .179-.218 7⁄3210897-04225-1/4 .211-.250 1/410897-04225-9⁄32 .242-.281 ⁹⁄3210897-04225-5⁄16 .273-.312 5⁄1610897-04225-¹¹⁄32 .304-.343 ¹¹⁄3210897-04225-3/8 .336-.375 3/810897-04225-¹³⁄32 .367-.406 ¹³⁄3210897-04225-7⁄16 .398-.437 7⁄1610897-04225-¹⁵⁄32 .429-.468 15⁄3210897-04225-½ .461-.500 ½10897-04225-¹⁷⁄32 .492-.531 ¹⁷⁄3210897-04225-9⁄16 .523-.562 9⁄1610897-04225-¹⁹⁄32 .554-.593 19⁄3210897-04225-5/8 .586-.625 5/810897-04225-¾ .711-.750 ¾

MaxPart No. Range Shank ER32 10897-04232-1⁄16 .043-.062 1⁄1610897-04232-³⁄32 .054-.093 3⁄3210897-04232-1/8 .086-.125 1/810897-04232-5⁄32 .117-.156 5⁄3210897-04232-³⁄16 .148-.187 3⁄1610897-04232-7⁄32 .179-.218 7⁄3210897-04232-1/4 .211-.250 1/410897-04232-9⁄32 .242-.281 9⁄3210897-04232-⁵⁄16 .273-.312 5⁄1610897-04232-¹¹⁄32 .304-.343 ¹¹⁄3210897-04232-3/8 .336-.375 3/810897-04232-¹³⁄32 .367-.406 ¹³⁄3210897-04232-7⁄16 .398-.437 7⁄1610897-04232-¹⁵⁄32 .429-.468 15⁄3210897-04232-½ .461-.500 ½10897-04232-¹⁷⁄32 .492-.531 17⁄3210897-04232-⁹⁄16 .523-.562 9⁄1610897-04232-¹⁹⁄32 .554-.593 19⁄32 10897-04232-5/8 .586-.625 5/8 10897-04232-²¹⁄32 .617-.656 ²¹⁄32 10897-04232-¹¹⁄16 .648-.687 ¹¹⁄16 10897-04232-²³⁄32 .679-.718 23⁄3210897-04232-¾ .711-.750 ¾ER4010897-04240-1/8 .086-.125 1/810897-04240-⁵⁄32 .117-.156 5⁄32 10897-04240-3⁄16 .148-.187 3⁄16 10897-04240-⁷⁄32 .179- .218 ⁷⁄32 10897-04240-1/4 .211-.250 1/410897-04240-9⁄32 .242-.281 9⁄32 10897-04240-5⁄16 .273-.312 5⁄16 10897-04240-¹¹⁄32 .304-.343 ¹¹⁄32 10897-04240-3/8 .336-.375 3/8 10897-04240-13⁄32 .367-.406 ¹³⁄32 10897-04240-7⁄16 .398-.437 7⁄16 10897-04240-15⁄32 .429-.468 15⁄32 10897-04240-½ .461-.500 ½ 10897-04240-17⁄32 .492-.531 17⁄3210897-04240-9⁄16 .523-.562 9⁄1610897-04240-19⁄32 .554-.593 19⁄3210897-04240-5/8 .586-.625 5/810897-04240-21⁄32 .617-.656 21⁄3210897-04240-11⁄16 .648-.687 ¹¹⁄1610897-04240-23⁄32 .679-.718 23⁄3210897-04240-¾ .711-.750 ¾10897-04240-25⁄32 .742-.781 25⁄3210897-04240-13⁄16 .773-.812 13⁄16 10897-04240-27⁄32 .807-.843 27⁄32 10897-04240-7/8 .836-.875 7/810897-04240-29⁄32 .867-.906 29⁄3210897-04240-15/16 .898-.937 15⁄1610897-04240-31⁄32 .929-.968 ³¹⁄3210897-04240-1 .961-1.00 1

BEARKAT® SAFETY GLASSES

Standard Clear Lens Order No.11543-BK110 Standard Clear Lens with Anti-Fog Coating 11543-BK110AF

• Unisex styling • Scratch resistant lens • Clear lens and frame • Polycarbonate lens and frame • Full wrap around frame design • 99.99% UVA/UVB protection

Sale Price

$17.25 $16.95 $13.75 $13.75 $13.75 $13.75 $13.75 $16.95

$18.95 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75 $14.75

$18.95 $18.95 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50 $16.50

$19.50 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $19.50

Sale Price

$22.25 $22.25 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95 $16.95

$18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50 $18.50

Sale Price$1.25

$1.75

Sale Price$262.50$595.95$987.95$1,587.95$3,083.75$4,596.75

Sale Price

$107.95 $107.95 $107.95 $121.95 $136.25$167.50$107.95$107.95$126.50$167.50

$107.95$107.95$117.95 $121.95 $135.95 $115.95 $115.95 $131.50 $147.95 $167.50 $121.95 $117.95$143.95

DX6® CROSSOVER® VISE

Order No.10094-DX6

The DX6 CrossOver® vise achieves new levels in precision and performance where flatness and parallelism are important. The DX6 CrossOver® vise features the same bed height and keyway to the stationary jaw face as the D688, a redesigned nut with lighter weight, and a new brush seal design. The bearing pack is larger, stronger, and more durable than previous

designs, and our proprietary AngLock® spherical segment creates all directional alignment and reduces jaw lift for improved performance.

MANUAL 8" VISE WITH 10” OPENING

Kurt D810 vise has a large 10” jaw opening and provides up to 11,600 lbs. of clamping force. The AngLock® design of the stationary jaw reduces vise deflection by 25% while allowing total disassembly of the vise without removing the body from the machine table.The D810 vise locks parts precisely for aggressive “hogging out” operations.

Order No.10094-D810

• Nut is shortened so as to not protrude past the end of the vise body • Powder coat finish resists coolant-induced peeling and corrosion • Hardened vise bed and jaw plates • Patented AngLock® design ensures that the movable jaw doesn’t liftunder heavy clamping

• Special brush seals protect vise screw threads from machined chipsand residue

MANUAL VERSATILELOCK® 6" VISE

The original Kurt Anglock vises are designed for precision clamping. The “pull type” action of the 3600 Versatile lock design reduces jaw stationary deflection by at least 80%. This vise has a one-piece body and stationary jaw design which reduces weight

and increases strength while providing .0005 clamping repeatability. It offers ultra-high precision through many important features. This is the finest in CNC vises.

Order No.10094-3600V

• Ground sides that allow side mounting • Upright and back to back mounting • Using the body through holes allows side by side mounting • .0005 clamping repeatability.

Each set includes: • Die stock, tap wrenches, and screw pitch gage.All in molded plastic case.

• Plug Tap and 5/8” Hex Dies in sizes: 4-40, 6-32,8-32, 10-24, 10-32, 12-24

• Fractional plug taps and 1” Hex Dies in sizes:1/4-20, 1/4-28, 5⁄16-18, 5⁄16-24, 3/8-16, 3/8-24, 7⁄16-14,7⁄16-20, ½-13-½-20

• Metric plug tap and 5/8” hex dies in sizes:M3x.5, M4X.7, M4X.75, M5X.8, M5X.9, M6X1.0

• Metric plug tap and 1” hex dies in sizes:M7x1.0, M8x1.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75

• Pipe thread taps and 1” hex dies in sizes: 1/8-27 NPT, 1/8-28 BSPthreading tools

• Adjustable die stock for up to 1” Dies, plain die stock; 5/8” hex dies,adjustable tap wrench for taps no 0 – ½, two in one tap wrenchfor taps 1/4 - ½”, T-handle wrench for taps no 0 – 1/4” ; 16 leaf metricthread pitch gage, 18 leaf standard thread pitch gage.

CARBON STEEL TAP AND HEX DIE SETS 76 PC. FRACTIONAL AND METRIC

Order No. Graduations 11967-182-105 1⁄32, 1⁄64, 1mm, 0.5mm 11967-182-106 1⁄50, 1⁄100, 1mm, 0.5mm 11967-182-107 1⁄10, 1⁄100, 1mm, 0.5mm Full Flex Rules11967-182-201 1/8, 1⁄16, 1⁄32, 1⁄64 11967-182-205 1⁄32, 1⁄64, 1mm, 0.5mm 11967-182-206 1⁄50, 1⁄100, 1mm, 0.5mm 11967-182-207 1⁄10, 1⁄100, 1mm, 0.5mm (Satin chrome, stainless tempered, black chrome rule)

6" SCALES

• 182-1—series ¾” width • 182-2—series ½” width (Full flexible rules)

MANGO II DEBURRING SETS

Style Description Order No.B Standard duty; for holes, slots, and edges 11961-90056E Heavy duty; for holes, slots and edges 11961-90065 F Chamfering and cleaning pipes, tubes and holes 11961-90071

All sets come with extra reach handles. “B” comes with (1) B10 & (1) B20 blade“E” set comes with (1) E100,(1) E200 & (1) E300 blades“F” set comes with (1) F20countersinking blade

Order No. 11548-26376

MICHIGAN LOCATION: KENTUCKY LOCATION:13870 CAVALIERE DRIVE 2041 CLAY STREET SHELBY TOWNSHIP, MI 48315 HENDERSON, KY 42420

Sale Price$589.95

Sale Price$1,579.95

Sale Price$12.95$18.95$12.95

$12.50$12.50$12.50$12.50

Sale Price$224.95

Sale Price$824.95

Sale Price$9.50 $11.05 $35.25

EXPIRES MAY 31, 2020